diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-10-28 19:17:00 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-10-28 19:17:00 (GMT) |
commit | 150cd843fac0160fce616fb3e5cbe64e9db7481e (patch) | |
tree | eca7ed23a2238665462ff92fe6e9b591da3e092a /Documentation | |
parent | f063a0c0c995d010960efcc1b2ed14b99674f25c (diff) | |
parent | 44c1bcd4bcde32b2a31a6775a277706ab489c0dc (diff) | |
download | linux-fsl-qoriq-150cd843fac0160fce616fb3e5cbe64e9db7481e.tar.xz |
Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (68 commits)
hwmon: (it87) Add support for the IT8721F/IT8758E
hwmon: (it87) Move conversion functions
hwmon: Remove many EXPERIMENTAL flags
hwmon: (lm85) Add support for ADT7468 high-frequency PWM mode
hwmon: (lm85) Document the ADT7468 as supported
hwmon: (lm85) Fix ADT7468 frequency table
hwmon: I2C addresses are constant
Move ams driver to macintosh
hwmon: (pcf8591) Don't attempt to detect devices
hwmon: (pcf8591) Register as a hwmon device
hwmon: (w83795) Use standard attributes for chassis intrusion
hwmon: (w83795) Exclude fan control feature by default
hwmon: (w83795) Add myself as co-author and maintainer
hwmon: (w83795) More style cleanups
hwmon: (w83795) Fix LSB reading of voltage limits
hwmon: (w83795) Use dev_get_drvdata() where possible
hwmon: (w83795) Delay reading pwm config registers
hwmon: (w83795) Delay reading limit registers
hwmon: (w83795) Move register reads to dedicated functions
hwmon: (w83795) Pack similar register reads
...
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/hwmon/it87 | 28 | ||||
-rw-r--r-- | Documentation/hwmon/lm85 | 60 | ||||
-rw-r--r-- | Documentation/hwmon/lm90 | 42 | ||||
-rw-r--r-- | Documentation/hwmon/pcf8591 | 18 | ||||
-rw-r--r-- | Documentation/hwmon/sysfs-interface | 15 |
5 files changed, 112 insertions, 51 deletions
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index 8d08bf0..38425f0 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -22,6 +22,10 @@ Supported chips: Prefix: 'it8720' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Not publicly available + * IT8721F/IT8758E + Prefix: 'it8721' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available * SiS950 [clone of IT8705F] Prefix: 'it87' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -67,7 +71,7 @@ Description ----------- This driver implements support for the IT8705F, IT8712F, IT8716F, -IT8718F, IT8720F, IT8726F and SiS950 chips. +IT8718F, IT8720F, IT8721F, IT8726F, IT8758E and SiS950 chips. These chips are 'Super I/O chips', supporting floppy disks, infrared ports, joysticks and other miscellaneous stuff. For hardware monitoring, they @@ -86,14 +90,15 @@ the driver won't notice and report changes in the VID value. The two upper VID bits share their pins with voltage inputs (in5 and in6) so you can't have both on a given board. -The IT8716F, IT8718F, IT8720F and later IT8712F revisions have support for -2 additional fans. The additional fans are supported by the driver. +The IT8716F, IT8718F, IT8720F, IT8721F/IT8758E and later IT8712F revisions +have support for 2 additional fans. The additional fans are supported by the +driver. -The IT8716F, IT8718F and IT8720F, and late IT8712F and IT8705F also have -optional 16-bit tachometer counters for fans 1 to 3. This is better (no more -fan clock divider mess) but not compatible with the older chips and -revisions. The 16-bit tachometer mode is enabled by the driver when one -of the above chips is detected. +The IT8716F, IT8718F, IT8720F and IT8721F/IT8758E, and late IT8712F and +IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This +is better (no more fan clock divider mess) but not compatible with the older +chips and revisions. The 16-bit tachometer mode is enabled by the driver when +one of the above chips is detected. The IT8726F is just bit enhanced IT8716F with additional hardware for AMD power sequencing. Therefore the chip will appear as IT8716F @@ -115,7 +120,12 @@ alarm is triggered if the voltage has crossed a programmable minimum or maximum limit. Note that minimum in this case always means 'closest to zero'; this is important for negative voltage measurements. All voltage inputs can measure voltages between 0 and 4.08 volts, with a resolution of -0.016 volt. The battery voltage in8 does not have limit registers. +0.016 volt (except IT8721F/IT8758E: 0.012 volt.) The battery voltage in8 does +not have limit registers. + +On the IT8721F/IT8758E, some voltage inputs are internal and scaled inside +the chip (in7, in8 and optionally in3). The driver handles this transparently +so user-space doesn't have to care. The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value: the voltage level your processor should work with. This is hardcoded by diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85 index b98e0e0..239258a 100644 --- a/Documentation/hwmon/lm85 +++ b/Documentation/hwmon/lm85 @@ -14,6 +14,10 @@ Supported chips: Prefix: 'adt7463' Addresses scanned: I2C 0x2c, 0x2d, 0x2e Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADT7463 + * Analog Devices ADT7468 + Prefix: 'adt7468' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: http://www.onsemi.com/PowerSolutions/product.do?id=ADT7468 * SMSC EMC6D100, SMSC EMC6D101 Prefix: 'emc6d100' Addresses scanned: I2C 0x2c, 0x2d, 0x2e @@ -34,7 +38,7 @@ Description ----------- This driver implements support for the National Semiconductor LM85 and -compatible chips including the Analog Devices ADM1027, ADT7463 and +compatible chips including the Analog Devices ADM1027, ADT7463, ADT7468 and SMSC EMC6D10x chips family. The LM85 uses the 2-wire interface compatible with the SMBUS 2.0 @@ -87,14 +91,22 @@ To smooth the response of fans to changes in temperature, the LM85 has an optional filter for smoothing temperatures. The ADM1027 has the same config option but uses it to rate limit the changes to fan speed instead. -The ADM1027 and ADT7463 have a 10-bit ADC and can therefore measure -temperatures with 0.25 degC resolution. They also provide an offset to the -temperature readings that is automatically applied during measurement. -This offset can be used to zero out any errors due to traces and placement. -The documentation says that the offset is in 0.25 degC steps, but in -initial testing of the ADM1027 it was 1.00 degC steps. Analog Devices has -confirmed this "bug". The ADT7463 is reported to work as described in the -documentation. The current lm85 driver does not show the offset register. +The ADM1027, ADT7463 and ADT7468 have a 10-bit ADC and can therefore +measure temperatures with 0.25 degC resolution. They also provide an offset +to the temperature readings that is automatically applied during +measurement. This offset can be used to zero out any errors due to traces +and placement. The documentation says that the offset is in 0.25 degC +steps, but in initial testing of the ADM1027 it was 1.00 degC steps. Analog +Devices has confirmed this "bug". The ADT7463 is reported to work as +described in the documentation. The current lm85 driver does not show the +offset register. + +The ADT7468 has a high-frequency PWM mode, where all PWM outputs are +driven by a 22.5 kHz clock. This is a global mode, not per-PWM output, +which means that setting any PWM frequency above 11.3 kHz will switch +all 3 PWM outputs to a 22.5 kHz frequency. Conversely, setting any PWM +frequency below 11.3 kHz will switch all 3 PWM outputs to a frequency +between 10 and 100 Hz, which can then be tuned separately. See the vendor datasheets for more information. There is application note from National (AN-1260) with some additional information about the LM85. @@ -125,17 +137,17 @@ datasheet for a complete description of the differences. Other than identifying the chip, the driver behaves no differently with regard to these two chips. The LM85B is recommended for new designs. -The ADM1027 and ADT7463 chips have an optional SMBALERT output that can be -used to signal the chipset in case a limit is exceeded or the temperature -sensors fail. Individual sensor interrupts can be masked so they won't -trigger SMBALERT. The SMBALERT output if configured replaces one of the other -functions (PWM2 or IN0). This functionality is not implemented in current -driver. +The ADM1027, ADT7463 and ADT7468 chips have an optional SMBALERT output +that can be used to signal the chipset in case a limit is exceeded or the +temperature sensors fail. Individual sensor interrupts can be masked so +they won't trigger SMBALERT. The SMBALERT output if configured replaces one +of the other functions (PWM2 or IN0). This functionality is not implemented +in current driver. -The ADT7463 also has an optional THERM output/input which can be connected -to the processor PROC_HOT output. If available, the autofan control -dynamic Tmin feature can be enabled to keep the system temperature within -spec (just?!) with the least possible fan noise. +The ADT7463 and ADT7468 also have an optional THERM output/input which can +be connected to the processor PROC_HOT output. If available, the autofan +control dynamic Tmin feature can be enabled to keep the system temperature +within spec (just?!) with the least possible fan noise. Configuration Notes ------------------- @@ -201,8 +213,8 @@ the temperatures to compensate for systemic errors in the measurements. These features are not currently supported by the lm85 driver. -In addition to the ADM1027 features, the ADT7463 also has Tmin control -and THERM asserted counts. Automatic Tmin control acts to adjust the -Tmin value to maintain the measured temperature sensor at a specified -temperature. There isn't much documentation on this feature in the -ADT7463 data sheet. This is not supported by current driver. +In addition to the ADM1027 features, the ADT7463 and ADT7468 also have +Tmin control and THERM asserted counts. Automatic Tmin control acts to +adjust the Tmin value to maintain the measured temperature sensor at a +specified temperature. There isn't much documentation on this feature in +the ADT7463 data sheet. This is not supported by current driver. diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index 6a03dd4..fa475c0 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -63,8 +63,8 @@ Supported