diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-06-28 18:14:55 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-06-28 18:14:55 (GMT) |
commit | 04b905942b482092a547798a2477f21e32a8f65d (patch) | |
tree | 9ad2837587f5ce284f830432fec3569ecf44fbcb | |
parent | d90ce8711ceb516de823ae878270e5a21d11dede (diff) | |
parent | 3bc46b312b1486b1fe2db4246a34a30160d26d8d (diff) | |
download | linux-fsl-qoriq-04b905942b482092a547798a2477f21e32a8f65d.tar.xz |
Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
serial: bcm63xx_uart: fix irq storm after rx fifo overrun.
amba pl011: platform data for reg lockup and glitch v2
amba pl011: workaround for uart registers lockup
tty: n_gsm: improper skb_pull() use was leaking framed data
tty: n_gsm: Fixed logic to decode break signal from modem status
TTY: ntty, add one more sanity check
TTY: ldisc, do not close until there are readers
8250: Fix capabilities when changing the port type
8250_pci: Fix missing const from merges
ARM: SAMSUNG: serial: Fix on handling of one clock source for UART
serial: ioremap warning fix for jsm driver.
8250_pci: add -ENODEV code for Intel EG20T PCH
-rw-r--r-- | arch/arm/mach-exynos4/init.c | 1 | ||||
-rw-r--r-- | arch/arm/mach-ux500/board-mop500-pins.c | 16 | ||||
-rw-r--r-- | arch/arm/mach-ux500/board-mop500.c | 54 | ||||
-rw-r--r-- | arch/arm/plat-samsung/include/plat/regs-serial.h | 2 | ||||
-rw-r--r-- | drivers/tty/n_gsm.c | 26 | ||||
-rw-r--r-- | drivers/tty/n_tty.c | 1 | ||||
-rw-r--r-- | drivers/tty/serial/8250.c | 1 | ||||
-rw-r--r-- | drivers/tty/serial/8250_pci.c | 59 | ||||
-rw-r--r-- | drivers/tty/serial/amba-pl011.c | 123 | ||||
-rw-r--r-- | drivers/tty/serial/bcm63xx_uart.c | 18 | ||||
-rw-r--r-- | drivers/tty/serial/jsm/jsm_driver.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/s5pv210.c | 4 | ||||
-rw-r--r-- | drivers/tty/tty_ldisc.c | 4 | ||||
-rw-r--r-- | include/linux/amba/serial.h | 3 |
14 files changed, 295 insertions, 19 deletions
diff --git a/arch/arm/mach-exynos4/init.c b/arch/arm/mach-exynos4/init.c index cf91f50..a8a83e3 100644 --- a/arch/arm/mach-exynos4/init.c +++ b/arch/arm/mach-exynos4/init.c @@ -35,6 +35,7 @@ void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) tcfg->clocks = exynos4_serial_clocks; tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks); } + tcfg->flags |= NO_NEED_CHECK_CLKSRC; } s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index fd4cf1c..70cdbd6 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -110,10 +110,18 @@ static pin_cfg_t mop500_pins_common[] = { GPIO168_KP_O0, /* UART */ - GPIO0_U0_CTSn | PIN_INPUT_PULLUP, - GPIO1_U0_RTSn | PIN_OUTPUT_HIGH, - GPIO2_U0_RXD | PIN_INPUT_PULLUP, - GPIO3_U0_TXD | PIN_OUTPUT_HIGH, + /* uart-0 pins gpio configuration should be + * kept intact to prevent glitch in tx line + * when tty dev is opened. Later these pins + * are configured to uart mop500_pins_uart0 + * + * It will be replaced with uart configuration + * once the issue is solved. + */ + GPIO0_GPIO | PIN_INPUT_PULLUP, + GPIO1_GPIO | PIN_OUTPUT_HIGH, + GPIO2_GPIO | PIN_INPUT_PULLUP, + GPIO3_GPIO | PIN_OUTPUT_HIGH, GPIO29_U2_RXD | PIN_INPUT_PULLUP, GPIO30_U2_TXD | PIN_OUTPUT_HIGH, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index bb26f40..2a08c07 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -27,18 +27,21 @@ #include <linux/leds-lp5521.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/delay.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <plat/i2c.h> #include <plat/ste_dma40.h> +#include <plat/pincfg.