V4L/DVB (12248): v4l: vpfe capture bridge driver for DM355 and DM6446

This the vpfe capture bridge driver for doing video
capture on DM355 and DM6446 evms. The ccdc hw modules register with the
driver and are used for configuring the CCD Controller for a specific
decoder interface. The driver also registers the sub devices required
for a specific evm. More than one sub devices can be registered.
This allows driver to switch dynamically to capture video from
any sub device that is registered. Currently only one sub device
(tvp5146) is supported. But in future this driver is expected
to do capture from sensor devices such as Micron's MT9T001, MT9T031
and MT9P031 etc. The driver currently supports MMAP based IO.

Reviewed by: Laurent Pinchart <laurent.pinchart@skynet.be>
Reviewed by: Alexey Klimov <klimov.linux@gmail.com>

Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

3 files changed, 2373 insertions, 0 deletions

diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c
new file mode 100644
index 0000000..402ce43
--- /dev/null
+++ b/drivers/media/video/davinci/vpfe_capture.c
@@ -0,0 +1,2124 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * Driver name : VPFE Capture driver
+ *    VPFE Capture driver allows applications to capture and stream video
+ *    frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as
+ *    TVP5146 or  Raw Bayer RGB image data from an image sensor
+ *    such as Microns' MT9T001, MT9T031 etc.
+ *
+ *    These SoCs have, in common, a Video Processing Subsystem (VPSS) that
+ *    consists of a Video Processing Front End (VPFE) for capturing
+ *    video/raw image data and Video Processing Back End (VPBE) for displaying
+ *    YUV data through an in-built analog encoder or Digital LCD port. This
+ *    driver is for capture through VPFE. A typical EVM using these SoCs have
+ *    following high level configuration.
+ *
+ *
+ *    decoder(TVP5146/		YUV/
+ * 	     MT9T001)   -->  Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF)
+ *    				data input              |      |
+ *							V      |
+ *						      SDRAM    |
+ *							       V
+ *							   Image Processor
+ *							       |
+ *							       V
+ *							     SDRAM
+ *    The data flow happens from a decoder connected to the VPFE over a
+ *    YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface
+ *    and to the input of VPFE through an optional MUX (if more inputs are
+ *    to be interfaced on the EVM). The input data is first passed through
+ *    CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC
+ *    does very little or no processing on YUV data and does pre-process Raw
+ *    Bayer RGB data through modules such as Defect Pixel Correction (DFC)
+ *    Color Space Conversion (CSC), data gain/offset etc. After this, data
+ *    can be written to SDRAM or can be connected to the image processing
+ *    block such as IPIPE (on DM355 only).
+ *
+ *    Features supported
+ *  		- MMAP IO
+ *		- Capture using TVP5146 over BT.656
+ *		- support for interfacing decoders using sub device model
+ *		- Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV
+ *		  data capture to SDRAM.
+ *    TODO list
+ *		- Support multiple REQBUF after open
+ *		- Support for de-allocating buffers through REQBUF
+ *		- Support for Raw Bayer RGB capture
+ *		- Support for chaining Image Processor
+ *		- Support for static allocation of buffers
+ *		- Support for USERPTR IO
+ *		- Support for STREAMON before QBUF
+ *		- Support for control ioctls
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/version.h>
+#include <media/v4l2-common.h>
+#include <linux/io.h>
+#include <media/davinci/vpfe_capture.h>
+#include "ccdc_hw_device.h"
+
+static int debug;
+static u32 numbuffers = 3;
+static u32 bufsize = (720 * 576 * 2);
+
+module_param(numbuffers, uint, S_IRUGO);
+module_param(bufsize, uint, S_IRUGO);
+module_param(debug, int, 0644);
+
+MODULE_PARM_DESC(numbuffers, "buffer count (default:3)");
+MODULE_PARM_DESC(bufsize, "buffer size in bytes (default:720 x 576 x 2)");
+MODULE_PARM_DESC(debug, "Debug level 0-1");
+
+MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments");
+
+/* standard information */
+struct vpfe_standard {
+	v4l2_std_id std_id;
+	unsigned int width;
+	unsigned int height;
+	struct v4l2_fract pixelaspect;
+	/* 0 - progressive, 1 - interlaced */
+	int frame_format;
+};
+
+/* ccdc configuration */
+struct ccdc_config {
+	/* This make sure vpfe is probed and ready to go */
+	int vpfe_probed;
+	/* name of ccdc device */
+	char name[32];
+	/* for storing mem maps for CCDC */
+	int ccdc_addr_size;
+	void *__iomem ccdc_addr;
+};
+
+/* data structures */
+static struct vpfe_config_params config_params = {
+	.min_numbuffers = 3,
+	.numbuffers = 3,
+	.min_bufsize = 720 * 480 * 2,
+	.device_bufsize = 720 * 576 * 2,
+};
+
+/* ccdc device registered */
+static struct ccdc_hw_device *ccdc_dev;
+/* lock for accessing ccdc information */
+static DEFINE_MUTEX(ccdc_lock);
+/* ccdc configuration */
+static struct ccdc_config *ccdc_cfg;
+
+const struct vpfe_standard vpfe_standards[] = {
+	{V4L2_STD_525_60, 720, 480, {11, 10}, 1},
+	{V4L2_STD_625_50, 720, 576, {54, 59}, 1},
+};
+
+/* Used when raw Bayer image from ccdc is directly captured to SDRAM */
+static const struct vpfe_pixel_format vpfe_pix_fmts[] = {
+	{
+		.fmtdesc = {
+			.index = 0,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "Bayer GrRBGb 8bit A-Law compr.",
+			.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		},
+		.bpp = 1,
+	},
+	{
+		.fmtdesc = {
+			.index = 1,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "Bayer GrRBGb - 16bit",
+			.pixelformat = V4L2_PIX_FMT_SBGGR16,
+		},
+		.bpp = 2,
+	},
+	{
+		.fmtdesc = {
+			.index = 2,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "Bayer GrRBGb 8bit DPCM compr.",
+			.pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8,
+		},
+		.bpp = 1,
+	},
+	{
+		.fmtdesc = {
+			.index = 3,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "YCbCr 4:2:2 Interleaved UYVY",
+			.pixelformat = V4L2_PIX_FMT_UYVY,
+		},
+		.bpp = 2,
+	},
+	{
+		.fmtdesc = {
+			.index = 4,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "YCbCr 4:2:2 Interleaved YUYV",
+			.pixelformat = V4L2_PIX_FMT_YUYV,
+		},
+		.bpp = 2,
+	},
+	{
+		.fmtdesc = {
+			.index = 5,
+			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+			.description = "Y/CbCr 4:2:0 - Semi planar",
+			.pixelformat = V4L2_PIX_FMT_NV12,
+		},
+		.bpp = 1,
+	},
+};
+
+/*
+ * vpfe_lookup_pix_format()
+ * lookup an entry in the vpfe pix format table based on pix_format
+ */
+static const struct vpfe_pixel_format *vpfe_lookup_pix_format(u32 pix_format)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(vpfe_pix_fmts); i++) {
+		if (pix_format == vpfe_pix_fmts[i].fmtdesc.pixelformat)
+			return &vpfe_pix_fmts[i];
+	}
+	return NULL;
+}
+
+/*
+ * vpfe_register_ccdc_device. CCDC module calls this to
+ * register with vpfe capture
+ */
+int vpfe_register_ccdc_device(struct ccdc_hw_device *dev)
+{
+	int ret = 0;
+	printk(KERN_NOTICE "vpfe_register_ccdc_device: %s\n", dev->name);
+
+	BUG_ON(!dev->hw_ops.open);
+	BUG_ON(!dev->hw_ops.enable);
+	BUG_ON(!dev->hw_ops.set_hw_if_params);
+	BUG_ON(!dev->hw_ops.configure);
+	BUG_ON(!dev->hw_ops.set_buftype);
+	BUG_ON(!dev->hw_ops.get_buftype);
+	BUG_ON(!dev->hw_ops.enum_pix);
+	BUG_ON(!dev->hw_ops.set_frame_format);
+	BUG_ON(!dev->hw_ops.get_frame_format);
+	BUG_ON(!dev->hw_ops.get_pixel_format);
+	BUG_ON(!dev->hw_ops.set_pixel_format);
+	BUG_ON(!dev->hw_ops.set_params);
+	BUG_ON(!dev->hw_ops.set_image_window);
+	BUG_ON(!dev->hw_ops.get_image_window);
+	BUG_ON(!dev->hw_ops.get_line_length);
+	BUG_ON(!dev->hw_ops.setfbaddr);
+	BUG_ON(!dev->hw_ops.getfid);
+
+	mutex_lock(&ccdc_lock);
+	if (NULL == ccdc_cfg) {
+		/*
+		 * TODO. Will this ever happen? if so, we need to fix it.
