diff options
author | Tejun Heo <tj@kernel.org> | 2010-05-10 19:41:34 (GMT) |
---|---|---|
committer | Jeff Garzik <jgarzik@redhat.com> | 2010-05-19 17:32:19 (GMT) |
commit | c7087652e1890a3feef35b30ee1d4be68e1932cd (patch) | |
tree | 04aeca0f44e87a531d7cb5f894b6790391c2c552 /drivers/ata/pata_via.c | |
parent | 8930ff254a3a80d4477c3391ade07d6dd2a036c7 (diff) | |
download | linux-fsl-qoriq-c7087652e1890a3feef35b30ee1d4be68e1932cd.tar.xz |
libata-sff: clean up BMDMA initialization
When BMDMA initialization failed or BMDMA was not available for
whatever reason, bmdma_addr was left at zero and used as an indication
that BMDMA shouldn't be used. This leads to the following problems.
p1. For BMDMA drivers which don't use traditional BMDMA register,
ata_bmdma_mode_filter() incorrectly inhibits DMA modes. Those
drivers either have to inherit from ata_sff_port_ops or clear
->mode_filter explicitly.
p2. non-BMDMA drivers call into BMDMA PRD table allocation. It
doesn't actually allocate PRD table if bmdma_addr is not
initialized but is still confusing.
p3. For BMDMA drivers which don't use traditional BMDMA register, some
methods might not be invoked as expected (e.g. bmdma_stop from
ata_sff_post_internal_cmd()).
p4. SFF drivers w/ custom DMA interface implement noop BMDMA ops
worrying libata core might call into one of them.
These problems are caused by the muddy line between SFF and BMDMA and
the assumption that all BMDMA controllers initialize bmdma_addr.
This patch fixes p1 and p2 by removing the bmdma_addr assumption and
moving prd allocation to BMDMA port start. Later patches will fix the
remaining issues.
This patch improves BMDMA initialization such that
* When BMDMA register initialization fails, falls back to PIO instead
of failing. ata_pci_bmdma_init() never fails now.
* When ata_pci_bmdma_init() falls back to PIO, it clears
ap->mwdma_mask and udma_mask instead of depending on
ata_bmdma_mode_filter(). This makes ata_bmdma_mode_filter()
unnecessary thus resolving p1.
* ata_port_start() which actually is BMDMA specific is moved to
ata_bmdma_port_start(). ata_port_start() and ata_sff_port_start()
are killed.
* ata_sff_port_start32() is moved and renamed to
ata_bmdma_port_start32().
Drivers which no longer call into PRD table allocation are...
pdc_adma, sata_inic162x, sata_qstor, sata_sx4, pata_cmd640 and all
drivers which inherit from ata_sff_port_ops.
pata_icside sets ->port_start to ATA_OP_NULL as it doesn't need PRD
but is a BMDMA controller and doesn't have custom port_start like
other such controllers.
Note that with the previous patch which makes all and only BMDMA
drivers inherit from ata_bmdma_port_ops, this change doesn't break
drivers which need PRD table.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata/pata_via.c')
-rw-r--r-- | drivers/ata/pata_via.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 87fb89e..7e3e0a5 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -355,7 +355,7 @@ static unsigned long via_mode_filter(struct ata_device *dev, unsigned long mask) mask &= ~ ATA_MASK_UDMA; } } - return ata_bmdma_mode_filter(dev, mask); + return mask; } /** @@ -424,7 +424,7 @@ static int via_port_start(struct ata_port *ap) struct via_port *vp; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - int ret = ata_sff_port_start(ap); + int ret = ata_bmdma_port_start(ap); if (ret < 0) return ret; |