Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd

Pull mtd update from David Woodhouse:
 - More robust parsing especially of xattr data in JFFS2
 - Updates to mxc_nand and gpmi drivers to support new boards and device tree
 - Improve consistency of information about ECC strength in NAND devices
 - Clean up partition handling of plat_nand
 - Support NAND drivers without dedicated access to OOB area
 - BCH hardware ECC support for OMAP
 - Other fixes and cleanups, and a few new device IDs

Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to
added include files next to each other.

* tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits)
  mtd: mxc_nand: move ecc strengh setup before nand_scan_tail
  mtd: block2mtd: fix recursive call of mtd_writev
  mtd: gpmi-nand: define ecc.strength
  mtd: of_parts: fix breakage in Kconfig
  mtd: nand: fix scan_read_raw_oob
  mtd: docg3 fix in-middle of blocks reads
  mtd: cfi_cmdset_0002: Slight cleanup of fixup messages
  mtd: add fixup for S29NS512P NOR flash.
  jffs2: allow to complete xattr integrity check on first GC scan
  jffs2: allow to discriminate between recoverable and non-recoverable errors
  mtd: nand: omap: add support for hardware BCH ecc
  ARM: OMAP3: gpmc: add BCH ecc api and modes
  mtd: nand: check the return code of 'read_oob/read_oob_raw'
  mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'
  mtd: m25p80: Add support for Winbond W25Q80BW
  jffs2: get rid of jffs2_sync_super
  jffs2: remove unnecessary GC pass on sync
  jffs2: remove unnecessary GC pass on umount
  jffs2: remove lock_super
  mtd: gpmi: add gpmi support for mx6q
  ...

4 files changed, 146 insertions, 113 deletions

diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
index 4effb8c..a092451 100644
--- a/drivers/mtd/nand/gpmi-nand/bch-regs.h
+++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
@@ -51,15 +51,26 @@
 
 #define BP_BCH_FLASH0LAYOUT0_ECC0		12
 #define BM_BCH_FLASH0LAYOUT0_ECC0	(0xf << BP_BCH_FLASH0LAYOUT0_ECC0)
-#define BF_BCH_FLASH0LAYOUT0_ECC0(v)		\
-	(((v) << BP_BCH_FLASH0LAYOUT0_ECC0) & BM_BCH_FLASH0LAYOUT0_ECC0)
+#define MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0		11
+#define MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0	(0x1f << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)
+#define BF_BCH_FLASH0LAYOUT0_ECC0(v, x)				\
+	(GPMI_IS_MX6Q(x)					\
+		? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)	\
+			& MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0)	\
+		: (((v) << BP_BCH_FLASH0LAYOUT0_ECC0)		\
+			& BM_BCH_FLASH0LAYOUT0_ECC0)		\
+	)
 
 #define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE		0
 #define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE		\
 			(0xfff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
-#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v)	\
-	(((v) << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)\
-					 & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+#define MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE	\
+			(0x3ff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v, x)				\
+	(GPMI_IS_MX6Q(x)						\
+		? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)	\
+		: ((v) & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE)		\
+	)
 
 #define HW_BCH_FLASH0LAYOUT1			0x00000090
 
@@ -72,13 +83,24 @@
 
 #define BP_BCH_FLASH0LAYOUT1_ECCN		12
 #define BM_BCH_FLASH0LAYOUT1_ECCN	(0xf << BP_BCH_FLASH0LAYOUT1_ECCN)
-#define BF_BCH_FLASH0LAYOUT1_ECCN(v)		\
-	(((v) << BP_BCH_FLASH0LAYOUT1_ECCN) & BM_BCH_FLASH0LAYOUT1_ECCN)
+#define MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN		11
+#define MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN	(0x1f << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)
+#define BF_BCH_FLASH0LAYOUT1_ECCN(v, x)				\
+	(GPMI_IS_MX6Q(x)					\
+		? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)	\
+			& MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN)	\
+		: (((v) << BP_BCH_FLASH0LAYOUT1_ECCN)		\
+			& BM_BCH_FLASH0LAYOUT1_ECCN)		\
+	)
 
