dpa_offload: Add dts required when running ipsec offload usecase

These dts files are used in conjuntion with the ipsec offload,
reassembly and fragmentation usecases.
There is one dts for each DPAA platform.

Signed-off-by: Radu Bulie <radu.bulie@freescale.com>
Signed-off-by: Alex Badicioiu <alexandru.badicioiu@freescale.com>
Signed-off-by: Marian Chereji <marian.chereji@freescale.com>
Change-Id: Id714faddcf126ccb2258d17e2951a7e7e92d9728
Reviewed-on: http://git.am.freescale.net:8181/2232
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>

6 files changed, 1156 insertions, 0 deletions

diff --git a/drivers/staging/fsl_dpa_offload/dts/b4860qds-usdpaa-shared-interfaces.dts b/drivers/staging/fsl_dpa_offload/dts/b4860qds-usdpaa-shared-interfaces.dts
new file mode 100644
index 0000000..f109b76
--- /dev/null
+++ b/drivers/staging/fsl_dpa_offload/dts/b4860qds-usdpaa-shared-interfaces.dts
@@ -0,0 +1,149 @@
+/*
+ * B4860QDS Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "b4860qds.dts"
+
+/ {
+	/* NB: "bpool-ethernet-seeds" is not set to avoid buffer seeding,
+	 * because apps seed these pools with buffers allocated at
+	 * run-time.
+	 * HOWEVER, the kernel driver requires the buffer-size so
+	 * "fsl,bpool-ethernet-cfg" is set. It also mis-interprets
+	 * things if the base-address is zero (hence the 0xdeadbeef
+	 * values).
+	 */
+	bp7: buffer-pool@7 {
+		compatible = "fsl,b4860-bpool", "fsl,bpool";
+		fsl,bpid = <7>;
+		fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
+		fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
+	};
+	bp8: buffer-pool@8 {
+		compatible = "fsl,b4860-bpool", "fsl,bpool";
+		fsl,bpid = <8>;
+		fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+	bp9: buffer-pool@9 {
+		compatible = "fsl,b4860-bpool", "fsl,bpool";
+		fsl,bpid = <9>;
+		fsl,bpool-ethernet-cfg = <0 0 0 1728 0 0xfeedabba>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+
+	bp10: buffer-pool@10 {
+		compatible = "fsl,b4860-bpool", "fsl,bpool";
+		fsl,bpid = <10>;
+		fsl,bpool-thresholds = <0x10 0x30 0x0 0x0>;
+	};
+	bp11: buffer-pool@11 {
+		compatible = "fsl,b4860-bpool", "fsl,bpool";
+		fsl,bpid = <11>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+	bp12: buffer-pool@12 {
+		compatible = "fsl,b4860-bpool", "fsl,bpool";
+		fsl,bpid = <12>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+
+	bp16: buffer-pool@16 {
+                        compatible = "fsl,b4860-bpool", "fsl,bpool";
+                        fsl,bpid = <16>;
+			fsl,bpool-ethernet-cfg = <0 2048 0 1728 0 0>;
+                        fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+       };
+
+
+	fsl,dpaa {
+		ethernet@0 {
+			compatible = "fsl,b4860-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x50 1 0x51 1>;
+			fsl,qman-frame-queues-tx = <0x70 1 0x71 1>;
+		};
+		ethernet@1 {
+			compatible = "fsl,b4860-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x52 1 0x53 1>;
+			fsl,qman-frame-queues-tx = <0x72 1 0x73 1>;
+		};
+		ethernet@2 {
+			compatible = "fsl,b4860-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x54 1 0x55 1>;
+			fsl,qman-frame-queues-tx = <0x74 1 0x75 1>;
+		};
+		ethernet@5 {
+			compatible = "fsl,b4860-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp16>;
+			fsl,qman-frame-queues-rx = <0x5c 1 0x5d 1>;
+			fsl,qman-frame-queues-tx = <0x7c 1 0x7d 1>;
+		};
+
+                /* ethernet@16 declared as MAC-less interface with no "fsl,fman-mac" property.
+                 * USDPAA will seed buffers to this buffer pool and initialize 8 TX Frame
+                 * queues. The ethernet driver will initialize 8 RX default Frame queues.
