diff options
author | Eilon Greenstein <eilong@broadcom.com> | 2008-06-24 03:29:02 (GMT) |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2008-06-24 03:29:02 (GMT) |
commit | ad8d394804b355bc623decc50748cd01dbc0783b (patch) | |
tree | be2d1c7fc15fc6e1bd17a7d87c697254407fa865 /drivers/net/bnx2x_init.h | |
parent | c18487ee24381b40df3b8b4f54dd13ee9367a1ce (diff) | |
download | linux-fsl-qoriq-ad8d394804b355bc623decc50748cd01dbc0783b.tar.xz |
bnx2x: New init infrastructure
This new initialization code supports the 57711 HW. It also supports
the emulation and FPGA for the 57711 and 57710 initializations values
(very small amount of code which is very helpful in the lab - less
than 30 lines).
The initialization is done via DMAE after the DMAE block is ready -
before it is ready, some of the initialization is done via PCI
configuration transactions (referred to as indirect write). A mutex
to protect the DMAE from being overlapped was added. There are few
new registers which needs to be initialized by SW - the full comment
for those registers is added to the register file. A place holder for
the 57711 (referred to as E1H) microcode was added- the microcode
itself is too big and it is split over the following 4 patches
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/bnx2x_init.h')
-rw-r--r-- | drivers/net/bnx2x_init.h | 345 |
1 files changed, 297 insertions, 48 deletions
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h index bb0ee2d..5a4e82b 100644 --- a/drivers/net/bnx2x_init.h +++ b/drivers/net/bnx2x_init.h @@ -22,7 +22,8 @@ #define INIT_ASIC 0x4 #define INIT_HARDWARE 0x7 -#define STORM_INTMEM_SIZE (0x5800 / 4) +#define STORM_INTMEM_SIZE_E1 (0x5800 / 4) +#define STORM_INTMEM_SIZE_E1H (0x10000 / 4) #define TSTORM_INTMEM_ADDR 0x1a0000 #define CSTORM_INTMEM_ADDR 0x220000 #define XSTORM_INTMEM_ADDR 0x2a0000 @@ -30,7 +31,7 @@ /* Init operation types and structures */ - +/* Common for both E1 and E1H */ #define OP_RD 0x1 /* read single register */ #define OP_WR 0x2 /* write single register */ #define OP_IW 0x3 /* write single register using mailbox */ @@ -38,7 +39,37 @@ #define OP_SI 0x5 /* copy a string using mailbox */ #define OP_ZR 0x6 /* clear memory */ #define OP_ZP 0x7 /* unzip then copy with DMAE */ -#define OP_WB 0x8 /* copy a string using DMAE */ +#define OP_WR_64 0x8 /* write 64 bit pattern */ +#define OP_WB 0x9 /* copy a string using DMAE */ + +/* Operation specific for E1 */ +#define OP_RD_E1 0xa /* read single register */ +#define OP_WR_E1 0xb /* write single register */ +#define OP_IW_E1 0xc /* write single register using mailbox */ +#define OP_SW_E1 0xd /* copy a string to the device */ +#define OP_SI_E1 0xe /* copy a string using mailbox */ +#define OP_ZR_E1 0xf /* clear memory */ +#define OP_ZP_E1 0x10 /* unzip then copy