diff options
author | Matt LaPlante <kernel1@cyberdogtech.com> | 2006-10-03 20:55:17 (GMT) |
---|---|---|
committer | Adrian Bunk <bunk@stusta.de> | 2006-10-03 20:55:17 (GMT) |
commit | 53cb47268e6b38180d9f253527135e1c69c5d310 (patch) | |
tree | b264d89e3d21f0365fc4df0f32f5070bb4c6e91a /Documentation | |
parent | d6bc8ac9e13e466e844313b590fbc49f7f1abdea (diff) | |
download | linux-fsl-qoriq-53cb47268e6b38180d9f253527135e1c69c5d310.tar.xz |
Fix typos in Documentation/: 'S'
This patch fixes typos in various Documentation txts. The patch addresses
some words starting with the letter 'S'.
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Alan Cox <alan@redhat.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Diffstat (limited to 'Documentation')
30 files changed, 72 insertions, 71 deletions
diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index 318df44..f8092a8 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -582,7 +582,7 @@ The rcu_read_lock() and rcu_read_unlock() primitive read-acquire and release a global reader-writer lock. The synchronize_rcu() primitive write-acquires this same lock, then immediately releases it. This means that once synchronize_rcu() exits, all RCU read-side -critical sections that were in progress before synchonize_rcu() was +critical sections that were in progress before synchronize_rcu() was called are guaranteed to have completed -- there is no way that synchronize_rcu() would have been able to write-acquire the lock otherwise. diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index c41a3e1..e2f7dc6 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -890,7 +890,7 @@ Aside: Kvec i/o: - Ben LaHaise's aio code uses a slighly different structure instead + Ben LaHaise's aio code uses a slightly different structure instead of kiobufs, called a kvec_cb. This contains an array of <page, offset, len> tuples (very much like the networking code), together with a callback function and data pointer. This is embedded into a brw_cb structure when passed @@ -988,7 +988,7 @@ elevator_exit_fn Allocate and free any elevator specific storage for a queue. 4.2 Request flows seen by I/O schedulers -All requests seens by I/O schedulers strictly follow one of the following three +All requests seen by I/O schedulers strictly follow one of the following three flows. set_req_fn -> diff --git a/Documentation/cpu-freq/cpufreq-stats.txt b/Documentation/cpu-freq/cpufreq-stats.txt index 48bc2f1..53d62c1 100644 --- a/Documentation/cpu-freq/cpufreq-stats.txt +++ b/Documentation/cpu-freq/cpufreq-stats.txt @@ -1,5 +1,5 @@ - CPU frequency and voltage scaling statictics in the Linux(TM) kernel + CPU frequency and voltage scaling statistics in the Linux(TM) kernel L i n u x c p u f r e q - s t a t s d r i v e r @@ -18,8 +18,8 @@ Contents 1. Introduction cpufreq-stats is a driver that provices CPU frequency statistics for each CPU. -This statistics is provided in /sysfs as a bunch of read_only interfaces. This -interface (when configured) will appear in a seperate directory under cpufreq +These statistics are provided in /sysfs as a bunch of read_only interfaces. This +interface (when configured) will appear in a separate directory under cpufreq in /sysfs (<sysfs root>/devices/system/cpu/cpuX/cpufreq/stats/) for each CPU. Various statistics will form read_only files under this directory. @@ -115,7 +115,7 @@ basic statistics which includes time_in_state and total_trans. "CPU frequency translation statistics details" (CONFIG_CPU_FREQ_STAT_DETAILS) provides fine grained cpufreq stats by trans_table. The reason for having a -seperate config option for trans_table is: +separate config option for trans_table is: - trans_table goes against the traditional /sysfs rule of one value per interface. It provides a whole bunch of value in a 2 dimensional matrix form. diff --git a/Documentation/dvb/cards.txt b/Documentation/dvb/cards.txt index 9e10092..ca58e33 100644 --- a/Documentation/dvb/cards.txt +++ b/Documentation/dvb/cards.txt @@ -5,7 +5,7 @@ Hardware supported by the linuxtv.org DVB drivers