+                 * On receiving frame at this interface, the ethernet driver will do
+                 * kmap_atomic/kunmap_atomic for that frame. */
+               ethernet@16 {
+                        compatible = "fsl,b4860-dpa-ethernet", "fsl,dpa-ethernet";
+                        fsl,bman-buffer-pools = <&bp16>;
+                        fsl,qman-frame-queues-rx = <4000 8>;
+                        fsl,qman-frame-queues-tx = <4008 8>;
+                        local-mac-address = [00 11 22 33 44 55];
+                };
+
+		dpa-fman0-oh@2 {
+			compatible = "fsl,dpa-oh";
+			/* Define frame queues for the OH port*/
+			/* <OH Rx error, OH Rx default> */
+			fsl,qman-frame-queues-oh = <0x6e 1 0x6f 1>;
+			fsl,bman-buffer-pools = <&bp9>;
+			fsl,fman-oh-port = <&fman0_oh2>;
+		};
+                dpa_fman0_oh3: dpa-fman0-oh@3 {
+                        compatible = "fsl,dpa-oh";
+                        fsl,qman-frame-queues-oh = <0x68 1 0x69 1>;
+                        fsl,bman-buffer-pools = <&bp9>;
+                        fsl,fman-oh-port = <&fman0_oh3>;
+                };
+                dpa_fman0_oh4: dpa-fman0-oh@4 {
+                        compatible = "fsl,dpa-oh";
+                        fsl,qman-frame-queues-oh = <0x70 1 0x71 1>;
+                        fsl,bman-buffer-pools = <&bp9>;
+                        fsl,fman-oh-port = <&fman0_oh4>;
+                };
+	};
+};
diff --git a/drivers/staging/fsl_dpa_offload/dts/b4860qds-usdpaa.dts b/drivers/staging/fsl_dpa_offload/dts/b4860qds-usdpaa.dts
new file mode 100644
index 0000000..91c4bcb
--- /dev/null
+++ b/drivers/staging/fsl_dpa_offload/dts/b4860qds-usdpaa.dts
@@ -0,0 +1,127 @@
+/*
+ * B4860QDS Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "b4860qds.dts"
+
+/ {
+	/* NB: "bpool-ethernet-seeds" is not set to avoid buffer seeding,
+	 * because apps seed these pools with buffers allocated at
+	 * run-time.
+	 * HOWEVER, the kernel driver requires the buffer-size so
+	 * "fsl,bpool-ethernet-cfg" is set. It also mis-interprets
+	 * things if the base-address is zero (hence the 0xdeadbeef
+	 * values).
+	 */
+	bp7: buffer-pool@7 {
+		compatible = "fsl,b4860-bpool", "fsl,bpool";
+		fsl,bpid = <7>;
+		fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
+		fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
+	};
+	bp8: buffer-pool@8 {
+		compatible = "fsl,b4860-bpool", "fsl,bpool";
+		fsl,bpid = <8>;
+		fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+	bp9: buffer-pool@9 {
+		compatible = "fsl,b4860-bpool", "fsl,bpool";
+		fsl,bpid = <9>;
+		fsl,bpool-ethernet-cfg = <0 0 0 1728 0 0xfeedabba>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+
+	bp10: buffer-pool@10 {
+		compatible = "fsl,b4860-bpool", "fsl,bpool";
+		fsl,bpid = <10>;
+		fsl,bpool-thresholds = <0x10 0x30 0x0 0x0>;
+	};
+	bp11: buffer-pool@11 {
+		compatible = "fsl,b4860-bpool", "fsl,bpool";
+		fsl,bpid = <11>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+	bp12: buffer-pool@12 {
+		compatible = "fsl,b4860-bpool", "fsl,bpool";
+		fsl,bpid = <12>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+
+	fsl,dpaa {
+		ethernet@0 {
+			compatible = "fsl,b4860-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x50 1 0x51 1>;
+			fsl,qman-frame-queues-tx = <0x70 1 0x71 1>;
+		};
+		ethernet@1 {
+			compatible = "fsl,b4860-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x52 1 0x53 1>;
+			fsl,qman-frame-queues-tx = <0x72 1 0x73 1>;
+		};
+		ethernet@2 {
