Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This branch contains mostly additions and changes to platform
  enablement and SoC-level drivers.  Since there's sometimes a
  dependency on device-tree changes, there's also a fair amount of
  those in this branch.

  Pieces worth mentioning are:

   - Mbus driver for Marvell platforms, allowing kernel configuration
     and resource allocation of on-chip peripherals.
   - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
   - Preparation of MSI support for Marvell platforms.
   - Addition of new PCI-e host controller driver for Tegra platforms
   - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
     platforms in the device tree sources and header files.
   - Various suspend/PM updates for Tegra, including LP1 support.
   - Versatile Express support for MCPM, part of big little support.
   - Allwinner platform support for A20 and A31 SoCs (dual and quad
     Cortex-A7)
   - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.

  The code that touches other architectures are patches moving MSI
  arch-specific functions over to weak symbols and removal of
  ARCH_SUPPORTS_MSI, acked by PCI maintainers"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
  tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
  PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
  ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
  ARM: dts: vf610-twr: enable i2c0 device
  ARM: dts: i.MX51: Add one more I2C2 pinmux entry
  ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
  ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
  ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
  ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
  ARM: dts: i.MX27: Disable AUDMUX in the template
  ARM: dts: wandboard: Add support for SDIO bcm4329
  ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
  ARM: dts: imx53-qsb: Make USBH1 functional
  ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
  ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
  ARM: dts: imx6qdl-sabresd: Add touchscreen support
  ARM: imx: add ocram clock for imx53
  ARM: dts: imx: ocram size is different between imx6q and imx6dl
  ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
  ARM: dts: i.MX27: Remove clock name from CPU node
  ...

1 files changed, 65 insertions, 66 deletions

diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index e28e68f..bcf6d79 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -14,7 +14,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp-mv78460.dtsi"
+#include "armada-xp-mv78460.dtsi"
 
 / {
 	model = "Marvell Armada XP Evaluation Board";
@@ -30,9 +30,70 @@
 	};
 
 	soc {
-		ranges = <0          0 0xd0000000 0x100000	/* Internal registers 1MiB */
-			  0xe0000000 0 0xe0000000 0x8100000     /* PCIe */
-			  0xf0000000 0 0xf0000000 0x1000000>;	/* Device Bus, NOR 16MiB   */
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <8>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * All 6 slots are physically present as
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 0, Lane 1 */
+				status = "okay";
+			};
+			pcie@3,0 {
+				/* Port 0, Lane 2 */
+				status = "okay";
+			};
+			pcie@4,0 {
+				/* Port 0, Lane 3 */
+				status = "okay";
+			};
+			pcie@9,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+			pcie@10,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
 
 		internal-regs {
 			serial@12000 {
@@ -127,68 +188,6 @@
 					spi-max-frequency = <20000000>;
 				};
 			};
-
-			pcie-controller {
-				status = "okay";
-
-				/*
-				 * All 6 slots are physically present as
-				 * standard PCIe slots on the board.
-				 */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-				pcie@2,0 {
-					/* Port 0, Lane 1 */
-					status = "okay";
-				};
-				pcie@3,0 {
-					/* Port 0, Lane 2 */
-					status = "okay";
-				};
-				pcie@4,0 {
-					/* Port 0, Lane 3 */
-					status = "okay";
-				};
-				pcie@9,0 {
-					/* Port 2, Lane 0 */
-					status = "okay";
-				};
-				pcie@10,0 {
-					/* Port 3, Lane 0 */
-					status = "okay";
-				};
-			};
-
-			devbus-bootcs@10400 {
-				status = "okay";
-				ranges = <0 0xf0000000 0x1000000>;
-
-				/* Device Bus parameters are required */
-
-				/* Read parameters */
-				devbus,bus-width    = <8>;
-				devbus,turn-off-ps  = <60000>;
-				devbus,badr-skew-ps = <0>;
-				devbus,acc-first-ps = <124000>;
-				devbus,acc-next-ps  = <248000>;
-				devbus,rd-setup-ps  = <0>;
-				devbus,rd-hold-ps   = <0>;
-
-				/* Write parameters */
-				devbus,sync-enable = <0>;
-				devbus,wr-high-ps  = <60000>;
-				devbus,wr-low-ps   = <60000>;
-				devbus,ale-wr-ps   = <60000>;
-
-				/* NOR 16 MiB */
-				nor@0 {
-					compatible = "cfi-flash";
-					reg = <0 0x1000000>;
-					bank-width = <2>;
-				};
-			};
 		};
 	};
 };