diff options
author | Vladislav Zolotarov <vladz@broadcom.com> | 2009-04-27 10:27:43 (GMT) |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2009-04-27 10:27:43 (GMT) |
commit | 94a78b79cb5f14c09a42522738d6694c6a1cdd20 (patch) | |
tree | 17bb6b92c16c91db0398baafa04996c958a8d494 | |
parent | ec9323f417e803f07a99a15a9cfb207662ad2c55 (diff) | |
download | linux-fsl-qoriq-94a78b79cb5f14c09a42522738d6694c6a1cdd20.tar.xz |
bnx2x: Separated FW from the source.
>From now on FW will be downloaded from the binary file using request_firmware.
There will be different files for every supported chip. Currently 57710 (e1) and
57711 (e1h).
File names have the following format: bnx2x-<chip version>-<FW version>.fw.
ihex versions of current FW files are submitted in the next patch.
Each binary file has a header in the following format:
struct bnx2x_fw_file_section {
__be32 len;
__be32 offset;
}
struct bnx2x_fw_file_hdr {
struct bnx2x_fw_file_section init_ops;
struct bnx2x_fw_file_section init_ops_offsets;
struct bnx2x_fw_file_section init_data;
struct bnx2x_fw_file_section tsem_int_table_data;
struct bnx2x_fw_file_section tsem_pram_data;
struct bnx2x_fw_file_section usem_int_table_data;
struct bnx2x_fw_file_section usem_pram_data;
struct bnx2x_fw_file_section csem_int_table_data;
struct bnx2x_fw_file_section csem_pram_data;
struct bnx2x_fw_file_section xsem_int_table_data;
struct bnx2x_fw_file_section xsem_pram_data;
struct bnx2x_fw_file_section fw_version;
}
Each bnx2x_fw_file_section contains the length and the offset of the appropriate
section in the binary file. Values are stored in the big endian format.
Data types of arrays:
init_data __be32
init_ops_offsets __be16
XXsem_pram_data u8
XXsem_int_table_data u8
init_ops struct raw_op {
u8 op;
__be24 offset;
__be32 data;
}
fw_version u8
>From now boundaries of a specific initialization stage are stored in
init_ops_offsets array instead of being defined by separate macroes. The index
in init_ops_offsets is calculated by BLOCK_OPS_IDX macro:
#define BLOCK_OPS_IDX(block, stage, end) \
(2*(((block)*STAGE_IDX_MAX) + (stage)) + (end))
Security:
In addition to sanity check of array boundaries bnx2x will check a FW version.
Additional checks might be added in the future.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r-- | drivers/net/Kconfig | 1 | ||||
-rw-r--r-- | drivers/net/bnx2x.h | 15 | ||||
-rw-r--r-- | drivers/net/bnx2x_fw_file_hdr.h | 37 | ||||
-rw-r--r-- | drivers/net/bnx2x_init.h | 605 | ||||
-rw-r--r-- | drivers/net/bnx2x_init_ops.h | 442 | ||||
-rw-r--r-- | drivers/net/bnx2x_main.c | 343 | ||||
-rw-r--r-- | firmware/Makefile | 1 | ||||
-rw-r--r-- | firmware/WHENCE | 20 |
8 files changed, 866 insertions, 598 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 3320e77..bc7eef1 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2676,6 +2676,7 @@ config TEHUTI config BNX2X tristate "Broadcom NetXtremeII 10Gb support" depends on PCI + select FW_LOADER select ZLIB_INFLATE select LIBCRC32C help diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index a329bee..8678457 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -965,6 +965,21 @@ struct bnx2x { int gunzip_outlen; #define FW_BUF_SIZE 0x8000 + struct raw_op *init_ops; + /* Init blocks offsets inside init_ops */ + u16 *init_ops_offsets; + /* Data blob - has 32 bit granularity */ + u32 *init_data; + /* Zipped PRAM blobs - raw data */ + const u8 *tsem_int_table_data; + const u8 *tsem_pram_data; + const u8 *usem_int_table_data; + const u8 *usem_pram_data; + const u8 *xsem_int_table_data; + const u8 *xsem_pram_data; + const u8 *csem_int_table_data; + const u8 *csem_pram_data; + const struct firmware *firmware; }; diff --git a/drivers/net/bnx2x_fw_file_hdr.h b/drivers/net/bnx2x_fw_file_hdr.h new file mode 100644 index 0000000..3f5ee5d --- /dev/null +++ b/drivers/net/bnx2x_fw_file_hdr.h @@ -0,0 +1,37 @@ +/* bnx2x_fw_file_hdr.h: FW binary file header structure. + * + * Copyright (c) 2007-2009 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Eilon Greenstein <eilong@broadcom.com> + * Written by: Vladislav Zolotarov <vladz@broadcom.com> + * Based on the original idea of John Wright <john.wright@hp.com>. + */ + +#ifndef BNX2X_INIT_FILE_HDR_H +#define BNX2X_INIT_FILE_HDR_H + +struct bnx2x_fw_file_section { + __be32 len; + __be32 offset; +}; + +struct bnx2x_fw_file_hdr { + struct bnx2x_fw_file_section init_ops; + struct bnx2x_fw_file_section init_ops_offsets; + struct bnx2x_fw_file_section init_data; + struct bnx2x_fw_file_section tsem_int_table_data; + struct bnx2x_fw_file_section tsem_pram_data; + struct bnx2x_fw_file_section usem_int_table_data; + struct bnx2x_fw_file_section usem_pram_data; + struct bnx2x_fw_file_section csem_int_table_data; + struct bnx2x_fw_file_section csem_pram_data; + struct bnx2x_fw_file_section xsem_int_table_data; + struct bnx2x_fw_file_section xsem_pram_data; + struct bnx2x_fw_file_section fw_version; +}; + +#endif /* BNX2X_INIT_FILE_HDR_H */ diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h index 39ba293..3ba4d88 100644 --- a/drivers/net/bnx2x_init.h +++ b/drivers/net/bnx2x_init.h @@ -1,4 +1,5 @@ /* bnx2x_init.h: Broadcom Everest network driver. + * Structures and macroes needed during the initialization. * * Copyright (c) 2007-2009 Broadcom Corporation * @@ -8,6 +9,7 @@ * * Maintained by: Eilon Greenstein <eilong@broadcom.com> * Written by: Eliezer Tamir + * Modified by: Vladislav Zolotarov <vladz@broadcom.com> */ #ifndef BNX2X_INIT_H @@ -45,33 +47,71 @@ #define OP_WR_64 0x8 /* write 64 bit pattern */ #define OP_WB 0x9 /* copy a string using DMAE */ -/* Operation specific for E1 */ -#define OP_RD_E1 0xa /* read single register */ -#define OP_WR_E1 0xb /* write single register */ -#define OP_IW_E1 0xc /* write single register using mailbox */ -#define OP_SW_E1 0xd /* copy a string to the device */ -#define OP_SI_E1 0xe /* copy a string using mailbox */ -#define OP_ZR_E1 0xf /* clear memory */ -#define OP_ZP_E1 0x10 /* unzip then copy with DMAE */ -#define OP_WR_64_E1 0x11 /* write 64 bit pattern on E1 */ -#define OP_WB_E1 0x12 /* copy a string using DMAE */ - -/* Operation specific for E1H */ -#define OP_RD_E1H 0x13 /* read single register */ -#define OP_WR_E1H 0x14 /* write single register */ -#define OP_IW_E1H 0x15 /* write single register using mailbox */ -#define OP_SW_E1H 0x16 /* copy a string to the device */ -#define OP_SI_E1H 0x17 /* copy a string using mailbox */ -#define OP_ZR_E1H 0x18 /* clear memory */ -#define OP_ZP_E1H 0x19 /* unzip then copy with DMAE */ -#define OP_WR_64_E1H 0x1a /* write 64 bit pattern on E1H */ -#define OP_WB_E1H 0x1b /* copy a string using DMAE */ - /* FPGA and EMUL specific operations */ -#define OP_WR_EMUL_E1H 0x1c /* write single register on E1H Emul */ -#define OP_WR_EMUL 0x1d /* write single register on Emulation */ -#define OP_WR_FPGA 0x1e /* write single register on FPGA */ -#define OP_WR_ASIC 0x1f /* write single register on ASIC */ +#define OP_WR_EMUL 0xa /* write single register on Emulation */ +#define OP_WR_FPGA 0xb /* write single register on FPGA */ +#define OP_WR_ASIC 0xc /* write single register on ASIC */ + +/* Init stages */ +#define COMMON_STAGE 0 +#define PORT0_STAGE 1 +#define PORT1_STAGE 2 +/* Never reorder FUNCx stages !!! */ +#define FUNC0_STAGE 3 +#define FUNC1_STAGE 4 +#define FUNC2_STAGE 5 +#define FUNC3_STAGE 6 +#define FUNC4_STAGE 7 +#define FUNC5_STAGE 8 +#define FUNC6_STAGE 9 +#define FUNC7_STAGE 10 +#define STAGE_IDX_MAX 