diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/atm/firestream.c | |
download | linux-fsl-qoriq-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/atm/firestream.c')
-rw-r--r-- | drivers/atm/firestream.c | 2053 |
1 files changed, 2053 insertions, 0 deletions
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c new file mode 100644 index 0000000..101f0cc --- /dev/null +++ b/drivers/atm/firestream.c @@ -0,0 +1,2053 @@ + +/* drivers/atm/firestream.c - FireStream 155 (MB86697) and + * FireStream 50 (MB86695) device driver + */ + +/* Written & (C) 2000 by R.E.Wolff@BitWizard.nl + * Copied snippets from zatm.c by Werner Almesberger, EPFL LRC/ICA + * and ambassador.c Copyright (C) 1995-1999 Madge Networks Ltd + */ + +/* + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + The GNU GPL is contained in /usr/doc/copyright/GPL on a Debian + system and in the file COPYING in the Linux kernel source. +*/ + + +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/pci.h> +#include <linux/errno.h> +#include <linux/atm.h> +#include <linux/atmdev.h> +#include <linux/sonet.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#include <linux/delay.h> +#include <linux/ioport.h> /* for request_region */ +#include <linux/uio.h> +#include <linux/init.h> +#include <linux/capability.h> +#include <linux/bitops.h> +#include <asm/byteorder.h> +#include <asm/system.h> +#include <asm/string.h> +#include <asm/io.h> +#include <asm/atomic.h> +#include <asm/uaccess.h> +#include <linux/wait.h> + +#include "firestream.h" + +static int loopback = 0; +static int num=0x5a; + +/* According to measurements (but they look suspicious to me!) done in + * '97, 37% of the packets are one cell in size. So it pays to have + * buffers allocated at that size. A large jump in percentage of + * packets occurs at packets around 536 bytes in length. So it also + * pays to have those pre-allocated. Unfortunately, we can't fully + * take advantage of this as the majority of the packets is likely to + * be TCP/IP (As where obviously the measurement comes from) There the + * link would be opened with say a 1500 byte MTU, and we can't handle + * smaller buffers more efficiently than the larger ones. -- REW + */ + +/* Due to the way Linux memory management works, specifying "576" as + * an allocation size here isn't going to help. They are allocated + * from 1024-byte regions anyway. With the size of the sk_buffs (quite + * large), it doesn't pay to allocate the smallest size (64) -- REW */ + +/* This is all guesswork. Hard numbers to back this up or disprove this, + * are appreciated. -- REW */ + +/* The last entry should be about 64k. However, the "buffer size" is + * passed to the chip in a 16 bit field. I don't know how "65536" + * would be interpreted. -- REW */ + +#define NP FS_NR_FREE_POOLS +static int rx_buf_sizes[NP] = {128, 256, 512, 1024, 2048, 4096, 16384, 65520}; +/* log2: 7 8 9 10 11 12 14 16 */ + +#if 0 +static int rx_pool_sizes[NP] = {1024, 1024, 512, 256, 128, 64, 32, 32}; +#else +/* debug */ +static int rx_pool_sizes[NP] = {128, 128, 128, 64, 64, 64, 32, 32}; +#endif +/* log2: 10 10 9 8 7 6 5 5 */ +/* sumlog2: 17 18 18 18 18 18 19 21 */ +/* mem allocated: 128k 256k 256k 256k 256k 256k 512k 2M */ +/* tot mem: almost 4M */ + +/* NP is shorter, so that it fits on a single line. */ +#undef NP + + +/* Small hardware gotcha: + + The FS50 CAM (VP/VC match registers) always take the lowest channel + number that matches. This is not a problem. + + However, they also ignore whether the channel is enabled or + not. This means that if you allocate channel 0 to 1.2 and then + channel 1 to 0.0, then disabeling channel 0 and writing 0 to the + match channel for channel 0 will "steal" the traffic from channel + 1, even if you correctly disable channel 0. + + Workaround: + + - When disabling channels, write an invalid VP/VC value to the + match register. (We use 0xffffffff, which in the worst case + matches VP/VC = <maxVP>/<maxVC>, but I expect it not to match + anything as some "when not in use, program to 0" bits are now + programmed to 1...) + + - Don't initialize the match registers to 0, as 0.0 is a valid + channel. +*/ + + +/* Optimization hints and tips. + + The FireStream chips are very capable of reducing the amount of + "interrupt-traffic" for the CPU. This driver requests an interrupt on EVERY + action. You could try to minimize this a bit. + + Besides that, the userspace->kernel copy and the PCI bus are the + performance limiting issues for this driver. + + You could queue up a bunch of outgoing packets without telling the + FireStream. I'm not sure that's going to win you much though. The + Linux layer won't tell us in advance when it's not going to give us + any more packets in a while. So this is tricky to implement right without + introducing extra delays. + + -- REW + */ + + + + +/* The strings that define what the RX queue entry is all about. */ +/* Fujitsu: Please tell me which ones can have a pointer to a + freepool descriptor! */ +static char *res_strings[] = { + "RX OK: streaming not EOP", + "RX OK: streaming EOP", + "RX OK: Single buffer packet", + "RX OK: packet mode", + "RX OK: F4 OAM (end to end)", + "RX OK: F4 OAM (Segment)", + "RX OK: F5 OAM (end to end)", + "RX OK: F5 OAM (Segment)", + "RX OK: RM cell", + "RX OK: TRANSP cell", + "RX OK: TRANSPC cell", + "Unmatched cell", + "reserved 12", + "reserved 13", + "reserved 14", + "Unrecognized cell", + "reserved 16", + "reassemby abort: AAL5 abort", + "packet purged", + "packet ageing timeout", + "channel ageing timeout", + "calculated lenght error", + "programmed lenght limit error", + "aal5 crc32 error", + "oam transp or transpc crc10 error", + "reserved 25", + "reserved 26", + "reserved 27", + "reserved 28", + "reserved 29", + "reserved 30", + "reassembly abort: no buffers", + "receive buffer overflow", + "change in GFC", + "receive buffer full", + "low priority discard - no receive descriptor", + "low priority discard - missing end of packet", + "reserved 41", + "reserved 42", + "reserved 43", + "reserved 44", + "reserved 45", + "reserved 46", + "reserved 47", + "reserved 48", + "reserved 49", + "reserved 50", + "reserved 51", + "reserved 52", + "reserved 53", + "reserved 54", + "reserved 55", + "reserved 56", + "reserved 57", + "reserved 58", + "reserved 59", + "reserved 60", + "reserved 61", + "reserved 62", + "reserved 63", +}; + +static char *irq_bitname[] = { + "LPCO", + "DPCO", + "RBRQ0_W", + "RBRQ1_W", + "RBRQ2_W", + "RBRQ3_W", + "RBRQ0_NF", + "RBRQ1_NF", + "RBRQ2_NF", + "RBRQ3_NF", + "BFP_SC", + "INIT", + "INIT_ERR", + "USCEO", + "UPEC0", + "VPFCO", + "CRCCO", + "HECO", + "TBRQ_W", + "TBRQ_NF", + "CTPQ_E", + "GFC_C0", + "PCI_FTL", + "CSQ_W", + "CSQ_NF", + "EXT_INT", + "RXDMA_S" +}; + + +#define PHY_EOF -1 +#define PHY_CLEARALL -2 + +struct