Merge 3.5-rc4 into staging-next

This picks up the staging changes made in 3.5-rc4 so that everyone can sync up
properly.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 23 insertions, 2 deletions

diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index b26395d..3e7e47d 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -673,7 +673,7 @@ static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip,
 	 * wakeup is anyhow controlled by the RIMSC and FIMSC registers.
 	 */
 	if (nmk_chip->sleepmode && on) {
-		__nmk_gpio_set_slpm(nmk_chip, gpio % nmk_chip->chip.base,
+		__nmk_gpio_set_slpm(nmk_chip, gpio % NMK_GPIO_PER_CHIP,
 				    NMK_GPIO_SLPM_WAKEUP_ENABLE);
 	}
 
@@ -1246,6 +1246,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
 		ret = PTR_ERR(clk);
 		goto out_unmap;
 	}
+	clk_prepare(clk);
 
 	nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
 	if (!nmk_chip) {
@@ -1437,7 +1438,27 @@ static int nmk_pmx_enable(struct pinctrl_dev *pctldev, unsigned function,
 
 	dev_dbg(npct->dev, "enable group %s, %u pins\n", g->name, g->npins);
 
-	/* Handle this special glitch on altfunction C */
+	/*
+	 * If we're setting altfunc C by setting both AFSLA and AFSLB to 1,
+	 * we may pass through an undesired state. In this case we take
+	 * some extra care.
+	 *
+	 * Safe sequence used to switch IOs between GPIO and Alternate-C mode:
+	 *  - Save SLPM registers (since we have a shadow register in the
+	 *    nmk_chip we're using that as backup)
+	 *  - Set SLPM=0 for the IOs you want to switch and others to 1
+	 *  - Configure the GPIO registers for the IOs that are being switched
+	 *  - Set IOFORCE=1
+	 *  - Modify the AFLSA/B registers for the IOs that are being switched
+	 *  - Set IOFORCE=0
+	 *  - Restore SLPM registers
+	 *  - Any spurious wake up event during switch sequence to be ignored
+	 *    and cleared
+	 *
+	 * We REALLY need to save ALL slpm registers, because the external
+	 * IOFORCE will switch *all* ports to their sleepmode setting to as
+	 * to avoid glitches. (Not just one port!)
+	 */
 	glitch = (g->altsetting == NMK_GPIO_ALT_C);
 
 	if (glitch) {