diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-03-16 03:01:36 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-03-16 03:01:36 (GMT) |
commit | d10902812c9cd5583130a4ebb9ad19c60b68149d (patch) | |
tree | b1b28587970e8cebf74ba4d61edf49537f619ab7 | |
parent | 181f977d134a9f8e3f8839f42af655b045fc059e (diff) | |
parent | 25874a299ef8037df03ce4ada570bc4e42f9748f (diff) | |
download | linux-fsl-qoriq-d10902812c9cd5583130a4ebb9ad19c60b68149d.tar.xz |
Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits)
x86: Clean up apic.c and apic.h
x86: Remove superflous goal definition of tsc_sync
x86: dt: Correct local apic documentation in device tree bindings
x86: dt: Cleanup local apic setup
x86: dt: Fix OLPC=y/INTEL_CE=n build
rtc: cmos: Add OF bindings
x86: ce4100: Use OF to setup devices
x86: ioapic: Add OF bindings for IO_APIC
x86: dtb: Add generic bus probe
x86: dtb: Add support for PCI devices backed by dtb nodes
x86: dtb: Add device tree support for HPET
x86: dtb: Add early parsing of IO_APIC
x86: dtb: Add irq domain abstraction
x86: dtb: Add a device tree for CE4100
x86: Add device tree support
x86: e820: Remove conditional early mapping in parse_e820_ext
x86: OLPC: Make OLPC=n build again
x86: OLPC: Remove extra OLPC_OPENFIRMWARE_DT indirection
x86: OLPC: Cleanup config maze completely
x86: OLPC: Hide OLPC_OPENFIRMWARE config switch
...
Fix up conflicts in arch/x86/platform/ce4100/ce4100.c
56 files changed, 1478 insertions, 417 deletions
diff --git a/Documentation/devicetree/bindings/i2c/ce4100-i2c.txt b/Documentation/devicetree/bindings/i2c/ce4100-i2c.txt new file mode 100644 index 0000000..569b162 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/ce4100-i2c.txt @@ -0,0 +1,93 @@ +CE4100 I2C +---------- + +CE4100 has one PCI device which is described as the I2C-Controller. This +PCI device has three PCI-bars, each bar contains a complete I2C +controller. So we have a total of three independent I2C-Controllers +which share only an interrupt line. +The driver is probed via the PCI-ID and is gathering the information of +attached devices from the devices tree. +Grant Likely recommended to use the ranges property to map the PCI-Bar +number to its physical address and to use this to find the child nodes +of the specific I2C controller. This were his exact words: + + Here's where the magic happens. Each entry in + ranges describes how the parent pci address space + (middle group of 3) is translated to the local + address space (first group of 2) and the size of + each range (last cell). In this particular case, + the first cell of the local address is chosen to be + 1:1 mapped to the BARs, and the second is the + offset from be base of the BAR (which would be + non-zero if you had 2 or more devices mapped off + the same BAR) + + ranges allows the address mapping to be described + in a way that the OS can interpret without + requiring custom device driver code. + +This is an example which is used on FalconFalls: +------------------------------------------------ + i2c-controller@b,2 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "pci8086,2e68.2", + "pci8086,2e68", + "pciclass,ff0000", + "pciclass,ff00"; + + reg = <0x15a00 0x0 0x0 0x0 0x0>; + interrupts = <16 1>; + + /* as described by Grant, the first number in the group of + * three is the bar number followed by the 64bit bar address + * followed by size of the mapping. The bar address + * requires also a valid translation in parents ranges + * property. + */ + ranges = <0 0 0x02000000 0 0xdffe0500 0x100 + 1 0 0x02000000 0 0xdffe0600 0x100 + 2 0 0x02000000 0 0xdffe0700 0x100>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + + /* The first number in the reg property is the + * number of the bar + */ + reg = <0 0 0x100>; + + /* This I2C controller has no devices */ + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <1 0 0x100>; + + /* This I2C controller has one gpio controller */ + gpio@26 { + #gpio-cells = <2>; + compatible = "ti,pcf8575"; + reg = <0x26>; + gpio-controller; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <2 0 0x100>; + + gpio@26 { + #gpio-cells = <2>; + compatible = "ti,pcf8575"; + reg = <0x26>; + gpio-controller; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-cmos.txt b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt new file mode 100644 index 0000000..7382989 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-cmos.txt @@ -0,0 +1,28 @@ + Motorola mc146818 compatible RTC +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Required properties: + - compatible : "motorola,mc146818" + - reg : should contain registers location and length. + +Optional properties: + - interrupts : should contain interrupt. + - interrupt-parent : interrupt source phandle. + - ctrl-reg : Contains the initial value of the control register also + called "Register B". + - freq-reg : Contains the initial value of the frequency register also + called "Regsiter A". + +"Register A" and "B" are usually initialized by the firmware (BIOS for +instance). If this is not done, it can be performed by the driver. + +ISA Example: + + rtc@70 { + compatible = "motorola,mc146818"; + interrupts = <8 3>; + interrupt-parent = <&ioapic1>; + ctrl-reg = <2>; + freq-reg = <0x26>; + reg = <1 0x70 2>; + }; diff --git a/Documentation/devicetree/bindings/x86/ce4100.txt b/Documentation/devicetree/bindings/x86/ce4100.txt new file mode 100644 index 0000000..b49ae59 --- /dev/null +++ b/Documentation/devicetree/bindings/x86/ce4100.txt @@ -0,0 +1,38 @@ +CE4100 Device Tree Bindings +--------------------------- + +The CE4100 SoC uses for in core peripherals the following compatible +format: <vendor>,<chip>-<device>. +Many of the "generic" devices like HPET or IO APIC have the ce4100 +name in their compatible property because they first appeared in this +SoC. + +The CPU node +------------ + cpu@0 { + device_type = "cpu"; + compatible = "intel,ce4100"; + reg = <0>; + lapic = <&lapic0>; + }; + +The reg property describes the CPU number. The lapic property points to +the local APIC timer. + +The SoC node +------------ + +This node describes the in-core peripherals. Required property: + compatible = "intel,ce4100-cp"; + +The PCI node +------------ +This node describes the PCI bus on the SoC. Its property should be + compatible = "intel,ce4100-pci", "pci"; + +If the OS is using the IO-APIC for interrupt routing then the reported +interrupt numbers for devices is no longer true. In order to obtain the +correct interrupt number, the child node which represents the device has +to contain the interrupt property. Besides the interrupt property it has +to contain at least the reg property containing the PCI bus address and +compatible property according to "PCI Bus Binding Revision 2.1". diff --git a/Documentation/devicetree/bindings/x86/interrupt.txt b/Documentation/devicetree/bindings/x86/interrupt.txt new file mode 100644 index 0000000..7d19f49 --- /dev/null +++ b/Documentation/devicetree/bindings/x86/interrupt.txt @@ -0,0 +1,26 @@ +Interrupt chips +--------------- + +* Intel I/O Advanced Programmable Interrupt Controller (IO APIC) + + Required properties: + -------------------- + compatible = "intel,ce4100-ioapic"; + #interrupt-cells = <2>; + + Device's interrupt property: + + interrupts = <P S>; + + The first number (P) represents the interrupt pin which is wired to the + IO APIC. The second number (S) represents the sense of interrupt which + should be configured and can be one of: + 0 - Edge Rising + 1 - Level Low + 2 - Level High + 3 - Edge Falling + +* Local APIC + Required property: + + compatible = "intel,ce4100-lapic"; diff --git a/Documentation/devicetree/bindings/x86/timer.txt b/Documentation/devicetree/bindings/x86/timer.txt new file mode 100644 index 0000000..c688af5 --- /dev/null +++ b/Documentation/devicetree/bindings/x86/timer.txt @@ -0,0 +1,6 @@ +Timers +------ + +* High Precision Event Timer (HPET) + Required property: + compatible = "intel,ce4100-hpet"; diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index 28b1c9d..55fd262 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -13,6 +13,7 @@ Table of Contents I - Introduction 1) Entry point for arch/powerpc + 2) Entry point for arch/x86 II - The DT block format 1) Header @@ -225,6 +226,25 @@ it with special cases. cannot support both configurations with Book E and configurations with classic Powerpc architectures. +2) Entry point for arch/x86 +------------------------------- + + There is one single 32bit entry point to the kernel at code32_start, + the decompressor (the real mode entry point goes to the same 32bit + entry point once it switched into protected mode). That entry point + supports one calling convention which is documented in + Documentation/x86/boot.txt + The physical pointer to the device-tree block (defined in chapter II) + is passed via setup_data which requires at least boot protocol 2.09. + The type filed is defined as + + #define SETUP_DTB 2 + + This device-tree is used as an extension to the "boot page". As such it + does not parse / consider data which is already covered by the boot + page. This