with DMAE */ +#define OP_WR_64_E1 0x11 /* write 64 bit pattern on E1 */ +#define OP_WB_E1 0x12 /* copy a string using DMAE */ + +/* Operation specific for E1H */ +#define OP_RD_E1H 0x13 /* read single register */ +#define OP_WR_E1H 0x14 /* write single register */ +#define OP_IW_E1H 0x15 /* write single register using mailbox */ +#define OP_SW_E1H 0x16 /* copy a string to the device */ +#define OP_SI_E1H 0x17 /* copy a string using mailbox */ +#define OP_ZR_E1H 0x18 /* clear memory */ +#define OP_ZP_E1H 0x19 /* unzip then copy with DMAE */ +#define OP_WR_64_E1H 0x1a /* write 64 bit pattern on E1H */ +#define OP_WB_E1H 0x1b /* copy a string using DMAE */ + +/* FPGA and EMUL specific operations */ +#define OP_WR_EMUL_E1H 0x1c /* write single register on E1H Emul */ +#define OP_WR_EMUL 0x1d /* write single register on Emulation */ +#define OP_WR_FPGA 0x1e /* write single register on FPGA */ +#define OP_WR_ASIC 0x1f /* write single register on ASIC */ + struct raw_op { u32 op :8; @@ -117,11 +148,117 @@ static void bnx2x_init_ind_wr(struct bnx2x *bp, u32 addr, const u32 *data, } } +static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len) +{ +#ifdef USE_DMAE + int offset = 0; + + if (bp->dmae_ready) { + while (len > DMAE_LEN32_WR_MAX) { + bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, + addr + offset, DMAE_LEN32_WR_MAX); + offset += DMAE_LEN32_WR_MAX * 4; + len -= DMAE_LEN32_WR_MAX; + } + bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, + addr + offset, len); + } else + bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len); +#else + bnx2x_init_str_wr(bp, addr, bp->gunzip_buf, len); +#endif +} + +static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len) +{ + if ((len * 4) > FW_BUF_SIZE) { + BNX2X_ERR("LARGE DMAE OPERATION ! addr 0x%x len 0x%x\n", + addr, len*4); + return; + } + memset(bp->gunzip_buf, fill, len * 4); + + bnx2x_write_big_buf(bp, addr, len); +} + +static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, const u32 *data, + u32 len64) +{ + u32 buf_len32 = FW_BUF_SIZE/4; + u32 len = len64*2; + u64 data64 = 0; + int i; + + /* 64 bit value is in a blob: first low DWORD, then high DWORD */ + data64 = HILO_U64((*(data + 1)), (*data)); + len64 = min((u32)(FW_BUF_SIZE/8), len64); + for (i = 0; i < len64; i++) { + u64 *pdata = ((u64 *)(bp->gunzip_buf)) + i; + + *pdata = data64; + } + + for (i = 0; i < len; i += buf_len32) { + u32 cur_len = min(buf_len32, len - i); + + bnx2x_write_big_buf(bp, addr + i * 4, cur_len); + } +} + +/********************************************************* + There are different blobs for each PRAM section. + In addition, each blob write operation is divided into a few operations + in order to decrease the amount of phys. contigious buffer needed. + Thus, when we select a blob the