Staging: bcm: fixed warning 'space required after ',' '

This patch fixes warning found by checkpatch.pl in driver bcm.

Signed-off-by: Tülin İzer <tulinizer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 39 insertions, 39 deletions

diff --git a/drivers/staging/bcm/InterfaceIdleMode.c b/drivers/staging/bcm/InterfaceIdleMode.c
index a1bf215..33c9915b 100644
--- a/drivers/staging/bcm/InterfaceIdleMode.c
+++ b/drivers/staging/bcm/InterfaceIdleMode.c
@@ -48,29 +48,29 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int* pui
 	unsigned int	uiRegRead = 0;
 	int bytes;
 
-	BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"SubType of Message :0x%X", ntohl(*puiBuffer));
+	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "SubType of Message :0x%X", ntohl(*puiBuffer));
 
 	if(ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD)
 	{
-		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL," Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, " Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype");
 		if(ntohl(*(puiBuffer+1)) == 0 )
 		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Got IDLE MODE WAKE UP Response From F/W");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got IDLE MODE WAKE UP Response From F/W");
 
-			status = wrmalt (Adapter,SW_ABORT_IDLEMODE_LOC, &uiRegRead, sizeof(uiRegRead));
+			status = wrmalt (Adapter, SW_ABORT_IDLEMODE_LOC, &uiRegRead, sizeof(uiRegRead));
 			if(status)
 			{
-				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg");
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg");
 				return status;
 			}
 
 			if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
 			{
 				uiRegRead = 0x00000000 ;
-				status = wrmalt (Adapter,DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegRead, sizeof(uiRegRead));
+				status = wrmalt (Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegRead, sizeof(uiRegRead));
 				if(status)
 				{
-					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode	Reg");
+					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode	Reg");
 					return status;
 				}
 			}
@@ -81,18 +81,18 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int* pui
 				bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegRead, sizeof(uiRegRead));
 				if (bytes < 0) {
 					status = bytes;
-					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg0");
+					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg0");
 					return status;
 				}
 				//clear on read Register
 				bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegRead, sizeof(uiRegRead));
 				if (bytes < 0) {
 					status = bytes;
-					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort	Reg1");
+					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort	Reg1");
 					return status;
 				}
 			}
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device Up from Idle Mode");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device Up from Idle Mode");
 
 			// Set Idle Mode Flag to False and Clear IdleMode reg.
 			Adapter->IdleMode = FALSE;
@@ -105,12 +105,12 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int* pui
 		{
 			if(TRUE == Adapter->IdleMode)
 			{
-				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Device is already in Idle mode....");
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device is already in Idle mode....");
 				return status ;
 			}
 
 			uiRegRead = 0;
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got Req from F/W to go in IDLE mode \n");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got Req from F/W to go in IDLE mode \n");
 
 			if (Adapter->chip_id== BCS220_2 ||
 				Adapter->chip_id == BCS220_2BC ||
@@ -121,17 +121,17 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int* pui
 				bytes = rdmalt(Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
 				if (bytes < 0) {
 					status = bytes;
-					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "rdm failed while Reading HPM_CONFIG_LDO145 Reg 0\n");
+					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "rdm failed while Reading HPM_CONFIG_LDO145 Reg 0\n");
 					return status;
 				}
 
 
 				uiRegRead |= (1<<17);
 
-				status = wrmalt (Adapter,HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
+				status = wrmalt (Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
 				if(status)
 				{
-					BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg\n");
+					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg\n");
 					return status;
 				}
 
@@ -141,8 +141,8 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int* pui
 	}
 	else if(ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG)
 	{
-		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "OverRiding Service Flow Params");
-		OverrideServiceFlowParams(Adapter,puiBuffer);
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "OverRiding Service Flow Params");
+		OverrideServiceFlowParams(Adapter, puiBuffer);
 	}
 	return status;
 }
@@ -152,17 +152,17 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
 	int 	status = STATUS_SUCCESS;
 	unsigned int value;
 	unsigned int chip_id ;
-	unsigned long timeout = 0 ,itr = 0;
+	unsigned long timeout = 0, itr = 0;
 
 	int 	lenwritten = 0;
-	unsigned char aucAbortPattern[8]={0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
+	unsigned char aucAbortPattern[8]={0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
 	struct bcm_interface_adapter *psInterfaceAdapter = Adapter->pvInterfaceAdapter;
 