frontends (i.e. tuner / demodulator units) used, usually without changing the product name, revision number or specs. Some cards are also available in versions with different frontends for - DVB-S/DVB-C/DVB-T. Thus the frontend drivers are listed seperately. + DVB-S/DVB-C/DVB-T. Thus the frontend drivers are listed separately. Note 1: There is no guarantee that every frontend driver works out of the box with every card, because of different wiring. diff --git a/Documentation/fb/sstfb.txt b/Documentation/fb/sstfb.txt index ccdcfec..df27f5b 100644 --- a/Documentation/fb/sstfb.txt +++ b/Documentation/fb/sstfb.txt @@ -137,23 +137,23 @@ Bugs - The driver is 16 bpp only, 24/32 won't work. - The driver is not your_favorite_toy-safe. this includes SMP... [Actually from inspection it seems to be safe - Alan] - - when using XFree86 FBdev (X over fbdev) you may see strange color + - When using XFree86 FBdev (X over fbdev) you may see strange color patterns at the border of your windows (the pixels lose the lowest - byte -> basicaly the blue component nd some of the green) . I'm unable + byte -> basically the blue component and some of the green). I'm unable to reproduce this with XFree86-3.3, but one of the testers has this - problem with XFree86-4. apparently recent Xfree86-4.x solve this + problem with XFree86-4. Apparently recent Xfree86-4.x solve this problem. - I didn't really test changing the palette, so you may find some weird things when playing with that. - - Sometimes the driver will not recognise the DAC , and the - initialisation will fail. this is specificaly true for - voodoo 2 boards , but it should be solved in recent versions. please - contact me . - - the 24/32 is not likely to work anytime soon , knowing that the - hardware does ... unusual thigs in 24/32 bpp - - When used with anther video board, current limitations of linux - console subsystem can cause some troubles, specificaly, you should - disable software scrollback , as it can oops badly ... + - Sometimes the driver will not recognise the DAC, and the + initialisation will fail. This is specifically true for + voodoo 2 boards, but it should be solved in recent versions. Please + contact me. + - The 24/32 is not likely to work anytime soon, knowing that the + hardware does ... unusual things in 24/32 bpp. + - When used with another video board, current limitations of the linux + console subsystem can cause some troubles, specifically, you should + disable software scrollback, as it can oops badly ... Todo diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt index 8bf0369..c3a7afb 100644 --- a/Documentation/filesystems/configfs/configfs.txt +++ b/Documentation/filesystems/configfs/configfs.txt @@ -254,7 +254,7 @@ using the group _init() functions on the group. Finally, when userspace calls rmdir(2) on the item or group, ct_group_ops->drop_item() is called. As a config_group is also a -config_item, it is not necessary for a seperate drop_group() method. +config_item, it is not necessary for a separate drop_group() method. The subsystem must config_item_put() the reference that was initialized upon item allocation. If a subsystem has no work to do, it may omit the ct_group_ops->drop_item() method, and configfs will call diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 59763d6..3355e69 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1255,7 +1255,7 @@ to allocate (but not use) more memory than is actually available. address space are refused. Used for a typical system. It ensures a seriously wild allocation fails while allowing overcommit to reduce swap usage. root is allowed to - allocate slighly more memory in this mode. This is the + allocate slightly more memory in this mode. This is the default. 