address may be with some offset + from the beginning of PRAM section. + The same holds for the INT_TABLE sections. +**********************************************************/ +#define IF_IS_INT_TABLE_ADDR(base, addr) \ + if (((base) <= (addr)) && ((base) + 0x400 >= (addr))) + +#define IF_IS_PRAM_ADDR(base, addr) \ + if (((base) <= (addr)) && ((base) + 0x40000 >= (addr))) + +static const u32 *bnx2x_sel_blob(u32 addr, const u32 *data, int is_e1) +{ + IF_IS_INT_TABLE_ADDR(TSEM_REG_INT_TABLE, addr) + data = is_e1 ? tsem_int_table_data_e1 : + tsem_int_table_data_e1h; + else + IF_IS_INT_TABLE_ADDR(CSEM_REG_INT_TABLE, addr) + data = is_e1 ? csem_int_table_data_e1 : + csem_int_table_data_e1h; + else + IF_IS_INT_TABLE_ADDR(USEM_REG_INT_TABLE, addr) + data = is_e1 ? usem_int_table_data_e1 : + usem_int_table_data_e1h; + else + IF_IS_INT_TABLE_ADDR(XSEM_REG_INT_TABLE, addr) + data = is_e1 ? xsem_int_table_data_e1 : + xsem_int_table_data_e1h; + else + IF_IS_PRAM_ADDR(TSEM_REG_PRAM, addr) + data = is_e1 ? tsem_pram_data_e1 : tsem_pram_data_e1h; + else + IF_IS_PRAM_ADDR(CSEM_REG_PRAM, addr) + data = is_e1 ? csem_pram_data_e1 : csem_pram_data_e1h; + else + IF_IS_PRAM_ADDR(USEM_REG_PRAM, addr) + data = is_e1 ? usem_pram_data_e1 : usem_pram_data_e1h; + else + IF_IS_PRAM_ADDR(XSEM_REG_PRAM, addr) + data = is_e1 ? xsem_pram_data_e1 : xsem_pram_data_e1h; + + return data; +} + static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data, - u32 len, int gunzip) + u32 len, int gunzip, int is_e1, u32 blob_off) { int offset = 0; + data = bnx2x_sel_blob(addr, data, is_e1) + blob_off; + if (gunzip) { int rc; #ifdef __BIG_ENDIAN @@ -136,64 +273,59 @@ static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, const u32 *data, #endif rc = bnx2x_gunzip(bp, (u8 *)data, len); if (rc) { - DP(NETIF_MSG_HW, "gunzip failed ! rc %d\n", rc); + BNX2X_ERR("gunzip failed ! rc %d\n", rc); return; } len = bp->gunzip_outlen; #ifdef __BIG_ENDIAN kfree(temp); for (i = 0; i < len; i++) - ((u32 *)bp->gunzip_buf)[i] = + ((u32 *)bp->gunzip_buf)[i] = swab32(((u32 *)bp->gunzip_buf)[i]); #endif } else { if ((len * 4) > FW_BUF_SIZE) { - BNX2X_ERR("LARGE DMAE OPERATION ! len 0x%x\n", len*4); + BNX2X_ERR("LARGE DMAE OPERATION ! " + "addr 0x%x len 0x%x\n", addr, len*4); return; } memcpy(bp->gunzip_buf, data, len * 4); } - while (len > DMAE_LEN32_MAX) { - bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, - addr + offset, DMAE_LEN32_MAX); - offset += DMAE_LEN32_MAX * 4; - len -= DMAE_LEN32_MAX; - } - bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, addr + offset, len); -} - -#define INIT_MEM_WB(reg, data, reg_off, len) \ - bnx2x_init_wr_wb(bp, reg + reg_off*4, data, len, 0) - -#define INIT_GUNZIP_DMAE(reg, data, reg_off, len) \ - bnx2x_init_wr_wb(bp, reg + reg_off*4, data, len, 1) - -static