/*
 * Copyright 2020 Scalys B.V.
 * opensource@scalys.com
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <i2c.h>
#include <hwconfig.h>
#include <asm/mmu.h>
#include <fsl_ddr_sdram.h>
#include <fsl_ddr_dimm_params.h>
#include <asm/fsl_law.h>
 
DECLARE_GLOBAL_DATA_PTR;
 
/* Values for QT1040 */ 
dimm_params_t ddr_raw_timing = {
	.n_ranks = 1,
	.rank_density = 1073741824u,
	.capacity = 1073741824u,
	.device_width = 16,
	.primary_sdram_width = 64,
	.ec_sdram_width = 8,
	.registered_dimm = 0,
	.mirrored_dimm = 0,
	.n_row_addr = 14,
	.n_col_addr = 10,
	.n_banks_per_sdram_device = 8,
	.edc_config = 2,
	.burst_lengths_bitmask = 0x0c,
	.tckmin_x_ps = 1250,
	.caslat_x = (0x7fe << 4),
	.taa_ps = 13750,
	.twr_ps = 15000,
	.trcd_ps = 13750,
	.trrd_ps = 7500,
	.trp_ps = 13750,
	.tras_ps = 37500,
	.trc_ps = 50600,
	.trfc_ps = 160000,
	.twtr_ps = 7500,
	.trtp_ps = 7500,
	.refresh_rate_ps = 3900000,
	.tfaw_ps = 50000,
};

void fsl_ddr_board_options(memctl_options_t *popts,
			   dimm_params_t *pdimm,
			   unsigned int ctrl_num)
{
	int i;
	
	if (ctrl_num != 0) {
		printf("Only 1 memory controller supported, but %i requested\n",
		       ctrl_num);
		return; 
	}
	
	if (pdimm == NULL ) {
		printf("Error, no valid dimm pararmeter supplied\n");
		return;
	}

	if (!pdimm->n_ranks) {
		printf("No ranks in dimm parameters. Configuration error?\n");
		return;
	}
	
	/* DDR speed is fixed in the RCW */

	/* set odt_rd_cfg and odt_wr_cfg. */
	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
		popts->cs_local_opts[i].odt_wr_cfg = 4;
	}
	
	popts->half_strength_driver_enable = 0; /* */

	popts->wrlvl_en = 1;
	popts->wrlvl_override = 1;
	popts->wrlvl_sample = 0xf;
	popts->wrlvl_start  = 5;
	popts->wrlvl_ctl_2 = 0x05050506;
	popts->wrlvl_ctl_3 = 0x06060605; /* 1333MT/s */
	
 	popts->ddr_cdr1 = 0x800c0000;
 	popts->ddr_cdr2 = 0x00000001;
	
	/*
	 * rtt and rtt_wr override
	 */
	popts->rtt_override = 0; /* */
	
	/* Enable ZQ calibration */
	popts->zq_en = 1; /* */

	/* Clock is launched 1/2 applied cycle after address/command */
	popts->clk_adjust = 4; 
	
	/* Optimized cpo */
	popts->cpo_sample = 0x33;
}

int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
			    unsigned int controller_number,
			    unsigned int dimm_number)
{
	const char dimm_model[] = "Soldered DDR3L";
	
	if (((controller_number == 0) && (dimm_number == 0)) ||
		((controller_number == 1) && (dimm_number == 0))) {
		memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
		memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
		memcpy(pdimm->mpart, dimm_model, sizeof(pdimm->mpart) - 1);
	}
	
	return 0;
}

int dram_init(void)
{
	phys_size_t dram_size;

#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
	dram_size = fsl_ddr_sdram();
	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
	dram_size *= 0x100000;
#else
	/* DDR has been initialised by SPL loader */
	dram_size =  fsl_ddr_sdram_size();
#endif

	gd->ram_size = dram_size;
	
	return 0;
}