diff options
author | Chris Zankel <czankel@tensilica.com> | 2005-06-24 05:01:10 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-06-24 07:05:21 (GMT) |
commit | 8e1a6dd2fddcc73c9e933758361e3d9c076c688a (patch) | |
tree | 30d6c0cdc7f21d1357917517351a1c259f3eba4b /arch/xtensa/Kconfig | |
parent | 48b415ca13bac91f83db3b9d362fd5ae0ce275cb (diff) | |
download | linux-fsl-qoriq-8e1a6dd2fddcc73c9e933758361e3d9c076c688a.tar.xz |
[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 1
The attached patches provides part 1 of an architecture implementation for the
Tensilica Xtensa CPU series.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'arch/xtensa/Kconfig')
-rw-r--r-- | arch/xtensa/Kconfig | 258 |
1 files changed, 258 insertions, 0 deletions
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig new file mode 100644 index 0000000..3e89767 --- /dev/null +++ b/arch/xtensa/Kconfig @@ -0,0 +1,258 @@ +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/config-language.txt. + +mainmenu "Linux/Xtensa Kernel Configuration" + +config FRAME_POINTER + bool + default n + +config XTENSA + bool + default y + help + Xtensa processors are 32-bit RISC machines designed by Tensilica + primarily for embedded systems. These processors are both + configurable and extensible. The Linux port to the Xtensa + architecture supports all processor configurations and extensions, + with reasonable minimum requirements. The Xtensa Linux project has + a home page at <http://xtensa.sourceforge.net/>. + +config UID16 + bool + default n + +config RWSEM_XCHGADD_ALGORITHM + bool + default y + +config HAVE_DEC_LOCK + bool + default y + +config GENERIC_HARDIRQS + bool + default y + +source "init/Kconfig" + +menu "Processor type and features" + +choice + prompt "Xtensa Processor Configuration" + default XTENSA_CPU_LINUX_BE + +config XTENSA_CPU_LINUX_BE + bool "linux_be" + ---help--- + The linux_be processor configuration is the baseline Xtensa + configurations included in this kernel and also used by + binutils, gcc, and gdb. It contains no TIE, no coprocessors, + and the following configuration options: + + Code Density Option 2 Misc Special Registers + NSA/NSAU Instructions 128-bit Data Bus Width + Processor ID 8K, 2-way I and D Caches + Zero-Overhead Loops 2 Inst Address Break Registers + Big Endian 2 Data Address Break Registers + 64 General-Purpose Registers JTAG Interface and Trace Port + 17 Interrupts MMU w/ TLBs and Autorefill + 3 Interrupt Levels 8 Autorefill Ways (I/D TLBs) + 3 Timers Unaligned Exceptions +endchoice + +config MMU + bool + default y + +config XTENSA_UNALIGNED_USER + bool "Unaligned memory access in use space" + ---help--- + The Xtensa architecture currently does not handle unaligned + memory accesses in hardware but through an exception handler. + Per default, unaligned memory accesses are disabled in user space. + + Say Y here to enable unaligned memory access in user space. + +config PREEMPT + bool "Preemptible Kernel" + ---help--- + This option reduces the latency of the kernel when reacting to + real-time or interactive events by allowing a low priority process to + be preempted even if it is in kernel mode executing a system call. + Unfortunately the kernel code has some race conditions if both + CONFIG_SMP and CONFIG_PREEMPT are enabled, so this option is + currently disabled if you are building an SMP kernel. + + Say Y here if you are building a kernel for a desktop, embedded + or real-time system. Say N if you are unsure. + +config MATH_EMULATION + bool "Math emulation" + help + Can we use information of configuration file? + +config HIGHMEM + bool "High memory support" + +endmenu + +menu "Platform options" + +choice + prompt "Xtensa System Type" + default XTENSA_PLATFORM_ISS + +config XTENSA_PLATFORM_ISS + bool "ISS" + help + ISS is an acronym for Tensilica's Instruction Set Simulator. + +config XTENSA_PLATFORM_XT2000 + bool "XT2000" + help + XT2000 is the name of Tensilica's feature-rich emulation platform. + This hardware is