11 + +#define STAGE_START 0 +#define STAGE_END 1 + + +/* Indices of blocks */ +#define PRS_BLOCK 0 +#define SRCH_BLOCK 1 +#define TSDM_BLOCK 2 +#define TCM_BLOCK 3 +#define BRB1_BLOCK 4 +#define TSEM_BLOCK 5 +#define PXPCS_BLOCK 6 +#define EMAC0_BLOCK 7 +#define EMAC1_BLOCK 8 +#define DBU_BLOCK 9 +#define MISC_BLOCK 10 +#define DBG_BLOCK 11 +#define NIG_BLOCK 12 +#define MCP_BLOCK 13 +#define UPB_BLOCK 14 +#define CSDM_BLOCK 15 +#define USDM_BLOCK 16 +#define CCM_BLOCK 17 +#define UCM_BLOCK 18 +#define USEM_BLOCK 19 +#define CSEM_BLOCK 20 +#define XPB_BLOCK 21 +#define DQ_BLOCK 22 +#define TIMERS_BLOCK 23 +#define XSDM_BLOCK 24 +#define QM_BLOCK 25 +#define PBF_BLOCK 26 +#define XCM_BLOCK 27 +#define XSEM_BLOCK 28 +#define CDU_BLOCK 29 +#define DMAE_BLOCK 30 +#define PXP_BLOCK 31 +#define CFC_BLOCK 32 +#define HC_BLOCK 33 +#define PXP2_BLOCK 34 +#define MISC_AEU_BLOCK 35 + +/* Returns the index of start or end of a specific block stage in ops array*/ +#define BLOCK_OPS_IDX(block, stage, end) \ + (2*(((block)*STAGE_IDX_MAX) + (stage)) + (end)) struct raw_op { @@ -118,292 +158,6 @@ union init_op { struct raw_op raw; }; -#include "bnx2x_init_values.h" - -static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val); -static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len); - -static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data, - u32 len) -{ - int i; - - for (i = 0; i < len; i++) { - REG_WR(bp, addr + i*4, data[i]); - if (!(i % 10000)) { - touch_softlockup_watchdog(); - cpu_relax(); - } - } -} - -static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data, - u16 len) -{ - int i; - - for (i = 0; i < len; i++) { - REG_WR_IND(bp, addr + i*4, data[i]); - if (!(i % 10000)) { - touch_softlockup_watchdog(); - cpu_relax(); - } - } -} - -static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len) -{ - int offset = 0; - - if (bp->dmae_ready) { - while (len > DMAE_LEN32_WR_MAX) { - bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, - addr + offset, DMAE_LEN32_WR_MAX); - offset += DMAE_LEN32_WR_MAX * 4; - len -= DMAE_LEN32_WR_MAX; - } - bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, - addr + offset, len); - } else - bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len); -} - -static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len) -{ - u32 buf_len = (((len * 4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len * 4)); - u32 buf_len32 = buf_len / 4; - int i; - - memset(bp->gunzip_buf, fill, buf_len); - - for (i = 0; i < len; i += buf_len32) { - u32 cur_len = min(buf_len32, len - i); - - bnx2x_write_big_buf(bp, addr + i * 4, cur_len); - } -} - -static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data, - u32 len64) -{ - u32 buf_len32 = FW_BUF_SIZE / 4; - u32 len = len64 * 2; - u64 data64 = 0; - int i; - - /* 64 bit value is in a blob: first low DWORD, then high DWORD */ - data64 = HILO_U64((*(data + 1)), (*data)); - len64 = min((u32)(FW_BUF_SIZE/8), len64); - for (i = 0; i < len64; i++) { - u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i; - - *pdata = data64; - } - - for (i = 0; i < len; i += buf_len32) { - u32 cur_len = min(buf_len32, len - i); - - bnx2x_write_big_buf(bp, addr + i * 4, cur_len); - } -} - -/********************************************************* - There are different blobs for each PRAM section. - In addition, each blob write operation is divided into a few operations - in order to decrease the amount of phys. contiguous buffer needed. - Thus, when we select a blob the address may be with some offset - from the beginning of PRAM section. - The same holds for the INT_TABLE sections. -**********************************************************/ -#define IF_IS_INT_TABLE_ADDR(base, addr) \ - if (((base) <= (addr)) && ((base) + 0x400 >= (addr))) - -#define IF_IS_PRAM_ADDR(base, addr) \ - if (((base) <= (addr)) && ((base) + 0x40000 >= (addr))) - -static const u32 *bnx2x_sel_blob(u32 addr, const u32 *data, int is_e1) -{ - IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr) - data = is_e1 ? tsem_int_table_data_e1 : - tsem_int_table_data_e1h; - else - IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr) - data = is_e1 ? csem_int_table_data_e1 : - csem_int_table_data_e1h; - else - IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr) - data = is_e1 ? usem_int_table_data_e1 : - usem_int_table_data_e1h; - else - IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr) - data = is_e1 ? xsem_int_table_data_e1 : - xsem_int_table_data_e1h; - else - IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr) - data = is_e1 ? tsem_pram_data_e1 : tsem_pram_data_e1h; - else - IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr) - data = is_e1 ? csem_pram_data_e1 : csem_pram_data_e1h; - else - IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr) - data = is_e1 ? usem_pram_data_e1 : usem_pram_data_e1h; - else - IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr) - data = is_e1 ? xsem_pram_data_e1 : xsem_pram_data_e1h; - - return data; -} - -static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data, - u32 len, int gunzip, int is_e1, u32 blob_off) -{ - int offset = 0; - - data = bnx2x_sel_blob(addr, data, is_e1) + blob_off; - - if (gunzip) { - int rc; -#ifdef __BIG_ENDIAN - int i, size; - u32 *temp; - - temp = kmalloc(len, GFP_KERNEL); - size = (len / 4) + ((len % 4) ? 1 : 0); - for (i = 0; i < size; i++) - temp[i] = swab32(data[i]); - data = temp; -#endif - rc = bnx2x_gunzip(bp, (u8 *)data, len); - if (rc) { - BNX2X_ERR("gunzip failed ! rc %d\n", rc); -#ifdef __BIG_ENDIAN - kfree(temp); -#endif - return; - } - len = bp->gunzip_outlen; -#ifdef __BIG_ENDIAN - kfree(temp); - for (i = 0; i < len; i++) - ((u32 *)bp->gunzip_buf)[i] = - swab32(((u32 *)bp->gunzip_buf)[i]); -#endif - } else { - if ((len * 4) > FW_BUF_SIZE) { - BNX2X_ERR("LARGE DMAE OPERATION ! " - "addr 0x%x len 0x%x\n", addr, len*4); - return; - } - memcpy(bp->gunzip_buf, data, len * 4); - } - - if (bp->dmae_ready) { - while (len > DMAE_LEN32_WR_MAX) { - bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, - addr + offset, DMAE_LEN32_WR_MAX); - offset += DMAE_LEN32_WR_MAX * 4; - len -= DMAE_LEN32_WR_MAX; - } - bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, - addr + offset, len); - } else - bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len); -} - -static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end) -{ - int is_e1 = CHIP_IS_E1(bp); - int is_e1h = CHIP_IS_E1H(bp); - int is_emul_e1h = (CHIP_REV_IS_EMUL(bp) && is_e1h); - int hw_wr, i; - union init_op *op; - u32 op_type, addr, len; - const u32 *data, *data_base; - - if (CHIP_REV_IS_FPGA(bp)) - hw_wr = OP_WR_FPGA; - else if (CHIP_REV_IS_EMUL(bp)) - hw_wr = OP_WR_EMUL; - else - hw_wr = OP_WR_ASIC; - - if (is_e1) - data_base = init_data_e1; - else /* CHIP_IS_E1H(bp) */ - data_base = init_data_e1h; - - for (i = op_start; i < op_end; i++) { - - op = (union init_op *)&(init_ops[i]); - - op_type = op->str_wr.op; - addr = op->str_wr.offset; - len = op->str_wr.data_len; - data = data_base + op->str_wr.data_off; - - /* careful! it must be in order */ - if (unlikely(op_type > OP_WB)) { - - /* If E1 only */ - if (op_type <= OP_WB_E1) { - if (is_e1) - op_type -= (OP_RD_E1 - OP_RD); - - /* If E1H only */ - } else if (op_type <= OP_WB_E1H) { - if (is_e1h) - op_type -= (OP_RD_E1H - OP_RD); - } - - /* HW/EMUL specific */ - if (op_type == hw_wr) - op_type = OP_WR; - - /* EMUL on E1H is special */ - if ((op_type == OP_WR_EMUL_E1H) && is_emul_e1h) - op_type = OP_WR; - } - - switch (op_type) { - case OP_RD: - REG_RD(bp, addr); - break; - case OP_WR: - REG_WR(bp, addr, op->write.val); - break; - case OP_SW: - bnx2x_init_str_wr(bp, addr, data, len); - break; - case OP_WB: - bnx2x_init_wr_wb(bp, addr, data, len, 0, is_e1, 0); - break; - case OP_SI: - bnx2x_init_ind_wr(bp, addr, data, len); - break; - case OP_ZR: - bnx2x_init_fill(bp, addr, 0, op->zero.len); - break; - case OP_ZP: - bnx2x_init_wr_wb(bp, addr, data, len, 1, is_e1, - op->str_wr.data_off); - break; - case OP_WR_64: - bnx2x_init_wr_64(bp, addr, data, len); - break; - default: - /* happens whenever an op is of a diff HW */ -#if 0 - DP(NETIF_MSG_HW, "skipping init operation " - "index %d[%d:%d]: type %d addr 0x%x " - "len %d(0x%x)\n", - i, op_start, op_end, op_type, addr, len, len); -#endif - break; - } - } -} - - /**************************************************************************** * PXP ****************************************************************************/ @@ -567,111 +321,6 @@ static const struct arb_line write_arb_addr[NUM_WR_Q-1] = { PXP2_REG_RQ_BW_WR_UBOUND30} }; -static void bnx2x_init_pxp(struct bnx2x *bp) -{ - u16 devctl; - int r_order, w_order; - u32 val, i; - - pci_read_config_word(bp->pdev, - bp->pcie_cap + PCI_EXP_DEVCTL, &devctl); - DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl); - w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5); - if (bp->mrrs == -1) - r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12); - else { - DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs); - r_order = bp->mrrs; - } - - if (r_order > MAX_RD_ORD) { - DP(NETIF_MSG_HW, "read order of %d order adjusted to %d\n", - r_order, MAX_RD_ORD); - r_order = MAX_RD_ORD; - } - if (w_order > MAX_WR_ORD) { - DP(NETIF_MSG_HW, "write order of %d order adjusted to %d\n", - w_order, MAX_WR_ORD); - w_order = MAX_WR_ORD; - } - if (CHIP_REV_IS_FPGA(bp)) { - DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n"); - w_order = 0; - } - DP(NETIF_MSG_HW, "read order %d write order %d\n", r_order, w_order); - - for (i = 0; i < NUM_RD_Q-1; i++) { - REG_WR(bp, read_arb_addr[i].l, read_arb_data[i][r_order].l); - REG_WR(bp, read_arb_addr[i].add, - read_arb_data[i][r_order].add); - REG_WR(bp, read_arb_addr[i].ubound, - read_arb_data[i][r_order].ubound); - } - - for (i = 0; i < NUM_WR_Q-1; i++) { - if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) || - (write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) { - - REG_WR(bp, write_arb_addr[i].l, - write_arb_data[i][w_order].l); - - REG_WR(bp, write_arb_addr[i].add, - write_arb_data[i][w_order].add); - - REG_WR(bp, write_arb_addr[i].ubound, - write_arb_data[i][w_order].ubound); - } else { - - val = REG_RD(bp, write_arb_addr[i].l); - REG_WR(bp, write_arb_addr[i].l, - val | (write_arb_data[i][w_order].l << 10)); - - val = REG_RD(bp, write_arb_addr[i].add); - REG_WR(bp, write_arb_addr[i].add, - val | (write_arb_data[i][w_order].add << 10)); - - val = REG_RD(bp, write_arb_addr[i].ubound); - REG_WR(bp, write_arb_addr[i].ubound, - val | (write_arb_data[i][w_order].ubound << 7)); - } - } - - val = write_arb_data[NUM_WR_Q-1][w_order].add; - val += write_arb_data[NUM_WR_Q-1][w_order].ubound << 10; - val += write_arb_data[NUM_WR_Q-1][w_order].l << 17; - REG_WR(bp, PXP2_REG_PSWRQ_BW_RD, val); - - val = read_arb_data[NUM_RD_Q-1][r_order].add; - val += read_arb_data[NUM_RD_Q-1][r_order].ubound << 10; - val += read_arb_data[NUM_RD_Q-1][r_order].l << 17; - REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val); - - REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order); - REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order); - REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order); - REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order); - - if (r_order == MAX_RD_ORD) - REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00); - - REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order)); - - if (CHIP_IS_E1H(bp)) { - val = ((w_order == 0) ? 2 : 3); - REG_WR(bp, PXP2_REG_WR_HC_MPS, val); - REG_WR(bp, PXP2_REG_WR_USDM_MPS, val); - REG_WR(bp, PXP2_REG_WR_CSDM_MPS, val); - REG_WR(bp, PXP2_REG_WR_TSDM_MPS, val); - REG_WR(bp, PXP2_REG_WR_XSDM_MPS, val); - REG_WR(bp, PXP2_REG_WR_QM_MPS, val); - REG_WR(bp, PXP2_REG_WR_TM_MPS, val); - REG_WR(bp, PXP2_REG_WR_SRC_MPS, val); - REG_WR(bp, PXP2_REG_WR_DBG_MPS, val); - REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */ - REG_WR(bp, PXP2_REG_WR_CDU_MPS, val); - } -} - /**************************************************************************** * CDU @@ -695,128 +344,12 @@ static void bnx2x_init_pxp(struct bnx2x *bp) (0x80 | ((_type) & 0xf << 3) | (CDU_CRC8(_cid, _region, _type) & 0x7)) #define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val) ((_val) & ~0x80) -/***************************************************************************** - * Description: - * Calculates crc 8 on a word value: polynomial 0-1-2-8 - * Code was translated from Verilog. - ****************************************************************************/ -static u8 calc_crc8(u32 data, u8 crc) -{ - u8 D[32]; - u8 NewCRC[8]; - u8 C[8]; - u8 crc_res; - u8 i; - - /* split the data into 31 bits */ - for (i = 0; i < 32; i++) { - D[i] = data & 1; - data = data >> 1; - } - - /* split the crc into 8 bits */ - for (i = 0; i < 8; i++) { - C[i] = crc & 1; - crc = crc >> 1; - } - - NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^ - D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^ - C[6] ^ C[7]; - NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^ - D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^ - D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ C[6]; - NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^ - D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^ - C[0] ^ C[1] ^ C[4] ^ C[5]; - NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^ - D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^ - C[1] ^ C[2] ^ C[5] ^ C[6]; - NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^ - D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^ - C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7]; - NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^ - D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^ - C[3] ^ C[4] ^ C[7]; - NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^ - D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^ - C[5]; - NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^ - D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^ - C[6]; - - crc_res = 0; - for (i = 0; i < 8; i++) - crc_res |= (NewCRC[i] << i); - - return crc_res; -} /* registers addresses are not in order so these arrays help simplify the code */ -static const int cm_start[E1H_FUNC_MAX][9] = { - {MISC_FUNC0_START, TCM_FUNC0_START, UCM_FUNC0_START, CCM_FUNC0_START, - XCM_FUNC0_START, TSEM_FUNC0_START, USEM_FUNC0_START, CSEM_FUNC0_START, - XSEM_FUNC0_START}, - {MISC_FUNC1_START, TCM_FUNC1_START, UCM_FUNC1_START, CCM_FUNC1_START, - XCM_FUNC1_START, TSEM_FUNC1_START, USEM_FUNC1_START, CSEM_FUNC1_START, - XSEM_FUNC1_START}, - {MISC_FUNC2_START, TCM_FUNC2_START, UCM_FUNC2_START, CCM_FUNC2_START, - XCM_FUNC2_START, TSEM_FUNC2_START, USEM_FUNC2_START, CSEM_FUNC2_START, - XSEM_FUNC2_START}, - {MISC_FUNC3_START, TCM_FUNC3_START, UCM_FUNC3_START, CCM_FUNC3_START, - XCM_FUNC3_START, TSEM_FUNC3_START, USEM_FUNC3_START, CSEM_FUNC3_START, - XSEM_FUNC3_START}, - {MISC_FUNC4_START, TCM_FUNC4_START, UCM_FUNC4_START, CCM_FUNC4_START, - XCM_FUNC4_START, TSEM_FUNC4_START, USEM_FUNC4_START, CSEM_FUNC4_START, - XSEM_FUNC4_START}, - {MISC_FUNC5_START, TCM_FUNC5_START, UCM_FUNC5_START, CCM_FUNC5_START, - XCM_FUNC5_START, TSEM_FUNC5_START, USEM_FUNC5_START, CSEM_FUNC5_START, - XSEM_FUNC5_START}, - {MISC_FUNC6_START, TCM_FUNC6_START, UCM_FUNC6_START, CCM_FUNC6_START, - XCM_FUNC6_START, TSEM_FUNC6_START, USEM_FUNC6_START, CSEM_FUNC6_START, - XSEM_FUNC6_START}, - {MISC_FUNC7_START, TCM_FUNC7_START, UCM_FUNC7_START, CCM_FUNC7_START, - XCM_FUNC7_START, TSEM_FUNC7_START, USEM_FUNC7_START, CSEM_FUNC7_START, - XSEM_FUNC7_START} -}; - -static