diff options
| author | Marc Kleine-Budde <mkl@pengutronix.de> | 2010-08-18 16:26:42 (GMT) |
|---|---|---|
| committer | Uwe Kleine-König <u.kleine-koenig@pengutronix.de> | 2010-09-27 10:52:57 (GMT) |
| commit | ab3d8b5859234d1d60b9592e9e9c5eaa9bb55678 (patch) | |
| tree | 24667a9b181f40d6b3deabd32cc02c75b0491893 /arch/arm/mach-mx3 | |
| parent | 79a11b0ba4a4e2f042b143e6ac0813d6fab90626 (diff) | |
| download | linux-fsl-qoriq-ab3d8b5859234d1d60b9592e9e9c5eaa9bb55678.tar.xz | |
ARM: mx3/mx35_3ds: add usb host2 support
we still have to toggle two pins on the mc9sdz60:
/* MUX3_CTR to be low for USB Host2 DP&DM */
pmic_gpio_set_bit_val(MCU_GPIO_REG_GPIO_CONTROL_2, 6, 0);
/* CAN_PWDN to be high for USB Host2 Power&OC */
pmic_gpio_set_bit_val(MCU_GPIO_REG_GPIO_CONTROL_2, 1, 1);
until we've a proper driver for the mx9sdz60 in linux we'll do this in
barebox (a.k.a. u-boot-v2)
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Diffstat (limited to 'arch/arm/mach-mx3')
| -rw-r--r-- | arch/arm/mach-mx3/mach-mx35_3ds.c | 13 |
1 files changed, 13 insertions, 0 deletions
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c index ae0f17c..1dd7baa 100644 --- a/arch/arm/mach-mx3/mach-mx35_3ds.c +++ b/arch/arm/mach-mx3/mach-mx35_3ds.c @@ -38,6 +38,7 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> +#include <mach/mxc_ehci.h> #include "devices-imx35.h" #include "devices.h" @@ -105,6 +106,9 @@ static struct pad_desc mx35pdk_pads[] = { /* USBOTG */ MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, + /* USBH1 */ + MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, + MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, }; /* OTG config */ @@ -113,6 +117,13 @@ static struct fsl_usb2_platform_data usb_otg_pdata = { .phy_mode = FSL_USB2_PHY_UTMI_WIDE, }; +/* USB HOST config */ +static struct mxc_usbh_platform_data usb_host_pdata = { + .portsc = MXC_EHCI_MODE_SERIAL, + .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY, +}; + /* * Board specific initialization. */ @@ -126,6 +137,8 @@ static void __init mxc_board_init(void) mxc_register_device(&mxc_otg_udc_device, &usb_otg_pdata); + mxc_register_device(&mxc_usbh1, &usb_host_pdata); + imx35_add_mxc_nand(&mx35pdk_nand_board_info); } |