includes memory size, reserved ranges, command line arguments + or initrd address. It simply holds information which can not be retrieved + otherwise like interrupt routing or a list of devices behind an I2C bus. II - The DT block format ======================== diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h index 0c68764..1071766 100644 --- a/arch/microblaze/include/asm/pci-bridge.h +++ b/arch/microblaze/include/asm/pci-bridge.h @@ -104,11 +104,22 @@ struct pci_controller { int global_number; /* PCI domain number */ }; +#ifdef CONFIG_PCI static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) { return bus->sysdata; } +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) +{ + struct pci_controller *host; + + if (bus->self) + return pci_device_to_OF_node(bus->self); + host = pci_bus_to_host(bus); + return host ? host->dn : NULL; +} + static inline int isa_vaddr_is_ioport(void __iomem *address) { /* No specific ISA handling on ppc32 at this stage, it @@ -116,6 +127,7 @@ static inline int isa_vaddr_is_ioport(void __iomem *address) */ return 0; } +#endif /* CONFIG_PCI */ /* These are used for config access before all the PCI probing has been done. */ diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h index 2e72af0..d0890d3 100644 --- a/arch/microblaze/include/asm/prom.h +++ b/arch/microblaze/include/asm/prom.h @@ -64,21 +64,6 @@ extern void kdump_move_device_tree(void); /* CPU OF node matching */ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); -/** - * of_irq_map_pci - Resolve the interrupt for a PCI device - * @pdev: the device whose interrupt is to be resolved - * @out_irq: structure of_irq filled by this function - * - * This function resolves the PCI interrupt for a given PCI device. If a - * device-node exists for a given pci_dev, it will use normal OF tree - * walking. If not, it will implement standard swizzling and walk up the - * PCI tree until an device-node is found, at which point it will finish - * resolving using the OF tree walking. - */ -struct pci_dev; -struct of_irq; -extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c index 9ae24f4..47187cc 100644 --- a/arch/microblaze/kernel/prom_parse.c +++ b/arch/microblaze/kernel/prom_parse.c @@ -2,88 +2,11 @@ #include <linux/kernel.h> #include <linux/string.h> -#include <linux/pci_regs.h> #include <linux/module.h> #include <linux/ioport.h> #include <linux/etherdevice.h> #include <linux/of_address.h> #include <asm/prom.h> -#include <asm/pci-bridge.h> - -#ifdef CONFIG_PCI -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) -{ - struct device_node *dn, *ppnode; - struct pci_dev *ppdev; - u32 lspec; - u32 laddr[3]; - u8 pin; - int rc; - - /* Check if we have a device node, if yes, fallback to standard OF - * parsing - */ - dn = pci_device_to_OF_node(pdev); - if (dn) - return of_irq_map_one(dn, 0, out_irq); - - /* Ok, we don't, time to have fun. Let's start by building up an - * interrupt spec. we assume #interrupt-cells is 1, which is standard - * for PCI. If you do different, then don't use that routine. - */ - rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); - if (rc != 0) - return rc; - /* No pin, exit */ - if (pin == 0) - return -ENODEV; - - /* Now we walk up the PCI tree */ - lspec = pin; - for (;;) { - /* Get the pci_dev of our parent */ - ppdev = pdev->bus->self; - - /* Ouch, it's a host bridge... */ - if (ppdev == NULL) { - struct pci_controller *host; - host = pci_bus_to_host(pdev->bus); - ppnode = host ? host->dn : NULL; - /* No node for host bridge ? give up */ - if (ppnode == NULL) - return -EINVAL; - } else - /* We found a P2P bridge, check if it has a node */ - ppnode = pci_device_to_OF_node(ppdev); - - /* Ok, we have found a parent with a device-node, hand over to - * the OF parsing code. - * We build a unit address from the linux device to be used for - * resolution. Note that we use the linux bus number which may - * not match your firmware bus numbering. - * Fortunately, in most cases, interrupt-map-mask doesn't - * include the bus number as part of the matching. - * You should still be careful about that though if you intend - * to rely on this function (you ship a firmware that doesn't - * create device nodes for all PCI devices). - */ - if (ppnode) - break; - - /* We can only get here if we hit a P2P bridge with no node, - * let's do standard swizzling and try again - */ - lspec = pci_swizzle_interrupt_pin(pdev, lspec); - pdev = ppdev; - } - - laddr[0] = (pdev->bus->number << 16) - | (pdev->devfn << 8); - laddr[1] = laddr[2] = 0; - return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq); -} -EXPORT_SYMBOL_GPL(of_irq_map_pci); -#endif /* CONFIG_PCI */ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, unsigned long *busno, unsigned long *phys, unsigned long *size) diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c index e363615..1e01a12 100644 --- a/arch/microblaze/pci/pci-common.c +++ b/arch/microblaze/pci/pci-common.c @@ -29,6 +29,7 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/of_pci.h> #include <asm/processor.h> #include <asm/io.h> diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 51e9e6f..edeb80f 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -171,6 +171,16 @@ static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) return bus->sysdata; } +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) +{ + struct pci_controller *host; + + if (bus->self) + return pci_device_to_OF_node(bus->self); + host = pci_bus_to_host(bus); + return host ? host->dn : NULL; +} + static inline int isa_vaddr_is_ioport(void __iomem *address) { /* No specific ISA handling on ppc32 at this stage, it diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h index d727575..c189aa5 100644 --- a/arch/powerpc/include/asm/prom.h +++ b/arch/powerpc/include/asm/prom.h @@ -70,21 +70,6 @@ static inline int of_node_to_nid(struct device_node *device) { return 0; } #endif #define of_node_to_nid of_node_to_nid -/** - * of_irq_map_pci - Resolve the interrupt for a PCI device - * @pdev: the device whose interrupt is to be resolved - * @out_irq: structure of_irq filled by this function - * - * This function resolves the PCI interrupt for a given PCI device. If a - * device-node exists for a given pci_dev, it will use normal OF tree - * walking. If not, it will implement standard swizzling and walk up the - * PCI tree until an device-node is found, at which point it will finish - * resolving using the OF tree walking. - */ -struct pci_dev; -struct of_irq; -extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); - extern void of_instantiate_rtc(void); /* These includes are put at the bottom because they may contain things diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 10a44e6..eb341be 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -22,6 +22,7 @@ #include <linux/init.h> #include <linux/bootmem.h> #include <linux/of_address.h> +#include <linux/of_pci.h> #include <linux/mm.h> #include <linux/list.h> #include <linux/syscalls.h> diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index c2b7a07..47187cc 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -2,95 +2,11 @@ #include <linux/kernel.h> #include <linux/string.h> -#include <linux/pci_regs.h> #include <linux/module.h> #include <linux/ioport.h> #include <linux/etherdevice.h> #include <linux/of_address.h> #include <asm/prom.h> -#include <asm/pci-bridge.h> - -#ifdef CONFIG_PCI -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) -{ - struct device_node *dn, *ppnode; - struct pci_dev *ppdev; - u32 lspec; - u32 laddr[3]; - u8 pin; - int rc; - - /* Check if we have a device node, if yes, fallback to standard OF - * parsing - */ - dn = pci_device_to_OF_node(pdev); - if (dn) { - rc = of_irq_map_one(dn, 0, out_irq); - if (!rc) - return rc; - } - - /* Ok, we don't, time to have fun. Let's start by building up an - * interrupt spec. we assume #interrupt-cells is 1, which is standard - * for PCI. If you do different, then don't use that routine. - */ - rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); - if (rc != 0) - return rc; - /* No pin, exit */ - if (pin == 0) - return -ENODEV; - - /* Now we walk up the PCI tree */ - lspec = pin; - for (;;) { - /* Get the pci_dev of our parent */ - ppdev = pdev->bus->self; - - /* Ouch, it's a host bridge... */ - if (ppdev == NULL) { -#ifdef CONFIG_PPC64 - ppnode = pci_bus_to_OF_node(pdev->bus); -#else - struct pci_controller *host; - host = pci_bus_to_host(pdev->bus); - ppnode = host ? host->dn : NULL; -#endif - /* No node for host bridge ? give up */ - if (ppnode == NULL) - return -EINVAL; - } else - /* We found a P2P bridge, check if it has a node */ - ppnode = pci_device_to_OF_node(ppdev); - - /* Ok, we have found a parent with a device-node, hand over to - * the OF parsing code. - * We build a unit address from the linux device to be used for - * resolution. Note that we use the linux bus number which may - * not match your firmware bus numbering. - * Fortunately, in most cases, interrupt-map-mask doesn't include - * the bus number as part of the matching. - * You should still be careful about that