+		 * Proabably we need to add the request to a linked list and
+		 * walk through it during vpfe probe
+		 */
+		printk(KERN_ERR "vpfe capture not initialized\n");
+		ret = -1;
+		goto unlock;
+	}
+
+	if (strcmp(dev->name, ccdc_cfg->name)) {
+		/* ignore this ccdc */
+		ret = -1;
+		goto unlock;
+	}
+
+	if (ccdc_dev) {
+		printk(KERN_ERR "ccdc already registered\n");
+		ret = -1;
+		goto unlock;
+	}
+
+	ccdc_dev = dev;
+	dev->hw_ops.set_ccdc_base(ccdc_cfg->ccdc_addr,
+				  ccdc_cfg->ccdc_addr_size);
+unlock:
+	mutex_unlock(&ccdc_lock);
+	return ret;
+}
+EXPORT_SYMBOL(vpfe_register_ccdc_device);
+
+/*
+ * vpfe_unregister_ccdc_device. CCDC module calls this to
+ * unregister with vpfe capture
+ */
+void vpfe_unregister_ccdc_device(struct ccdc_hw_device *dev)
+{
+	if (NULL == dev) {
+		printk(KERN_ERR "invalid ccdc device ptr\n");
+		return;
+	}
+
+	printk(KERN_NOTICE "vpfe_unregister_ccdc_device, dev->name = %s\n",
+		dev->name);
+
+	if (strcmp(dev->name, ccdc_cfg->name)) {
+		/* ignore this ccdc */
+		return;
+	}
+
+	mutex_lock(&ccdc_lock);
+	ccdc_dev = NULL;
+	mutex_unlock(&ccdc_lock);
+	return;
+}
+EXPORT_SYMBOL(vpfe_unregister_ccdc_device);
+
+/*
+ * vpfe_get_ccdc_image_format - Get image parameters based on CCDC settings
+ */
+static int vpfe_get_ccdc_image_format(struct vpfe_device *vpfe_dev,
+				 struct v4l2_format *f)
+{
+	struct v4l2_rect image_win;
+	enum ccdc_buftype buf_type;
+	enum ccdc_frmfmt frm_fmt;
+
+	memset(f, 0, sizeof(*f));
+	f->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+	ccdc_dev->hw_ops.get_image_window(&image_win);
+	f->fmt.pix.width = image_win.width;
+	f->fmt.pix.height = image_win.height;
+	f->fmt.pix.bytesperline = ccdc_dev->hw_ops.get_line_length();
+	f->fmt.pix.sizeimage = f->fmt.pix.bytesperline *
+				f->fmt.pix.height;
+	buf_type = ccdc_dev->hw_ops.get_buftype();
+	f->fmt.pix.pixelformat = ccdc_dev->hw_ops.get_pixel_format();
+	frm_fmt = ccdc_dev->hw_ops.get_frame_format();
+	if (frm_fmt == CCDC_FRMFMT_PROGRESSIVE)
+		f->fmt.pix.field = V4L2_FIELD_NONE;
+	else if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+		if (buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED)
+			f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+		else if (buf_type == CCDC_BUFTYPE_FLD_SEPARATED)
+			f->fmt.pix.field = V4L2_FIELD_SEQ_TB;
+		else {
+			v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf_type\n");
+			return -EINVAL;
+		}
+	} else {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid frm_fmt\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * vpfe_config_ccdc_image_format()
+ * For a pix format, configure ccdc to setup the capture
+ */
+static int vpfe_config_ccdc_image_format(struct vpfe_device *vpfe_dev)
+{
+	enum ccdc_frmfmt frm_fmt = CCDC_FRMFMT_INTERLACED;
+	int ret = 0;
+
+	if (ccdc_dev->hw_ops.set_pixel_format(
+			vpfe_dev->fmt.fmt.pix.pixelformat) < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"couldn't set pix format in ccdc\n");
+		return -EINVAL;
+	}
+	/* configure the image window */
+	ccdc_dev->hw_ops.set_image_window(&vpfe_dev->crop);
+
+	switch (vpfe_dev->fmt.fmt.pix.field) {
+	case V4L2_FIELD_INTERLACED:
+		/* do nothing, since it is default */
+		ret = ccdc_dev->hw_ops.set_buftype(
+				CCDC_BUFTYPE_FLD_INTERLEAVED);
+		break;
+	case V4L2_FIELD_NONE:
+		frm_fmt = CCDC_FRMFMT_PROGRESSIVE;
+		/* buffer type only applicable for interlaced scan */
+		break;
+	case V4L2_FIELD_SEQ_TB:
+		ret = ccdc_dev->hw_ops.set_buftype(
+				CCDC_BUFTYPE_FLD_SEPARATED);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set the frame format */
+	if (!ret)
+		ret = ccdc_dev->hw_ops.set_frame_format(frm_fmt);
+	return ret;
+}
+/*
+ * vpfe_config_image_format()
+ * For a given standard, this functions sets up the default
+ * pix format & crop values in the vpfe device and ccdc.  It first
+ * starts with defaults based values from the standard table.
+ * It then checks if sub device support g_fmt and then override the
+ * values based on that.Sets crop values to match with scan resolution
+ * starting at 0,0. It calls vpfe_config_ccdc_image_format() set the
+ * values in ccdc
+ */
+static int vpfe_config_image_format(struct vpfe_device *vpfe_dev,
+				    const v4l2_std_id *std_id)
+{
+	struct vpfe_subdev_info *sdinfo = vpfe_dev->current_subdev;
+	int i, ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(vpfe_standards); i++) {
+		if (vpfe_standards[i].std_id & *std_id) {
+			vpfe_dev->std_info.active_pixels =
+					vpfe_standards[i].width;
+			vpfe_dev->std_info.active_lines =
+					vpfe_standards[i].height;
+			vpfe_dev->std_info.frame_format =
+					vpfe_standards[i].frame_format;
+			vpfe_dev->std_index = i;
+			break;
+		}
+	}
+
+	if (i ==  ARRAY_SIZE(vpfe_standards)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "standard not supported\n");
+		return -EINVAL;
+	}
+
+	vpfe_dev->crop.top = 0;
+	vpfe_dev->crop.left = 0;
+	vpfe_dev->crop.width = vpfe_dev->std_info.active_pixels;
+	vpfe_dev->crop.height = vpfe_dev->std_info.active_lines;
+	vpfe_dev->fmt.fmt.pix.width = vpfe_dev->crop.width;
+	vpfe_dev->fmt.fmt.pix.height = vpfe_dev->crop.height;
+
+	/* first field and frame format based on standard frame format */
+	if (vpfe_dev->std_info.frame_format) {
+		vpfe_dev->fmt.fmt.pix.field = V4L2_FIELD_INTERLACED;
+		/* assume V4L2_PIX_FMT_UYVY as default */
+		vpfe_dev->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY;
+	} else {
+		vpfe_dev->fmt.fmt.pix.field = V4L2_FIELD_NONE;
+		/* assume V4L2_PIX_FMT_SBGGR8 */
+		vpfe_dev->fmt.fmt.pix.pixelformat = V4L2_PIX_FMT_SBGGR8;
+	}
+
+	/* if sub device supports g_fmt, override the defaults */
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
+			sdinfo->grp_id, video, g_fmt, &vpfe_dev->fmt);
+
+	if (ret && ret != -ENOIOCTLCMD) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"error in getting g_fmt from sub device\n");
+		return ret;
+	}
+
+	/* Sets the values in CCDC */
+	ret = vpfe_config_ccdc_image_format(vpfe_dev);
+	if (ret)
+		return ret;
+
+	/* Update the values of sizeimage and bytesperline */
+	if (!ret) {
+		vpfe_dev->fmt.fmt.pix.bytesperline =
+			ccdc_dev->hw_ops.get_line_length();
+		vpfe_dev->fmt.fmt.pix.sizeimage =
+			vpfe_dev->fmt.fmt.pix.bytesperline *
+			vpfe_dev->fmt.fmt.pix.height;
+	}
+	return ret;
+}
+
+static int vpfe_initialize_device(struct vpfe_device *vpfe_dev)
+{
+	int ret = 0;
+
+	/* set first input of current subdevice as the current input */
+	vpfe_dev->current_input = 0;
+
+	/* set default standard */
+	vpfe_dev->std_index = 0;
+
+	/* Configure the default format information */
+	ret = vpfe_config_image_format(vpfe_dev,
+				&vpfe_standards[vpfe_dev->std_index].std_id);
+	if (ret)
+		return ret;
+
+	/* now open the ccdc device to initialize it */
+	mutex_lock(&ccdc_lock);
+	if (NULL == ccdc_dev) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "ccdc device not registered\n");
+		ret = -ENODEV;
+		goto unlock;
+	}
+
+	if (!try_module_get(ccdc_dev->owner)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Couldn't lock ccdc module\n");
+		ret = -ENODEV;
+		goto unlock;
+	}
+	ret = ccdc_dev->hw_ops.open(vpfe_dev->pdev);
+	if (!ret)
+		vpfe_dev->initialized = 1;
+unlock:
+	mutex_unlock(&ccdc_lock);
+	return ret;
+}
+
+/*
+ * vpfe_open : It creates object of file handle structure and
+ * stores it in private_data  member of filepointer
+ */
+static int vpfe_open(struct file *file)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_open\n");
+
+	if (!vpfe_dev->cfg->num_subdevs) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "No decoder registered\n");
+		return -ENODEV;
+	}
+
+	/* Allocate memory for the file handle object */
+	fh = kmalloc(sizeof(struct vpfe_fh), GFP_KERNEL);
+	if (NULL == fh) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"unable to allocate memory for file handle object\n");
+		return -ENOMEM;
+	}
+	/* store pointer to fh in private_data member of file */
+	file->private_data = fh;
+	fh->vpfe_dev = vpfe_dev;
+	mutex_lock(&vpfe_dev->lock);
+	/* If decoder is not initialized. initialize it */
+	if (!vpfe_dev->initialized) {
+		if (vpfe_initialize_device(vpfe_dev)) {
