diff options
author | Uwe Kleine-König <u.kleine-koenig@pengutronix.de> | 2010-06-11 10:17:00 (GMT) |
---|---|---|
committer | Jiri Kosina <jkosina@suse.cz> | 2010-06-16 16:05:05 (GMT) |
commit | 421f91d21ad6f799dc7b489bb33cc560ccc56f98 (patch) | |
tree | aaf9f6385233fdf9277e634603156c89ede7f770 | |
parent | 65155b3708137fabee865dc4da822763c0c41208 (diff) | |
download | linux-fsl-qoriq-421f91d21ad6f799dc7b489bb33cc560ccc56f98.tar.xz |
fix typos concerning "initiali[zs]e"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
66 files changed, 90 insertions, 90 deletions
diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c index af5e85b..f060a39 100644 --- a/arch/arm/mach-msm/acpuclock-arm11.c +++ b/arch/arm/mach-msm/acpuclock-arm11.c @@ -98,7 +98,7 @@ struct clkctl_acpu_speed { /* * ACPU speed table. Complete table is shown but certain speeds are commented - * out to optimized speed switching. Initalize loops_per_jiffy to 0. + * out to optimized speed switching. Initialize loops_per_jiffy to 0. * * Table stepping up/down is optimized for 256mhz jumps while staying on the * same PLL. @@ -494,7 +494,7 @@ uint32_t acpuclk_get_switch_time(void) * Clock driver initialization *---------------------------------------------------------------------------*/ -/* Initalize the lpj field in the acpu_freq_tbl. */ +/* Initialize the lpj field in the acpu_freq_tbl. */ static void __init lpj_init(void) { int i; diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c index 5f61fd4..d927901 100644 --- a/arch/arm/mach-u300/gpio.c +++ b/arch/arm/mach-u300/gpio.c @@ -523,7 +523,7 @@ static void gpio_set_initial_values(void) /* * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED' - * to output and 'GPIO_IN' to input for each port. And initalize + * to output and 'GPIO_IN' to input for each port. And initialize * default value on outputs. */ for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c index 8474d05..931d26d 100644 --- a/arch/arm/plat-s3c24xx/clock.c +++ b/arch/arm/plat-s3c24xx/clock.c @@ -43,7 +43,7 @@ #include <plat/cpu.h> #include <plat/pll.h> -/* initalise all the clocks */ +/* initialise all the clocks */ void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk, unsigned long hclk, diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 8bf79f3..90a2051 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -391,7 +391,7 @@ void __init s3c_disable_clocks(struct clk *clkp, int nr_clks) (clkp->enable)(clkp, 0); } -/* initalise all the clocks */ +/* initialise all the clocks */ int __init s3c24xx_register_baseclocks(unsigned long xtal) { diff --git a/arch/h8300/kernel/timer/itu.c b/arch/h8300/kernel/timer/itu.c index 4883ba7..a2ae5e9 100644 --- a/arch/h8300/kernel/timer/itu.c +++ b/arch/h8300/kernel/timer/itu.c @@ -73,7 +73,7 @@ void __init h8300_timer_setup(void) setup_irq(ITUIRQ, &itu_irq); - /* initalize timer */ + /* initialize timer */ ctrl_outb(0, TSTR); ctrl_outb(CCLR0 | div, ITUBASE + TCR); ctrl_outb(0x01, ITUBASE + TIER); diff --git a/arch/h8300/kernel/timer/timer16.c b/arch/h8300/kernel/timer/timer16.c index 042dbb5..ae0d381 100644 --- a/arch/h8300/kernel/timer/timer16.c +++ b/arch/h8300/kernel/timer/timer16.c @@ -68,7 +68,7 @@ void __init h8300_timer_setup(void) setup_irq(_16IRQ, &timer16_irq); - /* initalize timer */ + /* initialize timer */ ctrl_outb(0, TSTR); ctrl_outb(CCLR0 | div, _16BASE + TCR); ctrl_outw(cnt, _16BASE + GRA); diff --git a/arch/h8300/kernel/timer/timer8.c b/arch/h8300/kernel/timer/timer8.c index 38be0ca..3946c0f 100644 --- a/arch/h8300/kernel/timer/timer8.c +++ b/arch/h8300/kernel/timer/timer8.c @@ -94,7 +94,7 @@ void __init h8300_timer_setup(void) ctrl_bclr(0, MSTPCRL) #endif - /* initalize timer */ + /* initialize timer */ ctrl_outw(cnt, _8BASE + TCORA); ctrl_outw(0x0000, _8BASE + _8TCSR); ctrl_outw((CMIEA|CCLR_CMA|CKS2) << 8 | div, diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 7f3c0a2..29afd9a 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -1234,7 +1234,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) p_ctx->cr[2] = (unsigned long)kvm_vmm_info->vmm_ivt; p_ctx->cr[8] = 0x3c; - /*Initilize region register*/ + /*Initialize region register*/ p_ctx->rr[0] = 0x30; p_ctx->rr[1] = 0x30; p_ctx->rr[2] = 0x30; @@ -1243,7 +1243,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) p_ctx->rr[5] = 0x30; p_ctx->rr[7] = 0x30; - /*Initilize branch register 0*/ + /*Initialize branch register 0*/ p_ctx->br[0] = *(unsigned long *)kvm_vmm_info->vmm_entry; vcpu->arch.vmm_rr = kvm->arch.vmm_init_rr; @@ -1702,7 +1702,7 @@ static int kvm_relocate_vmm(struct kvm_vmm_info *vmm_info, BUG_ON(!module); if (!kvm_vmm_base) { - printk("kvm: kvm area hasn't been initilized yet!!