void bnx2x_init_fill(struct bnx2x *bp, u32 addr, int fill, u32 len) -{ - int offset = 0; - - if ((len * 4) > FW_BUF_SIZE) { - BNX2X_ERR("LARGE DMAE OPERATION ! len 0x%x\n", len * 4); - return; - } - memset(bp->gunzip_buf, fill, len * 4); - - while (len > DMAE_LEN32_MAX) { + if (bp->dmae_ready) { + while (len > DMAE_LEN32_WR_MAX) { + bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, + addr + offset, DMAE_LEN32_WR_MAX); + offset += DMAE_LEN32_WR_MAX * 4; + len -= DMAE_LEN32_WR_MAX; + } bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, - addr + offset, DMAE_LEN32_MAX); - offset += DMAE_LEN32_MAX * 4; - len -= DMAE_LEN32_MAX; - } - bnx2x_write_dmae(bp, bp->gunzip_mapping + offset, addr + offset, len); + addr + offset, len); + } else + bnx2x_init_ind_wr(bp, addr, bp->gunzip_buf, len); } static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end) { - int i; + int is_e1 = CHIP_IS_E1(bp); + int is_e1h = CHIP_IS_E1H(bp); + int is_emul_e1h = (CHIP_REV_IS_EMUL(bp) && is_e1h); + int hw_wr, i; union init_op *op; u32 op_type, addr, len; - const u32 *data; + const u32 *data, *data_base; + + if (CHIP_REV_IS_FPGA(bp)) + hw_wr = OP_WR_FPGA; + else if (CHIP_REV_IS_EMUL(bp)) + hw_wr = OP_WR_EMUL; + else + hw_wr = OP_WR_ASIC; + + if (is_e1) + data_base = init_data_e1; + else /* CHIP_IS_E1H(bp) */ + data_base = init_data_e1h; for (i = op_start; i < op_end; i++) { @@ -202,7 +334,30 @@ static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end) op_type = op->str_wr.op; addr = op->str_wr.offset; len = op->str_wr.data_len; - data = init_data + op->str_wr.data_off; + data = data_base + op->str_wr.data_off; + + /* carefull! it must be in order */ + if (unlikely(op_type > OP_WB)) { + + /* If E1 only */ + if (op_type <= OP_WB_E1) { + if (is_e1) + op_type -= (OP_RD_E1 - OP_RD); + + /* If E1H only */ + } else if (op_type <= OP_WB_E1H) { + if (is_e1h) + op_type -= (OP_RD_E1H - OP_RD); + } + + /* HW/EMUL specific */ + if (op_type == hw_wr) + op_type = OP_WR; + + /* EMUL on E1H is special */ + if ((op_type == OP_WR_EMUL_E1H) && is_emul_e1h) + op_type = OP_WR; + } switch (op_type) { case OP_RD: @@ -215,7 +370,7 @@ static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end) bnx2x_init_str_wr(bp, addr, data, len); break; case OP_WB: - bnx2x_init_wr_wb(bp, addr, data, len, 0); + bnx2x_init_wr_wb(bp, addr, data, len, 0, is_e1, 0); break; case OP_SI: bnx2x_init_ind_wr(bp, addr, data, len); @@ -224,10 +379,21 @@ static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end) bnx2x_init_fill(bp, addr, 0, op->zero.len); break; case OP_ZP: - bnx2x_init_wr_wb(bp, addr, data, len, 1); + bnx2x_init_wr_wb(bp, addr, data, len, 1, is_e1, + op->str_wr.data_off); + break; + case OP_WR_64: + bnx2x_init_wr_64(bp, addr, data, len); break; default: - BNX2X_ERR("BAD init operation!