+			mutex_unlock(&vpfe_dev->lock);
+			return -ENODEV;
+		}
+	}
+	/* Increment device usrs counter */
+	vpfe_dev->usrs++;
+	/* Set io_allowed member to false */
+	fh->io_allowed = 0;
+	/* Initialize priority of this instance to default priority */
+	fh->prio = V4L2_PRIORITY_UNSET;
+	v4l2_prio_open(&vpfe_dev->prio, &fh->prio);
+	mutex_unlock(&vpfe_dev->lock);
+	return 0;
+}
+
+static void vpfe_schedule_next_buffer(struct vpfe_device *vpfe_dev)
+{
+	unsigned long addr;
+
+	vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next,
+					struct videobuf_buffer, queue);
+	list_del(&vpfe_dev->next_frm->queue);
+	vpfe_dev->next_frm->state = VIDEOBUF_ACTIVE;
+	addr = videobuf_to_dma_contig(vpfe_dev->next_frm);
+	ccdc_dev->hw_ops.setfbaddr(addr);
+}
+
+static void vpfe_process_buffer_complete(struct vpfe_device *vpfe_dev)
+{
+	struct timeval timevalue;
+
+	do_gettimeofday(&timevalue);
+	vpfe_dev->cur_frm->ts = timevalue;
+	vpfe_dev->cur_frm->state = VIDEOBUF_DONE;
+	vpfe_dev->cur_frm->size = vpfe_dev->fmt.fmt.pix.sizeimage;
+	wake_up_interruptible(&vpfe_dev->cur_frm->done);
+	vpfe_dev->cur_frm = vpfe_dev->next_frm;
+}
+
+/* ISR for VINT0*/
+static irqreturn_t vpfe_isr(int irq, void *dev_id)
+{
+	struct vpfe_device *vpfe_dev = dev_id;
+	enum v4l2_field field;
+	unsigned long addr;
+	int fid;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nStarting vpfe_isr...\n");
+	field = vpfe_dev->fmt.fmt.pix.field;
+
+	/* if streaming not started, don't do anything */
+	if (!vpfe_dev->started)
+		return IRQ_HANDLED;
+
+	/* only for 6446 this will be applicable */
+	if (NULL != ccdc_dev->hw_ops.reset)
+		ccdc_dev->hw_ops.reset();
+
+	if (field == V4L2_FIELD_NONE) {
+		/* handle progressive frame capture */
+		v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+			"frame format is progressive...\n");
+		if (vpfe_dev->cur_frm != vpfe_dev->next_frm)
+			vpfe_process_buffer_complete(vpfe_dev);
+		return IRQ_HANDLED;
+	}
+
+	/* interlaced or TB capture check which field we are in hardware */
+	fid = ccdc_dev->hw_ops.getfid();
+
+	/* switch the software maintained field id */
+	vpfe_dev->field_id ^= 1;
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "field id = %x:%x.\n",
+		fid, vpfe_dev->field_id);
+	if (fid == vpfe_dev->field_id) {
+		/* we are in-sync here,continue */
+		if (fid == 0) {
+			/*
+			 * One frame is just being captured. If the next frame
+			 * is available, release the current frame and move on
+			 */
+			if (vpfe_dev->cur_frm != vpfe_dev->next_frm)
+				vpfe_process_buffer_complete(vpfe_dev);
+			/*
+			 * based on whether the two fields are stored
+			 * interleavely or separately in memory, reconfigure
+			 * the CCDC memory address
+			 */
+			if (field == V4L2_FIELD_SEQ_TB) {
+				addr =
+				  videobuf_to_dma_contig(vpfe_dev->cur_frm);
+				addr += vpfe_dev->field_off;
+				ccdc_dev->hw_ops.setfbaddr(addr);
+			}
+			return IRQ_HANDLED;
+		}
+		/*
+		 * if one field is just being captured configure
+		 * the next frame get the next frame from the empty
+		 * queue if no frame is available hold on to the
+		 * current buffer
+		 */
+		spin_lock(&vpfe_dev->dma_queue_lock);
+		if (!list_empty(&vpfe_dev->dma_queue) &&
+		    vpfe_dev->cur_frm == vpfe_dev->next_frm)
+			vpfe_schedule_next_buffer(vpfe_dev);
+		spin_unlock(&vpfe_dev->dma_queue_lock);
+	} else if (fid == 0) {
+		/*
+		 * out of sync. Recover from any hardware out-of-sync.
+		 * May loose one frame
+		 */
+		vpfe_dev->field_id = fid;
+	}
+	return IRQ_HANDLED;
+}
+
+/* vdint1_isr - isr handler for VINT1 interrupt */
+static irqreturn_t vdint1_isr(int irq, void *dev_id)
+{
+	struct vpfe_device *vpfe_dev = dev_id;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "\nInside vdint1_isr...\n");
+
+	/* if streaming not started, don't do anything */
+	if (!vpfe_dev->started)
+		return IRQ_HANDLED;
+
+	spin_lock(&vpfe_dev->dma_queue_lock);
+	if ((vpfe_dev->fmt.fmt.pix.field == V4L2_FIELD_NONE) &&
+	    !list_empty(&vpfe_dev->dma_queue) &&
+	    vpfe_dev->cur_frm == vpfe_dev->next_frm)
+		vpfe_schedule_next_buffer(vpfe_dev);
+	spin_unlock(&vpfe_dev->dma_queue_lock);
+	return IRQ_HANDLED;
+}
+
+static void vpfe_detach_irq(struct vpfe_device *vpfe_dev)
+{
+	enum ccdc_frmfmt frame_format;
+
+	frame_format = ccdc_dev->hw_ops.get_frame_format();
+	if (frame_format == CCDC_FRMFMT_PROGRESSIVE)
+		free_irq(IRQ_VDINT1, vpfe_dev);
+}
+
+static int vpfe_attach_irq(struct vpfe_device *vpfe_dev)
+{
+	enum ccdc_frmfmt frame_format;
+
+	frame_format = ccdc_dev->hw_ops.get_frame_format();
+	if (frame_format == CCDC_FRMFMT_PROGRESSIVE) {
+		return request_irq(vpfe_dev->ccdc_irq1, vdint1_isr,
+				    IRQF_DISABLED, "vpfe_capture1",
+				    vpfe_dev);
+	}
+	return 0;
+}
+
+/* vpfe_stop_ccdc_capture: stop streaming in ccdc/isif */
+static void vpfe_stop_ccdc_capture(struct vpfe_device *vpfe_dev)
+{
+	vpfe_dev->started = 0;
+	ccdc_dev->hw_ops.enable(0);
+	if (ccdc_dev->hw_ops.enable_out_to_sdram)
+		ccdc_dev->hw_ops.enable_out_to_sdram(0);
+}
+
+/*
+ * vpfe_release : This function deletes buffer queue, frees the
+ * buffers and the vpfe file  handle
+ */
+static int vpfe_release(struct file *file)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+	struct vpfe_subdev_info *sdinfo;
+	int ret;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_release\n");
+
+	/* Get the device lock */
+	mutex_lock(&vpfe_dev->lock);
+	/* if this instance is doing IO */
+	if (fh->io_allowed) {
+		if (vpfe_dev->started) {
+			sdinfo = vpfe_dev->current_subdev;
+			ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev,
+							 sdinfo->grp_id,
+							 video, s_stream, 0);
+			if (ret && (ret != -ENOIOCTLCMD))
+				v4l2_err(&vpfe_dev->v4l2_dev,
+				"stream off failed in subdev\n");
+			vpfe_stop_ccdc_capture(vpfe_dev);
+			vpfe_detach_irq(vpfe_dev);
+			videobuf_streamoff(&vpfe_dev->buffer_queue);
+		}
+		vpfe_dev->io_usrs = 0;
+		vpfe_dev->numbuffers = config_params.numbuffers;
+	}
+
+	/* Decrement device usrs counter */
+	vpfe_dev->usrs--;
+	/* Close the priority */
+	v4l2_prio_close(&vpfe_dev->prio, &fh->prio);
+	/* If this is the last file handle */
+	if (!vpfe_dev->usrs) {
+		vpfe_dev->initialized = 0;
+		if (ccdc_dev->hw_ops.close)
+			ccdc_dev->hw_ops.close(vpfe_dev->pdev);
+		module_put(ccdc_dev->owner);
+	}
+	mutex_unlock(&vpfe_dev->lock);
+	file->private_data = NULL;
+	/* Free memory allocated to file handle object */
+	kfree(fh);
+	return 0;
+}
+
+/*
+ * vpfe_mmap : It is used to map kernel space buffers
+ * into user spaces
+ */
+static int vpfe_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	/* Get the device object and file handle object */
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_mmap\n");
+
+	return videobuf_mmap_mapper(&vpfe_dev->buffer_queue, vma);
+}
+
+/*
+ * vpfe_poll: It is used for select/poll system call
+ */
+static unsigned int vpfe_poll(struct file *file, poll_table *wait)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_poll\n");
+
+	if (vpfe_dev->started)
+		return videobuf_poll_stream(file,
+					    &vpfe_dev->buffer_queue, wait);
+	return 0;
+}
+
+/* vpfe capture driver file operations */
+static const struct v4l2_file_operations vpfe_fops = {
+	.owner = THIS_MODULE,
+	.open = vpfe_open,
+	.release = vpfe_release,
+	.unlocked_ioctl = video_ioctl2,
+	.mmap = vpfe_mmap,
+	.poll = vpfe_poll
+};
+
+/*
+ * vpfe_check_format()
+ * This function adjust the input pixel format as per hardware
+ * capabilities and update the same in pixfmt.
+ * Following algorithm used :-
+ *
+ *	If given pixformat is not in the vpfe list of pix formats or not
+ *	supported by the hardware, current value of pixformat in the device
+ *	is used
+ *	If given field is not supported, then current field is used. If field
+ *	is different from current, then it is matched with that from sub device.
+ *	Minimum height is 2 lines for interlaced or tb field and 1 line for
+ *	progressive. Maximum height is clamped to active active lines of scan
+ *	Minimum width is 32 bytes in memory and width is clamped to active
+ *	pixels of scan.
+ *	bytesperline is a multiple of 32.