\n"); + printk("kvm: kvm area hasn't been initialized yet!!\n"); return -EFAULT; } diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index d00dfc1..dbc4cbe 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -507,7 +507,7 @@ static void __init sn_init_pdas(char **cmdline_p) cnodeid_t cnode; /* - * Allocate & initalize the nodepda for each node. + * Allocate & initialize the nodepda for each node. */ for_each_online_node(cnode) { nodepdaindr[cnode] = diff --git a/arch/sparc/boot/btfixupprep.c b/arch/sparc/boot/btfixupprep.c index bbf91b9..b604911 100644 --- a/arch/sparc/boot/btfixupprep.c +++ b/arch/sparc/boot/btfixupprep.c @@ -216,7 +216,7 @@ main1: switch (buffer[nbase+3]) { case 'f': if (initval) { - fprintf(stderr, "Cannot use pre-initalized fixups for calls\n%s\n", buffer); + fprintf(stderr, "Cannot use pre-initialized fixups for calls\n%s\n", buffer); exit(1); } if (!strcmp (sect, "__ksymtab")) { @@ -273,7 +273,7 @@ main1: break; case 'i': if (initval) { - fprintf(stderr, "Cannot use pre-initalized fixups for INT\n%s\n", buffer); + fprintf(stderr, "Cannot use pre-initialized fixups for INT\n%s\n", buffer); exit(1); } if (strncmp (buffer + mode+9, "HI22 ", 10) && strncmp (buffer + mode+9, "LO10 ", 10)) { diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index e5a4a1e..192cd7e 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -459,7 +459,7 @@ static void lapic_timer_broadcast(const struct cpumask *mask) } /* - * Setup the local APIC timer for this CPU. Copy the initilized values + * Setup the local APIC timer for this CPU. Copy the initialized values * of the boot CPU and register the clock event in the framework. */ static void __cpuinit setup_APIC_timer(void) diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index b2e2460..784360c 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -20,7 +20,7 @@ static void __init i386_default_early_setup(void) { - /* Initilize 32bit specific setup functions */ + /* Initialize 32bit specific setup functions */ x86_init.resources.probe_roms = probe_roms; x86_init.resources.reserve_resources = i386_reserve_resources; x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc; diff --git a/drivers/crypto/amcc/crypto4xx_reg_def.h b/drivers/crypto/amcc/crypto4xx_reg_def.h index 7d4edb0..5f5fbc0 100644 --- a/drivers/crypto/amcc/crypto4xx_reg_def.h +++ b/drivers/crypto/amcc/crypto4xx_reg_def.h @@ -113,7 +113,7 @@ #define CRYPTO4XX_PRNG_LFSR_H 0x00070034 /** - * Initilize CRYPTO ENGINE registers, and memory bases. + * Initialize CRYPTO ENGINE registers, and memory bases. */ #define PPC4XX_PDR_POLL 0x3ff #define PPC4XX_OUTPUT_THRESHOLD 2 diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 278cf5b..308ab32 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -69,7 +69,7 @@ static struct at_desc *atc_first_queued(struct at_dma_chan *atchan) } /** - * atc_alloc_descriptor - allocate and return an initilized descriptor + * atc_alloc_descriptor - allocate and return an initialized descriptor * @chan: the channel to allocate descriptors for * @gfp_flags: GFP allocation flags * diff --git a/drivers/gpu/drm/savage/savage_bci.c b/drivers/gpu/drm/savage/savage_bci.c index 2d0c9ca..fa05cda 100644 --- a/drivers/gpu/drm/savage/savage_bci.c +++ b/drivers/gpu/drm/savage/savage_bci.c @@ -552,7 +552,7 @@ int savage_driver_load(struct drm_device *dev, unsigned long chipset) /* - * Initalize mappings. On Savage4 and SavageIX the alignment + * Initialize mappings. On Savage4 and SavageIX the alignment * and size of the aperture is not suitable for automatic MTRR setup * in drm_addmap. Therefore we add them manually before the maps are * initialized, and tear them down on last close. diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c index c32d839..27d9fe0 100644 --- a/drivers/ide/ide-gd.c +++ b/drivers/ide/ide-gd.c @@ -92,7 +92,7 @@ static void ide_disk_release(struct device *dev) /* * On HPA drives the capacity needs to be - * reinitilized on resume otherwise the disk + * reinitialized on resume otherwise the disk * can not be used and a hard reset is required */ static void ide_gd_resume(ide_drive_t *drive) diff --git a/drivers/infiniband/hw/ehca/hcp_if.h b/drivers/infiniband/hw/ehca/hcp_if.h index 39c1c36..a46e514 100644 --- a/drivers/infiniband/hw/ehca/hcp_if.h +++ b/drivers/infiniband/hw/ehca/hcp_if.h @@ -49,7 +49,7 @@ #include "hipz_hw.h" /* - * hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initalize + * hipz_h_alloc_resource_eq allocates EQ resources in HW and FW, initialize * resources, create the empty EQPT (ring). */ u64 hipz_h_alloc_resource_eq(const struct ipz_adapter_handle adapter_handle, diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c