+			compatible = "fsl,b4860-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x54 1 0x55 1>;
+			fsl,qman-frame-queues-tx = <0x74 1 0x75 1>;
+		};
+		ethernet@5 {
+			compatible = "fsl,b4860-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x5c 1 0x5d 1>;
+			fsl,qman-frame-queues-tx = <0x7c 1 0x7d 1>;
+		};
+		dpa-fman0-oh@2 {
+			compatible = "fsl,dpa-oh";
+			/* Define frame queues for the OH port*/
+			/* <OH Rx error, OH Rx default> */
+			fsl,qman-frame-queues-oh = <0x6e 1 0x6f 1>;
+			fsl,bman-buffer-pools = <&bp9>;
+			fsl,fman-oh-port = <&fman0_oh2>;
+		};
+                dpa_fman0_oh3: dpa-fman0-oh@3 {
+                        compatible = "fsl,dpa-oh";
+                        fsl,qman-frame-queues-oh = <0x68 1 0x69 1>;
+                        fsl,bman-buffer-pools = <&bp9>;
+                        fsl,fman-oh-port = <&fman0_oh3>;
+                };
+                dpa_fman0_oh4: dpa-fman0-oh@4 {
+                        compatible = "fsl,dpa-oh";
+                        fsl,qman-frame-queues-oh = <0x70 1 0x71 1>;
+                        fsl,bman-buffer-pools = <&bp9>;
+                        fsl,fman-oh-port = <&fman0_oh4>;
+                };
+	};
+};
diff --git a/drivers/staging/fsl_dpa_offload/dts/p4080ds-usdpaa-shared-interfaces.dts b/drivers/staging/fsl_dpa_offload/dts/p4080ds-usdpaa-shared-interfaces.dts
new file mode 100644
index 0000000..038e055
--- /dev/null
+++ b/drivers/staging/fsl_dpa_offload/dts/p4080ds-usdpaa-shared-interfaces.dts
@@ -0,0 +1,171 @@
+/*
+ * P4080DS Device Tree Source
+ *
+ * Copyright 2009-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p4080ds.dts"
+
+/ {
+	/* NB: "bpool-ethernet-seeds" is not set to avoid buffer seeding,
+	 * because apps seed these pools with buffers allocated at
+	 * run-time.
+	 * HOWEVER, the kernel driver requires the buffer-size so
+	 * "fsl,bpool-ethernet-cfg" is set. It also mis-interprets
+	 * things if the base-address is zero (hence the 0xdeadbeef
+	 * values).
+	 */
+	bp7: buffer-pool@7 {
+		compatible = "fsl,p4080-bpool", "fsl,bpool";
+		fsl,bpid = <7>;
+		fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
+		fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
+	};
+	bp8: buffer-pool@8 {
+		compatible = "fsl,p4080-bpool", "fsl,bpool";
+		fsl,bpid = <8>;
+		fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+	bp9: buffer-pool@9 {
+		compatible = "fsl,p4080-bpool", "fsl,bpool";
+		fsl,bpid = <9>;
+		fsl,bpool-ethernet-cfg = <0 0 0 1728 0 0xfeedabba>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+	bp16: buffer-pool@16 {
+                        compatible = "fsl,p4080-bpool", "fsl,bpool";
+                        fsl,bpid = <16>;
+                        fsl,bpool-ethernet-cfg = <0 2048 0 1728 0 0>;
+                        fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+       };
+	bp17: buffer-pool@17 {
+                        compatible = "fsl,p4080-bpool", "fsl,bpool";
+                        fsl,bpid = <17>;
+                        fsl,bpool-ethernet-cfg = <0 2048 0 1728 0 0>;
+                        fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+       };
+	fsl,dpaa {
+		ethernet@0 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x50 1 0x51 1>;
+			fsl,qman-frame-queues-tx = <0x70 1 0x71 1>;
+		};
+
+		/* ethernet@1 will be used as a normal Linux ethernet that
+		 * interfaces to the kernel network stack. All others will be
+		 * dedicated for use by usdpaa */
+