chips: Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 * Maxim MAX6659 - Prefix: 'max6657' - Addresses scanned: I2C 0x4c, 0x4d (unsupported 0x4e) + Prefix: 'max6659' + Addresses scanned: I2C 0x4c, 0x4d, 0x4e Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 * Maxim MAX6680 @@ -84,6 +84,21 @@ Supported chips: Addresses scanned: I2C 0x4c Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 + * Maxim MAX6695 + Prefix: 'max6695' + Addresses scanned: I2C 0x18 + Datasheet: Publicly available at the Maxim website + http://www.maxim-ic.com/datasheet/index.mvp/id/4199 + * Maxim MAX6696 + Prefix: 'max6695' + Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, + 0x4c, 0x4d and 0x4e + Datasheet: Publicly available at the Maxim website + http://www.maxim-ic.com/datasheet/index.mvp/id/4199 + * Winbond/Nuvoton W83L771W/G + Prefix: 'w83l771' + Addresses scanned: I2C 0x4c + Datasheet: No longer available * Winbond/Nuvoton W83L771AWG/ASG Prefix: 'w83l771' Addresses scanned: I2C 0x4c @@ -101,10 +116,11 @@ well as the temperature of up to one external diode. It is compatible with many other devices, many of which are supported by this driver. Note that there is no easy way to differentiate between the MAX6657, -MAX6658 and MAX6659 variants. The extra address and features of the -MAX6659 are not supported by this driver. The MAX6680 and MAX6681 only -differ in their pinout, therefore they obviously can't (and don't need to) -be distinguished. +MAX6658 and MAX6659 variants. The extra features of the MAX6659 are only +supported by this driver if the chip is located at address 0x4d or 0x4e, +or if the chip type is explicitly selected as max6659. +The MAX6680 and MAX6681 only differ in their pinout, therefore they obviously +can't (and don't need to) be distinguished. The specificity of this family of chipsets over the ADM1021/LM84 family is that it features critical limits with hysteresis, and an @@ -151,11 +167,21 @@ MAX6680 and MAX6681: * Selectable address * Remote sensor type selection +MAX6695 and MAX6696: + * Better local resolution + * Selectable address (max6696) + * Second critical temperature limit + * Two remote sensors + +W83L771W/G + * The G variant is lead-free, otherwise similar to the W. + * Filter and alert configuration register at 0xBF + * Moving average (depending on conversion rate) + W83L771AWG/ASG + * Successor of the W83L771W/G, same features. * The AWG and ASG variants only differ in package format. - * Filter and alert configuration register at 0xBF * Diode ideality factor configuration (remote sensor) at 0xE3 - * Moving average (depending on conversion rate) All temperature values are given in degrees Celsius. Resolution is 1.0 degree for the local temperature, 0.125 degree for the remote diff --git a/Documentation/hwmon/pcf8591 b/Documentation/hwmon/pcf8591 index e76a789..ac020b3 100644 --- a/Documentation/hwmon/pcf8591 +++ b/Documentation/hwmon/pcf8591 @@ -4,7 +4,7 @@ Kernel driver pcf8591 Supported chips: * Philips/NXP PCF8591 Prefix: 'pcf8591' - Addresses scanned: I2C 0x48 - 0x4f + Addresses scanned: none Datasheet: Publicly available at the NXP website http://www.nxp.com/pip/PCF8591_6.html @@ -58,18 +58,16 @@ Module parameters Accessing PCF8591 via /sys interface ------------------------------------- -! Be careful ! -The PCF8591 is plainly impossible to detect! Stupid chip. -So every chip with address in the interval [0x48..0x4f] is -detected as PCF8591. If you have other chips in this address -range, the workaround is to load this module after the one -for your others chips. +The PCF8591 is plainly impossible to detect! Thus the driver won't even +try. You have to explicitly instantiate the device at the relevant +address (in the interval [0x48..0x4f]) either through platform data, or +using the sysfs interface. See Documentation/i2c/instantiating-devices +for details. -On detection (i.e. insmod, modprobe et al.), directories are being -created for each detected PCF8591: +Directories are being created for each instantiated PCF8591: /sys/bus/i2c/devices/<0>-<1>/ -where <0> is the bus the chip was detected on (e. g. i2c-0) +where <0> is the bus the chip is connected to (e. g. i2c-0) and <1> the chip address ([48..4f]) Inside these directories, there are such files: diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 48ceabe..6456990 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -309,6 +309,20 @@ temp[1-*]_crit_hyst from the critical value. RW +temp[1-*]_emergency + Temperature emergency max value, for chips supporting more than + two upper temperature limits. Must be equal or greater than + corresponding temp_crit values. + Unit: millidegree Celsius + RW + +temp[1-*]_emergency_hyst + Temperature hysteresis value for emergency limit. + Unit: millidegree Celsius + Must be reported as an absolute temperature, NOT a delta + from the emergency value. + RW + temp[1-*]_lcrit Temperature critical min value, typically lower than corresponding temp_min values. Unit: millidegree Celsius @@ -505,6 +519,7 @@ fan[1-*]_max_alarm temp[1-*]_min_alarm temp[1-*]_max_alarm temp[1-*]_crit_alarm +temp[1-*]_emergency_alarm Limit alarm 0: no alarm 1: alarm |