index 0fe27ba..c431d09 100644 --- a/drivers/input/misc/ad714x.c +++ b/drivers/input/misc/ad714x.c @@ -1118,7 +1118,7 @@ struct ad714x_chip *ad714x_probe(struct device *dev, u16 bus_type, int irq, if (error) goto err_free_mem; - /* initilize and request sw/hw resources */ + /* initialize and request sw/hw resources */ ad714x_hw_init(ad714x); mutex_init(&ad714x->mutex); diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c index a109120..78a6eb6 100644 --- a/drivers/media/video/ov511.c +++ b/drivers/media/video/ov511.c @@ -4808,7 +4808,7 @@ ov7xx0_configure(struct usb_ov511 *ov) return -1; if (init_ov_sensor(ov) >= 0) { - PDEBUG(1, "OV7xx0 sensor initalized (method 1)"); + PDEBUG(1, "OV7xx0 sensor initialized (method 1)"); } else { /* Reset the 76xx */ if (i2c_w(ov, 0x12, 0x80) < 0) diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h index 8997add..307e847 100644 --- a/drivers/media/video/zoran/zoran.h +++ b/drivers/media/video/zoran/zoran.h @@ -391,7 +391,7 @@ struct zoran { struct mutex resource_lock; /* prevent evil stuff */ - u8 initialized; /* flag if zoran has been correctly initalized */ + u8 initialized; /* flag if zoran has been correctly initialized */ int user; /* number of current users */ struct card_info card; struct tvnorm *timing; diff --git a/drivers/media/video/zoran/zr36050.c b/drivers/media/video/zoran/zr36050.c index 639dd87..e198560 100644 --- a/drivers/media/video/zoran/zr36050.c +++ b/drivers/media/video/zoran/zr36050.c @@ -236,7 +236,7 @@ zr36050_pushit (struct zr36050 *ptr, Could be variable, but until it's not needed it they are just fixed to save memory. Otherwise expand zr36050 structure with arrays, push the values to - it and initalize from there, as e.g. the linux zr36057/60 driver does it. + it and initialize from there, as e.g. the linux zr36057/60 driver does it. ========================================================================= */ static const char zr36050_dqt[0x86] = { diff --git a/drivers/media/video/zoran/zr36060.c b/drivers/media/video/zoran/zr36060.c index 008746f..5e4f57c 100644 --- a/drivers/media/video/zoran/zr36060.c +++ b/drivers/media/video/zoran/zr36060.c @@ -227,7 +227,7 @@ zr36060_pushit (struct zr36060 *ptr, Could be variable, but until it's not needed it they are just fixed to save memory. Otherwise expand zr36060 structure with arrays, push the values to - it and initalize from there, as e.g. the linux zr36057/60 driver does it. + it and initialize from there, as e.g. the linux zr36057/60 driver does it. ========================================================================= */ static const char zr36060_dqt[0x86] = { diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index a6a5701..14d162f 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -1794,7 +1794,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->sh = NULL; ioc->cached_fw = NULL; - /* Initilize SCSI Config Data structure + /* Initialize SCSI Config Data structure */ memset(&ioc->spi_data, 0, sizeof(SpiCfgData)); @@ -2471,7 +2471,7 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) { /* - * Initalize link list for inactive raid volumes. + * Initialize link list for inactive raid volumes. */ mutex_init(&ioc->raid_data.inactive_list_mutex); INIT_LIST_HEAD(&ioc->raid_data.inactive_list); diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index ca03428..3dfda9c 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1836,7 +1836,7 @@ static struct nand_bbt_descr bbt_mirror_descr = { .pattern = mirror_pattern, }; -/* initalize driver data structures */ +/* initialize driver data structures */ void denali_drv_init(struct denali_nand_info *denali) { denali->idx = 0; diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c index 38395df..70705d1 100644 --- a/drivers/net/3c527.c +++ b/drivers/net/3c527.c @@ -729,14 +729,14 @@ static void mc32_halt_transceiver(struct net_device *dev) * mc32_load_rx_ring - load the ring of receive buffers * @dev: 3c527 to build the ring for * - * This initalises the on-card and driver datastructures to + * This initialises the on-card and driver datastructures to * the point where mc32_start_transceiver() can be called. * * The card sets up the receive ring for us. We are required to use the * ring it provides, although the size of the ring is configurable. * * We allocate an sk_buff for each ring entry in turn and - * initalise its house-keeping info. At the same time, we read + * initialise its house-keeping info. At the same time, we read * each 'next' pointer in our rx_ring array. This reduces slow * shared-memory reads and makes it easy to access predecessor * descriptors. diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c