diff options
author | Sergei Shtylyov <sshtylyov@ru.mvista.com> | 2010-04-22 16:03:35 (GMT) |
---|---|---|
committer | Jeff Garzik <jgarzik@redhat.com> | 2010-05-14 21:08:02 (GMT) |
commit | 294440887b32c58d220fb54b73b7a58079b78f20 (patch) | |
tree | 83ad03746ca4e7e34fb74cdb2e42b075e085d4da /drivers/ata/libata-sff.c | |
parent | 4f2c774856708bccecb74c0e6296e9e2c9136ee1 (diff) | |
download | linux-fsl-qoriq-294440887b32c58d220fb54b73b7a58079b78f20.tar.xz |
libata-sff: kill unused ata_bus_reset()
... since I see no callers of it.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata/libata-sff.c')
-rw-r--r-- | drivers/ata/libata-sff.c | 94 |
1 files changed, 0 insertions, 94 deletions
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index e3877b6..b313896 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -2631,100 +2631,6 @@ u8 ata_bmdma_status(struct ata_port *ap) } EXPORT_SYMBOL_GPL(ata_bmdma_status); -/** - * ata_bus_reset - reset host port and associated ATA channel - * @ap: port to reset - * - * This is typically the first time we actually start issuing - * commands to the ATA channel. We wait for BSY to clear, then - * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its - * result. Determine what devices, if any, are on the channel - * by looking at the device 0/1 error register. Look at the signature - * stored in each device's taskfile registers, to determine if - * the device is ATA or ATAPI. - * - * LOCKING: - * PCI/etc. bus probe sem. - * Obtains host lock. - * - * SIDE EFFECTS: - * Sets ATA_FLAG_DISABLED if bus reset fails. - * - * DEPRECATED: - * This function is only for drivers which still use old EH and - * will be removed soon. - */ -void ata_bus_reset(struct ata_port *ap) -{ - struct ata_device *device = ap->link.device; - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - u8 err; - unsigned int dev0, dev1 = 0, devmask = 0; - int rc; - - DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no); - - /* determine if device 0/1 are present */ - if (ap->flags & ATA_FLAG_SATA_RESET) - dev0 = 1; - else { - dev0 = ata_devchk(ap, 0); - if (slave_possible) - dev1 = ata_devchk(ap, 1); - } - - if (dev0) - devmask |= (1 << 0); - if (dev1) - devmask |= (1 << 1); - - /* select device 0 again */ - ap->ops->sff_dev_select(ap, 0); - - /* issue bus reset */ - if (ap->flags & ATA_FLAG_SRST) { - rc = ata_bus_softreset(ap, devmask, - ata_deadline(jiffies, 40000)); - if (rc && rc != -ENODEV) - goto err_out; - } - - /* - * determine by signature whether we have ATA or ATAPI devices - */ - device[0].class = ata_sff_dev_classify(&device[0], dev0, &err); - if ((slave_possible) && (err != 0x81)) - device[1].class = ata_sff_dev_classify(&device[1], dev1, &err); - - /* is double-select really necessary? */ - if (device[1].class != ATA_DEV_NONE) - ap->ops->sff_dev_select(ap, 1); - if (device[0].class != ATA_DEV_NONE) - ap->ops->sff_dev_select(ap, 0); - - /* if no devices were detected, disable this port */ - if ((device[0].class == ATA_DEV_NONE) && - (device[1].class == ATA_DEV_NONE)) - goto err_out; - - if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) { - /* set up device control for ATA_FLAG_SATA_RESET */ - iowrite8(ap->ctl, ioaddr->ctl_addr); - ap->last_ctl = ap->ctl; - } - - DPRINTK("EXIT\n"); - return; - -err_out: - ata_port_printk(ap, KERN_ERR, "disabling port\n"); - ata_port_disable(ap); - - DPRINTK("EXIT\n"); -} -EXPORT_SYMBOL_GPL(ata_bus_reset); - #ifdef CONFIG_PCI /** |