+		ethernet@2 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x54 1 0x55 1>;
+			fsl,qman-frame-queues-tx = <0x74 1 0x75 1>;
+		};
+		ethernet@3 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x56 1 0x57 1>;
+			fsl,qman-frame-queues-tx = <0x76 1 0x77 1>;
+		};
+		ethernet@4 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x5a 1 0x5b 1>;
+			fsl,qman-frame-queues-tx = <0x7a 1 0x7b 1>;
+		};
+		ethernet@5 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x5c 1 0x5d 1>;
+			fsl,qman-frame-queues-tx = <0x7c 1 0x7d 1>;
+		};
+		ethernet@6 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x5e 1 0x5f 1>;
+			fsl,qman-frame-queues-tx = <0x7e 1 0x7f 1>;
+		};
+		ethernet@7 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x60 1 0x61 1>;
+			fsl,qman-frame-queues-tx = <0x80 1 0x81 1>;
+		};
+		ethernet@8 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x62 1 0x63 1>;
+			fsl,qman-frame-queues-tx = <0x82 1 0x83 1>;
+		};
+		/* ethernet@9 declared as shared MAC. USDPAA will seed buffers to
+		 * this buffer pool. The ethernet driver will initialize the RX default,
+		 * RX error, TX error, TX confirm and 8 TX Frame queues. On receiving frame
+		 * at this interface, the ethernet driver will do kmap_atomic/kunmap_atomic
+		 * for that frame. */
+		ethernet@9 {
+			compatible = "fsl,p4080-dpa-ethernet", "fsl,dpa-ethernet";
+			fsl,bman-buffer-pools = <&bp17>;
+			fsl,qman-frame-queues-rx = <0x66 1 0x67 1 0x2000 3>;
+			fsl,qman-frame-queues-tx = <0 1 0 1 0x3000 8>;
+		};
+		/* ethernet@16 declared as MAC-less interface with no "fsl,fman-mac" property.
+		 * USDPAA will seed buffers to this buffer pool and initialize 8 TX Frame
+		 * queues. The ethernet driver will initialize 8 RX default Frame queues.
+		 * On receiving frame at this interface, the ethernet driver will do
+		 * kmap_atomic/kunmap_atomic for that frame. */
+		ethernet@16 {
+			compatible = "fsl,p4080-dpa-ethernet", "fsl,dpa-ethernet";
+			fsl,bman-buffer-pools = <&bp16>;
+			fsl,qman-frame-queues-rx = <4000 8>;
+			fsl,qman-frame-queues-tx = <4008 8>;
+			local-mac-address = [00 11 22 33 44 55];
+		};
+		dpa_fman1_oh1: dpa-fman1-oh@1 {
+			compatible = "fsl,dpa-oh";
+			fsl,qman-frame-queues-oh = <0x64 1 0x65 1>;
+			fsl,fman-oh-port = <&fman1_oh1>;
+		};
+		dpa_fman1_oh2: dpa-fman1-oh@2 { /* Define frame queues for the OH port*/
+			compatible = "fsl,dpa-oh"; /* <OH Rx error, OH Rx default> */
+			fsl,qman-frame-queues-oh = <0x68 1 0x69 1>;
+			fsl,bman-buffer-pools = <&bp8>;
+			fsl,fman-oh-port = <&fman1_oh2>;
+		};
+		dpa_fman1_oh3: dpa-fman1-oh@3 {
+			compatible = "fsl,dpa-oh";
+			fsl,qman-frame-queues-oh = <0x70 1 0x71 1>;
+			fsl,bman-buffer-pools = <&bp9>;
+			fsl,fman-oh-port = <&fman1_oh3>;
+		};
+	};
+};
diff --git a/drivers/staging/fsl_dpa_offload/dts/p4080ds-usdpaa.dts b/drivers/staging/fsl_dpa_offload/dts/p4080ds-usdpaa.dts
new file mode 100644
index 0000000..da0ca0f
--- /dev/null
+++ b/drivers/staging/fsl_dpa_offload/dts/p4080ds-usdpaa.dts
@@ -0,0 +1,143 @@
+/*
+ * P4080DS Device Tree Source
+ *
+ * Copyright 2009-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p4080ds.dts"
+
+/ {
+	/* NB: "bpool-ethernet-seeds" is not set to avoid buffer seeding,
+	 * because apps seed these pools with buffers allocated at
+	 * run-time.
+	 * HOWEVER, the kernel driver requires the buffer-size so
+	 * "fsl,bpool-ethernet-cfg" is set. It also mis-interprets
+	 * things if the base-address is zero (hence the 0xdeadbeef
+	 * values).