reginit_item { + int reg, val; +}; + + +static struct reginit_item PHY_NTC_INIT[] __devinitdata = { + { PHY_CLEARALL, 0x40 }, + { 0x12, 0x0001 }, + { 0x13, 0x7605 }, + { 0x1A, 0x0001 }, + { 0x1B, 0x0005 }, + { 0x38, 0x0003 }, + { 0x39, 0x0006 }, /* changed here to make loopback */ + { 0x01, 0x5262 }, + { 0x15, 0x0213 }, + { 0x00, 0x0003 }, + { PHY_EOF, 0}, /* -1 signals end of list */ +}; + + +/* Safetyfeature: If the card interrupts more than this number of times + in a jiffy (1/100th of a second) then we just disable the interrupt and + print a message. This prevents the system from hanging. + + 150000 packets per second is close to the limit a PC is going to have + anyway. We therefore have to disable this for production. -- REW */ +#undef IRQ_RATE_LIMIT // 100 + +/* Interrupts work now. Unlike serial cards, ATM cards don't work all + that great without interrupts. -- REW */ +#undef FS_POLL_FREQ // 100 + +/* + This driver can spew a whole lot of debugging output at you. If you + need maximum performance, you should disable the DEBUG define. To + aid in debugging in the field, I'm leaving the compile-time debug + features enabled, and disable them "runtime". That allows me to + instruct people with problems to enable debugging without requiring + them to recompile... -- REW +*/ +#define DEBUG + +#ifdef DEBUG +#define fs_dprintk(f, str...) if (fs_debug & f) printk (str) +#else +#define fs_dprintk(f, str...) /* nothing */ +#endif + + +static int fs_keystream = 0; + +#ifdef DEBUG +/* I didn't forget to set this to zero before shipping. Hit me with a stick + if you get this with the debug default not set to zero again. -- REW */ +static int fs_debug = 0; +#else +#define fs_debug 0 +#endif + +#ifdef MODULE +#ifdef DEBUG +module_param(fs_debug, int, 0644); +#endif +module_param(loopback, int, 0); +module_param(num, int, 0); +module_param(fs_keystream, int, 0); +/* XXX Add rx_buf_sizes, and rx_pool_sizes As per request Amar. -- REW */ +#endif + + +#define FS_DEBUG_FLOW 0x00000001 +#define FS_DEBUG_OPEN 0x00000002 +#define FS_DEBUG_QUEUE 0x00000004 +#define FS_DEBUG_IRQ 0x00000008 +#define FS_DEBUG_INIT 0x00000010 +#define FS_DEBUG_SEND 0x00000020 +#define FS_DEBUG_PHY 0x00000040 +#define FS_DEBUG_CLEANUP 0x00000080 +#define FS_DEBUG_QOS 0x00000100 +#define FS_DEBUG_TXQ 0x00000200 +#define FS_DEBUG_ALLOC 0x00000400 +#define FS_DEBUG_TXMEM 0x00000800 +#define FS_DEBUG_QSIZE 0x00001000 + + +#define func_enter() fs_dprintk (FS_DEBUG_FLOW, "fs: enter %s\n", __FUNCTION__) +#define func_exit() fs_dprintk (FS_DEBUG_FLOW, "fs: exit %s\n", __FUNCTION__) + + +static struct fs_dev *fs_boards = NULL; + +#ifdef DEBUG + +static void my_hd (void *addr, int len) +{ + int j, ch; + unsigned char *ptr = addr; + + while (len > 0) { + printk ("%p ", ptr); + for (j=0;j < ((len < 16)?len:16);j++) { + printk ("%02x %s", ptr[j], (j==7)?" ":""); + } + for ( ;j < 16;j++) { + printk (" %s", (j==7)?" ":""); + } + for (j=0;j < ((len < 16)?len:16);j++) { + ch = ptr[j]; + printk ("%c", (ch < 0x20)?'.':((ch > 0x7f)?'.':ch)); + } + printk ("\n"); + ptr += 16; + len -= 16; + } +} +#else /* DEBUG */ +static void my_hd (void *addr, int len){} +#endif /* DEBUG */ + +/********** free an skb (as per ATM device driver documentation) **********/ + +/* Hmm. If this is ATM specific, why isn't there an ATM routine for this? + * I copied it over from the ambassador driver. -- REW */ + +static inline void fs_kfree_skb (struct sk_buff * skb) +{ + if (ATM_SKB(skb)->vcc->pop) + ATM_SKB(skb)->vcc->pop (ATM_SKB(skb)->vcc, skb); + else + dev_kfree_skb_any (skb); +} + + + + +/* It seems the ATM forum recommends this horribly complicated 16bit + * floating point format. Turns out the Ambassador uses the exact same + * encoding. I just copied it over. If Mitch agrees, I'll move it over + * to the atm_misc file or something like that. (and remove it from + * here and the ambassador driver) -- REW + */ + +/* The good thing about this format is that it is monotonic. So, + a conversion routine need not be very complicated. To be able to + round "nearest" we need to take along a few extra bits. Lets + put these after 16 bits, so that we can just return the top 16 + bits of the 32bit number as the result: + + int mr (unsigned int rate, int r) + { + int e = 16+9; + static int round[4]={0, 0, 0xffff, 0x8000}; + if (!rate) return 0; + while (rate & 0xfc000000) { + rate >>= 1; + e++; + } + while (! (rate & 0xfe000000)) { + rate <<= 1; + e--; + } + +// Now the mantissa is in positions bit 16-25. Excepf for the "hidden 1" that's in bit 26. + rate &= ~0x02000000; +// Next add in the exponent + rate |= e << (16+9); +// And perform the rounding: + return (rate + round[r]) >> 16; + } + + 14 lines-of-code. Compare that with the 120 that the Ambassador + guys needed. (would be 8 lines shorter if I'd try to really reduce + the number of lines: + + int mr (unsigned int rate, int r) + { + int e = 16+9; + static int round[4]={0, 0, 0xffff, 0x8000}; + if (!rate) return 0; + for (; rate & 0xfc000000 ;rate >>= 1, e++); + for (;!(rate & 0xfe000000);rate <<= 1, e--); + return ((rate & ~0x02000000) | (e << (16+9)) + round[r]) >> 16; + } + + Exercise for the reader: Remove one more line-of-code, without + cheating. (Just joining two lines is cheating). (I know it's + possible, don't think you've beat me if you found it... If you + manage to lose two lines or more, keep me updated! ;-) + + -- REW */ + + +#define ROUND_UP 1 +#define ROUND_DOWN 2 +#define ROUND_NEAREST 3 +/********** make rate (not quite as much fun as Horizon) **********/ + +static unsigned int make_rate (unsigned int rate, int r, + u16 * bits, unsigned int * actual) +{ + unsigned char exp = -1; /* hush gcc */ + unsigned int man = -1; /* hush gcc */ + + fs_dprintk (FS_DEBUG_QOS, "make_rate %u", rate); + + /* rates in cells per second, ITU format (nasty 16-bit floating-point) + given 5-bit e and 9-bit m: + rate = EITHER (1+m/2^9)*2^e OR 0 + bits = EITHER 1<<14 | e<<9 | m OR 0 + (bit 15 is "reserved", bit 14 "non-zero") + smallest rate is 0 (special representation) + largest rate is (1+511/512)*2^31 = 4290772992 (< 2^32-1) + smallest non-zero rate is (1+0/512)*2^0 = 1 (> 0) + simple algorithm: + find position of top bit, this gives e + remove top bit and shift (rounding if feeling clever) by 9-e + */ + /* Ambassador ucode bug: please don't set bit 14! so 0 rate not + representable. // This should move into the ambassador driver + when properly merged. -- REW */ + + if (rate > 0xffc00000U) { + /* larger than largest representable rate */ + + if (r == ROUND_UP) { + return -EINVAL; + } else { + exp = 31; + man = 511; + } + + } else if (rate) { + /* representable rate */ + + exp = 31; + man = rate; + + /* invariant: rate = man*2^(exp-31) */ + while (!