+ */
+static const struct vpfe_pixel_format *
+	vpfe_check_format(struct vpfe_device *vpfe_dev,
+			  struct v4l2_pix_format *pixfmt)
+{
+	u32 min_height = 1, min_width = 32, max_width, max_height;
+	const struct vpfe_pixel_format *vpfe_pix_fmt;
+	u32 pix;
+	int temp, found;
+
+	vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
+	if (NULL == vpfe_pix_fmt) {
+		/*
+		 * use current pixel format in the vpfe device. We
+		 * will find this pix format in the table
+		 */
+		pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat;
+		vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
+	}
+
+	/* check if hw supports it */
+	temp = 0;
+	found = 0;
+	while (ccdc_dev->hw_ops.enum_pix(&pix, temp) >= 0) {
+		if (vpfe_pix_fmt->fmtdesc.pixelformat == pix) {
+			found = 1;
+			break;
+		}
+		temp++;
+	}
+
+	if (!found) {
+		/* use current pixel format */
+		pixfmt->pixelformat = vpfe_dev->fmt.fmt.pix.pixelformat;
+		/*
+		 * Since this is currently used in the vpfe device, we
+		 * will find this pix format in the table
+		 */
+		vpfe_pix_fmt = vpfe_lookup_pix_format(pixfmt->pixelformat);
+	}
+
+	/* check what field format is supported */
+	if (pixfmt->field == V4L2_FIELD_ANY) {
+		/* if field is any, use current value as default */
+		pixfmt->field = vpfe_dev->fmt.fmt.pix.field;
+	}
+
+	/*
+	 * if field is not same as current field in the vpfe device
+	 * try matching the field with the sub device field
+	 */
+	if (vpfe_dev->fmt.fmt.pix.field != pixfmt->field) {
+		/*
+		 * If field value is not in the supported fields, use current
+		 * field used in the device as default
+		 */
+		switch (pixfmt->field) {
+		case V4L2_FIELD_INTERLACED:
+		case V4L2_FIELD_SEQ_TB:
+			/* if sub device is supporting progressive, use that */
+			if (!vpfe_dev->std_info.frame_format)
+				pixfmt->field = V4L2_FIELD_NONE;
+			break;
+		case V4L2_FIELD_NONE:
+			if (vpfe_dev->std_info.frame_format)
+				pixfmt->field = V4L2_FIELD_INTERLACED;
+			break;
+
+		default:
+			/* use current field as default */
+			pixfmt->field = vpfe_dev->fmt.fmt.pix.field;
+			break;
+		}
+	}
+
+	/* Now adjust image resolutions supported */
+	if (pixfmt->field == V4L2_FIELD_INTERLACED ||
+	    pixfmt->field == V4L2_FIELD_SEQ_TB)
+		min_height = 2;
+
+	max_width = vpfe_dev->std_info.active_pixels;
+	max_height = vpfe_dev->std_info.active_lines;
+	min_width /= vpfe_pix_fmt->bpp;
+
+	v4l2_info(&vpfe_dev->v4l2_dev, "width = %d, height = %d, bpp = %d\n",
+		  pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp);
+
+	pixfmt->width = clamp((pixfmt->width), min_width, max_width);
+	pixfmt->height = clamp((pixfmt->height), min_height, max_height);
+
+	/* If interlaced, adjust height to be a multiple of 2 */
+	if (pixfmt->field == V4L2_FIELD_INTERLACED)
+		pixfmt->height &= (~1);
+	/*
+	 * recalculate bytesperline and sizeimage since width
+	 * and height might have changed
+	 */
+	pixfmt->bytesperline = (((pixfmt->width * vpfe_pix_fmt->bpp) + 31)
+				& ~31);
+	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
+		pixfmt->sizeimage =
+			pixfmt->bytesperline * pixfmt->height +
+			((pixfmt->bytesperline * pixfmt->height) >> 1);
+	else
+		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
+
+	v4l2_info(&vpfe_dev->v4l2_dev, "adjusted width = %d, height ="
+		 " %d, bpp = %d, bytesperline = %d, sizeimage = %d\n",
+		 pixfmt->width, pixfmt->height, vpfe_pix_fmt->bpp,
+		 pixfmt->bytesperline, pixfmt->sizeimage);
+	return vpfe_pix_fmt;
+}
+
+static int vpfe_querycap(struct file *file, void  *priv,
+			       struct v4l2_capability *cap)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querycap\n");
+
+	cap->version = VPFE_CAPTURE_VERSION_CODE;
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
+	strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver));
+	strlcpy(cap->bus_info, "VPFE", sizeof(cap->bus_info));
+	strlcpy(cap->card, vpfe_dev->cfg->card_name, sizeof(cap->card));
+	return 0;
+}
+
+static int vpfe_g_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_fmt_vid_cap\n");
+	/* Fill in the information about format */
+	*fmt = vpfe_dev->fmt;
+	return ret;
+}
+
+static int vpfe_enum_fmt_vid_cap(struct file *file, void  *priv,
+				   struct v4l2_fmtdesc *fmt)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	const struct vpfe_pixel_format *pix_fmt;
+	int temp_index;
+	u32 pix;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt_vid_cap\n");
+
+	if (ccdc_dev->hw_ops.enum_pix(&pix, fmt->index) < 0)
+		return -EINVAL;
+
+	/* Fill in the information about format */
+	pix_fmt = vpfe_lookup_pix_format(pix);
+	if (NULL != pix_fmt) {
+		temp_index = fmt->index;
+		*fmt = pix_fmt->fmtdesc;
+		fmt->index = temp_index;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int vpfe_s_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *fmt)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	const struct vpfe_pixel_format *pix_fmts;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt_vid_cap\n");
+
+	/* If streaming is started, return error */
+	if (vpfe_dev->started) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is started\n");
+		return -EBUSY;
+	}
+
+	/* Check for valid frame format */
+	pix_fmts = vpfe_check_format(vpfe_dev, &fmt->fmt.pix);
+
+	if (NULL == pix_fmts)
+		return -EINVAL;
+
+	/* store the pixel format in the device  object */
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	/* First detach any IRQ if currently attached */
+	vpfe_detach_irq(vpfe_dev);
+	vpfe_dev->fmt = *fmt;
+	/* set image capture parameters in the ccdc */
+	ret = vpfe_config_ccdc_image_format(vpfe_dev);
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_try_fmt_vid_cap(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	const struct vpfe_pixel_format *pix_fmts;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt_vid_cap\n");
+
+	pix_fmts = vpfe_check_format(vpfe_dev, &f->fmt.pix);
+	if (NULL == pix_fmts)
+		return -EINVAL;
+	return 0;
+}
+
+/*
+ * vpfe_get_subdev_input_index - Get subdev index and subdev input index for a
+ * given app input index
+ */
+static int vpfe_get_subdev_input_index(struct vpfe_device *vpfe_dev,
+					int *subdev_index,
+					int *subdev_input_index,
+					int app_input_index)
+{
+	struct vpfe_config *cfg = vpfe_dev->cfg;
+	struct vpfe_subdev_info *sdinfo;
+	int i, j = 0;
+
+	for (i = 0; i < cfg->num_subdevs; i++) {
+		sdinfo = &cfg->sub_devs[i];
+		if (app_input_index < (j + sdinfo->num_inputs)) {
+			*subdev_index = i;
+			*subdev_input_index = app_input_index - j;
+			return 0;
+		}
+		j += sdinfo->num_inputs;
+	}
+	return -EINVAL;
+}
+
+/*
+ * vpfe_get_app_input - Get app input index for a given subdev input index
+ * driver stores the input index of the current sub device and translate it
+ * when application request the current input
+ */
+static int vpfe_get_app_input_index(struct vpfe_device *vpfe_dev,
+				    int *app_input_index)
+{
+	struct vpfe_config *cfg = vpfe_dev->cfg;
+	struct vpfe_subdev_info *sdinfo;
+	int i, j = 0;
+
+	for (i = 0; i < cfg->num_subdevs; i++) {
+		sdinfo = &cfg->sub_devs[i];
+		if (!strcmp(sdinfo->name, vpfe_dev->current_subdev->name)) {
+			if (vpfe_dev->current_input >= sdinfo->num_inputs)
+				return -1;
+			*app_input_index = j + vpfe_dev->current_input;
+			return 0;
+		}
+		j += sdinfo->num_inputs;
+	}
+	return -EINVAL;
+}
+
+static int vpfe_enum_input(struct file *file, void *priv,
+				 struct v4l2_input *inp)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *sdinfo;
+	int subdev, index ;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_input\n");
+
+	if (vpfe_get_subdev_input_index(vpfe_dev,
+					&subdev,
+					&index,
+					inp->index) < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "input information not found"
+			 " for the subdev\n");
+		return -EINVAL;
+	}
+	sdinfo = &vpfe_dev->cfg->sub_devs[subdev];
+	memcpy(inp, &sdinfo->inputs[index], sizeof(struct v4l2_input));
+	return 0;
+}
+
+static int vpfe_g_input(struct file *file, void *priv, unsigned int *index)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_input\n");
+
+	return vpfe_get_app_input_index(vpfe_dev, index);
+}
+
+
+static int vpfe_s_input(struct file *file, void *priv, unsigned int index)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *sdinfo;
+	int subdev_index, inp_index;
+	struct vpfe_route *route;
+	u32 input = 0, output = 0;
+	int ret = -EINVAL;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n");
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	/*