\n"); + /* happens whenever an op is of a diff HW */ +#if 0 + DP(NETIF_MSG_HW, "skipping init operation " + "index %d[%d:%d]: type %d addr 0x%x " + "len %d(0x%x)\n", + i, op_start, op_end, op_type, addr, len, len); +#endif + break; } } } @@ -238,7 +404,7 @@ static void bnx2x_init_block(struct bnx2x *bp, u32 op_start, u32 op_end) ****************************************************************************/ /* * This code configures the PCI read/write arbiter - * which implements a wighted round robin + * which implements a weighted round robin * between the virtual queues in the chip. * * The values were derived for each PCI max payload and max request size. @@ -308,7 +474,7 @@ static const struct arb_line write_arb_data[NUM_WR_Q][MAX_WR_ORD + 1] = { {{8 , 64 , 25}, {16 , 64 , 41}, {32 , 64 , 81} } }; -/* register adresses for read queues */ +/* register addresses for read queues */ static const struct arb_line read_arb_addr[NUM_RD_Q-1] = { {PXP2_REG_RQ_BW_RD_L0, PXP2_REG_RQ_BW_RD_ADD0, PXP2_REG_RQ_BW_RD_UBOUND0}, @@ -368,7 +534,7 @@ static const struct arb_line read_arb_addr[NUM_RD_Q-1] = { PXP2_REG_PSWRQ_BW_UB28} }; -/* register adresses for wrtie queues */ +/* register addresses for write queues */ static const struct arb_line write_arb_addr[NUM_WR_Q-1] = { {PXP2_REG_PSWRQ_BW_L1, PXP2_REG_PSWRQ_BW_ADD1, PXP2_REG_PSWRQ_BW_UB1}, @@ -417,6 +583,10 @@ static void bnx2x_init_pxp(struct bnx2x *bp) w_order, MAX_WR_ORD); w_order = MAX_WR_ORD; } + if (CHIP_REV_IS_FPGA(bp)) { + DP(NETIF_MSG_HW, "write order adjusted to 1 for FPGA\n"); + w_order = 0; + } DP(NETIF_MSG_HW, "read order %d write order %d\n", r_order, w_order); for (i = 0; i < NUM_RD_Q-1; i++) { @@ -474,7 +644,20 @@ static void bnx2x_init_pxp(struct bnx2x *bp) REG_WR(bp, PXP2_REG_RQ_PDR_LIMIT, 0xe00); REG_WR(bp, PXP2_REG_WR_USDMDP_TH, (0x18 << w_order)); - REG_WR(bp, PXP2_REG_WR_DMAE_TH, (128 << w_order)/16); + + if (CHIP_IS_E1H(bp)) { + REG_WR(bp, PXP2_REG_WR_HC_MPS, w_order+1); + REG_WR(bp, PXP2_REG_WR_USDM_MPS, w_order+1); + REG_WR(bp, PXP2_REG_WR_CSDM_MPS, w_order+1); + REG_WR(bp, PXP2_REG_WR_TSDM_MPS, w_order+1); + REG_WR(bp, PXP2_REG_WR_XSDM_MPS, w_order+1); + REG_WR(bp, PXP2_REG_WR_QM_MPS, w_order+1); + REG_WR(bp, PXP2_REG_WR_TM_MPS, w_order+1); + REG_WR(bp, PXP2_REG_WR_SRC_MPS, w_order+1); + REG_WR(bp, PXP2_REG_WR_DBG_MPS, w_order+1); + REG_WR(bp, PXP2_REG_WR_DMAE_MPS, 2); /* DMAE is special */ + REG_WR(bp, PXP2_REG_WR_CDU_MPS, w_order+1); + } } @@ -557,6 +740,72 @@ static u8 calc_crc8(u32 data, u8 crc) return crc_res; } +/* regiesers addresses are not in order + so these arrays help simplify the code */ +static const int