diff options
author | Harvey Harrison <harvey.harrison@gmail.com> | 2008-05-14 23:17:00 (GMT) |
---|---|---|
committer | Jeff Garzik <jgarzik@redhat.com> | 2008-05-19 21:30:32 (GMT) |
commit | 07633b5d0723ce2ec31262e1096dcf61311bf078 (patch) | |
tree | d7df0c597f64b23d684e9cc492c8ee803acf21a2 | |
parent | 06aaca3f6301d04463b1ee0eb75c0352147159f2 (diff) | |
download | linux-fsl-qoriq-07633b5d0723ce2ec31262e1096dcf61311bf078.tar.xz |
ata: remove FIT() macro
Use the kernel-provided clamp_val() macro.
FIT was always applied to a member of struct ata_timing (unsigned short)
and two constants. clamp_val will not cast to short anymore.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-rw-r--r-- | drivers/ata/pata_ali.c | 10 | ||||
-rw-r--r-- | drivers/ata/pata_amd.c | 14 | ||||
-rw-r--r-- | drivers/ata/pata_cypress.c | 8 | ||||
-rw-r--r-- | drivers/ata/pata_legacy.c | 50 | ||||
-rw-r--r-- | drivers/ata/pata_ns87410.c | 6 | ||||
-rw-r--r-- | drivers/ata/pata_ns87415.c | 4 | ||||
-rw-r--r-- | drivers/ata/pata_qdi.c | 16 | ||||
-rw-r--r-- | drivers/ata/pata_via.c | 14 | ||||
-rw-r--r-- | drivers/ata/pata_winbond.c | 6 | ||||
-rw-r--r-- | include/linux/libata.h | 2 |
10 files changed, 64 insertions, 66 deletions
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index fcabe46..0f3e659 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -177,11 +177,11 @@ static void ali_program_modes(struct ata_port *ap, struct ata_device *adev, stru u8 udma; if (t != NULL) { - t->setup = FIT(t->setup, 1, 8) & 7; - t->act8b = FIT(t->act8b, 1, 8) & 7; - t->rec8b = FIT(t->rec8b, 1, 16) & 15; - t->active = FIT(t->active, 1, 8) & 7; - t->recover = FIT(t->recover, 1, 16) & 15; + t->setup = clamp_val(t->setup, 1, 8) & 7; + t->act8b = clamp_val(t->act8b, 1, 8) & 7; + t->rec8b = clamp_val(t->rec8b, 1, 16) & 15; + t->active = clamp_val(t->active, 1, 8) & 7; + t->recover = clamp_val(t->recover, 1, 16) & 15; pci_write_config_byte(pdev, cas, t->setup); pci_write_config_byte(pdev, cbt, (t->act8b << 4) | t->rec8b); diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 26665c3..57dd00f 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -84,32 +84,32 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse /* Configure the address set up timing */ pci_read_config_byte(pdev, offset + 0x0C, &t); - t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(at.setup, 1, 4) - 1) << ((3 - dn) << 1)); + t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(at.setup, 1, 4) - 1) << ((3 - dn) << 1)); pci_write_config_byte(pdev, offset + 0x0C , t); /* Configure the 8bit I/O timing */ pci_write_config_byte(pdev, offset + 0x0E + (1 - (dn >> 1)), - ((FIT(at.act8b, 1, 16) - 1) << 4) | (FIT(at.rec8b, 1, 16) - 1)); + ((clamp_val(at.act8b, 1, 16) - 1) << 4) | (clamp_val(at.rec8b, 1, 16) - 1)); /* Drive timing */ pci_write_config_byte(pdev, offset + 0x08 + (3 - dn), - ((FIT(at.active, 1, 16) - 1) << 4) | (FIT(at.recover, 1, 16) - 1)); + ((clamp_val(at.active, 1, 16) - 1) << 4) | (clamp_val(at.recover, 1, 16) - 1)); switch (clock) { case 1: - t = at.udma ? (0xc0 | (FIT(at.udma, 2, 5) - 2)) : 0x03; + t = at.udma ? (0xc0 | (clamp_val(at.udma, 2, 5) - 2)) : 0x03; break; case 2: - t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 2, 10)]) : 0x03; + t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 2, 10)]) : 0x03; break; case 3: - t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 10)]) : 0x03; + t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 10)]) : 0x03; break; case 4: - t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 15)]) : 0x03; + t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 15)]) : 0x03; break; default: diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index a9c3218..2ff6260 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -62,14 +62,14 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev) return; } - time_16 = FIT(t.recover, 0, 15) | (FIT(t.active, 0, 15) << 4); - time_8 = FIT(t.act8b, 0, 15) | (FIT(t.rec8b, 0, 15) << 4); + time_16 = clamp_val(t.recover, 0, 15) | (clamp_val(t.active, 0, 15) << 4); + time_8 = clamp_val(t.act8b, 0, 15) | (clamp_val(t.rec8b, 0, 15) << 4); if (adev->devno == 0) { pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); addr &= ~0x0F; /* Mask bits */ - addr |= FIT(t.setup, 0, 15); + addr |= clamp_val(t.setup, 0, 15); pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16); @@ -79,7 +79,7 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev) pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); addr &= ~0xF0; /* Mask bits */ - addr |= (FIT(t.setup, 0, 15) << 4); + addr |= (clamp_val(t.setup, 