 #define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE		0
 #define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE		\
 			(0xfff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
-#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v)	\
-	(((v) << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
-					 & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#define MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE	\
+			(0x3ff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v, x)				\
+	(GPMI_IS_MX6Q(x)						\
+		? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)	\
+		: ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE)		\
+	)
 #endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index e8ea710..a1f4332 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -21,7 +21,6 @@
 #include <linux/mtd/gpmi-nand.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
-#include <mach/mxs.h>
 
 #include "gpmi-nand.h"
 #include "gpmi-regs.h"
@@ -37,6 +36,8 @@ struct timing_threshod timing_default_threshold = {
 	.max_dll_delay_in_ns         = 16,
 };
 
+#define MXS_SET_ADDR		0x4
+#define MXS_CLR_ADDR		0x8
 /*
  * Clear the bit and poll it cleared.  This is usually called with
  * a reset address and mask being either SFTRST(bit 31) or CLKGATE
@@ -47,7 +48,7 @@ static int clear_poll_bit(void __iomem *addr, u32 mask)
 	int timeout = 0x400;
 
 	/* clear the bit */
-	__mxs_clrl(mask, addr);
+	writel(mask, addr + MXS_CLR_ADDR);
 
 	/*
 	 * SFTRST needs 3 GPMI clocks to settle, the reference manual
@@ -92,11 +93,11 @@ static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable)
 		goto error;
 
 	/* clear CLKGATE */
-	__mxs_clrl(MODULE_CLKGATE, reset_addr);
+	writel(MODULE_CLKGATE, reset_addr + MXS_CLR_ADDR);
 
 	if (!just_enable) {
 		/* set SFTRST to reset the block */
-		__mxs_setl(MODULE_SFTRST, reset_addr);
+		writel(MODULE_SFTRST, reset_addr + MXS_SET_ADDR);
 		udelay(1);
 
 		/* poll CLKGATE becoming set */
@@ -223,13 +224,13 @@ int bch_set_geometry(struct gpmi_nand_data *this)
 	/* Configure layout 0. */
 	writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count)
 			| BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size)
-			| BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength)
-			| BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size),
+			| BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this)
+			| BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size, this),
 			r->bch_regs + HW_BCH_FLASH0LAYOUT0);
 
 	writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size)
-			| BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength)
-			| BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size),
+			| BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this)
+			| BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this),
 			r->bch_regs + HW_BCH_FLASH0LAYOUT1);
 
 	/* Set *all* chip selects to use layout 0. */
@@ -255,11 +256,12 @@ static unsigned int ns_to_cycles(unsigned int time,
 	return max(k, min);
 }
 
+#define DEF_MIN_PROP_DELAY	5
+#define DEF_MAX_PROP_DELAY	9
 /* Apply timing to current hardware conditions. */
 static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
 					struct gpmi_nfc_hardware_timing *hw)
 {
-	struct gpmi_nand_platform_data *pdata = this->pdata;
 	struct timing_threshod *nfc = &timing_default_threshold;
 	struct nand_chip *nand = &this->nand;
 	struct nand_timing target = this->timing;
@@ -276,8 +278,8 @@ static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
 	int ideal_sample_delay_in_ns;
 	unsigned int sample_delay_factor;
 	int tEYE;
-	unsigned int min_prop_delay_in_ns = pdata->min_prop_delay_in_ns;
-	unsigned int max_prop_delay_in_ns = pdata->max_prop_delay_in_ns;
+	unsigned int min_prop_delay_in_ns = DEF_MIN_PROP_DELAY;
+	unsigned int max_prop_delay_in_ns = DEF_MAX_PROP_DELAY;
 
 	/*
 	 * If there are multiple chips, we need to relax the timings to allow
@@ -803,7 +805,8 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
 	if (GPMI_IS_MX23(this)) {
 		mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
 		reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
-	} else if (GPMI_IS_MX28(this)) {
+	} else if (GPMI_IS_MX28(this) || GPMI_IS_MX6Q(this)) {
+		/* MX28 shares the same R/B register as MX6Q. */
 		mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip);
 		reg = readl(r->gpmi_regs + HW_GPMI_STAT);
 	} else
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index b68e043..a05b7b4 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -25,6 +25,8 @@
 #include <linux/mtd/gpmi-nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include "gpmi-nand.h"
 