+	 * If streaming is started return device busy
+	 * error
+	 */
+	if (vpfe_dev->started) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Streaming is on\n");
+		ret = -EBUSY;
+		goto unlock_out;
+	}
+
+	if (vpfe_get_subdev_input_index(vpfe_dev,
+					&subdev_index,
+					&inp_index,
+					index) < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "invalid input index\n");
+		goto unlock_out;
+	}
+
+	sdinfo = &vpfe_dev->cfg->sub_devs[subdev_index];
+	route = &sdinfo->routes[inp_index];
+	if (route && sdinfo->can_route) {
+		input = route->input;
+		output = route->output;
+	}
+
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+					 video, s_routing, input, output, 0);
+
+	if (ret) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"vpfe_doioctl:error in setting input in decoder\n");
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+	vpfe_dev->current_subdev = sdinfo;
+	vpfe_dev->current_input = index;
+	vpfe_dev->std_index = 0;
+
+	/* set the bus/interface parameter for the sub device in ccdc */
+	ret = ccdc_dev->hw_ops.set_hw_if_params(&sdinfo->ccdc_if_params);
+	if (ret)
+		goto unlock_out;
+
+	/* set the default image parameters in the device */
+	ret = vpfe_config_image_format(vpfe_dev,
+				&vpfe_standards[vpfe_dev->std_index].std_id);
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_querystd(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *sdinfo;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querystd\n");
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	sdinfo = vpfe_dev->current_subdev;
+	if (ret)
+		return ret;
+	/* Call querystd function of decoder device */
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+					 video, querystd, std_id);
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_subdev_info *sdinfo;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n");
+
+	/* Call decoder driver function to set the standard */
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	sdinfo = vpfe_dev->current_subdev;
+	/* If streaming is started, return device busy error */
+	if (vpfe_dev->started) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "streaming is started\n");
+		ret = -EBUSY;
+		goto unlock_out;
+	}
+
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+					 core, s_std, *std_id);
+	if (ret < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Failed to set standard\n");
+		goto unlock_out;
+	}
+	ret = vpfe_config_image_format(vpfe_dev, std_id);
+
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_g_std(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_std\n");
+
+	*std_id = vpfe_standards[vpfe_dev->std_index].std_id;
+	return 0;
+}
+/*
+ *  Videobuf operations
+ */
+static int vpfe_videobuf_setup(struct videobuf_queue *vq,
+				unsigned int *count,
+				unsigned int *size)
+{
+	struct vpfe_fh *fh = vq->priv_data;
+	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_setup\n");
+	*size = config_params.device_bufsize;
+
+	if (*count < config_params.min_numbuffers)
+		*count = config_params.min_numbuffers;
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+		"count=%d, size=%d\n", *count, *size);
+	return 0;
+}
+
+static int vpfe_videobuf_prepare(struct videobuf_queue *vq,
+				struct videobuf_buffer *vb,
+				enum v4l2_field field)
+{
+	struct vpfe_fh *fh = vq->priv_data;
+	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_prepare\n");
+
+	/* If buffer is not initialized, initialize it */
+	if (VIDEOBUF_NEEDS_INIT == vb->state) {
+		vb->width = vpfe_dev->fmt.fmt.pix.width;
+		vb->height = vpfe_dev->fmt.fmt.pix.height;
+		vb->size = vpfe_dev->fmt.fmt.pix.sizeimage;
+		vb->field = field;
+	}
+	vb->state = VIDEOBUF_PREPARED;
+	return 0;
+}
+
+static void vpfe_videobuf_queue(struct videobuf_queue *vq,
+				struct videobuf_buffer *vb)
+{
+	/* Get the file handle object and device object */
+	struct vpfe_fh *fh = vq->priv_data;
+	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
+	unsigned long flags;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_buffer_queue\n");
+
+	/* add the buffer to the DMA queue */
+	spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags);
+	list_add_tail(&vb->queue, &vpfe_dev->dma_queue);
+	spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags);
+
+	/* Change state of the buffer */
+	vb->state = VIDEOBUF_QUEUED;
+}
+
+static void vpfe_videobuf_release(struct videobuf_queue *vq,
+				  struct videobuf_buffer *vb)
+{
+	struct vpfe_fh *fh = vq->priv_data;
+	struct vpfe_device *vpfe_dev = fh->vpfe_dev;
+	unsigned long flags;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_videobuf_release\n");
+
+	/*
+	 * We need to flush the buffer from the dma queue since
+	 * they are de-allocated
+	 */
+	spin_lock_irqsave(&vpfe_dev->dma_queue_lock, flags);
+	INIT_LIST_HEAD(&vpfe_dev->dma_queue);
+	spin_unlock_irqrestore(&vpfe_dev->dma_queue_lock, flags);
+	videobuf_dma_contig_free(vq, vb);
+	vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static struct videobuf_queue_ops vpfe_videobuf_qops = {
+	.buf_setup      = vpfe_videobuf_setup,
+	.buf_prepare    = vpfe_videobuf_prepare,
+	.buf_queue      = vpfe_videobuf_queue,
+	.buf_release    = vpfe_videobuf_release,
+};
+
+/*
+ * vpfe_reqbufs. currently support REQBUF only once opening
+ * the device.
+ */
+static int vpfe_reqbufs(struct file *file, void *priv,
+			struct v4l2_requestbuffers *req_buf)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != req_buf->type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buffer type\n");
+		return -EINVAL;
+	}
+
+	if (V4L2_MEMORY_USERPTR == req_buf->memory) {
+		/* we don't support user ptr IO */
+		v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_reqbufs:"
+			 " USERPTR IO not supported\n");
+		return  -EINVAL;
+	}
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	if (vpfe_dev->io_usrs != 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n");
+		ret = -EBUSY;
+		goto unlock_out;
+	}
+
+	vpfe_dev->memory = req_buf->memory;
+	videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue,
+				&vpfe_videobuf_qops,
+				NULL,
+				&vpfe_dev->irqlock,
+				req_buf->type,
+				vpfe_dev->fmt.fmt.pix.field,
+				sizeof(struct videobuf_buffer),
+				fh);
+
+	fh->io_allowed = 1;
+	vpfe_dev->io_usrs = 1;
+	INIT_LIST_HEAD(&vpfe_dev->dma_queue);
+	ret = videobuf_reqbufs(&vpfe_dev->buffer_queue, req_buf);
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_querybuf(struct file *file, void *priv,
+			 struct v4l2_buffer *buf)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_querybuf\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return  -EINVAL;
+	}
+
+	if (vpfe_dev->memory != V4L2_MEMORY_MMAP) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid memory\n");
+		return -EINVAL;
+	}
+	/* Call videobuf_querybuf to get information */
+	return videobuf_querybuf(&vpfe_dev->buffer_queue, buf);
+}
+
+static int vpfe_qbuf(struct file *file, void *priv,
+		     struct v4l2_buffer *p)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_qbuf\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != p->type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * If this file handle is not allowed to do IO,
+	 * return error
+	 */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
+		return -EACCES;
+	}
+	return videobuf_qbuf(&vpfe_dev->buffer_queue, p);
+}
+
+static int vpfe_dqbuf(struct file *file, void *priv,
+		      struct v4l2_buffer *buf)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_dqbuf\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf->type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+	return videobuf_dqbuf(&vpfe_dev->buffer_queue,
+				      buf, file->f_flags & O_NONBLOCK);
+}
+
+/*
+ * vpfe_calculate_offsets : This function calculates buffers offset
+ * for top and bottom field
+ */
+static void vpfe_calculate_offsets(struct vpfe_device *vpfe_dev)
+{
+	struct v4l2_rect image_win;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_calculate_offsets\n");
+
+	ccdc_dev->hw_ops.get_image_window(&image_win);
+	vpfe_dev->field_off = image_win.height * image_win.width;
+}
+
+/* vpfe_start_ccdc_capture: start streaming in ccdc/isif */
+static void vpfe_start_ccdc_capture(struct vpfe_device *vpfe_dev)
+{
+	ccdc_dev->hw_ops.enable(1);
+	if (ccdc_dev->hw_ops.enable_out_to_sdram)
+		ccdc_dev->hw_ops.enable_out_to_sdram(1);
+	vpfe_dev->started = 1;
+}
+
+/*
+ * vpfe_streamon. Assume the DMA queue is not empty.