const int cm_end[E1H_FUNC_MAX][9] = { - {MISC_FUNC0_END, TCM_FUNC0_END, UCM_FUNC0_END, CCM_FUNC0_END, - XCM_FUNC0_END, TSEM_FUNC0_END, USEM_FUNC0_END, CSEM_FUNC0_END, - XSEM_FUNC0_END}, - {MISC_FUNC1_END, TCM_FUNC1_END, UCM_FUNC1_END, CCM_FUNC1_END, - XCM_FUNC1_END, TSEM_FUNC1_END, USEM_FUNC1_END, CSEM_FUNC1_END, - XSEM_FUNC1_END}, - {MISC_FUNC2_END, TCM_FUNC2_END, UCM_FUNC2_END, CCM_FUNC2_END, - XCM_FUNC2_END, TSEM_FUNC2_END, USEM_FUNC2_END, CSEM_FUNC2_END, - XSEM_FUNC2_END}, - {MISC_FUNC3_END, TCM_FUNC3_END, UCM_FUNC3_END, CCM_FUNC3_END, - XCM_FUNC3_END, TSEM_FUNC3_END, USEM_FUNC3_END, CSEM_FUNC3_END, - XSEM_FUNC3_END}, - {MISC_FUNC4_END, TCM_FUNC4_END, UCM_FUNC4_END, CCM_FUNC4_END, - XCM_FUNC4_END, TSEM_FUNC4_END, USEM_FUNC4_END, CSEM_FUNC4_END, - XSEM_FUNC4_END}, - {MISC_FUNC5_END, TCM_FUNC5_END, UCM_FUNC5_END, CCM_FUNC5_END, - XCM_FUNC5_END, TSEM_FUNC5_END, USEM_FUNC5_END, CSEM_FUNC5_END, - XSEM_FUNC5_END}, - {MISC_FUNC6_END, TCM_FUNC6_END, UCM_FUNC6_END, CCM_FUNC6_END, - XCM_FUNC6_END, TSEM_FUNC6_END, USEM_FUNC6_END, CSEM_FUNC6_END, - XSEM_FUNC6_END}, - {MISC_FUNC7_END, TCM_FUNC7_END, UCM_FUNC7_END, CCM_FUNC7_END, - XCM_FUNC7_END, TSEM_FUNC7_END, USEM_FUNC7_END, CSEM_FUNC7_END, - XSEM_FUNC7_END}, -}; - -static const int hc_limits[E1H_FUNC_MAX][2] = { - {HC_FUNC0_START, HC_FUNC0_END}, - {HC_FUNC1_START, HC_FUNC1_END}, - {HC_FUNC2_START, HC_FUNC2_END}, - {HC_FUNC3_START, HC_FUNC3_END}, - {HC_FUNC4_START, HC_FUNC4_END}, - {HC_FUNC5_START, HC_FUNC5_END}, - {HC_FUNC6_START, HC_FUNC6_END}, - {HC_FUNC7_START, HC_FUNC7_END} +static const int cm_blocks[9] = { + MISC_BLOCK, TCM_BLOCK, UCM_BLOCK, CCM_BLOCK, XCM_BLOCK, + TSEM_BLOCK, USEM_BLOCK, CSEM_BLOCK, XSEM_BLOCK }; #endif /* BNX2X_INIT_H */ diff --git a/drivers/net/bnx2x_init_ops.h b/drivers/net/bnx2x_init_ops.h new file mode 100644 index 0000000..32552b9 --- /dev/null +++ b/drivers/net/bnx2x_init_ops.h @@ -0,0 +1,442 @@ +/* bnx2x_init_ops.h: Broadcom Everest network driver. + * Static functions needed during the initialization. + * This file is "included" in bnx2x_main.c. + * + * Copyright (c) 2007-2009 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Eilon Greenstein <eilong@broadcom.com> + * Written by: Vladislav Zolotarov <vladz@broadcom.com> + */ +#ifndef BNX2X_INIT_OPS_H +#define BNX2X_INIT_OPS_H + +static void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val); +static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len); + +static void bnx2x_init_str_wr(struct bnx2x *bp, u32 addr, const u32 *data, + u32 len) +{ + int i; + + for (i = 0; i < len; i++) { + REG_WR(bp, addr + i*4, data[i]); + if (!(i % 10000)) { + touch_softlockup_watchdog(); + cpu_relax(); + } + } +} + +static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data, + u16 len) +{ + int i; + + for (i = 0; i < len; i++) { + REG_WR_IND(bp, addr + i*4, data[i]); + if (!(i % 10000)) { + touch_softlockup_watchdog(); + cpu_relax(); + } + } +} + +static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len) +{ + int offset = 0; + + if (bp->dmae_ready) { + while (len > DMAE_LEN32_WR_MAX) { + bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, + addr + offset, DMAE_LEN32_WR_MAX); + offset += DMAE_LEN32_WR_MAX * 4; + len -= DMAE_LEN32_WR_MAX; + } + bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, + addr + offset, len); + } else + bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len); +} + +static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len) +{ + u32 buf_len = (((len * 4) > FW_BUF_SIZE) ? FW_BUF_SIZE : (len * 4)); + u32 buf_len32 = buf_len / 4; + int i; + + memset(bp->gunzip_buf, fill, buf_len); + + for (i = 0; i < len; i += buf_len32) { + u32 cur_len = min(buf_len32, len - i); + + bnx2x_write_big_buf(bp, addr + i * 4, cur_len); + } +} + +static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data, + u32 len64) +{ + u32 buf_len32 = FW_BUF_SIZE / 4; + u32 len = len64 * 2; + u64 data64 = 0; + int i; + + /* 64 bit value is in a blob: first low DWORD, then high DWORD */ + data64 = HILO_U64((*(data + 1)), (*data)); + len64 = min((u32)(FW_BUF_SIZE/8), len64); + for (i = 0; i < len64; i++) { + u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i; + + *pdata = data64; + } + + for (i = 0; i < len; i += buf_len32) { + u32 cur_len = min(buf_len32, len - i); + + bnx2x_write_big_buf(bp, addr + i * 4, cur_len); + } +} + +/********************************************************* + There are different blobs for each PRAM section. + In addition, each blob write operation is divided into a few operations + in order to decrease the amount of phys. contiguous buffer needed. + Thus, when we select a blob the address may be with some offset + from the beginning of PRAM section. + The same holds for the INT_TABLE sections. +**********************************************************/ +#define IF_IS_INT_TABLE_ADDR(base, addr) \ + if (((base) <= (addr)) && ((base) + 0x400 >= (addr))) + +#define IF_IS_PRAM_ADDR(base, addr) \ + if (((base) <= (addr)) && ((base) + 0x40000 >= (addr))) + +static const u8 *bnx2x_sel_blob(struct bnx2x *bp, u32 addr, const u8 *data) +{ + IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr) + data = bp->tsem_int_table_data; + else IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr) + data = bp->csem_int_table_data; + else IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr) + data = bp->usem_int_table_data; + else IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr) + data = bp->xsem_int_table_data; + else IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr) + data = bp->tsem_pram_data; + else IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr) + data = bp->csem_pram_data; + else IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr) + data = bp->usem_pram_data; + else IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr) + data = bp->xsem_pram_data; + + return data; +} + +static void bnx2x_write_big_buf_wb(struct bnx2x *bp, u32 addr, u32 len) +{ + int offset = 0; + + if (bp->dmae_ready) { + while (len > DMAE_LEN32_WR_MAX) { + bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, + addr + offset, DMAE_LEN32_WR_MAX); + offset += DMAE_LEN32_WR_MAX * 4; + len -= DMAE_LEN32_WR_MAX; + } + bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, + addr + offset, len); + } else + bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len); +} + +static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data, + u32 len) +{ + /* This is needed for NO_ZIP mode, currently supported + in little endian mode only */ + data = (const u32*)bnx2x_sel_blob(bp, addr, (const u8*)data); + + if ((len * 4) > FW_BUF_SIZE) { + BNX2X_ERR("LARGE DMAE OPERATION ! " + "addr 0x%x len 0x%x\n", addr, len*4); + return; + } + memcpy(bp->gunzip_buf, data, len * 4); + + bnx2x_write_big_buf_wb(bp, addr, len); +} + +static