 /* add our owner bbt descriptor */
@@ -387,7 +389,7 @@ static void release_bch_irq(struct gpmi_nand_data *this)
 static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
 {
 	struct gpmi_nand_data *this = param;
-	struct resource *r = this->private;
+	int dma_channel = (int)this->private;
 
 	if (!mxs_dma_is_apbh(chan))
 		return false;
@@ -399,7 +401,7 @@ static bool gpmi_dma_filter(struct dma_chan *chan, void *param)
 	 *	for mx28 :	MX28_DMA_GPMI0 ~ MX28_DMA_GPMI7
 	 *		(These eight channels share the same IRQ!)
 	 */
-	if (r->start <= chan->chan_id && chan->chan_id <= r->end) {
+	if (dma_channel == chan->chan_id) {
 		chan->private = &this->dma_data;
 		return true;
 	}
@@ -419,57 +421,45 @@ static void release_dma_channels(struct gpmi_nand_data *this)
 static int __devinit acquire_dma_channels(struct gpmi_nand_data *this)
 {
 	struct platform_device *pdev = this->pdev;
-	struct gpmi_nand_platform_data *pdata = this->pdata;
-	struct resources *res = &this->resources;
-	struct resource *r, *r_dma;
-	unsigned int i;
+	struct resource *r_dma;
+	struct device_node *dn;
+	int dma_channel;
+	unsigned int ret;
+	struct dma_chan *dma_chan;
+	dma_cap_mask_t mask;
+
+	/* dma channel, we only use the first one. */
+	dn = pdev->dev.of_node;
+	ret = of_property_read_u32(dn, "fsl,gpmi-dma-channel", &dma_channel);
+	if (ret) {
+		pr_err("unable to get DMA channel from dt.\n");
+		goto acquire_err;
+	}
+	this->private = (void *)dma_channel;
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_DMA,
-					GPMI_NAND_DMA_CHANNELS_RES_NAME);
+	/* gpmi dma interrupt */
 	r_dma = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
 					GPMI_NAND_DMA_INTERRUPT_RES_NAME);
-	if (!r || !r_dma) {
+	if (!r_dma) {
 		pr_err("Can't get resource for DMA\n");
-		return -ENXIO;
+		goto acquire_err;
 	}
+	this->dma_data.chan_irq = r_dma->start;
 
-	/* used in gpmi_dma_filter() */
-	this->private = r;
-
-	for (i = r->start; i <= r->end; i++) {
-		struct dma_chan *dma_chan;
-		dma_cap_mask_t mask;
+	/* request dma channel */
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
 
-		if (i - r->start >= pdata->max_chip_count)
-			break;
-
-		dma_cap_zero(mask);
-		dma_cap_set(DMA_SLAVE, mask);
-
-		/* get the DMA interrupt */
-		if (r_dma->start == r_dma->end) {
-			/* only register the first. */
-			if (i == r->start)
-				this->dma_data.chan_irq = r_dma->start;
-			else
-				this->dma_data.chan_irq = NO_IRQ;
-		} else
-			this->dma_data.chan_irq = r_dma->start + (i - r->start);
-
-		dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
-		if (!dma_chan)
-			goto acquire_err;
-
-		/* fill the first empty item */
-		this->dma_chans[i - r->start] = dma_chan;
+	dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
+	if (!dma_chan) {
+		pr_err("dma_request_channel failed.\n");
+		goto acquire_err;
 	}
 
-	res->dma_low_channel = r->start;
-	res->dma_high_channel = i;
+	this->dma_chans[0] = dma_chan;
 	return 0;
 
 acquire_err:
-	pr_err("Can't acquire DMA channel %u\n", i);
 	release_dma_channels(this);
 	return -EINVAL;
 }
@@ -851,7 +841,7 @@ static void block_mark_swapping(struct gpmi_nand_data *this,
 }
 
 static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
-				uint8_t *buf, int page)
+				uint8_t *buf, int oob_required, int page)
 {
 	struct gpmi_nand_data *this = chip->priv;
 	struct bch_geometry *nfc_geo = &this->bch_geometry;
@@ -917,28 +907,31 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 		mtd->ecc_stats.corrected += corrected;
 	}
 