though if you intend - * to rely on this function (you ship a firmware that doesn't - * create device nodes for all PCI devices). - */ - if (ppnode) - break; - - /* We can only get here if we hit a P2P bridge with no node, - * let's do standard swizzling and try again - */ - lspec = pci_swizzle_interrupt_pin(pdev, lspec); - pdev = ppdev; - } - - laddr[0] = (pdev->bus->number << 16) - | (pdev->devfn << 8); - laddr[1] = laddr[2] = 0; - return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq); -} -EXPORT_SYMBOL_GPL(of_irq_map_pci); -#endif /* CONFIG_PCI */ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, unsigned long *busno, unsigned long *phys, unsigned long *size) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 159c2ff..f8958b0 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -386,6 +386,8 @@ config X86_INTEL_CE depends on X86_32 depends on X86_EXTENDED_PLATFORM select X86_REBOOTFIXUPS + select OF + select OF_EARLY_FLATTREE ---help--- Select for the Intel CE media processor (CE4100) SOC. This option compiles in support for the CE4100 SOC for settop @@ -2070,9 +2072,10 @@ config SCx200HR_TIMER config OLPC bool "One Laptop Per Child support" + depends on !X86_PAE select GPIOLIB - select OLPC_OPENFIRMWARE - depends on !X86_64 && !X86_PAE + select OF + select OF_PROMTREE if PROC_DEVICETREE ---help--- Add support for detecting the unique features of the OLPC XO hardware. @@ -2083,21 +2086,6 @@ config OLPC_XO1 ---help--- Add support for non-essential features of the OLPC XO-1 laptop. -config OLPC_OPENFIRMWARE - bool "Support for OLPC's Open Firmware" - depends on !X86_64 && !X86_PAE - default n - select OF - help - This option adds support for the implementation of Open Firmware - that is used on the OLPC XO-1 Children's Machine. - If unsure, say N here. - -config OLPC_OPENFIRMWARE_DT - bool - default y if OLPC_OPENFIRMWARE && PROC_DEVICETREE - select OF_PROMTREE - endif # X86_32 config AMD_NB diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index b8a3484..a279d98 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -220,7 +220,6 @@ extern void enable_IR_x2apic(void); extern int get_physical_broadcast(void); -extern void apic_disable(void); extern int lapic_get_maxlvt(void); extern void clear_local_APIC(void); extern void connect_bsp_APIC(void); @@ -228,7 +227,6 @@ extern void disconnect_bsp_APIC(int virt_wire_setup); extern void disable_local_APIC(void); extern void lapic_shutdown(void); extern int verify_local_APIC(void); -extern void cache_APIC_registers(void); extern void sync_Arb_IDs(void); extern void init_bsp_APIC(void); extern void setup_local_APIC(void); @@ -239,8 +237,7 @@ void register_lapic_address(unsigned long address); extern void setup_boot_APIC_clock(void); extern void setup_secondary_APIC_clock(void); extern int APIC_init_uniprocessor(void); -extern void enable_NMI_through_LVT0(void); -extern int apic_force_enable(void); +extern int apic_force_enable(unsigned long addr); /* * On 32bit this is mach-xxx local @@ -261,7 +258,6 @@ static inline void lapic_shutdown(void) { } #define local_apic_timer_c2_ok 1 static inline void init_apic_mappings(void) { } static inline void disable_local_APIC(void) { } -static inline void apic_disable(void) { } # define setup_boot_APIC_clock x86_init_noop # define setup_secondary_APIC_clock x86_init_noop #endif /* !CONFIG_X86_LOCAL_APIC */ diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h index c8bfe63..e020d88 100644 --- a/arch/x86/include/asm/bootparam.h +++ b/arch/x86/include/asm/bootparam.h @@ -12,6 +12,7 @@ /* setup data types */ #define SETUP_NONE 0 #define SETUP_E820_EXT 1 +#define SETUP_DTB 2 /* extensible setup data list node */ struct setup_data { diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h index e99d55d..908b969 100644 --- a/arch/x86/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h @@ -96,7 +96,7 @@ extern void e820_setup_gap(void); extern int e820_search_gap(unsigned long *gapstart, unsigned long *gapsize, unsigned long start_addr, unsigned long long end_addr); struct setup_data; -extern void parse_e820_ext(struct setup_data *data, unsigned long pa_data); +extern void parse_e820_ext(struct setup_data *data); #if defined(CONFIG_X86_64) || \ (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION)) diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h index c704b38..ba870bb 100644 --- a/arch/x86/include/asm/irq.h +++ b/arch/x86/include/asm/irq.h @@ -10,9 +10,6 @@ #include <asm/apicdef.h> #include <asm/irq_vectors.h> -/* Even though we don't support this, supply it to appease OF */ -static inline void irq_dispose_mapping(unsigned int virq) { } - static inline int irq_canonicalize(int irq) { return ((irq == 2) ? 9 : irq); diff --git a/arch/x86/include/asm/irq_controller.h b/arch/x86/include/asm/irq_controller.h new file mode 100644 index 0000000..423bbbd --- /dev/null +++ b/arch/x86/include/asm/irq_controller.h @@ -0,0 +1,12 @@ +#ifndef __IRQ_CONTROLLER__ +#define __IRQ_CONTROLLER__ + +struct irq_domain { + int (*xlate)(struct irq_domain *h, const u32 *intspec, u32 intsize, + u32 *out_hwirq, u32 *out_type); + void *priv; + struct device_node *controller; + struct list_head l; +}; + +#endif diff --git a/arch/x86/include/asm/olpc_ofw.h b/arch/x86/include/asm/olpc_ofw.h index 641988e..c5d3a5a 100644 --- a/arch/x86/include/asm/olpc_ofw.h +++ b/arch/x86/include/asm/olpc_ofw.h @@ -6,7 +6,7 @@ #define OLPC_OFW_SIG 0x2057464F /* aka "OFW " */ -#ifdef CONFIG_OLPC_OPENFIRMWARE +#ifdef CONFIG_OLPC extern bool olpc_ofw_is_installed(void); @@ -26,19 +26,15 @@ extern void setup_olpc_ofw_pgd(void); /* check if OFW was detected during boot */ extern bool olpc_ofw_present(void); -#else /* !CONFIG_OLPC_OPENFIRMWARE */ - -static inline bool olpc_ofw_is_installed(void) { return false; } +#else /* !CONFIG_OLPC */ static inline void olpc_ofw_detect(void) { } static inline void setup_olpc_ofw_pgd(void) { } -static inline bool olpc_ofw_present(void) { return false; } - -#endif /* !CONFIG_OLPC_OPENFIRMWARE */ +#endif /* !CONFIG_OLPC */ -#ifdef CONFIG_OLPC_OPENFIRMWARE_DT +#ifdef CONFIG_OF_PROMTREE extern void olpc_dt_build_devicetree(void); #else static inline void olpc_dt_build_devicetree(void) { } -#endif /* CONFIG_OLPC_OPENFIRMWARE_DT */ +#endif #endif /* _ASM_X86_OLPC_OFW_H */ diff --git a/arch/x86/include/asm/prom.h b/arch/x86/include/asm/prom.h index b4ec95f..971e0b4 100644 --- a/arch/x86/include/asm/prom.h +++ b/arch/x86/include/asm/prom.h @@ -1 +1,69 @@ -/* dummy prom.h; here to make linux/of.h's #includes happy */ +/* + * Definitions for Device tree / OpenFirmware handling on X86 + * + * based on arch/powerpc/include/asm/prom.h which is + * Copyright (C) 1996-2005 Paul Mackerras. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _ASM_X86_PROM_H +#define _ASM_X86_PROM_H +#ifndef __ASSEMBLY__ + +#include <linux/of.h> +#include <linux/types.h> +#include <linux/pci.h> + +#include <asm/irq.h> +#include <asm/atomic.h> +#include <asm/setup.h> +#include <asm/irq_controller.h> + +#ifdef CONFIG_OF +extern int of_ioapic; +extern u64 initial_dtb; +extern void add_dtb(u64 data); +extern void x86_add_irq_domains(void); +void __cpuinit x86_of_pci_init(void); +void x86_dtb_init(void); + +static inline struct device_node *pci_device_to_OF_node(struct pci_dev *pdev) +{ + return pdev ? pdev->dev.of_node : NULL; +} + +static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus) +{ + return pci_device_to_OF_node(bus->self); +} + +#else +static inline void add_dtb(u64 data) { } +static inline void x86_add_irq_domains(void) { } +static inline void x86_of_pci_init(void) { } +static inline void x86_dtb_init(void) { } +#define of_ioapic 0 +#endif + +extern char cmd_line[COMMAND_LINE_SIZE]; + +#define pci_address_to_pio pci_address_to_pio +unsigned long pci_address_to_pio(phys_addr_t addr); + +/** + * irq_dispose_mapping - Unmap an interrupt + * @virq: linux virq number of the interrupt to unmap + * + * FIXME: We really should implement proper virq handling like power, + * but that's going to be major surgery. + */ +static inline void irq_dispose_mapping(unsigned int virq) { } + +#define HAVE_ARCH_DEVTREE_FIXUPS + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h index 64642ad..643ebf2 100644 --- a/arch/x86/include/asm/x86_init.h +++ b/arch/x86/include/asm/x86_init.h @@ -83,11 +83,13 @@ struct x86_init_paging { * boot cpu * @tsc_pre_init: platform function called before TSC init * @timer_init: initialize the platform timer (default PIT/HPET) + * @wallclock_init: init the wallclock device */ struct x86_init_timers { void (*setup_percpu_clockev)(void); void (*tsc_pre_init)(void); void (*timer_init)(void); + void (*wallclock_init)(void); }; /** diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 34244b2..62445ba 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -66,9 +66,9 @@ obj-$(CONFIG_PCI) += early-quirks.o apm-y := apm_32.o obj-$(CONFIG_APM) += apm.o obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_SMP) += smpboot.o tsc_sync.o +obj-$(CONFIG_SMP) += smpboot.o +obj-$(CONFIG_SMP) += tsc_sync.o obj-$(CONFIG_SMP) += setup_percpu.o -obj-$(CONFIG_X86_64_SMP) += tsc_sync.