index 79636ee..0362c8d 100644 --- a/drivers/net/appletalk/ipddp.c +++ b/drivers/net/appletalk/ipddp.c @@ -80,7 +80,7 @@ static struct net_device * __init ipddp_init(void) if (version_printed++ == 0) printk(version); - /* Initalize the device structure. */ + /* Initialize the device structure. */ dev->netdev_ops = &ipddp_netdev_ops; dev->type = ARPHRD_IPDDP; /* IP over DDP tunnel */ diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index 68e5ac8..dfc787f 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -1071,7 +1071,7 @@ static void hp100_mmuinit(struct net_device *dev) if (lp->mode == 1) hp100_init_pdls(dev); - /* Go to performance page and initalize isr and imr registers */ + /* Go to performance page and initialize isr and imr registers */ hp100_page(PERFORMANCE); hp100_outw(0xfefe, IRQ_MASK); /* mask off all ints */ hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */ diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index 2484e9e..6a45f8f 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -1044,7 +1044,7 @@ static int emac_change_mtu(struct net_device *ndev, int new_mtu) DBG(dev, "change_mtu(%d)" NL, new_mtu); if (netif_running(ndev)) { - /* Check if we really need to reinitalize RX ring */ + /* Check if we really need to reinitialize RX ring */ if (emac_rx_skb_size(ndev->mtu) != emac_rx_skb_size(new_mtu)) ret = emac_resize_rx_ring(dev, new_mtu); } diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c index c80ca64..c02ce1a 100644 --- a/drivers/net/ksz884x.c +++ b/drivers/net/ksz884x.c @@ -6812,7 +6812,7 @@ static int stp; static int fast_aging; /** - * netdev_init - initalize network device. + * netdev_init - initialize network device. * @dev: Network device. * * This function initializes the network device. diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c index b59b24d..0ace2a4 100644 --- a/drivers/net/ll_temac_main.c +++ b/drivers/net/ll_temac_main.c @@ -449,7 +449,7 @@ static u32 temac_setoptions(struct net_device *ndev, u32 options) return (0); } -/* Initilize temac */ +/* Initialize temac */ static void temac_device_reset(struct net_device *ndev) { struct temac_local *lp = netdev_priv(ndev); diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c index 29e6c63..0bc4f30 100644 --- a/drivers/net/tulip/dmfe.c +++ b/drivers/net/tulip/dmfe.c @@ -589,7 +589,7 @@ static int dmfe_open(struct DEVICE *dev) db->dm910x_chk_mode = 1; /* Enter the check mode */ } - /* Initilize DM910X board */ + /* Initialize DM910X board */ dmfe_init_dm910x(dev); /* Active System Interface */ @@ -606,9 +606,9 @@ static int dmfe_open(struct DEVICE *dev) } -/* Initilize DM910X board +/* Initialize DM910X board * Reset DM910X board - * Initilize TX/Rx descriptor chain structure + * Initialize TX/Rx descriptor chain structure * Send the set-up frame * Enable Tx/Rx machine */ @@ -649,7 +649,7 @@ static void dmfe_init_dm910x(struct DEVICE *dev) if ( !(db->media_mode & DMFE_AUTO) ) db->op_mode = db->media_mode; /* Force Mode */ - /* Initiliaze Transmit/Receive decriptor and CR3/4 */ + /* Initialize Transmit/Receive decriptor and CR3/4 */ dmfe_descriptor_init(db, ioaddr); /* Init CR6 to program DM910x operation */ @@ -1288,7 +1288,7 @@ static void dmfe_timer(unsigned long data) * Stop DM910X board * Free Tx/Rx allocated memory * Reset DM910X board - * Re-initilize DM910X board + * Re-initialize DM910X board */ static void dmfe_dynamic_reset(struct DEVICE *dev) @@ -1316,7 +1316,7 @@ static void dmfe_dynamic_reset(struct DEVICE *dev) netif_carrier_off(dev); db->wait_reset = 0; - /* Re-initilize DM910X board */ + /* Re-initialize DM910X board */ dmfe_init_dm910x(dev); /* Restart upper layer interface */ @@ -1447,7 +1447,7 @@ static void update_cr6(u32 cr6_data, unsigned long ioaddr) /* * Send a setup frame for DM9132 - * This setup frame initilize DM910X address filter mode + * This setup frame initialize DM910X address filter mode */ static void dm9132_id_table(struct DEVICE *dev) @@ -1489,7 +1489,7 @@ static void dm9132_id_table(struct DEVICE *dev) /* * Send a setup frame for DM9102/DM9102A - * This setup frame initilize DM910X address filter mode + * This setup frame initialize DM910X address filter mode */ static void send_filter_frame(struct DEVICE *dev) @@ -2142,7 +2142,7 @@ static int dmfe_resume(struct pci_dev *pci_dev) pci_set_power_state(pci_dev, PCI_D0); pci_restore_state(pci_dev); - /* Re-initilize DM910X board */ + /* Re-initialize DM910X board */ dmfe_init_dm910x(dev); /* Disable WOL */ @@ -2196,7 +2196,7 @@ MODULE_PARM_DESC(SF_mode, "Davicom DM9xxx special function " /* Description: * when user used insmod to add module, system invoked init_module() - * to