diff options
author | Patrick Boettcher <pb@linuxtv.org> | 2009-05-20 08:08:26 (GMT) |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2009-06-16 21:21:09 (GMT) |
commit | d66b94b4aa2f40e134f8c07c58ae74ef3d523ee0 (patch) | |
tree | 697b3a45c678df570ca1be56426c3b4b84874b05 /drivers/media/dvb/b2c2 | |
parent | 302e8acc4137821cd30514da3d91ac109b461c7d (diff) | |
download | linux-fsl-qoriq-d66b94b4aa2f40e134f8c07c58ae74ef3d523ee0.tar.xz |
V4L/DVB (11829): Rewrote frontend-attach mechanism to gain noise-less deactivation of submodules
This patch is reorganizing the frontend-attach mechanism in order to
gain noise-less (superflous prints) deactivation of submodules.
Credits go to Uwe Bugla for helping to clean and test the code.
Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/dvb/b2c2')
-rw-r--r-- | drivers/media/dvb/b2c2/flexcop-common.h | 8 | ||||
-rw-r--r-- | drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 760 |
2 files changed, 413 insertions, 355 deletions
diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h index 3e1c472..9e2148a 100644 --- a/drivers/media/dvb/b2c2/flexcop-common.h +++ b/drivers/media/dvb/b2c2/flexcop-common.h @@ -1,9 +1,7 @@ /* - * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III - * - * flexcop-common.h - common header file for device-specific source files also. - * - * see flexcop.c for copyright information. + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-common.h - common header file for device-specific source files + * see flexcop.c for copyright information */ #ifndef __FLEXCOP_COMMON_H__ #define __FLEXCOP_COMMON_H__ diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c index f7afab5..3f485bf 100644 --- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -1,34 +1,27 @@ /* - * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III - * - * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC. - * - * see flexcop.c for copyright information. + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * flexcop-fe-tuner.c - methods for frontend attachment and DiSEqC controlling + * see flexcop.c for copyright information */ #include <media/tuner.h> - #include "flexcop.h" - -#include "stv0299.h" -#include "mt352.h" -#include "nxt200x.h" -#include "bcm3510.h" -#include "stv0297.h" #include "mt312.h" -#include "lgdt330x.h" -#include "dvb-pll.h" -#include "tuner-simple.h" - +#include "stv0299.h" #include "s5h1420.h" #include "itd1000.h" - -#include "cx24123.h" #include "cx24113.h" - +#include "cx24123.h" #include "isl6421.h" +#include "mt352.h" +#include "bcm3510.h" +#include "nxt200x.h" +#include "dvb-pll.h" +#include "lgdt330x.h" +#include "tuner-simple.h" +#include "stv0297.h" /* lnb control */ - +#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { struct flexcop_device *fc = fe->dvb->priv; @@ -37,65 +30,62 @@ static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage v = fc->read_ibi_reg(fc, misc_204); switch (voltage) { - case SEC_VOLTAGE_OFF: - v.misc_204.ACPI1_sig = 1; - break; - case SEC_VOLTAGE_13: - v.misc_204.ACPI1_sig = 0; - v.misc_204.LNB_L_H_sig = 0; - break; - case SEC_VOLTAGE_18: - v.misc_204.ACPI1_sig = 0; - v.misc_204.LNB_L_H_sig = 1; - break; - default: - err("unknown SEC_VOLTAGE value"); - return -EINVAL; + case SEC_VOLTAGE_OFF: + v.misc_204.ACPI1_sig = 1; + break; + case SEC_VOLTAGE_13: + v.misc_204.ACPI1_sig = 0; + v.misc_204.LNB_L_H_sig = 0; + break; + case SEC_VOLTAGE_18: + v.misc_204.ACPI1_sig = 0; + v.misc_204.LNB_L_H_sig = 1; + break; + default: + err("unknown SEC_VOLTAGE value"); + return -EINVAL; } return fc->write_ibi_reg(fc, misc_204, v); } +#endif +#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \ + || defined(CONFIG_DVB_MT312_MODULE) static int flexcop_sleep(struct dvb_frontend* fe) { struct flexcop_device *fc = fe->dvb->priv; -/* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */ - if (fc->fe_sleep) return fc->fe_sleep(fe); - -/* v.misc_204.ACPI3_sig = 1; - fc->write_ibi_reg(fc,misc_204,v);*/ - return 0; } +#endif +/* SkyStar2 DVB-S rev 2.3 */ +#if defined(CONFIG_DVB_MT312_MODULE) static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) { - /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ +/* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ struct flexcop_device *fc = fe->dvb->priv; flexcop_ibi_value v; u16 ax; v.raw = 0; - deb_tuner("tone = %u\n",tone); switch (tone) { - case SEC_TONE_ON: - ax = 0x01ff; - break; - case SEC_TONE_OFF: - ax = 0; - break; - default: - err("unknown SEC_TONE value"); - return -EINVAL; + case SEC_TONE_ON: + ax = 0x01ff; + break; + case SEC_TONE_OFF: + ax = 0; + break; + default: + err("unknown SEC_TONE value"); + return -EINVAL; } v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */ - v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax; v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax; - return fc->write_ibi_reg(fc,lnb_switch_freq_200,v); } @@ -110,17 +100,16 @@ static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data) static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data) { int i, par = 1, d; - for (i = 7; i >= 0; i--) { d = (data >> i) & 1; par ^= d; flexcop_diseqc_send_bit(fe, d); } - flexcop_diseqc_send_bit(fe, par); } -static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst) +static int flexcop_send_diseqc_msg(struct dvb_frontend *fe, + int len, u8 *msg, unsigned long burst) { int i; @@ -129,7 +118,6 @@ static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, un for (i = 0; i < len; i++) flexcop_diseqc_send_byte(fe,msg[i]); - mdelay(16); if (burst != -1) { @@ -146,50 +134,110 @@ static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, un return 0; } -static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) +static int flexcop_diseqc_send_master_cmd(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *cmd) { return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0); } -static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) +static int flexcop_diseqc_send_burst(struct dvb_frontend *fe, + fe_sec_mini_cmd_t minicmd) { return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd); } -/* dvb-s stv0299 */ -static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio) +static struct mt312_config skystar23_samsung_tbdu18132_config = { + .demod_address = 0x0e, +}; + +static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + u8 buf[4]; + u32 div; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, + .len = sizeof(buf) }; + struct flexcop_device *fc = fe->dvb->priv; + div = (params->frequency + (125/2)) / 125; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = (div >> 0) & 0xff; + buf[2] = 0x84 | ((div >> 10) & 0x60); + buf[3] = 0x80; + + if (params->frequency < 1550000) + buf[3] |= 0x02; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static void skystar2_rev23_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(mt312_attach, + &skystar23_samsung_tbdu18132_config, i2c); + if (fc->fe != NULL) { + struct dvb_frontend_ops *ops = &fc->fe->ops; + ops->tuner_ops.set_params \ + = skystar23_samsung_tbdu18132_tuner_set_params; + ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; + ops->diseqc_send_burst = flexcop_diseqc_send_burst; + ops->set_tone = flexcop_set_tone; + ops->set_voltage = flexcop_set_voltage; + fc->fe_sleep = ops->sleep; + ops->sleep = flexcop_sleep; + fc->dev_type = FC_SKY_REV23; + } +} +#endif + +/* SkyStar2 DVB-S rev 2.6 */ +#if defined(CONFIG_DVB_STV0299_MODULE) +static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe, + u32 srate, u32 ratio) { u8 aclk = 0; u8 bclk = 0; - if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } - else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } - else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } - else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } - else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } - else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } - - stv0299_writereg (fe, 0x13, aclk); - stv0299_writereg (fe, 0x14, bclk); - stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff); - stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff); - stv0299_writereg (fe, 0x21, (ratio ) & 0xf0); + if (srate < 1500000) { + aclk = 0xb7; bclk = 0x47; + } else if (srate < 3000000) { + aclk = 0xb7; bclk = 0x4b; + } else if (srate < 7000000) { + aclk = 0xb7; bclk = 0x4f; + } else if (srate < 14000000) { + aclk = 0xb7; bclk = 0x53; + } else if (srate < 30000000) { + aclk = 0xb6; bclk = 0x53; + } else if (srate < 45000000) { + aclk = 0xb4; bclk = 0x51; + } + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, ratio & 0xf0); return 0; } -static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params) +static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) { u8 buf[4]; u32 div; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; + struct i2c_msg msg = { + .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; struct flexcop_device *fc = fe->dvb->priv; - div = params->frequency / 125; buf[0] = (div >> 8) & 0x7f; buf[1] = div & 0xff; - buf[2] = 0x84; /* 0xC4 */ + buf[2] = 0x84; /* 0xC4 */ buf[3] = 0x08; if (params->frequency < 1500000) @@ -203,48 +251,48 @@ static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dv } static u8 samsung_tbmu24112_inittab[] = { - 0x01, 0x15, - 0x02, 0x30, - 0x03, 0x00, - 0x04, 0x7D, - 0x05, 0x35, - 0x06, 0x02, - 0x07, 0x00, - 0x08, 0xC3, - 0x0C, 0x00, - 0x0D, 0x81, - 0x0E, 0x23, - 0x0F, 0x12, - 0x10, 0x7E, - 0x11, 0x84, - 0x12, 0xB9, - 0x13, 0x88, - 0x14, 0x89, - 0x15, 0xC9, - 0x16, 0x00, - 0x17, 0x5C, - 0x18, 0x00, - 0x19, 0x00, - 0x1A, 0x00, - 0x1C, 0x00, - 0x1D, 0x00, - 0x1E, 0x00, - 0x1F, 0x3A, - 0x20, 0x2E, - 0x21, 0x80, - 0x22, 0xFF, - 0x23, 0xC1, - 0x28, 0x00, - 0x29, 0x1E, - 0x2A, 0x14, - 0x2B, 0x0F, - 0x2C, 0x09, - 0x2D, 0x05, - 0x31, 0x1F, - 0x32, 0x19, - 0x33, 0xFE, - 0x34, 0x93, - 0xff, 0xff, + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7D, + 0x05, 0x35, + 0x06, 0x02, + 0x07, 0x00, + 0x08, 0xC3, + 0x0C, 0x00, + 0x0D, 0x81, + 0x0E, 0x23, + 0x0F, 0x12, + 0x10, 0x7E, + 0x11, 0x84, + 0x12, 0xB9, + 0x13, 0x88, + 0x14, 0x89, + 0x15, 0xC9, + 0x16, 0x00, + 0x17, 0x5C, + 0x18, 0x00, + 0x19, 0x00, + 0x1A, 0x00, + 0x1C, 0x00, + 0x1D, 0x00, + 0x1E, 0x00, + 0x1F, 0x3A, + 0x20, 0x2E, + 0x21, 0x80, + 0x22, 0xFF, + 0x23, 0xC1, + 0x28, 0x00, + 0x29, 0x1E, + 0x2A, 0x14, + 0x2B, 0x0F, + 0x2C, 0x09, + 0x2D, 0x05, + 0x31, 0x1F, + 0x32, 0x19, + 0x33, 0xFE, + 0x34, 0x93, + 0xff, 0xff, }; static struct stv0299_config samsung_tbmu24112_config = { @@ -259,27 +307,136 @@ static struct stv0299_config samsung_tbmu24112_config = { .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, }; -/* dvb-t mt352 */ -static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe) +static void skystar2_rev26_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) { - static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d }; - static u8 mt352_reset [] = { 0x50, 0x80 }; - static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; - static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 }; + fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c); + if (fc->fe != NULL) { + struct dvb_frontend_ops *ops = &fc->fe->ops; + ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params; + ops->set_voltage = flexcop_set_voltage; + fc->fe_sleep = ops->sleep; + ops->sleep = flexcop_sleep; + } +} +#endif + +/* SkyStar2 DVB-S rev 2.7 */ +#if defined(CONFIG_DVB_S5H1420_MODULE) +static struct s5h1420_config skystar2_rev2_7_s5h1420_config = { + .demod_address = 0x53, + .invert = 1, + .repeated_start_workaround = 1, + .serial_mpeg = 1, +}; + +static struct itd1000_config skystar2_rev2_7_itd1000_config = { + .i2c_address = 0x61, +}; + +static void skystar2_rev27_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + /* enable no_base_addr - no repeated start when reading */ + fc->fc_i2c_adap[0].no_base_addr = 1; + fc->fe = dvb_attach(s5h1420_attach, + &skystar2_rev2_7_s5h1420_config, i2c); + if (fc->fe != NULL) { + flexcop_ibi_value r108; + struct i2c_adapter *i2c_tuner \ + = s5h1420_get_tuner_i2c_adapter(fc->fe); + struct dvb_frontend_ops *ops = &fc->fe->ops; + + fc->fe_sleep = ops->sleep; + ops->sleep = flexcop_sleep; + + /* enable no_base_addr - no repeated start when reading */ + fc->fc_i2c_adap[2].no_base_addr = 1; + if (dvb_attach(isl6421_attach, fc->fe, + &fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL) + err("ISL6421 could NOT be attached"); + else + info("ISL6421 successfully attached"); + + /* the ITD1000 requires a lower i2c clock - is it a problem ? */ + r108.raw = 0x00000506; + fc->write_ibi_reg(fc, tw_sm_c_108, r108); + if (i2c_tuner) { + if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner, + &skystar2_rev2_7_itd1000_config) == NULL) + err("ITD1000 could NOT be attached"); + else + info("ITD1000 successfully attached"); + } + } else + fc->fc_i2c_adap[0].no_base_addr = 0; + /* for the next devices we need it again */ +} +#endif + +/* SkyStar2 rev 2.8 */ +#if defined(CONFIG_DVB_CX24123_MODULE) +static struct cx24123_config skystar2_rev2_8_cx24123_config = { + .demod_address = 0x55, + .dont_use_pll = 1, + .agc_callback = cx24113_agc_callback, +}; + +static const struct cx24113_config skystar2_rev2_8_cx24113_config = { + .i2c_addr = 0x54, + .xtal_khz = 10111, +}; + +static void skystar2_rev28_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(cx24123_attach, + &skystar2_rev2_8_cx24123_config, i2c); + if (fc->fe != NULL) { + struct i2c_adapter *i2c_tuner \ + = cx24123_get_tuner_i2c_adapter(fc->fe); + if (i2c_tuner != NULL) { + if (dvb_attach(cx24113_attach, fc->fe, + &skystar2_rev2_8_cx24113_config, + i2c_tuner) == NULL) + err("CX24113 could NOT be attached"); + else + info("CX24113 successfully attached"); + } + + fc->fc_i2c_adap[2].no_base_addr = 1; + if (dvb_attach(isl6421_attach, fc->fe, + &fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL) + err("ISL6421 could NOT be attached"); + else + info("ISL6421 successfully attached"); + /* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an + * IR-receiver (PIC16F818) - but the card has no input for that ??? */ + } +} +#endif + +/* AirStar DVB-T */ +#if defined(CONFIG_DVB_MT352_MODULE) +static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe) +{ + static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d }; + static u8 mt352_reset[] = { 0x50, 0x80 }; + static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 }; + static u8 mt352_agc_cfg[] = { 0x67, 0x28, 0xa1 }; static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); udelay(2000); mt352_write(fe, mt352_reset, sizeof(mt352_reset)); mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); - mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); - return 0; } -static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend* fe, struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len) +static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len) { u32 div; unsigned char bs = 0; @@ -287,19 +444,20 @@ static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend* fe, struct dvb_fro if (buf_len < 5) return -EINVAL; - #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ +#define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6; - - if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09; - if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a; - if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08; + if (params->frequency >= 48000000 && params->frequency <= 154000000) \ + bs = 0x09; + if (params->frequency >= 161000000 && params->frequency <= 439000000) \ + bs = 0x0a; + if (params->frequency >= 447000000 && params->frequency <= 863000000) \ + bs = 0x08; pllbuf[0] = 0x61; pllbuf[1] = div >> 8; pllbuf[2] = div & 0xff; pllbuf[3] = 0xcc; pllbuf[4] = bs; - return 5; } @@ -308,70 +466,88 @@ static struct mt352_config samsung_tdtc9251dh0_config = { .demod_init = samsung_tdtc9251dh0_demod_init, }; -static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) +static void airstar_dvbt_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c); + if (fc->fe != NULL) + fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs; +} +#endif + +/* AirStar ATSC 1st generation */ +#if defined(CONFIG_DVB_BCM3510_MODULE) +static int flexcop_fe_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char* name) { struct flexcop_device *fc = fe->dvb->priv; return request_firmware(fw, name, fc->dev); } -static struct lgdt330x_config air2pc_atsc_hd5000_config = { - .demod_address = 0x59, - .demod_chip = LGDT3303, - .serial_mpeg = 0x04, - .clock_polarity_flip = 1, -}; - -static struct nxt200x_config samsung_tbmv_config = { - .demod_address = 0x0a, -}; - static struct bcm3510_config air2pc_atsc_first_gen_config = { .demod_address = 0x0f, .request_firmware = flexcop_fe_request_firmware, }; -static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params) +static void airstar_atsc1_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) { - u8 buf[4]; - u32 div; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; - struct flexcop_device *fc = fe->dvb->priv; - - div = (params->frequency + (125/2)) / 125; - - buf[0] = (div >> 8) & 0x7f; - buf[1] = (div >> 0) & 0xff; - buf[2] = 0x84 | ((div >> 10) & 0x60); - buf[3] = 0x80; + fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c); +} +#endif - if (params->frequency < 1550000) - buf[3] |= 0x02; +/* AirStar ATSC 2nd generation */ +#if defined(CONFIG_DVB_NXT200X_MODULE) +static struct nxt200x_config samsung_tbmv_config = { + .demod_address = 0x0a, +}; - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&fc->fc_i2c_adap[0].i2c_adap, &msg, 1) != 1) - return -EIO; - return 0; +static void airstar_atsc2_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c); + if (fc->fe != NULL) + dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, + DVB_PLL_SAMSUNG_TBMV); } +#endif -static struct mt312_config skystar23_samsung_tbdu18132_config = { - - .demod_address = 0x0e, +/* AirStar ATSC 3rd generation */ +#if defined(CONFIG_DVB_LGDT330X_MODULE) +static struct lgdt330x_config air2pc_atsc_hd5000_config = { + .demod_address = 0x59, + .demod_chip = LGDT3303, + .serial_mpeg = 0x04, + .clock_polarity_flip = 1, }; +static void airstar_atsc3_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) +{ + fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c); + if (fc->fe != NULL) { + dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61, + TUNER_LG_TDVS_H06XF); + } +} +#endif + +/* CableStar2 DVB-C */ +#if defined(CONFIG_DVB_STV0297_MODULE) static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe, - struct dvb_frontend_parameters *fep) + struct dvb_frontend_parameters *fep) { struct flexcop_device *fc = fe->dvb->priv; u8 buf[4]; u16 div; int ret; -/* 62.5 kHz * 10 */ +/* 62.5 kHz * 10 */ #define REF_FREQ 625 #define FREQ_OFFSET 36125 - div = ((fep->frequency/1000 + FREQ_OFFSET ) * 10) / REF_FREQ; // 4 MHz = 4000 KHz + div = ((fep->frequency/1000 + FREQ_OFFSET) * 10) / REF_FREQ; +/* 4 MHz = 4000 KHz */ buf[0] = (u8)( div >> 8) & 0x7f; buf[1] = (u8) div & 0xff; @@ -384,11 +560,11 @@ static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe, * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 */ buf[2] = 0x95; -// Range(MHz) C1 * RE RTS BS4 BS3 BS2 BS1 Byte 5 -// 47 - 153 0 * 0 0 0 0 0 1 0x01 -// 153 - 430 0 * 0 0 0 0 1 0 0x02 -// 430 - 822 0 * 0 0 1 0 0 0 0x08 -// 822 - 862 1 * 0 0 1 0 0 0 0x88 +/* Range(MHz) C1 * RE RTS BS4 BS3 BS2 BS1 Byte 5 + * 47 - 153 0 * 0 0 0 0 0 1 0x01 + * 153 - 430 0 * 0 0 0 0 1 0 0x02 + * 430 - 822 0 * 0 0 1 0 0 0 0x08 + * 822 - 862 1 * 0 0 1 0 0 0 0x88 */ if (fep->frequency <= 153000000) buf[3] = 0x01; else if (fep->frequency <= 430000000) buf[3] = 0x02; @@ -397,11 +573,11 @@ static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe, if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); - deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n",fep->frequency, buf[0],buf[1],buf[2],buf[3]); + deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n", fep->frequency, + buf[0], buf[1], buf[2], buf[3]); ret = fc->i2c_request(&fc->fc_i2c_adap[2], - FC_WRITE, 0x61, buf[0], &buf[1], 3); + FC_WRITE, 0x61, buf[0], &buf[1], 3); deb_tuner("tuner write returned: %d\n",ret); - return ret; } @@ -481,190 +657,75 @@ static u8 alps_tdee4_stv0297_inittab[] = { static struct stv0297_config alps_tdee4_stv0297_config = { .demod_address = 0x1c, .inittab = alps_tdee4_stv0297_inittab, -// .invert = 1, -// .pll_set = alps_tdee4_stv0297_pll_set, }; - -/* SkyStar2 rev2.7 (a/u) */ -static struct s5h1420_config skystar2_rev2_7_s5h1420_config = { - .demod_address = 0x53, - .invert = 1, - .repeated_start_workaround = 1, - .serial_mpeg = 1, -}; - -static struct itd1000_config skystar2_rev2_7_itd1000_config = { - .i2c_address = 0x61, -}; - -/* SkyStar2 rev2.8 */ -static struct cx24123_config skystar2_rev2_8_cx24123_config = { - .demod_address = 0x55, - .dont_use_pll = 1, - .agc_callback = cx24113_agc_callback, -}; - -static const struct cx24113_config skystar2_rev2_8_cx24113_config = { - .i2c_addr = 0x54, - .xtal_khz = 10111, -}; - -/* try to figure out the frontend, each card/box can have on of the following list */ -int flexcop_frontend_init(struct flexcop_device *fc) +static void cablestar2_attach(struct flexcop_device *fc, + struct i2c_adapter *i2c) { - struct dvb_frontend_ops *ops; - struct i2c_adapter *i2c = &fc->fc_i2c_adap[0].i2c_adap; - struct i2c_adapter *i2c_tuner; - - /* enable no_base_addr - no repeated start when reading */ - fc->fc_i2c_adap[0].no_base_addr = 1; - fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config, i2c); - if (fc->fe != NULL) { - flexcop_ibi_value r108; - i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe); - ops = &fc->fe->ops; - - fc->fe_sleep = ops->sleep; - ops->sleep = flexcop_sleep; - - fc->dev_type = FC_SKY_REV27; - - /* enable no_base_addr - no repeated start when reading */ - fc->fc_i2c_adap[2].no_base_addr = 1; - if (dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, 0x08, 1, 1) == NULL) - err("ISL6421 could NOT be attached"); - else - info("ISL6421 successfully attached"); - - /* the ITD1000 requires a lower i2c clock - it slows down the stuff for everyone - but is it a problem ? */ - r108.raw = 0x00000506; - fc->write_ibi_reg(fc, tw_sm_c_108, r108); - if (i2c_tuner) { - if (dvb_attach(itd1000_attach, fc->fe, i2c_tuner, &skystar2_rev2_7_itd1000_config) == NULL) - err("ITD1000 could NOT be attached"); - else - info("ITD1000 successfully attached"); - } - goto fe_found; - } - fc->fc_i2c_adap[0].no_base_addr = 0; /* for the next devices we need it again */ - - /* try the sky v2.8 (cx24123, isl6421) */ - fc->fe = dvb_attach(cx24123_attach, - &skystar2_rev2_8_cx24123_config, i2c); - if (fc->fe != NULL) { - i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe); - if (i2c_tuner != NULL) { - if (dvb_attach(cx24113_attach, fc->fe, - &skystar2_rev2_8_cx24113_config, - i2c_tuner) == NULL) - err("CX24113 could NOT be attached"); - else - info("CX24113 successfully attached"); - } - - fc->dev_type = FC_SKY_REV28; - - fc->fc_i2c_adap[2].no_base_addr = 1; - if (dvb_attach(isl6421_attach, fc->fe, - &fc->fc_i2c_adap[2].i2c_adap, 0x08, 0, 0) == NULL) - err("ISL6421 could NOT be attached"); - else - info("ISL6421 successfully attached"); - - /* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an - * IR-receiver (PIC16F818) - but the card has no input for - * that ??? */ - - goto fe_found; - } - - /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */ - fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c); - if (fc->fe != NULL) { - ops = &fc->fe->ops; - - ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params; - - ops->set_voltage = flexcop_set_voltage; - - fc->fe_sleep = ops->sleep; - ops->sleep = flexcop_sleep; - - fc->dev_type = FC_SKY_REV26; - goto fe_found; - } - - /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */ - fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c); - if (fc->fe != NULL) { - fc->dev_type = FC_AIR_DVBT; - fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs; - goto fe_found; - } - - /* try the air atsc 2nd generation (nxt2002) */ - fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c); - if (fc->fe != NULL) { - fc->dev_type = FC_AIR_ATSC2; - dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, DVB_PLL_SAMSUNG_TBMV); - goto fe_found; - } - - fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, i2c); - if (fc->fe != NULL) { - fc->dev_type = FC_AIR_ATSC3; - dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61, - TUNER_LG_TDVS_H06XF); - goto fe_found; - } - - /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */ - fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c); - if (fc->fe != NULL) { - fc->dev_type = FC_AIR_ATSC1; - goto fe_found; - } - - /* try the cable dvb (stv0297) */ fc->fc_i2c_adap[0].no_base_addr = 1; fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c); - if (fc->fe != NULL) { - fc->dev_type = FC_CABLE; - fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params; - goto fe_found; - } - fc->fc_i2c_adap[0].no_base_addr = 0; - - /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */ - fc->fe = dvb_attach(mt312_attach, - &skystar23_samsung_tbdu18132_config, i2c); - if (fc->fe != NULL) { - ops = &fc->fe->ops; - - ops->tuner_ops.set_params = skystar23_samsung_tbdu18132_tuner_set_params; - - ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; - ops->diseqc_send_burst = flexcop_diseqc_send_burst; - ops->set_tone = flexcop_set_tone; - ops->set_voltage = flexcop_set_voltage; - - fc->fe_sleep = ops->sleep; - ops->sleep = flexcop_sleep; + if (fc->fe != NULL) + fc->fe->ops.tuner_ops.set_params \ + = alps_tdee4_stv0297_tuner_set_params; + else + fc->fc_i2c_adap[0].no_base_addr = 0; +} +#endif + +static struct { + flexcop_device_type_t type; + void (*attach)(struct flexcop_device *, struct i2c_adapter *); +} flexcop_frontends[] = { +#if defined(CONFIG_DVB_S5H1420_MODULE) + { FC_SKY_REV27, skystar2_rev27_attach }, +#endif +#if defined(CONFIG_DVB_CX24123_MODULE) + { FC_SKY_REV28, skystar2_rev28_attach }, +#endif +#if defined(CONFIG_DVB_STV0299_MODULE) + { FC_SKY_REV26, skystar2_rev26_attach }, +#endif +#if defined(CONFIG_DVB_MT352_MODULE) + { FC_AIR_DVBT, airstar_dvbt_attach }, +#endif +#if defined(CONFIG_DVB_NXT200X_MODULE) + { FC_AIR_ATSC2, airstar_atsc2_attach }, +#endif +#if defined(CONFIG_DVB_LGDT330X_MODULE) + { FC_AIR_ATSC3, airstar_atsc3_attach }, +#endif +#if defined(CONFIG_DVB_BCM3510_MODULE) + { FC_AIR_ATSC1, airstar_atsc1_attach }, +#endif +#if defined(CONFIG_DVB_STV0297_MODULE) + { FC_CABLE, cablestar2_attach }, +#endif +#if defined(CONFIG_DVB_MT312_MODULE) + { FC_SKY_REV23, skystar2_rev23_attach }, +#endif +}; - fc->dev_type = FC_SKY_REV23; - goto fe_found; +/* try to figure out the frontend */ +int flexcop_frontend_init(struct flexcop_device *fc) +{ + int i; + for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) { + /* type needs to be set before, because of some workarounds + * done based on the probed card type */ + fc->dev_type = flexcop_frontends[i].type; + flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap); + if (fc->fe != NULL) + goto fe_found; } - + fc->dev_type = FC_UNK; err("no frontend driver found for this B2C2/FlexCop adapter"); return -ENODEV; fe_found: info("found '%s' .", fc->fe->ops.info.name); if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { + struct dvb_frontend_ops *ops = &fc->fe->ops; err("frontend registration failed!"); - ops = &fc->fe->ops; if (ops->release != NULL) ops->release(fc->fe); fc->fe = NULL; @@ -680,6 +741,5 @@ void flexcop_frontend_exit(struct flexcop_device *fc) dvb_unregister_frontend(fc->fe); dvb_frontend_detach(fc->fe); } - fc->init_state &= ~FC_STATE_FE_INIT; } |