 	//Abort Bus suspend if its already suspended
 	if((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend))
 	{
 		status = usb_autopm_get_interface(psInterfaceAdapter->interface);
-		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Bus got wakeup..Aborting Idle mode... status:%d \n",status);
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Bus got wakeup..Aborting Idle mode... status:%d \n", status);
 
 	}
 
@@ -171,11 +171,11 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
 	   (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE))
 	{
 		//write the SW abort pattern.
-		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern);
-		status = wrmalt(Adapter,SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern));
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern);
+		status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern));
 		if(status)
 		{
-				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
+				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
 				return status;
 		}
 	}
@@ -183,10 +183,10 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
 	if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
 	{
 		value = 0x80000000;
-		status = wrmalt(Adapter,DEBUG_INTERRUPT_GENERATOR_REGISTOR, &value, sizeof(value));
+		status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &value, sizeof(value));
 		if(status)
 		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Register failed");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Register failed");
 			return status;
 		}
 	}
@@ -206,12 +206,12 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
 			5000);
 		if(status)
 		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending Abort pattern down fails with status:%d..\n",status);
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending Abort pattern down fails with status:%d..\n", status);
 			return status;
 		}
 		else
 		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "NOB Sent down :%d", lenwritten);
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "NOB Sent down :%d", lenwritten);
 		}
 
 		//mdelay(25);
@@ -230,17 +230,17 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
 		}
 		if(timeout < jiffies )
 		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Not able to read chip-id even after 25 msec");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Not able to read chip-id even after 25 msec");
 		}
 		else
 		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Number of completed iteration to read chip-id :%lu", itr);
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Number of completed iteration to read chip-id :%lu", itr);
 		}
 
-		status = wrmalt(Adapter,SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(status));
+		status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(status));
 		if(status)
 		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
 			return status;
 		}
 	}
@@ -251,11 +251,11 @@ int InterfaceIdleModeWakeup(struct bcm_mini_adapter *Adapter)
 	ULONG	Status = 0;
 	if(Adapter->bTriedToWakeUpFromlowPowerMode)
 	{
-		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Wake up already attempted.. ignoring\n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Wake up already attempted.. ignoring\n");
 	}
 	else
 	{
-		BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"Writing Low Power Mode Abort pattern to the Device\n");
+		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing Low Power Mode Abort pattern to the Device\n");
 		Adapter->bTriedToWakeUpFromlowPowerMode = TRUE;
 		InterfaceAbortIdlemode(Adapter, Adapter->usIdleModePattern);
 
@@ -273,10 +273,10 @@ void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter)
 	{
 		// clear idlemode interrupt.
 		uiRegVal = 0;
-		Status =wrmalt(Adapter,DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal));
+		Status =wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal));
 		if(Status)
 		{
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status);
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status);
 			return;
 		}
 	}
@@ -285,17 +285,17 @@ void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter)
 	{
 
         //clear Interrupt EP registers.
-		bytes = rdmalt(Adapter,DEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal));
+		bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal));
 		if (bytes < 0) {
 			Status = bytes;
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"RDM of DEVICE_INT_OUT_EP_REG0 failed with Err :%d", Status);
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG0 failed with Err :%d", Status);
 			return;
 		}
 
-		bytes = rdmalt(Adapter,DEVICE_INT_OUT_EP_REG1, &uiRegVal, sizeof(uiRegVal));
+		bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegVal, sizeof(uiRegVal));
 		if (bytes < 0) {
 			Status = bytes;
-			BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"RDM of DEVICE_INT_OUT_EP_REG1 failed with Err :%d", Status);
+			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG1 failed with Err :%d", Status);
 			return;
 		}
 	}