(man & (1<<31))) { + exp = exp - 1; + man = man<<1; + } + + /* man has top bit set + rate = (2^31+(man-2^31))*2^(exp-31) + rate = (1+(man-2^31)/2^31)*2^exp + */ + man = man<<1; + man &= 0xffffffffU; /* a nop on 32-bit systems */ + /* rate = (1+man/2^32)*2^exp + + exp is in the range 0 to 31, man is in the range 0 to 2^32-1 + time to lose significance... we want m in the range 0 to 2^9-1 + rounding presents a minor problem... we first decide which way + we are rounding (based on given rounding direction and possibly + the bits of the mantissa that are to be discarded). + */ + + switch (r) { + case ROUND_DOWN: { + /* just truncate */ + man = man>>(32-9); + break; + } + case ROUND_UP: { + /* check all bits that we are discarding */ + if (man & (-1>>9)) { + man = (man>>(32-9)) + 1; + if (man == (1<<9)) { + /* no need to check for round up outside of range */ + man = 0; + exp += 1; + } + } else { + man = (man>>(32-9)); + } + break; + } + case ROUND_NEAREST: { + /* check msb that we are discarding */ + if (man & (1<<(32-9-1))) { + man = (man>>(32-9)) + 1; + if (man == (1<<9)) { + /* no need to check for round up outside of range */ + man = 0; + exp += 1; + } + } else { + man = (man>>(32-9)); + } + break; + } + } + + } else { + /* zero rate - not representable */ + + if (r == ROUND_DOWN) { + return -EINVAL; + } else { + exp = 0; + man = 0; + } + } + + fs_dprintk (FS_DEBUG_QOS, "rate: man=%u, exp=%hu", man, exp); + + if (bits) + *bits = /* (1<<14) | */ (exp<<9) | man; + + if (actual) + *actual = (exp >= 9) + ? (1 << exp) + (man << (exp-9)) + : (1 << exp) + ((man + (1<<(9-exp-1))) >> (9-exp)); + + return 0; +} + + + + +/* FireStream access routines */ +/* For DEEP-DOWN debugging these can be rigged to intercept accesses to + certain registers or to just log all accesses. */ + +static inline void write_fs (struct fs_dev *dev, int offset, u32 val) +{ + writel (val, dev->base + offset); +} + + +static inline u32 read_fs (struct fs_dev *dev, int offset) +{ + return readl (dev->base + offset); +} + + + +static inline struct FS_QENTRY *get_qentry (struct fs_dev *dev, struct queue *q) +{ + return bus_to_virt (read_fs (dev, Q_WP(q->offset)) & Q_ADDR_MASK); +} + + +static void submit_qentry (struct fs_dev *dev, struct queue *q, struct FS_QENTRY *qe) +{ + u32 wp; + struct FS_QENTRY *cqe; + + /* XXX Sanity check: the write pointer can be checked to be + still the same as the value passed as qe... -- REW */ + /* udelay (5); */ + while ((wp = read_fs (dev, Q_WP (q->offset))) & Q_FULL) { + fs_dprintk (FS_DEBUG_TXQ, "Found queue at %x full. Waiting.\n", + q->offset); + schedule (); + } + + wp &= ~0xf; + cqe = bus_to_virt (wp); + if (qe != cqe) { + fs_dprintk (FS_DEBUG_TXQ, "q mismatch! %p %p\n", qe, cqe); + } + + write_fs (dev, Q_WP(q->offset), Q_INCWRAP); + + { + static int c; + if (!(c++ % 100)) + { + int rp, wp; + rp = read_fs (dev, Q_RP(q->offset)); + wp = read_fs (dev, Q_WP(q->offset)); + fs_dprintk (FS_DEBUG_TXQ, "q at %d: %x-%x: %x entries.\n", + q->offset, rp, wp, wp-rp); + } + } +} + +#ifdef DEBUG_EXTRA +static struct FS_QENTRY pq[60]; +static int qp; + +static struct FS_BPENTRY dq[60]; +static int qd; +static void *da[60]; +#endif + +static void submit_queue (struct fs_dev *dev, struct queue *q, + u32 cmd, u32 p1, u32 p2, u32 p3) +{ + struct FS_QENTRY *qe; + + qe = get_qentry (dev, q); + qe->cmd = cmd; + qe->p0 = p1; + qe->p1 = p2; + qe->p2 = p3; + submit_qentry (dev, q, qe); + +#ifdef DEBUG_EXTRA + pq[qp].cmd = cmd; + pq[qp].p0 = p1; + pq[qp].p1 = p2; + pq[qp].p2 = p3; + qp++; + if (qp >= 60) qp = 0; +#endif +} + +/* Test the "other" way one day... -- REW */ +#if 1 +#define submit_command submit_queue +#else + +static void submit_command (struct fs_dev *dev, struct queue *q, + u32 cmd, u32 p1, u32 p2, u32 p3) +{ + write_fs (dev, CMDR0, cmd); + write_fs (dev, CMDR1, p1); + write_fs (dev, CMDR2, p2); + write_fs (dev, CMDR3, p3); +} +#endif + + + +static void process_return_queue (struct fs_dev *dev, struct queue *q) +{ + long rq; + struct FS_QENTRY *qe; + void *tc; + + while (!((rq = read_fs (dev, Q_RP(q->offset))) & Q_EMPTY)) { + fs_dprintk (FS_DEBUG_QUEUE, "reaping return queue entry at %lx\n", rq); + qe = bus_to_virt (rq); + + fs_dprintk (FS_DEBUG_QUEUE, "queue entry: %08x %08x %08x %08x. (%d)\n", + qe->cmd, qe->p0, qe->p1, qe->p2, STATUS_CODE (qe)); + + switch (STATUS_CODE (qe)) { + case 5: + tc = bus_to_virt (qe->p0); + fs_dprintk (FS_DEBUG_ALLOC, "Free tc: %p\n", tc); + kfree (tc); + break; + } + + write_fs (dev, Q_RP(q->offset), Q_INCWRAP); + } +} + + +static void process_txdone_queue (struct fs_dev *dev, struct queue *q) +{ + long rq; + long tmp; + struct FS_QENTRY *qe; + struct sk_buff *skb; + struct FS_BPENTRY *td; + + while (!((rq = read_fs (dev, Q_RP(q->offset))) & Q_EMPTY)) { + fs_dprintk (FS_DEBUG_QUEUE, "reaping txdone entry at %lx\n", rq); + qe = bus_to_virt (rq); + + fs_dprintk (FS_DEBUG_QUEUE, "queue entry: %08x %08x %08x %08x: %d\n", + qe->cmd, qe->p0, qe->p1, qe->p2, STATUS_CODE (qe)); + + if (STATUS_CODE (qe) != 2) + fs_dprintk (FS_DEBUG_TXMEM, "queue entry: %08x %08x %08x %08x: %d\n", + qe->cmd, qe->p0, qe->p1, qe->p2, STATUS_CODE (qe)); + + + switch (STATUS_CODE (qe)) { + case 0x01: /* This is for AAL0 where we put the chip in streaming mode */ + /* Fall through */ + case 0x02: + /* Process a real txdone entry. */ + tmp = qe->p0; + if (tmp & 0x0f) + printk (KERN_WARNING "td not aligned: %ld\n", tmp); + tmp &= ~0x0f; + td = bus_to_virt (tmp); + + fs_dprintk (FS_DEBUG_QUEUE, "Pool entry: %08x %08x %08x %08x %p.\n", + td->flags, td->next, td->bsa, td->aal_bufsize, td->skb ); + + skb = td->skb; + if (skb == FS_VCC (ATM_SKB(skb)->vcc)->last_skb) { + wake_up_interruptible (& FS_VCC (ATM_SKB(skb)->vcc)->close_wait); + FS_VCC (ATM_SKB(skb)->vcc)->last_skb = NULL; + } + td->dev->ntxpckts--; + + { + static int c=0; + + if (!(c++ % 100)) { + fs_dprintk (FS_DEBUG_QSIZE, "[%d]", td->dev->ntxpckts); + } + } + + atomic_inc(&ATM_SKB(skb)->vcc->stats->tx); + + fs_dprintk (FS_DEBUG_TXMEM, "i"); + fs_dprintk (FS_DEBUG_ALLOC, "Free t-skb: %p\n", skb); + fs_kfree_skb (skb); + + fs_dprintk (FS_DEBUG_ALLOC, "Free trans-d: %p\n", td); + memset (td, 0x12, sizeof (struct FS_BPENTRY)); + kfree (td); + break; + default: + /* Here we get the tx purge inhibit command ... */ + /* Action, I believe, is "don't do anything". -- REW */ + ; + } + + write_fs (dev, Q_RP(q->offset), Q_INCWRAP); + } +} + + +static void process_incoming (struct fs_dev *dev, struct queue *q) +{ + long rq; + struct FS_QENTRY *qe; + struct FS_BPENTRY *pe; + struct sk_buff *skb; + unsigned int channo; + struct atm_vcc *atm_vcc; + + while (!((rq = read_fs (dev, Q_RP(q->offset))) & Q_EMPTY)) { + fs_dprintk (FS_DEBUG_QUEUE, "reaping incoming queue entry at %lx\n", rq); + qe = bus_to_virt (rq); + + fs_dprintk (FS_DEBUG_QUEUE, "queue entry: %08x %08x %08x %08x. ", + qe->cmd, qe->p0, qe->p1, qe->p2); + + fs_dprintk (FS_DEBUG_QUEUE, "-> %x: %s\n", + STATUS_CODE (qe), + res_strings[STATUS_CODE(qe)]); + + pe = bus_to_virt (qe->p0); + fs_dprintk (FS_DEBUG_QUEUE, "Pool entry: %08x %08x %08x %08x %p %p.