-	/*
-	 * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob() for
-	 * details about our policy for delivering the OOB.
-	 *
-	 * We fill the caller's buffer with set bits, and then copy the block
-	 * mark to th caller's buffer. Note that, if block mark swapping was
-	 * necessary, it has already been done, so we can rely on the first
-	 * byte of the auxiliary buffer to contain the block mark.
-	 */
-	memset(chip->oob_poi, ~0, mtd->oobsize);
-	chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
+	if (oob_required) {
+		/*
+		 * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob()
+		 * for details about our policy for delivering the OOB.
+		 *
+		 * We fill the caller's buffer with set bits, and then copy the
+		 * block mark to th caller's buffer. Note that, if block mark
+		 * swapping was necessary, it has already been done, so we can
+		 * rely on the first byte of the auxiliary buffer to contain
+		 * the block mark.
+		 */
+		memset(chip->oob_poi, ~0, mtd->oobsize);
+		chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
 
-	read_page_swap_end(this, buf, mtd->writesize,
-			this->payload_virt, this->payload_phys,
-			nfc_geo->payload_size,
-			payload_virt, payload_phys);
+		read_page_swap_end(this, buf, mtd->writesize,
+				this->payload_virt, this->payload_phys,
+				nfc_geo->payload_size,
+				payload_virt, payload_phys);
+	}
 exit_nfc:
 	return ret;
 }
 
-static void gpmi_ecc_write_page(struct mtd_info *mtd,
-				struct nand_chip *chip, const uint8_t *buf)
+static void gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+				const uint8_t *buf, int oob_required)
 {
 	struct gpmi_nand_data *this = chip->priv;
 	struct bch_geometry *nfc_geo = &this->bch_geometry;
@@ -1077,7 +1070,7 @@ exit_auxiliary:
  * this driver.
  */
 static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
-				int page, int sndcmd)
+				int page)
 {
 	struct gpmi_nand_data *this = chip->priv;
 
@@ -1100,11 +1093,7 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
 		chip->oob_poi[0] = chip->read_byte(mtd);
 	}
 
-	/*
-	 * Return true, indicating that the next call to this function must send
-	 * a command.
-	 */
-	return true;
+	return 0;
 }
 
 static int
@@ -1318,7 +1307,7 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this)
 		/* Write the first page of the current stride. */
 		dev_dbg(dev, "Writing an NCB fingerprint in page 0x%x\n", page);
 		chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
-		chip->ecc.write_page_raw(mtd, chip, buffer);
+		chip->ecc.write_page_raw(mtd, chip, buffer, 0);
 		chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
 
 		/* Wait for the write to finish. */
@@ -1444,6 +1433,10 @@ static int gpmi_pre_bbt_scan(struct gpmi_nand_data  *this)
 	if (ret)
 		return ret;
 
+	/* Adjust the ECC strength according to the chip. */
+	this->nand.ecc.strength = this->bch_geometry.ecc_strength;
+	this->mtd.ecc_strength = this->bch_geometry.ecc_strength;
+
 	/* NAND boot init, depends on the gpmi_set_geometry(). */
 	return nand_boot_init(this);
 }
@@ -1471,9 +1464,9 @@ void gpmi_nfc_exit(struct gpmi_nand_data *this)
 
 static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
 {
-	struct gpmi_nand_platform_data *pdata = this->pdata;
 	struct mtd_info  *mtd = &this->mtd;
 	struct nand_chip *chip = &this->nand;
+	struct mtd_part_parser_data ppdata = {};
 	int ret;
 
 	/* init current chip */
@@ -1502,6 +1495,7 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
 	chip->options		|= NAND_NO_SUBPAGE_WRITE;
 	chip->ecc.mode		= NAND_ECC_HW;
 	chip->ecc.size		= 1;
+	chip->ecc.strength	= 8;
 	chip->ecc.layout	= &gpmi_hw_ecclayout;
 
 	/* Allocate a temporary DMA buffer for reading ID in the nand_scan() */
@@ -1511,14 +1505,14 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
 	if (ret)
 		goto err_out;
 
