diff options
author | Paul Zimmerman <Paul.Zimmerman@synopsys.com> | 2013-03-12 00:47:58 (GMT) |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2013-03-12 01:16:36 (GMT) |
commit | 56f5b1cff22a1d6eeb3f7fc6981b8a55af43332b (patch) | |
tree | a745653349bb15e732a02c90e28f1c179fe7dc81 | |
parent | 6f98b1a250cb6055ab5dde41a181b2c9cf026bc9 (diff) | |
download | linux-fsl-qoriq-56f5b1cff22a1d6eeb3f7fc6981b8a55af43332b.tar.xz |
staging: Core files for the DWC2 driver
The core code provides basic services for accessing and managing
the DWC_otg hardware. These services are used by both the Host
Controller Driver and (in future) the Peripheral Controller Driver.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r-- | drivers/staging/dwc2/core.c | 2678 | ||||
-rw-r--r-- | drivers/staging/dwc2/core.h | 658 | ||||
-rw-r--r-- | drivers/staging/dwc2/core_intr.c | 505 | ||||
-rw-r--r-- | drivers/staging/dwc2/hw.h | 811 |
4 files changed, 4652 insertions, 0 deletions
diff --git a/drivers/staging/dwc2/core.c b/drivers/staging/dwc2/core.c new file mode 100644 index 0000000..f695a9b0 --- /dev/null +++ b/drivers/staging/dwc2/core.c @@ -0,0 +1,2678 @@ +/* + * core.c - DesignWare HS OTG Controller common routines + * + * Copyright (C) 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * The Core code provides basic services for accessing and managing the + * DWC_otg hardware. These services are used by both the Host Controller + * Driver and the Peripheral Controller Driver. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> + +#include "core.h" +#include "hcd.h" + +/** + * dwc2_enable_common_interrupts() - Initializes the commmon interrupts, + * used in both device and host modes + * + * @hsotg: Programming view of the DWC_otg controller + */ +static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg) +{ + u32 intmsk; + + /* Clear any pending OTG Interrupts */ + writel(0xffffffff, hsotg->regs + GOTGINT); + + /* Clear any pending interrupts */ + writel(0xffffffff, hsotg->regs + GINTSTS); + + /* Enable the interrupts in the GINTMSK */ + intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT; + + if (hsotg->core_params->dma_enable <= 0) + intmsk |= GINTSTS_RXFLVL; + + intmsk |= GINTSTS_CONIDSTSCHNG | GINTSTS_WKUPINT | GINTSTS_USBSUSP | + GINTSTS_SESSREQINT; + + writel(intmsk, hsotg->regs + GINTMSK); +} + +/* + * Initializes the FSLSPClkSel field of the HCFG register depending on the + * PHY type + */ +static void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg) +{ + u32 hs_phy_type = hsotg->hwcfg2 & GHWCFG2_HS_PHY_TYPE_MASK; + u32 fs_phy_type = hsotg->hwcfg2 & GHWCFG2_FS_PHY_TYPE_MASK; + u32 hcfg, val; + + if ((hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI && + fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED && + hsotg->core_params->ulpi_fs_ls > 0) || + hsotg->core_params->phy_type == DWC2_PHY_TYPE_PARAM_FS) { + /* Full speed PHY */ + val = HCFG_FSLSPCLKSEL_48_MHZ; + } else { + /* High speed PHY running at full speed or high speed */ + val = HCFG_FSLSPCLKSEL_30_60_MHZ; + } + + dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val); + hcfg = readl(hsotg->regs + HCFG); + hcfg &= ~HCFG_FSLSPCLKSEL_MASK; + hcfg |= val; + writel(hcfg, hsotg->regs + HCFG); +} + +/* + * Do core a soft reset of the core. Be careful with this because it + * resets all the internal state machines of the core. + */ +static void dwc2_core_reset(struct dwc2_hsotg *hsotg) +{ + u32 greset; + int count = 0; + + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + /* Wait for AHB master IDLE state */ + do { + usleep_range(20000, 40000); + greset = readl(hsotg->regs + GRSTCTL); + if (++count > 50) { + dev_warn(hsotg->dev, + "%s() HANG! AHB Idle GRSTCTL=%0x\n", + __func__, greset); + return; + } + } while (!(greset & GRSTCTL_AHBIDLE)); + + /* Core Soft Reset */ + count = 0; + greset |= GRSTCTL_CSFTRST; + writel(greset, hsotg->regs + GRSTCTL); + do { + usleep_range(20000, 40000); + greset = readl(hsotg->regs + GRSTCTL); + if (++count > 50) { + dev_warn(hsotg->dev, + "%s() HANG! Soft Reset GRSTCTL=%0x\n", + __func__, greset); + break; + } + } while (greset & GRSTCTL_CSFTRST); + + /* + * NOTE: This long sleep is _very_ important, otherwise the core will + * not stay in host mode after a connector ID change! + */ + usleep_range(150000, 200000); +} + +static void dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) +{ + u32 usbcfg, i2cctl; + + /* + * core_init() is now called on every switch so only call the + * following for the first time through + */ + if (select_phy) { + dev_dbg(hsotg->dev, "FS PHY selected\n"); + usbcfg = readl(hsotg->regs + GUSBCFG); + usbcfg |= GUSBCFG_PHYSEL; + writel(usbcfg, hsotg->regs + GUSBCFG); + + /* Reset after a PHY select */ + dwc2_core_reset(hsotg); + } + + /* + * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also + * do this on HNP Dev/Host mode switches (done in dev_init and + * host_init). + */ + if (dwc2_is_host_mode(hsotg)) + dwc2_init_fs_ls_pclk_sel(hsotg); + + if (hsotg->core_params->i2c_enable > 0) { + dev_dbg(hsotg->dev, "FS PHY enabling I2C\n"); + + /* Program GUSBCFG.OtgUtmiFsSel to I2C */ + usbcfg = readl(hsotg->regs + GUSBCFG); + usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL; + writel(usbcfg, hsotg->regs + GUSBCFG); + + /* Program GI2CCTL.I2CEn */ + i2cctl = readl(hsotg->regs + GI2CCTL); + i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK; + i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT; + i2cctl &= ~GI2CCTL_I2CEN; + writel(i2cctl, hsotg->regs + GI2CCTL); + i2cctl |= GI2CCTL_I2CEN; + writel(i2cctl, hsotg->regs + GI2CCTL); + } +} + +static void dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) +{ + u32 usbcfg; + + if (!select_phy) + return; + + usbcfg = readl(hsotg->regs + GUSBCFG); + + /* + * HS PHY parameters. These parameters are preserved during soft reset + * so only program the first time. Do a soft reset immediately after + * setting phyif. + */ + switch (hsotg->core_params->phy_type) { + case DWC2_PHY_TYPE_PARAM_ULPI: + /* ULPI interface */ + dev_dbg(hsotg->dev, "HS ULPI PHY selected\n"); + usbcfg |= GUSBCFG_ULPI_UTMI_SEL; + usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL); + if (hsotg->core_params->phy_ulpi_ddr > 0) + usbcfg |= GUSBCFG_DDRSEL; + break; + case DWC2_PHY_TYPE_PARAM_UTMI: + /* UTMI+ interface */ + dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n"); + usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16); + if (hsotg->core_params->phy_utmi_width == 16) + usbcfg |= GUSBCFG_PHYIF16; + break; + default: + dev_err(hsotg->dev, "FS PHY selected at HS!\n"); + break; + } + + writel(usbcfg, hsotg->regs + GUSBCFG); + + /* Reset after setting the PHY parameters */ + dwc2_core_reset(hsotg); +} + +static void dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) +{ + u32 usbcfg, hs_phy_type, fs_phy_type; + + if (hsotg->core_params->speed == DWC2_SPEED_PARAM_FULL && + hsotg->core_params->phy_type == DWC2_PHY_TYPE_PARAM_FS) { + /* If FS mode with FS PHY */ + dwc2_fs_phy_init(hsotg, select_phy); + } else { + /* High speed PHY */ + dwc2_hs_phy_init(hsotg, select_phy); + } + + hs_phy_type = hsotg->hwcfg2 & GHWCFG2_HS_PHY_TYPE_MASK; + fs_phy_type = hsotg->hwcfg2 & GHWCFG2_FS_PHY_TYPE_MASK; + + if (hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI && + fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED && + hsotg->core_params->ulpi_fs_ls > 0) { + dev_dbg(hsotg->dev, "Setting ULPI FSLS\n"); + usbcfg = readl(hsotg->regs + GUSBCFG); + usbcfg |= GUSBCFG_ULPI_FS_LS; + usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M; + writel(usbcfg, hsotg->regs + GUSBCFG); + } else { + usbcfg = readl(hsotg->regs + GUSBCFG); + usbcfg &= ~GUSBCFG_ULPI_FS_LS; + usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M; + writel(usbcfg, hsotg->regs + GUSBCFG); + } +} + +static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg) +{ + u32 ahbcfg = 0; + + switch (hsotg->hwcfg2 & GHWCFG2_ARCHITECTURE_MASK) { + case GHWCFG2_EXT_DMA_ARCH: + dev_err(hsotg->dev, "External DMA Mode not supported\n"); + return -EINVAL; + + case GHWCFG2_INT_DMA_ARCH: + dev_dbg(hsotg->dev, "Internal DMA Mode\n"); + /* + * Old value was GAHBCFG_HBSTLEN_INCR - done for + * Host mode ISOC in issue fix - vahrama + */ + ahbcfg |= GAHBCFG_HBSTLEN_INCR4; + break; + + case GHWCFG2_SLAVE_ONLY_ARCH: + default: + dev_dbg(hsotg->dev, "Slave Only Mode\n"); + break; + } + + dev_dbg(hsotg->dev, "dma_enable:%d dma_desc_enable:%d\n", + hsotg->core_params->dma_enable, + hsotg->core_params->dma_desc_enable); + + if (hsotg->core_params->dma_enable > 0) { + if (hsotg->core_params->dma_desc_enable > 0) + dev_dbg(hsotg->dev, "Using Descriptor DMA mode\n"); + else + dev_dbg(hsotg->dev, "Using Buffer DMA mode\n"); + } else { + dev_dbg(hsotg->dev, "Using Slave mode\n"); + hsotg->core_params->dma_desc_enable = 0; + } + + if (hsotg->core_params->ahb_single > 0) + ahbcfg |= GAHBCFG_AHB_SINGLE; + + if (hsotg->core_params->dma_enable > 0) + ahbcfg |= GAHBCFG_DMA_EN; + + writel(ahbcfg, hsotg->regs + GAHBCFG); + + return 0; +} + +static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg) +{ + u32 usbcfg; + + usbcfg = readl(hsotg->regs + GUSBCFG); + usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP); + + switch (hsotg->hwcfg2 & GHWCFG2_OP_MODE_MASK) { + case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE: + if (hsotg->core_params->otg_cap == + DWC2_CAP_PARAM_HNP_SRP_CAPABLE) + usbcfg |= GUSBCFG_HNPCAP; + if (hsotg->core_params->otg_cap != + DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE) + usbcfg |= GUSBCFG_SRPCAP; + break; + + case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST: + if (hsotg->core_params->otg_cap != + DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE) + usbcfg |= GUSBCFG_SRPCAP; + break; + + case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE: + case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE: + case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST: + default: + break; + } + + writel(usbcfg, hsotg->regs + GUSBCFG); +} + +/** + * dwc2_core_init() - Initializes the DWC_otg controller registers and + * prepares the core for device mode or host mode operation + * + * @hsotg: Programming view of the DWC_otg controller + * @select_phy: If true then also set the Phy type + */ +int dwc2_core_init(struct dwc2_hsotg *hsotg, bool select_phy) +{ + u32 usbcfg, otgctl; + int retval; + + dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); + + usbcfg = readl(hsotg->regs + GUSBCFG); + + /* Set ULPI External VBUS bit if needed */ + usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV; + if (hsotg->core_params->phy_ulpi_ext_vbus == + DWC2_PHY_ULPI_EXTERNAL_VBUS) + usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV; + + /* Set external TS Dline pulsing bit if needed */ + usbcfg &= ~GUSBCFG_TERMSELDLPULSE; + if (hsotg->core_params->ts_dline > 0) + usbcfg |= GUSBCFG_TERMSELDLPULSE; + + writel(usbcfg, hsotg->regs + GUSBCFG); + + /* Reset the Controller */ + dwc2_core_reset(hsotg); + + dev_dbg(hsotg->dev, "num_dev_perio_in_ep=%d\n", + hsotg->hwcfg4 >> GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT & + GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK >> + GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT); + + hsotg->total_fifo_size = hsotg->hwcfg3 >> GHWCFG3_DFIFO_DEPTH_SHIFT & + GHWCFG3_DFIFO_DEPTH_MASK >> GHWCFG3_DFIFO_DEPTH_SHIFT; + hsotg->rx_fifo_size = readl(hsotg->regs + GRXFSIZ); + hsotg->nperio_tx_fifo_size = + readl(hsotg->regs + GNPTXFSIZ) >> 16 & 0xffff; + + dev_dbg(hsotg->dev, "Total FIFO SZ=%d\n", hsotg->total_fifo_size); + dev_dbg(hsotg->dev, "RxFIFO SZ=%d\n", hsotg->rx_fifo_size); + dev_dbg(hsotg->dev, "NP TxFIFO SZ=%d\n", hsotg->nperio_tx_fifo_size); + + /* + * This needs to happen in FS mode before any other programming occurs + */ + dwc2_phy_init(hsotg, select_phy); + + /* Program the GAHBCFG Register */ + retval = dwc2_gahbcfg_init(hsotg); + if (retval) + return retval; + + /* Program the GUSBCFG register */ + dwc2_gusbcfg_init(hsotg); + + /* Program the GOTGCTL register */ + otgctl = readl(hsotg->regs + GOTGCTL); + otgctl &= ~GOTGCTL_OTGVER; + if (hsotg->core_params->otg_ver > 0) + otgctl |= GOTGCTL_OTGVER; + writel(otgctl, hsotg->regs + GOTGCTL); + dev_dbg(hsotg->dev, "OTG VER PARAM: %d\n", hsotg->core_params->otg_ver); + + /* Clear the SRP success bit for FS-I2c */ + hsotg->srp_success = 0; + + /* Enable common interrupts */ + dwc2_enable_common_interrupts(hsotg); + + /* + * Do device or host intialization based on mode during PCD and + * HCD initialization + */ + if (dwc2_is_host_mode(hsotg)) { + dev_dbg(hsotg->dev, "Host Mode\n"); + hsotg->op_state = OTG_STATE_A_HOST; + } else { + dev_dbg(hsotg->dev, "Device Mode\n"); + hsotg->op_state = OTG_STATE_B_PERIPHERAL; + } + + return 0; +} + +/** + * dwc2_enable_host_interrupts() - Enables the Host mode interrupts + * + * @hsotg: Programming view of DWC_otg controller + */ +void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg) +{ + u32 intmsk; + + dev_dbg(hsotg->dev, "%s()\n", __func__); + + /* Disable all interrupts */ + writel(0, hsotg->regs + GINTMSK); + writel(0, hsotg->regs + HAINTMSK); + + /* Clear any pending interrupts */ + writel(0xffffffff, hsotg->regs + GINTSTS); + + /* Enable the common interrupts */ + dwc2_enable_common_interrupts(hsotg); + + /* Enable host mode interrupts without disturbing common interrupts */ + intmsk = readl(hsotg->regs + GINTMSK); + intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT; + writel(intmsk, hsotg->regs + GINTMSK); +} + +/** + * dwc2_disable_host_interrupts() - Disables the Host Mode interrupts + * + * @hsotg: Programming view of DWC_otg controller + */ +void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg) +{ + u32 intmsk = readl(hsotg->regs + GINTMSK); + + /* Disable host mode interrupts without disturbing common interrupts */ + intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT | + GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP); + writel(intmsk, hsotg->regs + GINTMSK); +} + +static void dwc2_config_fifos(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *params = hsotg->core_params; + u32 rxfsiz, nptxfsiz, ptxfsiz, hptxfsiz, dfifocfg; + + if (!(hsotg->hwcfg2 & GHWCFG2_DYNAMIC_FIFO) || + !params->enable_dynamic_fifo) + return; + + dev_dbg(hsotg->dev, "Total FIFO Size=%d\n", hsotg->total_fifo_size); + dev_dbg(hsotg->dev, "Rx FIFO Size=%d\n", params->host_rx_fifo_size); + dev_dbg(hsotg->dev, "NP Tx FIFO Size=%d\n", + params->host_nperio_tx_fifo_size); + dev_dbg(hsotg->dev, "P Tx FIFO Size=%d\n", + params->host_perio_tx_fifo_size); + + /* Rx FIFO */ + dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", + readl(hsotg->regs + GRXFSIZ)); + writel(params->host_rx_fifo_size, hsotg->regs + GRXFSIZ); + dev_dbg(hsotg->dev, "new grxfsiz=%08x\n", readl(hsotg->regs + GRXFSIZ)); + + /* Non-periodic Tx FIFO */ + dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n", + readl(hsotg->regs + GNPTXFSIZ)); + nptxfsiz = params->host_nperio_tx_fifo_size << + FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK; + nptxfsiz |= params->host_rx_fifo_size << + FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK; + writel(nptxfsiz, hsotg->regs + GNPTXFSIZ); + dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n", + readl(hsotg->regs + GNPTXFSIZ)); + + /* Periodic Tx FIFO */ + dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n", + readl(hsotg->regs + HPTXFSIZ)); + ptxfsiz = params->host_perio_tx_fifo_size << + FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK; + ptxfsiz |= (params->host_rx_fifo_size + + params->host_nperio_tx_fifo_size) << + FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK; + writel(ptxfsiz, hsotg->regs + HPTXFSIZ); + dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n", + readl(hsotg->regs + HPTXFSIZ)); + + if (hsotg->core_params->en_multiple_tx_fifo > 0 && + hsotg->snpsid <= DWC2_CORE_REV_2_94a) { + /* + * Global DFIFOCFG calculation for Host mode - + * include RxFIFO, NPTXFIFO and HPTXFIFO + */ + dfifocfg = readl(hsotg->regs + GDFIFOCFG); + rxfsiz = readl(hsotg->regs + GRXFSIZ) & 0x0000ffff; + nptxfsiz = readl(hsotg->regs + GNPTXFSIZ) >> 16 & 0xffff; + hptxfsiz = readl(hsotg->regs + HPTXFSIZ) >> 16 & 0xffff; + dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK; + dfifocfg |= (rxfsiz + nptxfsiz + hptxfsiz) << + GDFIFOCFG_EPINFOBASE_SHIFT & + GDFIFOCFG_EPINFOBASE_MASK; + writel(dfifocfg, hsotg->regs + GDFIFOCFG); + } +} + +/** + * dwc2_core_host_init() - Initializes the DWC_otg controller registers for + * Host mode + * + * @hsotg: Programming view of DWC_otg controller + * + * This function flushes the Tx and Rx FIFOs and flushes any entries in the + * request queues. Host channels are reset to ensure that they are ready for + * performing transfers. + */ +void dwc2_core_host_init(struct dwc2_hsotg *hsotg) +{ + u32 hcfg, hfir, otgctl; + + dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); + + /* Restart the Phy Clock */ + writel(0, hsotg->regs + PCGCTL); + + /* Initialize Host Configuration Register */ + dwc2_init_fs_ls_pclk_sel(hsotg); + if (hsotg->core_params->speed == DWC2_SPEED_PARAM_FULL) { + hcfg = readl(hsotg->regs + HCFG); + hcfg |= HCFG_FSLSSUPP; + writel(hcfg, hsotg->regs + HCFG); + } + + /* + * This bit allows dynamic reloading of the HFIR register during + * runtime. This bit needs to be programmed during inital configuration + * and its value must not be changed during runtime. + */ + if (hsotg->core_params->reload_ctl > 0) { + hfir = readl(hsotg->regs + HFIR); + hfir |= HFIR_RLDCTRL; + writel(hfir, hsotg->regs + HFIR); + } + + if (hsotg->core_params->dma_desc_enable > 0) { + u32 op_mode = hsotg->hwcfg2 & GHWCFG2_OP_MODE_MASK; + + if (hsotg->snpsid < DWC2_CORE_REV_2_90a || + !