Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "These changes from 30 individual branches for the most part update
  device tree files, but there are also a few source code changes that
  have crept in this time, usually in order to atomically move over a
  driver from using hardcoded data to DT probing.

  A number of platforms change their DT files to use the C preprocessor,
  which is causing a bit of churn, but that is hopefully only this once"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
  ARM: at91: dt: rm9200ek: add spi support
  ARM: at91: dt: rm9200: add spi support
  ARM: at91/DT: at91sam9n12: add SPI DMA client infos
  ARM: at91/DT: sama5d3: add SPI DMA client infos
  ARM: at91/DT: fix SPI compatibility string
  ARM: Kirkwood: Fix the internal register ranges translation
  ARM: dts: bcm281xx: change comment to C89 style
  ARM: mmc: bcm281xx SDHCI driver (dt mods)
  ARM: nomadik: add the new clocks to the device tree
  clk: nomadik: implement the Nomadik clocks properly
  ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
  ARM: dts: omap4-panda: Fix DVI EDID reads
  ARM: dts: omap4-panda: Add USB Host support
  arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
  ARM: shmobile: irqpin: add a DT property to enable masking on parent
  ARM: dts: AM43x EPOS EVM support
  ARM: dts: OMAP5: Add bandgap DT entry
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ...

1 files changed, 32 insertions, 76 deletions

diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index d27f724..38dc851 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -19,15 +19,21 @@
 	ocp@f1000000 {
 		serial@12000 {
 			status = "ok";
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
 		};
 
 		serial@12100 {
 			status = "ok";
+			pinctrl-0 = <&pmx_uart1>;
+			pinctrl-names = "default";
 		};
 
 		nand@3000000 {
 			chip-delay = <25>;
 			status = "okay";
+			pinctrl-0 = <&pmx_nand>;
+			pinctrl-names = "default";
 
 			partition@0 {
 				label = "uboot";
@@ -67,6 +73,8 @@
 
 		i2c@11100 {
 			status = "okay";
+			pinctrl-0 = <&pmx_twsi1>;
+			pinctrl-names = "default";
 
 			s35390a: s35390a@30 {
 				compatible = "s35390a";
@@ -75,16 +83,7 @@
 		};
 
 		pinctrl: pinctrl@10000 {
-			pinctrl-0 = < &pmx_nand &pmx_uart0
-				&pmx_uart1 &pmx_twsi1
-				&pmx_dip_sw0 &pmx_dip_sw1
-				&pmx_dip_sw2 &pmx_dip_sw3
-				&pmx_gpio_0 &pmx_gpio_1
-				&pmx_gpio_2 &pmx_gpio_3
-				&pmx_gpio_4 &pmx_gpio_5
-				&pmx_gpio_6 &pmx_gpio_7
-				&pmx_led_red &pmx_led_green
-				&pmx_led_yellow >;
+			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
 			pinctrl-names = "default";
 
 			pmx_uart0: pmx-uart0 {
@@ -104,63 +103,14 @@
 				marvell,function = "sysrst";
 			};
 
-			pmx_dip_sw0: pmx-dip-sw0 {
-				marvell,pins = "mpp20";
-				marvell,function = "gpio";
-			};
-
-			pmx_dip_sw1: pmx-dip-sw1 {
-				marvell,pins = "mpp21";
-				marvell,function = "gpio";
-			};
-
-			pmx_dip_sw2: pmx-dip-sw2 {
-				marvell,pins = "mpp22";
-				marvell,function = "gpio";
-			};
-
-			pmx_dip_sw3: pmx-dip-sw3 {
-				marvell,pins = "mpp23";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_0: pmx-gpio-0 {
-				marvell,pins = "mpp24";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_1: pmx-gpio-1 {
-				marvell,pins = "mpp25";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_2: pmx-gpio-2 {
-				marvell,pins = "mpp26";
+			pmx_dip_switches: pmx-dip-switches {
+				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23";
 				marvell,function = "gpio";
 			};
 
-			pmx_gpio_3: pmx-gpio-3 {
-				marvell,pins = "mpp27";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_4: pmx-gpio-4 {
-				marvell,pins = "mpp28";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_5: pmx-gpio-5 {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_6: pmx-gpio-6 {
-				marvell,pins = "mpp30";
-				marvell,function = "gpio";
-			};
-
-			pmx_gpio_7: pmx-gpio-7 {
-				marvell,pins = "mpp31";
+			pmx_gpio_header: pmx-gpio-header {
+				marvell,pins = "mpp24", "mpp25", "mpp26", "mpp27",
+					       "mpp28", "mpp29", "mpp30", "mpp31";
 				marvell,function = "gpio";
 			};
 
@@ -174,18 +124,8 @@
 				marvell,function = "gpio";
 			};
 
-			pmx_led_red: pmx-led-red {
-				marvell,pins = "mpp41";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_green: pmx-led-green {
-				marvell,pins = "mpp42";
-				marvell,function = "gpio";
-			};
-
-			pmx_led_yellow: pmx-led-yellow {
-				marvell,pins = "mpp43";
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp41", "mpp42", "mpp43";
 				marvell,function = "gpio";
 			};
 		};
@@ -193,6 +133,8 @@
 
 	gpio-leds {
 		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
 
 		led-red {
 			label = "obsa6:red:stat";
@@ -209,4 +151,18 @@
 			gpios = <&gpio1 11 1>;
 		};
         };
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_gpio_init>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Init Button";
+			linux,code = <116>;
+			gpios = <&gpio1 6 0>;
+		};
+	};
 };