\n", + pe->flags, pe->next, pe->bsa, pe->aal_bufsize, + pe->skb, pe->fp); + + channo = qe->cmd & 0xffff; + + if (channo < dev->nchannels) + atm_vcc = dev->atm_vccs[channo]; + else + atm_vcc = NULL; + + /* Single buffer packet */ + switch (STATUS_CODE (qe)) { + case 0x1: + /* Fall through for streaming mode */ + case 0x2:/* Packet received OK.... */ + if (atm_vcc) { + skb = pe->skb; + pe->fp->n--; +#if 0 + fs_dprintk (FS_DEBUG_QUEUE, "Got skb: %p\n", skb); + if (FS_DEBUG_QUEUE & fs_debug) my_hd (bus_to_virt (pe->bsa), 0x20); +#endif + skb_put (skb, qe->p1 & 0xffff); + ATM_SKB(skb)->vcc = atm_vcc; + atomic_inc(&atm_vcc->stats->rx); + do_gettimeofday(&skb->stamp); + fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p (pushed)\n", skb); + atm_vcc->push (atm_vcc, skb); + fs_dprintk (FS_DEBUG_ALLOC, "Free rec-d: %p\n", pe); + kfree (pe); + } else { + printk (KERN_ERR "Got a receive on a non-open channel %d.\n", channo); + } + break; + case 0x17:/* AAL 5 CRC32 error. IFF the length field is nonzero, a buffer + has been consumed and needs to be processed. -- REW */ + if (qe->p1 & 0xffff) { + pe = bus_to_virt (qe->p0); + pe->fp->n--; + fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p\n", pe->skb); + dev_kfree_skb_any (pe->skb); + fs_dprintk (FS_DEBUG_ALLOC, "Free rec-d: %p\n", pe); + kfree (pe); + } + if (atm_vcc) + atomic_inc(&atm_vcc->stats->rx_drop); + break; + case 0x1f: /* Reassembly abort: no buffers. */ + /* Silently increment error counter. */ + if (atm_vcc) + atomic_inc(&atm_vcc->stats->rx_drop); + break; + default: /* Hmm. Haven't written the code to handle the others yet... -- REW */ + printk (KERN_WARNING "Don't know what to do with RX status %x: %s.\n", + STATUS_CODE(qe), res_strings[STATUS_CODE (qe)]); + } + write_fs (dev, Q_RP(q->offset), Q_INCWRAP); + } +} + + + +#define DO_DIRECTION(tp) ((tp)->traffic_class != ATM_NONE) + +static int fs_open(struct atm_vcc *atm_vcc) +{ + struct fs_dev *dev; + struct fs_vcc *vcc; + struct fs_transmit_config *tc; + struct atm_trafprm * txtp; + struct atm_trafprm * rxtp; + /* struct fs_receive_config *rc;*/ + /* struct FS_QENTRY *qe; */ + int error; + int bfp; + int to; + unsigned short tmc0; + short vpi = atm_vcc->vpi; + int vci = atm_vcc->vci; + + func_enter (); + + dev = FS_DEV(atm_vcc->dev); + fs_dprintk (FS_DEBUG_OPEN, "fs: open on dev: %p, vcc at %p\n", + dev, atm_vcc); + + if (vci != ATM_VPI_UNSPEC && vpi != ATM_VCI_UNSPEC) + set_bit(ATM_VF_ADDR, &atm_vcc->flags); + + if ((atm_vcc->qos.aal != ATM_AAL5) && + (atm_vcc->qos.aal != ATM_AAL2)) + return -EINVAL; /* XXX AAL0 */ + + fs_dprintk (FS_DEBUG_OPEN, "fs: (itf %d): open %d.%d\n", + atm_vcc->dev->number, atm_vcc->vpi, atm_vcc->vci); + + /* XXX handle qos parameters (rate limiting) ? */ + + vcc = kmalloc(sizeof(struct fs_vcc), GFP_KERNEL); + fs_dprintk (FS_DEBUG_ALLOC, "Alloc VCC: %p(%Zd)\n", vcc, sizeof(struct fs_vcc)); + if (!vcc) { + clear_bit(ATM_VF_ADDR, &atm_vcc->flags); + return -ENOMEM; + } + + atm_vcc->dev_data = vcc; + vcc->last_skb = NULL; + + init_waitqueue_head (&vcc->close_wait); + + txtp = &atm_vcc->qos.txtp; + rxtp = &atm_vcc->qos.rxtp; + + if (!test_bit(ATM_VF_PARTIAL, &atm_vcc->flags)) { + if (IS_FS50(dev)) { + /* Increment the channel numer: take a free one next time. */ + for (to=33;to;to--, dev->channo++) { + /* We only have 32 channels */ + if (dev->channo >= 32) + dev->channo = 0; + /* If we need to do RX, AND the RX is inuse, try the next */ + if (DO_DIRECTION(rxtp) && dev->atm_vccs[dev->channo]) + continue; + /* If we need to do TX, AND the TX is inuse, try the next */ + if (DO_DIRECTION(txtp) && test_bit (dev->channo, dev->tx_inuse)) + continue; + /* Ok, both are free! (or not needed) */ + break; + } + if (!to) { + printk ("No more free channels for FS50..\n"); + return -EBUSY; + } + vcc->channo = dev->channo; + dev->channo &= dev->channel_mask; + + } else { + vcc->channo = (vpi << FS155_VCI_BITS) | (vci); + if (((DO_DIRECTION(rxtp) && dev->atm_vccs[vcc->channo])) || + ( DO_DIRECTION(txtp) && test_bit (vcc->channo, dev->tx_inuse))) { + printk ("Channel is in use for FS155.\n"); + return -EBUSY; + } + } + fs_dprintk (FS_DEBUG_OPEN, "OK. Allocated channel %x(%d).\n", + vcc->channo, vcc->channo); + } + + if (DO_DIRECTION (txtp)) { + tc = kmalloc (sizeof (struct fs_transmit_config), GFP_KERNEL); + fs_dprintk (FS_DEBUG_ALLOC, "Alloc tc: %p(%Zd)\n", + tc, sizeof (struct fs_transmit_config)); + if (!tc) { + fs_dprintk (FS_DEBUG_OPEN, "fs: can't alloc transmit_config.\n"); + return -ENOMEM; + } + + /* Allocate the "open" entry from the high priority txq. This makes + it most likely that the chip will notice it. It also prevents us + from having to wait for completion. On the other hand, we may + need to wait for completion anyway, to see if it completed + succesfully. */ + + switch (atm_vcc->qos.aal) { + case ATM_AAL2: + case ATM_AAL0: + tc->flags = 0 + | TC_FLAGS_TRANSPARENT_PAYLOAD + | TC_FLAGS_PACKET + | (1 << 28) + | TC_FLAGS_TYPE_UBR /* XXX Change to VBR -- PVDL */ + | TC_FLAGS_CAL0; + break; + case ATM_AAL5: + tc->flags = 0 + | TC_FLAGS_AAL5 + | TC_FLAGS_PACKET /* ??? */ + | TC_FLAGS_TYPE_CBR + | TC_FLAGS_CAL0; + break; + default: + printk ("Unknown aal: %d\n", atm_vcc->qos.aal); + tc->flags = 0; + } + /* Docs are vague about this atm_hdr field. By the way, the FS + * chip makes odd errors if lower bits are set.... -- REW */ + tc->atm_hdr = (vpi << 20) | (vci << 4); + { + int pcr = atm_pcr_goal (txtp); + + fs_dprintk (FS_DEBUG_OPEN, "pcr = %d.\n", pcr); + + /* XXX Hmm. officially we're only allowed to do this if rounding + is round_down -- REW */ + if (IS_FS50(dev)) { + if (pcr > 51840000/53/8) pcr = 51840000/53/8; + } else { + if (pcr > 155520000/53/8) pcr = 155520000/53/8; + } + if (!pcr) { + /* no rate cap */ + tmc0 = IS_FS50(dev)?0x61BE:0x64c9; /* Just copied over the bits from Fujitsu -- REW */ + } else { + int r; + if (pcr < 0) { + r = ROUND_DOWN; + pcr = -pcr; + } else { + r = ROUND_UP; + } + error = make_rate (pcr, r, &tmc0, NULL); + } + fs_dprintk (FS_DEBUG_OPEN, "pcr = %d.