Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "These changes from 30 individual branches for the most part update
  device tree files, but there are also a few source code changes that
  have crept in this time, usually in order to atomically move over a
  driver from using hardcoded data to DT probing.

  A number of platforms change their DT files to use the C preprocessor,
  which is causing a bit of churn, but that is hopefully only this once"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
  ARM: at91: dt: rm9200ek: add spi support
  ARM: at91: dt: rm9200: add spi support
  ARM: at91/DT: at91sam9n12: add SPI DMA client infos
  ARM: at91/DT: sama5d3: add SPI DMA client infos
  ARM: at91/DT: fix SPI compatibility string
  ARM: Kirkwood: Fix the internal register ranges translation
  ARM: dts: bcm281xx: change comment to C89 style
  ARM: mmc: bcm281xx SDHCI driver (dt mods)
  ARM: nomadik: add the new clocks to the device tree
  clk: nomadik: implement the Nomadik clocks properly
  ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
  ARM: dts: omap4-panda: Fix DVI EDID reads
  ARM: dts: omap4-panda: Add USB Host support
  arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
  ARM: shmobile: irqpin: add a DT property to enable masking on parent
  ARM: dts: AM43x EPOS EVM support
  ARM: dts: OMAP5: Add bandgap DT entry
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ...

1 files changed, 8 insertions, 8 deletions

diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
index e392bd2..1082c5e 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "tegra30-cardhu.dtsi"
+#include "tegra30-cardhu.dtsi"
 
 /* This dts file support the cardhu A02 version of board */
 
@@ -22,7 +22,7 @@
 			regulator-always-on;
 			regulator-boot-on;
 			enable-active-high;
-			gpio = <&pmic 6 0>;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
 		};
 
 		sys_3v3_reg: regulator@101 {
@@ -34,7 +34,7 @@
 			regulator-always-on;
 			regulator-boot-on;
 			enable-active-high;
-			gpio = <&pmic 7 0>;
+			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
 		};
 
 		usb1_vbus_reg: regulator@102 {
@@ -44,7 +44,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
-			gpio = <&gpio 68 0>; /* GPIO PI4 */
+			gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
 			gpio-open-drain;
 			vin-supply = <&vdd_5v0_reg>;
 		};
@@ -56,7 +56,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
-			gpio = <&gpio 63 0>; /* GPIO PH7 */
+			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
 			gpio-open-drain;
 			vin-supply = <&vdd_5v0_reg>;
 		};
@@ -68,7 +68,7 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			enable-active-high;
-			gpio = <&pmic 2 0>;
+			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
 		};
 
 		vdd_bl_reg: regulator@105 {
@@ -80,13 +80,13 @@
 			regulator-always-on;
 			regulator-boot-on;
 			enable-active-high;
-			gpio = <&gpio 83 0>; /* GPIO PK3 */
+			gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	sdhci@78000400 {
 		status = "okay";
-		power-gpios = <&gpio 28 0>; /* gpio PD4 */
+		power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
 		bus-width = <4>;
 		keep-power-in-suspend;
 	};