diff options
author | Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> | 2008-01-16 14:45:20 (GMT) |
---|---|---|
committer | David Woodhouse <dwmw2@infradead.org> | 2008-04-22 17:11:35 (GMT) |
commit | c3f08b353519ee9c64308837199a9fcf83e863da (patch) | |
tree | e50b0fa304b93e2f1ff429e9a4108ecbf9902275 | |
parent | 7fe9296c80e9a4ee51b43fbfbceb5143751a9d5c (diff) | |
download | linux-fsl-qoriq-c3f08b353519ee9c64308837199a9fcf83e863da.tar.xz |
[MTD] [MAPS] add support for Nvidia MCP55 to ck804xrom
This patch extends the existing MAPS driver for the Nvidia CK804 chipset
(ck804xrom.c) to also work on the Nvidia MCP55 chipset. As both chipsets
are rather similar, suporting them both with the same driver is easy.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-rw-r--r-- | drivers/mtd/maps/ck804xrom.c | 89 |
1 files changed, 62 insertions, 27 deletions
diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c index 688ef49..59d8fb4 100644 --- a/drivers/mtd/maps/ck804xrom.c +++ b/drivers/mtd/maps/ck804xrom.c @@ -28,6 +28,9 @@ #define ROM_PROBE_STEP_SIZE (64*1024) +#define DEV_CK804 1 +#define DEV_MCP55 2 + struct ck804xrom_window { void __iomem *virt; unsigned long phys; @@ -45,8 +48,9 @@ struct ck804xrom_map_info { char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN]; }; - -/* The 2 bits controlling the window size are often set to allow reading +/* + * The following applies to ck804 only: + * The 2 bits controlling the window size are often set to allow reading * the BIOS, but too small to allow writing, since the lock registers are * 4MiB lower in the address space than the data. * @@ -58,10 +62,17 @@ struct ck804xrom_map_info { * If only the 7 Bit is set, it is a 4MiB window. Otherwise, a * 64KiB window. * + * The following applies to mcp55 only: + * The 15 bits controlling the window size are distributed as follows: + * byte @0x88: bit 0..7 + * byte @0x8c: bit 8..15 + * word @0x90: bit 16..30 + * If all bits are enabled, we have a 16? MiB window + * Please set win_size_bits to 0x7fffffff if you actually want to do something */ static uint win_size_bits = 0; module_param(win_size_bits, uint, 0); -MODULE_PARM_DESC(win_size_bits, "ROM window size bits override for 0x88 byte, normally set by BIOS."); +MODULE_PARM_DESC(win_size_bits, "ROM window size bits override, normally set by BIOS."); static struct ck804xrom_window ck804xrom_window = { .maps = LIST_HEAD_INIT(ck804xrom_window.maps), @@ -102,10 +113,11 @@ static void ck804xrom_cleanup(struct ck804xrom_window *window) static int __devinit ck804xrom_init_one (struct pci_dev *pdev, - const struct pci_device_id *ent) + const struct pci_device_id *ent) { static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL }; u8 byte; + u16 word; struct ck804xrom_window *window = &ck804xrom_window; struct ck804xrom_map_info *map = NULL; unsigned long map_top; @@ -113,26 +125,42 @@ static int __devinit ck804xrom_init_one (struct pci_dev *pdev, /* Remember the pci dev I find the window in */ window->pdev = pci_dev_get(pdev); - /* Enable the selected rom window. This is often incorrectly - * set up by the BIOS, and the 4MiB offset for the lock registers - * requires the full 5MiB of window space. - * - * This 'write, then read' approach leaves the bits for - * other uses of the hardware info. - */ - pci_read_config_byte(pdev, 0x88, &byte); - pci_write_config_byte(pdev, 0x88, byte | win_size_bits ); - - - /* Assume the rom window is properly setup, and find it's size */ - pci_read_config_byte(pdev, 0x88, &byte); - - if ((byte & ((1<<7)|(1<<6))) == ((1<<7)|(1<<6))) - window->phys = 0xffb00000; /* 5MiB */ - else if ((byte & (1<<7)) == (1<<7)) - window->phys = 0xffc00000; /* 4MiB */ - else - window->phys = 0xffff0000; /* 64KiB */ + switch (ent->driver_data) { + case DEV_CK804: + /* Enable the selected rom window. This is often incorrectly + * set up by the BIOS, and the 4MiB offset for the lock registers + * requires the full 5MiB of window space. + * + * This 'write, then read' approach leaves the bits for + * other uses of the hardware info. + */ + pci_read_config_byte(pdev, 0x88, &byte); + pci_write_config_byte(pdev, 0x88, byte | win_size_bits ); + + /* Assume the rom window is properly setup, and find it's size */ + pci_read_config_byte(pdev, 0x88, &byte); + + if ((byte & ((1<<7)|(1<<6))) == ((1<<7)|(1<<6))) + window->phys = 0xffb00000; /* 5MiB */ + else if ((byte & (1<<7)) == (1<<7)) + window->phys = 0xffc00000; /* 4MiB */ + else + window->phys = 0xffff0000; /* 64KiB */ + break; + + case DEV_MCP55: + pci_read_config_byte(pdev, 0x88, &byte); + pci_write_config_byte(pdev, 0x88, byte | (win_size_bits & 0xff)); + + pci_read_config_byte(pdev, 0x8c, &byte); + pci_write_config_byte(pdev, 0x8c, byte | ((win_size_bits & 0xff00) >> 8)); + + pci_read_config_word(pdev, 0x90, &word); + pci_write_config_word(pdev, 0x90, word | ((win_size_bits & 0x7fff0000) >> 16)); + + window->phys = 0xff000000; /* 16MiB, hardcoded for now */ + break; + } window->size = 0xffffffffUL - window->phys + 1UL; @@ -303,8 +331,15 @@ static void __devexit ck804xrom_remove_one (struct pci_dev *pdev) } static struct pci_device_id ck804xrom_pci_tbl[] = { - { PCI_VENDOR_ID_NVIDIA, 0x0051, - PCI_ANY_ID, PCI_ANY_ID, }, /* nvidia ck804 */ + { PCI_VENDOR_ID_NVIDIA, 0x0051, PCI_ANY_ID, PCI_ANY_ID, DEV_CK804 }, + { PCI_VENDOR_ID_NVIDIA, 0x0360, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, + { PCI_VENDOR_ID_NVIDIA, 0x0361, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, + { PCI_VENDOR_ID_NVIDIA, 0x0362, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, + { PCI_VENDOR_ID_NVIDIA, 0x0363, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, + { PCI_VENDOR_ID_NVIDIA, 0x0364, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, + { PCI_VENDOR_ID_NVIDIA, 0x0365, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, + { PCI_VENDOR_ID_NVIDIA, 0x0366, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, + { PCI_VENDOR_ID_NVIDIA, 0x0367, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, { 0, } }; @@ -332,7 +367,7 @@ static int __init init_ck804xrom(void) break; } if (pdev) { - retVal = ck804xrom_init_one(pdev, &ck804xrom_pci_tbl[0]); + retVal = ck804xrom_init_one(pdev, id); pci_dev_put(pdev); return retVal; } |