Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits)
  macvlan: fix panic if lowerdev in a bond
  tg3: Add braces around 5906 workaround.
  tg3: Fix NETIF_F_LOOPBACK error
  macvlan: remove one synchronize_rcu() call
  networking: NET_CLS_ROUTE4 depends on INET
  irda: Fix error propagation in ircomm_lmp_connect_response()
  irda: Kill set but unused variable 'bytes' in irlan_check_command_param()
  irda: Kill set but unused variable 'clen' in ircomm_connect_indication()
  rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport()
  be2net: Kill set but unused variable 'req' in lancer_fw_download()
  irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication()
  atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined.
  rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer().
  rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler()
  rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection()
  rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window()
  pkt_sched: Kill set but unused variable 'protocol' in tc_classify()
  isdn: capi: Use pr_debug() instead of ifdefs.
  tg3: Update version to 3.119
  tg3: Apply rx_discards fix to 5719/5720
  ...

Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c
as per Davem.

1 files changed, 20 insertions, 13 deletions

diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h
index 6cb6935..2e2dbfa 100644
--- a/drivers/net/wireless/libertas/host.h
+++ b/drivers/net/wireless/libertas/host.h
@@ -1,7 +1,7 @@
-/**
-  * This file function prototypes, data structure
-  * and  definitions for all the host/station commands
-  */
+/*
+ * This file function prototypes, data structure
+ * and  definitions for all the host/station commands
+ */
 
 #ifndef _LBS_HOST_H_
 #define _LBS_HOST_H_
@@ -13,9 +13,10 @@
 
 #define CMD_OPTION_WAITFORRSP                   0x0002
 
-/** Host command IDs */
+/* Host command IDs */
 
-/* Return command are almost always the same as the host command, but with
+/*
+ * Return command are almost always the same as the host command, but with
  * bit 15 set high.  There are a few exceptions, though...
  */
 #define CMD_RET(cmd)                            (0x8000 | cmd)
@@ -251,7 +252,7 @@ enum cmd_mesh_config_types {
 	CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
 };
 
-/** Card Event definition */
+/* Card Event definition */
 #define MACREG_INT_CODE_TX_PPA_FREE		0
 #define MACREG_INT_CODE_TX_DMA_DONE		1
 #define MACREG_INT_CODE_LINK_LOST_W_SCAN	2
@@ -624,12 +625,14 @@ struct cmd_ds_802_11_rf_channel {
 struct cmd_ds_802_11_rssi {
 	struct cmd_header hdr;
 
-	/* request:  number of beacons (N) to average the SNR and NF over
+	/*
+	 * request:  number of beacons (N) to average the SNR and NF over
 	 * response: SNR of most recent beacon
 	 */
 	__le16 n_or_snr;
 
-	/* The following fields are only set in the response.
+	/*
+	 * The following fields are only set in the response.
 	 * In the request these are reserved and should be set to 0.
 	 */
 	__le16 nf;       /* most recent beacon noise floor */
@@ -680,14 +683,16 @@ struct cmd_ds_802_11_ps_mode {
 
 	__le16 action;
 
-	/* Interval for keepalive in PS mode:
+	/*
+	 * Interval for keepalive in PS mode:
 	 * 0x0000 = don't change
 	 * 0x001E = firmware default
 	 * 0xFFFF = disable
 	 */
 	__le16 nullpktinterval;
 
-	/* Number of DTIM intervals to wake up for:
+	/*
+	 * Number of DTIM intervals to wake up for:
 	 * 0 = don't change
 	 * 1 = firmware default
 	 * 5 = max
@@ -697,7 +702,8 @@ struct cmd_ds_802_11_ps_mode {
 	__le16 reserved;
 	__le16 locallisteninterval;
 
-	/* AdHoc awake period (FW v9+ only):
+	/*
+	 * AdHoc awake period (FW v9+ only):
 	 * 0 = don't change
 	 * 1 = always awake (IEEE standard behavior)
 	 * 2 - 31 = sleep for (n - 1) periods and awake for 1 period
@@ -771,7 +777,8 @@ struct adhoc_bssdesc {
 	__le16 capability;
 	u8 rates[MAX_RATES];
 
-	/* DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
+	/*
+	 * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
 	 * Adhoc join command and will cause a binary layout mismatch with
 	 * the firmware
 	 */