1 - Always overcommit. Appropriate for some scientific @@ -1857,7 +1857,7 @@ proxy_qlen Maximum queue length of the delayed proxy arp timer. (see proxy_delay). -app_solcit +app_solicit ---------- Determines the number of requests to send to the user level ARP daemon. Use 0 diff --git a/Documentation/hrtimers.txt b/Documentation/hrtimers.txt index 1fbad1a..ce31f65 100644 --- a/Documentation/hrtimers.txt +++ b/Documentation/hrtimers.txt @@ -58,7 +58,7 @@ several reasons why such integration is hard/impossible: The primary users of precision timers are user-space applications that utilize nanosleep, posix-timers and itimer interfaces. Also, in-kernel users like drivers and subsystems which require precise timed events -(e.g. multimedia) can benefit from the availability of a seperate +(e.g. multimedia) can benefit from the availability of a separate high-resolution timer subsystem as well. While this subsystem does not offer high-resolution clock sources just @@ -68,7 +68,7 @@ The increasing demand for realtime and multimedia applications along with other potential users for precise timers gives another reason to separate the "timeout" and "precise timer" subsystems. -Another potential benefit is that such a seperation allows even more +Another potential benefit is that such a separation allows even more special-purpose optimization of the existing timer wheel for the low resolution and low precision use cases - once the precision-sensitive APIs are separated from the timer wheel and are migrated over to @@ -96,8 +96,8 @@ file systems. The rbtree is solely used for time sorted ordering, while a separate list is used to give the expiry code fast access to the queued timers, without having to walk the rbtree. -(This seperate list is also useful for later when we'll introduce -high-resolution clocks, where we need seperate pending and expired +(This separate list is also useful for later when we'll introduce +high-resolution clocks, where we need separate pending and expired queues while keeping the time-order intact.) Time-ordered enqueueing is not purely for the purposes of diff --git a/Documentation/input/yealink.txt b/Documentation/input/yealink.txt index 8bf2add..0a8c97e 100644 --- a/Documentation/input/yealink.txt +++ b/Documentation/input/yealink.txt @@ -87,7 +87,7 @@ Line 3 Format : 888888888888 Format description: - From a user space perspective the world is seperated in "digits" and "icons". + From a userspace perspective the world is separated into "digits" and "icons". A digit can have a character set, an icon can only be ON or OFF. Format specifier diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt index 003fccc..7f34778d 100644 --- a/Documentation/kbuild/kconfig-language.txt +++ b/Documentation/kbuild/kconfig-language.txt @@ -110,7 +110,7 @@ applicable everywhere (see syntax). the indentation level, this means it ends at the first line which has a smaller indentation than the first line of the help text. "---help---" and "help" do not differ in behaviour, "---help---" is - used to help visually seperate configuration logic from help within + used to help visually separate configuration logic from help within the file as an aid to developers. @@ -226,7 +226,7 @@ menuconfig: "menuconfig" <symbol> <config options> -This is similiar to the simple config entry above, but it also gives a +This is similar to the simple config entry above, but it also gives a hint to front ends, that all suboptions should be displayed as a separate list of options. diff --git a/Documentation/networking/slicecom.txt b/Documentation/networking/slicecom.txt index 5fb21d5..2f04c92 100644 --- a/Documentation/networking/slicecom.txt +++ b/Documentation/networking/slicecom.txt @@ -262,7 +262,7 @@ which begin with '//' are the comments. // initialised. // AUXP - Auxiliary Pattern Indication - 01010101.. received. // LFA - Loss of Frame Alignment - no frame sync received. -// RRA - Receive Remote Alarm - the remote end's OK, but singnals error cond. +// RRA - Receive Remote Alarm - the remote end's OK, but signals error cond. // LMFA - Loss of CRC4 Multiframe Alignment - no CRC4 multiframe sync. // NMF - No Multiframe alignment Found after 400 msec - no such alarm using // no-crc4 or crc4 framing, see below. @@ -364,6 +364,6 @@ Treat them very carefully, these can cause much trouble! # echo >lbireg 0x1d 0x21 - - Swithing the loop off: + - Switching the loop off: # echo >lbireg 0x1d 0x00 diff --git a/Documentation/networking/smctr.txt b/Documentation/networking/smctr.txt index 4c866f5..9af25b8 100644 --- a/Documentation/networking/smctr.txt +++ b/Documentation/networking/smctr.txt @@ -11,7 +11,7 @@ This driver is rather simple to use. Select Y to Token Ring adapter support in the kernel configuration. A choice for SMC Token Ring adapters will appear. This drives supports all SMC ISA/MCA adapters. Choose this option. I personally recommend compiling the driver as a module (M), but if you -you would like to compile it staticly answer Y instead. +you would like to compile it statically answer Y instead. This driver supports multiple adapters without the need to load multiple copies of the driver. You should be able to load up to 7 adapters without any kernel diff --git a/Documentation/networking/tms380tr.txt b/Documentation/networking/tms380tr.txt index 179e527..c169a57 100644 --- a/Documentation/networking/tms380tr.txt +++ b/Documentation/networking/tms380tr.txt @@ -24,7 +24,7 @@ This driver is rather simple to use. Select Y to Token Ring adapter support in the kernel configuration. A choice for SysKonnect Token Ring adapters will appear. This drives supports all SysKonnect ISA and PCI adapters. Choose this option. I personally recommend compiling the driver as a module (M), but if you -you would like to compile it staticly answer Y instead. +you would like to compile it statically answer Y instead. This driver supports multiple adapters without the need to load multiple copies of the driver. You should be able to load up to 7 adapters without any kernel diff --git a/Documentation/power/tricks.txt b/Documentation/power/tricks.txt index c6d58d3..3b26bb5 100644 --- a/Documentation/power/tricks.txt +++ b/Documentation/power/tricks.txt @@ -9,7 +9,7 @@ If you want to trick swsusp/S3 into working, you might want to try: * turn off APIC and preempt -* use ext2. At least it has working fsck. [If something seemes to go +* use ext2. At least it has working fsck. [If something seems to go wrong, force fsck when you have a chance] * turn off modules diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 8ca9a56..1ccc8a5 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -550,11 +550,11 @@ Here's the basic structure of a single node: * [child nodes if any] * token OF_DT_END_NODE (that is 0x00000002) -So the node content can be summmarised as a start token, a full path, -a list of properties, a list of child node and an end token. Every +So the node content can be summarised as a start token, a full path, +a list of properties, a list of child nodes, and an end token. Every child node is a full node structure itself as defined above. -4) Device tree 'strings" block +4) Device tree "strings" block In order to save space, property names, which are generally redundant, are stored separately in the "strings" block. This block is simply the diff --git a/Documentation/rocket.txt b/Documentation/rocket.txt index 2d11ad6..1d85829 100644 --- a/Documentation/rocket.txt +++ b/Documentation/rocket.txt @@ -97,7 +97,7 @@ a range of I/O addresses for it to use. The first RocketPort card requires a 68-byte contiguous block of I/O addresses, starting at one of the following: 0x100h, 0x140h, 0x180h, 0x200h, 0x240h, 0x280h, 0x300h, 0x340h, 0x380h. This I/O address must be reflected in the DIP -switiches of *all* of the Rocketport cards. +switches of *all* of the Rocketport cards. The second, third, and fourth RocketPort cards require a 64-byte contiguous block of I/O addresses, starting at one of the following diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt index 2d826d8..c051ba2 100644 --- a/Documentation/s390/Debugging390.txt +++ b/Documentation/s390/Debugging390.txt @@ -317,9 +317,9 @@ Each process/thread under Linux for S390 has its own kernel task_struct defined in linux/include/linux/sched.h The S390 on initialisation & resuming of a process on a cpu sets the __LC_KERNEL_STACK variable in the spare prefix area for