diff options
author | Tejun Heo <htejun@gmail.com> | 2007-04-17 14:44:08 (GMT) |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2007-04-28 18:16:06 (GMT) |
commit | 5d728824efeda61d304153bfcf1378a3c18b7d70 (patch) | |
tree | 8a3d4ba0c1c650da5c161f11155e7c19f0fe78aa /drivers/ata/pata_pdc2027x.c | |
parent | 4447d35156169cf136e829eb6b5cac2d6370f2d9 (diff) | |
download | linux-fsl-qoriq-5d728824efeda61d304153bfcf1378a3c18b7d70.tar.xz |
libata: convert the remaining PATA drivers to new init model
Convert pdc_adma, pata_cs5520, pata_isapnp, pata_ixp4xx_cf,
pata_legacy, pata_mpc52xx, pata_mpiix, pata_pcmcia, pata_pdc2027x,
pata_platform, pata_qdi, pata_scc and pata_winbond to new init model.
* init_one()'s now follow more consistent init order
* cs5520 now registers one host with two ports, not two hosts. If any
of the two ports are disabled, it's made dummy as other drivers do.
Tested pdc_adma and pata_legacy. Both are as broken as before. The
rest are compile tested only.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/ata/pata_pdc2027x.c')
-rw-r--r-- | drivers/ata/pata_pdc2027x.c | 98 |
1 files changed, 38 insertions, 60 deletions
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index 8261f4f..a61cbc1 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -171,7 +171,6 @@ static struct ata_port_operations pdc2027x_pata100_ops = { .post_internal_cmd = ata_bmdma_post_internal_cmd, .cable_detect = pdc2027x_cable_detect, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -207,7 +206,6 @@ static struct ata_port_operations pdc2027x_pata133_ops = { .post_internal_cmd = ata_bmdma_post_internal_cmd, .cable_detect = pdc2027x_cable_detect, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -218,7 +216,6 @@ static struct ata_port_operations pdc2027x_pata133_ops = { static struct ata_port_info pdc2027x_port_info[] = { /* PDC_UDMA_100 */ { - .sht = &pdc2027x_sht, .flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO, .pio_mask = 0x1f, /* pio0-4 */ @@ -228,7 +225,6 @@ static struct ata_port_info pdc2027x_port_info[] = { }, /* PDC_UDMA_133 */ { - .sht = &pdc2027x_sht, .flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO, .pio_mask = 0x1f, /* pio0-4 */ @@ -555,12 +551,12 @@ static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc) /** * pdc_read_counter - Read the ctr counter - * @probe_ent: for the port address + * @host: target ATA host */ -static long pdc_read_counter(struct ata_probe_ent *probe_ent) +static long pdc_read_counter(struct ata_host *host) { - void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR]; + void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR]; long counter; int retry = 1; u32 bccrl, bccrh, bccrlv, bccrhv; @@ -598,12 +594,12 @@ retry: * adjust_pll - Adjust the PLL input clock in Hz. * * @pdc_controller: controller specific information - * @probe_ent: For the port address + * @host: target ATA host * @pll_clock: The input of PLL in HZ */ -static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsigned int board_idx) +static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int board_idx) { - void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR]; + void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR]; u16 pll_ctl; long pll_clock_khz = pll_clock / 1000; long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ; @@ -683,19 +679,19 @@ static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsi /** * detect_pll_input_clock - Detect the PLL input clock in Hz. - * @probe_ent: for the port address + * @host: target ATA host * Ex. 16949000 on 33MHz PCI bus for pdc20275. * Half of the PCI clock. */ -static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent) +static long pdc_detect_pll_input_clock(struct ata_host *host) { - void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR]; + void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR]; u32 scr; long start_count, end_count; long pll_clock; /* Read current counter value */ - start_count = pdc_read_counter(probe_ent); + start_count = pdc_read_counter(host); /* Start the test mode */ scr = readl(mmio_base + PDC_SYS_CTL); @@ -707,7 +703,7 @@ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent) mdelay(100); /* Read the counter values again */ - end_count = pdc_read_counter(probe_ent); + end_count = pdc_read_counter(host); /* Stop the test mode */ scr = readl(mmio_base + PDC_SYS_CTL); @@ -726,11 +722,10 @@ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent) /** * pdc_hardware_init - Initialize the hardware. - * @pdev: instance of pci_dev found - * @pdc_controller: controller specific information - * @pe: for the port address + * @host: target ATA host + * @board_idx: board identifier */ -static int pdc_hardware_init(struct pci_dev *pdev, struct ata_probe_ent *pe, unsigned int board_idx) +static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx) { long pll_clock; @@ -740,15 +735,15 @@ static int pdc_hardware_init(struct pci_dev *pdev, struct ata_probe_ent *pe, uns * Ex. 25MHz or 40MHz, we have to adjust the cycle_time. * The pdc20275 controller employs PLL circuit to help correct timing registers setting. */ - pll_clock = pdc_detect_pll_input_clock(pe); + pll_clock = pdc_detect_pll_input_clock(host); if (pll_clock < 0) /* counter overflow? Try again. */ - pll_clock = pdc_detect_pll_input_clock(pe); + pll_clock = pdc_detect_pll_input_clock(host); - dev_printk(KERN_INFO, &pdev->dev, "PLL input clock %ld kHz\n", pll_clock/1000); + dev_printk(KERN_INFO, host->dev, "PLL input clock %ld kHz\n", pll_clock/1000); /* Adjust PLL control register */ - pdc_adjust_pll(pe, pll_clock, board_idx); + pdc_adjust_pll(host, pll_clock, board_idx); return 0; } @@ -780,8 +775,7 @@ static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base) * Called when an instance of PCI adapter is inserted. * This function checks whether the hardware is supported, * initialize hardware and register an instance of ata_host to - * libata by providing struct ata_probe_ent and ata_device_add(). - * (implements struct pci_driver.probe() ) + * libata. (implements struct pci_driver.probe() ) * * @pdev: instance of pci_dev found * @ent: matching entry in the id_tbl[] @@ -790,14 +784,21 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de { static int printed_version; unsigned int board_idx = (unsigned int) ent->driver_data; - - struct ata_probe_ent *probe_ent; + const struct ata_port_info *ppi[] = + { &pdc2027x_port_info[board_idx], NULL }; + struct ata_host *host; void __iomem *mmio_base; int rc; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + /* alloc host */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2); + if (!host) + return -ENOMEM; + + /* acquire resources and fill host */ rc = pcim_enable_device(pdev); if (rc) return rc; @@ -805,6 +806,7 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME); if (rc) return rc; + host->iomap = pcim_iomap_table(pdev); rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); if (rc) @@ -814,46 +816,22 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de if (rc) return rc; - /* Prepare the probe entry */ - probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) - return -ENOMEM; - - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - probe_ent->sht = pdc2027x_port_info[board_idx].sht; - probe_ent->port_flags = pdc2027x_port_info[board_idx].flags; - probe_ent->pio_mask = pdc2027x_port_info[board_idx].pio_mask; - probe_ent->mwdma_mask = pdc2027x_port_info[board_idx].mwdma_mask; - probe_ent->udma_mask = pdc2027x_port_info[board_idx].udma_mask; - probe_ent->port_ops = pdc2027x_port_info[board_idx].port_ops; + mmio_base = host->iomap[PDC_MMIO_BAR]; - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->iomap = pcim_iomap_table(pdev); + pdc_ata_setup_port(&host->ports[0]->ioaddr, mmio_base + 0x17c0); + host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x1000; + pdc_ata_setup_port(&host->ports[1]->ioaddr, mmio_base + 0x15c0); + host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x1008; - mmio_base = probe_ent->iomap[PDC_MMIO_BAR]; - - pdc_ata_setup_port(&probe_ent->port[0], mmio_base + 0x17c0); - probe_ent->port[0].bmdma_addr = mmio_base + 0x1000; - pdc_ata_setup_port(&probe_ent->port[1], mmio_base + 0x15c0); - probe_ent->port[1].bmdma_addr = mmio_base + 0x1008; - - probe_ent->n_ports = 2; - - pci_set_master(pdev); //pci_enable_intx(pdev); /* initialize adapter */ - if (pdc_hardware_init(pdev, probe_ent, board_idx) != 0) + if (pdc_hardware_init(host, board_idx) != 0) return -EIO; - if (!ata_device_add(probe_ent)) - return -ENODEV; - - devm_kfree(&pdev->dev, probe_ent); - return 0; + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED, + &pdc2027x_sht); } /** |