0, 15) << 4); pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16); diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 7af4b29..fe7cc8e 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -343,8 +343,8 @@ static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev) /* Get the timing data in cycles. For now play safe at 50Mhz */ ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); - active = FIT(t.active, 2, 15); - recover = FIT(t.recover, 4, 15); + active = clamp_val(t.active, 2, 15); + recover = clamp_val(t.recover, 4, 15); inb(0x3E6); inb(0x3E6); @@ -377,8 +377,8 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev) /* Get the timing data in cycles. For now play safe at 50Mhz */ ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000); - active = FIT(t.active, 2, 15); - recover = FIT(t.recover, 2, 16); + active = clamp_val(t.active, 2, 15); + recover = clamp_val(t.recover, 2, 16); recover &= 0x15; inb(0x3E6); @@ -462,9 +462,9 @@ static void opti82c611a_set_piomode(struct ata_port *ap, ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); } - active = FIT(t.active, 2, 17) - 2; - recover = FIT(t.recover, 1, 16) - 1; - setup = FIT(t.setup, 1, 4) - 1; + active = clamp_val(t.active, 2, 17) - 2; + recover = clamp_val(t.recover, 1, 16) - 1; + setup = clamp_val(t.setup, 1, 4) - 1; /* Select the right timing bank for write timing */ rc = ioread8(ap->ioaddr.lbal_addr); @@ -541,9 +541,9 @@ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev) ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); } - active = FIT(t.active, 2, 17) - 2; - recover = FIT(t.recover, 1, 16) - 1; - setup = FIT(t.setup, 1, 4) - 1; + active = clamp_val(t.active, 2, 17) - 2; + recover = clamp_val(t.recover, 1, 16) - 1; + setup = clamp_val(t.setup, 1, 4) - 1; /* Select the right timing bank for write timing */ rc = ioread8(ap->ioaddr.lbal_addr); @@ -624,11 +624,11 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); if (ld_qdi->fast) { - active = 8 - FIT(t.active, 1, 8); - recovery = 18 - FIT(t.recover, 3, 18); + active = 8 - clamp_val(t.active, 1, 8); + recovery = 18 - clamp_val(t.recover, 3, 18); } else { - active = 9 - FIT(t.active, 2, 9); - recovery = 15 - FIT(t.recover, 0, 15); + active = 9 - clamp_val(t.active, 2, 9); + recovery = 15 - clamp_val(t.recover, 0, 15); } timing = (recovery << 4) | active | 0x08; @@ -658,11 +658,11 @@ static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev) ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); if (ld_qdi->fast) { - active = 8 - FIT(t.active, 1, 8); - recovery = 18 - FIT(t.recover, 3, 18); + active = 8 - clamp_val(t.active, 1, 8); + recovery = 18 - clamp_val(t.recover, 3, 18); } else { - active = 9 - FIT(t.active, 2, 9); - recovery = 15 - FIT(t.recover, 0, 15); + active = 9 - clamp_val(t.active, 2, 9); + recovery = 15 - clamp_val(t.recover, 0, 15); } timing = (recovery << 4) | active | 0x08; @@ -695,11 +695,11 @@ static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); if (ld_qdi->fast) { - active = 8 - FIT(t.active, 1, 8); - recovery = 18 - FIT(t.recover, 3, 18); + active = 8 - clamp_val(t.active, 1, 8); + recovery = 18 - clamp_val(t.recover, 3, 18); } else { - active = 9 - FIT(t.active, 2, 9); - recovery = 15 - FIT(t.recover, 0, 15); + active = 9 - clamp_val(t.active, 2, 9); + recovery = 15 - clamp_val(t.recover, 0, 15); } timing = (recovery << 4) | active | 0x08; ld_qdi->clock[adev->devno] = timing; @@ -830,8 +830,8 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) else ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); - active = (FIT(t.active, 3, 17) - 1) & 0x0F; - recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F; + active = (clamp_val(t.active, 3, 17) - 1) & 0x0F; + recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F; timing = (active << 4) | recovery; winbond_writecfg(ld_winbond->timing, timing, reg); @@ -842,7 +842,7 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) reg |= 0x08; /* FIFO off */ if (!ata_pio_need_iordy(adev)) reg |= 0x02; /* IORDY off */ - reg |= (FIT(t.setup, 0, 3) << 6); + reg |= (clamp_val(t.setup, 0, 3) << 6); winbond_writecfg(ld_winbond->timing, timing + 1, reg); } diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index 76d2455..be756b7 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c @@ -91,9 +91,9 @@ static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev) return; } - at.active = FIT(at.active, 2, 16) - 2; - at.setup = FIT(at.setup, 1, 4) - 1; - at.recover = FIT(at.recover, 1, 12) - 1; + at.active = clamp_val(at.active, 2, 16) - 2; + at.setup = clamp_val(at.setup, 1, 4) - 