this cpu -( which we use for per processor globals). +(which we use for per-processor globals). -The kernel stack pointer is intimately tied with the task stucture for +The kernel stack pointer is intimately tied with the task structure for each processor as follows. s/390 @@ -973,8 +973,9 @@ through the pipe for each line containing the string open. Example 3 --------- -Getting sophistocated -telnetd crashes on & I don't know why +Getting sophisticated +telnetd crashes & I don't know why + Steps ----- 1) Replace the following line in /etc/inetd.conf @@ -1836,7 +1837,7 @@ RDRLIST RECEIVE / LOG TXT A1 ( replace 8) filel & press F11 to look at it -You should see someting like. +You should see something like: 00020942' SSCH B2334000 0048813C CC 0 SCH 0000 DEV 7C08 CPA 000FFDF0 PARM 00E2C9C4 KEY 0 FPI C0 LPM 80 diff --git a/Documentation/s390/monreader.txt b/Documentation/s390/monreader.txt index d843bb0..beeaa4b 100644 --- a/Documentation/s390/monreader.txt +++ b/Documentation/s390/monreader.txt @@ -83,7 +83,7 @@ This loads the module and sets the DCSS name to "MYDCSS". NOTE: ----- -This API provides no interface to control the *MONITOR service, e.g. specifiy +This API provides no interface to control the *MONITOR service, e.g. specify which data should be collected. This can be done by the CP command MONITOR (Class E privileged), see "CP Command and Utility Reference". diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt index ee03678..3367130 100644 --- a/Documentation/scsi/aacraid.txt +++ b/Documentation/scsi/aacraid.txt @@ -4,7 +4,7 @@ Introduction ------------------------- The aacraid driver adds support for Adaptec (http://www.adaptec.com) RAID controllers. This is a major rewrite from the original -Adaptec supplied driver. It has signficantly cleaned up both the code +Adaptec supplied driver. It has significantly cleaned up both the code and the running binary size (the module is less than half the size of the original). diff --git a/Documentation/scsi/aic79xx.txt b/Documentation/scsi/aic79xx.txt index 2084ad5..904d49e 100644 --- a/Documentation/scsi/aic79xx.txt +++ b/Documentation/scsi/aic79xx.txt @@ -81,7 +81,7 @@ The following information is available in this file: an SDTR with an offset of 0 to be sure the target knows we are async. This works around a firmware defect in the Quantum Atlas 10K. - - Implement controller susupend and resume. + - Implement controller suspend and resume. - Clear PCI error state during driver attach so that we don't disable memory mapped I/O due to a stray write by some other driver probe that occurred before we diff --git a/Documentation/scsi/aic7xxx_old.txt b/Documentation/scsi/aic7xxx_old.txt index 1c8c69b..c92f447 100644 --- a/Documentation/scsi/aic7xxx_old.txt +++ b/Documentation/scsi/aic7xxx_old.txt @@ -241,7 +241,7 @@ linux-1.1.x and fairly stable since linux-1.2.x, and are also in FreeBSD that instead of dumping the register contents on the card, this option dumps the contents of the sequencer program RAM. This gives the ability to verify that the instructions downloaded to the - card's sequencer are indeed what they are suppossed to be. Again, + card's sequencer are indeed what they are supposed to be. Again, unless you have documentation to tell you how to interpret these numbers, then it is totally useless. diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt index 9b95163..35f6b8e 100644 --- a/Documentation/scsi/ibmmca.txt +++ b/Documentation/scsi/ibmmca.txt @@ -309,9 +309,9 @@ 2.6 Abort & Reset Commands -------------------------- These are implemented with busy waiting for interrupt to arrive. - ibmmca_reset() and ibmmca_abort() do not work sufficently well - up to now and need still a lot of development work. But, this seems - to be even a problem with other SCSI-low level drivers, too. However, + ibmmca_reset() and ibmmca_abort() do not work sufficiently well + up to now and need still a lot of development work. This seems + to be a problem with other low-level SCSI drivers too, however this should be no excuse. 