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> #include <mach/irqs.h> +#include "pins-db8500.h" #include "ste-dma40-db8500.h" #include "devices-db8500.h" #include "board-mop500.h" @@ -393,12 +396,63 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = { }; #endif + +static pin_cfg_t mop500_pins_uart0[] = { + GPIO0_U0_CTSn | PIN_INPUT_PULLUP, + GPIO1_U0_RTSn | PIN_OUTPUT_HIGH, + GPIO2_U0_RXD | PIN_INPUT_PULLUP, + GPIO3_U0_TXD | PIN_OUTPUT_HIGH, +}; + +#define PRCC_K_SOFTRST_SET 0x18 +#define PRCC_K_SOFTRST_CLEAR 0x1C +static void ux500_uart0_reset(void) +{ + void __iomem *prcc_rst_set, *prcc_rst_clr; + + prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + + PRCC_K_SOFTRST_SET); + prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + + PRCC_K_SOFTRST_CLEAR); + + /* Activate soft reset PRCC_K_SOFTRST_CLEAR */ + writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr); + udelay(1); + + /* Release soft reset PRCC_K_SOFTRST_SET */ + writel((readl(prcc_rst_set) | 0x1), prcc_rst_set); + udelay(1); +} + +static void ux500_uart0_init(void) +{ + int ret; + + ret = nmk_config_pins(mop500_pins_uart0, + ARRAY_SIZE(mop500_pins_uart0)); + if (ret < 0) + pr_err("pl011: uart pins_enable failed\n"); +} + +static void ux500_uart0_exit(void) +{ + int ret; + + ret = nmk_config_pins_sleep(mop500_pins_uart0, + ARRAY_SIZE(mop500_pins_uart0)); + if (ret < 0) + pr_err("pl011: uart pins_disable failed\n"); +} + static struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, .dma_tx_param = &uart0_dma_cfg_tx, #endif + .init = ux500_uart0_init, + .exit = ux500_uart0_exit, + .reset = ux500_uart0_reset, }; static struct amba_pl011_data uart1_plat = { diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index c151c5f..116edfe 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -224,6 +224,8 @@ #define S5PV210_UFSTAT_RXMASK (255<<0) #define S5PV210_UFSTAT_RXSHIFT (0) +#define NO_NEED_CHECK_CLKSRC 1 + #ifndef __ASSEMBLY__ /* struct s3c24xx_uart_clksrc diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 09e8c7d..19b4ae0 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -875,7 +875,8 @@ static int gsm_dlci_data_output_framed(struct gsm_mux *gsm, *dp++ = last << 7 | first << 6 | 1; /* EA */ len--; } - memcpy(dp, skb_pull(dlci->skb, len), len); + memcpy(dp, dlci->skb->data, len); + skb_pull(dlci->skb, len); __gsm_data_queue(dlci, msg); if (last) dlci->skb = NULL; @@ -984,10 +985,22 @@ static void gsm_control_reply(struct gsm_mux *gsm, int cmd, u8 *data, */ static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci, - u32 modem) + u32 modem, int clen) { int mlines = 0; - u8 brk = modem >> 6; + u8 brk = 0; + + /* The modem status command can either contain one octet (v.24 signals) + or two octets (v.24 signals + break signals). The length field will + either be 2 or 3 respectively. This is specified in section + 5.4.6.3.7 of the 27.010 mux spec. */ + + if (clen == 2) + modem = modem & 0x7f; + else { + brk = modem & 0x7f; + modem = (modem >> 7) & 0x7f; + }; /* Flow control/ready to communicate */ if (modem & MDM_FC) { @@ -1061,7 +1074,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen) return; } tty = tty_port_tty_get(&dlci->port); - gsm_process_modem(tty, dlci, modem); + gsm_process_modem(tty, dlci, modem, clen); if (tty) { tty_wakeup(tty); tty_kref_put(tty); @@ -1482,12 +1495,13 @@ static void gsm_dlci_begin_close(struct gsm_dlci *dlci) * open we shovel the bits down it, if not we drop them. */ -static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len) +static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int clen) { /* krefs .. */ struct tty_port *port = &dlci->port; struct tty_struct *tty = tty_port_tty_get(port); unsigned int modem = 0; + int len = clen; if (debug & 16) pr_debug("%d