-	ret = nand_scan(mtd, pdata->max_chip_count);
+	ret = nand_scan(mtd, 1);
 	if (ret) {
 		pr_err("Chip scan failed\n");
 		goto err_out;
 	}
 
-	ret = mtd_device_parse_register(mtd, NULL, NULL,
-			pdata->partitions, pdata->partition_count);
+	ppdata.of_node = this->pdev->dev.of_node;
+	ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
 	if (ret)
 		goto err_out;
 	return 0;
@@ -1528,12 +1522,41 @@ err_out:
 	return ret;
 }
 
+static const struct platform_device_id gpmi_ids[] = {
+	{ .name = "imx23-gpmi-nand", .driver_data = IS_MX23, },
+	{ .name = "imx28-gpmi-nand", .driver_data = IS_MX28, },
+	{ .name = "imx6q-gpmi-nand", .driver_data = IS_MX6Q, },
+	{},
+};
+
+static const struct of_device_id gpmi_nand_id_table[] = {
+	{
+		.compatible = "fsl,imx23-gpmi-nand",
+		.data = (void *)&gpmi_ids[IS_MX23]
+	}, {
+		.compatible = "fsl,imx28-gpmi-nand",
+		.data = (void *)&gpmi_ids[IS_MX28]
+	}, {
+		.compatible = "fsl,imx6q-gpmi-nand",
+		.data = (void *)&gpmi_ids[IS_MX6Q]
+	}, {}
+};
+MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
+
 static int __devinit gpmi_nand_probe(struct platform_device *pdev)
 {
-	struct gpmi_nand_platform_data *pdata = pdev->dev.platform_data;
 	struct gpmi_nand_data *this;
+	const struct of_device_id *of_id;
 	int ret;
 
+	of_id = of_match_device(gpmi_nand_id_table, &pdev->dev);
+	if (of_id) {
+		pdev->id_entry = of_id->data;
+	} else {
+		pr_err("Failed to find the right device id.\n");
+		return -ENOMEM;
+	}
+
 	this = kzalloc(sizeof(*this), GFP_KERNEL);
 	if (!this) {
 		pr_err("Failed to allocate per-device memory\n");
@@ -1543,13 +1566,6 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, this);
 	this->pdev  = pdev;
 	this->dev   = &pdev->dev;
-	this->pdata = pdata;
-
-	if (pdata->platform_init) {
-		ret = pdata->platform_init();
-		if (ret)
-			goto platform_init_error;
-	}
 
 	ret = acquire_resources(this);
 	if (ret)
@@ -1567,7 +1583,6 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev)
 
 exit_nfc_init:
 	release_resources(this);
-platform_init_error:
 exit_acquire_resources:
 	platform_set_drvdata(pdev, NULL);
 	kfree(this);
@@ -1585,19 +1600,10 @@ static int __exit gpmi_nand_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct platform_device_id gpmi_ids[] = {
-	{
-		.name = "imx23-gpmi-nand",
-		.driver_data = IS_MX23,
-	}, {
-		.name = "imx28-gpmi-nand",
-		.driver_data = IS_MX28,
-	}, {},
-};
-
 static struct platform_driver gpmi_nand_driver = {
 	.driver = {
 		.name = "gpmi-nand",
+		.of_match_table = gpmi_nand_id_table,
 	},
 	.probe   = gpmi_nand_probe,
 	.remove  = __exit_p(gpmi_nand_remove),
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index ec6180d..ce5daa1 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -266,8 +266,10 @@ extern int gpmi_read_page(struct gpmi_nand_data *,
 #define STATUS_UNCORRECTABLE	0xfe
 
 /* Use the platform_id to distinguish different Archs. */
-#define IS_MX23			0x1
-#define IS_MX28			0x2
+#define IS_MX23			0x0
+#define IS_MX28			0x1
+#define IS_MX6Q			0x2
 #define GPMI_IS_MX23(x)		((x)->pdev->id_entry->driver_data == IS_MX23)
 #define GPMI_IS_MX28(x)		((x)->pdev->id_entry->driver_data == IS_MX28)
+#define GPMI_IS_MX6Q(x)		((x)->pdev->id_entry->driver_data == IS_MX6Q)
 #endif