(hsotg->hwcfg4 & GHWCFG4_DESC_DMA) || + op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE || + op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE || + op_mode == GHWCFG2_OP_MODE_UNDEFINED) { + dev_err(hsotg->dev, + "Hardware does not support descriptor DMA mode -\n"); + dev_err(hsotg->dev, + "falling back to buffer DMA mode.\n"); + hsotg->core_params->dma_desc_enable = 0; + } else { + hcfg = readl(hsotg->regs + HCFG); + hcfg |= HCFG_DESCDMA; + writel(hcfg, hsotg->regs + HCFG); + } + } + + /* Configure data FIFO sizes */ + dwc2_config_fifos(hsotg); + + /* TODO - check this */ + /* Clear Host Set HNP Enable in the OTG Control Register */ + otgctl = readl(hsotg->regs + GOTGCTL); + otgctl &= ~GOTGCTL_HSTSETHNPEN; + writel(otgctl, hsotg->regs + GOTGCTL); + + /* Make sure the FIFOs are flushed */ + dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */); + dwc2_flush_rx_fifo(hsotg); + + /* Clear Host Set HNP Enable in the OTG Control Register */ + otgctl = readl(hsotg->regs + GOTGCTL); + otgctl &= ~GOTGCTL_HSTSETHNPEN; + writel(otgctl, hsotg->regs + GOTGCTL); + + if (hsotg->core_params->dma_desc_enable <= 0) { + int num_channels, i; + u32 hcchar; + + /* Flush out any leftover queued requests */ + num_channels = hsotg->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + hcchar = readl(hsotg->regs + HCCHAR(i)); + hcchar &= ~HCCHAR_CHENA; + hcchar |= HCCHAR_CHDIS; + hcchar &= ~HCCHAR_EPDIR; + writel(hcchar, hsotg->regs + HCCHAR(i)); + } + + /* Halt all channels to put them into a known state */ + for (i = 0; i < num_channels; i++) { + int count = 0; + + hcchar = readl(hsotg->regs + HCCHAR(i)); + hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS; + hcchar &= ~HCCHAR_EPDIR; + writel(hcchar, hsotg->regs + HCCHAR(i)); + dev_dbg(hsotg->dev, "%s: Halt channel %d\n", + __func__, i); + do { + hcchar = readl(hsotg->regs + HCCHAR(i)); + if (++count > 1000) { + dev_err(hsotg->dev, + "Unable to clear enable on channel %d\n", + i); + break; + } + udelay(1); + } while (hcchar & HCCHAR_CHENA); + } + } + + /* Turn on the vbus power */ + dev_dbg(hsotg->dev, "Init: Port Power? op_state=%d\n", hsotg->op_state); + if (hsotg->op_state == OTG_STATE_A_HOST) { + u32 hprt0 = dwc2_read_hprt0(hsotg); + + dev_dbg(hsotg->dev, "Init: Power Port (%d)\n", + !!(hprt0 & HPRT0_PWR)); + if (!(hprt0 & HPRT0_PWR)) { + hprt0 |= HPRT0_PWR; + writel(hprt0, hsotg->regs + HPRT0); + } + } + + dwc2_enable_host_interrupts(hsotg); +} + +static void dwc2_hc_enable_slave_ints(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 hcintmsk = HCINTMSK_CHHLTD; + + switch (chan->ep_type) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + dev_vdbg(hsotg->dev, "control/bulk\n"); + hcintmsk |= HCINTMSK_XFERCOMPL; + hcintmsk |= HCINTMSK_STALL; + hcintmsk |= HCINTMSK_XACTERR; + hcintmsk |= HCINTMSK_DATATGLERR; + if (chan->ep_is_in) { + hcintmsk |= HCINTMSK_BBLERR; + } else { + hcintmsk |= HCINTMSK_NAK; + hcintmsk |= HCINTMSK_NYET; + if (chan->do_ping) + hcintmsk |= HCINTMSK_ACK; + } + + if (chan->do_split) { + hcintmsk |= HCINTMSK_NAK; + if (chan->complete_split) + hcintmsk |= HCINTMSK_NYET; + else + hcintmsk |= HCINTMSK_ACK; + } + + if (chan->error_state) + hcintmsk |= HCINTMSK_ACK; + break; + + case USB_ENDPOINT_XFER_INT: + dev_vdbg(hsotg->dev, "intr\n"); + hcintmsk |= HCINTMSK_XFERCOMPL; + hcintmsk |= HCINTMSK_NAK; + hcintmsk |= HCINTMSK_STALL; + hcintmsk |= HCINTMSK_XACTERR; + hcintmsk |= HCINTMSK_DATATGLERR; + hcintmsk |= HCINTMSK_FRMOVRUN; + + if (chan->ep_is_in) + hcintmsk |= HCINTMSK_BBLERR; + if (chan->error_state) + hcintmsk |= HCINTMSK_ACK; + if (chan->do_split) { + if (chan->complete_split) + hcintmsk |= HCINTMSK_NYET; + else + hcintmsk |= HCINTMSK_ACK; + } + break; + + case USB_ENDPOINT_XFER_ISOC: + dev_vdbg(hsotg->dev, "isoc\n"); + hcintmsk |= HCINTMSK_XFERCOMPL; + hcintmsk |= HCINTMSK_FRMOVRUN; + hcintmsk |= HCINTMSK_ACK; + + if (chan->ep_is_in) { + hcintmsk |= HCINTMSK_XACTERR; + hcintmsk |= HCINTMSK_BBLERR; + } + break; + default: + dev_err(hsotg->dev, "## Unknown EP type ##\n"); + break; + } + + writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num)); + dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk); +} + +static void dwc2_hc_enable_dma_ints(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 hcintmsk = HCINTMSK_CHHLTD; + + /* + * For Descriptor DMA mode core halts the channel on AHB error. + * Interrupt is not required. + */ + if (hsotg->core_params->dma_desc_enable <= 0) { + dev_vdbg(hsotg->dev, "desc DMA disabled\n"); + hcintmsk |= HCINTMSK_AHBERR; + } else { + dev_vdbg(hsotg->dev, "desc DMA enabled\n"); + if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) + hcintmsk |= HCINTMSK_XFERCOMPL; + } + + if (chan->error_state && !chan->do_split && + chan->ep_type != USB_ENDPOINT_XFER_ISOC) { + dev_vdbg(hsotg->dev, "setting ACK\n"); + hcintmsk |= HCINTMSK_ACK; + if (chan->ep_is_in) { + hcintmsk |= HCINTMSK_DATATGLERR; + if (chan->ep_type != USB_ENDPOINT_XFER_INT) + hcintmsk |= HCINTMSK_NAK; + } + } + + writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num)); + dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk); +} + +static void dwc2_hc_enable_ints(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 intmsk; + + if (hsotg->core_params->dma_enable > 0) { + dev_vdbg(hsotg->dev, "DMA enabled\n"); + dwc2_hc_enable_dma_ints(hsotg, chan); + } else { + dev_vdbg(hsotg->dev, "DMA disabled\n"); + dwc2_hc_enable_slave_ints(hsotg, chan); + } + + /* Enable the top level host channel interrupt */ + intmsk = readl(hsotg->regs + HAINTMSK); + intmsk |= 1 << chan->hc_num; + writel(intmsk, hsotg->regs + HAINTMSK); + dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk); + + /* Make sure host channel interrupts are enabled */ + intmsk = readl(hsotg->regs + GINTMSK); + intmsk |= GINTSTS_HCHINT; + writel(intmsk, hsotg->regs + GINTMSK); + dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk); +} + +/** + * dwc2_hc_init() - Prepares a host channel for transferring packets to/from + * a specific endpoint + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel + * + * The HCCHARn register is set up with the characteristics specified in chan. + * Host channel interrupts that may need to be serviced while this transfer is + * in progress are enabled. + */ +void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan) +{ + u8 hc_num = chan->hc_num; + u32 hcintmsk; + u32 hcchar; + u32 hcsplt = 0; + + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + /* Clear old interrupt conditions for this host channel */ + hcintmsk = 0xffffffff; + hcintmsk &= ~HCINTMSK_RESERVED14_31; + writel(hcintmsk, hsotg->regs + HCINT(hc_num)); + + /* Enable channel interrupts required for this transfer */ + dwc2_hc_enable_ints(hsotg, chan); + + /* + * Program the HCCHARn register with the endpoint characteristics for + * the current transfer + */ + hcchar = chan->dev_addr << HCCHAR_DEVADDR_SHIFT & HCCHAR_DEVADDR_MASK; + hcchar |= chan->ep_num << HCCHAR_EPNUM_SHIFT & HCCHAR_EPNUM_MASK; + if (chan->ep_is_in) + hcchar |= HCCHAR_EPDIR; + if (chan->speed == USB_SPEED_LOW) + hcchar |= HCCHAR_LSPDDEV; + hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK; + hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK; + writel(hcchar, hsotg->regs + HCCHAR(hc_num)); + dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n", hc_num, hcchar); + + dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, hc_num); + dev_vdbg(hsotg->dev, " Dev Addr: %d\n", + hcchar >> HCCHAR_DEVADDR_SHIFT & + HCCHAR_DEVADDR_MASK >> HCCHAR_DEVADDR_SHIFT); + dev_vdbg(hsotg->dev, " Ep Num: %d\n", + hcchar >> HCCHAR_EPNUM_SHIFT & + HCCHAR_EPNUM_MASK >> HCCHAR_EPNUM_SHIFT); + dev_vdbg(hsotg->dev, " Is In: %d\n", !!(hcchar & HCCHAR_EPDIR)); + dev_vdbg(hsotg->dev, " Is Low Speed: %d\n", + !!(hcchar & HCCHAR_LSPDDEV)); + dev_vdbg(hsotg->dev, " Ep Type: %d\n", + hcchar >> HCCHAR_EPTYPE_SHIFT & + HCCHAR_EPTYPE_MASK >> HCCHAR_EPTYPE_SHIFT); + dev_vdbg(hsotg->dev, " Max Pkt: %d\n", + hcchar >> HCCHAR_MPS_SHIFT & + HCCHAR_MPS_MASK >> HCCHAR_MPS_SHIFT); + dev_vdbg(hsotg->dev, " Multi Cnt: %d\n", + hcchar >> HCCHAR_MULTICNT_SHIFT & + HCCHAR_MULTICNT_MASK >> HCCHAR_MULTICNT_SHIFT); + + /* Program the HCSPLT register for SPLITs */ + if (chan->do_split) { + dev_vdbg(hsotg->dev, "Programming HC %d with split --> %s\n", + hc_num, chan->complete_split ? "CSPLIT" : "SSPLIT"); + if (chan->complete_split) + hcsplt |= HCSPLT_COMPSPLT; + hcsplt |= chan->xact_pos << HCSPLT_XACTPOS_SHIFT & + HCSPLT_XACTPOS_MASK; + hcsplt |= chan->hub_addr << HCSPLT_HUBADDR_SHIFT & + HCSPLT_HUBADDR_MASK; + hcsplt |= chan->hub_port << HCSPLT_PRTADDR_SHIFT & + HCSPLT_PRTADDR_MASK; + dev_vdbg(hsotg->dev, " comp split %d\n", + chan->complete_split); + dev_vdbg(hsotg->dev, " xact pos %d\n", chan->xact_pos); + dev_vdbg(hsotg->dev, " hub addr %d\n", chan->hub_addr); + dev_vdbg(hsotg->dev, " hub port %d\n", chan->hub_port); + dev_vdbg(hsotg->dev, " is_in %d\n", chan->ep_is_in); + dev_vdbg(hsotg->dev, " Max Pkt %d\n", + hcchar >> HCCHAR_MPS_SHIFT & + HCCHAR_MPS_MASK >> HCCHAR_MPS_SHIFT); + dev_vdbg(hsotg->dev, " xferlen %d\n", chan->xfer_len); + } + + writel(hcsplt, hsotg->regs + HCSPLT(hc_num)); +} + +/** + * dwc2_hc_halt() - Attempts to halt a host channel + * + * @hsotg: Controller register interface + * @chan: Host channel to halt + * @halt_status: Reason for halting the channel + * + * This function should only be called in Slave mode or to abort a transfer in + * either Slave mode or DMA mode. Under normal circumstances in DMA mode, the + * controller halts the channel when the transfer is complete or a condition + * occurs that requires application intervention. + * + * In slave mode, checks for a free request queue entry, then sets the Channel + * Enable and Channel Disable bits of the Host Channel Characteristics + * register of the specified channel to intiate the halt. If there is no free + * request queue entry, sets only the Channel Disable bit of the HCCHARn + * register to flush requests for this channel. In the latter case, sets a + * flag to indicate that the host channel needs to be halted when a request + * queue slot is open. + * + * In DMA mode, always sets the Channel Enable and Channel Disable bits of the + * HCCHARn register. The controller ensures there is space in the request + * queue before submitting the halt request. + * + * Some time may elapse before the core flushes any posted requests for this + * host channel and halts. The Channel Halted interrupt handler completes the + * deactivation of the host channel. + */ +void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan, + enum dwc2_halt_status halt_status) +{ + u32 nptxsts, hptxsts, hcchar; + + dev_vdbg(hsotg->dev, "%s()\n", __func__); + if (halt_status == DWC2_HC_XFER_NO_HALT_STATUS) + dev_err(hsotg->dev, "!!! halt_status = %d !!!\n", halt_status); + + if (halt_status == DWC2_HC_XFER_URB_DEQUEUE || + halt_status == DWC2_HC_XFER_AHB_ERR) { + /* + * Disable all channel interrupts except Ch Halted. The QTD + * and QH state associated with this transfer has been cleared + * (in the case of URB_DEQUEUE), so the channel needs to be + * shut down carefully to prevent crashes. + */ + u32 hcintmsk = HCINTMSK_CHHLTD; + + dev_vdbg(hsotg->dev, "dequeue/error\n"); + writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num)); + + /* + * Make sure no other interrupts besides halt are currently + * pending. Handling another interrupt could cause a crash due + * to the QTD and QH state. + */ + writel(~hcintmsk, hsotg->regs + HCINT(chan->hc_num)); + + /* + * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR + * even if the channel was already halted for some other + * reason + */ + chan->halt_status = halt_status; + + hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); + if (!(hcchar & HCCHAR_CHENA)) { + /* + * The channel is either already halted or it hasn't + * started yet. In DMA mode, the transfer may halt if + * it finishes normally or a condition occurs that + * requires driver intervention. Don't want to halt + * the channel again. In either Slave or DMA mode, + * it's possible that the transfer has been assigned + * to a channel, but not started yet when an URB is + * dequeued. Don't want to halt a channel that hasn't + * started yet. + */ + return; + } + } + if (chan->halt_pending) { + /* + * A halt has already been issued for this channel. This might + * happen when a transfer is aborted by a higher level in + * the stack. + */ + dev_vdbg(hsotg->dev, + "*** %s: Channel %d, chan->halt_pending already set ***\n", + __func__, chan->hc_num); + return; + } + + hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); + + /* No need to set the bit in DDMA for disabling the channel */ + /* TODO check it everywhere channel is disabled */ + if (hsotg->core_params->dma_desc_enable <= 0) { + dev_vdbg(hsotg->dev, "desc DMA disabled\n"); + hcchar |= HCCHAR_CHENA; + } else { + dev_dbg(hsotg->dev, "desc DMA enabled\n"); + } + hcchar |= HCCHAR_CHDIS; + + if (hsotg->core_params->dma_enable <= 0) { + dev_vdbg(hsotg->dev, "DMA not enabled\n"); + hcchar |= HCCHAR_CHENA; + + /* Check for space in the request queue to issue the halt */ + if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL || + chan->ep_type == USB_ENDPOINT_XFER_BULK) { + dev_vdbg(hsotg->dev, "control/bulk\n"); + nptxsts = readl(hsotg->regs + GNPTXSTS); + if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) { + dev_vdbg(hsotg->dev, "Disabling channel\n"); + hcchar &= ~HCCHAR_CHENA; + } + } else { + dev_vdbg(hsotg->dev, "isoc/intr\n"); + hptxsts = readl(hsotg->regs + HPTXSTS); + if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 || + hsotg->queuing_high_bandwidth) { + dev_vdbg(hsotg->dev, "Disabling channel\n"); + hcchar &= ~HCCHAR_CHENA; + } + } + } else { + dev_vdbg(hsotg->dev, "DMA enabled\n"); + } + + writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); + chan->halt_status = halt_status; + + if (hcchar & HCCHAR_CHENA) { + dev_vdbg(hsotg->dev, "Channel enabled\n"); + chan->halt_pending = 1; + chan->halt_on_queue = 0; + } else { + dev_vdbg(hsotg->dev, "Channel disabled\n"); + chan->halt_on_queue = 1; + } + + dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, chan->hc_num); + dev_vdbg(hsotg->dev, " hcchar: 0x%08x\n", hcchar); + dev_vdbg(hsotg->dev, " halt_pending: %d\n", chan->halt_pending); + dev_vdbg(hsotg->dev, " halt_on_queue: %d\n", chan->halt_on_queue); + dev_vdbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); +} + +/** + * dwc2_hc_cleanup() - Clears the transfer state for a host channel + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Identifies the host channel to clean up + * + * This function is normally called after a transfer is done and the host + * channel is being released + */ +void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan) +{ + u32 hcintmsk; + + chan->xfer_started = 0; + + /* + * Clear channel interrupt enables and any unhandled channel interrupt + * conditions + */ + writel(0, hsotg->regs + HCINTMSK(chan->hc_num)); + hcintmsk = 0xffffffff; + hcintmsk &= ~HCINTMSK_RESERVED14_31; + writel(hcintmsk, hsotg->regs + HCINT(chan->hc_num)); +} + +/** + * dwc2_hc_set_even_odd_frame() - Sets the channel property that indicates in + * which frame a periodic transfer should occur + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Identifies the host channel to set up and its properties + * @hcchar: Current value of the HCCHAR register for the specified host channel + * + * This function has no effect on non-periodic transfers + */ +static void dwc2_hc_set_even_odd_frame(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, u32 *hcchar) +{ + u32 hfnum, frnum; + + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + hfnum = readl(hsotg->regs + HFNUM); + frnum = hfnum >> HFNUM_FRNUM_SHIFT & + HFNUM_FRNUM_MASK >> HFNUM_FRNUM_SHIFT; + + /* 1 if _next_ frame is odd, 0 if it's even */ + if (frnum & 0x1) + *hcchar |= HCCHAR_ODDFRM; + } +} + +static void dwc2_set_pid_isoc(struct dwc2_host_chan *chan) +{ + /* Set up the initial PID for the transfer */ + if (chan->speed == USB_SPEED_HIGH) { + if (chan->ep_is_in) { + if (chan->multi_count == 1) + chan->data_pid_start = DWC2_HC_PID_DATA0; + else if (chan->multi_count == 2) + chan->data_pid_start = DWC2_HC_PID_DATA1; + else + chan->data_pid_start = DWC2_HC_PID_DATA2; + } else { + if (chan->multi_count == 1) + chan->data_pid_start = DWC2_HC_PID_DATA0; + else + chan->data_pid_start = DWC2_HC_PID_MDATA; + } + } else { + chan->data_pid_start = DWC2_HC_PID_DATA0; + } +} + +/** + * dwc2_hc_write_packet() - Writes a packet into the Tx FIFO associated with + * the Host Channel + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel + * + * This function should only be called in Slave mode. For a channel associated + * with a non-periodic EP, the non-periodic Tx FIFO is written. For a channel + * associated with a periodic EP, the periodic Tx FIFO is written. + * + * Upon return the xfer_buf and xfer_count fields in chan are incremented by + * the number of bytes written to the Tx FIFO. + */ +static void dwc2_hc_write_packet(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 i; + u32 remaining_count; + u32 byte_count; + u32 dword_count; + u32 __iomem *data_fifo; + u32 *data_buf = (u32 *)chan->xfer_buf; + + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + data_fifo = (u32 __iomem *)(hsotg->regs + HCFIFO(chan->hc_num)); + + remaining_count = chan->xfer_len - chan->xfer_count; + if (remaining_count > chan->max_packet) + byte_count = chan->max_packet; + else + byte_count = remaining_count; + + dword_count = (byte_count + 3) / 4; + + if (((unsigned long)data_buf & 0x3) == 0) { + /* xfer_buf is DWORD aligned */ + for (i = 0; i < dword_count; i++, data_buf++) + writel(*data_buf, data_fifo); + } else { + /* xfer_buf is not DWORD aligned */ + for (i = 0; i < dword_count; i++, data_buf++) { + u32 data = data_buf[0] | data_buf[1] << 8 | + data_buf[2] << 16 | data_buf[3] << 24; + writel(data, data_fifo); + } + } + + chan->xfer_count += byte_count; + chan->xfer_buf += byte_count; +} + +/** + * dwc2_hc_start_transfer() - Does the setup for a data transfer for a host + * channel and starts the transfer + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel. The xfer_len value + * may be reduced to accommodate the max widths of the XferSize and + * PktCnt fields in the HCTSIZn register. The multi_count value may be + * changed to reflect the final xfer_len value. + * + * This function may be called in either Slave mode or DMA mode. In Slave mode, + * the caller must ensure that there is sufficient space in the request queue + * and Tx Data FIFO. + * + * For an OUT transfer in Slave mode, it loads a data packet into the + * appropriate FIFO. If necessary, additional data packets are loaded in the + * Host ISR. + * + * For an IN transfer in Slave mode, a data packet is requested. The data + * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, + * additional data packets are requested in the Host ISR. + * + * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ + * register along with a packet count of 1 and the channel is enabled. This + * causes a single PING transaction to occur. Other fields in HCTSIZ are + * simply set to 0 since no data transfer occurs in this case. + * + * For a PING transfer in DMA mode, the HCTSIZ register is initialized with + * all the information required to perform the subsequent data transfer. In + * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the + * controller performs the entire PING protocol, then starts the data + * transfer. + */ +void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 max_hc_xfer_size = hsotg->core_params->max_transfer_size; + u16 max_hc_pkt_count = hsotg->core_params->max_packet_count; + u32 hcchar; + u32 hctsiz = 0; + u16 num_packets; + + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + if (chan->do_ping) { + if (hsotg->core_params->dma_enable <= 0) { + dev_vdbg(hsotg->dev, "ping, no DMA\n"); + dwc2_hc_do_ping(hsotg, chan); + chan->xfer_started = 1; + return; + } else { + dev_vdbg(hsotg->dev, "ping, DMA\n"); + hctsiz |= TSIZ_DOPNG; + } + } + + if (chan->do_split) { + dev_vdbg(hsotg->dev, "split\n"); + num_packets = 1; + + if (chan->complete_split && !chan->ep_is_in) + /* + * For CSPLIT OUT Transfer, set the size to 0 so the + * core doesn't expect any data written to the FIFO + */ + chan->xfer_len = 0; + else if (chan->ep_is_in || chan->xfer_len > chan->max_packet) + chan->xfer_len = chan->max_packet; + else if (!chan->ep_is_in && chan->xfer_len > 188) + chan->xfer_len = 188; + + hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT & + TSIZ_XFERSIZE_MASK; + } else { + dev_vdbg(hsotg->dev, "no split\n"); + /* + * Ensure that the transfer length and packet count will fit + * in the widths allocated for them in the HCTSIZn register + */ + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + /* + * Make sure the transfer size is no larger than one + * (micro)frame's worth of data. (A check was done + * when the periodic transfer was accepted to ensure + * that a (micro)frame's worth of data can be + * programmed into a channel.) + */ + u32 max_periodic_len = + chan->multi_count * chan->max_packet; + + if (chan->xfer_len > max_periodic_len) + chan->xfer_len = max_periodic_len; + } else if (chan->xfer_len > max_hc_xfer_size) { + /* + * Make sure that xfer_len is a multiple of max packet + * size + */ + chan->xfer_len = + max_hc_xfer_size - chan->max_packet + 1; + } + + if (chan->xfer_len > 0) { + num_packets = (chan->xfer_len + chan->max_packet - 1) / + chan->max_packet; + if (num_packets > max_hc_pkt_count) { + num_packets = max_hc_pkt_count; + chan->xfer_len = num_packets * chan->max_packet; + } + } else { + /* Need 1 packet for transfer length of 0 */ + num_packets = 1; + } + + if (chan->ep_is_in) + /* + * Always program an integral # of max packets for IN + * transfers + */ + chan->xfer_len = num_packets * chan->max_packet; + + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) + /* + * Make sure that the multi_count field matches the + * actual transfer length + */ + chan->multi_count = num_packets; + + if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) + dwc2_set_pid_isoc(chan); + + hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT & + TSIZ_XFERSIZE_MASK; + } + + chan->start_pkt_count = num_packets; + hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK; + hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT & + TSIZ_SC_MC_PID_MASK; + writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num)); + dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n", + hctsiz, chan->hc_num); + + dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, chan->hc_num); + dev_vdbg(hsotg->dev, " Xfer Size: %d\n", + hctsiz >> TSIZ_XFERSIZE_SHIFT & + TSIZ_XFERSIZE_MASK >> TSIZ_XFERSIZE_SHIFT); + dev_vdbg(hsotg->dev, " Num Pkts: %d\n", + hctsiz >> TSIZ_PKTCNT_SHIFT & + TSIZ_PKTCNT_MASK >> TSIZ_PKTCNT_SHIFT); + dev_vdbg(hsotg->dev, " Start PID: %d\n", + hctsiz >> TSIZ_SC_MC_PID_SHIFT & + TSIZ_SC_MC_PID_MASK >> TSIZ_SC_MC_PID_SHIFT); + + if (hsotg->core_params->dma_enable > 0) { + dma_addr_t dma_addr; + + if (chan->align_buf) { + dev_vdbg(hsotg->dev, "align_buf\n"); + dma_addr = chan->align_buf; + } else { + dma_addr = chan->xfer_dma; + } + writel((u32)dma_addr, hsotg->regs + HCDMA(chan->hc_num)); + dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n", + (unsigned long)dma_addr, chan->hc_num); + } + + /* Start the split */ + if (chan->do_split) { + u32 hcsplt = readl(hsotg->regs + HCSPLT(chan->hc_num)); + + hcsplt |= HCSPLT_SPLTENA; + writel(hcsplt, hsotg->regs + HCSPLT(chan->hc_num)); + } + + hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); + hcchar &= ~HCCHAR_MULTICNT_MASK; + hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT & + HCCHAR_MULTICNT_MASK; + dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar); + + if (hcchar & HCCHAR_CHDIS) + dev_warn(hsotg->dev, + "%s: chdis set, channel %d, hcchar 0x%08x\n", + __func__, chan->hc_num, hcchar); + + /* Set host channel enable after all other setup is complete */ + hcchar |= HCCHAR_CHENA; + hcchar &= ~HCCHAR_CHDIS; + + dev_vdbg(hsotg->dev, " Multi Cnt: %d\n", + hcchar >> HCCHAR_MULTICNT_SHIFT & + HCCHAR_MULTICNT_MASK >> HCCHAR_MULTICNT_SHIFT); + + writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); + dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar, + chan->hc_num); + + chan->xfer_started = 1; + chan->requests++; + + if (hsotg->core_params->dma_enable <= 0 && + !chan->ep_is_in && chan->xfer_len > 0) + /* Load OUT packet into the appropriate Tx FIFO */ + dwc2_hc_write_packet(hsotg, chan); +} + +/** + * dwc2_hc_start_transfer_ddma() - Does the setup for a data transfer for a + * host channel and starts the transfer in Descriptor DMA mode + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel + * + * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set. + * Sets PID and NTD values. For periodic transfers initializes SCHED_INFO field + * with micro-frame bitmap. + * + * Initializes HCDMA register with descriptor list address and CTD value then + * starts the transfer via enabling the channel. + */ +void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 hcchar; + u32 hc_dma; + u32 hctsiz = 0; + + if (chan->do_ping) + hctsiz |= TSIZ_DOPNG; + + if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) + dwc2_set_pid_isoc(chan); + + /* Packet Count and Xfer Size are not used in Descriptor DMA mode */ + hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT & + TSIZ_SC_MC_PID_MASK; + + /* 0 - 1 descriptor, 1 - 2 descriptors, etc */ + hctsiz |= (chan->ntd - 1) << TSIZ_NTD_SHIFT & TSIZ_NTD_MASK; + + /* Non-zero only for high-speed interrupt endpoints */ + hctsiz |= chan->schinfo << TSIZ_SCHINFO_SHIFT & TSIZ_SCHINFO_MASK; + + dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, chan->hc_num); + dev_vdbg(hsotg->dev, " Start PID: %d\n", chan->data_pid_start); + dev_vdbg(hsotg->dev, " NTD: %d\n", chan->ntd - 1); + + writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num)); + + hc_dma = (u32)chan->desc_list_addr & HCDMA_DMA_ADDR_MASK; + + /* Always start from first descriptor */ + hc_dma &= ~HCDMA_CTD_MASK; + writel(hc_dma, hsotg->regs + HCDMA(chan->hc_num)); + dev_vdbg(hsotg->dev, "Wrote %08x to HCDMA(%d)\n", hc_dma, chan->hc_num); + + hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); + hcchar &= ~HCCHAR_MULTICNT_MASK; + hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT & + HCCHAR_MULTICNT_MASK; + + if (hcchar & HCCHAR_CHDIS) + dev_warn(hsotg->dev, + "%s: chdis set, channel %d, hcchar 0x%08x\n", + __func__, chan->hc_num, hcchar); + + /* Set host channel enable after all other setup is complete */ + hcchar |= HCCHAR_CHENA; + hcchar &= ~HCCHAR_CHDIS; + + dev_vdbg(hsotg->dev, " Multi Cnt: %d\n", + hcchar >> HCCHAR_MULTICNT_SHIFT & + HCCHAR_MULTICNT_MASK >> HCCHAR_MULTICNT_SHIFT); + + writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); + dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar, + chan->hc_num); + + chan->xfer_started = 1; + chan->requests++; +} + +/** + * dwc2_hc_continue_transfer() - Continues a data transfer that was started by + * a previous call to dwc2_hc_start_transfer() + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel + * + * The caller must ensure there is sufficient space in the request queue and Tx + * Data FIFO. This function should only be called in Slave mode. In DMA mode, + * the controller acts autonomously to complete transfers programmed to a host + * channel. + * + * For an OUT transfer, a new data packet is loaded into the appropriate FIFO + * if there is any data remaining to be queued. For an IN transfer, another + * data packet is always requested. For the SETUP phase of a control transfer, + * this function does nothing. + * + * Return: 1 if a new request is queued, 0 if no more requests are required + * for this transfer + */ +int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, chan->hc_num); + + if (chan->do_split) + /* SPLITs always queue just once per channel */ + return 0; + + if (chan->data_pid_start == DWC2_HC_PID_SETUP) + /* SETUPs are queued only once since they can't be NAK'd */ + return 0; + + if (chan->ep_is_in) { + /* + * Always queue another request for other IN transfers. If + * back-to-back INs are issued and NAKs are received for both, + * the driver may still be processing the first NAK when the + * second NAK is received. When the interrupt handler clears + * the NAK interrupt for the first NAK, the second NAK will + * not be seen. So we can't depend on the NAK interrupt + * handler to requeue a NAK'd request. Instead, IN requests + * are issued each time this function is called. When the + * transfer completes, the extra requests for the channel will + * be flushed. + */ + u32 hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); + + dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar); + hcchar |= HCCHAR_CHENA; + hcchar &= ~HCCHAR_CHDIS; + dev_vdbg(hsotg->dev, " IN xfer: hcchar = 0x%08x\n", hcchar); + writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); + chan->requests++; + return 1; + } + + /* OUT transfers */ + + if (chan->xfer_count < chan->xfer_len) { + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + u32 hcchar = readl(hsotg->regs + + HCCHAR(chan->hc_num)); + + dwc2_hc_set_even_odd_frame(hsotg, chan, + &hcchar); + } + + /* Load OUT packet into the appropriate Tx FIFO */ + dwc2_hc_write_packet(hsotg, chan); + chan->requests++; + return 1; + } + + return 0; +} + +/** + * dwc2_hc_do_ping() - Starts a PING transfer + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel + * + * This function should only be called in Slave mode. The Do Ping bit is set in + * the HCTSIZ register, then the channel is enabled. + */ +void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan) +{ + u32 hcchar; + u32 hctsiz; + + dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, chan->hc_num); + + hctsiz = TSIZ_DOPNG; + hctsiz |= 1 << TSIZ_PKTCNT_SHIFT; + writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num)); + + hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); + hcchar |= HCCHAR_CHENA; + hcchar &= ~HCCHAR_CHDIS; + writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); +} + +/** + * dwc2_calc_frame_interval() - Calculates the correct frame Interval value for + * the HFIR register according to PHY type and speed + * + * @hsotg: Programming view of DWC_otg controller + * + * NOTE: The caller can modify the value of the HFIR register only after the + * Port Enable bit of the Host Port Control and Status register (HPRT.EnaPort) + * has been set + */ +u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg) +{ + u32 usbcfg; + u32 hwcfg2; + u32 hprt0; + int clock = 60; /* default value */ + + usbcfg = readl(hsotg->regs + GUSBCFG); + hwcfg2 = readl(hsotg->regs + GHWCFG2); + hprt0 = readl(hsotg->regs + HPRT0); + + if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) && + !(usbcfg & GUSBCFG_PHYIF16)) + clock = 60; + if ((usbcfg & GUSBCFG_PHYSEL) && (hwcfg2 & GHWCFG2_FS_PHY_TYPE_MASK) == + GHWCFG2_FS_PHY_TYPE_SHARED_ULPI) + clock = 48; + if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && + !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16)) + clock = 30; + if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && + !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && !(usbcfg & GUSBCFG_PHYIF16)) + clock = 60; + if ((usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && + !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16)) + clock = 48; + if ((usbcfg & GUSBCFG_PHYSEL) && !(usbcfg & GUSBCFG_PHYIF16) && + (hwcfg2 & GHWCFG2_FS_PHY_TYPE_MASK) == + GHWCFG2_FS_PHY_TYPE_SHARED_UTMI) + clock = 48; + if ((usbcfg & GUSBCFG_PHYSEL) && (hwcfg2 & GHWCFG2_FS_PHY_TYPE_MASK) == + GHWCFG2_FS_PHY_TYPE_DEDICATED) + clock = 48; + + if ((hprt0 & HPRT0_SPD_MASK) == 0) + /* High speed case */ + return 125 * clock; + else + /* FS/LS case */ + return 1000 * clock; +} + +/** + * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination + * buffer + * + * @core_if: Programming view of DWC_otg controller + * @dest: Destination buffer for the packet + * @bytes: Number of bytes to copy to the destination + */ +void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes) +{ + u32 __iomem *fifo = hsotg->regs + HCFIFO(0); + u32 *data_buf = (u32 *)dest; + int word_count = (bytes + 3) / 4; + int i; + + /* + * Todo: Account for the case where dest is not dword aligned. This + * requires reading data from the FIFO into a u32 temp buffer, then + * moving it into the data buffer. + */ + + dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes); + + for (i = 0; i < word_count; i++, data_buf++) + *data_buf = readl(fifo); +} + +/** + * dwc2_dump_host_registers() - Prints the host registers + * + * @hsotg: Programming view of DWC_otg controller + * + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg) +{ +#ifdef DEBUG + u32 __iomem *addr; + int i; + + dev_dbg(hsotg->dev, "Host Global Registers\n"); + addr = hsotg->regs + HCFG; + dev_dbg(hsotg->dev, "HCFG @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HFIR; + dev_dbg(hsotg->dev, "HFIR @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HFNUM; + dev_dbg(hsotg->dev, "HFNUM @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HPTXSTS; + dev_dbg(hsotg->dev, "HPTXSTS @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HAINT; + dev_dbg(hsotg->dev, "HAINT @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HAINTMSK; + dev_dbg(hsotg->dev, "HAINTMSK @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + if (hsotg->core_params->dma_desc_enable > 0) { + addr = hsotg->regs + HFLBADDR; + dev_dbg(hsotg->dev, "HFLBADDR @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + } + + addr = hsotg->regs + HPRT0; + dev_dbg(hsotg->dev, "HPRT0 @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + + for (i = 0; i < hsotg->core_params->host_channels; i++) { + dev_dbg(hsotg->dev, "Host Channel %d Specific Registers\n", i); + addr = hsotg->regs + HCCHAR(i); + dev_dbg(hsotg->dev, "HCCHAR @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HCSPLT(i); + dev_dbg(hsotg->dev, "HCSPLT @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HCINT(i); + dev_dbg(hsotg->dev, "HCINT @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HCINTMSK(i); + dev_dbg(hsotg->dev, "HCINTMSK @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HCTSIZ(i); + dev_dbg(hsotg->dev, "HCTSIZ @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HCDMA(i); + dev_dbg(hsotg->dev, "HCDMA @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + if (hsotg->core_params->dma_desc_enable > 0) { + addr = hsotg->regs + HCDMAB(i); + dev_dbg(hsotg->dev, "HCDMAB @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + } + } +#endif +} + +/** + * dwc2_dump_global_registers() - Prints the core global registers + * + * @hsotg: Programming view of DWC_otg controller + * + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg) +{ +#ifdef DEBUG + u32 __iomem *addr; + int i, ep_num; + char *txfsiz; + + dev_dbg(hsotg->dev, "Core Global Registers\n"); + addr = hsotg->regs + GOTGCTL; + dev_dbg(hsotg->dev, "GOTGCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GOTGINT; + dev_dbg(hsotg->dev, "GOTGINT @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GAHBCFG; + dev_dbg(hsotg->dev, "GAHBCFG @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GUSBCFG; + dev_dbg(hsotg->dev, "GUSBCFG @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GRSTCTL; + dev_dbg(hsotg->dev, "GRSTCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GINTSTS; + dev_dbg(hsotg->dev, "GINTSTS @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GINTMSK; + dev_dbg(hsotg->dev, "GINTMSK @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GRXSTSR; + dev_dbg(hsotg->dev, "GRXSTSR @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GRXFSIZ; + dev_dbg(hsotg->dev, "GRXFSIZ @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GNPTXFSIZ; + dev_dbg(hsotg->dev, "GNPTXFSIZ @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GNPTXSTS; + dev_dbg(hsotg->dev, "GNPTXSTS @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GI2CCTL; + dev_dbg(hsotg->dev, "GI2CCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GPVNDCTL; + dev_dbg(hsotg->dev, "GPVNDCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GGPIO; + dev_dbg(hsotg->dev, "GGPIO @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GUID; + dev_dbg(hsotg->dev, "GUID @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GSNPSID; + dev_dbg(hsotg->dev, "GSNPSID @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GHWCFG1; + dev_dbg(hsotg->dev, "GHWCFG1 @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GHWCFG2; + dev_dbg(hsotg->dev, "GHWCFG2 @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GHWCFG3; + dev_dbg(hsotg->dev, "GHWCFG3 @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GHWCFG4; + dev_dbg(hsotg->dev, "GHWCFG4 @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GLPMCFG; + dev_dbg(hsotg->dev, "GLPMCFG @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GPWRDN; + dev_dbg(hsotg->dev, "GPWRDN @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GDFIFOCFG; + dev_dbg(hsotg->dev, "GDFIFOCFG @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HPTXFSIZ; + dev_dbg(hsotg->dev, "HPTXFSIZ @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + + if (hsotg->core_params->en_multiple_tx_fifo <= 0) { + ep_num = hsotg->hwcfg4 >> GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT & + GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK >> + GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT; + txfsiz = "DPTXFSIZ"; + } else { + ep_num = hsotg->hwcfg4 >> GHWCFG4_NUM_IN_EPS_SHIFT & + GHWCFG4_NUM_IN_EPS_MASK >> GHWCFG4_NUM_IN_EPS_SHIFT; + txfsiz = "DIENPTXF"; + } + + for (i = 0; i < ep_num; i++) { + addr = hsotg->regs + DPTXFSIZN(i + 1); + dev_dbg(hsotg->dev, "%s[%d] @0x%08lX : 0x%08X\n", txfsiz, i + 1, + (unsigned long)addr, readl(addr)); + } + + addr = hsotg->regs + PCGCTL; + dev_dbg(hsotg->dev, "PCGCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); +#endif +} + +/** + * dwc2_flush_tx_fifo() - Flushes a Tx FIFO + * + * @hsotg: Programming view of DWC_otg controller + * @num: Tx FIFO to flush + */ +void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num) +{ + u32 greset; + int count = 0; + + dev_vdbg(hsotg->dev, "Flush Tx FIFO %d\n", num); + + greset = GRSTCTL_TXFFLSH; + greset |= num << GRSTCTL_TXFNUM_SHIFT & GRSTCTL_TXFNUM_MASK; + writel(greset, hsotg->regs + GRSTCTL); + + do { + greset = readl(hsotg->regs + GRSTCTL); + if (++count > 10000) { + dev_warn(hsotg->dev, + "%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n", + __func__, greset, + readl(hsotg->regs + GNPTXSTS)); + break; + } + udelay(1); + } while (greset & GRSTCTL_TXFFLSH); + + /* Wait for at least 3 PHY Clocks */ + udelay(1); +} + +/** + * dwc2_flush_rx_fifo() - Flushes the Rx FIFO + * + * @hsotg: Programming view of DWC_otg controller + */ +void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg) +{ + u32 greset; + int count = 0; + + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + greset = GRSTCTL_RXFFLSH; + writel(greset, hsotg->regs + GRSTCTL); + + do { + greset = readl(hsotg->regs + GRSTCTL); + if (++count > 10000) { + dev_warn(hsotg->dev, "%s() HANG! GRSTCTL=%0x\n", + __func__, greset); + break; + } + udelay(1); + } while (greset & GRSTCTL_RXFFLSH); + + /* Wait for at least 3 PHY Clocks */ + udelay(1); +} + +#define DWC2_PARAM_TEST(a, b, c) ((a) < (b) || (a) > (c)) + +/* Parameter access functions */ +int dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + int retval = 0; + u32 op_mode; + + op_mode = hsotg->hwcfg2 & GHWCFG2_OP_MODE_MASK; + + switch (val) { + case DWC2_CAP_PARAM_HNP_SRP_CAPABLE: + if (op_mode != GHWCFG2_OP_MODE_HNP_SRP_CAPABLE) + valid = 0; + break; + case DWC2_CAP_PARAM_SRP_ONLY_CAPABLE: + switch (op_mode) { + case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE: + case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST: + break; + default: + valid = 0; + break; + } + break; + case DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE: + /* always valid */ + break; + default: + valid = 0; + break; + } + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for otg_cap parameter. Check HW configuration.\n", + val); + switch (op_mode) { + case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE: + val = DWC2_CAP_PARAM_HNP_SRP_CAPABLE; + break; + case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST: + val = DWC2_CAP_PARAM_SRP_ONLY_CAPABLE; + break; + default: + val = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; + break; + } + dev_dbg(hsotg->dev, "Setting otg_cap to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->otg_cap = val; + return retval; +} + +int dwc2_set_param_dma_enable(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + int retval = 0; + + if (val > 0 && (hsotg->hwcfg2 & GHWCFG2_ARCHITECTURE_MASK) == + GHWCFG2_SLAVE_ONLY_ARCH) + valid = 0; + if (val < 0) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for dma_enable parameter. Check HW configuration.\n", + val); + val = (hsotg->hwcfg2 & GHWCFG2_ARCHITECTURE_MASK) != + GHWCFG2_SLAVE_ONLY_ARCH; + dev_dbg(hsotg->dev, "Setting dma_enable to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->dma_enable = val; + return retval; +} + +int dwc2_set_param_dma_desc_enable(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + int retval = 0; + + if (val > 0 && (hsotg->core_params->dma_enable <= 0 || + !(hsotg->hwcfg4 & GHWCFG4_DESC_DMA))) + valid = 0; + if (val < 0) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for dma_desc_enable parameter. Check HW configuration.\n", + val); + val = (hsotg->core_params->dma_enable > 0 && + (hsotg->hwcfg4 & GHWCFG4_DESC_DMA)); + dev_dbg(hsotg->dev, "Setting dma_desc_enable to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->dma_desc_enable = val; + return retval; +} + +int dwc2_set_param_host_support_fs_ls_low_power(struct dwc2_hsotg *hsotg, + int val) +{ + int retval = 0; + + if (DWC2_PARAM_TEST(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, + "Wrong value for host_support_fs_low_power\n"); + dev_err(hsotg->dev, + "host_support_fs_low_power must be 0 or 1\n"); + } + val = 0; + dev_dbg(hsotg->dev, + "Setting host_support_fs_low_power to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->host_support_fs_ls_low_power = val; + return retval; +} + +int dwc2_set_param_enable_dynamic_fifo(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + int retval = 0; + + if (val > 0 && !(hsotg->hwcfg2 & GHWCFG2_DYNAMIC_FIFO)) + valid = 0; + if (val < 0) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for enable_dynamic_fifo parameter. Check HW configuration.\n", + val); + val = !!(hsotg->hwcfg2 & GHWCFG2_DYNAMIC_FIFO); + dev_dbg(hsotg->dev, "Setting enable_dynamic_fifo to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->enable_dynamic_fifo = val; + return retval; +} + +int dwc2_set_param_host_rx_fifo_size(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + int retval = 0; + + if (val < 16 || val > readl(hsotg->regs + GRXFSIZ)) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for host_rx_fifo_size. Check HW configuration.\n", + val); + val = readl(hsotg->regs + GRXFSIZ); + dev_dbg(hsotg->dev, "Setting host_rx_fifo_size to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->host_rx_fifo_size = val; + return retval; +} + +int dwc2_set_param_host_nperio_tx_fifo_size(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + int retval = 0; + + if (val < 16 || val > (readl(hsotg->regs + GNPTXFSIZ) >> 16 & 0xffff)) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for host_nperio_tx_fifo_size. Check HW configuration.\n", + val); + val = readl(hsotg->regs + GNPTXFSIZ) >> 16 & 0xffff; + dev_dbg(hsotg->dev, "Setting host_nperio_tx_fifo_size to %d\n", + val); + retval = -EINVAL; + } + + hsotg->core_params->host_nperio_tx_fifo_size = val; + return retval; +} + +int dwc2_set_param_host_perio_tx_fifo_size(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + int retval = 0; + + if (val < 16 || val > (hsotg->hptxfsiz >> 16)) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for host_perio_tx_fifo_size. Check HW configuration.\n", + val); + val = hsotg->hptxfsiz >> 16; + dev_dbg(hsotg->dev, "Setting host_perio_tx_fifo_size to %d\n", + val); + retval = -EINVAL; + } + + hsotg->core_params->host_perio_tx_fifo_size = val; + return retval; +} + +int dwc2_set_param_max_transfer_size(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + int retval = 0; + int width = hsotg->hwcfg3 >> GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT & + GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK >> + GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT; + + if (val < 2047 || val >= (1 << (width + 11))) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for max_transfer_size. Check HW configuration.\n", + val); + val = (1 << (width + 11)) - 1; + dev_dbg(hsotg->dev, "Setting max_transfer_size to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->max_transfer_size = val; + return retval; +} + +int dwc2_set_param_max_packet_count(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + int retval = 0; + int width = hsotg->hwcfg3 >> GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT & + GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK >> + GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT; + + if (val < 15 || val > (1 << (width + 4))) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for max_packet_count. Check HW configuration.\n", + val); + val = (1 << (width + 4)) - 1; + dev_dbg(hsotg->dev, "Setting max_packet_count to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->max_packet_count = val; + return retval; +} + +int dwc2_set_param_host_channels(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + int retval = 0; + int num_chan = hsotg->hwcfg2 >> GHWCFG2_NUM_HOST_CHAN_SHIFT & + GHWCFG2_NUM_HOST_CHAN_MASK >> GHWCFG2_NUM_HOST_CHAN_SHIFT; + + if (val < 1 || val > num_chan + 1) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for host_channels. Check HW configuration.\n", + val); + val = num_chan + 1; + dev_dbg(hsotg->dev, "Setting host_channels to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->host_channels = val; + return retval; +} + +int dwc2_set_param_phy_type(struct dwc2_hsotg *hsotg, int val) +{ +#ifndef NO_FS_PHY_HW_CHECKS + int valid = 0; + u32 hs_phy_type; + u32 fs_phy_type; +#endif + int retval = 0; + + if (DWC2_PARAM_TEST(val, DWC2_PHY_TYPE_PARAM_FS, + DWC2_PHY_TYPE_PARAM_ULPI)) { + if (val >= 0) { + dev_err(hsotg->dev, "Wrong value for phy_type\n"); + dev_err(hsotg->dev, "phy_type must be 0, 1 or 2\n"); + } + +#ifndef NO_FS_PHY_HW_CHECKS + valid = 0; +#else + val = 0; + dev_dbg(hsotg->dev, "Setting phy_type to %d\n", val); + retval = -EINVAL; +#endif + } + +#ifndef NO_FS_PHY_HW_CHECKS + hs_phy_type = hsotg->hwcfg2 & GHWCFG2_HS_PHY_TYPE_MASK; + fs_phy_type = hsotg->hwcfg2 & GHWCFG2_FS_PHY_TYPE_MASK; + + if (val == DWC2_PHY_TYPE_PARAM_UTMI && + (hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI || + hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI)) + valid = 1; + else if (val == DWC2_PHY_TYPE_PARAM_ULPI && + (hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI || + hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI)) + valid = 1; + else if (val == DWC2_PHY_TYPE_PARAM_FS && + fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) + valid = 1; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for phy_type. Check HW configuration.\n", + val); + val = 0; + if (hs_phy_type != GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED) { + if (hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI || + hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI) + val = DWC2_PHY_TYPE_PARAM_UTMI; + else + val = DWC2_PHY_TYPE_PARAM_ULPI; + } + dev_dbg(hsotg->dev, "Setting phy_type to %d\n", val); + retval = -EINVAL; + } +#endif + + hsotg->core_params->phy_type = val; + return retval; +} + +static int dwc2_get_param_phy_type(struct dwc2_hsotg *hsotg) +{ + return hsotg->core_params->phy_type; +} + +int dwc2_set_param_speed(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + int retval = 0; + + if (DWC2_PARAM_TEST(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, "Wrong value for speed parameter\n"); + dev_err(hsotg->dev, "max_speed parameter must be 0 or 1\n"); + } + valid = 0; + } + + if (val == 0 && dwc2_get_param_phy_type(hsotg) == + DWC2_PHY_TYPE_PARAM_FS) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for speed parameter. Check HW configuration.\n", + val); + val = dwc2_get_param_phy_type(hsotg) == DWC2_PHY_TYPE_PARAM_FS ? + 1 : 0; + dev_dbg(hsotg->dev, "Setting speed to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->speed = val; + return retval; +} + +int dwc2_set_param_host_ls_low_power_phy_clk(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + int retval = 0; + + if (DWC2_PARAM_TEST(val, DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ, + DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ)) { + if (val >= 0) { + dev_err(hsotg->dev, + "Wrong value for host_ls_low_power_phy_clk parameter\n"); + dev_err(hsotg->dev, + "host_ls_low_power_phy_clk must be 0 or 1\n"); + } + valid = 0; + } + + if (val == DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ && + dwc2_get_param_phy_type(hsotg) == DWC2_PHY_TYPE_PARAM_FS) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for host_ls_low_power_phy_clk. Check HW configuration.\n", + val); + val = dwc2_get_param_phy_type(hsotg) == DWC2_PHY_TYPE_PARAM_FS + ? DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ + : DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ; + dev_dbg(hsotg->dev, "Setting host_ls_low_power_phy_clk to %d\n", + val); + retval = -EINVAL; + } + + hsotg->core_params->host_ls_low_power_phy_clk = val; + return retval; +} + +int dwc2_set_param_phy_ulpi_ddr(struct dwc2_hsotg *hsotg, int val) +{ + int retval = 0; + + if (DWC2_PARAM_TEST(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, "Wrong value for phy_ulpi_ddr\n"); + dev_err(hsotg->dev, "phy_upli_ddr must be 0 or 1\n"); + } + val = 0; + dev_dbg(hsotg->dev, "Setting phy_upli_ddr to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->phy_ulpi_ddr = val; + return retval; +} + +int dwc2_set_param_phy_ulpi_ext_vbus(struct dwc2_hsotg *hsotg, int val) +{ + int retval = 0; + + if (DWC2_PARAM_TEST(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, + "Wrong value for phy_ulpi_ext_vbus\n"); + dev_err(hsotg->dev, + "phy_ulpi_ext_vbus must be 0 or 1\n"); + } + val = 0; + dev_dbg(hsotg->dev, "Setting phy_ulpi_ext_vbus to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->phy_ulpi_ext_vbus = val; + return retval; +} + +int dwc2_set_param_phy_utmi_width(struct dwc2_hsotg *hsotg, int val) +{ + int retval = 0; + + if (DWC2_PARAM_TEST(val, 8, 8) && DWC2_PARAM_TEST(val, 16, 16)) { + if (val >= 0) { + dev_err(hsotg->dev, "Wrong value for phy_utmi_width\n"); + dev_err(hsotg->dev, "phy_utmi_width must be 8 or 16\n"); + } + val = 8; + dev_dbg(hsotg->dev, "Setting phy_utmi_width to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->phy_utmi_width = val; + return retval; +} + +int dwc2_set_param_ulpi_fs_ls(struct dwc2_hsotg *hsotg, int val) +{ + int retval = 0; + + if (DWC2_PARAM_TEST(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, "Wrong value for ulpi_fs_ls\n"); + dev_err(hsotg->dev, "ulpi_fs_ls must be 0 or 1\n"); + } + val = 0; + dev_dbg(hsotg->dev, "Setting ulpi_fs_ls to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->ulpi_fs_ls = val; + return retval; +} + +int dwc2_set_param_ts_dline(struct dwc2_hsotg *hsotg, int val) +{ + int retval = 0; + + if (DWC2_PARAM_TEST(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, "Wrong value for ts_dline\n"); + dev_err(hsotg->dev, "ts_dline must be 0 or 1\n"); + } + val = 0; + dev_dbg(hsotg->dev, "Setting ts_dline to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->ts_dline = val; + return retval; +} + +int dwc2_set_param_i2c_enable(struct dwc2_hsotg *hsotg, int val) +{ +#ifndef NO_FS_PHY_HW_CHECKS + int valid = 1; +#endif + int retval = 0; + + if (DWC2_PARAM_TEST(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, "Wrong value for i2c_enable\n"); + dev_err(hsotg->dev, "i2c_enable must be 0 or 1\n"); + } + +#ifndef NO_FS_PHY_HW_CHECKS + valid = 0; +#else + val = 0; + dev_dbg(hsotg->dev, "Setting i2c_enable to %d\n", val); + retval = -EINVAL; +#endif + } + +#ifndef NO_FS_PHY_HW_CHECKS + if (val == 1 && !