2.7 Disk Geometry @@ -684,8 +684,8 @@ not like sending commands to non-existing SCSI-devices and will react with a command error as a sign of protest. While this error is not present on IBM SCSI Adapter w/cache, it appears on IBM Integrated SCSI - Adapters. Therefore, I implemented a workarround to forgive those - adapters their protests, but it is marked up in the statisctis, so + Adapters. Therefore, I implemented a workaround to forgive those + adapters their protests, but it is marked up in the statistics, so after a successful boot, you can see in /proc/scsi/ibmmca/<host_number> how often the command errors have been forgiven to the SCSI-subsystem. If the number is bigger than 0, you have a SCSI subsystem of older @@ -778,15 +778,15 @@ not accept this, as they stick quite near to ANSI-SCSI and report a COMMAND_ERROR message which causes the driver to panic. The main problem was located around the INQUIRY command. Now, for all the - mentioned commands, the buffersize, sent to the adapter is at + mentioned commands, the buffersize sent to the adapter is at maximum 255 which seems to be a quite reasonable solution. - TEST_UNIT_READY gets a buffersize of 0 to make sure, that no + TEST_UNIT_READY gets a buffersize of 0 to make sure that no data is transferred in order to avoid any possible command failure. - 2) On unsuccessful TEST_UNIT_READY, the midlevel-driver has to send - a REQUEST_SENSE in order to see, where the problem is located. This + 2) On unsuccessful TEST_UNIT_READY, the mid-level driver has to send + a REQUEST_SENSE in order to see where the problem is located. This REQUEST_SENSE may have various length in its answer-buffer. IBM - SCSI-subsystems report a command failure, if the returned buffersize - is different from the sent buffersize, but this can be supressed by + SCSI-subsystems report a command failure if the returned buffersize + is different from the sent buffersize, but this can be suppressed by a special bit, which is now done and problems seem to be solved. 2) Code adaption to all kernel-releases. Now, the 3.2 code compiles on 2.0.x, 2.1.x, 2.2.x and 2.3.x kernel releases without any code-changes. @@ -1156,7 +1156,7 @@ Guide) what has to be done for reset, we still share the bad shape of the reset functions with all other low level SCSI-drivers. Astonishingly, reset works in most cases quite ok, but the harddisks - won't run in synchonous mode anymore after a reset, until you reboot. + won't run in synchronous mode anymore after a reset, until you reboot. Q: Why does my XXX w/Cache adapter not use read-prefetch? A: Ok, that is not completely possible. If a cache is present, the adapter tries to use it internally. Explicitly, one can use the cache diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt index ea8e98f..58ad8db 100644 --- a/Documentation/scsi/ncr53c8xx.txt +++ b/Documentation/scsi/ncr53c8xx.txt @@ -70,7 +70,7 @@ Written by Gerard Roudier <groudier@free.fr> 15. SCSI problem troubleshooting 15.1 Problem tracking 15.2 Understanding hardware error reports -16. Synchonous transfer negotiation tables +16. Synchronous transfer negotiation tables 16.1 Synchronous timings for 53C875 and 53C860 Ultra-SCSI controllers 16.2 Synchronous timings for fast SCSI-2 53C8XX controllers 17. Serial NVRAM support (by Richard Waltham) @@ -1382,7 +1382,7 @@ SCSI standards, chip cores functionnals and internal driver data structures. You are not required to decode and understand them, unless you want to help maintain the driver code. -16. Synchonous transfer negotiation tables +16. Synchronous transfer negotiation tables Tables below have been created by calling the routine the driver uses for synchronisation negotiation timing calculation and chip setting. diff --git a/Documentation/scsi/st.txt b/Documentation/scsi/st.txt index 20e30cf..66ba3ad 100644 --- a/Documentation/scsi/st.txt +++ b/Documentation/scsi/st.txt @@ -369,7 +369,7 @@ MTSETDRVBUFFER the device dependent address. It is recommended to set this flag unless there are tapes using the device dependent (from the old times) (global) - MT_ST_SYSV