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o obj-$(CONFIG_X86_MPPARSE) += mpparse.o obj-y += apic/ @@ -109,6 +109,7 @@ obj-$(CONFIG_MICROCODE) += microcode.o obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o +obj-$(CONFIG_OF) += devicetree.o ### # 64 bit specific files diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c index 51d4e16..1293c70 100644 --- a/arch/x86/kernel/apb_timer.c +++ b/arch/x86/kernel/apb_timer.c @@ -508,64 +508,12 @@ static int apbt_next_event(unsigned long delta, return 0; } -/* - * APB timer clock is not in sync with pclk on Langwell, which translates to - * unreliable read value caused by sampling error. the error does not add up - * overtime and only happens when sampling a 0 as a 1 by mistake. so the time - * would go backwards. the following code is trying to prevent time traveling - * backwards. little bit paranoid. - */ static cycle_t apbt_read_clocksource(struct clocksource *cs) { - unsigned long t0, t1, t2; - static unsigned long last_read; - -bad_count: - t1 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - t2 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - if (unlikely(t1 < t2)) { - pr_debug("APBT: read current count error %lx:%lx:%lx\n", - t1, t2, t2 - t1); - goto bad_count; - } - /* - * check against cached last read, makes sure time does not go back. - * it could be a normal rollover but we will do tripple check anyway - */ - if (unlikely(t2 > last_read)) { - /* check if we have a normal rollover */ - unsigned long raw_intr_status = - apbt_readl_reg(APBTMRS_RAW_INT_STATUS); - /* - * cs timer interrupt is masked but raw intr bit is set if - * rollover occurs. then we read EOI reg to clear it. - */ - if (raw_intr_status & (1 << phy_cs_timer_id)) { - apbt_readl(phy_cs_timer_id, APBTMR_N_EOI); - goto out; - } - pr_debug("APB CS going back %lx:%lx:%lx ", - t2, last_read, t2 - last_read); -bad_count_x3: - pr_debug("triple check enforced\n"); - t0 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - udelay(1); - t1 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - udelay(1); - t2 = apbt_readl(phy_cs_timer_id, - APBTMR_N_CURRENT_VALUE); - if ((t2 > t1) || (t1 > t0)) { - printk(KERN_ERR "Error: APB CS tripple check failed\n"); - goto bad_count_x3; - } - } -out: - last_read = t2; - return (cycle_t)~t2; + unsigned long current_count; + + current_count = apbt_readl(phy_cs_timer_id, APBTMR_N_CURRENT_VALUE); + return (cycle_t)~current_count; } static int apbt_clocksource_register(void) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 562a832..966673f 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -93,7 +93,7 @@ DEFINE_EARLY_PER_CPU(int, x86_cpu_to_logical_apicid, BAD_APICID); * * +1=force-enable */ -static int force_enable_local_apic; +static int force_enable_local_apic __initdata; /* * APIC command line parameters */ @@ -163,7 +163,7 @@ early_param("nox2apic", setup_nox2apic); unsigned long mp_lapic_addr; int disable_apic; /* Disable local APIC timer from the kernel commandline or via dmi quirk */ -static int disable_apic_timer __cpuinitdata; +static int disable_apic_timer __initdata; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); @@ -187,29 +187,8 @@ static struct resource lapic_resource = { static unsigned int calibration_result; -static int lapic_next_event(unsigned long delta, - struct clock_event_device *evt); -static void lapic_timer_setup(enum clock_event_mode mode, - struct clock_event_device *evt); -static void lapic_timer_broadcast(const struct cpumask *mask); static void apic_pm_activate(void); -/* - * The local apic timer can be used for any function which is CPU local. - */ -static struct clock_event_device lapic_clockevent = { - .name = "lapic", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT - | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY, - .shift = 32, - .set_mode = lapic_timer_setup, - .set_next_event = lapic_next_event, - .broadcast = lapic_timer_broadcast, - .rating = 100, - .irq = -1, -}; -static DEFINE_PER_CPU(struct clock_event_device, lapic_events); - static unsigned long apic_phys; /* @@ -248,7 +227,7 @@ static int modern_apic(void) * right after this call apic become NOOP driven * so apic->write/read doesn't do anything */ -void apic_disable(void) +static void __init apic_disable(void) { pr_info("APIC: switched to apic NOOP\n"); apic = &apic_noop; @@ -292,23 +271,6 @@ u64 native_apic_icr_read(void) return icr1 | ((u64)icr2 << 32); } -/** - * enable_NMI_through_LVT0 - enable NMI through local vector table 0 - */ -void __cpuinit enable_NMI_through_LVT0(void) -{ - unsigned int v; - - /* unmask and set to NMI */ - v = APIC_DM_NMI; - - /* Level triggered for 82489DX (32bit mode) */ - if (!lapic_is_integrated()) - v |= APIC_LVT_LEVEL_TRIGGER; - - apic_write(APIC_LVT0, v); -} - #ifdef CONFIG_X86_32 /** * get_physical_broadcast - Get number of physical broadcast IDs @@ -518,6 +480,23 @@ static void lapic_timer_broadcast(const struct cpumask *mask) #endif } + +/* + * The local apic timer can be used for any function which is CPU local. + */ +static struct clock_event_device lapic_clockevent = { + .name = "lapic", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT + | CLOCK_EVT_FEAT_C3STOP | CLOCK_EVT_FEAT_DUMMY, + .shift = 32, + .set_mode = lapic_timer_setup, + .set_next_event = lapic_next_event, + .broadcast = lapic_timer_broadcast, + .rating = 100, + .irq = -1, +}; +static DEFINE_PER_CPU(struct clock_event_device, lapic_events); + /* * Setup the local APIC timer for this CPU. Copy the initialized values * of the boot CPU and register the clock event in the framework. @@ -1560,7 +1539,7 @@ static int __init detect_init_APIC(void) } #else -static int apic_verify(void) +static int __init apic_verify(void) { u32 features, h, l; @@ -1585,7 +1564,7 @@ static int apic_verify(void) return 0; } -int apic_force_enable(void) +int __init apic_force_enable(unsigned long addr) { u32 h, l; @@ -1601,7 +1580,7 @@ int apic_force_enable(void) if (!(l & MSR_IA32_APICBASE_ENABLE)) { pr_info("Local APIC disabled by BIOS -- reenabling.\n"); l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE; + l |= MSR_IA32_APICBASE_ENABLE | addr; wrmsr(MSR_IA32_APICBASE, l, h); enabled_via_apicbase = 1; } @@ -1642,7 +1621,7 @@ static int __init detect_init_APIC(void) "you can enable it with \"lapic\"\n"); return -1; } - if (apic_force_enable()) + if (apic_force_enable(APIC_DEFAULT_PHYS_BASE)) return -1; } else { if (apic_verify()) diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c new file mode 100644 index 0000000..7a8cebc --- /dev/null +++ b/arch/x86/kernel/devicetree.c @@ -0,0 +1,441 @@ +/* + * Architecture specific OF callbacks. + */ +#include <linux/bootmem.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/of_irq.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/of_pci.h> + +#include <asm/hpet.h> +#include <asm/irq_controller.h> +#include <asm/apic.h> +#include <asm/pci_x86.h> + +__initdata u64 initial_dtb; +char __initdata cmd_line[COMMAND_LINE_SIZE]; +static LIST_HEAD(irq_domains); +static DEFINE_RAW_SPINLOCK(big_irq_lock); + +int __initdata of_ioapic; + +#ifdef CONFIG_X86_IO_APIC +static void add_interrupt_host(struct irq_domain *ih) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&big_irq_lock, flags); + list_add(&ih->l, &irq_domains); + raw_spin_unlock_irqrestore(&big_irq_lock, flags); +} +#endif + +static struct irq_domain *get_ih_from_node(struct device_node *controller) +{ + struct irq_domain *ih, *found = NULL; + unsigned long flags; + + raw_spin_lock_irqsave(&big_irq_lock, flags); + list_for_each_entry(ih, &irq_domains, l) { + if (ih->controller == controller) { + found = ih; + break; + } + } + raw_spin_unlock_irqrestore(&big_irq_lock, flags); + return found; +} + +unsigned int irq_create_of_mapping(struct device_node *controller, + const u32 *intspec, unsigned int intsize) +{ + struct irq_domain *ih; + u32 virq, type; + int ret; + + ih = get_ih_from_node(controller); + if (!ih) + return 0; + ret = ih->xlate(ih, intspec, intsize, &virq, &type); + if (ret) + return ret; + if (type == IRQ_TYPE_NONE) + return virq; + /* set the mask if it is different from current */ + if (type == (irq_to_desc(virq)->status & IRQF_TRIGGER_MASK)) + set_irq_type(virq, type); + return virq; +} +EXPORT_SYMBOL_GPL(irq_create_of_mapping); + +unsigned long pci_address_to_pio(phys_addr_t address) +{ + /* + * The ioport address can be directly used by inX / outX + */ + BUG_ON(address >= (1 << 16)); + return (unsigned long)address; +} +EXPORT_SYMBOL_GPL(pci_address_to_pio); + +void __init early_init_dt_scan_chosen_arch(unsigned long node) +{ + BUG(); +} + +void __init early_init_dt_add_memory_arch(u64 base, u64 size) +{ + BUG(); +} + +void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) +{ + return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS)); +} + +void __init add_dtb(u64 data) +{ + initial_dtb = data + offsetof(struct setup_data, data); +} + +/* + * CE4100 ids. Will be moved to machine_device_initcall() once we have it. + */ +static struct of_device_id __initdata ce4100_ids[] = { + { .compatible = "intel,ce4100-cp", }, + { .compatible = "isa", }, + { .compatible = "pci", }, + {}, +}; + +static int __init add_bus_probe(void) +{ + if (!of_have_populated_dt()) + return 0; + + return of_platform_bus_probe(NULL, ce4100_ids, NULL); +} +module_init(add_bus_probe); + +#ifdef CONFIG_PCI +static int x86_of_pci_irq_enable(struct pci_dev *dev) +{ + struct of_irq oirq; + u32 virq; + int ret; + u8 pin; + + ret = pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + if (ret) + return ret; + if (!pin) + return 0; + + ret = of_irq_map_pci(dev, &oirq); + if (ret) + return ret; + + virq = irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); + if (virq == 0) + return -EINVAL; + dev->irq = virq; + return 0; +} + +static void x86_of_pci_irq_disable(struct pci_dev *dev) +{ +} + +void __cpuinit x86_of_pci_init(void) +{ + struct device_node *np; + + pcibios_enable_irq = x86_of_pci_irq_enable; + pcibios_disable_irq = x86_of_pci_irq_disable; + + for_each_node_by_type(np, "pci") { + const void *prop; + struct pci_bus *bus; + unsigned int bus_min; + struct device_node *child; + + prop = of_get_property(np, "bus-range", NULL); + if (!prop) + continue; + bus_min = be32_to_cpup(prop); + + bus = pci_find_bus(0, bus_min); + if (!bus) { + printk(KERN_ERR "Can't find a node for bus %s.