bytes for tty %p\n", len, tty); @@ -1507,7 +1521,7 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len) if (len == 0) return; } - gsm_process_modem(tty, dlci, modem); + gsm_process_modem(tty, dlci, modem, clen); /* Line state will go via DLCI 0 controls only */ case 1: default: diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 0ad3288..c3954fb 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1815,6 +1815,7 @@ do_it_again: /* FIXME: does n_tty_set_room need locking ? */ n_tty_set_room(tty); timeout = schedule_timeout(timeout); + BUG_ON(!tty->read_buf); continue; } __set_current_state(TASK_RUNNING); diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index b40f7b9..b4129f5 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -3318,6 +3318,7 @@ void serial8250_unregister_port(int line) uart->port.flags &= ~UPF_BOOT_AUTOCONF; uart->port.type = PORT_UNKNOWN; uart->port.dev = &serial8250_isa_devs->dev; + uart->capabilities = uart_config[uart->port.type].flags; uart_add_one_port(&serial8250_reg, &uart->port); } else { uart->port.dev = NULL; diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index 78e98a5..f41b425 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -994,6 +994,15 @@ static int skip_tx_en_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } +static int pci_eg20t_init(struct pci_dev *dev) +{ +#if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) + return -ENODEV; +#else + return 0; +#endif +} + /* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B @@ -1446,6 +1455,56 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .init = pci_oxsemi_tornado_init, .setup = pci_default_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8811, + .init = pci_eg20t_init, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8812, + .init = pci_eg20t_init, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8813, + .init = pci_eg20t_init, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = 0x8814, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x8027, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x8028, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x8029, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x800C, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x800D, + .init = pci_eg20t_init, + }, + { + .vendor = 0x10DB, + .device = 0x800D, + .init = pci_eg20t_init, + }, /* * Cronyx Omega PCI (PLX-chip based) */ diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 8dc0541..f5f6831 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -50,6 +50,7 @@ #include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/scatterlist.h> +#include <linux/delay.h> #include <asm/io.h> #include <asm/sizes.h> @@ -65,6 +66,30 @@ #define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) #define UART_DUMMY_DR_RX (1 << 16) + +#define UART_WA_SAVE_NR 14 + +static void pl011_lockup_wa(unsigned long data); +static const u32 uart_wa_reg[UART_WA_SAVE_NR] = { + ST_UART011_DMAWM, + ST_UART011_TIMEOUT, + ST_UART011_LCRH_RX, + UART011_IBRD, + UART011_FBRD, + ST_UART011_LCRH_TX, + UART011_IFLS, + ST_UART011_XFCR, + ST_UART011_XON1, + ST_UART011_XON2, + ST_UART011_XOFF1, + ST_UART011_XOFF2, + UART011_CR, + UART011_IMSC +}; + +static u32 uart_wa_regdata[UART_WA_SAVE_NR]; +static DECLARE_TASKLET(pl011_lockup_tlet, pl011_lockup_wa, 0); + /* There is by now at least one vendor with differing details, so handle it */ struct vendor_data { unsigned int ifls; @@ -72,6 +97,7 @@ struct vendor_data { unsigned int lcrh_tx; unsigned int lcrh_rx; bool oversampling; + bool interrupt_may_hang; /* vendor-specific */ bool dma_threshold; }; @@ -90,9 +116,12 @@ static struct