+	 */
+	bp7: buffer-pool@7 {
+		compatible = "fsl,p4080-bpool", "fsl,bpool";
+		fsl,bpid = <7>;
+		fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
+		fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
+	};
+	bp8: buffer-pool@8 {
+		compatible = "fsl,p4080-bpool", "fsl,bpool";
+		fsl,bpid = <8>;
+		fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+	bp9: buffer-pool@9 {
+		compatible = "fsl,p4080-bpool", "fsl,bpool";
+		fsl,bpid = <9>;
+		fsl,bpool-ethernet-cfg = <0 0 0 1728 0 0xfeedabba>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+
+	fsl,dpaa {
+		ethernet@0 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x50 1 0x51 1>;
+			fsl,qman-frame-queues-tx = <0x70 1 0x71 1>;
+		};
+
+		/* ethernet@1 will be used as a normal Linux ethernet that
+		 * interfaces to the kernel network stack. All others will be
+		 * dedicated for use by usdpaa */
+
+		ethernet@2 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x54 1 0x55 1>;
+			fsl,qman-frame-queues-tx = <0x74 1 0x75 1>;
+		};
+		ethernet@3 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x56 1 0x57 1>;
+			fsl,qman-frame-queues-tx = <0x76 1 0x77 1>;
+		};
+		ethernet@4 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x5a 1 0x5b 1>;
+			fsl,qman-frame-queues-tx = <0x7a 1 0x7b 1>;
+		};
+		ethernet@5 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x5c 1 0x5d 1>;
+			fsl,qman-frame-queues-tx = <0x7c 1 0x7d 1>;
+		};
+		ethernet@6 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x5e 1 0x5f 1>;
+			fsl,qman-frame-queues-tx = <0x7e 1 0x7f 1>;
+		};
+		ethernet@7 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x60 1 0x61 1>;
+			fsl,qman-frame-queues-tx = <0x80 1 0x81 1>;
+		};
+		ethernet@8 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x62 1 0x63 1>;
+			fsl,qman-frame-queues-tx = <0x82 1 0x83 1>;
+		};
+		ethernet@9 {
+			compatible = "fsl,p4080-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x66 1 0x67 1>;
+			fsl,qman-frame-queues-tx = <0x86 1 0x87 1>;
+		};
+		dpa_fman1_oh1: dpa-fman1-oh@1 {
+			compatible = "fsl,dpa-oh";
+			fsl,qman-frame-queues-oh = <0x64 1 0x65 1>;
+			fsl,fman-oh-port = <&fman1_oh1>;
+		};
+		dpa_fman1_oh2: dpa-fman1-oh@2 {
+			compatible = "fsl,dpa-oh";
+			fsl,qman-frame-queues-oh = <0x68 1 0x69 1>;
+			fsl,bman-buffer-pools = <&bp9>;
+			fsl,fman-oh-port = <&fman1_oh2>;
+		};
+		dpa_fman1_oh3: dpa-fman1-oh@3 {
+			compatible = "fsl,dpa-oh";
+			fsl,qman-frame-queues-oh = <0x70 1 0x71 1>;
+			fsl,bman-buffer-pools = <&bp9>;
+			fsl,fman-oh-port = <&fman1_oh3>;
+		};
+	};
+};
diff --git a/drivers/staging/fsl_dpa_offload/dts/p5020ds-usdpaa.dts b/drivers/staging/fsl_dpa_offload/dts/p5020ds-usdpaa.dts
new file mode 100644
index 0000000..eaa4657
--- /dev/null
+++ b/drivers/staging/fsl_dpa_offload/dts/p5020ds-usdpaa.dts
@@ -0,0 +1,129 @@
+/*
+ * P5020DS Device Tree Source
+ *
+ * Copyright 2010-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "p5020ds.dts"
+
+/ {
+	/* NB: "bpool-ethernet-seeds" is not set to avoid buffer seeding,
+	 * because apps seed these pools with buffers allocated at
+	 * run-time.
+	 * HOWEVER, the kernel driver requires the buffer-size so
+	 * "fsl,bpool-ethernet-cfg" is set. It also mis-interprets
+	 * things if the base-address is zero (hence the 0xdeadbeef
+	 * values).