\n", pcr); + } + + tc->TMC[0] = tmc0 | 0x4000; + tc->TMC[1] = 0; /* Unused */ + tc->TMC[2] = 0; /* Unused */ + tc->TMC[3] = 0; /* Unused */ + + tc->spec = 0; /* UTOPIA address, UDF, HEC: Unused -> 0 */ + tc->rtag[0] = 0; /* What should I do with routing tags??? + -- Not used -- AS -- Thanks -- REW*/ + tc->rtag[1] = 0; + tc->rtag[2] = 0; + + if (fs_debug & FS_DEBUG_OPEN) { + fs_dprintk (FS_DEBUG_OPEN, "TX config record:\n"); + my_hd (tc, sizeof (*tc)); + } + + /* We now use the "submit_command" function to submit commands to + the firestream. There is a define up near the definition of + that routine that switches this routine between immediate write + to the immediate comamnd registers and queuing the commands in + the HPTXQ for execution. This last technique might be more + efficient if we know we're going to submit a whole lot of + commands in one go, but this driver is not setup to be able to + use such a construct. So it probably doen't matter much right + now. -- REW */ + + /* The command is IMMediate and INQueue. The parameters are out-of-line.. */ + submit_command (dev, &dev->hp_txq, + QE_CMD_CONFIG_TX | QE_CMD_IMM_INQ | vcc->channo, + virt_to_bus (tc), 0, 0); + + submit_command (dev, &dev->hp_txq, + QE_CMD_TX_EN | QE_CMD_IMM_INQ | vcc->channo, + 0, 0, 0); + set_bit (vcc->channo, dev->tx_inuse); + } + + if (DO_DIRECTION (rxtp)) { + dev->atm_vccs[vcc->channo] = atm_vcc; + + for (bfp = 0;bfp < FS_NR_FREE_POOLS; bfp++) + if (atm_vcc->qos.rxtp.max_sdu <= dev->rx_fp[bfp].bufsize) break; + if (bfp >= FS_NR_FREE_POOLS) { + fs_dprintk (FS_DEBUG_OPEN, "No free pool fits sdu: %d.\n", + atm_vcc->qos.rxtp.max_sdu); + /* XXX Cleanup? -- Would just calling fs_close work??? -- REW */ + + /* XXX clear tx inuse. Close TX part? */ + dev->atm_vccs[vcc->channo] = NULL; + kfree (vcc); + return -EINVAL; + } + + switch (atm_vcc->qos.aal) { + case ATM_AAL0: + case ATM_AAL2: + submit_command (dev, &dev->hp_txq, + QE_CMD_CONFIG_RX | QE_CMD_IMM_INQ | vcc->channo, + RC_FLAGS_TRANSP | + RC_FLAGS_BFPS_BFP * bfp | + RC_FLAGS_RXBM_PSB, 0, 0); + break; + case ATM_AAL5: + submit_command (dev, &dev->hp_txq, + QE_CMD_CONFIG_RX | QE_CMD_IMM_INQ | vcc->channo, + RC_FLAGS_AAL5 | + RC_FLAGS_BFPS_BFP * bfp | + RC_FLAGS_RXBM_PSB, 0, 0); + break; + }; + if (IS_FS50 (dev)) { + submit_command (dev, &dev->hp_txq, + QE_CMD_REG_WR | QE_CMD_IMM_INQ, + 0x80 + vcc->channo, + (vpi << 16) | vci, 0 ); /* XXX -- Use defines. */ + } + submit_command (dev, &dev->hp_txq, + QE_CMD_RX_EN | QE_CMD_IMM_INQ | vcc->channo, + 0, 0, 0); + } + + /* Indicate we're done! */ + set_bit(ATM_VF_READY, &atm_vcc->flags); + + func_exit (); + return 0; +} + + +static void fs_close(struct atm_vcc *atm_vcc) +{ + struct fs_dev *dev = FS_DEV (atm_vcc->dev); + struct fs_vcc *vcc = FS_VCC (atm_vcc); + struct atm_trafprm * txtp; + struct atm_trafprm * rxtp; + + func_enter (); + + clear_bit(ATM_VF_READY, &atm_vcc->flags); + + fs_dprintk (FS_DEBUG_QSIZE, "--==**[%d]**==--", dev->ntxpckts); + if (vcc->last_skb) { + fs_dprintk (FS_DEBUG_QUEUE, "Waiting for skb %p to be sent.\n", + vcc->last_skb); + /* We're going to wait for the last packet to get sent on this VC. It would + be impolite not to send them don't you think? + XXX + We don't know which packets didn't get sent. So if we get interrupted in + this sleep_on, we'll lose any reference to these packets. Memory leak! + On the other hand, it's awfully convenient that we can abort a "close" that + is taking too long. Maybe just use non-interruptible sleep on? -- REW */ + interruptible_sleep_on (& vcc->close_wait); + } + + txtp = &atm_vcc->qos.txtp; + rxtp = &atm_vcc->qos.rxtp; + + + /* See App note XXX (Unpublished as of now) for the reason for the + removal of the "CMD_IMM_INQ" part of the TX_PURGE_INH... -- REW */ + + if (DO_DIRECTION (txtp)) { + submit_command (dev, &dev->hp_txq, + QE_CMD_TX_PURGE_INH | /*QE_CMD_IMM_INQ|*/ vcc->channo, 0,0,0); + clear_bit (vcc->channo, dev->tx_inuse); + } + + if (DO_DIRECTION (rxtp)) { + submit_command (dev, &dev->hp_txq, + QE_CMD_RX_PURGE_INH | QE_CMD_IMM_INQ | vcc->channo, 0,0,0); + dev->atm_vccs [vcc->channo] = NULL; + + /* This means that this is configured as a receive channel */ + if (IS_FS50 (dev)) { + /* Disable the receive filter. Is 0/0 indeed an invalid receive + channel? -- REW. Yes it is. -- Hang. Ok. I'll use -1 + (0xfff...) -- REW */ + submit_command (dev, &dev->hp_txq, + QE_CMD_REG_WR | QE_CMD_IMM_INQ, + 0x80 + vcc->channo, -1, 0 ); + } + } + + fs_dprintk (FS_DEBUG_ALLOC, "Free vcc: %p\n", vcc); + kfree (vcc); + + func_exit (); +} + + +static int fs_send (struct atm_vcc *atm_vcc, struct sk_buff *skb) +{ + struct fs_dev *dev = FS_DEV (atm_vcc->dev); + struct fs_vcc *vcc = FS_VCC (atm_vcc); + struct FS_BPENTRY *td; + + func_enter (); + + fs_dprintk (FS_DEBUG_TXMEM, "I"); + fs_dprintk (FS_DEBUG_SEND, "Send: atm_vcc %p skb %p vcc %p dev %p\n", + atm_vcc, skb, vcc, dev); + + fs_dprintk (FS_DEBUG_ALLOC, "Alloc t-skb: %p (atm_send)\n", skb); + + ATM_SKB(skb)->vcc = atm_vcc; + + vcc->last_skb = skb; + + td = kmalloc (sizeof (struct FS_BPENTRY), GFP_ATOMIC); + fs_dprintk (FS_DEBUG_ALLOC, "Alloc transd: %p(%Zd)\n", td, sizeof (struct FS_BPENTRY)); + if (!td) { + /* Oops out of mem */ + return -ENOMEM; + } + + fs_dprintk (FS_DEBUG_SEND, "first word in buffer: %x\n", + *(int *) skb->data); + + td->flags = TD_EPI | TD_DATA | skb->len; + td->next = 0; + td->bsa = virt_to_bus (skb->data); + td->skb = skb; + td->dev = dev; + dev->ntxpckts++; + +#ifdef DEBUG_EXTRA + da[qd] = td; + dq[qd].flags = td->flags; + dq[qd].next = td->next; + dq[qd].bsa = td->bsa; + dq[qd].skb = td->skb; + dq[qd].dev = td->dev; + qd++; + if (qd >= 60) qd = 0; +#endif + + submit_queue (dev, &dev->hp_txq, + QE_TRANSMIT_DE | vcc->channo, + virt_to_bus (td), 0, + virt_to_bus (td)); + + fs_dprintk (FS_DEBUG_QUEUE, "in send: txq %d txrq %d\n", + read_fs (dev, Q_EA (dev->hp_txq.offset)) - + read_fs (dev, Q_SA (dev->hp_txq.offset)), + read_fs (dev, Q_EA (dev->tx_relq.offset)) - + read_fs (dev, Q_SA (dev->tx_relq.offset))); + + func_exit (); + return 0; +} + + +/* Some function placeholders for functions we don't yet support. */ + +#if 0 +static int fs_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg) +{ + func_enter (); + func_exit (); + return -ENOIOCTLCMD; +} + + +static int fs_getsockopt(struct atm_vcc *vcc,int level,int optname, + void __user *optval,int optlen) +{ + func_enter (); + func_exit (); + return 0; +} + + +static int fs_setsockopt(struct atm_vcc *vcc,int level,int optname, + void __user *optval,int optlen) +{ + func_enter (); + func_exit (); + return 0; +} + + +static void fs_phy_put(struct atm_dev *dev,unsigned char value, + unsigned long addr) +{ + func_enter (); + func_exit (); +} + + +static unsigned char fs_phy_get(struct atm_dev *dev,unsigned long addr) +{ + func_enter (); + func_exit (); + return 0; +} + + +static int fs_change_qos(struct atm_vcc *vcc,struct atm_qos *qos,int flags) +{ + func_enter (); + func_exit (); + return 0; +}; + +#endif + + +static const struct atmdev_ops ops = { + .open = fs_open, + .close = fs_close, + .send = fs_send, + .owner = THIS_MODULE, + /* ioctl: fs_ioctl, */ + /* getsockopt: fs_getsockopt, */ + /* setsockopt: fs_setsockopt, */ + /* change_qos: fs_change_qos, */ + + /* For now implement these internally here... */ + /* phy_put: fs_phy_put, */ + /* phy_get: fs_phy_get, */ +}; + + +static void __devinit