void bnx2x_init_wr_zp(struct bnx2x *bp, u32 addr, + u32 len, u32 blob_off) +{ + int rc, i; + const u8 *data = NULL; + + data = bnx2x_sel_blob(bp, addr, data) + 4*blob_off; + + if (data == NULL) { + panic("Blob not found for addr 0x%x\n", addr); + return; + } + + rc = bnx2x_gunzip(bp, data, len); + if (rc) { + BNX2X_ERR("gunzip failed ! addr 0x%x rc %d\n", addr, rc); + BNX2X_ERR("blob_offset=0x%x\n", blob_off); + return; + } + + /* gunzip_outlen is in dwords */ + len = bp->gunzip_outlen; + for (i = 0; i < len; i++) + ((u32 *)bp->gunzip_buf)[i] = + cpu_to_le32(((u32 *)bp->gunzip_buf)[i]); + + bnx2x_write_big_buf_wb(bp, addr, len); +} + +static void bnx2x_init_block(struct bnx2x *bp, u32 block, u32 stage) +{ + int hw_wr, i; + u16 op_start = + bp->init_ops_offsets[BLOCK_OPS_IDX(block,stage,STAGE_START)]; + u16 op_end = + bp->init_ops_offsets[BLOCK_OPS_IDX(block,stage,STAGE_END)]; + union init_op *op; + u32 op_type, addr, len; + const u32 *data, *data_base; + + /* If empty block */ + if (op_start == op_end) + return; + + if (CHIP_REV_IS_FPGA(bp)) + hw_wr = OP_WR_FPGA; + else if (CHIP_REV_IS_EMUL(bp)) + hw_wr = OP_WR_EMUL; + else + hw_wr = OP_WR_ASIC; + + data_base = bp->init_data; + + for (i = op_start; i < op_end; i++) { + + op = (union init_op *)&(bp->init_ops[i]); + + op_type = op->str_wr.op; + addr = op->str_wr.offset; + len = op->str_wr.data_len; + data = data_base + op->str_wr.data_off; + + /* HW/EMUL specific */ + if (unlikely((op_type > OP_WB) && (op_type == hw_wr))) + op_type = OP_WR; + + switch (op_type) { + case OP_RD: + REG_RD(bp, addr); + break; + case OP_WR: + REG_WR(bp, addr, op->write.val); + break; + case OP_SW: + bnx2x_init_str_wr(bp, addr, data, len); + break; + case OP_WB: + bnx2x_init_wr_wb(bp, addr, data, len); + break; + case OP_SI: + bnx2x_init_ind_wr(bp, addr, data, len); + break; + case OP_ZR: + bnx2x_init_fill(bp, addr, 0, op->zero.len); + break; + case OP_ZP: + bnx2x_init_wr_zp(bp, addr, len, + op->str_wr.data_off); + break; + case OP_WR_64: + bnx2x_init_wr_64(bp, addr, data, len); + break; + default: + /* happens whenever an op is of a diff HW */ +#if 0 + DP(NETIF_MSG_HW, "skipping init operation " + "index %d[%d:%d]: type %d addr 0x%x " + "len %d(0x%x)\n", + i, op_start, op_end, op_type, addr, len, len); +#endif + break; + } + } +} + +/* PXP */ +static void bnx2x_init_pxp(struct bnx2x *bp) +{ + u16 devctl; + int r_order, w_order; + u32 val, i; + + pci_read_config_word(bp->pdev, + bp->pcie_cap + PCI_EXP_DEVCTL, &devctl); + DP(NETIF_MSG_HW, "read 0x%x from devctl\n", devctl); + w_order = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5); + if (bp->mrrs == -1) + r_order = ((devctl & PCI_EXP_DEVCTL_READRQ) >> 12); + else { + DP(NETIF_MSG_HW, "force read order to %d\n", bp->mrrs); + r_order = bp->mrrs; + } + + if (r_order > MAX_RD_ORD) { + DP(NETIF_MSG_HW, "read order of %d order adjusted to %d\n", + r_order, MAX_RD_ORD); + r_order = MAX_RD_ORD; + } + if (w_order > MAX_WR_ORD) { + DP(NETIF_MSG_HW, "write order of %d order adjusted to %d\n", + w_order, MAX_WR_ORD); + w_order = MAX_WR_ORD; + } + if (CHIP_REV_IS_FPGA(bp)) { + DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n"); + w_order = 0; + } + DP(NETIF_MSG_HW, "read order %d write order %d\n", r_order, w_order); + + for (i = 0; i < NUM_RD_Q-1; i++) { + REG_WR(bp, read_arb_addr[i].l, read_arb_data[i][r_order].l); + REG_WR(bp, read_arb_addr[i].add, + read_arb_data[i][r_order].add); + REG_WR(bp, read_arb_addr[i].ubound, + read_arb_data[i][r_order].ubound); + } + + for (i = 0; i < NUM_WR_Q-1; i++) { + if ((write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L29) || + (write_arb_addr[i].l == PXP2_REG_RQ_BW_WR_L30)) { + + REG_WR(bp, write_arb_addr[i].l, + write_arb_data[i][w_order].l); + + REG_WR(bp, write_arb_addr[i].add, + write_arb_data[i][w_order].add); + + REG_WR(bp, write_arb_addr[i].ubound, + write_arb_data[i][w_order].ubound); + } else { + + val = REG_RD(bp, write_arb_addr[i].l); + REG_WR(bp, write_arb_addr[i].l, + val | (write_arb_data[i][w_order].l << 10)); + + val = REG_RD(bp, write_arb_addr[i].add); + REG_WR(bp, write_arb_addr[i].add, + val | (write_arb_data[i][w_order].add << 10)); + + val = REG_RD(bp, write_arb_addr[i].ubound); + REG_WR(bp, write_arb_addr[i].ubound, + val | (write_arb_data[i][w_order].ubound << 7)); + } + } + + val = write_arb_data[NUM_WR_Q-1][w_order].add; + val += write_arb_data[NUM_WR_Q-1][w_order].ubound << 10; + val += write_arb_data[NUM_WR_Q-1][w_order].l << 17; + REG_WR(bp, PXP2_REG_PSWRQ_BW_RD, val); + + val = read_arb_data[NUM_RD_Q-1][r_order].add; + val += read_arb_data[NUM_RD_Q-1][r_order].ubound << 10; + val += read_arb_data[NUM_RD_Q-1][r_order].l << 17; + REG_WR(bp, PXP2_REG_PSWRQ_BW_WR, val); + + REG_WR(bp, PXP2_REG_RQ_WR_MBS0, w_order); + REG_WR(bp, PXP2_REG_RQ_WR_MBS1, w_order); + REG_WR(bp, PXP2_REG_RQ_RD_MBS0, r_order); + REG_WR(bp, PXP2_REG_RQ_RD_MBS1, r_order); + + if (r_order == MAX_RD_ORD) + REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00); + + REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order)); + + if (CHIP_IS_E1H(bp)) { + val = ((w_order == 0) ? 2 : 3); + REG_WR(bp, PXP2_REG_WR_HC_MPS, val); + REG_WR(bp, PXP2_REG_WR_USDM_MPS, val); + REG_WR(bp, PXP2_REG_WR_CSDM_MPS, val); + REG_WR(bp, PXP2_REG_WR_TSDM_MPS, val); + REG_WR(bp, PXP2_REG_WR_XSDM_MPS, val); + REG_WR(bp, PXP2_REG_WR_QM_MPS, val); + REG_WR(bp, PXP2_REG_WR_TM_MPS, val); + REG_WR(bp, PXP2_REG_WR_SRC_MPS, val); + REG_WR(bp, PXP2_REG_WR_DBG_MPS, val); + REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */ + REG_WR(bp, PXP2_REG_WR_CDU_MPS, val); + } +} + +/***************************************************************************** + * Description: + * Calculates crc 8 on a word value: polynomial 0-1-2-8 + * Code was translated from Verilog. + ****************************************************************************/ +static u8 calc_crc8(u32 data, u8 crc) +{ + u8 D[32]; + u8 NewCRC[8]; + u8 C[8]; + u8 crc_res; + u8 i; + + /* split the data into 31 bits */ + for (i = 0; i < 32; i++) { + D[i] = data & 1; + data = data >> 1; + } + + /* split the crc into 8 bits */ + for (i = 0; i < 8; i++) { + C[i] = crc & 1; + crc = crc >> 1; + } + + NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^ + D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^ + C[6] ^ C[7]; + NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^ + D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^ + D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^ C[6]; + NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^ + D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^ + C[0] ^ C[1] ^ C[4] ^ C[5]; + NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^ + D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^ + C[1] ^ C[2] ^ C[5] ^ C[6]; + NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^ + D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^ + C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7]; + NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^ + D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^ + C[3] ^ C[4] ^ C[7]; + NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^ + D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^ + C[5]; + NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^ + D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^ + C[6]; + + crc_res = 0; + for (i = 0; i < 8; i++) + crc_res |= (NewCRC[i] << i); + + return crc_res; +} + +#endif /* BNX2X_INIT_OPS_H */ diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index ad5ef25..cdc80e0 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -53,12 +53,19 @@ #include "bnx2x.h" #include "bnx2x_init.h" +#include "bnx2x_init_ops.h" #include "bnx2x_dump.h" #define DRV_MODULE_VERSION "1.48.105" #define DRV_MODULE_RELDATE "2009/03/02" #define BNX2X_BC_VER 0x040200 +#include <linux/firmware.h> +#include "bnx2x_fw_file_hdr.h" +/* FW files */ +#define FW_FILE_PREFIX_E1 "bnx2x-e1-" +#define FW_FILE_PREFIX_E1H "bnx2x-e1h-" + /* Time in jiffies before concluding the transmitter is hung */ #define TX_TIMEOUT (5*HZ) @@ -5232,13 +5239,15 @@ static void bnx2x_gunzip_end(struct bnx2x *bp) } } -static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len) +static int bnx2x_gunzip(struct bnx2x *bp, const u8 *zbuf, int len) { int n, rc; /* check gzip header */ - if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) + if ((zbuf[0] != 0x1f) || (zbuf[1] != 0x8b) || (zbuf[2] != Z_DEFLATED)) { + BNX2X_ERR("Bad gzip header\n"); return -EINVAL; + } n = 10; @@ -5247,7 +5256,7 @@ static int bnx2x_gunzip(struct bnx2x *bp, u8 *zbuf, int len) if (zbuf[3] & FNAME) while ((zbuf[n++] != 0) && (n < len)); - bp->strm->next_in = zbuf + n; + bp->strm->next_in = (typeof(bp->strm->next_in))zbuf + n; bp->strm->avail_in = len - n; bp->strm->next_out = bp->gunzip_buf; bp->strm->avail_out = FW_BUF_SIZE; @@ -5369,8 +5378,8 @@ static int bnx2x_int_mem_test(struct bnx2x *bp) msleep(50); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03); msleep(50); - bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END); - bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END); + bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE); + bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE); DP(NETIF_MSG_HW, "part2\n"); @@ -5434,8 +5443,8 @@ static int bnx2x_int_mem_test(struct bnx2x *bp) msleep(50); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x03); msleep(50); - bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END); - bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END); + bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE); + bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE); #ifndef BCM_ISCSI /* set NIC mode */ REG_WR(bp, PRS_REG_NIC_MODE, 1); @@ -5510,7 +5519,7 @@ static int bnx2x_init_common(struct bnx2x *bp) REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc); - bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END); + bnx2x_init_block(bp, MISC_BLOCK, COMMON_STAGE); if (CHIP_IS_E1H(bp)) REG_WR(bp, MISC_REG_E1HMF_MODE, IS_E1HMF(bp)); @@ -5518,14 +5527,14 @@ static int bnx2x_init_common(struct bnx2x *bp) msleep(30); REG_WR(bp, MISC_REG_LCPLL_CTRL_REG_2, 0x0); - bnx2x_init_block(bp, PXP_COMMON_START, PXP_COMMON_END); + bnx2x_init_block(bp, PXP_BLOCK, COMMON_STAGE); if (CHIP_IS_E1(bp)) { /* enable HW interrupt from PXP on USDM overflow bit 16 on INT_MASK_0 */ REG_WR(bp, PXP_REG_PXP_INT_MASK_0, 0); } - bnx2x_init_block(bp, PXP2_COMMON_START, PXP2_COMMON_END); + bnx2x_init_block(bp, PXP2_BLOCK, COMMON_STAGE); bnx2x_init_pxp(bp); #ifdef __BIG_ENDIAN @@ -5571,60 +5580,60 @@ static int bnx2x_init_common(struct bnx2x *bp) REG_WR(bp, PXP2_REG_RQ_DISABLE_INPUTS, 0); REG_WR(bp, PXP2_REG_RD_DISABLE_INPUTS, 0); - bnx2x_init_block(bp, DMAE_COMMON_START, DMAE_COMMON_END); + bnx2x_init_block(bp, DMAE_BLOCK, COMMON_STAGE); /* clean the DMAE memory */ bp->dmae_ready = 1; bnx2x_init_fill(bp, TSEM_REG_PRAM, 0, 8); - bnx2x_init_block(bp, TCM_COMMON_START, TCM_COMMON_END); - bnx2x_init_block(bp, UCM_COMMON_START, UCM_COMMON_END); - bnx2x_init_block(bp, CCM_COMMON_START, CCM_COMMON_END); - bnx2x_init_block(bp, XCM_COMMON_START, XCM_COMMON_END); + bnx2x_init_block(bp, TCM_BLOCK, COMMON_STAGE); + bnx2x_init_block(bp, UCM_BLOCK, COMMON_STAGE); + bnx2x_init_block(bp, CCM_BLOCK, COMMON_STAGE); + bnx2x_init_block(bp, XCM_BLOCK, COMMON_STAGE); bnx2x_read_dmae(bp, XSEM_REG_PASSIVE_BUFFER, 3); bnx2x_read_dmae(bp, CSEM_REG_PASSIVE_BUFFER, 3); bnx2x_read_dmae(bp, TSEM_REG_PASSIVE_BUFFER, 3); bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3); - bnx2x_init_block(bp, QM_COMMON_START, QM_COMMON_END); + bnx2x_init_block(bp, QM_BLOCK, COMMON_STAGE); /* soft reset pulse */ REG_WR(bp, QM_REG_SOFT_RESET, 1); REG_WR(bp, QM_REG_SOFT_RESET, 0); #ifdef BCM_ISCSI - bnx2x_init_block(bp, TIMERS_COMMON_START, TIMERS_COMMON_END); + bnx2x_init_block(bp, TIMERS_BLOCK, COMMON_STAGE); #endif - bnx2x_init_block(bp, DQ_COMMON_START, DQ_COMMON_END); + bnx2x_init_block(bp, DQ_BLOCK, COMMON_STAGE); REG_WR(bp, DORQ_REG_DPM_CID_OFST, BCM_PAGE_SHIFT); if (!CHIP_REV_IS_SLOW(bp)) { /* enable hw interrupt from doorbell Q */ REG_WR(bp, DORQ_REG_DORQ_INT_MASK, 0); } - bnx2x_init_block(bp, BRB1_COMMON_START, BRB1_COMMON_END); - bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END); + bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE); + bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE); REG_WR(bp, PRS_REG_A_PRSU_20, 0xf); /* set NIC mode */ REG_WR(bp, PRS_REG_NIC_MODE, 1); if (CHIP_IS_E1H(bp)) REG_WR(bp, PRS_REG_E1HOV_MODE, IS_E1HMF(bp)); - bnx2x_init_block(bp, TSDM_COMMON_START, TSDM_COMMON_END); - bnx2x_init_block(bp, CSDM_COMMON_START, CSDM_COMMON_END); - bnx2x_init_block(bp, USDM_COMMON_START, USDM_COMMON_END); - bnx2x_init_block(bp, XSDM_COMMON_START, XSDM_COMMON_END); + bnx2x_init_block(bp, TSDM_BLOCK, COMMON_STAGE); + bnx2x_init_block(bp, CSDM_BLOCK, COMMON_STAGE); + bnx2x_init_block(bp, USDM_BLOCK, COMMON_STAGE); + bnx2x_init_block(bp, XSDM_BLOCK, COMMON_STAGE); bnx2x_init_fill(bp, TSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp)); bnx2x_init_fill(bp, USTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp)); bnx2x_init_fill(bp, CSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp)); bnx2x_init_fill(bp, XSTORM_INTMEM_ADDR, 0, STORM_INTMEM_SIZE(bp)); - bnx2x_init_block(bp, TSEM_COMMON_START, TSEM_COMMON_END); - bnx2x_init_block(bp, USEM_COMMON_START, USEM_COMMON_END); - bnx2x_init_block(bp, CSEM_COMMON_START, CSEM_COMMON_END); - bnx2x_init_block(bp, XSEM_COMMON_START, XSEM_COMMON_END); + bnx2x_init_block(bp, TSEM_BLOCK, COMMON_STAGE); + bnx2x_init_block(bp, USEM_BLOCK, COMMON_STAGE); + bnx2x_init_block(bp, CSEM_BLOCK, COMMON_STAGE); + bnx2x_init_block(bp, XSEM_BLOCK, COMMON_STAGE); /* sync semi rtc */ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, @@ -5632,16 +5641,16 @@ static int bnx2x_init_common(struct bnx2x *bp) REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0x80000000); - bnx2x_init_block(bp, UPB_COMMON_START, UPB_COMMON_END); - bnx2x_init_block(bp, XPB_COMMON_START, XPB_COMMON_END); - bnx2x_init_block(bp, PBF_COMMON_START, PBF_COMMON_END); + bnx2x_init_block(bp, UPB_BLOCK, COMMON_STAGE); + bnx2x_init_block(bp, XPB_BLOCK, COMMON_STAGE); + bnx2x_init_block(bp, PBF_BLOCK, COMMON_STAGE); REG_WR(bp, SRC_REG_SOFT_RST, 1); for (i = SRC_REG_KEYRSS0_0; i <= SRC_REG_KEYRSS1_9; i += 4) { REG_WR(bp, i, 0xc0cac01a); /* TODO: replace with something meaningful */ } - bnx2x_init_block(bp, SRCH_COMMON_START, SRCH_COMMON_END); + bnx2x_init_block(bp, SRCH_BLOCK, COMMON_STAGE); REG_WR(bp, SRC_REG_SOFT_RST, 0); if (sizeof(union cdu_context) != 1024) @@ -5649,7 +5658,7 @@ static int bnx2x_init_common(struct bnx2x *bp) printk(KERN_ALERT PFX "please adjust the size of" " cdu_context(%ld)\n", (long)sizeof(union cdu_context)); - bnx2x_init_block(bp, CDU_COMMON_START, CDU_COMMON_END); + bnx2x_init_block(bp, CDU_BLOCK, COMMON_STAGE); val = (4 << 24) + (0 << 12) + 1024; REG_WR(bp, CDU_REG_CDU_GLOBAL_PARAMS, val); if (CHIP_IS_E1(bp)) { @@ -5658,7 +5667,7 @@ static int bnx2x_init_common(struct bnx2x *bp) REG_WR(bp, CDU_REG_CDU_DEBUG, 0); } - bnx2x_init_block(bp, CFC_COMMON_START, CFC_COMMON_END); + bnx2x_init_block(bp, CFC_BLOCK, COMMON_STAGE); REG_WR(bp, CFC_REG_INIT_REG, 0x7FF); /* enable context validation interrupt from CFC */ REG_WR(bp, CFC_REG_CFC_INT_MASK, 0); @@ -5666,20 +5675,25 @@ static int bnx2x_init_common(struct bnx2x *bp) /* set the thresholds to prevent CFC/CDU race */ REG_WR(bp, CFC_REG_DEBUG0, 0x20020000); - bnx2x_init_block(bp, HC_COMMON_START, HC_COMMON_END); - bnx2x_init_block(bp, MISC_AEU_COMMON_START, MISC_AEU_COMMON_END); + bnx2x_init_block(bp, HC_BLOCK, COMMON_STAGE); + bnx2x_init_block(bp, MISC_AEU_BLOCK, COMMON_STAGE); /* PXPCS COMMON comes here */ + bnx2x_init_block(bp, PXPCS_BLOCK, COMMON_STAGE); /* Reset PCIE errors for debug */ REG_WR(bp, 0x2814, 0xffffffff); REG_WR(bp, 0x3820, 0xffffffff); /* EMAC0 COMMON comes here */ + bnx2x_init_block(bp, EMAC0_BLOCK, COMMON_STAGE); /* EMAC1 COMMON comes here */ + bnx2x_init_block(bp, EMAC1_BLOCK, COMMON_STAGE); /* DBU COMMON comes here */ + bnx2x_init_block(bp, DBU_BLOCK, COMMON_STAGE); /* DBG COMMON comes here */ + bnx2x_init_block(bp, DBG_BLOCK, COMMON_STAGE); - bnx2x_init_block(bp, NIG_COMMON_START, NIG_COMMON_END); + bnx2x_init_block(bp, NIG_BLOCK, COMMON_STAGE); if (CHIP_IS_E1H(bp)) { REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_E1HMF(bp)); REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_E1HMF(bp)); @@ -5763,6 +5777,7 @@ static int bnx2x_init_common(struct bnx2x *bp) static int bnx2x_init_port(struct bnx2x *bp) { int port = BP_PORT(bp); + int init_stage = port ? PORT1_STAGE : PORT0_STAGE; u32 low, high; u32 val; @@ -5771,7 +5786,9 @@ static int bnx2x_init_port(struct bnx2x *bp) REG_WR(bp, NIG_REG_MASK_INTERRUPT_PORT0 + port*4, 0); /* Port PXP comes here */ + bnx2x_init_block(bp, PXP_BLOCK, init_stage); /* Port PXP2 comes here */ + bnx2x_init_block(bp, PXP2_BLOCK, init_stage); #ifdef BCM_ISCSI /* Port0 1 * Port1 385 */ @@ -5798,21 +5815,19 @@ static int bnx2x_init_port(struct bnx2x *bp) REG_WR(bp, PXP2_REG_PSWRQ_SRC0_L2P + func*4, PXP_ONE_ILT(i)); #endif /* Port CMs come here */ - bnx2x_init_block(bp, (port ? XCM_PORT1_START : XCM_PORT0_START), - (port ? XCM_PORT1_END : XCM_PORT0_END)); + bnx2x_init_block(bp, XCM_BLOCK, init_stage); /* Port QM comes here */ #ifdef BCM_ISCSI REG_WR(bp, TM_REG_LIN0_SCAN_TIME + func*4, 1024/64*20); REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + func*4, 31); - bnx2x_init_block(bp, func ? TIMERS_PORT1_START : TIMERS_PORT0_START, - func ? TIMERS_PORT1_END : TIMERS_PORT0_END); + bnx2x_init_block(bp, TIMERS_BLOCK, init_stage); #endif /* Port DQ comes here */ + bnx2x_init_block(bp, DQ_BLOCK, init_stage); - bnx2x_init_block(bp, (port ? BRB1_PORT1_START : BRB1_PORT0_START), - (port ? BRB1_PORT1_END : BRB1_PORT0_END)); + bnx2x_init_block(bp, BRB1_BLOCK, init_stage); if (CHIP_REV_IS_SLOW(bp) && !CHIP_IS_E1H(bp)) { /* no pause for emulation and FPGA */ low = 0; @@ -5837,25 +5852,27 @@ static int bnx2x_init_port(struct bnx2x *bp) /* Port PRS comes here */ + bnx2x_init_block(bp, PRS_BLOCK, init_stage); /* Port TSDM comes here */ + bnx2x_init_block(bp, TSDM_BLOCK, init_stage); /* Port CSDM comes here */ + bnx2x_init_block(bp, CSDM_BLOCK, init_stage); /* Port USDM comes here */ + bnx2x_init_block(bp, USDM_BLOCK, init_stage); /* Port XSDM comes here */ + bnx2x_init_block(bp, XSDM_BLOCK, init_stage); - bnx2x_init_block(bp, port ? TSEM_PORT1_START : TSEM_PORT0_START, - port ? TSEM_PORT1_END : TSEM_PORT0_END); - bnx2x_init_block(bp, port ? USEM_PORT1_START : USEM_PORT0_START, - port ? USEM_PORT1_END : USEM_PORT0_END); - bnx2x_init_block(bp, port ? CSEM_PORT1_START : CSEM_PORT0_START, - port ? CSEM_PORT1_END : CSEM_PORT0_END); - bnx2x_init_block(bp, port ? XSEM_PORT1_START : XSEM_PORT0_START, - port ? XSEM_PORT1_END : XSEM_PORT0_END); + bnx2x_init_block(bp, TSEM_BLOCK, init_stage); + bnx2x_init_block(bp, USEM_BLOCK, init_stage); + bnx2x_init_block(bp, CSEM_BLOCK, init_stage); + bnx2x_init_block(bp, XSEM_BLOCK, init_stage); /* Port UPB comes here */ + bnx2x_init_block(bp, UPB_BLOCK, init_stage); /* Port XPB comes here */ + bnx2x_init_block(bp, XPB_BLOCK, init_stage); - bnx2x_init_block(bp, port ? PBF_PORT1_START : PBF_PORT0_START, - port ? PBF_PORT1_END : PBF_PORT0_END); + bnx2x_init_block(bp, PBF_BLOCK, init_stage); /* configure PBF to work without PAUSE mtu 9000 */ REG_WR(bp, PBF_REG_P0_PAUSE_ENABLE + port*4, 0); @@ -5885,18 +5902,17 @@ static int bnx2x_init_port(struct bnx2x *bp) /* Port SRCH comes here */ #endif /* Port CDU comes here */ + bnx2x_init_block(bp, CDU_BLOCK, init_stage); /* Port CFC comes here */ + bnx2x_init_block(bp, CFC_BLOCK, init_stage); if (CHIP_IS_E1(bp)) { REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); } - bnx2x_init_block(bp, port ? HC_PORT1_START : HC_PORT0_START, - port ? HC_PORT1_END : HC_PORT0_END); + bnx2x_init_block(bp, HC_BLOCK, init_stage); - bnx2x_init_block(bp, port ? MISC_AEU_PORT1_START : - MISC_AEU_PORT0_START, - port ? MISC_AEU_PORT1_END : MISC_AEU_PORT0_END); + bnx2x_init_block(bp, MISC_AEU_BLOCK, init_stage); /* init aeu_mask_attn_func_0/1: * - SF mode: bits 3-7 are masked. only bits 0-2 are in use * - MF mode: bit 3 is masked. bits 0-2 are in use as in SF @@ -5905,13 +5921,17 @@ static int bnx2x_init_port(struct bnx2x *bp) (IS_E1HMF(bp) ? 0xF7 : 0x7)); /* Port PXPCS comes here */ + bnx2x_init_block(bp, PXPCS_BLOCK, init_stage); /* Port EMAC0 comes here */ + bnx2x_init_block(bp, EMAC0_BLOCK, init_stage); /* Port EMAC1 comes here */ + bnx2x_init_block(bp, EMAC1_BLOCK, init_stage); /* Port DBU comes here */ + bnx2x_init_block(bp, DBU_BLOCK, init_stage); /* Port DBG comes here */ + bnx2x_init_block(bp, DBG_BLOCK, init_stage); - bnx2x_init_block(bp, port ? NIG_PORT1_START : NIG_PORT0_START, - port ? NIG_PORT1_END : NIG_PORT0_END); + bnx2x_init_block(bp, NIG_BLOCK, init_stage); REG_WR(bp, NIG_REG_XGXS_SERDES0_MODE_SEL + port*4, 1); @@ -5931,7 +5951,9 @@ static int bnx2x_init_port(struct bnx2x *bp) } /* Port MCP comes here */ + bnx2x_init_block(bp, MCP_BLOCK, init_stage); /* Port DMAE comes here */ + bnx2x_init_block(bp, DMAE_BLOCK, init_stage); switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: @@ -6036,7 +6058,7 @@ static int bnx2x_init_func(struct bnx2x *bp) if (CHIP_IS_E1H(bp)) { for (i = 0; i < 9; i++) bnx2x_init_block(bp, - cm_start[func][i], cm_end[func][i]); + cm_blocks[i], FUNC0_STAGE + func); REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1); REG_WR(bp, NIG_REG_LLH0_FUNC_VLAN_ID + port*8, bp->e1hov); @@ -6049,7 +6071,7 @@ static int bnx2x_init_func(struct bnx2x *bp) REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0); REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0); } - bnx2x_init_block(bp, hc_limits[func][0], hc_limits[func][1]); + bnx2x_init_block(bp, HC_BLOCK, FUNC0_STAGE + func); /* Reset PCIE errors for debug */ REG_WR(bp, 0x2114, 0xffffffff); @@ -11082,6 +11104,190 @@ static int __devinit bnx2x_get_pcie_speed(struct bnx2x *bp) val = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT; return val; } +static int __devinit bnx2x_check_firmware(struct bnx2x *bp) +{ + struct bnx2x_fw_file_hdr *fw_hdr; + struct bnx2x_fw_file_section *sections; + u16 *ops_offsets; + u32 offset, len, num_ops; + int i; + const struct firmware *firmware = bp->firmware; + const u8 * fw_ver; + + if (firmware->size < sizeof(struct bnx2x_fw_file_hdr)) + return -EINVAL; + + fw_hdr = (struct bnx2x_fw_file_hdr *)firmware->data; + sections = (struct bnx2x_fw_file_section *)fw_hdr; + + /* Make sure none of the offsets and sizes make us read beyond + * the end of the firmware data */ + for (i = 0; i < sizeof(*fw_hdr) / sizeof(*sections); i++) { + offset = be32_to_cpu(sections[i].offset); + len = be32_to_cpu(sections[i].len); + if (offset + len > firmware->size) { + printk(KERN_ERR PFX "Section %d length is out of bounds\n", i); + return -EINVAL; + } + } + + /* Likewise for the init_ops offsets */ + offset = be32_to_cpu(fw_hdr->init_ops_offsets.offset); + ops_offsets = (u16 *)(firmware->data + offset); + num_ops = be32_to_cpu(fw_hdr->init_ops.len) / sizeof(struct raw_op); + + for (i = 0; i < be32_to_cpu(fw_hdr->init_ops_offsets.len) / 2; i++) { + if (be16_to_cpu(ops_offsets[i]) > num_ops) { + printk(KERN_ERR PFX "Section offset %d is out of bounds\n", i); + return -EINVAL; + } + } + + /* Check FW version */ + offset = be32_to_cpu(fw_hdr->fw_version.offset); + fw_ver = firmware->data + offset; + if ((fw_ver[0] != BCM_5710_FW_MAJOR_VERSION) || + (fw_ver[1] != BCM_5710_FW_MINOR_VERSION) || + (fw_ver[2] != BCM_5710_FW_REVISION_VERSION) || + (fw_ver[3] != BCM_5710_FW_ENGINEERING_VERSION)) { + printk(KERN_ERR PFX "Bad FW version:%d.%d.%d.%d." + " Should be %d.%d.%d.%d\n", + fw_ver[0], fw_ver[1], fw_ver[2], + fw_ver[3], BCM_5710_FW_MAJOR_VERSION, + BCM_5710_FW_MINOR_VERSION, + BCM_5710_FW_REVISION_VERSION, + BCM_5710_FW_ENGINEERING_VERSION); + return -EINVAL; + } + + return 0; +} + +static void inline be32_to_cpu_n(const u8 *_source, u8 *_target, u32 n) +{ + u32 i; + const __be32 *source = (const __be32*)_source; + u32 *target = (u32*)_target; + + for (i = 0; i < n/4; i++) + target[i] = be32_to_cpu(source[i]); +} + +/* + Ops array is stored in the following format: + {op(8bit), offset(24bit, big endian), data(32bit, big endian)} + */ +static void inline bnx2x_prep_ops(const u8 *_source, u8 *_target, u32 n) +{ + u32 i, j, tmp; + const __be32 *source = (const __be32*)_source; + struct raw_op *target = (struct raw_op*)_target; + + for (i = 0, j = 0; i < n/8; i++, j+=2) { + tmp = be32_to_cpu(source[j]); + target[i].op = (tmp >> 24) & 0xff; + target[i].offset = tmp & 0xffffff; + target[i].raw_data = be32_to_cpu(source[j+1]); + } +} +static void inline be16_to_cpu_n(const u8 *_source, u8 *_target, u32 n) +{ + u32 i; + u16 *target = (u16*)_target; + const __be16 *source = (const __be16*)_source; + + for (i = 0; i < n/2; i++) + target[i] = be16_to_cpu(source[i]); +} + +#define BNX2X_ALLOC_AND_SET(arr, lbl, func) \ + do { \ + u32 len = be32_to_cpu(fw_hdr->arr.len); \ + bp->arr = kmalloc(len, GFP_KERNEL); \ + if (!bp->arr) { \ + printk(KERN_ERR PFX "Failed to allocate %d bytes for "#arr"\n", len); \ + goto lbl; \ + } \ + func(bp->firmware->data + \ + be32_to_cpu(fw_hdr->arr.offset), \ + (u8*)bp->arr, len); \ + } while (0) + + +static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev) +{ + char fw_file_name[40] = {0}; + int rc, offset; + struct bnx2x_fw_file_hdr *fw_hdr; + + /* Create a FW file name */ + if (CHIP_IS_E1(bp)) + offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1); + else + offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1H); + + sprintf(fw_file_name + offset, "%d.%d.%d.%d.fw", + BCM_5710_FW_MAJOR_VERSION, + BCM_5710_FW_MINOR_VERSION, + BCM_5710_FW_REVISION_VERSION, + BCM_5710_FW_ENGINEERING_VERSION); + + printk(KERN_INFO PFX "Loading %s\n", fw_file_name); + + rc = request_firmware(&bp->firmware, fw_file_name, dev); + if (rc) { + printk(KERN_ERR PFX "Can't load firmware file %s\n", fw_file_name); + goto request_firmware_exit; + } + + rc = bnx2x_check_firmware(bp); + if (rc) { + printk(KERN_ERR PFX "Corrupt firmware file %s\n", fw_file_name); + goto request_firmware_exit; + } + + fw_hdr = (struct bnx2x_fw_file_hdr *)bp->firmware->data; + + /* Initialize the pointers to the init arrays */ + /* Blob */ + BNX2X_ALLOC_AND_SET(init_data, request_firmware_exit, be32_to_cpu_n); + + /* Opcodes */ + BNX2X_ALLOC_AND_SET(init_ops, init_ops_alloc_err, bnx2x_prep_ops); + + /* Offsets */ + BNX2X_ALLOC_AND_SET(init_ops_offsets, init_offsets_alloc_err, be16_to_cpu_n); + + /* STORMs firmware */ + bp->tsem_int_table_data = bp->firmware->data + + be32_to_cpu(fw_hdr->tsem_int_table_data.offset); + bp->tsem_pram_data = bp->firmware->data + + be32_to_cpu(fw_hdr->tsem_pram_data.offset); + bp->usem_int_table_data = bp->firmware->data + + be32_to_cpu(fw_hdr->usem_int_table_data.offset); + bp->usem_pram_data = bp->firmware->data + + be32_to_cpu(fw_hdr->usem_pram_data.offset); + bp->xsem_int_table_data = bp->firmware->data + + be32_to_cpu(fw_hdr->xsem_int_table_data.offset); + bp->xsem_pram_data = bp->firmware->data + + be32_to_cpu(fw_hdr->xsem_pram_data.offset); + bp->csem_int_table_data = bp->firmware->data + + be32_to_cpu(fw_hdr->csem_int_table_data.offset); + bp->csem_pram_data = bp->firmware->data + + be32_to_cpu(fw_hdr->csem_pram_data.offset); + + return 0; +init_offsets_alloc_err: + kfree(bp->init_ops); +init_ops_alloc_err: + kfree(bp->init_data); +request_firmware_exit: + release_firmware(bp->firmware); + + return rc; +} + + static int __devinit bnx2x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) @@ -11116,6 +11322,13 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, if (rc) goto init_one_exit; + /* Set init arrays */ + rc = bnx2x_init_firmware(bp, &pdev->dev); + if (rc) { + printk(KERN_ERR PFX "Error loading firmware\n"); + goto init_one_exit; + } + rc = register_netdev(dev); if (rc) { dev_err(&pdev->dev, "Cannot register net device\n"); @@ -11163,6 +11376,11 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev) unregister_netdev(dev); + kfree(bp->init_ops_offsets); + kfree(bp->init_ops); + kfree(bp->init_data); + release_firmware(bp->firmware); + if (bp->regview) iounmap(bp->regview); @@ -11431,3 +11649,4 @@ static void __exit bnx2x_cleanup(void) module_init(bnx2x_init); module_exit(bnx2x_cleanup); + diff --git a/firmware/Makefile b/firmware/Makefile index 25200d1..1c670e0 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -32,6 +32,7 @@ fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \ adaptec/starfire_tx.bin fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw +fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-4.8.53.0.fw bnx2x-e1h-4.8.53.0.fw fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-4.6.17.fw \ bnx2/bnx2-rv2p-09-4.6.15.fw \ bnx2/bnx2-mips-06-4.6.16.fw \ diff --git a/firmware/WHENCE b/firmware/WHENCE index 4c52984..c1e9c5a 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -618,6 +618,26 @@ Found in hex form in kernel source. -------------------------------------------------------------------------- +Driver: bnx2x: Broadcom Everest + +File: bnx2x-e1-4.8.53.0.fw.ihex +File: bnx2x-e1h-4.8.53.0.fw.ihex + +License: + Copyright (c) 2007-2009 Broadcom Corporation + + This file contains firmware data derived from proprietary unpublished + source code, Copyright (c) 2007-2009 Broadcom Corporation. + + Permission is hereby granted for the distribution of this firmware data + in hexadecimal or equivalent format, provided this copyright notice is + accompanying it. + + +Found in hex form in kernel source. + +-------------------------------------------------------------------------- + Driver: BNX2 - Broadcom NetXtremeII File: bnx2/bnx2-mips-06-4.6.16.fw |