+	 */
+	bp7: buffer-pool@7 {
+		compatible = "fsl,p5020-bpool", "fsl,bpool";
+		fsl,bpid = <7>;
+		fsl,bpool-ethernet-cfg = <0 0 0 192 0 0xdeadbeef>;
+		fsl,bpool-thresholds = <0x400 0xc00 0x0 0x0>;
+	};
+	bp8: buffer-pool@8 {
+		compatible = "fsl,p5020-bpool", "fsl,bpool";
+		fsl,bpid = <8>;
+		fsl,bpool-ethernet-cfg = <0 0 0 576 0 0xabbaf00d>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+	bp9: buffer-pool@9 {
+		compatible = "fsl,p5020-bpool", "fsl,bpool";
+		fsl,bpid = <9>;
+		fsl,bpool-ethernet-cfg = <0 0 0 1600 0 0xfeedabba>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+	bp10: buffer-pool@10 {
+		compatible = "fsl,p5020-bpool", "fsl,bpool";
+		fsl,bpid = <10>;
+		fsl,bpool-thresholds = <0x10 0x30 0x0 0x0>;
+	};
+	bp11: buffer-pool@11 {
+		compatible = "fsl,p5020-bpool", "fsl,bpool";
+		fsl,bpid = <11>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+	bp12: buffer-pool@12 {
+		compatible = "fsl,p5020-bpool", "fsl,bpool";
+		fsl,bpid = <12>;
+		fsl,bpool-thresholds = <0x100 0x300 0x0 0x0>;
+	};
+
+	fsl,dpaa {
+		ethernet@0 {
+			compatible = "fsl,p5020-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x50 1 0x51 1>;
+			fsl,qman-frame-queues-tx = <0x70 1 0x71 1>;
+		};
+		ethernet@1 {
+			compatible = "fsl,p5020-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x52 1 0x53 1>;
+			fsl,qman-frame-queues-tx = <0x72 1 0x73 1>;
+		};
+		ethernet@2 {
+			compatible = "fsl,p5020-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x54 1 0x55 1>;
+			fsl,qman-frame-queues-tx = <0x74 1 0x75 1>;
+		};
+		ethernet@3 {
+			compatible = "fsl,p5020-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x56 1 0x57 1>;
+			fsl,qman-frame-queues-tx = <0x76 1 0x77 1>;
+		};
+		ethernet@4 {
+			compatible = "fsl,p5020-dpa-ethernet-init", "fsl,dpa-ethernet-init";
+			fsl,bman-buffer-pools = <&bp7 &bp8 &bp9>;
+			fsl,qman-frame-queues-rx = <0x58 1 0x59 1>;
+			fsl,qman-frame-queues-tx = <0x78 1 0x79 1>;
+		};
+		dpa_fman0_oh1: dpa-fman0-oh@1 {
+			compatible = "fsl,dpa-oh";
+			fsl,qman-frame-queues-oh = <0x64 1 0x65 1>;
+			fsl,fman-oh-port = <&fman0_oh1>;
+		};
+		dpa_fman0_oh2: dpa-fman0-oh@2 {
+			compatible = "fsl,dpa-oh";
+			fsl,qman-frame-queues-oh = <0x68 1 0x69 1>;
+			fsl,bman-buffer-pools = <&bp9>;
+			fsl,fman-oh-port = <&fman0_oh2>;
+		};
+		dpa_fman0_oh3: dpa-fman0-oh@3 {
+			compatible = "fsl,dpa-oh";
+			fsl,qman-frame-queues-oh = <0x70 1 0x71 1>;
+			fsl,bman-buffer-pools = <&bp9>;
+			fsl,fman-oh-port = <&fman0_oh3>;
+		};
+	};
+};
diff --git a/drivers/staging/fsl_dpa_offload/dts/p5020si-post.dtsi b/drivers/staging/fsl_dpa_offload/dts/p5020si-post.dtsi
new file mode 100644
index 0000000..4772553
--- /dev/null
+++ b/drivers/staging/fsl_dpa_offload/dts/p5020si-post.dtsi
@@ -0,0 +1,437 @@
+/*
+ * P5020/5010 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	compatible = "fsl,p5020-rev1.0-elbc", "simple-bus";
+	interrupts = <
+		25 2 0 0
+		16 2 1 19
+		>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+};
+
+/* controller at 0x200000 */
+&pci0 {
+	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 15>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 15>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x201000 */
+&pci1 {
+	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 14>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 14>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x202000 */
+&pci2 {
+	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 13>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 13>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+/* controller at 0x203000 */
+&pci3 {
+	compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	clock-frequency = <33333333>;
+	interrupts = <16 2 1 12>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <16 2 1 12>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+			>;