1; + at.recover = clamp_val(at.recover, 1, 12) - 1; idetcr = (at.setup << 6) | (recoverbits[at.recover] << 3) | activebits[at.active]; diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c index ae92b00..e0aa7ea 100644 --- a/drivers/ata/pata_ns87415.c +++ b/drivers/ata/pata_ns87415.c @@ -66,8 +66,8 @@ static void ns87415_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo ata_timing_compute(adev, adev->pio_mode, &t, T, 0); - clocking = 17 - FIT(t.active, 2, 17); - clocking |= (16 - FIT(t.recover, 1, 16)) << 4; + clocking = 17 - clamp_val(t.active, 2, 17); + clocking |= (16 - clamp_val(t.recover, 1, 16)) << 4; /* Use the same timing for read and write bytes */ clocking |= (clocking << 8); pci_write_config_word(dev, timing, clocking); diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index bf45cf0..97e5b09 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -60,11 +60,11 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); if (qdi->fast) { - active = 8 - FIT(t.active, 1, 8); - recovery = 18 - FIT(t.recover, 3, 18); + active = 8 - clamp_val(t.active, 1, 8); + recovery = 18 - clamp_val(t.recover, 3, 18); } else { - active = 9 - FIT(t.active, 2, 9); - recovery = 15 - FIT(t.recover, 0, 15); + active = 9 - clamp_val(t.active, 2, 9); + recovery = 15 - clamp_val(t.recover, 0, 15); } timing = (recovery << 4) | active | 0x08; @@ -84,11 +84,11 @@ static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); if (qdi->fast) { - active = 8 - FIT(t.active, 1, 8); - recovery = 18 - FIT(t.recover, 3, 18); + active = 8 - clamp_val(t.active, 1, 8); + recovery = 18 - clamp_val(t.recover, 3, 18); } else { - active = 9 - FIT(t.active, 2, 9); - recovery = 15 - FIT(t.recover, 0, 15); + active = 9 - clamp_val(t.active, 2, 9); + recovery = 15 - clamp_val(t.recover, 0, 15); } timing = (recovery << 4) | active | 0x08; diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 2fea6cb..708ed14 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -259,15 +259,15 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo pci_read_config_byte(pdev, 0x4C, &setup); setup &= ~(3 << shift); - setup |= FIT(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */ + setup |= clamp_val(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */ pci_write_config_byte(pdev, 0x4C, setup); } /* Load the PIO mode bits */ pci_write_config_byte(pdev, 0x4F - ap->port_no, - ((FIT(t.act8b, 1, 16) - 1) << 4) | (FIT(t.rec8b, 1, 16) - 1)); + ((clamp_val(t.act8b, 1, 16) - 1) << 4) | (clamp_val(t.rec8b, 1, 16) - 1)); pci_write_config_byte(pdev, 0x48 + offset, - ((FIT(t.active, 1, 16) - 1) << 4) | (FIT(t.recover, 1, 16) - 1)); + ((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1)); /* Load the UDMA bits according to type */ switch(udma_type) { @@ -275,16 +275,16 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo /* BUG() ? */ /* fall through */ case 33: - ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 5) - 2)) : 0x03; + ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03; break; case 66: - ut = t.udma ? (0xe8 | (FIT(t.udma, 2, 9) - 2)) : 0x0f; + ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f; break; case 100: - ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07; + ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; break; case 133: - ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07; + ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; break; } diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index 6e52a35..474528f 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -75,8 +75,8 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) else ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); - active = (FIT(t.active, 3, 17) - 1) & 0x0F; - recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F; + active = (clamp_val(t.active, 3, 17) - 1) & 0x0F; + recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F; timing = (active << 4) | recovery; winbond_writecfg(winbond->config, timing, reg); @@ -87,7 +87,7 @@ static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev) reg |= 0x08; /* FIFO off */ if (!ata_pio_need_iordy(adev)) reg |= 0x02; /* IORDY off */ - reg |= (FIT(t.setup, 0, 3) << 6); + reg |= (clamp_val(t.setup, 0, 3) << 6); winbond_writecfg(winbond->config, timing + 1, reg); } diff --git a/include/linux/libata.h b/include/linux/libata.h index 0f17643..07ec193 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -821,8 +821,6 @@ struct ata_timing { unsigned short udma; /* t2CYCTYP/2 */ }; -#define FIT(v, vmin, vmax) max_t(short, min_t(short, v, vmax), vmin) - /* * Core layer - drivers/ata/libata-core.c */ |