diff options
author | Andy Gospodarek <andy@greyhouse.net> | 2007-09-18 01:50:36 (GMT) |
---|---|---|
committer | David S. Miller <davem@sunset.davemloft.net> | 2007-10-10 23:51:34 (GMT) |
commit | 1a348ccc1047a00507e554826775a3d81f7f3437 (patch) | |
tree | df2a7cd4ee403dbb60705a5988c97a721f7eb2a0 /drivers/net/tehuti.c | |
parent | 1202d6ff356cc66dc8d2b85546eb4f187f9e1f25 (diff) | |
download | linux-fsl-qoriq-1a348ccc1047a00507e554826775a3d81f7f3437.tar.xz |
[NET]: Add Tehuti network driver.
[ Ported to napi_struct changes... -DaveM ]
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/tehuti.c')
-rw-r--r-- | drivers/net/tehuti.c | 2508 |
1 files changed, 2508 insertions, 0 deletions
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c new file mode 100644 index 0000000..2483431 --- /dev/null +++ b/drivers/net/tehuti.c @@ -0,0 +1,2508 @@ +/* + * Tehuti Networks(R) Network Driver + * ethtool interface implementation + * Copyright (C) 2007 Tehuti Networks Ltd. All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* + * RX HW/SW interaction overview + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * There are 2 types of RX communication channels betwean driver and NIC. + * 1) RX Free Fifo - RXF - holds descriptors of empty buffers to accept incoming + * traffic. This Fifo is filled by SW and is readen by HW. Each descriptor holds + * info about buffer's location, size and ID. An ID field is used to identify a + * buffer when it's returned with data via RXD Fifo (see below) + * 2) RX Data Fifo - RXD - holds descriptors of full buffers. This Fifo is + * filled by HW and is readen by SW. Each descriptor holds status and ID. + * HW pops descriptor from RXF Fifo, stores ID, fills buffer with incoming data, + * via dma moves it into host memory, builds new RXD descriptor with same ID, + * pushes it into RXD Fifo and raises interrupt to indicate new RX data. + * + * Current NIC configuration (registers + firmware) makes NIC use 2 RXF Fifos. + * One holds 1.5K packets and another - 26K packets. Depending on incoming + * packet size, HW desides on a RXF Fifo to pop buffer from. When packet is + * filled with data, HW builds new RXD descriptor for it and push it into single + * RXD Fifo. + * + * RX SW Data Structures + * ~~~~~~~~~~~~~~~~~~~~~ + * skb db - used to keep track of all skbs owned by SW and their dma addresses. + * For RX case, ownership lasts from allocating new empty skb for RXF until + * accepting full skb from RXD and passing it to OS. Each RXF Fifo has its own + * skb db. Implemented as array with bitmask. + * fifo - keeps info about fifo's size and location, relevant HW registers, + * usage and skb db. Each RXD and RXF Fifo has its own fifo structure. + * Implemented as simple struct. + * + * RX SW Execution Flow + * ~~~~~~~~~~~~~~~~~~~~ + * Upon initialization (ifconfig up) driver creates RX fifos and initializes + * relevant registers. At the end of init phase, driver enables interrupts. + * NIC sees that there is no RXF buffers and raises + * RD_INTR interrupt, isr fills skbs and Rx begins. + * Driver has two receive operation modes: + * NAPI - interrupt-driven mixed with polling + * interrupt-driven only + * + * Interrupt-driven only flow is following. When buffer is ready, HW raises + * interrupt and isr is called. isr collects all available packets + * (bdx_rx_receive), refills skbs (bdx_rx_alloc_skbs) and exit. + + * Rx buffer allocation note + * ~~~~~~~~~~~~~~~~~~~~~~~~~ + * Driver cares to feed such amount of RxF descriptors that respective amount of + * RxD descriptors can not fill entire RxD fifo. The main reason is lack of + * overflow check in Bordeaux for RxD fifo free/used size. + * FIXME: this is NOT fully implemented, more work should be done + * + */ + +#include "tehuti.h" +#include "tehuti_fw.h" + +static struct pci_device_id __devinitdata bdx_pci_tbl[] = { + {0x1FC9, 0x3009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x1FC9, 0x3010, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0x1FC9, 0x3014, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0} +}; + +MODULE_DEVICE_TABLE(pci, bdx_pci_tbl); + +/* Definitions needed by ISR or NAPI functions */ +static void bdx_rx_alloc_skbs(struct bdx_priv *priv, struct rxf_fifo *f); +static void bdx_tx_cleanup(struct bdx_priv *priv); +static int bdx_rx_receive(struct bdx_priv *priv, struct rxd_fifo *f, int budget); + +/* Definitions needed by FW loading */ +static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size); + +/* Definitions needed by hw_start */ +static int bdx_tx_init(struct bdx_priv *priv); +static int bdx_rx_init(struct bdx_priv *priv); + +/* Definitions needed by bdx_close */ +static void bdx_rx_free(struct bdx_priv *priv); +static void bdx_tx_free(struct bdx_priv *priv); + +/* Definitions needed by bdx_probe */ +static void bdx_ethtool_ops(struct net_device *netdev); + +/************************************************************************* + * Print Info * + *************************************************************************/ + +static void print_hw_id(struct pci_dev *pdev) +{ + struct pci_nic *nic = pci_get_drvdata(pdev); + u16 pci_link_status = 0; + u16 pci_ctrl = 0; + + pci_read_config_word(pdev, PCI_LINK_STATUS_REG, &pci_link_status); + pci_read_config_word(pdev, PCI_DEV_CTRL_REG, &pci_ctrl); + + printk(KERN_INFO "tehuti: %s%s\n", BDX_NIC_NAME, + nic->port_num == 1 ? "" : ", 2-Port"); + printk(KERN_INFO + "tehuti: srom 0x%x fpga %d build %u lane# %d" + " max_pl 0x%x mrrs 0x%x\n", + readl(nic->regs + SROM_VER), readl(nic->regs + FPGA_VER) & 0xFFF, + readl(nic->regs + FPGA_SEED), + GET_LINK_STATUS_LANES(pci_link_status), + GET_DEV_CTRL_MAXPL(pci_ctrl), GET_DEV_CTRL_MRRS(pci_ctrl)); +} + +static void print_fw_id(struct pci_nic *nic) +{ + printk(KERN_INFO "tehuti: fw 0x%x\n", readl(nic->regs + FW_VER)); +} + +static void print_eth_id(struct net_device *ndev) +{ + printk(KERN_INFO "%s: %s, Port %c\n", ndev->name, BDX_NIC_NAME, + (ndev->if_port == 0) ? 'A' : 'B'); + +} + +/************************************************************************* + * Code * + *************************************************************************/ + +#define bdx_enable_interrupts(priv) \ + do { WRITE_REG(priv, regIMR, IR_RUN); } while (0) +#define bdx_disable_interrupts(priv) \ + do { WRITE_REG(priv, regIMR, 0); } while (0) + +/* bdx_fifo_init + * create TX/RX descriptor fifo for host-NIC communication. + * 1K extra space is allocated at the end of the fifo to simplify + * processing of descriptors that wraps around fifo's end + * @priv - NIC private structure + * @f - fifo to initialize + * @fsz_type - fifo size type: 0-4KB, 1-8KB, 2-16KB, 3-32KB + * @reg_XXX - offsets of registers relative to base address + * + * Returns 0 on success, negative value on failure + * + */ +static int +bdx_fifo_init(struct bdx_priv *priv, struct fifo *f, int fsz_type, + u16 reg_CFG0, u16 reg_CFG1, u16 reg_RPTR, u16 reg_WPTR) +{ + u16 memsz = FIFO_SIZE * (1 << fsz_type); + + memset(f, 0, sizeof(struct fifo)); + /* pci_alloc_consistent gives us 4k-aligned memory */ + f->va = pci_alloc_consistent(priv->pdev, + memsz + FIFO_EXTRA_SPACE, &f->da); + if (!f->va) { + ERR("pci_alloc_consistent failed\n"); + RET(-ENOMEM); + } + f->reg_CFG0 = reg_CFG0; + f->reg_CFG1 = reg_CFG1; + f->reg_RPTR = reg_RPTR; + f->reg_WPTR = reg_WPTR; + f->rptr = 0; + f->wptr = 0; + f->memsz = memsz; + f->size_mask = memsz - 1; + WRITE_REG(priv, reg_CFG0, (u32) ((f->da & TX_RX_CFG0_BASE) | fsz_type)); + WRITE_REG(priv, reg_CFG1, H32_64(f->da)); + + RET(0); +} + +/* bdx_fifo_free - free all resources used by fifo + * @priv - NIC private structure + * @f - fifo to release + */ +static void bdx_fifo_free(struct bdx_priv *priv, struct fifo *f) +{ + ENTER; + if (f->va) { + pci_free_consistent(priv->pdev, + f->memsz + FIFO_EXTRA_SPACE, f->va, f->da); + f->va = NULL; + } + RET(); +} + +/* + * bdx_link_changed - notifies OS about hw link state. + * @bdx_priv - hw adapter structure + */ +static void bdx_link_changed(struct bdx_priv *priv) +{ + u32 link = READ_REG(priv, regMAC_LNK_STAT) & MAC_LINK_STAT; + + if (!link) { + if (netif_carrier_ok(priv->ndev)) { + netif_stop_queue(priv->ndev); + netif_carrier_off(priv->ndev); + ERR("%s: Link Down\n", priv->ndev->name); + } + } else { + if (!netif_carrier_ok(priv->ndev)) { + netif_wake_queue(priv->ndev); + netif_carrier_on(priv->ndev); + ERR("%s: Link Up\n", priv->ndev->name); + } + } +} + +static void bdx_isr_extra(struct bdx_priv *priv, u32 isr) +{ + if (isr & IR_RX_FREE_0) { + bdx_rx_alloc_skbs(priv, &priv->rxf_fifo0); + DBG("RX_FREE_0\n"); + } + + if (isr & IR_LNKCHG0) + bdx_link_changed(priv); + + if (isr & IR_PCIE_LINK) + ERR("%s: PCI-E Link Fault\n", priv->ndev->name); + + if (isr & IR_PCIE_TOUT) + ERR("%s: PCI-E Time Out\n", priv->ndev->name); + +} + +/* bdx_isr - Interrupt Service Routine for Bordeaux NIC + * @irq - interrupt number + * @ndev - network device + * @regs - CPU registers + * + * Return IRQ_NONE if it was not our interrupt, IRQ_HANDLED - otherwise + * + * It reads ISR register to know interrupt reasons, and proceed them one by one. + * Reasons of interest are: + * RX_DESC - new packet has arrived and RXD fifo holds its descriptor + * RX_FREE - number of free Rx buffers in RXF fifo gets low + * TX_FREE - packet was transmited and RXF fifo holds its descriptor + */ + +static irqreturn_t bdx_isr_napi(int irq, void *dev) +{ + struct net_device *ndev = dev; + struct bdx_priv *priv = ndev->priv; + u32 isr; + + ENTER; + isr = (READ_REG(priv, regISR) & IR_RUN); + if (unlikely(!isr)) { + bdx_enable_interrupts(priv); + return IRQ_NONE; /* Not our interrupt */ + } + + if (isr & IR_EXTRA) + bdx_isr_extra(priv, isr); + + if (isr & (IR_RX_DESC_0 | IR_TX_FREE_0)) { + if (likely(netif_rx_schedule_prep(ndev, &priv->napi))) { + __netif_rx_schedule(ndev, &priv->napi); + RET(IRQ_HANDLED); + } else { + /* NOTE: we get here if intr has slipped into window + * between these lines in bdx_poll: + * bdx_enable_interrupts(priv); + * return 0; + * currently intrs are disabled (since we read ISR), + * and we have failed to register next poll. + * so we read the regs to trigger chip + * and allow further interupts. */ + READ_REG(priv, regTXF_WPTR_0); + READ_REG(priv, regRXD_WPTR_0); + } + } + + bdx_enable_interrupts(priv); + RET(IRQ_HANDLED); +} + +static int bdx_poll(struct napi_struct *napi, int budget) +{ + struct bdx_priv *priv = container_of(napi, struct bdx_priv, napi); + struct net_device *dev = priv->ndev; + int work_done; + + ENTER; + bdx_tx_cleanup(priv); + work_done = bdx_rx_receive(priv, &priv->rxd_fifo0, budget); + if ((work_done < budget) || + (priv->napi_stop++ >= 30)) { + DBG("rx poll is done. backing to isr-driven\n"); + + /* from time to time we exit to let NAPI layer release + * device lock and allow waiting tasks (eg rmmod) to advance) */ + priv->napi_stop = 0; + + netif_rx_complete(dev, napi); + bdx_enable_interrupts(priv); + } + return work_done; +} + +/* bdx_fw_load - loads firmware to NIC + * @priv - NIC private structure + * Firmware is loaded via TXD fifo, so it must be initialized first. + * Firware must be loaded once per NIC not per PCI device provided by NIC (NIC + * can have few of them). So all drivers use semaphore register to choose one + * that will actually load FW to NIC. + */ + +static int bdx_fw_load(struct bdx_priv *priv) +{ + int master, i; + + ENTER; + master = READ_REG(priv, regINIT_SEMAPHORE); + if (!READ_REG(priv, regINIT_STATUS) && master) { + bdx_tx_push_desc_safe(priv, s_firmLoad, sizeof(s_firmLoad)); + mdelay(100); + } + for (i = 0; i < 200; i++) { + if (READ_REG(priv, regINIT_STATUS)) + break; + mdelay(2); + } + if (master) + WRITE_REG(priv, regINIT_SEMAPHORE, 1); + + if (i == 200) { + ERR("%s: firmware loading failed\n", priv->ndev->name); + DBG("VPC = 0x%x VIC = 0x%x INIT_STATUS = 0x%x i=%d\n", + READ_REG(priv, regVPC), + READ_REG(priv, regVIC), READ_REG(priv, regINIT_STATUS), i); + RET(-EIO); + } else { + DBG("%s: firmware loading success\n", priv->ndev->name); + RET(0); + } +} + +static void bdx_restore_mac(struct net_device *ndev, struct bdx_priv *priv) +{ + u32 val; + + ENTER; + DBG("mac0=%x mac1=%x mac2=%x\n", + READ_REG(priv, regUNC_MAC0_A), + READ_REG(priv, regUNC_MAC1_A), READ_REG(priv, regUNC_MAC2_A)); + + val = (ndev->dev_addr[0] << 8) | (ndev->dev_addr[1]); + WRITE_REG(priv, regUNC_MAC2_A, val); + val = (ndev->dev_addr[2] << 8) | (ndev->dev_addr[3]); + WRITE_REG(priv, regUNC_MAC1_A, val); + val = (ndev->dev_addr[4] << 8) | (ndev->dev_addr[5]); + WRITE_REG(priv, regUNC_MAC0_A, val); + + DBG("mac0=%x mac1=%x mac2=%x\n", + READ_REG(priv, regUNC_MAC0_A), + READ_REG(priv, regUNC_MAC1_A), READ_REG(priv, regUNC_MAC2_A)); + RET(); +} + +/* bdx_hw_start - inits registers and starts HW's Rx and Tx engines + * @priv - NIC private structure + */ +static int bdx_hw_start(struct bdx_priv *priv) +{ + int rc = -EIO; + struct net_device *ndev = priv->ndev; + + ENTER; + bdx_link_changed(priv); + + /* 10G overall max length (vlan, eth&ip header, ip payload, crc) */ + WRITE_REG(priv, regFRM_LENGTH, 0X3FE0); + WRITE_REG(priv, regPAUSE_QUANT, 0x96); + WRITE_REG(priv, regRX_FIFO_SECTION, 0x800010); + WRITE_REG(priv, regTX_FIFO_SECTION, 0xE00010); + WRITE_REG(priv, regRX_FULLNESS, 0); + WRITE_REG(priv, regTX_FULLNESS, 0); + WRITE_REG(priv, regCTRLST, + regCTRLST_BASE | regCTRLST_RX_ENA | regCTRLST_TX_ENA); + + WRITE_REG(priv, regVGLB, 0); + WRITE_REG(priv, regMAX_FRAME_A, + priv->rxf_fifo0.m.pktsz & MAX_FRAME_AB_VAL); + + DBG("RDINTCM=%08x\n", priv->rdintcm); /*NOTE: test script uses this */ + WRITE_REG(priv, regRDINTCM0, priv->rdintcm); + WRITE_REG(priv, regRDINTCM2, 0); /*cpu_to_le32(rcm.val)); */ + + DBG("TDINTCM=%08x\n", priv->tdintcm); /*NOTE: test script uses this */ + WRITE_REG(priv, regTDINTCM0, priv->tdintcm); /* old val = 0x300064 */ + + /* Enable timer interrupt once in 2 secs. */ + /*WRITE_REG(priv, regGTMR0, ((GTMR_SEC * 2) & GTMR_DATA)); */ + bdx_restore_mac(priv->ndev, priv); + + WRITE_REG(priv, regGMAC_RXF_A, GMAC_RX_FILTER_OSEN | + GMAC_RX_FILTER_AM | GMAC_RX_FILTER_AB); + +#define BDX_IRQ_TYPE ((priv->nic->irq_type == IRQ_MSI)?0:IRQF_SHARED) + if ((rc = request_irq(priv->pdev->irq, &bdx_isr_napi, BDX_IRQ_TYPE, + ndev->name, ndev))) + goto err_irq; + bdx_enable_interrupts(priv); + + RET(0); + +err_irq: + RET(rc); +} + +static void bdx_hw_stop(struct bdx_priv *priv) +{ + ENTER; + bdx_disable_interrupts(priv); + free_irq(priv->pdev->irq, priv->ndev); + + netif_carrier_off(priv->ndev); + netif_stop_queue(priv->ndev); + + RET(); +} + +static int bdx_hw_reset_direct(void __iomem *regs) +{ + u32 val, i; + ENTER; + + /* reset sequences: read, write 1, read, write 0 */ + val = readl(regs + regCLKPLL); + writel((val | CLKPLL_SFTRST) + 0x8, regs + regCLKPLL); + udelay(50); + val = readl(regs + regCLKPLL); + writel(val & ~CLKPLL_SFTRST, regs + regCLKPLL); + + /* check that the PLLs are locked and reset ended */ + for (i = 0; i < 70; i++, mdelay(10)) + if ((readl(regs + regCLKPLL) & CLKPLL_LKD) == CLKPLL_LKD) { + /* do any PCI-E read transaction */ + readl(regs + regRXD_CFG0_0); + return 0; + } + ERR("tehuti: HW reset failed\n"); + return 1; /* failure */ +} + +static int bdx_hw_reset(struct bdx_priv *priv) +{ + u32 val, i; + ENTER; + + if (priv->port == 0) { + /* reset sequences: read, write 1, read, write 0 */ + val = READ_REG(priv, regCLKPLL); + WRITE_REG(priv, regCLKPLL, (val | CLKPLL_SFTRST) + 0x8); + udelay(50); + val = READ_REG(priv, regCLKPLL); + WRITE_REG(priv, regCLKPLL, val & ~CLKPLL_SFTRST); + } + /* check that the PLLs are locked and reset ended */ + for (i = 0; i < 70; i++, mdelay(10)) + if ((READ_REG(priv, regCLKPLL) & CLKPLL_LKD) == CLKPLL_LKD) { + /* do any PCI-E read transaction */ + READ_REG(priv, regRXD_CFG0_0); + return 0; + } + ERR("tehuti: HW reset failed\n"); + return 1; /* failure */ +} + +static int bdx_sw_reset(struct bdx_priv *priv) +{ + int i; + + ENTER; + /* 1. load MAC (obsolete) */ + /* 2. disable Rx (and Tx) */ + WRITE_REG(priv, regGMAC_RXF_A, 0); + mdelay(100); + /* 3. disable port */ + WRITE_REG(priv, regDIS_PORT, 1); + /* 4. disable queue */ + WRITE_REG(priv, regDIS_QU, 1); + /* 5. wait until hw is disabled */ + for (i = 0; i < 50; i++) { + if (READ_REG(priv, regRST_PORT) & 1) + break; + mdelay(10); + } + if (i == 50) + ERR("%s: SW reset timeout. continuing anyway\n", + priv->ndev->name); + + /* 6. disable intrs */ + WRITE_REG(priv, regRDINTCM0, 0); + WRITE_REG(priv, regTDINTCM0, 0); + WRITE_REG(priv, regIMR, 0); + READ_REG(priv, regISR); + + /* 7. reset queue */ + WRITE_REG(priv, regRST_QU, 1); + /* 8. reset port */ + WRITE_REG(priv, regRST_PORT, 1); + /* 9. zero all read and write pointers */ + for (i = regTXD_WPTR_0; i <= regTXF_RPTR_3; i += 0x10) + DBG("%x = %x\n", i, READ_REG(priv, i) & TXF_WPTR_WR_PTR); + for (i = regTXD_WPTR_0; i <= regTXF_RPTR_3; i += 0x10) + WRITE_REG(priv, i, 0); + /* 10. unseet port disable */ + WRITE_REG(priv, regDIS_PORT, 0); + /* 11. unset queue disable */ + WRITE_REG(priv, regDIS_QU, 0); + /* 12. unset queue reset */ + WRITE_REG(priv, regRST_QU, 0); + /* 13. unset port reset */ + WRITE_REG(priv, regRST_PORT, 0); + /* 14. enable Rx */ + /* skiped. will be done later */ + /* 15. save MAC (obsolete) */ + for (i = regTXD_WPTR_0; i <= regTXF_RPTR_3; i += 0x10) + DBG("%x = %x\n", i, READ_REG(priv, i) & TXF_WPTR_WR_PTR); + + RET(0); +} + +/* bdx_reset - performs right type of reset depending on hw type */ +static int bdx_reset(struct bdx_priv *priv) +{ + ENTER; + RET((priv->pdev->device == 0x3009) + ? bdx_hw_reset(priv) + : bdx_sw_reset(priv)); +} + +/** + * bdx_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + **/ +static int bdx_close(struct net_device *ndev) +{ + struct bdx_priv *priv = NULL; + + ENTER; + priv = ndev->priv; + + napi_disable(&priv->napi); + + bdx_reset(priv); + bdx_hw_stop(priv); + bdx_rx_free(priv); + bdx_tx_free(priv); + RET(0); +} + +/** + * bdx_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + **/ +static int bdx_open(struct net_device *ndev) +{ + struct bdx_priv *priv; + int rc; + + ENTER; + priv = ndev->priv; + bdx_reset(priv); + if (netif_running(ndev)) + netif_stop_queue(priv->ndev); + + if ((rc = bdx_tx_init(priv))) + goto err; + + if ((rc = bdx_rx_init(priv))) + goto err; + + if ((rc = bdx_fw_load(priv))) + goto err; + + bdx_rx_alloc_skbs(priv, &priv->rxf_fifo0); + + if ((rc = bdx_hw_start(priv))) + goto err; + + napi_enable(&priv->napi); + + print_fw_id(priv->nic); + + RET(0); + +err: + bdx_close(ndev); + RET(rc); +} + +static void __init bdx_firmware_endianess(void) +{ + int i; + for (i = 0; i < sizeof(s_firmLoad) / sizeof(u32); i++) + s_firmLoad[i] = CPU_CHIP_SWAP32(s_firmLoad[i]); +} + +static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd) +{ + struct bdx_priv *priv = ndev->priv; + u32 data[3]; + int error; + + ENTER; + + DBG("jiffies=%ld cmd=%d\n", jiffies, cmd); + if (cmd != SIOCDEVPRIVATE) { + error = copy_from_user(data, ifr->ifr_data, sizeof(data)); + if (error) { + ERR("cant copy from user\n"); + RET(error); + } + DBG("%d 0x%x 0x%x\n", data[0], data[1], data[2]); + } + + switch (data[0]) { + + case BDX_OP_READ: + data[2] = READ_REG(priv, data[1]); + DBG("read_reg(0x%x)=0x%x (dec %d)\n", data[1], data[2], + data[2]); + error = copy_to_user(ifr->ifr_data, data, sizeof(data)); + if (error) + RET(error); + break; + + case BDX_OP_WRITE: + WRITE_REG(priv, data[1], data[2]); + DBG("write_reg(0x%x, 0x%x)\n", data[1], data[2]); + break; + + default: + RET(-EOPNOTSUPP); + } + return 0; +} + +static int bdx_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd) +{ + ENTER; + if (cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15)) + RET(bdx_ioctl_priv(ndev, ifr, cmd)); + else + RET(-EOPNOTSUPP); +} + +/* + * __bdx_vlan_rx_vid - private helper for adding/killing VLAN vid + * by passing VLAN filter table to hardware + * @ndev network device + * @vid VLAN vid + * @op add or kill operation + */ +static void __bdx_vlan_rx_vid(struct net_device *ndev, uint16_t vid, int enable) +{ + struct bdx_priv *priv = ndev->priv; + u32 reg, bit, val; + + ENTER; + DBG2("vid=%d value=%d\n", (int)vid, enable); + if (unlikely(vid >= 4096)) { + ERR("tehuti: invalid VID: %u (> 4096)\n", vid); + RET(); + } + reg = regVLAN_0 + (vid / 32) * 4; + bit = 1 << vid % 32; + val = READ_REG(priv, reg); + DBG2("reg=%x, val=%x, bit=%d\n", reg, val, bit); + if (enable) + val |= bit; + else + val &= ~bit; + DBG2("new val %x\n", val); + WRITE_REG(priv, reg, val); + RET(); +} + +/* + * bdx_vlan_rx_add_vid - kernel hook for adding VLAN vid to hw filtering table + * @ndev network device + * @vid VLAN vid to add + */ +static void bdx_vlan_rx_add_vid(struct net_device *ndev, uint16_t vid) +{ + __bdx_vlan_rx_vid(ndev, vid, 1); +} + +/* + * bdx_vlan_rx_kill_vid - kernel hook for killing VLAN vid in hw filtering table + * @ndev network device + * @vid VLAN vid to kill + */ +static void bdx_vlan_rx_kill_vid(struct net_device *ndev, unsigned short vid) +{ + __bdx_vlan_rx_vid(ndev, vid, 0); +} + +/* + * bdx_vlan_rx_register - kernel hook for adding VLAN group + * @ndev network device + * @grp VLAN group + */ +static void +bdx_vlan_rx_register(struct net_device *ndev, struct vlan_group *grp) +{ + struct bdx_priv *priv = ndev->priv; + + ENTER; + DBG("device='%s', group='%p'\n", ndev->name, grp); + priv->vlgrp = grp; + RET(); +} + +/** + * bdx_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + */ +static int bdx_change_mtu(struct net_device *ndev, int new_mtu) +{ + BDX_ASSERT(ndev == 0); + ENTER; + + if (new_mtu == ndev->mtu) + RET(0); + + /* enforce minimum frame size */ + if (new_mtu < ETH_ZLEN) { + ERR("%s: %s mtu %d is less then minimal %d\n", + BDX_DRV_NAME, ndev->name, new_mtu, ETH_ZLEN); + RET(-EINVAL); + } + + ndev->mtu = new_mtu; + if (netif_running(ndev)) { + bdx_close(ndev); + bdx_open(ndev); + } + RET(0); +} + +static void bdx_setmulti(struct net_device *ndev) +{ + struct bdx_priv *priv = ndev->priv; + + u32 rxf_val = + GMAC_RX_FILTER_AM | GMAC_RX_FILTER_AB | GMAC_RX_FILTER_OSEN; + int i; + + ENTER; + /* IMF - imperfect (hash) rx multicat filter */ + /* PMF - perfect rx multicat filter */ + + /* FIXME: RXE(OFF) */ + if (ndev->flags & IFF_PROMISC) { + rxf_val |= GMAC_RX_FILTER_PRM; + } else if (ndev->flags & IFF_ALLMULTI) { + /* set IMF to accept all multicast frmaes */ + for (i = 0; i < MAC_MCST_HASH_NUM; i++) + WRITE_REG(priv, regRX_MCST_HASH0 + i * 4, ~0); + } else if (ndev->mc_count) { + u8 hash; + struct dev_mc_list *mclist; + u32 reg, val; + + /* set IMF to deny all multicast frames */ + for (i = 0; i < MAC_MCST_HASH_NUM; i++) + WRITE_REG(priv, regRX_MCST_HASH0 + i * 4, 0); + /* set PMF to deny all multicast frames */ + for (i = 0; i < MAC_MCST_NUM; i++) { + WRITE_REG(priv, regRX_MAC_MCST0 + i * 8, 0); + WRITE_REG(priv, regRX_MAC_MCST1 + i * 8, 0); + } + + /* use PMF to accept first MAC_MCST_NUM (15) addresses */ + /* TBD: sort addreses and write them in ascending order + * into RX_MAC_MCST regs. we skip this phase now and accept ALL + * multicast frames throu IMF */ + mclist = ndev->mc_list; + + /* accept the rest of addresses throu IMF */ + for (; mclist; mclist = mclist->next) { + hash = 0; + for (i = 0; i < ETH_ALEN; i++) + hash ^= mclist->dmi_addr[i]; + reg = regRX_MCST_HASH0 + ((hash >> 5) << 2); + val = READ_REG(priv, reg); + val |= (1 << (hash % 32)); + WRITE_REG(priv, reg, val); + } + + } else { + DBG("only own mac %d\n", ndev->mc_count); + rxf_val |= GMAC_RX_FILTER_AB; + } + WRITE_REG(priv, regGMAC_RXF_A, rxf_val); + /* enable RX */ + /* FIXME: RXE(ON) */ + RET(); +} + +static int bdx_set_mac(struct net_device *ndev, void *p) +{ + struct bdx_priv *priv = ndev->priv; + struct sockaddr *addr = p; + + ENTER; + /* + if (netif_running(dev)) + return -EBUSY + */ + memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len); + bdx_restore_mac(ndev, priv); + RET(0); +} + +static int bdx_read_mac(struct bdx_priv *priv) +{ + u16 macAddress[3], i; + ENTER; + + macAddress[2] = READ_REG(priv, regUNC_MAC0_A); + macAddress[2] = READ_REG(priv, regUNC_MAC0_A); + macAddress[1] = READ_REG(priv, regUNC_MAC1_A); + macAddress[1] = READ_REG(priv, regUNC_MAC1_A); + macAddress[0] = READ_REG(priv, regUNC_MAC2_A); + macAddress[0] = READ_REG(priv, regUNC_MAC2_A); + for (i = 0; i < 3; i++) { + priv->ndev->dev_addr[i * 2 + 1] = macAddress[i]; + priv->ndev->dev_addr[i * 2] = macAddress[i] >> 8; + } + RET(0); +} + +static u64 bdx_read_l2stat(struct bdx_priv *priv, int reg) +{ + u64 val; + + val = READ_REG(priv, reg); + val |= ((u64) READ_REG(priv, reg + 8)) << 32; + return val; +} + +/*Do the statistics-update work*/ +static void bdx_update_stats(struct bdx_priv *priv) +{ + struct bdx_stats *stats = &priv->hw_stats; + u64 *stats_vector = (u64 *) stats; + int i; + int addr; + + /*Fill HW structure */ + addr = 0x7200; + /*First 12 statistics - 0x7200 - 0x72B0 */ + for (i = 0; i < 12; i++) { + stats_vector[i] = bdx_read_l2stat(priv, addr); + addr += 0x10; + } + BDX_ASSERT(addr != 0x72C0); + /* 0x72C0-0x72E0 RSRV */ + addr = 0x72F0; + for (; i < 16; i++) { + stats_vector[i] = bdx_read_l2stat(priv, addr); + addr += 0x10; + } + BDX_ASSERT(addr != 0x7330); + /* 0x7330-0x7360 RSRV */ + addr = 0x7370; + for (; i < 19; i++) { + stats_vector[i] = bdx_read_l2stat(priv, addr); + addr += 0x10; + } + BDX_ASSERT(addr != 0x73A0); + /* 0x73A0-0x73B0 RSRV */ + addr = 0x73C0; + for (; i < 23; i++) { + stats_vector[i] = bdx_read_l2stat(priv, addr); + addr += 0x10; + } + BDX_ASSERT(addr != 0x7400); + BDX_ASSERT((sizeof(struct bdx_stats) / sizeof(u64)) != i); +} + +static struct net_device_stats *bdx_get_stats(struct net_device *ndev) +{ + struct bdx_priv *priv = ndev->priv; + struct net_device_stats *net_stat = &priv->net_stats; + return net_stat; +} + +static void print_rxdd(struct rxd_desc *rxdd, u32 rxd_val1, u16 len, + u16 rxd_vlan); +static void print_rxfd(struct rxf_desc *rxfd); + +/************************************************************************* + * Rx DB * + *************************************************************************/ + +static void bdx_rxdb_destroy(struct rxdb *db) +{ + if (db) + vfree(db); +} + +static struct rxdb *bdx_rxdb_create(int nelem) +{ + struct rxdb *db; + int i; + + db = vmalloc(sizeof(struct rxdb) + + (nelem * sizeof(int)) + + (nelem * sizeof(struct rx_map))); + if (likely(db != NULL)) { + db->stack = (int *)(db + 1); + db->elems = (void *)(db->stack + nelem); + db->nelem = nelem; + db->top = nelem; + for (i = 0; i < nelem; i++) + db->stack[i] = nelem - i - 1; /* to make first allocs + close to db struct*/ + } + + return db; +} + +static inline int bdx_rxdb_alloc_elem(struct rxdb *db) +{ + BDX_ASSERT(db->top <= 0); + return db->stack[--(db->top)]; +} + +static inline void *bdx_rxdb_addr_elem(struct rxdb *db, int n) +{ + BDX_ASSERT((n < 0) || (n >= db->nelem)); + return db->elems + n; +} + +static inline int bdx_rxdb_available(struct rxdb *db) +{ + return db->top; +} + +static inline void bdx_rxdb_free_elem(struct rxdb *db, int n) +{ + BDX_ASSERT((n >= db->nelem) || (n < 0)); + db->stack[(db->top)++] = n; +} + +/************************************************************************* + * Rx Init * + *************************************************************************/ + +/* bdx_rx_init - initialize RX all related HW and SW resources + * @priv - NIC private structure + * + * Returns 0 on success, negative value on failure + * + * It creates rxf and rxd fifos, update relevant HW registers, preallocate + * skb for rx. It assumes that Rx is desabled in HW + * funcs are grouped for better cache usage + * + * RxD fifo is smaller then RxF fifo by design. Upon high load, RxD will be + * filled and packets will be dropped by nic without getting into host or + * cousing interrupt. Anyway, in that condition, host has no chance to proccess + * all packets, but dropping in nic is cheaper, since it takes 0 cpu cycles + */ + +/* TBD: ensure proper packet size */ + +static int bdx_rx_init(struct bdx_priv *priv) +{ + ENTER; + BDX_ASSERT(priv == 0); + if (bdx_fifo_init(priv, &priv->rxd_fifo0.m, priv->rxd_size, + regRXD_CFG0_0, regRXD_CFG1_0, + regRXD_RPTR_0, regRXD_WPTR_0)) + goto err_mem; + if (bdx_fifo_init(priv, &priv->rxf_fifo0.m, priv->rxf_size, + regRXF_CFG0_0, regRXF_CFG1_0, + regRXF_RPTR_0, regRXF_WPTR_0)) + goto err_mem; + if (! + (priv->rxdb = + bdx_rxdb_create(priv->rxf_fifo0.m.memsz / + sizeof(struct rxf_desc)))) + goto err_mem; + + priv->rxf_fifo0.m.pktsz = priv->ndev->mtu + VLAN_ETH_HLEN; + return 0; + +err_mem: + ERR("%s: %s: Rx init failed\n", BDX_DRV_NAME, priv->ndev->name); + return -ENOMEM; +} + +/* bdx_rx_free_skbs - frees and unmaps all skbs allocated for the fifo + * @priv - NIC private structure + * @f - RXF fifo + */ +static void bdx_rx_free_skbs(struct bdx_priv *priv, struct rxf_fifo *f) +{ + struct rx_map *dm; + struct rxdb *db = priv->rxdb; + u16 i; + + ENTER; + DBG("total=%d free=%d busy=%d\n", db->nelem, bdx_rxdb_available(db), + db->nelem - bdx_rxdb_available(db)); + while (bdx_rxdb_available(db) > 0) { + i = bdx_rxdb_alloc_elem(db); + dm = bdx_rxdb_addr_elem(db, i); + dm->dma = 0; + } + for (i = 0; i < db->nelem; i++) { + dm = bdx_rxdb_addr_elem(db, i); + if (dm->dma) { + pci_unmap_single(priv->pdev, + dm->dma, f->m.pktsz, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(dm->skb); + } + } +} + +/* bdx_rx_free - release all Rx resources + * @priv - NIC private structure + * It assumes that Rx is desabled in HW + */ +static void bdx_rx_free(struct bdx_priv *priv) +{ + ENTER; + if (priv->rxdb) { + bdx_rx_free_skbs(priv, &priv->rxf_fifo0); + bdx_rxdb_destroy(priv->rxdb); + priv->rxdb = NULL; + } + bdx_fifo_free(priv, &priv->rxf_fifo0.m); + bdx_fifo_free(priv, &priv->rxd_fifo0.m); + + RET(); +} + +/************************************************************************* + * Rx Engine * + *************************************************************************/ + +/* bdx_rx_alloc_skbs - fill rxf fifo with new skbs + * @priv - nic's private structure + * @f - RXF fifo that needs skbs + * It allocates skbs, build rxf descs and push it (rxf descr) into rxf fifo. + * skb's virtual and physical addresses are stored in skb db. + * To calculate free space, func uses cached values of RPTR and WPTR + * When needed, it also updates RPTR and WPTR. + */ + +/* TBD: do not update WPTR if no desc were written */ + +static void bdx_rx_alloc_skbs(struct bdx_priv *priv, struct rxf_fifo *f) +{ + struct sk_buff *skb; + struct rxf_desc *rxfd; + struct rx_map *dm; + int dno, delta, idx; + struct rxdb *db = priv->rxdb; + + ENTER; + dno = bdx_rxdb_available(db) - 1; + while (dno > 0) { + if (!(skb = dev_alloc_skb(f->m.pktsz + NET_IP_ALIGN))) { + ERR("NO MEM: dev_alloc_skb failed\n"); + break; + } + skb->dev = priv->ndev; + skb_reserve(skb, NET_IP_ALIGN); + + idx = bdx_rxdb_alloc_elem(db); + dm = bdx_rxdb_addr_elem(db, idx); + dm->dma = pci_map_single(priv->pdev, + skb->data, f->m.pktsz, + PCI_DMA_FROMDEVICE); + dm->skb = skb; + rxfd = (struct rxf_desc *)(f->m.va + f->m.wptr); + rxfd->info = CPU_CHIP_SWAP32(0x10003); /* INFO=1 BC=3 */ + rxfd->va_lo = idx; + rxfd->pa_lo = CPU_CHIP_SWAP32(L32_64(dm->dma)); + rxfd->pa_hi = CPU_CHIP_SWAP32(H32_64(dm->dma)); + rxfd->len = CPU_CHIP_SWAP32(f->m.pktsz); + print_rxfd(rxfd); + + f->m.wptr += sizeof(struct rxf_desc); + delta = f->m.wptr - f->m.memsz; + if (unlikely(delta >= 0)) { + f->m.wptr = delta; + if (delta > 0) { + memcpy(f->m.va, f->m.va + f->m.memsz, delta); + DBG("wrapped descriptor\n"); + } + } + dno--; + } + /*TBD: to do - delayed rxf wptr like in txd */ + WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR); + RET(); +} + +static inline void +NETIF_RX_MUX(struct bdx_priv *priv, u32 rxd_val1, u16 rxd_vlan, + struct sk_buff *skb) +{ + ENTER; + DBG("rxdd->flags.bits.vtag=%d vlgrp=%p\n", GET_RXD_VTAG(rxd_val1), + priv->vlgrp); + if (priv->vlgrp && GET_RXD_VTAG(rxd_val1)) { + DBG("%s: vlan rcv vlan '%x' vtag '%x', device name '%s'\n", + priv->ndev->name, + GET_RXD_VLAN_ID(rxd_vlan), + GET_RXD_VTAG(rxd_val1), + vlan_group_get_device(priv->vlgrp, + GET_RXD_VLAN_ID(rxd_vlan))->name); + /* NAPI variant of receive functions */ + vlan_hwaccel_receive_skb(skb, priv->vlgrp, + GET_RXD_VLAN_ID(rxd_vlan)); + } else { + netif_receive_skb(skb); + } +} + +static void bdx_recycle_skb(struct bdx_priv *priv, struct rxd_desc *rxdd) +{ + struct rxf_desc *rxfd; + struct rx_map *dm; + struct rxf_fifo *f; + struct rxdb *db; + struct sk_buff *skb; + int delta; + + ENTER; + DBG("priv=%p rxdd=%p\n", priv, rxdd); + f = &priv->rxf_fifo0; + db = priv->rxdb; + DBG("db=%p f=%p\n", db, f); + dm = bdx_rxdb_addr_elem(db, rxdd->va_lo); + DBG("dm=%p\n", dm); + skb = dm->skb; + rxfd = (struct rxf_desc *)(f->m.va + f->m.wptr); + rxfd->info = CPU_CHIP_SWAP32(0x10003); /* INFO=1 BC=3 */ + rxfd->va_lo = rxdd->va_lo; + rxfd->pa_lo = CPU_CHIP_SWAP32(L32_64(dm->dma)); + rxfd->pa_hi = CPU_CHIP_SWAP32(H32_64(dm->dma)); + rxfd->len = CPU_CHIP_SWAP32(f->m.pktsz); + print_rxfd(rxfd); + + f->m.wptr += sizeof(struct rxf_desc); + delta = f->m.wptr - f->m.memsz; + if (unlikely(delta >= 0)) { + f->m.wptr = delta; + if (delta > 0) { + memcpy(f->m.va, f->m.va + f->m.memsz, delta); + DBG("wrapped descriptor\n"); + } + } + RET(); +} + +/* bdx_rx_receive - recieves full packets from RXD fifo and pass them to OS + * NOTE: a special treatment is given to non-continous descriptors + * that start near the end, wraps around and continue at the beginning. a second + * part is copied right after the first, and then descriptor is interpreted as + * normal. fifo has an extra space to allow such operations + * @priv - nic's private structure + * @f - RXF fifo that needs skbs + */ + +/* TBD: replace memcpy func call by explicite inline asm */ + +static int bdx_rx_receive(struct bdx_priv *priv, struct rxd_fifo *f, int budget) +{ + struct sk_buff *skb, *skb2; + struct rxd_desc *rxdd; + struct rx_map *dm; + struct rxf_fifo *rxf_fifo; + int tmp_len, size; + int done = 0; + int max_done = BDX_MAX_RX_DONE; + struct rxdb *db = NULL; + /* Unmarshalled descriptor - copy of descriptor in host order */ + u32 rxd_val1; + u16 len; + u16 rxd_vlan; + + ENTER; + max_done = budget; + + priv->ndev->last_rx = jiffies; + f->m.wptr = READ_REG(priv, f->m.reg_WPTR) & TXF_WPTR_WR_PTR; + + size = f->m.wptr - f->m.rptr; + if (size < 0) + size = f->m.memsz + size; /* size is negative :-) */ + + while (size > 0) { + + rxdd = (struct rxd_desc *)(f->m.va + f->m.rptr); + rxd_val1 = CPU_CHIP_SWAP32(rxdd->rxd_val1); + + len = CPU_CHIP_SWAP16(rxdd->len); + + rxd_vlan = CPU_CHIP_SWAP16(rxdd->rxd_vlan); + + print_rxdd(rxdd, rxd_val1, len, rxd_vlan); + + tmp_len = GET_RXD_BC(rxd_val1) << 3; + BDX_ASSERT(tmp_len <= 0); + size -= tmp_len; + if (size < 0) /* test for partially arrived descriptor */ + break; + + f->m.rptr += tmp_len; + + tmp_len = f->m.rptr - f->m.memsz; + if (unlikely(tmp_len >= 0)) { + f->m.rptr = tmp_len; + if (tmp_len > 0) { + DBG("wrapped desc rptr=%d tmp_len=%d\n", + f->m.rptr, tmp_len); + memcpy(f->m.va + f->m.memsz, f->m.va, tmp_len); + } + } + + if (unlikely(GET_RXD_ERR(rxd_val1))) { + DBG("rxd_err = 0x%x\n", GET_RXD_ERR(rxd_val1)); + priv->net_stats.rx_errors++; + bdx_recycle_skb(priv, rxdd); + continue; + } + + rxf_fifo = &priv->rxf_fifo0; + db = priv->rxdb; + dm = bdx_rxdb_addr_elem(db, rxdd->va_lo); + skb = dm->skb; + + if (len < BDX_COPYBREAK && + (skb2 = dev_alloc_skb(len + NET_IP_ALIGN))) { + skb_reserve(skb2, NET_IP_ALIGN); + /*skb_put(skb2, len); */ + pci_dma_sync_single_for_cpu(priv->pdev, + dm->dma, rxf_fifo->m.pktsz, + PCI_DMA_FROMDEVICE); + memcpy(skb2->data, skb->data, len); + bdx_recycle_skb(priv, rxdd); + skb = skb2; + } else { + pci_unmap_single(priv->pdev, + dm->dma, rxf_fifo->m.pktsz, + PCI_DMA_FROMDEVICE); + bdx_rxdb_free_elem(db, rxdd->va_lo); + } + + priv->net_stats.rx_bytes += len; + + skb_put(skb, len); + skb->dev = priv->ndev; + skb->ip_summed = CHECKSUM_UNNECESSARY; + skb->protocol = eth_type_trans(skb, priv->ndev); + + /* Non-IP packets aren't checksum-offloaded */ + if (GET_RXD_PKT_ID(rxd_val1) == 0) + skb->ip_summed = CHECKSUM_NONE; + + NETIF_RX_MUX(priv, rxd_val1, rxd_vlan, skb); + + if (++done >= max_done) + break; + } + + priv->net_stats.rx_packets += done; + + /* FIXME: do smth to minimize pci accesses */ + WRITE_REG(priv, f->m.reg_RPTR, f->m.rptr & TXF_WPTR_WR_PTR); + + bdx_rx_alloc_skbs(priv, &priv->rxf_fifo0); + + RET(done); +} + +/************************************************************************* + * Debug / Temprorary Code * + *************************************************************************/ +static void print_rxdd(struct rxd_desc *rxdd, u32 rxd_val1, u16 len, + u16 rxd_vlan) +{ + DBG("ERROR: rxdd bc %d rxfq %d to %d type %d err %d rxp %d " + "pkt_id %d vtag %d len %d vlan_id %d cfi %d prio %d " + "va_lo %d va_hi %d\n", + GET_RXD_BC(rxd_val1), GET_RXD_RXFQ(rxd_val1), GET_RXD_TO(rxd_val1), + GET_RXD_TYPE(rxd_val1), GET_RXD_ERR(rxd_val1), + GET_RXD_RXP(rxd_val1), GET_RXD_PKT_ID(rxd_val1), + GET_RXD_VTAG(rxd_val1), len, GET_RXD_VLAN_ID(rxd_vlan), + GET_RXD_CFI(rxd_vlan), GET_RXD_PRIO(rxd_vlan), rxdd->va_lo, + rxdd->va_hi); +} + +static void print_rxfd(struct rxf_desc *rxfd) +{ + DBG("=== RxF desc CHIP ORDER/ENDIANESS =============\n" + "info 0x%x va_lo %u pa_lo 0x%x pa_hi 0x%x len 0x%x\n", + rxfd->info, rxfd->va_lo, rxfd->pa_lo, rxfd->pa_hi, rxfd->len); +} + +/* + * TX HW/SW interaction overview + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * There are 2 types of TX communication channels betwean driver and NIC. + * 1) TX Free Fifo - TXF - holds ack descriptors for sent packets + * 2) TX Data Fifo - TXD - holds descriptors of full buffers. + * + * Currently NIC supports TSO, checksuming and gather DMA + * UFO and IP fragmentation is on the way + * + * RX SW Data Structures + * ~~~~~~~~~~~~~~~~~~~~~ + * txdb - used to keep track of all skbs owned by SW and their dma addresses. + * For TX case, ownership lasts from geting packet via hard_xmit and until HW + * acknowledges sent by TXF descriptors. + * Implemented as cyclic buffer. + * fifo - keeps info about fifo's size and location, relevant HW registers, + * usage and skb db. Each RXD and RXF Fifo has its own fifo structure. + * Implemented as simple struct. + * + * TX SW Execution Flow + * ~~~~~~~~~~~~~~~~~~~~ + * OS calls driver's hard_xmit method with packet to sent. + * Driver creates DMA mappings, builds TXD descriptors and kicks HW + * by updating TXD WPTR. + * When packet is sent, HW write us TXF descriptor and SW frees original skb. + * To prevent TXD fifo overflow without reading HW registers every time, + * SW deploys "tx level" technique. + * Upon strart up, tx level is initialized to TXD fifo length. + * For every sent packet, SW gets its TXD descriptor sizei + * (from precalculated array) and substructs it from tx level. + * The size is also stored in txdb. When TXF ack arrives, SW fetch size of + * original TXD descriptor from txdb and adds it to tx level. + * When Tx level drops under some predefined treshhold, the driver + * stops the TX queue. When TX level rises above that level, + * the tx queue is enabled again. + * + * This technique avoids eccessive reading of RPTR and WPTR registers. + * As our benchmarks shows, it adds 1.5 Gbit/sec to NIS's throuput. + */ + +/************************************************************************* + * Tx DB * + *************************************************************************/ +static inline int bdx_tx_db_size(struct txdb *db) +{ + int taken = db->wptr - db->rptr; + if (taken < 0) + taken = db->size + 1 + taken; /* (size + 1) equals memsz */ + + return db->size - taken; +} + +/* __bdx_tx_ptr_next - helper function, increment read/write pointer + wrap + * @d - tx data base + * @ptr - read or write pointer + */ +static inline void __bdx_tx_db_ptr_next(struct txdb *db, struct tx_map **pptr) +{ + BDX_ASSERT(db == NULL || pptr == NULL); /* sanity */ + + BDX_ASSERT(*pptr != db->rptr && /* expect either read */ + *pptr != db->wptr); /* or write pointer */ + + BDX_ASSERT(*pptr < db->start || /* pointer has to be */ + *pptr >= db->end); /* in range */ + + ++*pptr; + if (unlikely(*pptr == db->end)) + *pptr = db->start; +} + +/* bdx_tx_db_inc_rptr - increment read pointer + * @d - tx data base + */ +static inline void bdx_tx_db_inc_rptr(struct txdb *db) +{ + BDX_ASSERT(db->rptr == db->wptr); /* can't read from empty db */ + __bdx_tx_db_ptr_next(db, &db->rptr); +} + +/* bdx_tx_db_inc_rptr - increment write pointer + * @d - tx data base + */ +static inline void bdx_tx_db_inc_wptr(struct txdb *db) +{ + __bdx_tx_db_ptr_next(db, &db->wptr); + BDX_ASSERT(db->rptr == db->wptr); /* we can not get empty db as + a result of write */ +} + +/* bdx_tx_db_init - creates and initializes tx db + * @d - tx data base + * @sz_type - size of tx fifo + * Returns 0 on success, error code otherwise + */ +static int bdx_tx_db_init(struct txdb *d, int sz_type) +{ + int memsz = FIFO_SIZE * (1 << (sz_type + 1)); + + d->start = vmalloc(memsz); + if (!d->start) + return -ENOMEM; + + /* + * In order to differentiate between db is empty and db is full + * states at least one element should always be empty in order to + * avoid rptr == wptr which means db is empty + */ + d->size = memsz / sizeof(struct tx_map) - 1; + d->end = d->start + d->size + 1; /* just after last element */ + + /* all dbs are created equally empty */ + d->rptr = d->start; + d->wptr = d->start; + + return 0; +} + +/* bdx_tx_db_close - closes tx db and frees all memory + * @d - tx data base + */ +static void bdx_tx_db_close(struct txdb *d) +{ + BDX_ASSERT(d == NULL); + + if (d->start) { + vfree(d->start); + d->start = NULL; + } +} + +/************************************************************************* + * Tx Engine * + *************************************************************************/ + +/* sizes of tx desc (including padding if needed) as function + * of skb's frag number */ +static struct { + u16 bytes; + u16 qwords; /* qword = 64 bit */ +} txd_sizes[MAX_SKB_FRAGS + 1]; + +/* txdb_map_skb - creates and stores dma mappings for skb's data blocks + * @priv - NIC private structure + * @skb - socket buffer to map + * + * It makes dma mappings for skb's data blocks and writes them to PBL of + * new tx descriptor. It also stores them in the tx db, so they could be + * unmaped after data was sent. It is reponsibility of a caller to make + * sure that there is enough space in the tx db. Last element holds pointer + * to skb itself and marked with zero length + */ +static inline void +bdx_tx_map_skb(struct bdx_priv *priv, struct sk_buff *skb, + struct txd_desc *txdd) +{ + struct txdb *db = &priv->txdb; + struct pbl *pbl = &txdd->pbl[0]; + int nr_frags = skb_shinfo(skb)->nr_frags; + int i; + + db->wptr->len = skb->len - skb->data_len; + db->wptr->addr.dma = pci_map_single(priv->pdev, skb->data, + db->wptr->len, PCI_DMA_TODEVICE); + pbl->len = CPU_CHIP_SWAP32(db->wptr->len); + pbl->pa_lo = CPU_CHIP_SWAP32(L32_64(db->wptr->addr.dma)); + pbl->pa_hi = CPU_CHIP_SWAP32(H32_64(db->wptr->addr.dma)); + DBG("=== pbl len: 0x%x ================\n", pbl->len); + DBG("=== pbl pa_lo: 0x%x ================\n", pbl->pa_lo); + DBG("=== pbl pa_hi: 0x%x ================\n", pbl->pa_hi); + bdx_tx_db_inc_wptr(db); + + for (i = 0; i < nr_frags; i++) { + struct skb_frag_struct *frag; + + frag = &skb_shinfo(skb)->frags[i]; + db->wptr->len = frag->size; + db->wptr->addr.dma = + pci_map_page(priv->pdev, frag->page, frag->page_offset, + frag->size, PCI_DMA_TODEVICE); + + pbl++; + pbl->len = CPU_CHIP_SWAP32(db->wptr->len); + pbl->pa_lo = CPU_CHIP_SWAP32(L32_64(db->wptr->addr.dma)); + pbl->pa_hi = CPU_CHIP_SWAP32(H32_64(db->wptr->addr.dma)); + bdx_tx_db_inc_wptr(db); + } + + /* add skb clean up info. */ + db->wptr->len = -txd_sizes[nr_frags].bytes; + db->wptr->addr.skb = skb; + bdx_tx_db_inc_wptr(db); +} + +/* init_txd_sizes - precalculate sizes of descriptors for skbs up to 16 frags + * number of frags is used as index to fetch correct descriptors size, + * instead of calculating it each time */ +static void __init init_txd_sizes(void) +{ + int i, lwords; + + /* 7 - is number of lwords in txd with one phys buffer + * 3 - is number of lwords used for every additional phys buffer */ + for (i = 0; i < MAX_SKB_FRAGS + 1; i++) { + lwords = 7 + (i * 3); + if (lwords & 1) + lwords++; /* pad it with 1 lword */ + txd_sizes[i].qwords = lwords >> 1; + txd_sizes[i].bytes = lwords << 2; + } +} + +/* bdx_tx_init - initialize all Tx related stuff. + * Namely, TXD and TXF fifos, database etc */ +static int bdx_tx_init(struct bdx_priv *priv) +{ + if (bdx_fifo_init(priv, &priv->txd_fifo0.m, priv->txd_size, + regTXD_CFG0_0, + regTXD_CFG1_0, regTXD_RPTR_0, regTXD_WPTR_0)) + goto err_mem; + if (bdx_fifo_init(priv, &priv->txf_fifo0.m, priv->txf_size, + regTXF_CFG0_0, + regTXF_CFG1_0, regTXF_RPTR_0, regTXF_WPTR_0)) + goto err_mem; + + /* The TX db has to keep mappings for all packets sent (on TxD) + * and not yet reclaimed (on TxF) */ + if (bdx_tx_db_init(&priv->txdb, max(priv->txd_size, priv->txf_size))) + goto err_mem; + + priv->tx_level = BDX_MAX_TX_LEVEL; +#ifdef BDX_DELAY_WPTR + priv->tx_update_mark = priv->tx_level - 1024; +#endif + return 0; + +err_mem: + ERR("tehuti: %s: Tx init failed\n", priv->ndev->name); + return -ENOMEM; +} + +/* + * bdx_tx_space - calculates avalable space in TX fifo + * @priv - NIC private structure + * Returns avaliable space in TX fifo in bytes + */ +static inline int bdx_tx_space(struct bdx_priv *priv) +{ + struct txd_fifo *f = &priv->txd_fifo0; + int fsize; + + f->m.rptr = READ_REG(priv, f->m.reg_RPTR) & TXF_WPTR_WR_PTR; + fsize = f->m.rptr - f->m.wptr; + if (fsize <= 0) + fsize = f->m.memsz + fsize; + return (fsize); +} + +/* bdx_tx_transmit - send packet to NIC + * @skb - packet to send + * ndev - network device assigned to NIC + * Return codes: + * o NETDEV_TX_OK everything ok. + * o NETDEV_TX_BUSY Cannot transmit packet, try later + * Usually a bug, means queue start/stop flow control is broken in + * the driver. Note: the driver must NOT put the skb in its DMA ring. + * o NETDEV_TX_LOCKED Locking failed, please retry quickly. + */ +static int bdx_tx_transmit(struct sk_buff *skb, struct net_device *ndev) +{ + struct bdx_priv *priv = ndev->priv; + struct txd_fifo *f = &priv->txd_fifo0; + int txd_checksum = 7; /* full checksum */ + int txd_lgsnd = 0; + int txd_vlan_id = 0; + int txd_vtag = 0; + int txd_mss = 0; + + int nr_frags = skb_shinfo(skb)->nr_frags; + struct txd_desc *txdd; + int len; + unsigned long flags; + + ENTER; + local_irq_save(flags); + if (!spin_trylock(&priv->tx_lock)) { + local_irq_restore(flags); + DBG("%s[%s]: TX locked, returning NETDEV_TX_LOCKED\n", + BDX_DRV_NAME, ndev->name); + return NETDEV_TX_LOCKED; + } + + /* build tx descriptor */ + BDX_ASSERT(f->m.wptr >= f->m.memsz); /* started with valid wptr */ + txdd = (struct txd_desc *)(f->m.va + f->m.wptr); + if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) + txd_checksum = 0; + + if (skb_shinfo(skb)->gso_size) { + txd_mss = skb_shinfo(skb)->gso_size; + txd_lgsnd = 1; + DBG("skb %p skb len %d gso size = %d\n", skb, skb->len, + txd_mss); + } + + if (vlan_tx_tag_present(skb)) { + /*Cut VLAN ID to 12 bits */ + txd_vlan_id = vlan_tx_tag_get(skb) & BITS_MASK(12); + txd_vtag = 1; + } + + txdd->length = CPU_CHIP_SWAP16(skb->len); + txdd->mss = CPU_CHIP_SWAP16(txd_mss); + txdd->txd_val1 = + CPU_CHIP_SWAP32(TXD_W1_VAL + (txd_sizes[nr_frags].qwords, txd_checksum, txd_vtag, + txd_lgsnd, txd_vlan_id)); + DBG("=== TxD desc =====================\n"); + DBG("=== w1: 0x%x ================\n", txdd->txd_val1); + DBG("=== w2: mss 0x%x len 0x%x\n", txdd->mss, txdd->length); + + bdx_tx_map_skb(priv, skb, txdd); + + /* increment TXD write pointer. In case of + fifo wrapping copy reminder of the descriptor + to the beginning */ + f->m.wptr += txd_sizes[nr_frags].bytes; + len = f->m.wptr - f->m.memsz; + if (unlikely(len >= 0)) { + f->m.wptr = len; + if (len > 0) { + BDX_ASSERT(len > f->m.memsz); + memcpy(f->m.va, f->m.va + f->m.memsz, len); + } + } + BDX_ASSERT(f->m.wptr >= f->m.memsz); /* finished with valid wptr */ + + priv->tx_level -= txd_sizes[nr_frags].bytes; + BDX_ASSERT(priv->tx_level <= 0 || priv->tx_level > BDX_MAX_TX_LEVEL); +#ifdef BDX_DELAY_WPTR + if (priv->tx_level > priv->tx_update_mark) { + /* Force memory writes to complete before letting h/w + know there are new descriptors to fetch. + (might be needed on platforms like IA64) + wmb(); */ + WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR); + } else { + if (priv->tx_noupd++ > BDX_NO_UPD_PACKETS) { + priv->tx_noupd = 0; + WRITE_REG(priv, f->m.reg_WPTR, + f->m.wptr & TXF_WPTR_WR_PTR); + } + } +#else + /* Force memory writes to complete before letting h/w + know there are new descriptors to fetch. + (might be needed on platforms like IA64) + wmb(); */ + WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR); + +#endif + ndev->trans_start = jiffies; + + priv->net_stats.tx_packets++; + priv->net_stats.tx_bytes += skb->len; + + if (priv->tx_level < BDX_MIN_TX_LEVEL) { + DBG("%s: %s: TX Q STOP level %d\n", + BDX_DRV_NAME, ndev->name, priv->tx_level); + netif_stop_queue(ndev); + } + + spin_unlock_irqrestore(&priv->tx_lock, flags); + return NETDEV_TX_OK; +} + +/* bdx_tx_cleanup - clean TXF fifo, run in the context of IRQ. + * @priv - bdx adapter + * It scans TXF fifo for descriptors, frees DMA mappings and reports to OS + * that those packets were sent + */ +static void bdx_tx_cleanup(struct bdx_priv *priv) +{ + struct txf_fifo *f = &priv->txf_fifo0; + struct txdb *db = &priv->txdb; + int tx_level = 0; + + ENTER; + f->m.wptr = READ_REG(priv, f->m.reg_WPTR) & TXF_WPTR_MASK; + BDX_ASSERT(f->m.rptr >= f->m.memsz); /* started with valid rptr */ + + while (f->m.wptr != f->m.rptr) { + f->m.rptr += BDX_TXF_DESC_SZ; + f->m.rptr &= f->m.size_mask; + + /* unmap all the fragments */ + /* first has to come tx_maps containing dma */ + BDX_ASSERT(db->rptr->len == 0); + do { + BDX_ASSERT(db->rptr->addr.dma == 0); + pci_unmap_page(priv->pdev, db->rptr->addr.dma, + db->rptr->len, PCI_DMA_TODEVICE); + bdx_tx_db_inc_rptr(db); + } while (db->rptr->len > 0); + tx_level -= db->rptr->len; /* '-' koz len is negative */ + + /* now should come skb pointer - free it */ + BDX_ASSERT(db->rptr->addr.skb == 0); + dev_kfree_skb_irq(db->rptr->addr.skb); + bdx_tx_db_inc_rptr(db); + } + + /* let h/w know which TXF descriptors were cleaned */ + BDX_ASSERT((f->m.wptr & TXF_WPTR_WR_PTR) >= f->m.memsz); + WRITE_REG(priv, f->m.reg_RPTR, f->m.rptr & TXF_WPTR_WR_PTR); + + /* We reclaimed resources, so in case the Q is stopped by xmit callback, + * we resume the transmition and use tx_lock to synchronize with xmit.*/ + spin_lock(&priv->tx_lock); + priv->tx_level += tx_level; + BDX_ASSERT(priv->tx_level <= 0 || priv->tx_level > BDX_MAX_TX_LEVEL); +#ifdef BDX_DELAY_WPTR + if (priv->tx_noupd) { + priv->tx_noupd = 0; + WRITE_REG(priv, priv->txd_fifo0.m.reg_WPTR, + priv->txd_fifo0.m.wptr & TXF_WPTR_WR_PTR); + } +#endif + + if (unlikely(netif_queue_stopped(priv->ndev) + && netif_carrier_ok(priv->ndev) + && (priv->tx_level >= BDX_MIN_TX_LEVEL))) { + DBG("%s: %s: TX Q WAKE level %d\n", + BDX_DRV_NAME, priv->ndev->name, priv->tx_level); + netif_wake_queue(priv->ndev); + } + spin_unlock(&priv->tx_lock); +} + +/* bdx_tx_free_skbs - frees all skbs from TXD fifo. + * It gets called when OS stops this dev, eg upon "ifconfig down" or rmmod + */ +static void bdx_tx_free_skbs(struct bdx_priv *priv) +{ + struct txdb *db = &priv->txdb; + + ENTER; + while (db->rptr != db->wptr) { + if (likely(db->rptr->len)) + pci_unmap_page(priv->pdev, db->rptr->addr.dma, + db->rptr->len, PCI_DMA_TODEVICE); + else + dev_kfree_skb(db->rptr->addr.skb); + bdx_tx_db_inc_rptr(db); + } + RET(); +} + +/* bdx_tx_free - frees all Tx resources */ +static void bdx_tx_free(struct bdx_priv *priv) +{ + ENTER; + bdx_tx_free_skbs(priv); + bdx_fifo_free(priv, &priv->txd_fifo0.m); + bdx_fifo_free(priv, &priv->txf_fifo0.m); + bdx_tx_db_close(&priv->txdb); +} + +/* bdx_tx_push_desc - push descriptor to TxD fifo + * @priv - NIC private structure + * @data - desc's data + * @size - desc's size + * + * Pushes desc to TxD fifo and overlaps it if needed. + * NOTE: this func does not check for available space. this is responsibility + * of the caller. Neither does it check that data size is smaller then + * fifo size. + */ +static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size) +{ + struct txd_fifo *f = &priv->txd_fifo0; + int i = f->m.memsz - f->m.wptr; + + if (size == 0) + return; + + if (i > size) { + memcpy(f->m.va + f->m.wptr, data, size); + f->m.wptr += size; + } else { + memcpy(f->m.va + f->m.wptr, data, i); + f->m.wptr = size - i; + memcpy(f->m.va, data + i, f->m.wptr); + } + WRITE_REG(priv, f->m.reg_WPTR, f->m.wptr & TXF_WPTR_WR_PTR); +} + +/* bdx_tx_push_desc_safe - push descriptor to TxD fifo in a safe way + * @priv - NIC private structure + * @data - desc's data + * @size - desc's size + * + * NOTE: this func does check for available space and, if neccessary, waits for + * NIC to read existing data before writing new one. + */ +static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size) +{ + int timer = 0; + ENTER; + + while (size > 0) { + /* we substruct 8 because when fifo is full rptr == wptr + which also means that fifo is empty, we can understand + the difference, but could hw do the same ??? :) */ + int avail = bdx_tx_space(priv) - 8; + if (avail <= 0) { + if (timer++ > 300) { /* prevent endless loop */ + DBG("timeout while writing desc to TxD fifo\n"); + break; + } + udelay(50); /* give hw a chance to clean fifo */ + continue; + } + avail = MIN(avail, size); + DBG("about to push %d bytes starting %p size %d\n", avail, + data, size); + bdx_tx_push_desc(priv, data, avail); + size -= avail; + data += avail; + } + RET(); +} + +/** + * bdx_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in bdx_pci_tbl + * + * Returns 0 on success, negative on failure + * + * bdx_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + * + * functions and their order used as explained in + * /usr/src/linux/Documentation/DMA-{API,mapping}.txt + * + */ + +/* TBD: netif_msg should be checked and implemented. I disable it for now */ +static int __devinit +bdx_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct net_device *ndev; + struct bdx_priv *priv; + int err, pci_using_dac, port; + unsigned long pciaddr; + u32 regionSize; + struct pci_nic *nic; + + ENTER; + + nic = vmalloc(sizeof(*nic)); + if (!nic) + RET(-ENOMEM); + + /************** pci *****************/ + if ((err = pci_enable_device(pdev))) /* it trigers interrupt, dunno why. */ + RET(err); /* it's not a problem though */ + + if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) && + !(err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))) { + pci_using_dac = 1; + } else { + if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) || + (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) { + printk(KERN_ERR "tehuti: No usable DMA configuration" + ", aborting\n"); + goto err_dma; + } + pci_using_dac = 0; + } + + if ((err = pci_request_regions(pdev, BDX_DRV_NAME))) + goto err_dma; + + pci_set_master(pdev); + + pciaddr = pci_resource_start(pdev, 0); + if (!pciaddr) { + err = -EIO; + ERR("tehuti: no MMIO resource\n"); + goto err_out_res; + } + if ((regionSize = pci_resource_len(pdev, 0)) < BDX_REGS_SIZE) { + err = -EIO; + ERR("tehuti: MMIO resource (%x) too small\n", regionSize); + goto err_out_res; + } + + nic->regs = ioremap(pciaddr, regionSize); + if (!nic->regs) { + err = -EIO; + ERR("tehuti: ioremap failed\n"); + goto err_out_res; + } + + if (pdev->irq < 2) { + err = -EIO; + ERR("tehuti: invalid irq (%d)\n", pdev->irq); + goto err_out_iomap; + } + pci_set_drvdata(pdev, nic); + + if (pdev->device == 0x3014) + nic->port_num = 2; + else + nic->port_num = 1; + + print_hw_id(pdev); + + bdx_hw_reset_direct(nic->regs); + + nic->irq_type = IRQ_INTX; +#ifdef BDX_MSI + if ((readl(nic->regs + FPGA_VER) & 0xFFF) >= 378) { + if ((err = pci_enable_msi(pdev))) + ERR("Tehuti: Can't eneble msi. error is %d\n", err); + else + nic->irq_type = IRQ_MSI; + } else + DBG("HW does not support MSI\n"); +#endif + + /************** netdev **************/ + for (port = 0; port < nic->port_num; port++) { + if (!(ndev = alloc_etherdev(sizeof(struct bdx_priv)))) { + err = -ENOMEM; + printk(KERN_ERR "tehuti: alloc_etherdev failed\n"); + goto err_out_iomap; + } + + ndev->open = bdx_open; + ndev->stop = bdx_close; + ndev->hard_start_xmit = bdx_tx_transmit; + ndev->do_ioctl = bdx_ioctl; + ndev->set_multicast_list = bdx_setmulti; + ndev->get_stats = bdx_get_stats; + ndev->change_mtu = bdx_change_mtu; + ndev->set_mac_address = bdx_set_mac; + ndev->tx_queue_len = BDX_NDEV_TXQ_LEN; + ndev->vlan_rx_register = bdx_vlan_rx_register; + ndev->vlan_rx_add_vid = bdx_vlan_rx_add_vid; + ndev->vlan_rx_kill_vid = bdx_vlan_rx_kill_vid; + + bdx_ethtool_ops(ndev); /* ethtool interface */ + + /* these fields are used for info purposes only + * so we can have them same for all ports of the board */ + ndev->if_port = port; + ndev->base_addr = pciaddr; + ndev->mem_start = pciaddr; + ndev->mem_end = pciaddr + regionSize; + ndev->irq = pdev->irq; + ndev->features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO + | NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | + NETIF_F_HW_VLAN_FILTER + /*| NETIF_F_FRAGLIST */ + ; + + if (pci_using_dac) + ndev->features |= NETIF_F_HIGHDMA; + + /************** priv ****************/ + priv = nic->priv[port] = ndev->priv; + + memset(priv, 0, sizeof(struct bdx_priv)); + priv->pBdxRegs = nic->regs + port * 0x8000; + priv->port = port; + priv->pdev = pdev; + priv->ndev = ndev; + priv->nic = nic; + priv->msg_enable = BDX_DEF_MSG_ENABLE; + + netif_napi_add(ndev, &priv->napi, bdx_poll, 64); + + if ((readl(nic->regs + FPGA_VER) & 0xFFF) == 308) { + DBG("HW statistics not supported\n"); + priv->stats_flag = 0; + } else { + priv->stats_flag = 1; + } + + /* Initialize fifo sizes. */ + priv->txd_size = 2; + priv->txf_size = 2; + priv->rxd_size = 2; + priv->rxf_size = 3; + + /* Initialize the initial coalescing registers. */ + priv->rdintcm = INT_REG_VAL(0x20, 1, 4, 12); + priv->tdintcm = INT_REG_VAL(0x20, 1, 0, 12); + + /* ndev->xmit_lock spinlock is not used. + * Private priv->tx_lock is used for synchronization + * between transmit and TX irq cleanup. In addition + * set multicast list callback has to use priv->tx_lock. + */ +#ifdef BDX_LLTX + ndev->features |= NETIF_F_LLTX; +#endif + spin_lock_init(&priv->tx_lock); + + /*bdx_hw_reset(priv); */ + if (bdx_read_mac(priv)) { + printk(KERN_ERR "tehuti: load MAC address failed\n"); + goto err_out_iomap; + } + SET_NETDEV_DEV(ndev, &pdev->dev); + if ((err = register_netdev(ndev))) { + printk(KERN_ERR "tehuti: register_netdev failed\n"); + goto err_out_free; + } + netif_carrier_off(ndev); + netif_stop_queue(ndev); + + print_eth_id(ndev); + } + RET(0); + +err_out_free: + free_netdev(ndev); +err_out_iomap: + iounmap(nic->regs); +err_out_res: + pci_release_regions(pdev); +err_dma: + pci_disable_device(pdev); + vfree(nic); + + RET(err); +} + +/****************** Ethtool interface *********************/ +/* get strings for tests */ +static const char + bdx_test_names[][ETH_GSTRING_LEN] = { + "No tests defined" +}; + +/* get strings for statistics counters */ +static const char + bdx_stat_names[][ETH_GSTRING_LEN] = { + "InUCast", /* 0x7200 */ + "InMCast", /* 0x7210 */ + "InBCast", /* 0x7220 */ + "InPkts", /* 0x7230 */ + "InErrors", /* 0x7240 */ + "InDropped", /* 0x7250 */ + "FrameTooLong", /* 0x7260 */ + "FrameSequenceErrors", /* 0x7270 */ + "InVLAN", /* 0x7280 */ + "InDroppedDFE", /* 0x7290 */ + "InDroppedIntFull", /* 0x72A0 */ + "InFrameAlignErrors", /* 0x72B0 */ + + /* 0x72C0-0x72E0 RSRV */ + + "OutUCast", /* 0x72F0 */ + "OutMCast", /* 0x7300 */ + "OutBCast", /* 0x7310 */ + "OutPkts", /* 0x7320 */ + + /* 0x7330-0x7360 RSRV */ + + "OutVLAN", /* 0x7370 */ + "InUCastOctects", /* 0x7380 */ + "OutUCastOctects", /* 0x7390 */ + + /* 0x73A0-0x73B0 RSRV */ + + "InBCastOctects", /* 0x73C0 */ + "OutBCastOctects", /* 0x73D0 */ + "InOctects", /* 0x73E0 */ + "OutOctects", /* 0x73F0 */ +}; + +/* + * bdx_get_settings - get device-specific settings + * @netdev + * @ecmd + */ +static int bdx_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) +{ + u32 rdintcm; + u32 tdintcm; + struct bdx_priv *priv = netdev->priv; + + rdintcm = priv->rdintcm; + tdintcm = priv->tdintcm; + + ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE); + ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE); + ecmd->speed = SPEED_10000; + ecmd->duplex = DUPLEX_FULL; + ecmd->port = PORT_FIBRE; + ecmd->transceiver = XCVR_EXTERNAL; /* what does it mean? */ + ecmd->autoneg = AUTONEG_DISABLE; + + /* PCK_TH measures in multiples of FIFO bytes + We translate to packets */ + ecmd->maxtxpkt = + ((GET_PCK_TH(tdintcm) * PCK_TH_MULT) / BDX_TXF_DESC_SZ); + ecmd->maxrxpkt = + ((GET_PCK_TH(rdintcm) * PCK_TH_MULT) / sizeof(struct rxf_desc)); + + return 0; +} + +/* + * bdx_get_drvinfo - report driver information + * @netdev + * @drvinfo + */ +static void +bdx_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo) +{ + struct bdx_priv *priv = netdev->priv; + + strncat(drvinfo->driver, BDX_DRV_NAME, sizeof(drvinfo->driver)); + strncat(drvinfo->version, BDX_DRV_VERSION, sizeof(drvinfo->version)); + strncat(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); + strncat(drvinfo->bus_info, pci_name(priv->pdev), + sizeof(drvinfo->bus_info)); + + drvinfo->n_stats = ((priv->stats_flag) ? + (sizeof(bdx_stat_names) / ETH_GSTRING_LEN) : 0); + drvinfo->testinfo_len = 0; + drvinfo->regdump_len = 0; + drvinfo->eedump_len = 0; +} + +/* + * bdx_get_rx_csum - report whether receive checksums are turned on or off + * @netdev + */ +static u32 bdx_get_rx_csum(struct net_device *netdev) +{ + return 1; /* always on */ +} + +/* + * bdx_get_tx_csum - report whether transmit checksums are turned on or off + * @netdev + */ +static u32 bdx_get_tx_csum(struct net_device *netdev) +{ + return (netdev->features & NETIF_F_IP_CSUM) != 0; +} + +/* + * bdx_get_coalesce - get interrupt coalescing parameters + * @netdev + * @ecoal + */ +static int +bdx_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *ecoal) +{ + u32 rdintcm; + u32 tdintcm; + struct bdx_priv *priv = netdev->priv; + + rdintcm = priv->rdintcm; + tdintcm = priv->tdintcm; + + /* PCK_TH measures in multiples of FIFO bytes + We translate to packets */ + ecoal->rx_coalesce_usecs = GET_INT_COAL(rdintcm) * INT_COAL_MULT; + ecoal->rx_max_coalesced_frames = + ((GET_PCK_TH(rdintcm) * PCK_TH_MULT) / sizeof(struct rxf_desc)); + + ecoal->tx_coalesce_usecs = GET_INT_COAL(tdintcm) * INT_COAL_MULT; + ecoal->tx_max_coalesced_frames = + ((GET_PCK_TH(tdintcm) * PCK_TH_MULT) / BDX_TXF_DESC_SZ); + + /* adaptive parameters ignored */ + return 0; +} + +/* + * bdx_set_coalesce - set interrupt coalescing parameters + * @netdev + * @ecoal + */ +static int +bdx_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ecoal) +{ + u32 rdintcm; + u32 tdintcm; + struct bdx_priv *priv = netdev->priv; + int rx_coal; + int tx_coal; + int rx_max_coal; + int tx_max_coal; + + /* Check for valid input */ + rx_coal = ecoal->rx_coalesce_usecs / INT_COAL_MULT; + tx_coal = ecoal->tx_coalesce_usecs / INT_COAL_MULT; + rx_max_coal = ecoal->rx_max_coalesced_frames; + tx_max_coal = ecoal->tx_max_coalesced_frames; + + /* Translate from packets to multiples of FIFO bytes */ + rx_max_coal = + (((rx_max_coal * sizeof(struct rxf_desc)) + PCK_TH_MULT - 1) + / PCK_TH_MULT); + tx_max_coal = + (((tx_max_coal * BDX_TXF_DESC_SZ) + PCK_TH_MULT - 1) + / PCK_TH_MULT); + + if ((rx_coal > 0x7FFF) || (tx_coal > 0x7FFF) + || (rx_max_coal > 0xF) || (tx_max_coal > 0xF)) + return -EINVAL; + + rdintcm = INT_REG_VAL(rx_coal, GET_INT_COAL_RC(priv->rdintcm), + GET_RXF_TH(priv->rdintcm), rx_max_coal); + tdintcm = INT_REG_VAL(tx_coal, GET_INT_COAL_RC(priv->tdintcm), 0, + tx_max_coal); + + priv->rdintcm = rdintcm; + priv->tdintcm = tdintcm; + + WRITE_REG(priv, regRDINTCM0, rdintcm); + WRITE_REG(priv, regTDINTCM0, tdintcm); + + return 0; +} + +/* Convert RX fifo size to number of pending packets */ +static inline int bdx_rx_fifo_size_to_packets(int rx_size) +{ + return ((FIFO_SIZE * (1 << rx_size)) / sizeof(struct rxf_desc)); +} + +/* Convert TX fifo size to number of pending packets */ +static inline int bdx_tx_fifo_size_to_packets(int tx_size) +{ + return ((FIFO_SIZE * (1 << tx_size)) / BDX_TXF_DESC_SZ); +} + +/* + * bdx_get_ringparam - report ring sizes + * @netdev + * @ring + */ +static void +bdx_get_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring) +{ + struct bdx_priv *priv = netdev->priv; + + /*max_pending - the maximum-sized FIFO we allow */ + ring->rx_max_pending = bdx_rx_fifo_size_to_packets(3); + ring->tx_max_pending = bdx_tx_fifo_size_to_packets(3); + ring->rx_pending = bdx_rx_fifo_size_to_packets(priv->rxf_size); + ring->tx_pending = bdx_tx_fifo_size_to_packets(priv->txd_size); +} + +/* + * bdx_set_ringparam - set ring sizes + * @netdev + * @ring + */ +static int +bdx_set_ringparam(struct net_device *netdev, struct ethtool_ringparam *ring) +{ + struct bdx_priv *priv = netdev->priv; + int rx_size = 0; + int tx_size = 0; + + for (; rx_size < 4; rx_size++) { + if (bdx_rx_fifo_size_to_packets(rx_size) >= ring->rx_pending) + break; + } + if (rx_size == 4) + rx_size = 3; + + for (; tx_size < 4; tx_size++) { + if (bdx_tx_fifo_size_to_packets(tx_size) >= ring->tx_pending) + break; + } + if (tx_size == 4) + tx_size = 3; + + /*Is there anything to do? */ + if ((rx_size == priv->rxf_size) + && (tx_size == priv->txd_size)) + return 0; + + priv->rxf_size = rx_size; + if (rx_size > 1) + priv->rxd_size = rx_size - 1; + else + priv->rxd_size = rx_size; + + priv->txf_size = priv->txd_size = tx_size; + + if (netif_running(netdev)) { + bdx_close(netdev); + bdx_open(netdev); + } + return 0; +} + +/* + * bdx_get_strings - return a set of strings that describe the requested objects + * @netdev + * @data + */ +static void bdx_get_strings(struct net_device *netdev, u32 stringset, u8 *data) +{ + switch (stringset) { + case ETH_SS_TEST: + memcpy(data, *bdx_test_names, sizeof(bdx_test_names)); + break; + case ETH_SS_STATS: + memcpy(data, *bdx_stat_names, sizeof(bdx_stat_names)); + break; + } +} + +/* + * bdx_get_stats_count - return number of 64bit statistics counters + * @netdev + */ +static int bdx_get_stats_count(struct net_device *netdev) +{ + struct bdx_priv *priv = netdev->priv; + BDX_ASSERT(sizeof(bdx_stat_names) / ETH_GSTRING_LEN + != sizeof(struct bdx_stats) / sizeof(u64)); + return ((priv->stats_flag) ? (sizeof(bdx_stat_names) / ETH_GSTRING_LEN) + : 0); +} + +/* + * bdx_get_ethtool_stats - return device's hardware L2 statistics + * @netdev + * @stats + * @data + */ +static void bdx_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *data) +{ + struct bdx_priv *priv = netdev->priv; + + if (priv->stats_flag) { + + /* Update stats from HW */ + bdx_update_stats(priv); + + /* Copy data to user buffer */ + memcpy(data, &priv->hw_stats, sizeof(priv->hw_stats)); + } +} + +/* + * bdx_ethtool_ops - ethtool interface implementation + * @netdev + */ +static void bdx_ethtool_ops(struct net_device *netdev) +{ + static struct ethtool_ops bdx_ethtool_ops = { + .get_settings = bdx_get_settings, + .get_drvinfo = bdx_get_drvinfo, + .get_link = ethtool_op_get_link, + .get_coalesce = bdx_get_coalesce, + .set_coalesce = bdx_set_coalesce, + .get_ringparam = bdx_get_ringparam, + .set_ringparam = bdx_set_ringparam, + .get_rx_csum = bdx_get_rx_csum, + .get_tx_csum = bdx_get_tx_csum, + .get_sg = ethtool_op_get_sg, + .get_tso = ethtool_op_get_tso, + .get_strings = bdx_get_strings, + .get_stats_count = bdx_get_stats_count, + .get_ethtool_stats = bdx_get_ethtool_stats, + }; + + SET_ETHTOOL_OPS(netdev, &bdx_ethtool_ops); +} + +/** + * bdx_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * bdx_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + **/ +static void __devexit bdx_remove(struct pci_dev *pdev) +{ + struct pci_nic *nic = pci_get_drvdata(pdev); + struct net_device *ndev; + int port; + + for (port = 0; port < nic->port_num; port++) { + ndev = nic->priv[port]->ndev; + unregister_netdev(ndev); + free_netdev(ndev); + } + + /*bdx_hw_reset_direct(nic->regs); */ +#ifdef BDX_MSI + if (nic->irq_type == IRQ_MSI) + pci_disable_msi(pdev); +#endif + + iounmap(nic->regs); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + vfree(nic); + + RET(); +} + +static struct pci_driver bdx_pci_driver = { + .name = BDX_DRV_NAME, + .id_table = bdx_pci_tbl, + .probe = bdx_probe, + .remove = __devexit_p(bdx_remove), +}; + +/* + * print_driver_id - print parameters of the driver build + */ +static void __init print_driver_id(void) +{ + printk(KERN_INFO "%s: %s, %s\n", BDX_DRV_NAME, BDX_DRV_DESC, + BDX_DRV_VERSION); + printk(KERN_INFO "%s: Options: hw_csum %s\n", BDX_DRV_NAME, + BDX_MSI_STRING); +} + +static int __init bdx_module_init(void) +{ + ENTER; + bdx_firmware_endianess(); + init_txd_sizes(); + print_driver_id(); + RET(pci_register_driver(&bdx_pci_driver)); +} + +module_init(bdx_module_init); + +static void __exit bdx_module_exit(void) +{ + ENTER; + pci_unregister_driver(&bdx_pci_driver); + RET(); +} + +module_exit(bdx_module_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(BDX_DRV_DESC); |