initilize and register. + * to initialize and register. */ static int __init dmfe_init_module(void) diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c index d86e8f3..7f48e04 100644 --- a/drivers/net/wimax/i2400m/control.c +++ b/drivers/net/wimax/i2400m/control.c @@ -50,7 +50,7 @@ * * ROADMAP * - * i2400m_dev_initalize() Called by i2400m_dev_start() + * i2400m_dev_initialize() Called by i2400m_dev_start() * i2400m_set_init_config() * i2400m_cmd_get_state() * i2400m_dev_shutdown() Called by i2400m_dev_stop() diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c index f511e70..75a80e4 100644 --- a/drivers/parisc/ccio-dma.c +++ b/drivers/parisc/ccio-dma.c @@ -1241,10 +1241,10 @@ static struct parisc_driver ccio_driver = { }; /** - * ccio_ioc_init - Initalize the I/O Controller + * ccio_ioc_init - Initialize the I/O Controller * @ioc: The I/O Controller. * - * Initalize the I/O Controller which includes setting up the + * Initialize the I/O Controller which includes setting up the * I/O Page Directory, the resource map, and initalizing the * U2/Uturn chip into virtual mode. */ diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c index fa28d89..0c62fe3 100644 --- a/drivers/pcmcia/sa11xx_base.c +++ b/drivers/pcmcia/sa11xx_base.c @@ -231,7 +231,7 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, sinfo->nskt = nr; - /* Initiliaze processor specific parameters */ + /* Initialize processor specific parameters */ for (i = 0; i < nr; i++) { skt = &sinfo->skt[i]; diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 7f87979..0ec3da6 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -9717,7 +9717,7 @@ static ushort __devinit AscInitAscDvcVar(ASC_DVC_VAR *asc_dvc) asc_dvc->bug_fix_cntl = 0; asc_dvc->pci_fix_asyn_xfer = 0; asc_dvc->pci_fix_asyn_xfer_always = 0; - /* asc_dvc->init_state initalized in AscInitGetConfig(). */ + /* asc_dvc->init_state initialized in AscInitGetConfig(). */ asc_dvc->sdtr_done = 0; asc_dvc->cur_total_qng = 0; asc_dvc->is_in_int = 0; diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c index d01dcc6..7437461 100644 --- a/drivers/scsi/aic94xx/aic94xx_seq.c +++ b/drivers/scsi/aic94xx/aic94xx_seq.c @@ -588,7 +588,7 @@ static void asd_init_cseq_mdp(struct asd_ha_struct *asd_ha) * asd_init_cseq_scratch -- setup and init CSEQ * @asd_ha: pointer to host adapter structure * - * Setup and initialize Central sequencers. Initialiaze the mode + * Setup and initialize Central sequencers. Initialize the mode * independent and dependent scratch page to the default settings. */ static void asd_init_cseq_scratch(struct asd_ha_struct *asd_ha) @@ -782,7 +782,7 @@ static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq) asd_write_reg_word(asd_ha, LmSEQ_OOB_INT_ENABLES(lseq), 0); /* * Set the desired interval between transmissions of the NOTIFY - * (ENABLE SPINUP) primitive. Must be initilized to val - 1. + * (ENABLE SPINUP) primitive. Must be initialized to val - 1. */ asd_write_reg_word(asd_ha, LmSEQ_NOTIFY_TIMER_TIMEOUT(lseq), ASD_NOTIFY_TIMEOUT - 1); diff --git a/drivers/scsi/bfa/vport.c b/drivers/scsi/bfa/vport.c index 27cd619..e2720c8 100644 --- a/drivers/scsi/bfa/vport.c +++ b/drivers/scsi/bfa/vport.c @@ -789,7 +789,7 @@ bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status) switch (status) { case BFA_STATUS_OK: /* - * Initialiaze the V-Port fields + * Initialize the V-Port fields */ __vport_fcid(vport) = bfa_lps_get_pid(vport->lps); vport->vport_stats.fdisc_accepts++; diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 0e05e8a..e81efac 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -1082,7 +1082,7 @@ static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha) } /** - * pm8001_chip_iounmap - which maped when initilized. + * pm8001_chip_iounmap - which maped when initialized. * @pm8001_ha: our hba card information */ static void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha) diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 5510df8..cd30432 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -183,7 +183,7 @@ static int qla4xxx_validate_mac_address(struct scsi_qla_host *ha) **/ static int qla4xxx_init_local_data(struct scsi_qla_host *ha) { - /* Initilize aen queue */ + /* Initialize aen queue */ ha->aen_q_count = MAX_AEN_ENTRIES; return qla4xxx_get_firmware_status(ha); diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c index 9794e0c..7e5e5ef 100644 --- a/drivers/serial/sn_console.c +++ b/drivers/serial/sn_console.c @@ -470,7 +470,7 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags) } if (port->sc_port.state) { - /* The serial_core stuffs are initilized, use them */ + /* The serial_core stuffs are initialized, use them */ tty = port->sc_port.state->port.tty; } else { @@ -551,11 +551,11 @@ static void sn_transmit_chars(struct sn_cons_port *port, int raw) BUG_ON(!port->sc_is_asynch); if (port->sc_port.state) { - /* We're initilized, using serial core infrastructure */ + /* We're initialized, using serial core infrastructure */ xmit = &port->sc_port.state->xmit; } else { /* Probably sn_sal_switch_to_asynch has been run but serial core isn't - * initilized yet. Just return. Writes are going through + * initialized yet. Just return. Writes are going through * sn_sal_console_write (due to register_console) at this time. */ return; diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index 8942ae4..e727168 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -2087,7 +2087,7 @@ static int usbdux_pwm_start(struct comedi_device *dev, if (ret < 0) return ret; - /* initalise the buffer */ + /* initialise the buffer */ for (i = 0; i < this_usbduxsub->sizePwmBuf; i++) ((char *)(this_usbduxsub->urbPwm->transfer_buffer))[i] = 0; diff --git a/drivers/staging/octeon/cvmx-cmd-queue.c b/drivers/staging/octeon/cvmx-cmd-queue.c index 976227b..e9809d3 100644 --- a/drivers/staging/octeon/cvmx-cmd-queue.c +++ b/drivers/staging/octeon/cvmx-cmd-queue.c @@ -140,21 +140,21 @@ cvmx_cmd_queue_result_t cvmx_cmd_queue_initialize(cvmx_cmd_queue_id_t queue_id, if (qstate->base_ptr_div128) { if (max_depth != (int)qstate->max_depth) { cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: " - "Queue already initalized with different " + "Queue already initialized with different " "max_depth (%d).\n", (int)qstate->max_depth); return CVMX_CMD_QUEUE_INVALID_PARAM; } if (fpa_pool != qstate->fpa_pool) { cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: " - "Queue already initalized with different " + "Queue already initialized with different " "FPA pool (%u).\n", qstate->fpa_pool); return CVMX_CMD_QUEUE_INVALID_PARAM; } if ((pool_size >> 3) - 1 != qstate->pool_size_m1) { cvmx_dprintf("ERROR: cvmx_cmd_queue_initialize: " - "Queue already initalized with different " + "Queue already initialized with different " "FPA pool size (%u).\n", (qstate->pool_size_m1 + 1) << 3); return CVMX_CMD_QUEUE_INVALID_PARAM; diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c index 6327552..fe8b093 100644 --- a/drivers/staging/pohmelfs/inode.c +++ b/drivers/staging/pohmelfs/inode.c @@ -848,7 +848,7 @@ static void pohmelfs_destroy_inode(struct inode *inode) } /* - * ->alloc_inode() callback. Allocates inode and initilizes private data. + * ->alloc_inode() callback. Allocates inode and initializes private data. */ static struct inode *pohmelfs_alloc_inode(struct super_block *sb) { diff --git a/drivers/staging/rt2860/common/cmm_wpa.c b/drivers/staging/rt2860/common/cmm_wpa.c index 94e119f..e1ead76 100644 --- a/drivers/staging/rt2860/common/cmm_wpa.c +++ b/drivers/staging/rt2860/common/cmm_wpa.c @@ -427,7 +427,7 @@ void RTMPToWirelessSta(struct rt_rtmp_adapter *pAd, /* ========================================================================== Description: - This is a function to initilize 4-way handshake + This is a function to initialize 4-way handshake Return: @@ -867,7 +867,7 @@ void PeerPairMsg3Action(struct rt_rtmp_adapter *pAd, ========================================================================== Description: When receiving the last packet of 4-way pairwisekey handshake. - Initilize 2-way groupkey handshake following. + Initialize 2-way groupkey handshake following. Return: ========================================================================== */ diff --git a/drivers/staging/rtl8192e/r8190_rtl8256.c b/drivers/staging/rtl8192e/r8190_rtl8256.c index 1bd054d..eff47f9 100644 --- a/drivers/staging/rtl8192e/r8190_rtl8256.c +++ b/drivers/staging/rtl8192e/r8190_rtl8256.c @@ -501,13 +501,13 @@ SetRFPowerState8190( if((priv->ieee80211->eRFPowerState == eRfOff) && RT_IN_PS_LEVEL(pPSC, RT_RF_OFF_LEVL_HALT_NIC)) { // The current RF state is OFF and the RF OFF level is halting the NIC, re-initialize the NIC. bool rtstatus = true; - u32 InitilizeCount = 3; + u32 InitializeCount = 3; do { - InitilizeCount--; + InitializeCount--; priv->RegRfOff = false; rtstatus = NicIFEnableNIC(dev); - }while( (rtstatus != true) &&(InitilizeCount >0) ); + }while( (rtstatus != true) &&(InitializeCount >0) ); if(rtstatus != true) { diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index cdbe8bf..e8a65ce 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -261,7 +261,7 @@ static int klsi_105_startup(struct usb_serial *serial) spin_lock_init(&priv->lock); - /* priv->termios is left uninitalized until port opening */ + /* priv->termios is left uninitialized until port opening */ init_waitqueue_head(&serial->port[i]->write_wait); } diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c index eab86e4..2054d4e 100644 --- a/drivers/usb/wusbcore/wusbhc.c +++ b/drivers/usb/wusbcore/wusbhc.c @@ -26,7 +26,7 @@ * the one that requires (phase B, wusbhc_b_{create,destroy}). * * This is so because usb_add_hcd() will start the HC, and thus, all - * the HC specific stuff has to be already initialiazed (like sysfs + * the HC specific stuff has to be already initialized (like sysfs * thingies). */ #include <linux/device.h> diff --git a/drivers/uwb/wlp/wss-lc.c b/drivers/uwb/wlp/wss-lc.c index 90accdd..a005d2a 100644 --- a/drivers/uwb/wlp/wss-lc.c +++ b/drivers/uwb/wlp/wss-lc.c @@ -180,7 +180,7 @@ error_kobject_register: * If memory was allocated for the kobject's name then it will * be freed by the kobject system during this time. * - * The EDA cache is removed and reinitilized when the WSS is removed. We + * The EDA cache is removed and reinitialized when the WSS is removed. We * thus loose knowledge of members of this WSS at that time and need not do * it here. */ diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c index d8345fc..6b19136 100644 --- a/drivers/video/carminefb.c +++ b/drivers/video/carminefb.c @@ -432,7 +432,7 @@ static int init_hardware(struct carmine_hw *hw) u32 loops; u32 ret; - /* Initalize Carmine */ + /* Initialize Carmine */ /* Sets internal clock */ c_set_hw_reg(hw, CARMINE_CTL_REG + CARMINE_CTL_REG_CLOCK_ENABLE, CARMINE_DFLT_IP_CLOCK_ENABLE); diff --git a/drivers/video/tgafb.c b/drivers/video/tgafb.c index 1b3b1c7..aba7686 100644 --- a/drivers/video/tgafb.c +++ b/drivers/video/tgafb.c @@ -305,7 +305,7 @@ tgafb_set_par(struct fb_info *info) TGA_WRITE_REG(par, htimings, TGA_HORIZ_REG); TGA_WRITE_REG(par, vtimings, TGA_VERT_REG); - /* Initalise RAMDAC. */ + /* Initialise RAMDAC. */ if (tga_type == TGA_TYPE_8PLANE && tga_bus_pci) { /* Init BT485 RAMDAC registers. */ diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c index 34ddda8..dc39d28 100644 --- a/fs/befs/linuxvfs.c +++ b/fs/befs/linuxvfs.c @@ -436,7 +436,7 @@ befs_init_inodecache(void) init_once); if (befs_inode_cachep == NULL) { printk(KERN_ERR "befs_init_inodecache: " - "Couldn't initalize inode slabcache\n"); + "Couldn't initialize inode slabcache\n"); return -ENOMEM; } diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index 1cc0876..a2e3b56 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -762,7 +762,7 @@ ecryptfs_decrypt_page_offset(struct ecryptfs_crypt_stat *crypt_stat, /** * ecryptfs_init_crypt_ctx - * @crypt_stat: Uninitilized crypt stats structure + * @crypt_stat: Uninitialized crypt stats structure * * Initialize the crypto context. * diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 236b834..146f1f6 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2918,7 +2918,7 @@ fix_extent_len: * One of more index blocks maybe needed if the extent tree grow after * the unintialized extent split. To prevent ENOSPC occur at the IO * complete, we need to split the uninitialized extent before DIO submit - * the IO. The uninitilized extent called at this time will be split + * the IO. The uninitialized extent called at this time will be split * into three uninitialized extent(at most). After IO complete, the part * being filled will be convert to initialized by the end_io callback function * via ext4_convert_unwritten_extents(). diff --git a/fs/ext4/super.c b/fs/ext4/super.c index e14d22c..8d7539c 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3008,7 +3008,7 @@ no_journal: ext4_ext_init(sb); err = ext4_mb_init(sb, needs_recovery); if (err) { - ext4_msg(sb, KERN_ERR, "failed to initalize mballoc (%d)", + ext4_msg(sb, KERN_ERR, "failed to initialize mballoc (%d)", err); goto failed_mount4; } diff --git a/fs/freevxfs/vxfs_super.c b/fs/freevxfs/vxfs_super.c index 1e8af93..5132c99 100644 --- a/fs/freevxfs/vxfs_super.c +++ b/fs/freevxfs/vxfs_super.c @@ -135,7 +135,7 @@ static int vxfs_remount(struct super_block *sb, int *flags, char *data) } /** - * vxfs_read_super - read superblock into memory and initalize filesystem + * vxfs_read_super - read superblock into memory and initialize filesystem * @sbp: VFS superblock (to fill) * @dp: fs private mount data * @silent: do not complain loudly when sth is wrong diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 2c26ce2..812f102 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -2476,7 +2476,7 @@ static void ocfs2_delete_osb(struct ocfs2_super *osb) kfree(osb->slot_recovery_generations); /* FIXME * This belongs in journal shutdown, but because we have to - * allocate osb->journal at the start of ocfs2_initalize_osb(), + * allocate