sets the SYSV sematics (mode) + MT_ST_SYSV sets the SYSV semantics (mode) MT_ST_NOWAIT enables immediate mode (i.e., don't wait for the command to finish) for some commands (e.g., rewind) MT_ST_DEBUGGING debugging (global; debugging must be diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt index 98d5f1e..26c8a08 100644 --- a/Documentation/scsi/sym53c8xx_2.txt +++ b/Documentation/scsi/sym53c8xx_2.txt @@ -67,7 +67,7 @@ under Linux is contained in 2 files named sym_glue.h and sym_glue.c. Other drivers files are intended not to depend on the Operating System on which the driver is used. -The history of this driver can be summerized as follows: +The history of this driver can be summarized as follows: 1993: ncr driver written for 386bsd and FreeBSD by: Wolfgang Stanglmeier <wolf@cologne.de> diff --git a/Documentation/sound/alsa/CMIPCI.txt b/Documentation/sound/alsa/CMIPCI.txt index 4cae047..4b2b153 100644 --- a/Documentation/sound/alsa/CMIPCI.txt +++ b/Documentation/sound/alsa/CMIPCI.txt @@ -16,11 +16,11 @@ As default, ALSA driver assigns the first PCM device (i.e. hw:0,0 for card#0) for front and 4/6ch playbacks, while the second PCM device (hw:0,1) is assigned to the second DAC for rear playback. -There are slight difference between two DACs. +There are slight differences between the two DACs: - The first DAC supports U8 and S16LE formats, while the second DAC supports only S16LE. -- The seconde DAC supports only two channel stereo. +- The second DAC supports only two channel stereo. Please note that the CM8x38 DAC doesn't support continuous playback rate but only fixed rates: 5512, 8000, 11025, 16000, 22050, 32000, diff --git a/Documentation/sound/alsa/MIXART.txt b/Documentation/sound/alsa/MIXART.txt index 9fa5bbd..ef42c44 100644 --- a/Documentation/sound/alsa/MIXART.txt +++ b/Documentation/sound/alsa/MIXART.txt @@ -39,7 +39,7 @@ For instance the playback devices are configured to have max. 4 substreams performing hardware mixing. This could be changed to a maximum of 24 substreams if wished. Mono files will be played on the left and right channel. Each channel -can be muted for each stream to use 8 analog/digital outputs seperately. +can be muted for each stream to use 8 analog/digital outputs separately. Capture ------- diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt index 18f04bd..f738b29 100644 --- a/Documentation/sound/alsa/Procfile.txt +++ b/Documentation/sound/alsa/Procfile.txt @@ -161,12 +161,12 @@ seq/drivers Lists the currently available ALSA sequencer drivers. seq/clients - Shows the list of currently available sequencer clinets and + Shows the list of currently available sequencer clients and ports. The connection status and the running status are shown in this file, too. seq/queues - Lists the currently allocated/running sequener queues. + Lists the currently allocated/running sequencer queues. seq/timer Lists the currently allocated/running sequencer timers. diff --git a/Documentation/usb/URB.txt b/Documentation/usb/URB.txt index a49e5f2..8ffce74 100644 --- a/Documentation/usb/URB.txt +++ b/Documentation/usb/URB.txt @@ -184,7 +184,7 @@ you can pass information to the completion handler. Note that even when an error (or unlink) is reported, data may have been transferred. That's because USB transfers are packetized; it might take sixteen packets to transfer your 1KByte buffer, and ten of them might -have transferred succesfully before the completion was called. +have transferred successfully before the completion was called. NOTE: ***** WARNING ***** diff --git a/Documentation/usb/mtouchusb.txt b/Documentation/usb/mtouchusb.txt index 9edf235..e43cfff 100644 --- a/Documentation/usb/mtouchusb.txt +++ b/Documentation/usb/mtouchusb.txt @@ -11,7 +11,7 @@ CHANGES Changed reset from standard USB dev reset to vendor reset Changed data sent to host from compensated to raw coordinates Eliminated vendor/product module params - Performed multiple successfull tests with an EXII-5010UC + Performed multiple successful tests with an EXII-5010UC SUPPORTED HARDWARE: |