(hsotg->hwcfg3 & GHWCFG3_I2C)) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for i2c_enable. Check HW configuration.\n", + val); + val = !!(hsotg->hwcfg3 & GHWCFG3_I2C); + dev_dbg(hsotg->dev, "Setting i2c_enable to %d\n", val); + retval = -EINVAL; + } +#endif + + hsotg->core_params->i2c_enable = val; + return retval; +} + +int dwc2_set_param_en_multiple_tx_fifo(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + int retval = 0; + + if (DWC2_PARAM_TEST(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, + "Wrong value for en_multiple_tx_fifo,\n"); + dev_err(hsotg->dev, + "en_multiple_tx_fifo must be 0 or 1\n"); + } + valid = 0; + } + + if (val == 1 && !(hsotg->hwcfg4 & GHWCFG4_DED_FIFO_EN)) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for parameter en_multiple_tx_fifo. Check HW configuration.\n", + val); + val = !!(hsotg->hwcfg4 & GHWCFG4_DED_FIFO_EN); + dev_dbg(hsotg->dev, "Setting en_multiple_tx_fifo to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->en_multiple_tx_fifo = val; + return retval; +} + +int dwc2_set_param_reload_ctl(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + int retval = 0; + + if (DWC2_PARAM_TEST(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, + "'%d' invalid for parameter reload_ctl\n", val); + dev_err(hsotg->dev, "reload_ctl must be 0 or 1\n"); + } + valid = 0; + } + + if (val == 1 && hsotg->snpsid < DWC2_CORE_REV_2_92a) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for parameter reload_ctl. Check HW configuration.\n", + val); + val = hsotg->snpsid >= DWC2_CORE_REV_2_92a; + dev_dbg(hsotg->dev, "Setting reload_ctl to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->reload_ctl = val; + return retval; +} + +int dwc2_set_param_ahb_single(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + int retval = 0; + + if (DWC2_PARAM_TEST(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, + "'%d' invalid for parameter ahb_single\n", val); + dev_err(hsotg->dev, "ahb_single must be 0 or 1\n"); + } + valid = 0; + } + + if (val > 0 && hsotg->snpsid < DWC2_CORE_REV_2_94a) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for parameter ahb_single. Check HW configuration.\n", + val); + val = 0; + dev_dbg(hsotg->dev, "Setting ahb_single to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->ahb_single = val; + return retval; +} + +int dwc2_set_param_otg_ver(struct dwc2_hsotg *hsotg, int val) +{ + int retval = 0; + + if (DWC2_PARAM_TEST(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, + "'%d' invalid for parameter otg_ver\n", val); + dev_err(hsotg->dev, + "otg_ver must be 0 (for OTG 1.3 support) or 1 (for OTG 2.0 support)\n"); + } + val = 0; + dev_dbg(hsotg->dev, "Setting otg_ver to %d\n", val); + retval = -EINVAL; + } + + hsotg->core_params->otg_ver = val; + return retval; +} + +/* + * This function is called during module intialization to pass module parameters + * for the DWC_otg core. It returns non-0 if any parameters are invalid. + */ +int dwc2_set_parameters(struct dwc2_hsotg *hsotg, + struct dwc2_core_params *params) +{ + int retval = 0; + + dev_dbg(hsotg->dev, "%s()\n", __func__); + + retval |= dwc2_set_param_otg_cap(hsotg, params->otg_cap); + retval |= dwc2_set_param_dma_enable(hsotg, params->dma_enable); + retval |= dwc2_set_param_dma_desc_enable(hsotg, + params->dma_desc_enable); + retval |= dwc2_set_param_host_support_fs_ls_low_power(hsotg, + params->host_support_fs_ls_low_power); + retval |= dwc2_set_param_enable_dynamic_fifo(hsotg, + params->enable_dynamic_fifo); + retval |= dwc2_set_param_host_rx_fifo_size(hsotg, + params->host_rx_fifo_size); + retval |= dwc2_set_param_host_nperio_tx_fifo_size(hsotg, + params->host_nperio_tx_fifo_size); + retval |= dwc2_set_param_host_perio_tx_fifo_size(hsotg, + params->host_perio_tx_fifo_size); + retval |= dwc2_set_param_max_transfer_size(hsotg, + params->max_transfer_size); + retval |= dwc2_set_param_max_packet_count(hsotg, + params->max_packet_count); + retval |= dwc2_set_param_host_channels(hsotg, params->host_channels); + retval |= dwc2_set_param_phy_type(hsotg, params->phy_type); + retval |= dwc2_set_param_speed(hsotg, params->speed); + retval |= dwc2_set_param_host_ls_low_power_phy_clk(hsotg, + params->host_ls_low_power_phy_clk); + retval |= dwc2_set_param_phy_ulpi_ddr(hsotg, params->phy_ulpi_ddr); + retval |= dwc2_set_param_phy_ulpi_ext_vbus(hsotg, + params->phy_ulpi_ext_vbus); + retval |= dwc2_set_param_phy_utmi_width(hsotg, params->phy_utmi_width); + retval |= dwc2_set_param_ulpi_fs_ls(hsotg, params->ulpi_fs_ls); + retval |= dwc2_set_param_ts_dline(hsotg, params->ts_dline); + retval |= dwc2_set_param_i2c_enable(hsotg, params->i2c_enable); + retval |= dwc2_set_param_en_multiple_tx_fifo(hsotg, + params->en_multiple_tx_fifo); + retval |= dwc2_set_param_reload_ctl(hsotg, params->reload_ctl); + retval |= dwc2_set_param_ahb_single(hsotg, params->ahb_single); + retval |= dwc2_set_param_otg_ver(hsotg, params->otg_ver); + + return retval; +} + +u16 dwc2_get_otg_version(struct dwc2_hsotg *hsotg) +{ + return (u16)(hsotg->core_params->otg_ver == 1 ? 0x0200 : 0x0103); +} + +int dwc2_check_core_status(struct dwc2_hsotg *hsotg) +{ + if (readl(hsotg->regs + GSNPSID) == 0xffffffff) + return -1; + else + return 0; +} + +/** + * dwc2_enable_global_interrupts() - Enables the controller's Global + * Interrupt in the AHB Config register + * + * @hsotg: Programming view of DWC_otg controller + */ +void dwc2_enable_global_interrupts(struct dwc2_hsotg *hsotg) +{ + u32 ahbcfg = readl(hsotg->regs + GAHBCFG); + + ahbcfg |= GAHBCFG_GLBL_INTR_EN; + writel(ahbcfg, hsotg->regs + GAHBCFG); +} + +/** + * dwc2_disable_global_interrupts() - Disables the controller's Global + * Interrupt in the AHB Config register + * + * @hsotg: Programming view of DWC_otg controller + */ +void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg) +{ + u32 ahbcfg = readl(hsotg->regs + GAHBCFG); + + ahbcfg &= ~GAHBCFG_GLBL_INTR_EN; + writel(ahbcfg, hsotg->regs + GAHBCFG); +} + +MODULE_DESCRIPTION("DESIGNWARE HS OTG Core"); +MODULE_AUTHOR("Synopsys, Inc."); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/staging/dwc2/core.h b/drivers/staging/dwc2/core.h new file mode 100644 index 0000000..f8ee04b --- /dev/null +++ b/drivers/staging/dwc2/core.h @@ -0,0 +1,658 @@ +/* + * core.h - DesignWare HS OTG Controller common declarations + * + * Copyright (C) 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __DWC2_CORE_H__ +#define __DWC2_CORE_H__ + +#include <linux/usb/phy.h> +#include "hw.h" + +#ifdef DWC2_LOG_WRITES +static inline void do_write(u32 value, void *addr) +{ + writel(value, addr); + pr_info("INFO:: wrote %08x to %p\n", value, addr); +} + +#undef writel +#define writel(v, a) do_write(v, a) +#endif + +/* Maximum number of Endpoints/HostChannels */ +#define MAX_EPS_CHANNELS 16 + +struct dwc2_hsotg; +struct dwc2_host_chan; + +/* Device States */ +enum dwc2_lx_state { + DWC2_L0, /* On state */ + DWC2_L1, /* LPM sleep state */ + DWC2_L2, /* USB suspend state */ + DWC2_L3, /* Off state */ +}; + +/** + * struct dwc2_core_params - Parameters for configuring the core + * + * @otg_cap: Specifies the OTG capabilities. The driver will + * automatically detect the value for this parameter if + * none is specified. + * 0 - HNP and SRP capable (default) + * 1 - SRP Only capable + * 2 - No HNP/SRP capable + * @dma_enable: Specifies whether to use slave or DMA mode for accessing + * the data FIFOs. The driver will automatically detect the + * value for this parameter if none is specified. + * 0 - Slave + * 1 - DMA (default, if available) + * @dma_desc_enable: When DMA mode is enabled, specifies whether to use + * address DMA mode or descriptor DMA mode for accessing + * the data FIFOs. The driver will automatically detect the + * value for this if none is specified. + * 0 - Address DMA + * 1 - Descriptor DMA (default, if available) + * @speed: Specifies the maximum speed of operation in host and + * device mode. The actual speed depends on the speed of + * the attached device and the value of phy_type. + * 0 - High Speed (default) + * 1 - Full Speed + * @host_support_fs_ls_low_power: Specifies whether low power mode is supported + * when attached to a Full Speed or Low Speed device in + * host mode. + * 0 - Don't support low power mode (default) + * 1 - Support low power mode + * @host_ls_low_power_phy_clk: Specifies the PHY clock rate in low power mode + * when connected to a Low Speed device in host mode. This + * parameter is applicable only if + * host_support_fs_ls_low_power is enabled. If phy_type is + * set to FS then defaults to 6 MHZ otherwise 48 MHZ. + * 0 - 48 MHz + * 1 - 6 MHz + * @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters + * 1 - Allow dynamic FIFO sizing (default) + * @host_rx_fifo_size: Number of 4-byte words in the Rx FIFO in host mode when + * dynamic FIFO sizing is enabled + * 16 to 32768 (default 1024) + * @host_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO + * in host mode when dynamic FIFO sizing is enabled + * 16 to 32768 (default 1024) + * @host_perio_tx_fifo_size: Number of 4-byte words in the periodic Tx FIFO in + * host mode when dynamic FIFO sizing is enabled + * 16 to 32768 (default 1024) + * @max_transfer_size: The maximum transfer size supported, in bytes + * 2047 to 65,535 (default 65,535) + * @max_packet_count: The maximum number of packets in a transfer + * 15 to 511 (default 511) + * @host_channels: The number of host channel registers to use + * 1 to 16 (default 12) + * @phy_type: Specifies the type of PHY interface to use. By default, + * the driver will automatically detect the phy_type. + * @phy_utmi_width: Specifies the UTMI+ Data Width (in bits). This parameter + * is applicable for a phy_type of UTMI+ or ULPI. (For a + * ULPI phy_type, this parameter indicates the data width + * between the MAC and the ULPI Wrapper.) Also, this + * parameter is applicable only if the OTG_HSPHY_WIDTH cC + * parameter was set to "8 and 16 bits", meaning that the + * core has been configured to work at either data path + * width. + * 8 or 16 (default 16) + * @phy_ulpi_ddr: Specifies whether the ULPI operates at double or single + * data rate. This parameter is only applicable if phy_type + * is ULPI. + * 0 - single data rate ULPI interface with 8 bit wide + * data bus (default) + * 1 - double data rate ULPI interface with 4 bit wide + * data bus + * @phy_ulpi_ext_vbus: For a ULPI phy, specifies whether to use the internal or + * external supply to drive the VBus + * @i2c_enable: Specifies whether to use the I2Cinterface for a full + * speed PHY. This parameter is only applicable if phy_type + * is FS. + * 0 - No (default) + * 1 - Yes + * @ulpi_fs_ls: True to make ULPI phy operate in FS/LS mode only + * @ts_dline: True to enable Term Select Dline pulsing + * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs + * are enabled + * @reload_ctl: True to allow dynamic reloading of HFIR register during + * runtime + * @ahb_single: This bit enables SINGLE transfers for remainder data in + * a transfer for DMA mode of operation. + * 0 - remainder data will be sent using INCR burst size + * 1 - remainder data will be sent using SINGLE burst size + * @otg_ver: OTG version supported + * 0 - 1.3 + * 1 - 2.0 + * + * The following parameters may be specified when starting the module. These + * parameters define how the DWC_otg controller should be configured. + */ +struct dwc2_core_params { + int otg_cap; + int otg_ver; + int dma_enable; + int dma_desc_enable; + int speed; + int enable_dynamic_fifo; + int en_multiple_tx_fifo; + int host_rx_fifo_size; + int host_nperio_tx_fifo_size; + int host_perio_tx_fifo_size; + int max_transfer_size; + int max_packet_count; + int host_channels; + int phy_type; + int phy_utmi_width; + int phy_ulpi_ddr; + int phy_ulpi_ext_vbus; + int i2c_enable; + int ulpi_fs_ls; + int host_support_fs_ls_low_power; + int host_ls_low_power_phy_clk; + int ts_dline; + int reload_ctl; + int ahb_single; +}; + +/** + * struct dwc2_hsotg - Holds the state of the driver, including the non-periodic + * and periodic schedules + * + * @dev: The struct device pointer + * @regs: Pointer to controller regs + * @core_params: Parameters that define how the core should be configured + * @hwcfg1: Hardware Configuration - stored here for convenience + * @hwcfg2: Hardware Configuration - stored here for convenience + * @hwcfg3: Hardware Configuration - stored here for convenience + * @hwcfg4: Hardware Configuration - stored here for convenience + * @hptxfsiz: Hardware Configuration - stored here for convenience + * @snpsid: Value from SNPSID register + * @total_fifo_size: Total internal RAM for FIFOs (bytes) + * @rx_fifo_size: Size of Rx FIFO (bytes) + * @nperio_tx_fifo_size: Size of Non-periodic Tx FIFO (Bytes) + * @op_state: The operational State, during transitions (a_host=> + * a_peripheral and b_device=>b_host) this may not match + * the core, but allows the software to determine + * transitions + * @queuing_high_bandwidth: True if multiple packets of a high-bandwidth + * transfer are in process of being queued + * @srp_success: Stores status of SRP request in the case of a FS PHY + * with an I2C interface + * @wq_otg: Workqueue object used for handling of some interrupts + * @wf_otg: Work object for handling Connector ID Status Change + * interrupt + * @wkp_timer: Timer object for handling Wakeup Detected interrupt + * @lx_state: Lx state of connected device + * @flags: Flags for handling root port state changes + * @non_periodic_sched_inactive: Inactive QHs in the non-periodic schedule. + * Transfers associated with these QHs are not currently + * assigned to a host channel. + * @non_periodic_sched_active: Active QHs in the non-periodic schedule. + * Transfers associated with these QHs are currently + * assigned to a host channel. + * @non_periodic_qh_ptr: Pointer to next QH to process in the active + * non-periodic schedule + * @periodic_sched_inactive: Inactive QHs in the periodic schedule. This is a + * list of QHs for periodic transfers that are _not_ + * scheduled for the next frame. Each QH in the list has an + * interval counter that determines when it needs to be + * scheduled for execution. This scheduling mechanism + * allows only a simple calculation for periodic bandwidth + * used (i.e. must assume that all periodic transfers may + * need to execute in the same frame). However, it greatly + * simplifies scheduling and should be sufficient for the + * vast majority of OTG hosts, which need to connect to a + * small number of peripherals at one time. Items move from + * this list to periodic_sched_ready when the QH interval + * counter is 0 at SOF. + * @periodic_sched_ready: List of periodic QHs that are ready for execution in + * the next frame, but have not yet been assigned to host + * channels. Items move from this list to + * periodic_sched_assigned as host channels become + * available during the current frame. + * @periodic_sched_assigned: List of periodic QHs to be executed in the next + * frame that are assigned to host channels. Items move + * from this list to periodic_sched_queued as the + * transactions for the QH are queued to the DWC_otg + * controller. + * @periodic_sched_queued: List of periodic QHs that have been queued for + * execution. Items move from this list to either + * periodic_sched_inactive or periodic_sched_ready when the + * channel associated with the transfer is released. If the + * interval for the QH is 1, the item moves to + * periodic_sched_ready because it must be rescheduled for + * the next frame. Otherwise, the item moves to + * periodic_sched_inactive. + * @periodic_usecs: Total bandwidth claimed so far for periodic transfers. + * This value is in microseconds per (micro)frame. The + * assumption is that all periodic transfers may occur in + * the same (micro)frame. + * @frame_number: Frame number read from the core at SOF. The value ranges + * from 0 to HFNUM_MAX_FRNUM. + * @periodic_qh_count: Count of periodic QHs, if using several eps. Used for + * SOF enable/disable. + * @free_hc_list: Free host channels in the controller. This is a list of + * struct dwc2_host_chan items. + * @periodic_channels: Number of host channels assigned to periodic transfers. + * Currently assuming that there is a dedicated host + * channel for each periodic transaction and at least one + * host channel is available for non-periodic transactions. + * @non_periodic_channels: Number of host channels assigned to non-periodic + * transfers + * @hc_ptr_array: Array of pointers to the host channel descriptors. + * Allows accessing a host channel descriptor given the + * host channel number. This is useful in interrupt + * handlers. + * @status_buf: Buffer used for data received during the status phase of + * a control transfer. + * @status_buf_dma: DMA address for status_buf + * @start_work: Delayed work for handling host A-cable connection + * @reset_work: Delayed work for handling a port reset + * @lock: Spinlock that protects all the driver data structures + * @priv: Stores a pointer to the struct usb_hcd + * @otg_port: OTG port number + * @frame_list: Frame list + * @frame_list_dma: Frame list DMA address + */ +struct dwc2_hsotg { + struct device *dev; + void __iomem *regs; + struct dwc2_core_params *core_params; + u32 hwcfg1; + u32 hwcfg2; + u32 hwcfg3; + u32 hwcfg4; + u32 hptxfsiz; + u32 snpsid; + u16 total_fifo_size; + u16 rx_fifo_size; + u16 nperio_tx_fifo_size; + enum usb_otg_state op_state; + + unsigned int queuing_high_bandwidth:1; + unsigned int srp_success:1; + + struct workqueue_struct *wq_otg; + struct work_struct wf_otg; + struct timer_list wkp_timer; + enum dwc2_lx_state lx_state; + + union dwc2_hcd_internal_flags { + u32 d32; + struct { + unsigned port_connect_status_change:1; + unsigned port_connect_status:1; + unsigned port_reset_change:1; + unsigned port_enable_change:1; + unsigned port_suspend_change:1; + unsigned port_over_current_change:1; + unsigned port_l1_change:1; + unsigned reserved:26; + } b; + } flags; + + struct list_head non_periodic_sched_inactive; + struct list_head non_periodic_sched_active; + struct list_head *non_periodic_qh_ptr; + struct list_head periodic_sched_inactive; + struct list_head periodic_sched_ready; + struct list_head periodic_sched_assigned; + struct list_head periodic_sched_queued; + u16 periodic_usecs; + u16 frame_number; + u16 periodic_qh_count; + +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS +#define FRAME_NUM_ARRAY_SIZE 1000 + u16 last_frame_num; + u16 *frame_num_array; + u16 *last_frame_num_array; + int frame_num_idx; + int dumped_frame_num_array; +#endif + + struct list_head free_hc_list; + int periodic_channels; + int non_periodic_channels; + struct dwc2_host_chan *hc_ptr_array[MAX_EPS_CHANNELS]; + u8 *status_buf; + dma_addr_t status_buf_dma; +#define DWC2_HCD_STATUS_BUF_SIZE 64 + + struct delayed_work start_work; + struct delayed_work reset_work; + spinlock_t lock; + void *priv; + u8 otg_port; + u32 *frame_list; + dma_addr_t frame_list_dma; + + /* DWC OTG HW Release versions */ +#define DWC2_CORE_REV_2_71a 0x4f54271a +#define DWC2_CORE_REV_2_90a 0x4f54290a +#define DWC2_CORE_REV_2_92a 0x4f54292a +#define DWC2_CORE_REV_2_94a 0x4f54294a +#define DWC2_CORE_REV_3_00a 0x4f54300a + +#ifdef DEBUG + u32 frrem_samples; + u64 frrem_accum; + + u32 hfnum_7_samples_a; + u64 hfnum_7_frrem_accum_a; + u32 hfnum_0_samples_a; + u64 hfnum_0_frrem_accum_a; + u32 hfnum_other_samples_a; + u64 hfnum_other_frrem_accum_a; + + u32 hfnum_7_samples_b; + u64 hfnum_7_frrem_accum_b; + u32 hfnum_0_samples_b; + u64 hfnum_0_frrem_accum_b; + u32 hfnum_other_samples_b; + u64 hfnum_other_frrem_accum_b; +#endif +}; + +/* Reasons for halting a host channel */ +enum dwc2_halt_status { + DWC2_HC_XFER_NO_HALT_STATUS, + DWC2_HC_XFER_COMPLETE, + DWC2_HC_XFER_URB_COMPLETE, + DWC2_HC_XFER_ACK, + DWC2_HC_XFER_NAK, + DWC2_HC_XFER_NYET, + DWC2_HC_XFER_STALL, + DWC2_HC_XFER_XACT_ERR, + DWC2_HC_XFER_FRAME_OVERRUN, + DWC2_HC_XFER_BABBLE_ERR, + DWC2_HC_XFER_DATA_TOGGLE_ERR, + DWC2_HC_XFER_AHB_ERR, + DWC2_HC_XFER_PERIODIC_INCOMPLETE, + DWC2_HC_XFER_URB_DEQUEUE, +}; + +/* + * The following functions support initialization of the core driver component + * and the DWC_otg controller + */ +extern void dwc2_core_host_init(struct dwc2_hsotg *hsotg); + +/* + * Host core Functions. + * The following functions support managing the DWC_otg controller in host + * mode. + */ +extern void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan); +extern void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan, + enum dwc2_halt_status halt_status); +extern void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); +extern void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); +extern void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); +extern int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); +extern void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); +extern void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg); +extern void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg); + +extern u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg); +extern int dwc2_check_core_status(struct dwc2_hsotg *hsotg); + +/* + * Common core Functions. + * The following functions support managing the DWC_otg controller in either + * device or host mode. + */ +extern void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes); +extern void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num); +extern void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg); + +extern int dwc2_core_init(struct dwc2_hsotg *hsotg, bool select_phy); +extern void dwc2_enable_global_interrupts(struct dwc2_hsotg *hcd); +extern void dwc2_disable_global_interrupts(struct dwc2_hsotg *hcd); + +/* This function should be called on every hardware interrupt. */ +extern irqreturn_t dwc2_handle_common_intr(int irq, void *dev); + +/* OTG Core Parameters */ + +/* + * Specifies the OTG capabilities. The driver will automatically + * detect the value for this parameter if none is specified. + * 0 - HNP and SRP capable (default) + * 1 - SRP Only capable + * 2 - No HNP/SRP capable + */ +extern int dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg, int val); +#define DWC2_CAP_PARAM_HNP_SRP_CAPABLE 0 +#define DWC2_CAP_PARAM_SRP_ONLY_CAPABLE 1 +#define DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 + +/* + * Specifies whether to use slave or DMA mode for accessing the data + * FIFOs. The driver will automatically detect the value for this + * parameter if none is specified. + * 0 - Slave + * 1 - DMA (default, if available) + */ +extern int dwc2_set_param_dma_enable(struct dwc2_hsotg *hsotg, int val); + +/* + * When DMA mode is enabled specifies whether to use + * address DMA or DMA Descritor mode for accessing the data + * FIFOs in device mode. The driver will automatically detect + * the value for this parameter if none is specified. + * 0 - address DMA + * 1 - DMA Descriptor(default, if available) + */ +extern int dwc2_set_param_dma_desc_enable(struct dwc2_hsotg *hsotg, int val); + +/* + * Specifies the maximum speed of operation in host and device mode. + * The actual speed depends on the speed of the attached device and + * the value of phy_type. The actual speed depends on the speed of the + * attached device. + * 0 - High Speed (default) + * 1 - Full Speed + */ +extern int dwc2_set_param_speed(struct dwc2_hsotg *hsotg, int val); +#define DWC2_SPEED_PARAM_HIGH 0 +#define DWC2_SPEED_PARAM_FULL 1 + +/* + * Specifies whether low power mode is supported when attached + * to a Full Speed or Low Speed device in host mode. + * + * 0 - Don't support low power mode (default) + * 1 - Support low power mode + */ +extern int dwc2_set_param_host_support_fs_ls_low_power(struct dwc2_hsotg *hsotg, + int val); + +/* + * Specifies the PHY clock rate in low power mode when connected to a + * Low Speed device in host mode. This parameter is applicable only if + * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS + * then defaults to 6 MHZ otherwise 48 MHZ. + * + * 0 - 48 MHz + * 1 - 6 MHz + */ +extern int dwc2_set_param_host_ls_low_power_phy_clk(struct dwc2_hsotg *hsotg, + int val); +#define DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0 +#define DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1 + +/* + * 0 - Use cC FIFO size parameters + * 1 - Allow dynamic FIFO sizing (default) + */ +extern int dwc2_set_param_enable_dynamic_fifo(struct dwc2_hsotg *hsotg, + int val); + +/* + * Number of 4-byte words in the Rx FIFO in host mode when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 1024) + */ +extern int dwc2_set_param_host_rx_fifo_size(struct dwc2_hsotg *hsotg, int val); + +/* + * Number of 4-byte words in the non-periodic Tx FIFO in host mode + * when Dynamic FIFO sizing is enabled in the core. + * 16 to 32768 (default 256) + */ +extern int dwc2_set_param_host_nperio_tx_fifo_size(struct dwc2_hsotg *hsotg, + int val); + +/* + * Number of 4-byte words in the host periodic Tx FIFO when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 256) + */ +extern int dwc2_set_param_host_perio_tx_fifo_size(struct dwc2_hsotg *hsotg, + int val); + +/* + * The maximum transfer size supported in bytes. + * 2047 to 65,535 (default 65,535) + */ +extern int dwc2_set_param_max_transfer_size(struct dwc2_hsotg *hsotg, int val); + +/* + * The maximum number of packets in a transfer. + * 15 to 511 (default 511) + */ +extern int dwc2_set_param_max_packet_count(struct dwc2_hsotg *hsotg, int val); + +/* + * The number of host channel registers to use. + * 1 to 16 (default 11) + * Note: The FPGA configuration supports a maximum of 11 host channels. + */ +extern int dwc2_set_param_host_channels(struct dwc2_hsotg *hsotg, int val); + +/* + * Specifies the type of PHY interface to use. By default, the driver + * will automatically detect the phy_type. + * + * 0 - Full Speed PHY + * 1 - UTMI+ (default) + * 2 - ULPI + */ +extern int dwc2_set_param_phy_type(struct dwc2_hsotg *hsotg, int val); +#define DWC2_PHY_TYPE_PARAM_FS 0 +#define DWC2_PHY_TYPE_PARAM_UTMI 1 +#define DWC2_PHY_TYPE_PARAM_ULPI 2 + +/* + * Specifies the UTMI+ Data Width. This parameter is + * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI + * PHY_TYPE, this parameter indicates the data width between + * the MAC and the ULPI Wrapper.) Also, this parameter is + * applicable only if the OTG_HSPHY_WIDTH cC parameter was set + * to "8 and 16 bits", meaning that the core has been + * configured to work at either data path width. + * + * 8 or 16 bits (default 16) + */ +extern int dwc2_set_param_phy_utmi_width(struct dwc2_hsotg *hsotg, int val); + +/* + * Specifies whether the ULPI operates at double or single + * data rate. This parameter is only applicable if PHY_TYPE is + * ULPI. + * + * 0 - single data rate ULPI interface with 8 bit wide data + * bus (default) + * 1 - double data rate ULPI interface with 4 bit wide data + * bus + */ +extern int dwc2_set_param_phy_ulpi_ddr(struct dwc2_hsotg *hsotg, int val); + +/* + * Specifies whether to use the internal or external supply to + * drive the vbus with a ULPI phy. + */ +extern int dwc2_set_param_phy_ulpi_ext_vbus(struct dwc2_hsotg *hsotg, int val); +#define DWC2_PHY_ULPI_INTERNAL_VBUS 0 +#define DWC2_PHY_ULPI_EXTERNAL_VBUS 1 + +/* + * Specifies whether to use the I2Cinterface for full speed PHY. This + * parameter is only applicable if PHY_TYPE is FS. + * 0 - No (default) + * 1 - Yes + */ +extern int dwc2_set_param_i2c_enable(struct dwc2_hsotg *hsotg, int val); + +extern int dwc2_set_param_ulpi_fs_ls(struct dwc2_hsotg *hsotg, int val); + +extern int dwc2_set_param_ts_dline(struct dwc2_hsotg *hsotg, int val); + +/* + * Specifies whether dedicated transmit FIFOs are + * enabled for non periodic IN endpoints in device mode + * 0 - No + * 1 - Yes + */ +extern int dwc2_set_param_en_multiple_tx_fifo(struct dwc2_hsotg *hsotg, + int val); + +extern int dwc2_set_param_reload_ctl(struct dwc2_hsotg *hsotg, int val); + +extern int dwc2_set_param_ahb_single(struct dwc2_hsotg *hsotg, int val); + +extern int dwc2_set_param_otg_ver(struct dwc2_hsotg *hsotg, int val); + +/* + * Dump core registers and SPRAM + */ +extern void dwc2_dump_dev_registers(struct dwc2_hsotg *hsotg); +extern void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg); +extern void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg); + +/* + * Return OTG version - either 1.3 or 2.0 + */ +extern u16 dwc2_get_otg_version(struct dwc2_hsotg *hsotg); + +#endif /* __DWC2_CORE_H__ */ diff --git a/drivers/staging/dwc2/core_intr.c b/drivers/staging/dwc2/core_intr.c new file mode 100644 index 0000000..44c0166 --- /dev/null +++ b/drivers/staging/dwc2/core_intr.c @@ -0,0 +1,505 @@ +/* + * core_intr.c - DesignWare HS OTG Controller common interrupt handling + * + * Copyright (C) 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * This file contains the common interrupt handlers + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> + +#include "core.h" +#include "hcd.h" + +static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg) +{ +#ifdef DEBUG + switch (hsotg->op_state) { + case OTG_STATE_A_HOST: + return "a_host"; + case OTG_STATE_A_SUSPEND: + return "a_suspend"; + case OTG_STATE_A_PERIPHERAL: + return "a_peripheral"; + case OTG_STATE_B_PERIPHERAL: + return "b_peripheral"; + case OTG_STATE_B_HOST: + return "b_host"; + default: + return "unknown"; + } +#else + return ""; +#endif +} + +/** + * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg) +{ + dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device"); + + /* Clear interrupt */ + writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS); +} + +/** + * dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG + * Interrupt Register (GOTGINT) to determine what interrupt has occurred. + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg) +{ + u32 gotgint; + u32 gotgctl; + u32 gintmsk; + + gotgint = readl(hsotg->regs + GOTGINT); + gotgctl = readl(hsotg->regs + GOTGCTL); + dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint, + dwc2_op_state_str(hsotg)); + + if (gotgint & GOTGINT_SES_END_DET) { + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Session End Detected++ (%s)\n", + dwc2_op_state_str(hsotg)); + gotgctl = readl(hsotg->regs + GOTGCTL); + + if (hsotg->op_state == OTG_STATE_B_HOST) { + hsotg->op_state = OTG_STATE_B_PERIPHERAL; + } else { + /* + * If not B_HOST and Device HNP still set, HNP did + * not succeed! + */ + if (gotgctl & GOTGCTL_DEVHNPEN) { + dev_dbg(hsotg->dev, "Session End Detected\n"); + dev_err(hsotg->dev, + "Device Not Connected/Responding!\n"); + } + + /* + * If Session End Detected the B-Cable has been + * disconnected + */ + /* Reset to a clean state */ + hsotg->lx_state = DWC2_L0; + } + + gotgctl = readl(hsotg->regs + GOTGCTL); + gotgctl &= ~GOTGCTL_DEVHNPEN; + writel(gotgctl, hsotg->regs + GOTGCTL); + } + + if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) { + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Session Request Success Status Change++\n"); + gotgctl = readl(hsotg->regs + GOTGCTL); + if (gotgctl & GOTGCTL_SESREQSCS) { + if (hsotg->core_params->phy_type == + DWC2_PHY_TYPE_PARAM_FS + && hsotg->core_params->i2c_enable > 0) { + hsotg->srp_success = 1; + } else { + /* Clear Session Request */ + gotgctl = readl(hsotg->regs + GOTGCTL); + gotgctl &= ~GOTGCTL_SESREQ; + writel(gotgctl, hsotg->regs + GOTGCTL); + } + } + } + + if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) { + /* + * Print statements during the HNP interrupt handling + * can cause it to fail + */ + gotgctl = readl(hsotg->regs + GOTGCTL); + /* + * WA for 3.00a- HW is not setting cur_mode, even sometimes + * this does not help + */ + if (hsotg->snpsid >= DWC2_CORE_REV_3_00a) + udelay(100); + if (gotgctl & GOTGCTL_HSTNEGSCS) { + if (dwc2_is_host_mode(hsotg)) { + hsotg->op_state = OTG_STATE_B_HOST; + /* + * Need to disable SOF interrupt immediately. + * When switching from device to host, the PCD + * interrupt handler won't handle the interrupt + * if host mode is already set. The HCD + * interrupt handler won't get called if the + * HCD state is HALT. This means that the + * interrupt does not get handled and Linux + * complains loudly. + */ + gintmsk = readl(hsotg->regs + GINTMSK); + gintmsk &= ~GINTSTS_SOF; + writel(gintmsk, hsotg->regs + GINTMSK); + + /* + * Call callback function with spin lock + * released + */ + spin_unlock(&hsotg->lock); + + /* Initialize the Core for Host mode */ + dwc2_hcd_start(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_B_HOST; + } + } else { + gotgctl = readl(hsotg->regs + GOTGCTL); + gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN); + writel(gotgctl, hsotg->regs + GOTGCTL); + dev_dbg(hsotg->dev, "HNP Failed\n"); + dev_err(hsotg->dev, + "Device Not Connected/Responding\n"); + } + } + + if (gotgint & GOTGINT_HST_NEG_DET) { + /* + * The disconnect interrupt is set at the same time as + * Host Negotiation Detected. During the mode switch all + * interrupts are cleared so the disconnect interrupt + * handler will not get executed. + */ + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Host Negotiation Detected++ (%s)\n", + (dwc2_is_host_mode(hsotg) ? "Host" : "Device")); + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n", + hsotg->op_state); + spin_unlock(&hsotg->lock); + dwc2_hcd_disconnect(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_A_PERIPHERAL; + } else { + /* Need to disable SOF interrupt immediately */ + gintmsk = readl(hsotg->regs + GINTMSK); + gintmsk &= ~GINTSTS_SOF; + writel(gintmsk, hsotg->regs + GINTMSK); + spin_unlock(&hsotg->lock); + dwc2_hcd_start(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_A_HOST; + } + } + + if (gotgint & GOTGINT_A_DEV_TOUT_CHG) + dev_dbg(hsotg->dev, + " ++OTG Interrupt: A-Device Timeout Change++\n"); + if (gotgint & GOTGINT_DBNCE_DONE) + dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n"); + + /* Clear GOTGINT */ + writel(gotgint, hsotg->regs + GOTGINT); +} + +/** + * dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status + * Change Interrupt + * + * @hsotg: Programming view of DWC_otg controller + * + * Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a + * Device to Host Mode transition or a Host to Device Mode transition. This only + * occurs when the cable is connected/removed from the PHY connector. + */ +static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) +{ + u32 gintmsk = readl(hsotg->regs + GINTMSK); + + /* Need to disable SOF interrupt immediately */ + gintmsk &= ~GINTSTS_SOF; + writel(gintmsk, hsotg->regs + GINTMSK); + + dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++ (%s)\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device"); + + /* + * Need to schedule a work, as there are possible DELAY function calls. + * Release lock before scheduling workq as it holds spinlock during + * scheduling. + */ + spin_unlock(&hsotg->lock); + queue_work(hsotg->wq_otg, &hsotg->wf_otg); + spin_lock(&hsotg->lock); + + /* Clear interrupt */ + writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS); +} + +/** + * dwc2_handle_session_req_intr() - This interrupt indicates that a device is + * initiating the Session Request Protocol to request the host to turn on bus + * power so a new session can begin + * + * @hsotg: Programming view of DWC_otg controller + * + * This handler responds by turning on bus power. If the DWC_otg controller is + * in low power mode, this handler brings the controller out of low power mode + * before turning on bus power. + */ +static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg) +{ + dev_dbg(hsotg->dev, "++Session Request Interrupt++\n"); + + /* Clear interrupt */ + writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS); +} + +/* + * This interrupt indicates that the DWC_otg controller has detected a + * resume or remote wakeup sequence. If the DWC_otg controller is in + * low power mode, the handler must brings the controller out of low + * power mode. The controller automatically begins resume signaling. + * The handler schedules a time to stop resume signaling. + */ +static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) +{ + dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n"); + dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state); + + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, "DSTS=0x%0x\n", readl(hsotg->regs + DSTS)); + if (hsotg->lx_state == DWC2_L2) { + u32 dctl = readl(hsotg->regs + DCTL); + + /* Clear Remote Wakeup Signaling */ + dctl &= ~DCTL_RMTWKUPSIG; + writel(dctl, hsotg->regs + DCTL); + } + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; + } else { + if (hsotg->lx_state != DWC2_L1) { + u32 pcgcctl = readl(hsotg->regs + PCGCTL); + + /* Restart the Phy Clock */ + pcgcctl &= ~PCGCTL_STOPPCLK; + writel(pcgcctl, hsotg->regs + PCGCTL); + mod_timer(&hsotg->wkp_timer, + jiffies + msecs_to_jiffies(71)); + } else { + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; + } + } + + /* Clear interrupt */ + writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS); +} + +/* + * This interrupt indicates that a device has been disconnected from the + * root port + */ +static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg) +{ + dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device", + dwc2_op_state_str(hsotg)); + + /* Change to L3 (OFF) state */ + hsotg->lx_state = DWC2_L3; + + writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS); +} + +/* + * This interrupt indicates that SUSPEND state has been detected on the USB. + * + * For HNP the USB Suspend interrupt signals the change from "a_peripheral" + * to "a_host". + * + * When power management is enabled the core will be put in low power mode. + */ +static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) +{ + u32 dsts; + + dev_dbg(hsotg->dev, "USB SUSPEND\n"); + + if (dwc2_is_device_mode(hsotg)) { + /* + * Check the Device status register to determine if the Suspend + * state is active + */ + dsts = readl(hsotg->regs + DSTS); + dev_dbg(hsotg->dev, "DSTS=0x%0x\n", dsts); + dev_dbg(hsotg->dev, + "DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d\n", + !!(dsts & DSTS_SUSPSTS), + !!(hsotg->hwcfg4 & GHWCFG4_POWER_OPTIMIZ)); + } else { + if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) { + dev_dbg(hsotg->dev, "a_peripheral->a_host\n"); + + /* Clear the a_peripheral flag, back to a_host */ + spin_unlock(&hsotg->lock); + dwc2_hcd_start(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_A_HOST; + } + } + + /* Change to L2 (suspend) state */ + hsotg->lx_state = DWC2_L2; + + /* Clear interrupt */ + writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS); +} + +#define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \ + GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT | \ + GINTSTS_MODEMIS | GINTSTS_DISCONNINT | \ + GINTSTS_USBSUSP | GINTSTS_RESTOREDONE | \ + GINTSTS_PRTINT) + +/* + * This function returns the Core Interrupt register + */ +static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg) +{ + u32 gintsts; + u32 gintmsk; + u32 gahbcfg; + u32 gintmsk_common = GINTMSK_COMMON; + + gintsts = readl(hsotg->regs + GINTSTS); + gintmsk = readl(hsotg->regs + GINTMSK); + gahbcfg = readl(hsotg->regs + GAHBCFG); + +#ifdef DEBUG + /* If any common interrupts set */ + if (gintsts & gintmsk_common) + dev_dbg(hsotg->dev, "gintsts=%08x gintmsk=%08x\n", + gintsts, gintmsk); +#endif + + if (gahbcfg & GAHBCFG_GLBL_INTR_EN) + return gintsts & gintmsk & gintmsk_common; + else + return 0; +} + +/* + * Common interrupt handler + * + * The common interrupts are those that occur in both Host and Device mode. + * This handler handles the following interrupts: + * - Mode Mismatch Interrupt + * - OTG Interrupt + * - Connector ID Status Change Interrupt + * - Disconnect Interrupt + * - Session Request Interrupt + * - Resume / Remote Wakeup Detected Interrupt + * - Suspend Interrupt + */ +irqreturn_t dwc2_handle_common_intr(int irq, void *dev) +{ + struct dwc2_hsotg *hsotg = dev; + u32 gintsts; + int retval = 0; + + if (dwc2_check_core_status(hsotg) < 0) { + dev_warn(hsotg->dev, "Controller is disconnected"); + goto out; + } + + spin_lock(&hsotg->lock); + + gintsts = dwc2_read_common_intr(hsotg); + if (gintsts & ~GINTSTS_PRTINT) + retval = 1; + + if (gintsts & GINTSTS_MODEMIS) + dwc2_handle_mode_mismatch_intr(hsotg); + if (gintsts & GINTSTS_OTGINT) + dwc2_handle_otg_intr(hsotg); + if (gintsts & GINTSTS_CONIDSTSCHNG) + dwc2_handle_conn_id_status_change_intr(hsotg); + if (gintsts & GINTSTS_DISCONNINT) + dwc2_handle_disconnect_intr(hsotg); + if (gintsts & GINTSTS_SESSREQINT) + dwc2_handle_session_req_intr(hsotg); + if (gintsts & GINTSTS_WKUPINT) + dwc2_handle_wakeup_detected_intr(hsotg); + if (gintsts & GINTSTS_USBSUSP) + dwc2_handle_usb_suspend_intr(hsotg); + + if (gintsts & GINTSTS_RESTOREDONE) { + gintsts = GINTSTS_RESTOREDONE; + writel(gintsts, hsotg->regs + GINTSTS); + dev_dbg(hsotg->dev, " --Restore done interrupt received--\n"); + } + + if (gintsts & GINTSTS_PRTINT) { + /* + * The port interrupt occurs while in device mode with HPRT0 + * Port Enable/Disable + */ + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, + " --Port interrupt received in Device mode--\n"); + gintsts = GINTSTS_PRTINT; + writel(gintsts, hsotg->regs + GINTSTS); + retval = 1; + } + } + + spin_unlock(&hsotg->lock); +out: + return IRQ_RETVAL(retval); +} +EXPORT_SYMBOL_GPL(dwc2_handle_common_intr); diff --git a/drivers/staging/dwc2/hw.h b/drivers/staging/dwc2/hw.h new file mode 100644 index 0000000..382a1d7 --- /dev/null +++ b/drivers/staging/dwc2/hw.h @@ -0,0 +1,811 @@ +/* + * hw.h - DesignWare HS OTG Controller hardware definitions + * + * Copyright 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __DWC2_HW_H__ +#define __DWC2_HW_H__ + +#define HSOTG_REG(x) (x) + +#define GOTGCTL HSOTG_REG(0x000) +#define GOTGCTL_CHIRPEN (1 << 27) +#define GOTGCTL_MULT_VALID_BC_MASK (0x1f << 22) +#define GOTGCTL_MULT_VALID_BC_SHIFT 22 +#define GOTGCTL_OTGVER (1 << 20) +#define GOTGCTL_BSESVLD (1 << 19) +#define GOTGCTL_ASESVLD (1 << 18) +#define GOTGCTL_DBNC_SHORT (1 << 17) +#define GOTGCTL_CONID_B (1 << 16) +#define GOTGCTL_DEVHNPEN (1 << 11) +#define GOTGCTL_HSTSETHNPEN (1 << 10) +#define GOTGCTL_HNPREQ (1 << 9) +#define GOTGCTL_HSTNEGSCS (1 << 8) +#define GOTGCTL_SESREQ (1 << 1) +#define GOTGCTL_SESREQSCS (1 << 0) + +#define GOTGINT HSOTG_REG(0x004) +#define GOTGINT_DBNCE_DONE (1 << 19) +#define GOTGINT_A_DEV_TOUT_CHG (1 << 18) +#define GOTGINT_HST_NEG_DET (1 << 17) +#define GOTGINT_HST_NEG_SUC_STS_CHNG (1 << 9) +#define GOTGINT_SES_REQ_SUC_STS_CHNG (1 << 8) +#define GOTGINT_SES_END_DET (1 << 2) + +#define GAHBCFG HSOTG_REG(0x008) +#define GAHBCFG_AHB_SINGLE (1 << 23) +#define GAHBCFG_NOTI_ALL_DMA_WRIT (1 << 22) +#define GAHBCFG_REM_MEM_SUPP (1 << 21) +#define GAHBCFG_P_TXF_EMP_LVL (1 << 8) +#define GAHBCFG_NP_TXF_EMP_LVL (1 << 7) +#define GAHBCFG_DMA_EN (1 << 5) +#define GAHBCFG_HBSTLEN_MASK (0xf << 1) +#define GAHBCFG_HBSTLEN_SHIFT 1 +#define GAHBCFG_HBSTLEN_SINGLE (0 << 1) +#define GAHBCFG_HBSTLEN_INCR (1 << 1) +#define GAHBCFG_HBSTLEN_INCR4 (3 << 1) +#define GAHBCFG_HBSTLEN_INCR8 (5 << 1) +#define GAHBCFG_HBSTLEN_INCR16 (7 << 1) +#define GAHBCFG_GLBL_INTR_EN (1 << 0) + +#define GUSBCFG HSOTG_REG(0x00C) +#define GUSBCFG_FORCEDEVMODE (1 << 30) +#define GUSBCFG_FORCEHOSTMODE (1 << 29) +#define GUSBCFG_TXENDDELAY (1 << 28) +#define GUSBCFG_ICTRAFFICPULLREMOVE (1 << 27) +#define GUSBCFG_ICUSBCAP (1 << 26) +#define GUSBCFG_ULPI_INT_PROT_DIS (1 << 25) +#define GUSBCFG_INDICATORPASSTHROUGH (1 << 24) +#define GUSBCFG_INDICATORCOMPLEMENT (1 << 23) +#define GUSBCFG_TERMSELDLPULSE (1 << 22) +#define GUSBCFG_ULPI_INT_VBUS_IND (1 << 21) +#define GUSBCFG_ULPI_EXT_VBUS_DRV (1 << 20) +#define GUSBCFG_ULPI_CLK_SUSP_M (1 << 19) +#define GUSBCFG_ULPI_AUTO_RES (1 << 18) +#define GUSBCFG_ULPI_FS_LS (1 << 17) +#define GUSBCFG_OTG_UTMI_FS_SEL (1 << 16) +#define GUSBCFG_PHY_LP_CLK_SEL (1 << 15) +#define GUSBCFG_USBTRDTIM_MASK (0xf << 10) +#define GUSBCFG_USBTRDTIM_SHIFT 10 +#define GUSBCFG_HNPCAP (1 << 9) +#define GUSBCFG_SRPCAP (1 << 8) +#define GUSBCFG_DDRSEL (1 << 7) +#define GUSBCFG_PHYSEL (1 << 6) +#define GUSBCFG_FSINTF (1 << 5) +#define GUSBCFG_ULPI_UTMI_SEL (1 << 4) +#define GUSBCFG_PHYIF16 (1 << 3) +#define GUSBCFG_TOUTCAL_MASK (0x7 << 0) +#define GUSBCFG_TOUTCAL_SHIFT 0 +#define GUSBCFG_TOUTCAL_LIMIT 0x7 +#define GUSBCFG_TOUTCAL(_x) ((_x) << 0) + +#define GRSTCTL HSOTG_REG(0x010) +#define GRSTCTL_AHBIDLE (1 << 31) +#define GRSTCTL_DMAREQ (1 << 30) +#define GRSTCTL_TXFNUM_MASK (0x1f << 6) +#define GRSTCTL_TXFNUM_SHIFT 6 +#define GRSTCTL_TXFNUM_LIMIT 0x1f +#define GRSTCTL_TXFNUM(_x) ((_x) << 6) +#define GRSTCTL_TXFFLSH (1 << 5) +#define GRSTCTL_RXFFLSH (1 << 4) +#define GRSTCTL_IN_TKNQ_FLSH (1 << 3) +#define GRSTCTL_FRMCNTRRST (1 << 2) +#define GRSTCTL_HSFTRST (1 << 1) +#define GRSTCTL_CSFTRST (1 << 0) + +#define GINTSTS HSOTG_REG(0x014) +#define GINTMSK HSOTG_REG(0x018) +#define GINTSTS_WKUPINT (1 << 31) +#define GINTSTS_SESSREQINT (1 << 30) +#define GINTSTS_DISCONNINT (1 << 29) +#define GINTSTS_CONIDSTSCHNG (1 << 28) +#define GINTSTS_LPMTRANRCVD (1 << 27) +#define GINTSTS_PTXFEMP (1 << 26) +#define GINTSTS_HCHINT (1 << 25) +#define GINTSTS_PRTINT (1 << 24) +#define GINTSTS_RESETDET (1 << 23) +#define GINTSTS_FET_SUSP (1 << 22) +#define GINTSTS_INCOMPL_IP (1 << 21) +#define GINTSTS_INCOMPL_SOIN (1 << 20) +#define GINTSTS_OEPINT (1 << 19) +#define GINTSTS_IEPINT (1 << 18) +#define GINTSTS_EPMIS (1 << 17) +#define GINTSTS_RESTOREDONE (1 << 16) +#define GINTSTS_EOPF (1 << 15) +#define GINTSTS_ISOUTDROP (1 << 14) +#define GINTSTS_ENUMDONE (1 << 13) +#define GINTSTS_USBRST (1 << 12) +#define GINTSTS_USBSUSP (1 << 11) +#define GINTSTS_ERLYSUSP (1 << 10) +#define GINTSTS_I2CINT (1 << 9) +#define GINTSTS_ULPI_CK_INT (1 << 8) +#define GINTSTS_GOUTNAKEFF (1 << 7) +#define GINTSTS_GINNAKEFF (1 << 6) +#define GINTSTS_NPTXFEMP (1 << 5) +#define GINTSTS_RXFLVL (1 << 4) +#define GINTSTS_SOF (1 << 3) +#define GINTSTS_OTGINT (1 << 2) +#define GINTSTS_MODEMIS (1 << 1) +#define GINTSTS_CURMODE_HOST (1 << 0) + +#define GRXSTSR HSOTG_REG(0x01C) +#define GRXSTSP HSOTG_REG(0x020) +#define GRXSTS_FN_MASK (0x7f << 25) +#define GRXSTS_FN_SHIFT 25 +#define GRXSTS_PKTSTS_MASK (0xf << 17) +#define GRXSTS_PKTSTS_SHIFT 17 +#define GRXSTS_PKTSTS_GLOBALOUTNAK (1 << 17) +#define GRXSTS_PKTSTS_OUTRX (2 << 17) +#define GRXSTS_PKTSTS_HCHIN (2 << 17) +#define GRXSTS_PKTSTS_OUTDONE (3 << 17) +#define GRXSTS_PKTSTS_HCHIN_XFER_COMP (3 << 17) +#define GRXSTS_PKTSTS_SETUPDONE (4 << 17) +#define GRXSTS_PKTSTS_DATATOGGLEERR (5 << 17) +#define GRXSTS_PKTSTS_SETUPRX (6 << 17) +#define GRXSTS_PKTSTS_HCHHALTED (7 << 17) +#define GRXSTS_HCHNUM_MASK (0xf << 0) +#define GRXSTS_HCHNUM_SHIFT 0 +#define GRXSTS_DPID_MASK (0x3 << 15) +#define GRXSTS_DPID_SHIFT 15 +#define GRXSTS_BYTECNT_MASK (0x7ff << 4) +#define GRXSTS_BYTECNT_SHIFT 4 +#define GRXSTS_EPNUM_MASK (0xf << 0) +#define GRXSTS_EPNUM_SHIFT 0 + +#define GRXFSIZ HSOTG_REG(0x024) + +#define GNPTXFSIZ HSOTG_REG(0x028) +#define GNPTXFSIZ_NP_TXF_DEP_MASK (0xffff << 16) +#define GNPTXFSIZ_NP_TXF_DEP_SHIFT 16 +#define GNPTXFSIZ_NP_TXF_DEP_LIMIT 0xffff +#define GNPTXFSIZ_NP_TXF_DEP(_x) ((_x) << 16) +#define GNPTXFSIZ_NP_TXF_ST_ADDR_MASK (0xffff << 0) +#define GNPTXFSIZ_NP_TXF_ST_ADDR_SHIFT 0 +#define GNPTXFSIZ_NP_TXF_ST_ADDR_LIMIT 0xffff +#define GNPTXFSIZ_NP_TXF_ST_ADDR(_x) ((_x) << 0) + +#define GNPTXSTS HSOTG_REG(0x02C) +#define GNPTXSTS_NP_TXQ_TOP_MASK (0x7f << 24) +#define GNPTXSTS_NP_TXQ_TOP_SHIFT 24 +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_MASK (0xff << 16) +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_SHIFT 16 +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(_v) (((_v) >> 16) & 0xff) +#define GNPTXSTS_NP_TXF_SPC_AVAIL_MASK (0xffff << 0) +#define GNPTXSTS_NP_TXF_SPC_AVAIL_SHIFT 0 +#define GNPTXSTS_NP_TXF_SPC_AVAIL_GET(_v) (((_v) >> 0) & 0xffff) + +#define GI2CCTL HSOTG_REG(0x0030) +#define GI2CCTL_BSYDNE (1 << 31) +#define GI2CCTL_RW (1 << 30) +#define GI2CCTL_I2CDATSE0 (1 << 28) +#define GI2CCTL_I2CDEVADDR_MASK (0x3 << 26) +#define GI2CCTL_I2CDEVADDR_SHIFT 26 +#define GI2CCTL_I2CSUSPCTL (1 << 25) +#define GI2CCTL_ACK (1 << 24) +#define GI2CCTL_I2CEN (1 << 23) +#define GI2CCTL_ADDR_MASK (0x7f << 16) +#define GI2CCTL_ADDR_SHIFT 16 +#define GI2CCTL_REGADDR_MASK (0xff << 8) +#define GI2CCTL_REGADDR_SHIFT 8 +#define GI2CCTL_RWDATA_MASK (0xff << 0) +#define GI2CCTL_RWDATA_SHIFT 0 + +#define GPVNDCTL HSOTG_REG(0x0034) +#define GGPIO HSOTG_REG(0x0038) +#define GUID HSOTG_REG(0x003c) +#define GSNPSID HSOTG_REG(0x0040) +#define GHWCFG1 HSOTG_REG(0x0044) + +#define GHWCFG2 HSOTG_REG(0x0048) +#define GHWCFG2_OTG_ENABLE_IC_USB (1 << 31) +#define GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK (0x1f << 26) +#define GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT 26 +#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK (0x3 << 24) +#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT 24 +#define GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK (0x3 << 22) +#define GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT 22 +#define GHWCFG2_MULTI_PROC_INT (1 << 20) +#define GHWCFG2_DYNAMIC_FIFO (1 << 19) +#define GHWCFG2_PERIO_EP_SUPPORTED (1 << 18) +#define GHWCFG2_NUM_HOST_CHAN_MASK (0xf << 14) +#define GHWCFG2_NUM_HOST_CHAN_SHIFT 14 +#define GHWCFG2_NUM_DEV_EP_MASK (0xf << 10) +#define GHWCFG2_NUM_DEV_EP_SHIFT 10 +#define GHWCFG2_FS_PHY_TYPE_MASK (0x3 << 8) +#define GHWCFG2_FS_PHY_TYPE_SHIFT 8 +#define GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED (0 << 8) +#define GHWCFG2_FS_PHY_TYPE_DEDICATED (1 << 8) +#define GHWCFG2_FS_PHY_TYPE_SHARED_UTMI (2 << 8) +#define GHWCFG2_FS_PHY_TYPE_SHARED_ULPI (3 << 8) +#define GHWCFG2_HS_PHY_TYPE_MASK (0x3 << 6) +#define GHWCFG2_HS_PHY_TYPE_SHIFT 6 +#define GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED (0 << 6) +#define GHWCFG2_HS_PHY_TYPE_UTMI (1 << 6) +#define GHWCFG2_HS_PHY_TYPE_ULPI (2 << 6) +#define GHWCFG2_HS_PHY_TYPE_UTMI_ULPI (3 << 6) +#define GHWCFG2_POINT2POINT (1 << 5) +#define GHWCFG2_ARCHITECTURE_MASK (0x3 << 3) +#define GHWCFG2_ARCHITECTURE_SHIFT 3 +#define GHWCFG2_SLAVE_ONLY_ARCH (0 << 3) +#define GHWCFG2_EXT_DMA_ARCH (1 << 3) +#define GHWCFG2_INT_DMA_ARCH (2 << 3) +#define GHWCFG2_OP_MODE_MASK (0x7 << 0) +#define GHWCFG2_OP_MODE_SHIFT 0 +#define GHWCFG2_OP_MODE_HNP_SRP_CAPABLE (0 << 0) +#define GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE (1 << 0) +#define GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE (2 << 0) +#define GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE (3 << 0) +#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE (4 << 0) +#define GHWCFG2_OP_MODE_SRP_CAPABLE_HOST (5 << 0) +#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST (6 << 0) +#define GHWCFG2_OP_MODE_UNDEFINED (7 << 0) + +#define GHWCFG3 HSOTG_REG(0x004c) +#define GHWCFG3_DFIFO_DEPTH_MASK (0xffff << 16) +#define GHWCFG3_DFIFO_DEPTH_SHIFT 16 +#define GHWCFG3_OTG_LPM_EN (1 << 15) +#define GHWCFG3_BC_SUPPORT (1 << 14) +#define GHWCFG3_OTG_ENABLE_HSIC (1 << 13) +#define GHWCFG3_ADP_SUPP (1 << 12) +#define GHWCFG3_SYNCH_RESET_TYPE (1 << 11) +#define GHWCFG3_OPTIONAL_FEATURES (1 << 10) +#define GHWCFG3_VENDOR_CTRL_IF (1 << 9) +#define GHWCFG3_I2C (1 << 8) +#define GHWCFG3_OTG_FUNC (1 << 7) +#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK (0x7 << 4) +#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT 4 +#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK (0xf << 0) +#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT 0 + +#define GHWCFG4 HSOTG_REG(0x0050) +#define GHWCFG4_DESC_DMA_DYN (1 << 31) +#define GHWCFG4_DESC_DMA (1 << 30) +#define GHWCFG4_NUM_IN_EPS_MASK (0xf << 26) +#define GHWCFG4_NUM_IN_EPS_SHIFT 26 +#define GHWCFG4_DED_FIFO_EN (1 << 25) +#define GHWCFG4_SESSION_END_FILT_EN (1 << 24) +#define GHWCFG4_B_VALID_FILT_EN (1 << 23) +#define GHWCFG4_A_VALID_FILT_EN (1 << 22) +#define GHWCFG4_VBUS_VALID_FILT_EN (1 << 21) +#define GHWCFG4_IDDIG_FILT_EN (1 << 20) +#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_MASK (0xf << 16) +#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_SHIFT 16 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK (0x3 << 14) +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT 14 +#define GHWCFG4_XHIBER (1 << 7) +#define GHWCFG4_HIBER (1 << 6) +#define GHWCFG4_MIN_AHB_FREQ (1 << 5) +#define GHWCFG4_POWER_OPTIMIZ (1 << 4) +#define GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK (0xf << 0) +#define GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT 0 + +#define GLPMCFG HSOTG_REG(0x0054) +#define GLPMCFG_INV_SEL_HSIC (1 << 31) +#define GLPMCFG_HSIC_CONNECT (1 << 30) +#define GLPMCFG_RETRY_COUNT_STS_MASK (0x7 << 25) +#define GLPMCFG_RETRY_COUNT_STS_SHIFT 25 +#define GLPMCFG_SEND_LPM (1 << 24) +#define GLPMCFG_RETRY_COUNT_MASK (0x7 << 21) +#define GLPMCFG_RETRY_COUNT_SHIFT 21 +#define GLPMCFG_LPM_CHAN_INDEX_MASK (0xf << 17) +#define GLPMCFG_LPM_CHAN_INDEX_SHIFT 17 +#define GLPMCFG_SLEEP_STATE_RESUMEOK (1 << 16) +#define GLPMCFG_PRT_SLEEP_STS (1 << 15) +#define GLPMCFG_LPM_RESP_MASK (0x3 << 13) +#define GLPMCFG_LPM_RESP_SHIFT 13 +#define GLPMCFG_HIRD_THRES_MASK (0x1f << 8) +#define GLPMCFG_HIRD_THRES_SHIFT 8 +#define GLPMCFG_HIRD_THRES_EN (0x10 << 8) +#define GLPMCFG_EN_UTMI_SLEEP (1 << 7) +#define GLPMCFG_REM_WKUP_EN (1 << 6) +#define GLPMCFG_HIRD_MASK (0xf << 2) +#define GLPMCFG_HIRD_SHIFT 2 +#define GLPMCFG_APPL_RESP (1 << 1) +#define GLPMCFG_LPM_CAP_EN (1 << 0) + +#define GPWRDN HSOTG_REG(0x0058) +#define GPWRDN_MULT_VAL_ID_BC_MASK (0x1f << 24) +#define GPWRDN_MULT_VAL_ID_BC_SHIFT 24 +#define GPWRDN_ADP_INT (1 << 23) +#define GPWRDN_BSESSVLD (1 << 22) +#define GPWRDN_IDSTS (1 << 21) +#define GPWRDN_LINESTATE_MASK (0x3 << 19) +#define GPWRDN_LINESTATE_SHIFT 19 +#define GPWRDN_STS_CHGINT_MSK (1 << 18) +#define GPWRDN_STS_CHGINT (1 << 17) +#define GPWRDN_SRP_DET_MSK (1 << 16) +#define GPWRDN_SRP_DET (1 << 15) +#define GPWRDN_CONNECT_DET_MSK (1 << 14) +#define GPWRDN_CONNECT_DET (1 << 13) +#define GPWRDN_DISCONN_DET_MSK (1 << 12) +#define GPWRDN_DISCONN_DET (1 << 11) +#define GPWRDN_RST_DET_MSK (1 << 10) +#define GPWRDN_RST_DET (1 << 9) +#define GPWRDN_LNSTSCHG_MSK (1 << 8) +#define GPWRDN_LNSTSCHG (1 << 7) +#define GPWRDN_DIS_VBUS (1 << 6) +#define GPWRDN_PWRDNSWTCH (1 << 5) +#define GPWRDN_PWRDNRSTN (1 << 4) +#define GPWRDN_PWRDNCLMP (1 << 3) +#define GPWRDN_RESTORE (1 << 2) +#define GPWRDN_PMUACTV (1 << 1) +#define GPWRDN_PMUINTSEL (1 << 0) + +#define GDFIFOCFG HSOTG_REG(0x005c) +#define GDFIFOCFG_EPINFOBASE_MASK (0xffff << 16) +#define GDFIFOCFG_EPINFOBASE_SHIFT 16 +#define GDFIFOCFG_GDFIFOCFG_MASK (0xffff << 0) +#define GDFIFOCFG_GDFIFOCFG_SHIFT 0 + +#define ADPCTL HSOTG_REG(0x0060) +#define ADPCTL_AR_MASK (0x3 << 27) +#define ADPCTL_AR_SHIFT 27 +#define ADPCTL_ADP_TMOUT_INT_MSK (1 << 26) +#define ADPCTL_ADP_SNS_INT_MSK (1 << 25) +#define ADPCTL_ADP_PRB_INT_MSK (1 << 24) +#define ADPCTL_ADP_TMOUT_INT (1 << 23) +#define ADPCTL_ADP_SNS_INT (1 << 22) +#define ADPCTL_ADP_PRB_INT (1 << 21) +#define ADPCTL_ADPENA (1 << 20) +#define ADPCTL_ADPRES (1 << 19) +#define ADPCTL_ENASNS (1 << 18) +#define ADPCTL_ENAPRB (1 << 17) +#define ADPCTL_RTIM_MASK (0x7ff << 6) +#define ADPCTL_RTIM_SHIFT 6 +#define ADPCTL_PRB_PER_MASK (0x3 << 4) +#define ADPCTL_PRB_PER_SHIFT 4 +#define ADPCTL_PRB_DELTA_MASK (0x3 << 2) +#define ADPCTL_PRB_DELTA_SHIFT 2 +#define ADPCTL_PRB_DSCHRG_MASK (0x3 << 0) +#define ADPCTL_PRB_DSCHRG_SHIFT 0 + +#define HPTXFSIZ HSOTG_REG(0x100) + +#define DPTXFSIZN(_a) HSOTG_REG(0x104 + (((_a) - 1) * 4)) +#define DPTXFSIZN_DP_TXF_SIZE_MASK (0xffff << 16) +#define DPTXFSIZN_DP_TXF_SIZE_SHIFT 16 +#define DPTXFSIZN_DP_TXF_SIZE_GET(_v) (((_v) >> 16) & 0xffff) +#define DPTXFSIZN_DP_TXF_SIZE_LIMIT 0xffff +#define DPTXFSIZN_DP_TXF_SIZE(_x) ((_x) << 16) +#define DPTXFSIZN_DP_TXF_ST_ADDR_MASK (0xffff << 0) +#define DPTXFSIZN_DP_TXF_ST_ADDR_SHIFT 0 + +#define FIFOSIZE_DEPTH_MASK (0xffff << 16) +#define FIFOSIZE_DEPTH_SHIFT 16 +#define FIFOSIZE_STARTADDR_MASK (0xffff << 0) +#define FIFOSIZE_STARTADDR_SHIFT 0 + +/* Device mode registers */ + +#define DCFG HSOTG_REG(0x800) +#define DCFG_EPMISCNT_MASK (0x1f << 18) +#define DCFG_EPMISCNT_SHIFT 18 +#define DCFG_EPMISCNT_LIMIT 0x1f +#define DCFG_EPMISCNT(_x) ((_x) << 18) +#define DCFG_PERFRINT_MASK (0x3 << 11) +#define DCFG_PERFRINT_SHIFT 11 +#define DCFG_PERFRINT_LIMIT 0x3 +#define DCFG_PERFRINT(_x) ((_x) << 11) +#define DCFG_DEVADDR_MASK (0x7f << 4) +#define DCFG_DEVADDR_SHIFT 4 +#define DCFG_DEVADDR_LIMIT 0x7f +#define DCFG_DEVADDR(_x) ((_x) << 4) +#define DCFG_NZ_STS_OUT_HSHK (1 << 2) +#define DCFG_DEVSPD_MASK (0x3 << 0) +#define DCFG_DEVSPD_SHIFT 0 +#define DCFG_DEVSPD_HS (0 << 0) +#define DCFG_DEVSPD_FS (1 << 0) +#define DCFG_DEVSPD_LS (2 << 0) +#define DCFG_DEVSPD_FS48 (3 << 0) + +#define DCTL HSOTG_REG(0x804) +#define DCTL_PWRONPRGDONE (1 << 11) +#define DCTL_CGOUTNAK (1 << 10) +#define DCTL_SGOUTNAK (1 << 9) +#define DCTL_CGNPINNAK (1 << 8) +#define DCTL_SGNPINNAK (1 << 7) +#define DCTL_TSTCTL_MASK (0x7 << 4) +#define DCTL_TSTCTL_SHIFT 4 +#define DCTL_GOUTNAKSTS (1 << 3) +#define DCTL_GNPINNAKSTS (1 << 2) +#define DCTL_SFTDISCON (1 << 1) +#define DCTL_RMTWKUPSIG (1 << 0) + +#define DSTS HSOTG_REG(0x808) +#define DSTS_SOFFN_MASK (0x3fff << 8) +#define DSTS_SOFFN_SHIFT 8 +#define DSTS_SOFFN_LIMIT 0x3fff +#define DSTS_SOFFN(_x) ((_x) << 8) +#define DSTS_ERRATICERR (1 << 3) +#define DSTS_ENUMSPD_MASK (0x3 << 1) +#define DSTS_ENUMSPD_SHIFT 1 +#define DSTS_ENUMSPD_HS (0 << 1) +#define DSTS_ENUMSPD_FS (1 << 1) +#define DSTS_ENUMSPD_LS (2 << 1) +#define DSTS_ENUMSPD_FS48 (3 << 1) +#define DSTS_SUSPSTS (1 << 0) + +#define DIEPMSK HSOTG_REG(0x810) +#define DIEPMSK_TXFIFOEMPTY (1 << 7) +#define DIEPMSK_INEPNAKEFFMSK (1 << 6) +#define DIEPMSK_INTKNEPMISMSK (1 << 5) +#define DIEPMSK_INTKNTXFEMPMSK (1 << 4) +#define DIEPMSK_TIMEOUTMSK (1 << 3) +#define DIEPMSK_AHBERRMSK (1 << 2) +#define DIEPMSK_EPDISBLDMSK (1 << 1) +#define DIEPMSK_XFERCOMPLMSK (1 << 0) + +#define DOEPMSK HSOTG_REG(0x814) +#define DOEPMSK_BACK2BACKSETUP (1 << 6) +#define DOEPMSK_OUTTKNEPDISMSK (1 << 4) +#define DOEPMSK_SETUPMSK (1 << 3) +#define DOEPMSK_AHBERRMSK (1 << 2) +#define DOEPMSK_EPDISBLDMSK (1 << 1) +#define DOEPMSK_XFERCOMPLMSK (1 << 0) + +#define DAINT HSOTG_REG(0x818) +#define DAINTMSK HSOTG_REG(0x81C) +#define DAINT_OUTEP_SHIFT 16 +#define DAINT_OUTEP(_x) (1 << ((_x) + 16)) +#define DAINT_INEP(_x) (1 << (_x)) + +#define DTKNQR1 HSOTG_REG(0x820) +#define DTKNQR2 HSOTG_REG(0x824) +#define DTKNQR3 HSOTG_REG(0x830) +#define DTKNQR4 HSOTG_REG(0x834) + +#define DVBUSDIS HSOTG_REG(0x828) +#define DVBUSPULSE HSOTG_REG(0x82C) + +#define DIEPCTL0 HSOTG_REG(0x900) +#define DIEPCTL(_a) HSOTG_REG(0x900 + ((_a) * 0x20)) + +#define DOEPCTL0 HSOTG_REG(0xB00) +#define DOEPCTL(_a) HSOTG_REG(0xB00 + ((_a) * 0x20)) + +/* EP0 specialness: + * bits[29..28] - reserved (no SetD0PID, SetD1PID) + * bits[25..22] - should always be zero, this isn't a periodic endpoint + * bits[10..0] - MPS setting different for EP0 + */ +#define D0EPCTL_MPS_MASK (0x3 << 0) +#define D0EPCTL_MPS_SHIFT 0 +#define D0EPCTL_MPS_64 (0 << 0) +#define D0EPCTL_MPS_32 (1 << 0) +#define D0EPCTL_MPS_16 (2 << 0) +#define D0EPCTL_MPS_8 (3 << 0) + +#define DXEPCTL_EPENA (1 << 31) +#define DXEPCTL_EPDIS (1 << 30) +#define DXEPCTL_SETD1PID (1 << 29) +#define DXEPCTL_SETODDFR (1 << 29) +#define DXEPCTL_SETD0PID (1 << 28) +#define DXEPCTL_SETEVENFR (1 << 28) +#define DXEPCTL_SNAK (1 << 27) +#define DXEPCTL_CNAK (1 << 26) +#define DXEPCTL_TXFNUM_MASK (0xf << 22) +#define DXEPCTL_TXFNUM_SHIFT 22 +#define DXEPCTL_TXFNUM_LIMIT 0xf +#define DXEPCTL_TXFNUM(_x) ((_x) << 22) +#define DXEPCTL_STALL (1 << 21) +#define DXEPCTL_SNP (1 << 20) +#define DXEPCTL_EPTYPE_MASK (0x3 << 18) +#define DXEPCTL_EPTYPE_SHIFT 18 +#define DXEPCTL_EPTYPE_CONTROL (0 << 18) +#define DXEPCTL_EPTYPE_ISO (1 << 18) +#define DXEPCTL_EPTYPE_BULK (2 << 18) +#define DXEPCTL_EPTYPE_INTTERUPT (3 << 18) +#define DXEPCTL_NAKSTS (1 << 17) +#define DXEPCTL_DPID (1 << 16) +#define DXEPCTL_EOFRNUM (1 << 16) +#define DXEPCTL_USBACTEP (1 << 15) +#define DXEPCTL_NEXTEP_MASK (0xf << 11) +#define DXEPCTL_NEXTEP_SHIFT 11 +#define DXEPCTL_NEXTEP_LIMIT 0xf +#define DXEPCTL_NEXTEP(_x) ((_x) << 11) +#define DXEPCTL_MPS_MASK (0x7ff << 0) +#define DXEPCTL_MPS_SHIFT 0 +#define DXEPCTL_MPS_LIMIT 0x7ff +#define DXEPCTL_MPS(_x) ((_x) << 0) + +#define DIEPINT(_a) HSOTG_REG(0x908 + ((_a) * 0x20)) +#define DOEPINT(_a) HSOTG_REG(0xB08 + ((_a) * 0x20)) +#define DXEPINT_INEPNAKEFF (1 << 6) +#define DXEPINT_BACK2BACKSETUP (1 << 6) +#define DXEPINT_INTKNEPMIS (1 << 5) +#define DXEPINT_INTKNTXFEMP (1 << 4) +#define DXEPINT_OUTTKNEPDIS (1 << 4) +#define DXEPINT_TIMEOUT (1 << 3) +#define DXEPINT_SETUP (1 << 3) +#define DXEPINT_AHBERR (1 << 2) +#define DXEPINT_EPDISBLD (1 << 1) +#define DXEPINT_XFERCOMPL (1 << 0) + +#define DIEPTSIZ0 HSOTG_REG(0x910) +#define DIEPTSIZ0_PKTCNT_MASK (0x3 << 19) +#define DIEPTSIZ0_PKTCNT_SHIFT 19 +#define DIEPTSIZ0_PKTCNT_LIMIT 0x3 +#define DIEPTSIZ0_PKTCNT(_x) ((_x) << 19) +#define DIEPTSIZ0_XFERSIZE_MASK (0x7f << 0) +#define DIEPTSIZ0_XFERSIZE_SHIFT 0 +#define DIEPTSIZ0_XFERSIZE_LIMIT 0x7f +#define DIEPTSIZ0_XFERSIZE(_x) ((_x) << 0) + +#define DOEPTSIZ0 HSOTG_REG(0xB10) +#define DOEPTSIZ0_SUPCNT_MASK (0x3 << 29) +#define DOEPTSIZ0_SUPCNT_SHIFT 29 +#define DOEPTSIZ0_SUPCNT_LIMIT 0x3 +#define DOEPTSIZ0_SUPCNT(_x) ((_x) << 29) +#define DOEPTSIZ0_PKTCNT (1 << 19) +#define DOEPTSIZ0_XFERSIZE_MASK (0x7f << 0) +#define DOEPTSIZ0_XFERSIZE_SHIFT 0 + +#define DIEPTSIZ(_a) HSOTG_REG(0x910 + ((_a) * 0x20)) +#define DOEPTSIZ(_a) HSOTG_REG(0xB10 + ((_a) * 0x20)) +#define DXEPTSIZ_MC_MASK (0x3 << 29) +#define DXEPTSIZ_MC_SHIFT 29 +#define DXEPTSIZ_MC_LIMIT 0x3 +#define DXEPTSIZ_MC(_x) ((_x) << 29) +#define DXEPTSIZ_PKTCNT_MASK (0x3ff << 19) +#define DXEPTSIZ_PKTCNT_SHIFT 19 +#define DXEPTSIZ_PKTCNT_LIMIT 0x3ff +#define DXEPTSIZ_PKTCNT_GET(_v) (((_v) >> 19) & 0x3ff) +#define DXEPTSIZ_PKTCNT(_x) ((_x) << 19) +#define DXEPTSIZ_XFERSIZE_MASK (0x7ffff << 0) +#define DXEPTSIZ_XFERSIZE_SHIFT 0 +#define DXEPTSIZ_XFERSIZE_LIMIT 0x7ffff +#define DXEPTSIZ_XFERSIZE_GET(_v) (((_v) >> 0) & 0x7ffff) +#define DXEPTSIZ_XFERSIZE(_x) ((_x) << 0) + +#define DIEPDMA(_a) HSOTG_REG(0x914 + ((_a) * 0x20)) +#define DOEPDMA(_a) HSOTG_REG(0xB14 + ((_a) * 0x20)) + +#define DTXFSTS(_a) HSOTG_REG(0x918 + ((_a) * 0x20)) + +#define PCGCTL HSOTG_REG(0x0e00) +#define PCGCTL_IF_DEV_MODE (1 << 31) +#define PCGCTL_P2HD_PRT_SPD_MASK (0x3 << 29) +#define PCGCTL_P2HD_PRT_SPD_SHIFT 29 +#define PCGCTL_P2HD_DEV_ENUM_SPD_MASK (0x3 << 27) +#define PCGCTL_P2HD_DEV_ENUM_SPD_SHIFT 27 +#define PCGCTL_MAC_DEV_ADDR_MASK (0x7f << 20) +#define PCGCTL_MAC_DEV_ADDR_SHIFT 20 +#define PCGCTL_MAX_TERMSEL (1 << 19) +#define PCGCTL_MAX_XCVRSELECT_MASK (0x3 << 17) +#define PCGCTL_MAX_XCVRSELECT_SHIFT 17 +#define PCGCTL_PORT_POWER (1 << 16) +#define PCGCTL_PRT_CLK_SEL_MASK (0x3 << 14) +#define PCGCTL_PRT_CLK_SEL_SHIFT 14 +#define PCGCTL_ESS_REG_RESTORED (1 << 13) +#define PCGCTL_EXTND_HIBER_SWITCH (1 << 12) +#define PCGCTL_EXTND_HIBER_PWRCLMP (1 << 11) +#define PCGCTL_ENBL_EXTND_HIBER (1 << 10) +#define PCGCTL_RESTOREMODE (1 << 9) +#define PCGCTL_RESETAFTSUSP (1 << 8) +#define PCGCTL_DEEP_SLEEP (1 << 7) +#define PCGCTL_PHY_IN_SLEEP (1 << 6) +#define PCGCTL_ENBL_SLEEP_GATING (1 << 5) +#define PCGCTL_RSTPDWNMODULE (1 << 3) +#define PCGCTL_PWRCLMP (1 << 2) +#define PCGCTL_GATEHCLK (1 << 1) +#define PCGCTL_STOPPCLK (1 << 0) + +#define EPFIFO(_a) HSOTG_REG(0x1000 + ((_a) * 0x1000)) + +/* Host Mode Registers */ + +#define HCFG HSOTG_REG(0x0400) +#define HCFG_MODECHTIMEN (1 << 31) +#define HCFG_PERSCHEDENA (1 << 26) +#define HCFG_FRLISTEN_MASK (0x3 << 24) +#define HCFG_FRLISTEN_SHIFT 24 +#define HCFG_FRLISTEN_8 (0 << 24) +#define FRLISTEN_8_SIZE 8 +#define HCFG_FRLISTEN_16 (1 << 24) +#define FRLISTEN_16_SIZE 16 +#define HCFG_FRLISTEN_32 (2 << 24) +#define FRLISTEN_32_SIZE 32 +#define HCFG_FRLISTEN_64 (3 << 24) +#define FRLISTEN_64_SIZE 64 +#define HCFG_DESCDMA (1 << 23) +#define HCFG_RESVALID_MASK (0xff << 8) +#define HCFG_RESVALID_SHIFT 8 +#define HCFG_ENA32KHZ (1 << 7) +#define HCFG_FSLSSUPP (1 << 2) +#define HCFG_FSLSPCLKSEL_MASK (0x3 << 0) +#define HCFG_FSLSPCLKSEL_SHIFT 0 +#define HCFG_FSLSPCLKSEL_30_60_MHZ (0 << 0) +#define HCFG_FSLSPCLKSEL_48_MHZ (1 << 0) +#define HCFG_FSLSPCLKSEL_6_MHZ (2 << 0) + +#define HFIR HSOTG_REG(0x0404) +#define HFIR_FRINT_MASK (0xffff << 0) +#define HFIR_FRINT_SHIFT 0 +#define HFIR_RLDCTRL (1 << 16) + +#define HFNUM HSOTG_REG(0x0408) +#define HFNUM_FRREM_MASK (0xffff << 16) +#define HFNUM_FRREM_SHIFT 16 +#define HFNUM_FRNUM_MASK (0xffff << 0) +#define HFNUM_FRNUM_SHIFT 0 +#define HFNUM_MAX_FRNUM 0x3fff + +#define HPTXSTS HSOTG_REG(0x0410) +#define TXSTS_QTOP_ODD (1 << 31) +#define TXSTS_QTOP_CHNEP_MASK (0xf << 27) +#define TXSTS_QTOP_CHNEP_SHIFT 27 +#define TXSTS_QTOP_TOKEN_MASK (0x3 << 25) +#define TXSTS_QTOP_TOKEN_SHIFT 25 +#define TXSTS_QTOP_TERMINATE (1 << 24) +#define TXSTS_QSPCAVAIL_MASK (0xff << 16) +#define TXSTS_QSPCAVAIL_SHIFT 16 +#define TXSTS_FSPCAVAIL_MASK (0xffff << 0) +#define TXSTS_FSPCAVAIL_SHIFT 0 + +#define HAINT HSOTG_REG(0x0414) +#define HAINTMSK HSOTG_REG(0x0418) +#define HFLBADDR HSOTG_REG(0x041c) + +#define HPRT0 HSOTG_REG(0x0440) +#define HPRT0_SPD_MASK (0x3 << 17) +#define HPRT0_SPD_SHIFT 17 +#define HPRT0_SPD_HIGH_SPEED (0 << 17) +#define HPRT0_SPD_FULL_SPEED (1 << 17) +#define HPRT0_SPD_LOW_SPEED (2 << 17) +#define HPRT0_TSTCTL_MASK (0xf << 13) +#define HPRT0_TSTCTL_SHIFT 13 +#define HPRT0_PWR (1 << 12) +#define HPRT0_LNSTS_MASK (0x3 << 10) +#define HPRT0_LNSTS_SHIFT 10 +#define HPRT0_RST (1 << 8) +#define HPRT0_SUSP (1 << 7) +#define HPRT0_RES (1 << 6) +#define HPRT0_OVRCURRCHG (1 << 5) +#define HPRT0_OVRCURRACT (1 << 4) +#define HPRT0_ENACHG (1 << 3) +#define HPRT0_ENA (1 << 2) +#define HPRT0_CONNDET (1 << 1) +#define HPRT0_CONNSTS (1 << 0) + +#define HCCHAR(_ch) HSOTG_REG(0x0500 + 0x20 * (_ch)) +#define HCCHAR_CHENA (1 << 31) +#define HCCHAR_CHDIS (1 << 30) +#define HCCHAR_ODDFRM (1 << 29) +#define HCCHAR_DEVADDR_MASK (0x7f << 22) +#define HCCHAR_DEVADDR_SHIFT 22 +#define HCCHAR_MULTICNT_MASK (0x3 << 20) +#define HCCHAR_MULTICNT_SHIFT 20 +#define HCCHAR_EPTYPE_MASK (0x3 << 18) +#define HCCHAR_EPTYPE_SHIFT 18 +#define HCCHAR_LSPDDEV (1 << 17) +#define HCCHAR_EPDIR (1 << 15) +#define HCCHAR_EPNUM_MASK (0xf << 11) +#define HCCHAR_EPNUM_SHIFT 11 +#define HCCHAR_MPS_MASK (0x7ff << 0) +#define HCCHAR_MPS_SHIFT 0 + +#define HCSPLT(_ch) HSOTG_REG(0x0504 + 0x20 * (_ch)) +#define HCSPLT_SPLTENA (1 << 31) +#define HCSPLT_COMPSPLT (1 << 16) +#define HCSPLT_XACTPOS_MASK (0x3 << 14) +#define HCSPLT_XACTPOS_SHIFT 14 +#define HCSPLT_XACTPOS_MID (0 << 14) +#define HCSPLT_XACTPOS_END (1 << 14) +#define HCSPLT_XACTPOS_BEGIN (2 << 14) +#define HCSPLT_XACTPOS_ALL (3 << 14) +#define HCSPLT_HUBADDR_MASK (0x7f << 7) +#define HCSPLT_HUBADDR_SHIFT 7 +#define HCSPLT_PRTADDR_MASK (0x7f << 0) +#define HCSPLT_PRTADDR_SHIFT 0 + +#define HCINT(_ch) HSOTG_REG(0x0508 + 0x20 * (_ch)) +#define HCINTMSK(_ch) HSOTG_REG(0x050c + 0x20 * (_ch)) +#define HCINTMSK_RESERVED14_31 (0x3ffff << 14) +#define HCINTMSK_FRM_LIST_ROLL (1 << 13) +#define HCINTMSK_XCS_XACT (1 << 12) +#define HCINTMSK_BNA (1 << 11) +#define HCINTMSK_DATATGLERR (1 << 10) +#define HCINTMSK_FRMOVRUN (1 << 9) +#define HCINTMSK_BBLERR (1 << 8) +#define HCINTMSK_XACTERR (1 << 7) +#define HCINTMSK_NYET (1 << 6) +#define HCINTMSK_ACK (1 << 5) +#define HCINTMSK_NAK (1 << 4) +#define HCINTMSK_STALL (1 << 3) +#define HCINTMSK_AHBERR (1 << 2) +#define HCINTMSK_CHHLTD (1 << 1) +#define HCINTMSK_XFERCOMPL (1 << 0) + +#define HCTSIZ(_ch) HSOTG_REG(0x0510 + 0x20 * (_ch)) +#define TSIZ_DOPNG (1 << 31) +#define TSIZ_SC_MC_PID_MASK (0x3 << 29) +#define TSIZ_SC_MC_PID_SHIFT 29 +#define TSIZ_SC_MC_PID_DATA0 (0 << 29) +#define TSIZ_SC_MC_PID_DATA2 (1 << 29) +#define TSIZ_SC_MC_PID_DATA1 (2 << 29) +#define TSIZ_SC_MC_PID_MDATA (3 << 29) +#define TSIZ_SC_MC_PID_SETUP (3 << 29) +#define TSIZ_PKTCNT_MASK (0x3ff << 19) +#define TSIZ_PKTCNT_SHIFT 19 +#define TSIZ_NTD_MASK (0xff << 8) +#define TSIZ_NTD_SHIFT 8 +#define TSIZ_SCHINFO_MASK (0xff << 0) +#define TSIZ_SCHINFO_SHIFT 0 +#define TSIZ_XFERSIZE_MASK (0x7ffff << 0) +#define TSIZ_XFERSIZE_SHIFT 0 + +#define HCDMA(_ch) HSOTG_REG(0x0514 + 0x20 * (_ch)) +#define HCDMA_DMA_ADDR_MASK (0x1fffff << 11) +#define HCDMA_DMA_ADDR_SHIFT 11 +#define HCDMA_CTD_MASK (0xff << 3) +#define HCDMA_CTD_SHIFT 3 + +#define HCDMAB(_ch) HSOTG_REG(0x051c + 0x20 * (_ch)) + +#define HCFIFO(_ch) HSOTG_REG(0x1000 + 0x1000 * (_ch)) + +/** + * struct dwc2_hcd_dma_desc - Host-mode DMA descriptor structure + * + * @status: DMA descriptor status quadlet + * @buf: DMA descriptor data buffer pointer + * + * DMA Descriptor structure contains two quadlets: + * Status quadlet and Data buffer pointer. + */ +struct dwc2_hcd_dma_desc { + u32 status; + u32 buf; +}; + +#define HOST_DMA_A (1 << 31) +#define HOST_DMA_STS_MASK (0x3 << 28) +#define HOST_DMA_STS_SHIFT 28 +#define HOST_DMA_STS_PKTERR (1 << 28) +#define HOST_DMA_EOL (1 << 26) +#define HOST_DMA_IOC (1 << 25) +#define HOST_DMA_SUP (1 << 24) +#define HOST_DMA_ALT_QTD (1 << 23) +#define HOST_DMA_QTD_OFFSET_MASK (0x3f << 17) +#define HOST_DMA_QTD_OFFSET_SHIFT 17 +#define HOST_DMA_ISOC_NBYTES_MASK (0xfff << 0) +#define HOST_DMA_ISOC_NBYTES_SHIFT 0 +#define HOST_DMA_NBYTES_MASK (0x1ffff << 0) +#define HOST_DMA_NBYTES_SHIFT 0 + +#define MAX_DMA_DESC_SIZE 131071 +#define MAX_DMA_DESC_NUM_GENERIC 64 +#define MAX_DMA_DESC_NUM_HS_ISOC 256 + +#endif /* __DWC2_HW_H__ */ |