vendor_data vendor_st = { .lcrh_tx = ST_UART011_LCRH_TX, .lcrh_rx = ST_UART011_LCRH_RX, .oversampling = true, + .interrupt_may_hang = true, .dma_threshold = true, }; +static struct uart_amba_port *amba_ports[UART_NR]; + /* Deals with DMA transactions */ struct pl011_sgbuf { @@ -132,6 +161,7 @@ struct uart_amba_port { unsigned int lcrh_rx; /* vendor-specific */ bool autorts; char type[12]; + bool interrupt_may_hang; /* vendor-specific */ #ifdef CONFIG_DMA_ENGINE /* DMA stuff */ bool using_tx_dma; @@ -1008,6 +1038,68 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap) #endif +/* + * pl011_lockup_wa + * This workaround aims to break the deadlock situation + * when after long transfer over uart in hardware flow + * control, uart interrupt registers cannot be cleared. + * Hence uart transfer gets blocked. + * + * It is seen that during such deadlock condition ICR + * don't get cleared even on multiple write. This leads + * pass_counter to decrease and finally reach zero. This + * can be taken as trigger point to run this UART_BT_WA. + * + */ +static void pl011_lockup_wa(unsigned long data) +{ + struct uart_amba_port *uap = amba_ports[0]; + void __iomem *base = uap->port.membase; + struct circ_buf *xmit = &uap->port.state->xmit; + struct tty_struct *tty = uap->port.state->port.tty; + int buf_empty_retries = 200; + int loop; + + /* Stop HCI layer from submitting data for tx */ + tty->hw_stopped = 1; + while (!uart_circ_empty(xmit)) { + if (buf_empty_retries-- == 0) + break; + udelay(100); + } + + /* Backup registers */ + for (loop = 0; loop < UART_WA_SAVE_NR; loop++) + uart_wa_regdata[loop] = readl(base + uart_wa_reg[loop]); + + /* Disable UART so that FIFO data is flushed out */ + writew(0x00, uap->port.membase + UART011_CR); + + /* Soft reset UART module */ + if (uap->port.dev->platform_data) { + struct amba_pl011_data *plat; + + plat = uap->port.dev->platform_data; + if (plat->reset) + plat->reset(); + } + + /* Restore registers */ + for (loop = 0; loop < UART_WA_SAVE_NR; loop++) + writew(uart_wa_regdata[loop] , + uap->port.membase + uart_wa_reg[loop]); + + /* Initialise the old status of the modem signals */ + uap->old_status = readw(uap->port.membase + UART01x_FR) & + UART01x_FR_MODEM_ANY; + + if (readl(base + UART011_MIS) & 0x2) + printk(KERN_EMERG "UART_BT_WA: ***FAILED***\n"); + + /* Start Tx/Rx */ + tty->hw_stopped = 0; +} + static void pl011_stop_tx(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; @@ -1158,8 +1250,11 @@ static irqreturn_t pl011_int(int irq, void *dev_id) if (status & UART011_TXIS) pl011_tx_chars(uap); - if (pass_counter-- == 0) + if (pass_counter-- == 0) { + if (uap->interrupt_may_hang) + tasklet_schedule(&pl011_lockup_tlet); break; + } status = readw(uap->port.membase + UART011_MIS); } while (status != 0); @@ -1339,6 +1434,14 @@ static int pl011_startup(struct uart_port *port) writew(uap->im, uap->port.membase + UART011_IMSC); spin_unlock_irq(&uap->port.lock); + if (uap->port.dev->platform_data) { + struct amba_pl011_data *plat; + + plat = uap->port.dev->platform_data; + if (plat->init) + plat->init(); + } + return 0; clk_dis: @@ -1394,6 +1497,15 @@ static void pl011_shutdown(struct uart_port *port) * Shut down the clock producer */ clk_disable(uap->clk); + + if (uap->port.dev->platform_data) { + struct amba_pl011_data *plat; + + plat = uap->port.dev->platform_data; + if (plat->exit) + plat->exit(); + } + } static void @@ -1700,6 +1812,14 @@ static int __init pl011_console_setup(struct console *co, char *options) if (!uap) return -ENODEV; + if (uap->port.dev->platform_data) { + struct amba_pl011_data *plat; + + plat = uap->port.dev->platform_data; + if (plat->init) + plat->init(); + } + uap->port.uartclk = clk_get_rate(uap->clk); if (options) @@ -1774,6 +1894,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) uap->lcrh_rx = vendor->lcrh_rx; uap->lcrh_tx = vendor->lcrh_tx; uap->fifosize = vendor->fifosize; + uap->interrupt_may_hang = vendor->interrupt_may_hang; uap->port.dev = &dev->dev; uap->port.mapbase = dev->res.start; uap->port.membase = base; diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c index a1a0e55..c0b68b9 100644 --- a/drivers/tty/serial/bcm63xx_uart.c +++ b/drivers/tty/serial/bcm63xx_uart.c @@ -250,6 +250,20 @@ static void bcm_uart_do_rx(struct uart_port *port) /* get overrun/fifo empty information from ier * register */ iestat = bcm_uart_readl(port, UART_IR_REG); + + if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) { + unsigned int val; + + /* fifo reset is required to clear + * interrupt */ + val = bcm_uart_readl(port, UART_CTL_REG); + val |= UART_CTL_RSTRXFIFO_MASK; + bcm_uart_writel(port, val, UART_CTL_REG); + + port->icount.overrun++; + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY))) break; @@ -284,10 +298,6 @@ static void bcm_uart_do_rx(struct uart_port *port) if (uart_handle_sysrq_char(port, c)) continue; - if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) { - port->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } if ((cstat & port->ignore_status_mask) == 0) tty_insert_flip_char(tty, c, flag); diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c index 18f5484..96da178 100644 --- a/drivers/tty/serial/jsm/jsm_driver.c +++ b/drivers/tty/serial/jsm/jsm_driver.c @@ -125,7 +125,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device brd->bd_uart_offset = 0x200; brd->bd_dividend = 921600; - brd->re_map_membase = ioremap(brd->membase, 0x1000); + brd->re_map_membase = ioremap(brd->membase, pci_resource_len(pdev, 0)); if (!brd->re_map_membase) { dev_err(&pdev->dev, "card has no PCI Memory resources, " diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c index fb2619f..dd194dc 100644 --- a/drivers/tty/serial/s5pv210.c +++ b/drivers/tty/serial/s5pv210.c @@ -30,7 +30,7 @@ static int s5pv210_serial_setsource(struct uart_port *port, struct s3c2410_uartcfg *cfg = port->dev->platform_data; unsigned long ucon = rd_regl(port, S3C2410_UCON); - if ((cfg->clocks_size) == 1) + if (cfg->flags & NO_NEED_CHECK_CLKSRC) return 0; if (strcmp(clk->name, "pclk") == 0) @@ -55,7 +55,7 @@ static int s5pv210_serial_getsource(struct uart_port *port, clk->divisor = 1; - if ((cfg->clocks_size) == 1) + if (cfg->flags & NO_NEED_CHECK_CLKSRC) return 0; switch (ucon & S5PV210_UCON_CLKMASK) { diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 5d01d32..ef925d5 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -555,7 +555,7 @@ static void tty_ldisc_flush_works(struct tty_struct *tty) static int tty_ldisc_wait_idle(struct tty_struct *tty) { int ret; - ret = wait_event_interruptible_timeout(tty_ldisc_idle, + ret = wait_event_timeout(tty_ldisc_idle, atomic_read(&tty->ldisc->users) == 1, 5 * HZ); if (ret < 0) return ret; @@ -763,6 +763,8 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc) if (IS_ERR(ld)) return -1; + WARN_ON_ONCE(tty_ldisc_wait_idle(tty)); + tty_ldisc_close(tty, tty->ldisc); tty_ldisc_put(tty->ldisc); tty->ldisc = NULL; diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 5479fdc..514ed45 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -201,6 +201,9 @@ struct amba_pl011_data { bool (*dma_filter)(struct dma_chan *chan, void *filter_param); void *dma_rx_param; void *dma_tx_param; + void (*init) (void); + void (*exit) (void); + void (*reset) (void); }; #endif |