+ * application is expected to call QBUF before calling
+ * this ioctl. If not, driver returns error
+ */
+static int vpfe_streamon(struct file *file, void *priv,
+			 enum v4l2_buf_type buf_type)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+	struct vpfe_subdev_info *sdinfo;
+	unsigned long addr;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamon\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+
+	/* If file handle is not allowed IO, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
+		return -EACCES;
+	}
+
+	sdinfo = vpfe_dev->current_subdev;
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+					video, s_stream, 1);
+
+	if (ret && (ret != -ENOIOCTLCMD)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "stream on failed in subdev\n");
+		return -EINVAL;
+	}
+
+	/* If buffer queue is empty, return error */
+	if (list_empty(&vpfe_dev->buffer_queue.stream)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "buffer queue is empty\n");
+		return -EIO;
+	}
+
+	/* Call videobuf_streamon to start streaming * in videobuf */
+	ret = videobuf_streamon(&vpfe_dev->buffer_queue);
+	if (ret)
+		return ret;
+
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		goto streamoff;
+	/* Get the next frame from the buffer queue */
+	vpfe_dev->next_frm = list_entry(vpfe_dev->dma_queue.next,
+					struct videobuf_buffer, queue);
+	vpfe_dev->cur_frm = vpfe_dev->next_frm;
+	/* Remove buffer from the buffer queue */
+	list_del(&vpfe_dev->cur_frm->queue);
+	/* Mark state of the current frame to active */
+	vpfe_dev->cur_frm->state = VIDEOBUF_ACTIVE;
+	/* Initialize field_id and started member */
+	vpfe_dev->field_id = 0;
+	addr = videobuf_to_dma_contig(vpfe_dev->cur_frm);
+
+	/* Calculate field offset */
+	vpfe_calculate_offsets(vpfe_dev);
+
+	if (vpfe_attach_irq(vpfe_dev) < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			 "Error in attaching interrupt handle\n");
+		ret = -EFAULT;
+		goto unlock_out;
+	}
+	if (ccdc_dev->hw_ops.configure() < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			 "Error in configuring ccdc\n");
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+	ccdc_dev->hw_ops.setfbaddr((unsigned long)(addr));
+	vpfe_start_ccdc_capture(vpfe_dev);
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+streamoff:
+	ret = videobuf_streamoff(&vpfe_dev->buffer_queue);
+	return ret;
+}
+
+static int vpfe_streamoff(struct file *file, void *priv,
+			  enum v4l2_buf_type buf_type)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	struct vpfe_fh *fh = file->private_data;
+	struct vpfe_subdev_info *sdinfo;
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_streamoff\n");
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != buf_type) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Invalid buf type\n");
+		return -EINVAL;
+	}
+
+	/* If io is allowed for this file handle, return error */
+	if (!fh->io_allowed) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "fh->io_allowed\n");
+		return -EACCES;
+	}
+
+	/* If streaming is not started, return error */
+	if (!vpfe_dev->started) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "device started\n");
+		return -EINVAL;
+	}
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	vpfe_stop_ccdc_capture(vpfe_dev);
+	vpfe_detach_irq(vpfe_dev);
+
+	sdinfo = vpfe_dev->current_subdev;
+	ret = v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+					video, s_stream, 0);
+
+	if (ret && (ret != -ENOIOCTLCMD))
+		v4l2_err(&vpfe_dev->v4l2_dev, "stream off failed in subdev\n");
+	ret = videobuf_streamoff(&vpfe_dev->buffer_queue);
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+static int vpfe_cropcap(struct file *file, void *priv,
+			      struct v4l2_cropcap *crop)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_cropcap\n");
+
+	if (vpfe_dev->std_index > ARRAY_SIZE(vpfe_standards))
+		return -EINVAL;
+
+	memset(crop, 0, sizeof(struct v4l2_cropcap));
+	crop->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	crop->bounds.width = crop->defrect.width =
+		vpfe_standards[vpfe_dev->std_index].width;
+	crop->bounds.height = crop->defrect.height =
+		vpfe_standards[vpfe_dev->std_index].height;
+	crop->pixelaspect = vpfe_standards[vpfe_dev->std_index].pixelaspect;
+	return 0;
+}
+
+static int vpfe_g_crop(struct file *file, void *priv,
+			     struct v4l2_crop *crop)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_g_crop\n");
+
+	crop->c = vpfe_dev->crop;
+	return 0;
+}
+
+static int vpfe_s_crop(struct file *file, void *priv,
+			     struct v4l2_crop *crop)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_crop\n");
+
+	if (vpfe_dev->started) {
+		/* make sure streaming is not started */
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"Cannot change crop when streaming is ON\n");
+		return -EBUSY;
+	}
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	if (crop->c.top < 0 || crop->c.left < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"doesn't support negative values for top & left\n");
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+
+	/* adjust the width to 16 pixel boundry */
+	crop->c.width = ((crop->c.width + 15) & ~0xf);
+
+	/* make sure parameters are valid */
+	if ((crop->c.left + crop->c.width >
+		vpfe_dev->std_info.active_pixels) ||
+	    (crop->c.top + crop->c.height >
+		vpfe_dev->std_info.active_lines)) {
+		v4l2_err(&vpfe_dev->v4l2_dev, "Error in S_CROP params\n");
+		ret = -EINVAL;
+		goto unlock_out;
+	}
+	ccdc_dev->hw_ops.set_image_window(&crop->c);
+	vpfe_dev->fmt.fmt.pix.width = crop->c.width;
+	vpfe_dev->fmt.fmt.pix.height = crop->c.height;
+	vpfe_dev->fmt.fmt.pix.bytesperline =
+		ccdc_dev->hw_ops.get_line_length();
+	vpfe_dev->fmt.fmt.pix.sizeimage =
+		vpfe_dev->fmt.fmt.pix.bytesperline *
+		vpfe_dev->fmt.fmt.pix.height;
+	vpfe_dev->crop = crop->c;
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+
+static long vpfe_param_handler(struct file *file, void *priv,
+		int cmd, void *param)
+{
+	struct vpfe_device *vpfe_dev = video_drvdata(file);
+	int ret = 0;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n");
+
+	if (vpfe_dev->started) {
+		/* only allowed if streaming is not started */
+		v4l2_err(&vpfe_dev->v4l2_dev, "device already started\n");
+		return -EBUSY;
+	}
+
+	ret = mutex_lock_interruptible(&vpfe_dev->lock);
+	if (ret)
+		return ret;
+
+	switch (cmd) {
+	case VPFE_CMD_S_CCDC_RAW_PARAMS:
+		v4l2_warn(&vpfe_dev->v4l2_dev,
+			  "VPFE_CMD_S_CCDC_RAW_PARAMS: experimental ioctl\n");
+		ret = ccdc_dev->hw_ops.set_params(param);
+		if (ret) {
+			v4l2_err(&vpfe_dev->v4l2_dev,
+				"Error in setting parameters in CCDC\n");
+			goto unlock_out;
+		}
+		if (vpfe_get_ccdc_image_format(vpfe_dev, &vpfe_dev->fmt) < 0) {
+			v4l2_err(&vpfe_dev->v4l2_dev,
+				"Invalid image format at CCDC\n");
+			goto unlock_out;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+	}
+unlock_out:
+	mutex_unlock(&vpfe_dev->lock);
+	return ret;
+}
+
+
+/* vpfe capture ioctl operations */
+static const struct v4l2_ioctl_ops vpfe_ioctl_ops = {
+	.vidioc_querycap	 = vpfe_querycap,
+	.vidioc_g_fmt_vid_cap    = vpfe_g_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_cap = vpfe_enum_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap    = vpfe_s_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap  = vpfe_try_fmt_vid_cap,
+	.vidioc_enum_input	 = vpfe_enum_input,
+	.vidioc_g_input		 = vpfe_g_input,
+	.vidioc_s_input		 = vpfe_s_input,
+	.vidioc_querystd	 = vpfe_querystd,
+	.vidioc_s_std		 = vpfe_s_std,
+	.vidioc_g_std		 = vpfe_g_std,
+	.vidioc_reqbufs		 = vpfe_reqbufs,
+	.vidioc_querybuf	 = vpfe_querybuf,
+	.vidioc_qbuf		 = vpfe_qbuf,
+	.vidioc_dqbuf		 = vpfe_dqbuf,
+	.vidioc_streamon	 = vpfe_streamon,
+	.vidioc_streamoff	 = vpfe_streamoff,
+	.vidioc_cropcap		 = vpfe_cropcap,
+	.vidioc_g_crop		 = vpfe_g_crop,
+	.vidioc_s_crop		 = vpfe_s_crop,
+	.vidioc_default		 = vpfe_param_handler,
+};
+
+static struct vpfe_device *vpfe_initialize(void)
+{
+	struct vpfe_device *vpfe_dev;
+
+	/* Default number of buffers should be 3 */
+	if ((numbuffers > 0) &&
+	    (numbuffers < config_params.min_numbuffers))
+		numbuffers = config_params.min_numbuffers;
+
+	/*
+	 * Set buffer size to min buffers size if invalid buffer size is
+	 * given
+	 */
+	if (bufsize < config_params.min_bufsize)