undocumented_pci_fix (struct pci_dev *pdev) +{ + int tint; + + /* The Windows driver says: */ + /* Switch off FireStream Retry Limit Threshold + */ + + /* The register at 0x28 is documented as "reserved", no further + comments. */ + + pci_read_config_dword (pdev, 0x28, &tint); + if (tint != 0x80) { + tint = 0x80; + pci_write_config_dword (pdev, 0x28, tint); + } +} + + + +/************************************************************************** + * PHY routines * + **************************************************************************/ + +static void __devinit write_phy (struct fs_dev *dev, int regnum, int val) +{ + submit_command (dev, &dev->hp_txq, QE_CMD_PRP_WR | QE_CMD_IMM_INQ, + regnum, val, 0); +} + +static int __devinit init_phy (struct fs_dev *dev, struct reginit_item *reginit) +{ + int i; + + func_enter (); + while (reginit->reg != PHY_EOF) { + if (reginit->reg == PHY_CLEARALL) { + /* "PHY_CLEARALL means clear all registers. Numregisters is in "val". */ + for (i=0;i<reginit->val;i++) { + write_phy (dev, i, 0); + } + } else { + write_phy (dev, reginit->reg, reginit->val); + } + reginit++; + } + func_exit (); + return 0; +} + +static void reset_chip (struct fs_dev *dev) +{ + int i; + + write_fs (dev, SARMODE0, SARMODE0_SRTS0); + + /* Undocumented delay */ + udelay (128); + + /* The "internal registers are documented to all reset to zero, but + comments & code in the Windows driver indicates that the pools are + NOT reset. */ + for (i=0;i < FS_NR_FREE_POOLS;i++) { + write_fs (dev, FP_CNF (RXB_FP(i)), 0); + write_fs (dev, FP_SA (RXB_FP(i)), 0); + write_fs (dev, FP_EA (RXB_FP(i)), 0); + write_fs (dev, FP_CNT (RXB_FP(i)), 0); + write_fs (dev, FP_CTU (RXB_FP(i)), 0); + } + + /* The same goes for the match channel registers, although those are + NOT documented that way in the Windows driver. -- REW */ + /* The Windows driver DOES write 0 to these registers somewhere in + the init sequence. However, a small hardware-feature, will + prevent reception of data on VPI/VCI = 0/0 (Unless the channel + allocated happens to have no disabled channels that have a lower + number. -- REW */ + + /* Clear the match channel registers. */ + if (IS_FS50 (dev)) { + for (i=0;i<FS50_NR_CHANNELS;i++) { + write_fs (dev, 0x200 + i * 4, -1); + } + } +} + +static void __devinit *aligned_kmalloc (int size, int flags, int alignment) +{ + void *t; + + if (alignment <= 0x10) { + t = kmalloc (size, flags); + if ((unsigned long)t & (alignment-1)) { + printk ("Kmalloc doesn't align things correctly! %p\n", t); + kfree (t); + return aligned_kmalloc (size, flags, alignment * 4); + } + return t; + } + printk (KERN_ERR "Request for > 0x10 alignment not yet implemented (hard!)\n"); + return NULL; +} + +static int __devinit init_q (struct fs_dev *dev, + struct queue *txq, int queue, int nentries, int is_rq) +{ + int sz = nentries * sizeof (struct FS_QENTRY); + struct FS_QENTRY *p; + + func_enter (); + + fs_dprintk (FS_DEBUG_INIT, "Inititing queue at %x: %d entries:\n", + queue, nentries); + + p = aligned_kmalloc (sz, GFP_KERNEL, 0x10); + fs_dprintk (FS_DEBUG_ALLOC, "Alloc queue: %p(%d)\n", p, sz); + + if (!p) return 0; + + write_fs (dev, Q_SA(queue), virt_to_bus(p)); + write_fs (dev, Q_EA(queue), virt_to_bus(p+nentries-1)); + write_fs (dev, Q_WP(queue), virt_to_bus(p)); + write_fs (dev, Q_RP(queue), virt_to_bus(p)); + if (is_rq) { + /* Configuration for the receive queue: 0: interrupt immediately, + no pre-warning to empty queues: We do our best to keep the + queue filled anyway. */ + write_fs (dev, Q_CNF(queue), 0 ); + } + + txq->sa = p; + txq->ea = p; + txq->offset = queue; + + func_exit (); + return 1; +} + + +static int __devinit init_fp (struct fs_dev *dev, + struct freepool *fp, int queue, int bufsize, int nr_buffers) +{ + func_enter (); + + fs_dprintk (FS_DEBUG_INIT, "Inititing free pool at %x:\n", queue); + + write_fs (dev, FP_CNF(queue), (bufsize * RBFP_RBS) | RBFP_RBSVAL | RBFP_CME); + write_fs (dev, FP_SA(queue), 0); + write_fs (dev, FP_EA(queue), 0); + write_fs (dev, FP_CTU(queue), 0); + write_fs (dev, FP_CNT(queue), 0); + + fp->offset = queue; + fp->bufsize = bufsize; + fp->nr_buffers = nr_buffers; + + func_exit (); + return 1; +} + + +static inline int nr_buffers_in_freepool (struct fs_dev *dev, struct freepool *fp) +{ +#if 0 + /* This seems to be unreliable.... */ + return read_fs (dev, FP_CNT (fp->offset)); +#else + return fp->n; +#endif +} + + +/* Check if this gets going again if a pool ever runs out. -- Yes, it + does. I've seen "receive abort: no buffers" and things started + working again after that... -- REW */ + +static void top_off_fp (struct fs_dev *dev, struct freepool *fp, int gfp_flags) +{ + struct FS_BPENTRY *qe, *ne; + struct sk_buff *skb; + int n = 0; + + fs_dprintk (FS_DEBUG_QUEUE, "Topping off queue at %x (%d-%d/%d)\n", + fp->offset, read_fs (dev, FP_CNT (fp->offset)), fp->n, + fp->nr_buffers); + while (nr_buffers_in_freepool(dev, fp) < fp->nr_buffers) { + + skb = alloc_skb (fp->bufsize, gfp_flags); + fs_dprintk (FS_DEBUG_ALLOC, "Alloc rec-skb: %p(%d)\n", skb, fp->bufsize); + if (!skb) break; + ne = kmalloc (sizeof (struct FS_BPENTRY), gfp_flags); + fs_dprintk (FS_DEBUG_ALLOC, "Alloc rec-d: %p(%Zd)\n", ne, sizeof (struct FS_BPENTRY)); + if (!ne) { + fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p\n", skb); + dev_kfree_skb_any (skb); + break; + } + + fs_dprintk (FS_DEBUG_QUEUE, "Adding skb %p desc %p -> %p(%p) ", + skb, ne, skb->data, skb->head); + n++; + ne->flags = FP_FLAGS_EPI | fp->bufsize; + ne->next = virt_to_bus (NULL); + ne->bsa = virt_to_bus (skb->data); + ne->aal_bufsize = fp->bufsize; + ne->skb = skb; + ne->fp = fp; + + qe = (struct FS_BPENTRY *) (read_fs (dev, FP_EA(fp->offset))); + fs_dprintk (FS_DEBUG_QUEUE, "link at %p\n", qe); + if (qe) { + qe = bus_to_virt ((long) qe); + qe->next = virt_to_bus(ne); + qe->flags &= ~FP_FLAGS_EPI; + } else + write_fs (dev, FP_SA(fp->offset), virt_to_bus(ne)); + + write_fs (dev, FP_EA(fp->offset), virt_to_bus (ne)); + fp->n++; /* XXX Atomic_inc? */ + write_fs (dev, FP_CTU(fp->offset), 1); + } + + fs_dprintk (FS_DEBUG_QUEUE, "Added %d entries. \n", n); +} + +static void __devexit free_queue (struct fs_dev *dev, struct queue *txq) +{ + func_enter (); + + write_fs (dev, Q_SA(txq->offset), 0); + write_fs (dev, Q_EA(txq->offset), 0); + write_fs (dev, Q_RP(txq->offset), 0); + write_fs (dev, Q_WP(txq->offset), 0); + /* Configuration ? */ + + fs_dprintk (FS_DEBUG_ALLOC, "Free queue: %p\n", txq->sa); + kfree (txq->sa); + + func_exit (); +} + +static void __devexit free_freepool (struct fs_dev *dev, struct freepool *fp) +{ + func_enter (); + + write_fs (dev, FP_CNF(fp->offset), 0); + write_fs (dev, FP_SA (fp->offset), 0); + write_fs (dev, FP_EA (fp->offset), 0); + write_fs (dev, FP_CNT(fp->offset), 0); + write_fs (dev, FP_CTU(fp->offset), 0); + + func_exit (); +} + + + +static irqreturn_t fs_irq (int irq, void *dev_id, struct pt_regs * pt_regs) +{ + int i; + u32 status; + struct fs_dev *dev = dev_id; + + status = read_fs (dev, ISR); + if (!status) + return IRQ_NONE; + + func_enter (); + +#ifdef IRQ_RATE_LIMIT + /* Aaargh! I'm ashamed. This costs more lines-of-code than the actual + interrupt routine!. (Well, used to when I wrote that comment) -- REW */ + { + static int lastjif; + static int nintr=0; + + if (lastjif == jiffies) { + if (++nintr > IRQ_RATE_LIMIT) { + free_irq (dev->irq, dev_id); + printk (KERN_ERR "fs: Too many interrupts. Turning off interrupt %d.