cm_start[E1H_FUNC_MAX][9] = { + {MISC_FUNC0_START, TCM_FUNC0_START, UCM_FUNC0_START, CCM_FUNC0_START, + XCM_FUNC0_START, TSEM_FUNC0_START, USEM_FUNC0_START, CSEM_FUNC0_START, + XSEM_FUNC0_START}, + {MISC_FUNC1_START, TCM_FUNC1_START, UCM_FUNC1_START, CCM_FUNC1_START, + XCM_FUNC1_START, TSEM_FUNC1_START, USEM_FUNC1_START, CSEM_FUNC1_START, + XSEM_FUNC1_START}, + {MISC_FUNC2_START, TCM_FUNC2_START, UCM_FUNC2_START, CCM_FUNC2_START, + XCM_FUNC2_START, TSEM_FUNC2_START, USEM_FUNC2_START, CSEM_FUNC2_START, + XSEM_FUNC2_START}, + {MISC_FUNC3_START, TCM_FUNC3_START, UCM_FUNC3_START, CCM_FUNC3_START, + XCM_FUNC3_START, TSEM_FUNC3_START, USEM_FUNC3_START, CSEM_FUNC3_START, + XSEM_FUNC3_START}, + {MISC_FUNC4_START, TCM_FUNC4_START, UCM_FUNC4_START, CCM_FUNC4_START, + XCM_FUNC4_START, TSEM_FUNC4_START, USEM_FUNC4_START, CSEM_FUNC4_START, + XSEM_FUNC4_START}, + {MISC_FUNC5_START, TCM_FUNC5_START, UCM_FUNC5_START, CCM_FUNC5_START, + XCM_FUNC5_START, TSEM_FUNC5_START, USEM_FUNC5_START, CSEM_FUNC5_START, + XSEM_FUNC5_START}, + {MISC_FUNC6_START, TCM_FUNC6_START, UCM_FUNC6_START, CCM_FUNC6_START, + XCM_FUNC6_START, TSEM_FUNC6_START, USEM_FUNC6_START, CSEM_FUNC6_START, + XSEM_FUNC6_START}, + {MISC_FUNC7_START, TCM_FUNC7_START, UCM_FUNC7_START, CCM_FUNC7_START, + XCM_FUNC7_START, TSEM_FUNC7_START, USEM_FUNC7_START, CSEM_FUNC7_START, + XSEM_FUNC7_START} +}; + +static const int cm_end[E1H_FUNC_MAX][9] = { + {MISC_FUNC0_END, TCM_FUNC0_END, UCM_FUNC0_END, CCM_FUNC0_END, + XCM_FUNC0_END, TSEM_FUNC0_END, USEM_FUNC0_END, CSEM_FUNC0_END, + XSEM_FUNC0_END}, + {MISC_FUNC1_END, TCM_FUNC1_END, UCM_FUNC1_END, CCM_FUNC1_END, + XCM_FUNC1_END, TSEM_FUNC1_END, USEM_FUNC1_END, CSEM_FUNC1_END, + XSEM_FUNC1_END}, + {MISC_FUNC2_END, TCM_FUNC2_END, UCM_FUNC2_END, CCM_FUNC2_END, + XCM_FUNC2_END, TSEM_FUNC2_END, USEM_FUNC2_END, CSEM_FUNC2_END, + XSEM_FUNC2_END}, + {MISC_FUNC3_END, TCM_FUNC3_END, UCM_FUNC3_END, CCM_FUNC3_END, + XCM_FUNC3_END, TSEM_FUNC3_END, USEM_FUNC3_END, CSEM_FUNC3_END, + XSEM_FUNC3_END}, + {MISC_FUNC4_END, TCM_FUNC4_END, UCM_FUNC4_END, CCM_FUNC4_END, + XCM_FUNC4_END, TSEM_FUNC4_END, USEM_FUNC4_END, CSEM_FUNC4_END, + XSEM_FUNC4_END}, + {MISC_FUNC5_END, TCM_FUNC5_END, UCM_FUNC5_END, CCM_FUNC5_END, + XCM_FUNC5_END, TSEM_FUNC5_END, USEM_FUNC5_END, CSEM_FUNC5_END, + XSEM_FUNC5_END}, + {MISC_FUNC6_END, TCM_FUNC6_END, UCM_FUNC6_END, CCM_FUNC6_END, + XCM_FUNC6_END, TSEM_FUNC6_END, USEM_FUNC6_END, CSEM_FUNC6_END, + XSEM_FUNC6_END}, + {MISC_FUNC7_END, TCM_FUNC7_END, UCM_FUNC7_END, CCM_FUNC7_END, + XCM_FUNC7_END, TSEM_FUNC7_END, USEM_FUNC7_END, CSEM_FUNC7_END, + XSEM_FUNC7_END}, +}; + +static const int hc_limits[E1H_FUNC_MAX][2] = { + {HC_FUNC0_START, HC_FUNC0_END}, + {HC_FUNC1_START, HC_FUNC1_END}, + {HC_FUNC2_START, HC_FUNC2_END}, + {HC_FUNC3_START, HC_FUNC3_END}, + {HC_FUNC4_START, HC_FUNC4_END}, + {HC_FUNC5_START, HC_FUNC5_END}, + {HC_FUNC6_START, HC_FUNC6_END}, + {HC_FUNC7_START, HC_FUNC7_END} +}; #endif /* BNX2X_INIT_H */ |