capable of running a full Linux distribution. + +endchoice + + +config XTENSA_CALIBRATE_CCOUNT + bool "Auto calibration of the CPU clock rate" + ---help--- + On some platforms (XT2000, for example), the CPU clock rate can + vary. The frequency can be determined, however, by measuring + against a well known, fixed frequency, such as an UART oscillator. + +config XTENSA_CPU_CLOCK + int "CPU clock rate [MHz]" + depends on !XTENSA_CALIBRATE_CCOUNT + default "16" + +config GENERIC_CALIBRATE_DELAY + bool "Auto calibration of the BogoMIPS value" + ---help--- + The BogoMIPS value can easily derived from the CPU frequency. + +config CMDLINE_BOOL + bool "Default bootloader kernel arguments" + +config CMDLINE + string "Initial kernel command string" + depends on CMDLINE_BOOL + default "console=ttyS0,38400 root=/dev/ram" + help + On some architectures (EBSA110 and CATS), there is currently no way + for the boot loader to pass arguments to the kernel. For these + architectures, you should supply some command-line options at build + time by entering them here. As a minimum, you should specify the + memory size and the root device (e.g., mem=64M root=/dev/nfs). + +config SERIAL_CONSOLE + bool + depends on XTENSA_PLATFORM_ISS + default y + +config XTENSA_ISS_NETWORK + bool + depends on XTENSA_PLATFORM_ISS + default y + +endmenu + +menu "Bus options" + +config PCI + bool "PCI support" if !XTENSA_PLATFORM_ISS + depends on !XTENSA_PLATFORM_ISS + default y + help + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside + your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or + VESA. If you have PCI, say Y, otherwise N. + + The PCI-HOWTO, available from + <http://www.linuxdoc.org/docs.html#howto>, contains valuable + information about which PCI hardware does work under Linux and which + doesn't + +source "drivers/pci/Kconfig" + +config HOTPLUG + + bool "Support for hot-pluggable devices" + ---help--- + Say Y here if you want to plug devices into your computer while + the system is running, and be able to use them quickly. In many + cases, the devices can likewise be unplugged at any time too. + + One well known example of this is PCMCIA- or PC-cards, credit-card + size devices such as network cards, modems or hard drives which are + plugged into slots found on all modern laptop computers. Another + example, used on modern desktops as well as laptops, is USB. + + Enable HOTPLUG and KMOD, and build a modular kernel. Get agent + software (at <http://linux-hotplug.sourceforge.net/>) and install it. + Then your kernel will automatically call out to a user mode "policy + agent" (/sbin/hotplug) to load modules and set up software needed + to use devices as you hotplug them. + +source "drivers/pcmcia/Kconfig" + +source "drivers/pci/hotplug/Kconfig" + +endmenu + +menu "Exectuable file formats" + +# only elf supported +config KCORE_ELF + bool + depends on PROC_FS + default y + help + If you enabled support for /proc file system then the file + /proc/kcore will contain the kernel core image in ELF format. This + can be used in gdb: + + $ cd /usr/src/linux ; gdb vmlinux /proc/kcore + + This is especially useful if you have compiled the kernel with the + "-g" option to preserve debugging information. It is mainly used + for examining kernel data structures on the live kernel. + +source "fs/Kconfig.binfmt" + +endmenu + +source "drivers/Kconfig" + +source "fs/Kconfig" + +menu "Xtensa initrd options" + depends on BLK_DEV_INITRD + + config EMBEDDED_RAMDISK + bool "Embed root filesystem ramdisk into the kernel" + +config EMBEDDED_RAMDISK_IMAGE + string "Filename of gziped ramdisk image" + depends on EMBEDDED_RAMDISK + default "ramdisk.gz" + help + This is the filename of the ramdisk image to be built into the + kernel. Relative pathnames are relative to arch/xtensa/boot/ramdisk/. + The ramdisk image is not part of the kernel distribution; you must + provide one yourself. +endmenu + +source "arch/xtensa/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" + + |