\n", + dev->irq); + } + } else { + lastjif = jiffies; + nintr = 0; + } + } +#endif + fs_dprintk (FS_DEBUG_QUEUE, "in intr: txq %d txrq %d\n", + read_fs (dev, Q_EA (dev->hp_txq.offset)) - + read_fs (dev, Q_SA (dev->hp_txq.offset)), + read_fs (dev, Q_EA (dev->tx_relq.offset)) - + read_fs (dev, Q_SA (dev->tx_relq.offset))); + + /* print the bits in the ISR register. */ + if (fs_debug & FS_DEBUG_IRQ) { + /* The FS_DEBUG things are unneccesary here. But this way it is + clear for grep that these are debug prints. */ + fs_dprintk (FS_DEBUG_IRQ, "IRQ status:"); + for (i=0;i<27;i++) + if (status & (1 << i)) + fs_dprintk (FS_DEBUG_IRQ, " %s", irq_bitname[i]); + fs_dprintk (FS_DEBUG_IRQ, "\n"); + } + + if (status & ISR_RBRQ0_W) { + fs_dprintk (FS_DEBUG_IRQ, "Iiiin-coming (0)!!!!\n"); + process_incoming (dev, &dev->rx_rq[0]); + /* items mentioned on RBRQ0 are from FP 0 or 1. */ + top_off_fp (dev, &dev->rx_fp[0], GFP_ATOMIC); + top_off_fp (dev, &dev->rx_fp[1], GFP_ATOMIC); + } + + if (status & ISR_RBRQ1_W) { + fs_dprintk (FS_DEBUG_IRQ, "Iiiin-coming (1)!!!!\n"); + process_incoming (dev, &dev->rx_rq[1]); + top_off_fp (dev, &dev->rx_fp[2], GFP_ATOMIC); + top_off_fp (dev, &dev->rx_fp[3], GFP_ATOMIC); + } + + if (status & ISR_RBRQ2_W) { + fs_dprintk (FS_DEBUG_IRQ, "Iiiin-coming (2)!!!!\n"); + process_incoming (dev, &dev->rx_rq[2]); + top_off_fp (dev, &dev->rx_fp[4], GFP_ATOMIC); + top_off_fp (dev, &dev->rx_fp[5], GFP_ATOMIC); + } + + if (status & ISR_RBRQ3_W) { + fs_dprintk (FS_DEBUG_IRQ, "Iiiin-coming (3)!!!!\n"); + process_incoming (dev, &dev->rx_rq[3]); + top_off_fp (dev, &dev->rx_fp[6], GFP_ATOMIC); + top_off_fp (dev, &dev->rx_fp[7], GFP_ATOMIC); + } + + if (status & ISR_CSQ_W) { + fs_dprintk (FS_DEBUG_IRQ, "Command executed ok!\n"); + process_return_queue (dev, &dev->st_q); + } + + if (status & ISR_TBRQ_W) { + fs_dprintk (FS_DEBUG_IRQ, "Data tramsitted!\n"); + process_txdone_queue (dev, &dev->tx_relq); + } + + func_exit (); + return IRQ_HANDLED; +} + + +#ifdef FS_POLL_FREQ +static void fs_poll (unsigned long data) +{ + struct fs_dev *dev = (struct fs_dev *) data; + + fs_irq (0, dev, NULL); + dev->timer.expires = jiffies + FS_POLL_FREQ; + add_timer (&dev->timer); +} +#endif + +static int __devinit fs_init (struct fs_dev *dev) +{ + struct pci_dev *pci_dev; + int isr, to; + int i; + + func_enter (); + pci_dev = dev->pci_dev; + + printk (KERN_INFO "found a FireStream %d card, base %08lx, irq%d.\n", + IS_FS50(dev)?50:155, + pci_resource_start(pci_dev, 0), dev->pci_dev->irq); + + if (fs_debug & FS_DEBUG_INIT) + my_hd ((unsigned char *) dev, sizeof (*dev)); + + undocumented_pci_fix (pci_dev); + + dev->hw_base = pci_resource_start(pci_dev, 0); + + dev->base = ioremap(dev->hw_base, 0x1000); + + reset_chip (dev); + + write_fs (dev, SARMODE0, 0 + | (0 * SARMODE0_SHADEN) /* We don't use shadow registers. */ + | (1 * SARMODE0_INTMODE_READCLEAR) + | (1 * SARMODE0_CWRE) + | IS_FS50(dev)?SARMODE0_PRPWT_FS50_5: + SARMODE0_PRPWT_FS155_3 + | (1 * SARMODE0_CALSUP_1) + | IS_FS50 (dev)?(0 + | SARMODE0_RXVCS_32 + | SARMODE0_ABRVCS_32 + | SARMODE0_TXVCS_32): + (0 + | SARMODE0_RXVCS_1k + | SARMODE0_ABRVCS_1k + | SARMODE0_TXVCS_1k)); + + /* 10ms * 100 is 1 second. That should be enough, as AN3:9 says it takes + 1ms. */ + to = 100; + while (--to) { + isr = read_fs (dev, ISR); + + /* This bit is documented as "RESERVED" */ + if (isr & ISR_INIT_ERR) { + printk (KERN_ERR "Error initializing the FS... \n"); + return 1; + } + if (isr & ISR_INIT) { + fs_dprintk (FS_DEBUG_INIT, "Ha! Initialized OK!\n"); + break; + } + + /* Try again after 10ms. */ + msleep(10); + } + + if (!to) { + printk (KERN_ERR "timeout initializing the FS... \n"); + return 1; + } + + /* XXX fix for fs155 */ + dev->channel_mask = 0x1f; + dev->channo = 0; + + /* AN3: 10 */ + write_fs (dev, SARMODE1, 0 + | (fs_keystream * SARMODE1_DEFHEC) /* XXX PHY */ + | ((loopback == 1) * SARMODE1_TSTLP) /* XXX Loopback mode enable... */ + | (1 * SARMODE1_DCRM) + | (1 * SARMODE1_DCOAM) + | (0 * SARMODE1_OAMCRC) + | (0 * SARMODE1_DUMPE) + | (0 * SARMODE1_GPLEN) + | (0 * SARMODE1_GNAM) + | (0 * SARMODE1_GVAS) + | (0 * SARMODE1_GPAS) + | (1 * SARMODE1_GPRI) + | (0 * SARMODE1_PMS) + | (0 * SARMODE1_GFCR) + | (1 * SARMODE1_HECM2) + | (1 * SARMODE1_HECM1) + | (1 * SARMODE1_HECM0) + | (1 << 12) /* That's what hang's driver does. Program to 0 */ + | (0 * 0xff) /* XXX FS155 */); + + + /* Cal prescale etc */ + + /* AN3: 11 */ + write_fs (dev, TMCONF, 0x0000000f); + write_fs (dev, CALPRESCALE, 0x01010101 * num); + write_fs (dev, 0x80, 0x000F00E4); + + /* AN3: 12 */ + write_fs (dev, CELLOSCONF, 0 + | ( 0 * CELLOSCONF_CEN) + | ( CELLOSCONF_SC1) + | (0x80 * CELLOSCONF_COBS) + | (num * CELLOSCONF_COPK) /* Changed from 0xff to 0x5a */ + | (num * CELLOSCONF_COST));/* after a hint from Hang. + * performance jumped 50->70... */ + + /* Magic value by Hang */ + write_fs (dev, CELLOSCONF_COST, 0x0B809191); + + if (IS_FS50 (dev)) { + write_fs (dev, RAS0, RAS0_DCD_XHLT); + dev->atm_dev->ci_range.vpi_bits = 12; + dev->atm_dev->ci_range.vci_bits = 16; + dev->nchannels = FS50_NR_CHANNELS; + } else { + write_fs (dev, RAS0, RAS0_DCD_XHLT + | (((1 << FS155_VPI_BITS) - 1) * RAS0_VPSEL) + | (((1 << FS155_VCI_BITS) - 1) * RAS0_VCSEL)); + /* We can chose the split arbitarily. We might be able to + support more. Whatever. This should do for now. */ + dev->atm_dev->ci_range.vpi_bits = FS155_VPI_BITS; + dev->atm_dev->ci_range.vci_bits = FS155_VCI_BITS; + + /* Address bits we can't use should be compared to 0. */ + write_fs (dev, RAC, 0); + + /* Manual (AN9, page 6) says ASF1=0 means compare Utopia address + * too. I can't find ASF1 anywhere. Anyway, we AND with just the + * other bits, then compare with 0, which is exactly what we + * want. */ + write_fs (dev, RAM, (1 << (28 - FS155_VPI_BITS - FS155_VCI_BITS)) - 1); + dev->nchannels = FS155_NR_CHANNELS; + } + dev->atm_vccs = kmalloc (dev->nchannels * sizeof (struct atm_vcc *), + GFP_KERNEL); + fs_dprintk (FS_DEBUG_ALLOC, "Alloc atmvccs: %p(%Zd)\n", + dev->atm_vccs, dev->nchannels * sizeof (struct atm_vcc *)); + + if (!dev->atm_vccs) { + printk (KERN_WARNING "Couldn't allocate memory for VCC buffers. Woops!