+	};
+};
+
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <16 2 1 11>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+
+	port2 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <2>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,dcsr-npc";
+		reg = <0x1000 0x1000 0x1000000 0x8000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0xB0000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-ddr@13000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr2>;
+		reg = <0x13000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@40000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x40000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@41000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x41000 0x1000>;
+	};
+};
+
+&bportals {
+/include/ "qoriq-bman1-portals.dtsi"
+};
+
+&qportals {
+/include/ "qoriq-qman1-portals.dtsi"
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <32>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	ddr2: memory-controller@9000 {
+		compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
+		reg = <0x9000 0x1000>;
+		interrupts = <16 2 1 22>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000
+		       0x11000 0x1000>;
+		interrupts = <16 2 1 27
+			      16 2 1 26>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x4000>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};
+
+	pins: global-utilities@e0e00 {
+		compatible = "fsl,qoriq-pin-control-1.0";
+		reg = <0xe0e00 0x200>;
+		#sleep-cells = <2>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+		reg = <0xe1000 0x1000>;
+		clock-frequency = <0>;
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,qoriq-rcpm-1.0";
+		reg = <0xe2000 0x1000>;
+		#sleep-cells = <1>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,p5020-serdes";
+		reg	   = <0xea000 0x1000>;
+	};
+
+/include/ "qoriq-dma-0.dtsi"
+/include/ "qoriq-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		sdhci,auto-cmd12;
+	};
+
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+			phy_type = "utmi";
+			port0;
+		};
+
+/include/ "qoriq-usb2-dr-0.dtsi"
+		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+			dr_mode = "host";
+			phy_type = "utmi";
+		};
+
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
+	};
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		compatible = "fsl,p5020-sata", "fsl,pq-sata-v2";
+	};
+/include/ "qoriq-sec4.2-0.dtsi"
+/include/ "qoriq-pme-0.dtsi"
+/include/ "qoriq-rman-0.dtsi"
+/include/ "qoriq-qman1.dtsi"
+/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman-0.dtsi"
+/include/ "qoriq-fman-0-1g-0.dtsi"
+/include/ "qoriq-fman-0-1g-1.dtsi"
+/include/ "qoriq-fman-0-1g-2.dtsi"
+/include/ "qoriq-fman-0-1g-3.dtsi"
+/include/ "qoriq-fman-0-1g-4.dtsi"
+	fman0: fman@400000 {
+		/* tx - 1g - 0 */
+		port@a8000 {
+			fsl,qman-channel-id = <0x41>;
+		};
+		/* tx - 1g - 1 */
+		port@a9000 {
+			fsl,qman-channel-id = <0x42>;
+		};
+		/* tx - 1g - 2 */
+		port@aa000 {
+			fsl,qman-channel-id = <0x43>;
+		};
+		/* tx - 1g - 3 */
+		port@ab000 {
+			fsl,qman-channel-id = <0x44>;
+		};
+		/* tx - 1g - 4 */
+		port@ac000 {
+			fsl,qman-channel-id = <0x45>;
+		};
+		/* tx - 10g - 0 */
+		port@b0000 {
+			fsl,qman-channel-id = <0x40>;
+		};
+		/* offline 0 */
+		port@81000 {
+			fsl,qman-channel-id = <0x46>;
+		};
+		/* offline 1 */
+		port@82000 {
+			fsl,qman-channel-id = <0x47>;
+		};
+		/* offline 2 */
+		port@83000 {
+			fsl,qman-channel-id = <0x48>;
+		};
+		/* offline 3 */
+		port@84000 {
+			fsl,qman-channel-id = <0x49>;
+		};
+		/* offline 4 */
+		port@85000 {
+			fsl,qman-channel-id = <0x4a>;
+		};
+		/* offline 5 */
+		port@86000 {
+			fsl,qman-channel-id = <0x4b>;
+		};
+	};
+
+/include/ "qoriq-raid1.0-0.dtsi"
+};