+		bufsize = config_params.min_bufsize;
+
+	config_params.numbuffers = numbuffers;
+
+	if (numbuffers)
+		config_params.device_bufsize = bufsize;
+
+	/* Allocate memory for device objects */
+	vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL);
+
+	return vpfe_dev;
+}
+
+static void vpfe_disable_clock(struct vpfe_device *vpfe_dev)
+{
+	struct vpfe_config *vpfe_cfg = vpfe_dev->cfg;
+
+	clk_disable(vpfe_cfg->vpssclk);
+	clk_put(vpfe_cfg->vpssclk);
+	clk_disable(vpfe_cfg->slaveclk);
+	clk_put(vpfe_cfg->slaveclk);
+	v4l2_info(vpfe_dev->pdev->driver,
+		 "vpfe vpss master & slave clocks disabled\n");
+}
+
+static int vpfe_enable_clock(struct vpfe_device *vpfe_dev)
+{
+	struct vpfe_config *vpfe_cfg = vpfe_dev->cfg;
+	int ret = -ENOENT;
+
+	vpfe_cfg->vpssclk = clk_get(vpfe_dev->pdev, "vpss_master");
+	if (NULL == vpfe_cfg->vpssclk) {
+		v4l2_err(vpfe_dev->pdev->driver, "No clock defined for"
+			 "vpss_master\n");
+		return ret;
+	}
+
+	if (clk_enable(vpfe_cfg->vpssclk)) {
+		v4l2_err(vpfe_dev->pdev->driver,
+			"vpfe vpss master clock not enabled\n");
+		goto out;
+	}
+	v4l2_info(vpfe_dev->pdev->driver,
+		 "vpfe vpss master clock enabled\n");
+
+	vpfe_cfg->slaveclk = clk_get(vpfe_dev->pdev, "vpss_slave");
+	if (NULL == vpfe_cfg->slaveclk) {
+		v4l2_err(vpfe_dev->pdev->driver,
+			"No clock defined for vpss slave\n");
+		goto out;
+	}
+
+	if (clk_enable(vpfe_cfg->slaveclk)) {
+		v4l2_err(vpfe_dev->pdev->driver,
+			 "vpfe vpss slave clock not enabled\n");
+		goto out;
+	}
+	v4l2_info(vpfe_dev->pdev->driver, "vpfe vpss slave clock enabled\n");
+	return 0;
+out:
+	if (vpfe_cfg->vpssclk)
+		clk_put(vpfe_cfg->vpssclk);
+	if (vpfe_cfg->slaveclk)
+		clk_put(vpfe_cfg->slaveclk);
+
+	return -1;
+}
+
+/*
+ * vpfe_probe : This function creates device entries by register
+ * itself to the V4L2 driver and initializes fields of each
+ * device objects
+ */
+static __init int vpfe_probe(struct platform_device *pdev)
+{
+	struct vpfe_subdev_info *sdinfo;
+	struct vpfe_config *vpfe_cfg;
+	struct resource *res1;
+	struct vpfe_device *vpfe_dev;
+	struct i2c_adapter *i2c_adap;
+	struct video_device *vfd;
+	int ret = -ENOMEM, i, j;
+	int num_subdevs = 0;
+
+	/* Get the pointer to the device object */
+	vpfe_dev = vpfe_initialize();
+
+	if (!vpfe_dev) {
+		v4l2_err(pdev->dev.driver,
+			"Failed to allocate memory for vpfe_dev\n");
+		return ret;
+	}
+
+	vpfe_dev->pdev = &pdev->dev;
+
+	if (NULL == pdev->dev.platform_data) {
+		v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n");
+		ret = -ENOENT;
+		goto probe_free_dev_mem;
+	}
+
+	vpfe_cfg = pdev->dev.platform_data;
+	vpfe_dev->cfg = vpfe_cfg;
+	if (NULL == vpfe_cfg->ccdc ||
+	    NULL == vpfe_cfg->card_name ||
+	    NULL == vpfe_cfg->sub_devs) {
+		v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n");
+		ret = -ENOENT;
+		goto probe_free_dev_mem;
+	}
+
+	/* enable vpss clocks */
+	ret = vpfe_enable_clock(vpfe_dev);
+	if (ret)
+		goto probe_free_dev_mem;
+
+	mutex_lock(&ccdc_lock);
+	/* Allocate memory for ccdc configuration */
+	ccdc_cfg = kmalloc(sizeof(struct ccdc_config), GFP_KERNEL);
+	if (NULL == ccdc_cfg) {
+		v4l2_err(pdev->dev.driver,
+			 "Memory allocation failed for ccdc_cfg\n");
+		goto probe_disable_clock;
+	}
+
+	strncpy(ccdc_cfg->name, vpfe_cfg->ccdc, 32);
+	/* Get VINT0 irq resource */
+	res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res1) {
+		v4l2_err(pdev->dev.driver,
+			 "Unable to get interrupt for VINT0\n");
+		ret = -ENOENT;
+		goto probe_disable_clock;
+	}
+	vpfe_dev->ccdc_irq0 = res1->start;
+
+	/* Get VINT1 irq resource */
+	res1 = platform_get_resource(pdev,
+				IORESOURCE_IRQ, 1);
+	if (!res1) {
+		v4l2_err(pdev->dev.driver,
+			 "Unable to get interrupt for VINT1\n");
+		ret = -ENOENT;
+		goto probe_disable_clock;
+	}
+	vpfe_dev->ccdc_irq1 = res1->start;
+
+	/* Get address base of CCDC */
+	res1 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res1) {
+		v4l2_err(pdev->dev.driver,
+			"Unable to get register address map\n");
+		ret = -ENOENT;
+		goto probe_disable_clock;
+	}
+
+	ccdc_cfg->ccdc_addr_size = res1->end - res1->start + 1;
+	if (!request_mem_region(res1->start, ccdc_cfg->ccdc_addr_size,
+				pdev->dev.driver->name)) {
+		v4l2_err(pdev->dev.driver,
+			"Failed request_mem_region for ccdc base\n");
+		ret = -ENXIO;
+		goto probe_disable_clock;
+	}
+	ccdc_cfg->ccdc_addr = ioremap_nocache(res1->start,
+					     ccdc_cfg->ccdc_addr_size);
+	if (!ccdc_cfg->ccdc_addr) {
+		v4l2_err(pdev->dev.driver, "Unable to ioremap ccdc addr\n");
+		ret = -ENXIO;
+		goto probe_out_release_mem1;
+	}
+
+	ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, IRQF_DISABLED,
+			  "vpfe_capture0", vpfe_dev);
+
+	if (0 != ret) {
+		v4l2_err(pdev->dev.driver, "Unable to request interrupt\n");
+		goto probe_out_unmap1;
+	}
+
+	/* Allocate memory for video device */
+	vfd = video_device_alloc();
+	if (NULL == vfd) {
+		ret = -ENOMEM;
+		v4l2_err(pdev->dev.driver,
+			"Unable to alloc video device\n");
+		goto probe_out_release_irq;
+	}
+
+	/* Initialize field of video device */
+	vfd->release		= video_device_release;
+	vfd->fops		= &vpfe_fops;
+	vfd->ioctl_ops		= &vpfe_ioctl_ops;
+	vfd->minor		= -1;
+	vfd->tvnorms		= 0;
+	vfd->current_norm	= V4L2_STD_PAL;
+	vfd->v4l2_dev 		= &vpfe_dev->v4l2_dev;
+	snprintf(vfd->name, sizeof(vfd->name),
+		 "%s_V%d.%d.%d",
+		 CAPTURE_DRV_NAME,
+		 (VPFE_CAPTURE_VERSION_CODE >> 16) & 0xff,
+		 (VPFE_CAPTURE_VERSION_CODE >> 8) & 0xff,
+		 (VPFE_CAPTURE_VERSION_CODE) & 0xff);
+	/* Set video_dev to the video device */
+	vpfe_dev->video_dev	= vfd;
+
+	ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev);
+	if (ret) {
+		v4l2_err(pdev->dev.driver,
+			"Unable to register v4l2 device.\n");
+		goto probe_out_video_release;
+	}
+	v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n");
+	spin_lock_init(&vpfe_dev->irqlock);
+	spin_lock_init(&vpfe_dev->dma_queue_lock);
+	mutex_init(&vpfe_dev->lock);
+
+	/* Initialize field of the device objects */
+	vpfe_dev->numbuffers = config_params.numbuffers;
+
+	/* Initialize prio member of device object */
+	v4l2_prio_init(&vpfe_dev->prio);
+	/* register video device */
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+		"trying to register vpfe device.\n");
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+		"video_dev=%x\n", (int)&vpfe_dev->video_dev);
+	vpfe_dev->fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	ret = video_register_device(vpfe_dev->video_dev,
+				    VFL_TYPE_GRABBER, -1);
+
+	if (ret) {
+		v4l2_err(pdev->dev.driver,
+			"Unable to register video device.\n");
+		goto probe_out_v4l2_unregister;
+	}
+
+	v4l2_info(&vpfe_dev->v4l2_dev, "video device registered\n");
+	/* set the driver data in platform device */
+	platform_set_drvdata(pdev, vpfe_dev);
+	/* set driver private data */
+	video_set_drvdata(vpfe_dev->video_dev, vpfe_dev);
+	i2c_adap = i2c_get_adapter(1);
+	vpfe_cfg = pdev->dev.platform_data;
+	num_subdevs = vpfe_cfg->num_subdevs;
+	vpfe_dev->sd = kmalloc(sizeof(struct v4l2_subdev *) * num_subdevs,
+				GFP_KERNEL);
+	if (NULL == vpfe_dev->sd) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"unable to allocate memory for subdevice pointers\n");
+		ret = -ENOMEM;
+		goto probe_out_video_unregister;
+	}
+
+	for (i = 0; i < num_subdevs; i++) {
+		struct v4l2_input *inps;
+
+		sdinfo = &vpfe_cfg->sub_devs[i];
+
+		/* Load up the subdevice */
+		vpfe_dev->sd[i] =
+			v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev,
+						  i2c_adap,
+						  sdinfo->name,
+						  &sdinfo->board_info,
+						  NULL);
+		if (vpfe_dev->sd[i]) {
+			v4l2_info(&vpfe_dev->v4l2_dev,
+				  "v4l2 sub device %s registered\n",
+				  sdinfo->name);
+			vpfe_dev->sd[i]->grp_id = sdinfo->grp_id;
+			/* update tvnorms from the sub devices */
+			for (j = 0; j < sdinfo->num_inputs; j++) {
+				inps = &sdinfo->inputs[j];
+				vfd->tvnorms |= inps->std;
+			}
+		} else {
+			v4l2_info(&vpfe_dev->v4l2_dev,
+				  "v4l2 sub device %s register fails\n",
+				  sdinfo->name);
+			goto probe_sd_out;
+		}
+	}
+
+	/* set first sub device as current one */
+	vpfe_dev->current_subdev = &vpfe_cfg->sub_devs[0];
+
+	/* We have at least one sub device to work with */
+	mutex_unlock(&ccdc_lock);
+	return 0;
+
+probe_sd_out:
+	kfree(vpfe_dev->sd);
+probe_out_video_unregister:
+	video_unregister_device(vpfe_dev->video_dev);
+probe_out_v4l2_unregister:
+	v4l2_device_unregister(&vpfe_dev->v4l2_dev);
+probe_out_video_release:
+	if (vpfe_dev->video_dev->minor == -1)
+		video_device_release(vpfe_dev->video_dev);
+probe_out_release_irq:
+	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
+probe_out_unmap1:
+	iounmap(ccdc_cfg->ccdc_addr);
+probe_out_release_mem1:
+	release_mem_region(res1->start, res1->end - res1->start + 1);
+probe_disable_clock:
+	vpfe_disable_clock(vpfe_dev);
+	mutex_unlock(&ccdc_lock);
+	kfree(ccdc_cfg);
+probe_free_dev_mem:
+	kfree(vpfe_dev);
+	return ret;
+}
+
+/*
+ * vpfe_remove : It un-register device from V4L2 driver
+ */
+static int vpfe_remove(struct platform_device *pdev)
+{
+	struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	v4l2_info(pdev->dev.driver, "vpfe_remove\n");
+
+	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
+	kfree(vpfe_dev->sd);
+	v4l2_device_unregister(&vpfe_dev->v4l2_dev);
+	video_unregister_device(vpfe_dev->video_dev);
+	mutex_lock(&ccdc_lock);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, res->end - res->start + 1);
+	iounmap(ccdc_cfg->ccdc_addr);
+	mutex_unlock(&ccdc_lock);
+	vpfe_disable_clock(vpfe_dev);
+	kfree(vpfe_dev);
+	kfree(ccdc_cfg);
+	return 0;
+}
+
+static int
+vpfe_suspend(struct device *dev)
+{
+	/* add suspend code here later */
+	return -1;
+}
+
+static int
+vpfe_resume(struct device *dev)
+{
+	/* add resume code here later */
+	return -1;
+}
+
+static struct dev_pm_ops vpfe_dev_pm_ops = {
+	.suspend = vpfe_suspend,
+	.resume = vpfe_resume,
+};
+
+static struct platform_driver vpfe_driver = {
+	.driver = {
+		.name = CAPTURE_DRV_NAME,
+		.owner = THIS_MODULE,
+		.pm = &vpfe_dev_pm_ops,
+	},
+	.probe = vpfe_probe,
+	.remove = __devexit_p(vpfe_remove),
+};
+
+static __init int vpfe_init(void)
+{
+	printk(KERN_NOTICE "vpfe_init\n");
+	/* Register driver to the kernel */
+	return platform_driver_register(&vpfe_driver);
+}
+
+/*
+ * vpfe_cleanup : This function un-registers device driver
+ */
+static void vpfe_cleanup(void)
+{
+	platform_driver_unregister(&vpfe_driver);
+}
+
+module_init(vpfe_init);
+module_exit(vpfe_cleanup);
diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h
new file mode 100644
index 0000000..71d8982
--- /dev/null
+++ b/include/media/davinci/vpfe_capture.h
@@ -0,0 +1,198 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _VPFE_CAPTURE_H
+#define _VPFE_CAPTURE_H
+
+#ifdef __KERNEL__
+
+/* Header files */
+#include <media/v4l2-dev.h>
+#include <linux/videodev2.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf-dma-contig.h>
+#include <media/davinci/vpfe_types.h>
+
+#define VPFE_CAPTURE_NUM_DECODERS        5
+
+/* Macros */
+#define VPFE_MAJOR_RELEASE              0
+#define VPFE_MINOR_RELEASE              0
+#define VPFE_BUILD                      1
+#define VPFE_CAPTURE_VERSION_CODE       ((VPFE_MAJOR_RELEASE << 16) | \
+					(VPFE_MINOR_RELEASE << 8)  | \
+					VPFE_BUILD)
+
+#define CAPTURE_DRV_NAME		"vpfe-capture"
+
+struct vpfe_pixel_format {
+	struct v4l2_fmtdesc fmtdesc;
+	/* bytes per pixel */
+	int bpp;
+};
+
+struct vpfe_std_info {
+	int active_pixels;
+	int active_lines;
+	/* current frame format */
+	int frame_format;
+};
+
+struct vpfe_route {
+	u32 input;
+	u32 output;
+};
+
+struct vpfe_subdev_info {
+	/* Sub device name */
+	char name[32];
+	/* Sub device group id */
+	int grp_id;
+	/* Number of inputs supported */
+	int num_inputs;
+	/* inputs available at the sub device */
+	struct v4l2_input *inputs;
+	/* Sub dev routing information for each input */
+	struct vpfe_route *routes;
+	/* check if sub dev supports routing */
+	int can_route;
+	/* ccdc bus/interface configuration */
+	struct vpfe_hw_if_param ccdc_if_params;
+	/* i2c subdevice board info */
+	struct i2c_board_info board_info;
+};
+
+struct vpfe_config {
+	/* Number of sub devices connected to vpfe */
+	int num_subdevs;
+	/* information about each subdev */
+	struct vpfe_subdev_info *sub_devs;
+	/* evm card info */
+	char *card_name;
+	/* ccdc name */
+	char *ccdc;
+	/* vpfe clock */
+	struct clk *vpssclk;
+	struct clk *slaveclk;
+};
+
+struct vpfe_device {
+	/* V4l2 specific parameters */
+	/* Identifies video device for this channel */
+	struct video_device *video_dev;
+	/* sub devices */
+	struct v4l2_subdev **sd;
+	/* vpfe cfg */
+	struct vpfe_config *cfg;
+	/* V4l2 device */
+	struct v4l2_device v4l2_dev;
+	/* parent device */
+	struct device *pdev;
+	/* Used to keep track of state of the priority */
+	struct v4l2_prio_state prio;
+	/* number of open instances of the channel */
+	u32 usrs;
+	/* Indicates id of the field which is being displayed */
+	u32 field_id;
+	/* flag to indicate whether decoder is initialized */
+	u8 initialized;
+	/* current interface type */
+	struct vpfe_hw_if_param vpfe_if_params;
+	/* ptr to currently selected sub device */
+	struct vpfe_subdev_info *current_subdev;
+	/* current input at the sub device */
+	int current_input;
+	/* Keeps track of the information about the standard */
+	struct vpfe_std_info std_info;
+	/* std index into std table */
+	int std_index;
+	/* CCDC IRQs used when CCDC/ISIF output to SDRAM */
+	unsigned int ccdc_irq0;
+	unsigned int ccdc_irq1;
+	/* number of buffers in fbuffers */
+	u32 numbuffers;
+	/* List of buffer pointers for storing frames */
+	u8 *fbuffers[VIDEO_MAX_FRAME];
+	/* Pointer pointing to current v4l2_buffer */
+	struct videobuf_buffer *cur_frm;
+	/* Pointer pointing to next v4l2_buffer */
+	struct videobuf_buffer *next_frm;
+	/*
+	 * This field keeps track of type of buffer exchange mechanism
+	 * user has selected
+	 */
+	enum v4l2_memory memory;
+	/* Used to store pixel format */
+	struct v4l2_format fmt;
+	/*
+	 * used when IMP is chained to store the crop window which
+	 * is different from the image window
+	 */
+	struct v4l2_rect crop;
+	/* Buffer queue used in video-buf */
+	struct videobuf_queue buffer_queue;
+	/* Queue of filled frames */
+	struct list_head dma_queue;
+	/* Used in video-buf */
+	spinlock_t irqlock;
+	/* IRQ lock for DMA queue */
+	spinlock_t dma_queue_lock;
+	/* lock used to access this structure */
+	struct mutex lock;
+	/* number of users performing IO */
+	u32 io_usrs;
+	/* Indicates whether streaming started */
+	u8 started;
+	/*
+	 * offset where second field starts from the starting of the
+	 * buffer for field seperated YCbCr formats
+	 */
+	u32 field_off;
+};
+
+/* File handle structure */
+struct vpfe_fh {
+	struct vpfe_device *vpfe_dev;
+	/* Indicates whether this file handle is doing IO */
+	u8 io_allowed;
+	/* Used to keep track priority of this instance */
+	enum v4l2_priority prio;
+};
+
+struct vpfe_config_params {
+	u8 min_numbuffers;
+	u8 numbuffers;
+	u32 min_bufsize;
+	u32 device_bufsize;
+};
+
+#endif				/* End of __KERNEL__ */
+/**
+ * VPFE_CMD_S_CCDC_RAW_PARAMS - EXPERIMENTAL IOCTL to set raw capture params
+ * This can be used to configure modules such as defect pixel correction,
+ * color space conversion, culling etc. This is an experimental ioctl that
+ * will change in future kernels. So use this ioctl with care !
+ * TODO: This is to be split into multiple ioctls and also explore the
+ * possibility of extending the v4l2 api to include this
+ **/
+#define VPFE_CMD_S_CCDC_RAW_PARAMS _IOW('V', BASE_VIDIOC_PRIVATE + 1, \
+					void *)
+#endif				/* _DAVINCI_VPFE_H */
diff --git a/include/media/davinci/vpfe_types.h b/include/media/davinci/vpfe_types.h
new file mode 100644
index 0000000..76fb74b
--- /dev/null
+++ b/include/media/davinci/vpfe_types.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option)any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _VPFE_TYPES_H
+#define _VPFE_TYPES_H
+
+#ifdef __KERNEL__
+
+enum vpfe_pin_pol {
+	VPFE_PINPOL_POSITIVE,
+	VPFE_PINPOL_NEGATIVE
+};
+
+enum vpfe_hw_if_type {
+	/* BT656 - 8 bit */
+	VPFE_BT656,
+	/* BT1120 - 16 bit */
+	VPFE_BT1120,
+	/* Raw Bayer */
+	VPFE_RAW_BAYER,
+	/* YCbCr - 8 bit with external sync */
+	VPFE_YCBCR_SYNC_8,
+	/* YCbCr - 16 bit with external sync */
+	VPFE_YCBCR_SYNC_16,
+	/* BT656 - 10 bit */
+	VPFE_BT656_10BIT
+};
+
+/* interface description */
+struct vpfe_hw_if_param {
+	enum vpfe_hw_if_type if_type;
+	enum vpfe_pin_pol hdpol;
+	enum vpfe_pin_pol vdpol;
+};
+
+#endif
+#endif