\n"); + /* XXX Clean up..... */ + return 1; + } + memset (dev->atm_vccs, 0, dev->nchannels * sizeof (struct atm_vcc *)); + + dev->tx_inuse = kmalloc (dev->nchannels / 8 /* bits/byte */ , GFP_KERNEL); + fs_dprintk (FS_DEBUG_ALLOC, "Alloc tx_inuse: %p(%d)\n", + dev->atm_vccs, dev->nchannels / 8); + + if (!dev->tx_inuse) { + printk (KERN_WARNING "Couldn't allocate memory for tx_inuse bits!\n"); + /* XXX Clean up..... */ + return 1; + } + memset (dev->tx_inuse, 0, dev->nchannels / 8); + + /* -- RAS1 : FS155 and 50 differ. Default (0) should be OK for both */ + /* -- RAS2 : FS50 only: Default is OK. */ + + /* DMAMODE, default should be OK. -- REW */ + write_fs (dev, DMAMR, DMAMR_TX_MODE_FULL); + + init_q (dev, &dev->hp_txq, TX_PQ(TXQ_HP), TXQ_NENTRIES, 0); + init_q (dev, &dev->lp_txq, TX_PQ(TXQ_LP), TXQ_NENTRIES, 0); + init_q (dev, &dev->tx_relq, TXB_RQ, TXQ_NENTRIES, 1); + init_q (dev, &dev->st_q, ST_Q, TXQ_NENTRIES, 1); + + for (i=0;i < FS_NR_FREE_POOLS;i++) { + init_fp (dev, &dev->rx_fp[i], RXB_FP(i), + rx_buf_sizes[i], rx_pool_sizes[i]); + top_off_fp (dev, &dev->rx_fp[i], GFP_KERNEL); + } + + + for (i=0;i < FS_NR_RX_QUEUES;i++) + init_q (dev, &dev->rx_rq[i], RXB_RQ(i), RXRQ_NENTRIES, 1); + + dev->irq = pci_dev->irq; + if (request_irq (dev->irq, fs_irq, SA_SHIRQ, "firestream", dev)) { + printk (KERN_WARNING "couldn't get irq %d for firestream.\n", pci_dev->irq); + /* XXX undo all previous stuff... */ + return 1; + } + fs_dprintk (FS_DEBUG_INIT, "Grabbed irq %d for dev at %p.\n", dev->irq, dev); + + /* We want to be notified of most things. Just the statistics count + overflows are not interesting */ + write_fs (dev, IMR, 0 + | ISR_RBRQ0_W + | ISR_RBRQ1_W + | ISR_RBRQ2_W + | ISR_RBRQ3_W + | ISR_TBRQ_W + | ISR_CSQ_W); + + write_fs (dev, SARMODE0, 0 + | (0 * SARMODE0_SHADEN) /* We don't use shadow registers. */ + | (1 * SARMODE0_GINT) + | (1 * SARMODE0_INTMODE_READCLEAR) + | (0 * SARMODE0_CWRE) + | (IS_FS50(dev)?SARMODE0_PRPWT_FS50_5: + SARMODE0_PRPWT_FS155_3) + | (1 * SARMODE0_CALSUP_1) + | (IS_FS50 (dev)?(0 + | SARMODE0_RXVCS_32 + | SARMODE0_ABRVCS_32 + | SARMODE0_TXVCS_32): + (0 + | SARMODE0_RXVCS_1k + | SARMODE0_ABRVCS_1k + | SARMODE0_TXVCS_1k)) + | (1 * SARMODE0_RUN)); + + init_phy (dev, PHY_NTC_INIT); + + if (loopback == 2) { + write_phy (dev, 0x39, 0x000e); + } + +#ifdef FS_POLL_FREQ + init_timer (&dev->timer); + dev->timer.data = (unsigned long) dev; + dev->timer.function = fs_poll; + dev->timer.expires = jiffies + FS_POLL_FREQ; + add_timer (&dev->timer); +#endif + + dev->atm_dev->dev_data = dev; + + func_exit (); + return 0; +} + +static int __devinit firestream_init_one (struct pci_dev *pci_dev, + const struct pci_device_id *ent) +{ + struct atm_dev *atm_dev; + struct fs_dev *fs_dev; + + if (pci_enable_device(pci_dev)) + goto err_out; + + fs_dev = kmalloc (sizeof (struct fs_dev), GFP_KERNEL); + fs_dprintk (FS_DEBUG_ALLOC, "Alloc fs-dev: %p(%Zd)\n", + fs_dev, sizeof (struct fs_dev)); + if (!fs_dev) + goto err_out; + + memset (fs_dev, 0, sizeof (struct fs_dev)); + + atm_dev = atm_dev_register("fs", &ops, -1, NULL); + if (!atm_dev) + goto err_out_free_fs_dev; + + fs_dev->pci_dev = pci_dev; + fs_dev->atm_dev = atm_dev; + fs_dev->flags = ent->driver_data; + + if (fs_init(fs_dev)) + goto err_out_free_atm_dev; + + fs_dev->next = fs_boards; + fs_boards = fs_dev; + return 0; + + err_out_free_atm_dev: + atm_dev_deregister(atm_dev); + err_out_free_fs_dev: + kfree(fs_dev); + err_out: + return -ENODEV; +} + +static void __devexit firestream_remove_one (struct pci_dev *pdev) +{ + int i; + struct fs_dev *dev, *nxtdev; + struct fs_vcc *vcc; + struct FS_BPENTRY *fp, *nxt; + + func_enter (); + +#if 0 + printk ("hptxq:\n"); + for (i=0;i<60;i++) { + printk ("%d: %08x %08x %08x %08x \n", + i, pq[qp].cmd, pq[qp].p0, pq[qp].p1, pq[qp].p2); + qp++; + if (qp >= 60) qp = 0; + } + + printk ("descriptors:\n"); + for (i=0;i<60;i++) { + printk ("%d: %p: %08x %08x %p %p\n", + i, da[qd], dq[qd].flags, dq[qd].bsa, dq[qd].skb, dq[qd].dev); + qd++; + if (qd >= 60) qd = 0; + } +#endif + + for (dev = fs_boards;dev != NULL;dev=nxtdev) { + fs_dprintk (FS_DEBUG_CLEANUP, "Releasing resources for dev at %p.\n", dev); + + /* XXX Hit all the tx channels too! */ + + for (i=0;i < dev->nchannels;i++) { + if (dev->atm_vccs[i]) { + vcc = FS_VCC (dev->atm_vccs[i]); + submit_command (dev, &dev->hp_txq, + QE_CMD_TX_PURGE_INH | QE_CMD_IMM_INQ | vcc->channo, 0,0,0); + submit_command (dev, &dev->hp_txq, + QE_CMD_RX_PURGE_INH | QE_CMD_IMM_INQ | vcc->channo, 0,0,0); + + } + } + + /* XXX Wait a while for the chip to release all buffers. */ + + for (i=0;i < FS_NR_FREE_POOLS;i++) { + for (fp=bus_to_virt (read_fs (dev, FP_SA(dev->rx_fp[i].offset))); + !(fp->flags & FP_FLAGS_EPI);fp = nxt) { + fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p\n", fp->skb); + dev_kfree_skb_any (fp->skb); + nxt = bus_to_virt (fp->next); + fs_dprintk (FS_DEBUG_ALLOC, "Free rec-d: %p\n", fp); + kfree (fp); + } + fs_dprintk (FS_DEBUG_ALLOC, "Free rec-skb: %p\n", fp->skb); + dev_kfree_skb_any (fp->skb); + fs_dprintk (FS_DEBUG_ALLOC, "Free rec-d: %p\n", fp); + kfree (fp); + } + + /* Hang the chip in "reset", prevent it clobbering memory that is + no longer ours. */ + reset_chip (dev); + + fs_dprintk (FS_DEBUG_CLEANUP, "Freeing irq%d.\n", dev->irq); + free_irq (dev->irq, dev); + del_timer (&dev->timer); + + atm_dev_deregister(dev->atm_dev); + free_queue (dev, &dev->hp_txq); + free_queue (dev, &dev->lp_txq); + free_queue (dev, &dev->tx_relq); + free_queue (dev, &dev->st_q); + + fs_dprintk (FS_DEBUG_ALLOC, "Free atmvccs: %p\n", dev->atm_vccs); + kfree (dev->atm_vccs); + + for (i=0;i< FS_NR_FREE_POOLS;i++) + free_freepool (dev, &dev->rx_fp[i]); + + for (i=0;i < FS_NR_RX_QUEUES;i++) + free_queue (dev, &dev->rx_rq[i]); + + fs_dprintk (FS_DEBUG_ALLOC, "Free fs-dev: %p\n", dev); + nxtdev = dev->next; + kfree (dev); + } + + func_exit (); +} + +static struct pci_device_id firestream_pci_tbl[] = { + { PCI_VENDOR_ID_FUJITSU_ME, PCI_DEVICE_ID_FUJITSU_FS50, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FS_IS50}, + { PCI_VENDOR_ID_FUJITSU_ME, PCI_DEVICE_ID_FUJITSU_FS155, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, FS_IS155}, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, firestream_pci_tbl); + +static struct pci_driver firestream_driver = { + .name = "firestream", + .id_table = firestream_pci_tbl, + .probe = firestream_init_one, + .remove = __devexit_p(firestream_remove_one), +}; + +static int __init firestream_init_module (void) +{ + int error; + + func_enter (); + error = pci_register_driver(&firestream_driver); + func_exit (); + return error; +} + +static void __exit firestream_cleanup_module(void) +{ + pci_unregister_driver(&firestream_driver); +} + +module_init(firestream_init_module); +module_exit(firestream_cleanup_module); + +MODULE_LICENSE("GPL"); + + + |