\n", + np->full_name); + continue; + } + + if (bus->self) + bus->self->dev.of_node = np; + else + bus->dev.of_node = np; + + for_each_child_of_node(np, child) { + struct pci_dev *dev; + u32 devfn; + + prop = of_get_property(child, "reg", NULL); + if (!prop) + continue; + + devfn = (be32_to_cpup(prop) >> 8) & 0xff; + dev = pci_get_slot(bus, devfn); + if (!dev) + continue; + dev->dev.of_node = child; + pci_dev_put(dev); + } + } +} +#endif + +static void __init dtb_setup_hpet(void) +{ +#ifdef CONFIG_HPET_TIMER + struct device_node *dn; + struct resource r; + int ret; + + dn = of_find_compatible_node(NULL, NULL, "intel,ce4100-hpet"); + if (!dn) + return; + ret = of_address_to_resource(dn, 0, &r); + if (ret) { + WARN_ON(1); + return; + } + hpet_address = r.start; +#endif +} + +static void __init dtb_lapic_setup(void) +{ +#ifdef CONFIG_X86_LOCAL_APIC + struct device_node *dn; + struct resource r; + int ret; + + dn = of_find_compatible_node(NULL, NULL, "intel,ce4100-lapic"); + if (!dn) + return; + + ret = of_address_to_resource(dn, 0, &r); + if (WARN_ON(ret)) + return; + + /* Did the boot loader setup the local APIC ? */ + if (!cpu_has_apic) { + if (apic_force_enable(r.start)) + return; + } + smp_found_config = 1; + pic_mode = 1; + register_lapic_address(r.start); + generic_processor_info(boot_cpu_physical_apicid, + GET_APIC_VERSION(apic_read(APIC_LVR))); +#endif +} + +#ifdef CONFIG_X86_IO_APIC +static unsigned int ioapic_id; + +static void __init dtb_add_ioapic(struct device_node *dn) +{ + struct resource r; + int ret; + + ret = of_address_to_resource(dn, 0, &r); + if (ret) { + printk(KERN_ERR "Can't obtain address from node %s.\n", + dn->full_name); + return; + } + mp_register_ioapic(++ioapic_id, r.start, gsi_top); +} + +static void __init dtb_ioapic_setup(void) +{ + struct device_node *dn; + + for_each_compatible_node(dn, NULL, "intel,ce4100-ioapic") + dtb_add_ioapic(dn); + + if (nr_ioapics) { + of_ioapic = 1; + return; + } + printk(KERN_ERR "Error: No information about IO-APIC in OF.\n"); +} +#else +static void __init dtb_ioapic_setup(void) {} +#endif + +static void __init dtb_apic_setup(void) +{ + dtb_lapic_setup(); + dtb_ioapic_setup(); +} + +#ifdef CONFIG_OF_FLATTREE +static void __init x86_flattree_get_config(void) +{ + u32 size, map_len; + void *new_dtb; + + if (!initial_dtb) + return; + + map_len = max(PAGE_SIZE - (initial_dtb & ~PAGE_MASK), + (u64)sizeof(struct boot_param_header)); + + initial_boot_params = early_memremap(initial_dtb, map_len); + size = be32_to_cpu(initial_boot_params->totalsize); + if (map_len < size) { + early_iounmap(initial_boot_params, map_len); + initial_boot_params = early_memremap(initial_dtb, size); + map_len = size; + } + + new_dtb = alloc_bootmem(size); + memcpy(new_dtb, initial_boot_params, size); + early_iounmap(initial_boot_params, map_len); + + initial_boot_params = new_dtb; + + /* root level address cells */ + of_scan_flat_dt(early_init_dt_scan_root, NULL); + + unflatten_device_tree(); +} +#else +static inline void x86_flattree_get_config(void) { } +#endif + +void __init x86_dtb_init(void) +{ + x86_flattree_get_config(); + + if (!of_have_populated_dt()) + return; + + dtb_setup_hpet(); + dtb_apic_setup(); +} + +#ifdef CONFIG_X86_IO_APIC + +struct of_ioapic_type { + u32 out_type; + u32 trigger; + u32 polarity; +}; + +static struct of_ioapic_type of_ioapic_type[] = +{ + { + .out_type = IRQ_TYPE_EDGE_RISING, + .trigger = IOAPIC_EDGE, + .polarity = 1, + }, + { + .out_type = IRQ_TYPE_LEVEL_LOW, + .trigger = IOAPIC_LEVEL, + .polarity = 0, + }, + { + .out_type = IRQ_TYPE_LEVEL_HIGH, + .trigger = IOAPIC_LEVEL, + .polarity = 1, + }, + { + .out_type = IRQ_TYPE_EDGE_FALLING, + .trigger = IOAPIC_EDGE, + .polarity = 0, + }, +}; + +static int ioapic_xlate(struct irq_domain *id, const u32 *intspec, u32 intsize, + u32 *out_hwirq, u32 *out_type) +{ + struct io_apic_irq_attr attr; + struct of_ioapic_type *it; + u32 line, idx, type; + + if (intsize < 2) + return -EINVAL; + + line = *intspec; + idx = (u32) id->priv; + *out_hwirq = line + mp_gsi_routing[idx].gsi_base; + + intspec++; + type = *intspec; + + if (type >= ARRAY_SIZE(of_ioapic_type)) + return -EINVAL; + + it = of_ioapic_type + type; + *out_type = it->out_type; + + set_io_apic_irq_attr(&attr, idx, line, it->trigger, it->polarity); + + return io_apic_setup_irq_pin(*out_hwirq, cpu_to_node(0), &attr); +} + +static void __init ioapic_add_ofnode(struct device_node *np) +{ + struct resource r; + int i, ret; + + ret = of_address_to_resource(np, 0, &r); + if (ret) { + printk(KERN_ERR "Failed to obtain address for %s\n", + np->full_name); + return; + } + + for (i = 0; i < nr_ioapics; i++) { + if (r.start == mp_ioapics[i].apicaddr) { + struct irq_domain *id; + + id = kzalloc(sizeof(*id), GFP_KERNEL); + BUG_ON(!id); + id->controller = np; + id->xlate = ioapic_xlate; + id->priv = (void *)i; + add_interrupt_host(id); + return; + } + } + printk(KERN_ERR "IOxAPIC at %s is not registered.\n", np->full_name); +} + +void __init x86_add_irq_domains(void) +{ + struct device_node *dp; + + if (!of_have_populated_dt()) + return; + + for_each_node_with_property(dp, "interrupt-controller") { + if (of_device_is_compatible(dp, "intel,ce4100-ioapic")) + ioapic_add_ofnode(dp); + } +} +#else +void __init x86_add_irq_domains(void) { } +#endif diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 0b5e2b5..cdf5bfd 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -667,21 +667,15 @@ __init void e820_setup_gap(void) * boot_params.e820_map, others are passed via SETUP_E820_EXT node of * linked list of struct setup_data, which is parsed here. */ -void __init parse_e820_ext(struct setup_data *sdata, unsigned long pa_data) +void __init parse_e820_ext(struct setup_data *sdata) { - u32 map_len; int entries; struct e820entry *extmap; entries = sdata->len / sizeof(struct e820entry); - map_len = sdata->len + sizeof(struct setup_data); - if (map_len > PAGE_SIZE) - sdata = early_ioremap(pa_data, map_len); extmap = (struct e820entry *)(sdata->data); __append_e820_map(extmap, entries); sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); - if (map_len > PAGE_SIZE) - early_iounmap(sdata, map_len); printk(KERN_INFO "extended physical RAM map:\n"); e820_print_map("extended"); } diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 187aa63..ce0be7c 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -137,7 +137,7 @@ ENTRY(startup_32) movsl 1: -#ifdef CONFIG_OLPC_OPENFIRMWARE +#ifdef CONFIG_OLPC /* save OFW's pgdir table for later use when calling into OFW */ movl %cr3, %eax movl %eax, pa(olpc_ofw_pgd) diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 5ee693f..948a31e 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -223,15 +223,6 @@ void smp_x86_platform_ipi(struct pt_regs *regs) EXPORT_SYMBOL_GPL(vector_used_by_percpu_irq); -#ifdef CONFIG_OF -unsigned int irq_create_of_mapping(struct device_node *controller, - const u32 *intspec, unsigned int intsize) -{ - return intspec[0]; -} -EXPORT_SYMBOL_GPL(irq_create_of_mapping); -#endif - #ifdef CONFIG_HOTPLUG_CPU /* A cpu has been removed from cpu_online_mask. Reset irq affinities. */ void fixup_irqs(void) diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index d30854b..f470e4e 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -25,6 +25,7 @@ #include <asm/setup.h> #include <asm/i8259.h> #include <asm/traps.h> +#include <asm/prom.h> /* * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: @@ -120,6 +121,12 @@ void __init init_IRQ(void) int i; /* + * We probably need a better place for this, but it works for + * now ... + */ + x86_add_irq_domains(); + + /* * On cpu 0, Assign IRQ0_VECTOR..IRQ15_VECTOR's to IRQ 0..15. * If these IRQ's are handled by legacy interrupt-controllers like PIC, * then this configuration will likely be static after the boot. If @@ -308,7 +315,7 @@ void __init native_init_IRQ(void) set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); } - if (!acpi_ioapic) + if (!acpi_ioapic && !of_ioapic) setup_irq(2, &irq2); #ifdef CONFIG_X86_32 diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c index 6f39cab..3f2ad26 100644 --- a/arch/x86/kernel/rtc.c +++ b/arch/x86/kernel/rtc.c @@ -6,6 +6,7 @@ #include <linux/acpi.h> #include <linux/bcd.h> #include <linux/pnp.h> +#include <linux/of.h> #include <asm/vsyscall.h> #include <asm/x86_init.h> @@ -236,6 +237,8 @@ static __init int add_rtc_cmos(void) } } #endif + if (of_have_populated_dt()) + return 0; platform_device_register(&rtc_device); dev_info(&rtc_device.dev, diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index c3a606c..b176f2b 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -113,6 +113,7 @@ #endif #include <asm/mce.h> #include <asm/alternative.h> +#include <asm/prom.h> /* * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries. @@ -453,16 +454,30 @@ static void __init parse_setup_data(void) return; pa_data = boot_params.hdr.setup_data; while (pa_data) { - data = early_memremap(pa_data, PAGE_SIZE); + u32 data_len, map_len; + + map_len = max(PAGE_SIZE - (pa_data & ~PAGE_MASK), + (u64)sizeof(struct setup_data)); + data = early_memremap(pa_data, map_len); + data_len = data->len + sizeof(struct setup_data); + if (data_len > map_len) { + early_iounmap(data, map_len); + data = early_memremap(pa_data, data_len); + map_len = data_len; + } + switch (data->type) { case SETUP_E820_EXT: - parse_e820_ext(data, pa_data); + parse_e820_ext(data); + break; + case SETUP_DTB: + add_dtb(pa_data); break; default: break; } pa_data = data->next; - early_iounmap(data, PAGE_SIZE); + early_iounmap(data, map_len); } } @@ -1030,8 +1045,8 @@ void __init setup_arch(char **cmdline_p) * Read APIC and some other early information from ACPI tables. */ acpi_boot_init(); - sfi_init(); + x86_dtb_init(); /* * get boot-time SMP configuration: @@ -1065,6 +1080,8 @@ void __init setup_arch(char **cmdline_p) #endif x86_init.oem.banner(); + x86_init.timers.wallclock_init(); + mcheck_init(); local_irq_save(flags); diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index ceb2911..c11514e 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -70,6 +70,7 @@ struct x86_init_ops x86_init __initdata = { .setup_percpu_clockev = setup_boot_APIC_clock, .tsc_pre_init = x86_init_noop, .timer_init = hpet_time_init, + .wallclock_init = x86_init_noop, }, .iommu = { diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c index 9260b3e..67858be 100644 --- a/arch/x86/pci/ce4100.c +++ b/arch/x86/pci/ce4100.c @@ -255,7 +255,7 @@ int bridge_read(unsigned int devfn, int reg, int len, u32 *value) static int ce4100_conf_read(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 *value) { - int i, retval = 1; + int i; if (bus == 1) { for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) { diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c index cd6f184..28071bb 100644 --- a/arch/x86/platform/ce4100/ce4100.c +++ b/arch/x86/platform/ce4100/ce4100.c @@ -16,21 +16,19 @@ #include <linux/serial_8250.h> #include <asm/ce4100.h> +#include <asm/prom.h> #include <asm/setup.h> +#include <asm/i8259.h> #include <asm/io.h> +#include <asm/io_apic.h> static int ce4100_i8042_detect(void) { return 0; } -static void __init sdv_find_smp_config(void) -{ -} - #ifdef CONFIG_SERIAL_8250 - static unsigned int mem_serial_in(struct uart_port *p, int offset) { offset = offset << p->regshift; @@ -119,6 +117,15 @@ static void __init sdv_arch_setup(void) sdv_serial_fixup(); } +#ifdef CONFIG_X86_IO_APIC +static void __cpuinit sdv_pci_init(void) +{ + x86_of_pci_init(); + /* We can't set this earlier, because we need to calibrate the timer */ + legacy_pic = &null_legacy_pic; +} +#endif + /* * CE4100 specific x86_init function overrides and early setup * calls. @@ -129,6 +136,11 @@ void __init x86_ce4100_early_setup(void) x86_platform.i8042_detect = ce4100_i8042_detect; x86_init.resources.probe_roms = x86_init_noop; x86_init.mpparse.get_smp_config = x86_init_uint_noop; - x86_init.mpparse.find_smp_config = sdv_find_smp_config; + x86_init.mpparse.find_smp_config = x86_init_noop; x86_init.pci.init = ce4100_pci_init; + +#ifdef CONFIG_X86_IO_APIC + x86_init.pci.init_irq = sdv_pci_init; + x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck; +#endif } diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts new file mode 100644 index 0000000..dc701ea --- /dev/null +++ b/arch/x86/platform/ce4100/falconfalls.dts @@ -0,0 +1,428 @@ +/* + * CE4100 on Falcon Falls + * + * (c) Copyright 2010 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License. + */ +/dts-v1/; +/ { + model = "intel,falconfalls"; + compatible = "intel,falconfalls"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "intel,ce4100"; + reg = <0>; + lapic = <&lapic0>; + }; + }; + + soc@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,ce4100-cp"; + ranges; + + ioapic1: interrupt-controller@fec00000 { + #interrupt-cells = <2>; + compatible = "intel,ce4100-ioapic"; + interrupt-controller; + reg = <0xfec00000 0x1000>; + }; + + timer@fed00000 { + compatible = "intel,ce4100-hpet"; + reg = <0xfed00000 0x200>; + }; + + lapic0: interrupt-controller@fee00000 { + compatible = "intel,ce4100-lapic"; + reg = <0xfee00000 0x1000>; + }; + + pci@3fc { + #address-cells = <3>; + #size-cells = <2>; + compatible = "intel,ce4100-pci", "pci"; + device_type = "pci"; + bus-range = <0 0>; + ranges = <0x2000000 0 0xbffff000 0xbffff000 0 0x1000 + 0x2000000 0 0xdffe0000 0xdffe0000 0 0x1000 + 0x0000000 0 0x0 0x0 0 0x100>; + + /* Secondary IO-APIC */ + ioapic2: interrupt-controller@0,1 { + #interrupt-cells = <2>; + compatible = "intel,ce4100-ioapic"; + interrupt-controller; + reg = <0x100 0x0 0x0 0x0 0x0>; + assigned-addresses = <0x02000000 0x0 0xbffff000 0x0 0x1000>; + }; + + pci@1,0 { + #address-cells = <3>; + #size-cells = <2>; + compatible = "intel,ce4100-pci", "pci"; + device_type = "pci"; + bus-range = <1 1>; + ranges = <0x2000000 0 0xdffe0000 0x2000000 0 0xdffe0000 0 0x1000>; + + interrupt-parent = <&ioapic2>; + + display@2,0 { + compatible = "pci8086,2e5b.2", + "pci8086,2e5b", + "pciclass038000", + "pciclass0380"; + + reg = <0x11000 0x0 0x0 0x0 0x0>; + interrupts = <0 1>; + }; + + multimedia@3,0 { + compatible = "pci8086,2e5c.2", + "pci8086,2e5c", + "pciclass048000", + "pciclass0480"; + + reg = <0x11800 0x0 0x0 0x0 0x0>; + interrupts = <2 1>; + }; + + multimedia@4,0 { + compatible = "pci8086,2e5d.2", + "pci8086,2e5d", + "pciclass048000", + "pciclass0480"; + + reg = <0x12000 0x0 0x0 0x0 0x0>; + interrupts = <4 1>; + }; + + multimedia@4,1 { + compatible = "pci8086,2e5e.2", + "pci8086,2e5e", + "pciclass048000", + "pciclass0480"; + + reg = <0x12100 0x0 0x0 0x0 0x0>; + interrupts = <5 1>; + }; + + sound@6,0 { + compatible = "pci8086,2e5f.2", + "pci8086,2e5f", + "pciclass040100", + "pciclass0401"; + + reg = <0x13000 0x0 0x0 0x0 0x0>; + interrupts = <6 1>; + }; + + sound@6,1 { + compatible = "pci8086,2e5f.2", + "pci8086,2e5f", + "pciclass040100", + "pciclass0401"; + + reg = <0x13100 0x0 0x0 0x0 0x0>; + interrupts = <7 1>; + }; + + sound@6,2 { + compatible = "pci8086,2e60.2", + "pci8086,2e60", + "pciclass040100", + "pciclass0401"; + + reg = <0x13200 0x0 0x0 0x0 0x0>; + interrupts = <8 1>; + }; + + display@8,0 { + compatible = "pci8086,2e61.2", + "pci8086,2e61", + "pciclass038000", + "pciclass0380"; + + reg = <0x14000 0x0 0x0 0x0 0x0>; + interrupts = <9 1>; + }; + + display@8,1 { + compatible = "pci8086,2e62.2", + "pci8086,2e62", + "pciclass038000", + "pciclass0380"; + + reg = <0x14100 0x0 0x0 0x0 0x0>; + interrupts = <10 1>; + }; + + multimedia@8,2 { + compatible = "pci8086,2e63.2", + "pci8086,2e63", + "pciclass048000", + "pciclass0480"; + + reg = <0x14200 0x0 0x0 0x0 0x0>; + interrupts = <11 1>; + }; + + entertainment-encryption@9,0 { + compatible = "pci8086,2e64.2", + "pci8086,2e64", + "pciclass101000", + "pciclass1010"; + + reg = <0x14800 0x0 0x0 0x0 0x0>; + interrupts = <12 1>; + }; + + localbus@a,0 { + compatible = "pci8086,2e65.2", + "pci8086,2e65", + "pciclassff0000", + "pciclassff00"; + + reg = <0x15000 0x0 0x0 0x0 0x0>; + }; + + serial@b,0 { + compatible = "pci8086,2e66.2", + "pci8086,2e66", + "pciclass070003", + "pciclass0700"; + + reg = <0x15800 0x0 0x0 0x0 0x0>; + interrupts = <14 1>; + }; + + gpio@b,1 { + compatible = "pci8086,2e67.2", + "pci8086,2e67", + "pciclassff0000", + "pciclassff00"; + + #gpio-cells = <2>; + reg = <0x15900 0x0 0x0 0x0 0x0>; + interrupts = <15 1>; + gpio-controller; + }; + + i2c-controller@b,2 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "pci8086,2e68.2", + "pci8086,2e68", + "pciclass,ff0000", + "pciclass,ff00"; + + reg = <0x15a00 0x0 0x0 0x0 0x0>; + interrupts = <16 1>; + ranges = <0 0 0x02000000 0 0xdffe0500 0x100 + 1 0 0x02000000 0 0xdffe0600 0x100 + 2 0 0x02000000 0 0xdffe0700 0x100>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <0 0 0x100>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <1 0 0x100>; + + gpio@26 { + #gpio-cells = <2>; + compatible = "ti,pcf8575"; + reg = <0x26>; + gpio-controller; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "intel,ce4100-i2c-controller"; + reg = <2 0 0x100>; + + gpio@26 { + #gpio-cells = <2>; + compatible = "ti,pcf8575"; + reg = <0x26>; + gpio-controller; + }; + }; + }; + + smard-card@b,3 { + compatible = "pci8086,2e69.2", + "pci8086,2e69", + "pciclass070500", + "pciclass0705"; + + reg = <0x15b00 0x0 0x0 0x0 0x0>; + interrupts = <15 1>; + }; + + spi-controller@b,4 { + #address-cells = <1>; + #size-cells = <0>; + compatible = + "pci8086,2e6a.2", + "pci8086,2e6a", + "pciclass,ff0000", + "pciclass,ff00"; + + reg = <0x15c00 0x0 0x0 0x0 0x0>; + interrupts = <15 1>; + + dac@0 { + compatible = "ti,pcm1755"; + reg = <0>; + spi-max-frequency = <115200>; + }; + + dac@1 { + compatible = "ti,pcm1609a"; + reg = <1>; + spi-max-frequency = <115200>; + }; + + eeprom@2 { + compatible = "atmel,at93c46"; + reg = <2>; + spi-max-frequency = <115200>; + }; + }; + + multimedia@b,7 { + compatible = "pci8086,2e6d.2", + "pci8086,2e6d", + "pciclassff0000", + "pciclassff00"; + + reg = <0x15f00 0x0 0x0 0x0 0x0>; + }; + + ethernet@c,0 { + compatible = "pci8086,2e6e.2", + "pci8086,2e6e", + "pciclass020000", + "pciclass0200"; + + reg = <0x16000 0x0 0x0 0x0 0x0>; + interrupts = <21 1>; + }; + + clock@c,1 { + compatible = "pci8086,2e6f.2", + "pci8086,2e6f", + "pciclassff0000", + "pciclassff00"; + + reg = <0x16100 0x0 0x0 0x0 0x0>; + interrupts = <3 1>; + }; + + usb@d,0 { + compatible = "pci8086,2e70.2", + "pci8086,2e70", + "pciclass0c0320", + "pciclass0c03"; + + reg = <0x16800 0x0 0x0 0x0 0x0>; + interrupts = <22 3>; + }; + + usb@d,1 { + compatible = "pci8086,2e70.2", + "pci8086,2e70", + "pciclass0c0320", + "pciclass0c03"; + + reg = <0x16900 0x0 0x0 0x0 0x0>; + interrupts = <22 3>; + }; + + sata@e,0 { + compatible = "pci8086,2e71.0", + "pci8086,2e71", + "pciclass010601", + "pciclass0106"; + + reg = <0x17000 0x0 0x0 0x0 0x0>; + interrupts = <23 3>; + }; + + flash@f,0 { + compatible = "pci8086,701.1", + "pci8086,701", + "pciclass050100", + "pciclass0501"; + + reg = <0x17800 0x0 0x0 0x0 0x0>; + interrupts = <13 1>; + }; + + entertainment-encryption@10,0 { + compatible = "pci8086,702.1", + "pci8086,702", + "pciclass101000", + "pciclass1010"; + + reg = <0x18000 0x0 0x0 0x0 0x0>; + }; + + co-processor@11,0 { + compatible = "pci8086,703.1", + "pci8086,703", + "pciclass0b4000", + "pciclass0b40"; + + reg = <0x18800 0x0 0x0 0x0 0x0>; + interrupts = <1 1>; + }; + + multimedia@12,0 { + compatible = "pci8086,704.0", + "pci8086,704", + "pciclass048000", + "pciclass0480"; + + reg = <0x19000 0x0 0x0 0x0 0x0>; + }; + }; + + isa@1f,0 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "isa"; + ranges = <1 0 0 0 0 0x100>; + + rtc@70 { + compatible = "intel,ce4100-rtc", "motorola,mc146818"; + interrupts = <8 3>; + interrupt-parent = <&ioapic1>; + ctrl-reg = <2>; + freq-reg = <0x26>; + reg = <1 0x70 2>; + }; + }; + }; + }; +}; diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index ea6529e..5c0207b 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -31,6 +31,7 @@ #include <asm/apic.h> #include <asm/io_apic.h> #include <asm/mrst.h> +#include <asm/mrst-vrtc.h> #include <asm/io.h> #include <asm/i8259.h> #include <asm/intel_scu_ipc.h> @@ -268,6 +269,7 @@ void __init x86_mrst_early_setup(void) x86_platform.calibrate_tsc = mrst_calibrate_tsc; x86_platform.i8042_detect = mrst_i8042_detect; + x86_init.timers.wallclock_init = mrst_rtc_init; x86_init.pci.init = pci_mrst_init; x86_init.pci.fixup_irqs = x86_init_noop; diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c index 32cd7ed..04cf645 100644 --- a/arch/x86/platform/mrst/vrtc.c +++ b/arch/x86/platform/mrst/vrtc.c @@ -100,22 +100,14 @@ int vrtc_set_mmss(unsigned long nowtime) void __init mrst_rtc_init(void) { - unsigned long rtc_paddr; - void __iomem *virt_base; + unsigned long vrtc_paddr = sfi_mrtc_array[0].phys_addr; sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc); - if (!sfi_mrtc_num) + if (!sfi_mrtc_num || !vrtc_paddr) return; - rtc_paddr = sfi_mrtc_array[0].phys_addr; - - /* vRTC's register address may not be page aligned */ - set_fixmap_nocache(FIX_LNW_VRTC, rtc_paddr); - - virt_base = (void __iomem *)__fix_to_virt(FIX_LNW_VRTC); - virt_base += rtc_paddr & ~PAGE_MASK; - vrtc_virt_base = virt_base; - + vrtc_virt_base = (void __iomem *)set_fixmap_offset_nocache(FIX_LNW_VRTC, + vrtc_paddr); x86_platform.get_wallclock = vrtc_get_time; x86_platform.set_wallclock = vrtc_set_mmss; } diff --git a/arch/x86/platform/olpc/Makefile b/arch/x86/platform/olpc/Makefile index e797428..c2a8cab 100644 --- a/arch/x86/platform/olpc/Makefile +++ b/arch/x86/platform/olpc/Makefile @@ -1,4 +1,4 @@ obj-$(CONFIG_OLPC) += olpc.o obj-$(CONFIG_OLPC_XO1) += olpc-xo1.o -obj-$(CONFIG_OLPC_OPENFIRMWARE) += olpc_ofw.o -obj-$(CONFIG_OLPC_OPENFIRMWARE_DT) += olpc_dt.o +obj-$(CONFIG_OLPC) += olpc_ofw.o +obj-$(CONFIG_OF_PROMTREE) += olpc_dt.o diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 61653f0..1b46a9d 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -330,9 +330,7 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev) i2c->adap = ocores_adapter; i2c_set_adapdata(&i2c->adap, i2c); i2c->adap.dev.parent = &pdev->dev; -#ifdef CONFIG_OF i2c->adap.dev.of_node = pdev->dev.of_node; -#endif /* add i2c adapter to i2c tree */ ret = i2c_add_adapter(&i2c->adap); @@ -390,15 +388,11 @@ static int ocores_i2c_resume(struct platform_device *pdev) #define ocores_i2c_resume NULL #endif -#ifdef CONFIG_OF static struct of_device_id ocores_i2c_match[] = { - { - .compatible = "opencores,i2c-ocores", - }, - {}, + { .compatible = "opencores,i2c-ocores", }, + {}, }; MODULE_DEVICE_TABLE(of, ocores_i2c_match); -#endif /* work with hotplug and coldplug */ MODULE_ALIAS("platform:ocores-i2c"); @@ -411,9 +405,7 @@ static struct platform_driver ocores_i2c_driver = { .driver = { .owner = THIS_MODULE, .name = "ocores-i2c", -#ifdef CONFIG_OF - .of_match_table = ocores_i2c_match, -#endif + .of_match_table = ocores_i2c_match, }, }; diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index f0bd5bc..045ba6e 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -537,9 +537,7 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) client->dev.parent = &client->adapter->dev; client->dev.bus = &i2c_bus_type; client->dev.type = &i2c_client_type; -#ifdef CONFIG_OF client->dev.of_node = info->of_node; -#endif dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap), client->addr); diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index fd877f6..2f7fc0c 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1516,21 +1516,17 @@ static int __devexit mmc_spi_remove(struct spi_device *spi) return 0; } -#if defined(CONFIG_OF) static struct of_device_id mmc_spi_of_match_table[] __devinitdata = { { .compatible = "mmc-spi-slot", }, {}, }; -#endif static struct spi_driver mmc_spi_driver = { .driver = { .name = "mmc_spi", .bus = &spi_bus_type, .owner = THIS_MODULE, -#if defined(CONFIG_OF) .of_match_table = mmc_spi_of_match_table, -#endif }, .probe = mmc_spi_probe, .remove = __devexit_p(mmc_spi_remove), diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c index b79d7e1..db0290f 100644 --- a/drivers/net/ethoc.c +++ b/drivers/net/ethoc.c @@ -1163,15 +1163,11 @@ static int ethoc_resume(struct platform_device *pdev) # define ethoc_resume NULL #endif -#ifdef CONFIG_OF static struct of_device_id ethoc_match[] = { - { - .compatible = "opencores,ethoc", - }, + { .compatible = "opencores,ethoc", }, {}, }; MODULE_DEVICE_TABLE(of, ethoc_match); -#endif static struct platform_driver ethoc_driver = { .probe = ethoc_probe, @@ -1181,9 +1177,7 @@ static struct platform_driver ethoc_driver = { .driver = { .name = "ethoc", .owner = THIS_MODULE, -#ifdef CONFIG_OF .of_match_table = ethoc_match, -#endif }, }; diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index 3c6e100..d06a637 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -69,4 +69,10 @@ config OF_MDIO help OpenFirmware MDIO bus (Ethernet PHY) accessors +config OF_PCI + def_tristate PCI + depends on PCI && (PPC || MICROBLAZE || X86) + help + OpenFirmware PCI bus accessors + endmenu # OF diff --git a/drivers/of/Makefile b/drivers/of/Makefile index 3ab21a0..f7861ed 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_OF_I2C) += of_i2c.o obj-$(CONFIG_OF_NET) += of_net.o obj-$(CONFIG_OF_SPI) += of_spi.o obj-$(CONFIG_OF_MDIO) += of_mdio.o +obj-$(CONFIG_OF_PCI) += of_pci.o diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c new file mode 100644 index 0000000..ac1ec54 --- /dev/null +++ b/drivers/of/of_pci.c @@ -0,0 +1,92 @@ +#include <linux/kernel.h> +#include <linux/of_pci.h> +#include <linux/of_irq.h> +#include <asm/prom.h> + +/** + * of_irq_map_pci - Resolve the interrupt for a PCI device + * @pdev: the device whose interrupt is to be resolved + * @out_irq: structure of_irq filled by this function + * + * This function resolves the PCI interrupt for a given PCI device. If a + * device-node exists for a given pci_dev, it will use normal OF tree + * walking. If not, it will implement standard swizzling and walk up the + * PCI tree until an device-node is found, at which point it will finish + * resolving using the OF tree walking. + */ +int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) +{ + struct device_node *dn, *ppnode; + struct pci_dev *ppdev; + u32 lspec; + __be32 lspec_be; + __be32 laddr[3]; + u8 pin; + int rc; + + /* Check if we have a device node, if yes, fallback to standard + * device tree parsing + */ + dn = pci_device_to_OF_node(pdev); + if (dn) { + rc = of_irq_map_one(dn, 0, out_irq); + if (!rc) + return rc; + } + + /* Ok, we don't, time to have fun. Let's start by building up an + * interrupt spec. we assume #interrupt-cells is 1, which is standard + * for PCI. If you do different, then don't use that routine. + */ + rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); + if (rc != 0) + return rc; + /* No pin, exit */ + if (pin == 0) + return -ENODEV; + + /* Now we walk up the PCI tree */ + lspec = pin; + for (;;) { + /* Get the pci_dev of our parent */ + ppdev = pdev->bus->self; + + /* Ouch, it's a host bridge... */ + if (ppdev == NULL) { + ppnode = pci_bus_to_OF_node(pdev->bus); + + /* No node for host bridge ? give up */ + if (ppnode == NULL) + return -EINVAL; + } else { + /* We found a P2P bridge, check if it has a node */ + ppnode = pci_device_to_OF_node(ppdev); + } + + /* Ok, we have found a parent with a device-node, hand over to + * the OF parsing code. + * We build a unit address from the linux device to be used for + * resolution. Note that we use the linux bus number which may + * not match your firmware bus numbering. + * Fortunately, in most cases, interrupt-map-mask doesn't + * include the bus number as part of the matching. + * You should still be careful about that though if you intend + * to rely on this function (you ship a firmware that doesn't + * create device nodes for all PCI devices). + */ + if (ppnode) + break; + + /* We can only get here if we hit a P2P bridge with no node, + * let's do standard swizzling and try again + */ + lspec = pci_swizzle_interrupt_pin(pdev, lspec); + pdev = ppdev; + } + + lspec_be = cpu_to_be32(lspec); + laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8)); + laddr[1] = laddr[2] = cpu_to_be32(0); + return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq); +} +EXPORT_SYMBOL_GPL(of_irq_map_pci); diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index dc2a0ba..911e75c 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -37,6 +37,8 @@ #include <linux/mod_devicetable.h> #include <linux/log2.h> #include <linux/pm.h> +#include <linux/of.h> +#include <linux/of_platform.h> /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */ #include <asm-generic/rtc.h> @@ -1057,6 +1059,47 @@ static struct pnp_driver cmos_pnp_driver = { #endif /* CONFIG_PNP */ +#ifdef CONFIG_OF +static const struct of_device_id of_cmos_match[] = { + { + .compatible = "motorola,mc146818", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_cmos_match); + +static __init void cmos_of_init(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct rtc_time time; + int ret; + const __be32 *val; + + if (!node) + return; + + val = of_get_property(node, "ctrl-reg", NULL); + if (val) + CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL); + + val = of_get_property(node, "freq-reg", NULL); + if (val) + CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT); + + get_rtc_time(&time); + ret = rtc_valid_tm(&time); + if (ret) { + struct rtc_time def_time = { + .tm_year = 1, + .tm_mday = 1, + }; + set_rtc_time(&def_time); + } +} +#else +static inline void cmos_of_init(struct platform_device *pdev) {} +#define of_cmos_match NULL +#endif /*----------------------------------------------------------------*/ /* Platform setup should have set up an RTC device, when PNP is @@ -1065,6 +1108,7 @@ static struct pnp_driver cmos_pnp_driver = { static int __init cmos_platform_probe(struct platform_device *pdev) { + cmos_of_init(pdev); cmos_wake_setup(&pdev->dev); return cmos_do_probe(&pdev->dev, platform_get_resource(pdev, IORESOURCE_IO, 0), @@ -1096,6 +1140,7 @@ static struct platform_driver cmos_platform_driver = { #ifdef CONFIG_PM .pm = &cmos_pm_ops, #endif + .of_match_table = of_cmos_match, } }; diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c index 4db96fa..b86bc32 100644 --- a/drivers/rtc/rtc-mrst.c +++ b/drivers/rtc/rtc-mrst.c @@ -62,6 +62,17 @@ static inline int is_intr(u8 rtc_intr) return rtc_intr & RTC_IRQMASK; } +static inline unsigned char vrtc_is_updating(void) +{ + unsigned char uip; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + uip = (vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP); + spin_unlock_irqrestore(&rtc_lock, flags); + return uip; +} + /* * rtc_time's year contains the increment over 1900, but vRTC's YEAR * register can't be programmed to value larger than 0x64, so vRTC @@ -76,7 +87,7 @@ static int mrst_read_time(struct device *dev, struct rtc_time *time) { unsigned long flags; - if (rtc_is_updating()) + if (vrtc_is_updating()) mdelay(20); spin_lock_irqsave(&rtc_lock, flags); diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 9592883..a429b01 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -1557,9 +1557,7 @@ static int __devinit pxa2xx_spi_probe(struct platform_device *pdev) drv_data->ssp = ssp; master->dev.parent = &pdev->dev; -#ifdef CONFIG_OF master->dev.of_node = pdev->dev.of_node; -#endif /* the spi->mode bits understood by this driver: */ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; diff --git a/drivers/spi/pxa2xx_spi_pci.c b/drivers/spi/pxa2xx_spi_pci.c index 19752b0..378e504 100644 --- a/drivers/spi/pxa2xx_spi_pci.c +++ b/drivers/spi/pxa2xx_spi_pci.c @@ -89,9 +89,7 @@ static int __devinit ce4100_spi_probe(struct pci_dev *dev, goto err_nomem; pdev->dev.parent = &dev->dev; -#ifdef CONFIG_OF pdev->dev.of_node = dev->dev.of_node; -#endif ssp = &spi_info->ssp; ssp->phys_base = pci_resource_start(dev, 0); ssp->mmio_base = ioremap(phys_beg, phys_len); diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index 7adaef6..4d2c75d 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -351,14 +351,12 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id) return IRQ_HANDLED; } -#ifdef CONFIG_OF static const struct of_device_id xilinx_spi_of_match[] = { { .compatible = "xlnx,xps-spi-2.00.a", }, { .compatible = "xlnx,xps-spi-2.00.b", }, {} }; MODULE_DEVICE_TABLE(of, xilinx_spi_of_match); -#endif struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem, u32 irq, s16 bus_num, int num_cs, int little_endian, int bits_per_word) @@ -394,9 +392,7 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem, master->bus_num = bus_num; master->num_chipselect = num_cs; -#ifdef CONFIG_OF master->dev.of_node = dev->of_node; -#endif xspi->mem = *mem; xspi->irq = irq; @@ -539,9 +535,7 @@ static struct platform_driver xilinx_spi_driver = { .driver = { .name = XILINX_SPI_NAME, .owner = THIS_MODULE, -#ifdef CONFIG_OF .of_match_table = xilinx_spi_of_match, -#endif }, }; diff --git a/include/linux/device.h b/include/linux/device.h index 1bf5cf0..ca5d252 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -128,9 +128,7 @@ struct device_driver { bool suppress_bind_attrs; /* disables bind/unbind via sysfs */ -#if defined(CONFIG_OF) const struct of_device_id *of_match_table; -#endif int (*probe) (struct device *dev); int (*remove) (struct device *dev); @@ -441,9 +439,8 @@ struct device { override */ /* arch specific additions */ struct dev_archdata archdata; -#ifdef CONFIG_OF - struct device_node *of_node; -#endif + + struct device_node *of_node; /* associated device tree node */ dev_t devt; /* dev_t, creates the sysfs "dev" */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 903576d..06a8d9c 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -258,9 +258,7 @@ struct i2c_board_info { unsigned short addr; void *platform_data; struct dev_archdata *archdata; -#ifdef CONFIG_OF struct device_node *of_node; -#endif int irq; }; diff --git a/include/linux/of.h b/include/linux/of.h index cad7cf0..266db1d0 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -23,8 +23,6 @@ #include <asm/byteorder.h> -#ifdef CONFIG_OF - typedef u32 phandle; typedef u32 ihandle; @@ -65,11 +63,18 @@ struct device_node { #endif }; +#ifdef CONFIG_OF + /* Pointer for first entry in chain of all nodes. */ extern struct device_node *allnodes; extern struct device_node *of_chosen; extern rwlock_t devtree_lock; +static inline bool of_have_populated_dt(void) +{ + return allnodes != NULL; +} + static inline bool of_node_is_root(const struct device_node *node) { return node && (node->parent == NULL); @@ -222,5 +227,12 @@ extern void of_attach_node(struct device_node *); extern void of_detach_node(struct device_node *); #endif +#else + +static inline bool of_have_populated_dt(void) +{ + return false; +} + #endif /* CONFIG_OF */ #endif /* _LINUX_OF_H */ diff --git a/include/linux/of_pci.h b/include/linux/of_pci.h new file mode 100644 index 0000000..85a27b6 --- /dev/null +++ b/include/linux/of_pci.h @@ -0,0 +1,9 @@ +#ifndef __OF_PCI_H +#define __OF_PCI_H + +#include <linux/pci.h> + +struct pci_dev; +struct of_irq; +int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq); +#endif |