osb->journal at the start of ocfs2_initialize_osb(), * we free it here. */ kfree(osb->journal); diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index 0f22fda..29db72203 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -1221,7 +1221,7 @@ static void init_inode(struct inode *inode, struct treepath *path) inode_set_bytes(inode, to_real_used_space(inode, inode->i_blocks, SD_V2_SIZE)); - /* read persistent inode attributes from sd and initalise + /* read persistent inode attributes from sd and initialise generic inode flags from them */ REISERFS_I(inode)->i_attrs = sd_v2_attrs(sd); sd_attrs_to_i_attrs(sd_v2_attrs(sd), inode); diff --git a/lib/random32.c b/lib/random32.c index 217d5c4..556d5ff 100644 --- a/lib/random32.c +++ b/lib/random32.c @@ -131,7 +131,7 @@ core_initcall(random32_init); /* * Generate better values after random number generator - * is fully initalized. + * is fully initialized. */ static int __init random32_reseed(void) { diff --git a/net/netfilter/ipvs/ip_vs_lblc.c b/net/netfilter/ipvs/ip_vs_lblc.c index 94a4521..9323f89 100644 --- a/net/netfilter/ipvs/ip_vs_lblc.c +++ b/net/netfilter/ipvs/ip_vs_lblc.c @@ -11,7 +11,7 @@ * Changes: * Martin Hamilton : fixed the terrible locking bugs * *lock(tbl->lock) ==> *lock(&tbl->lock) - * Wensong Zhang : fixed the uninitilized tbl->lock bug + * Wensong Zhang : fixed the uninitialized tbl->lock bug * Wensong Zhang : added doing full expiration check to * collect stale entries of 24+ hours when * no partial expire check in a half hour diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c index 535dc2b..dbeed8e 100644 --- a/net/netfilter/ipvs/ip_vs_lblcr.c +++ b/net/netfilter/ipvs/ip_vs_lblcr.c @@ -386,7 +386,7 @@ ip_vs_lblcr_new(struct ip_vs_lblcr_table *tbl, const union nf_inet_addr *daddr, ip_vs_addr_copy(dest->af, &en->addr, daddr); en->lastuse = jiffies; - /* initilize its dest set */ + /* initialize its dest set */ atomic_set(&(en->set.size), 0); INIT_LIST_HEAD(&en->set.list); rwlock_init(&en->set.lock); diff --git a/net/sctp/associola.c b/net/sctp/associola.c index e41feff..0b85e52 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -172,7 +172,7 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE] = (unsigned long)sp->autoclose * HZ; - /* Initilizes the timers */ + /* Initializes the timers */ for (i = SCTP_EVENT_TIMEOUT_NONE; i < SCTP_NUM_TIMEOUT_TYPES; ++i) setup_timer(&asoc->timers[i], sctp_timer_events[i], (unsigned long)asoc); diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 1827498..0f41b05 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -1162,7 +1162,7 @@ SCTP_STATIC __init int sctp_init(void) /* Set the pressure threshold to be a fraction of global memory that * is up to 1/2 at 256 MB, decreasing toward zero with the amount of * memory, with a floor of 128 pages. - * Note this initalizes the data in sctpv6_prot too + * Note this initializes the data in sctpv6_prot too * Unabashedly stolen from tcp_init */ nr_pages = totalram_pages - totalhigh_pages; diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index 0f2fc48..276bdc7 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -3227,7 +3227,7 @@ static __init int smack_init(void) cred = (struct cred *) current->cred; cred->security = &smack_known_floor.smk_known; - /* initilize the smack_know_list */ + /* initialize the smack_know_list */ init_smack_know_list(); /* * Initialize locks diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c index 6d943f6..2870a4f 100644 --- a/sound/pci/trident/trident_main.c +++ b/sound/pci/trident/trident_main.c @@ -1055,7 +1055,7 @@ static int snd_trident_capture_prepare(struct snd_pcm_substream *substream) spin_lock_irq(&trident->reg_lock); - // Initilize the channel and set channel Mode + // Initialize the channel and set channel Mode outb(0, TRID_REG(trident, LEGACY_DMAR15)); // Set DMA channel operation mode register diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c index 83de1c8..604a91f 100644 --- a/sound/soc/fsl/mpc8610_hpcd.c +++ b/sound/soc/fsl/mpc8610_hpcd.c @@ -46,7 +46,7 @@ struct mpc8610_hpcd_data { }; /** - * mpc8610_hpcd_machine_probe: initalize the board + * mpc8610_hpcd_machine_probe: initialize the board * * This function is called when platform_device_add() is called. It is used * to initialize the board-specific hardware. diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 998569d..e048e09 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1307,7 +1307,7 @@ cpu_dai_err: } /* - * Attempt to initialise any uninitalised cards. Must be called with + * Attempt to initialise any uninitialised cards. Must be called with * client_mutex. */ static void snd_soc_instantiate_cards(void) |