Rewind v3.13-rc3+ (78fd82238d0e5716) to v3.12

1 files changed, 151 insertions, 277 deletions

diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index dc52a3e..978dc5f 100644
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -30,13 +30,10 @@
 #define TC_3W_POLL_MAX_TRY_CNT 5
 
 static u8 MAC_REG_TABLE[][2] =	{
-	/*
-	 * PAGE 0:
-	 * 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in
-	 * HwConfigureRTL8185()
-	 * 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185().
-	 * 0x1F0~0x1F8  set in MacConfig_85BASIC()
-	 */
+	/*PAGA 0:	*/
+	/* 0x34(BRSR), 0xBE(RATE_FALLBACK_CTL), 0x1E0(ARFR) would set in HwConfigureRTL8185() */
+	/* 0x272(RFSW_CTRL), 0x1CE(AESMSK_QC) set in InitializeAdapter8185(). */
+	/* 0x1F0~0x1F8  set in MacConfig_85BASIC() */
 	{0x08, 0xae}, {0x0a, 0x72}, {0x5b, 0x42},
 	{0x84, 0x88}, {0x85, 0x24}, {0x88, 0x54}, {0x8b, 0xb8}, {0x8c, 0x03},
 	{0x8d, 0x40}, {0x8e, 0x00}, {0x8f, 0x00}, {0x5b, 0x18}, {0x91, 0x03},
@@ -47,20 +44,15 @@ static u8 MAC_REG_TABLE[][2] =	{
 	{0xfa, 0x00}, {0xfb, 0x00}, {0xfc, 0x96}, {0xfd, 0xa4}, {0xfe, 0x00},
 	{0xff, 0x00},
 
-	/*
-	 * PAGE 1:
-	 * For Flextronics system Logo PCIHCT failure:
-	 * 0x1C4~0x1CD set no-zero value to avoid PCI configuration
-	 * space 0x45[7]=1
-	 */
+	/*PAGE 1: */
+	/* For Flextronics system Logo PCIHCT failure: */
+	/* 0x1C4~0x1CD set no-zero value to avoid PCI configuration space 0x45[7]=1 */
 	{0x5e, 0x01},
 	{0x58, 0x00}, {0x59, 0x00}, {0x5a, 0x04}, {0x5b, 0x00}, {0x60, 0x24},
 	{0x61, 0x97}, {0x62, 0xF0}, {0x63, 0x09}, {0x80, 0x0F}, {0x81, 0xFF},
 	{0x82, 0xFF}, {0x83, 0x03},
-	/* lzm add 080826 */
-	{0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22},
-	/* lzm add 080826 */
-	{0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22},
+	{0xC4, 0x22}, {0xC5, 0x22}, {0xC6, 0x22}, {0xC7, 0x22}, {0xC8, 0x22}, /* lzm add 080826 */
+	{0xC9, 0x22}, {0xCA, 0x22}, {0xCB, 0x22}, {0xCC, 0x22}, {0xCD, 0x22}, /* lzm add 080826 */
 	{0xe2, 0x00},
 
 
@@ -74,24 +66,21 @@ static u8 MAC_REG_TABLE[][2] =	{
 	{0x8f, 0x3f}, {0xc4, 0xff}, {0xc5, 0xff}, {0xc6, 0xff}, {0xc7, 0xff},
 	{0xc8, 0x00}, {0xc9, 0x00}, {0xca, 0x80}, {0xcb, 0x00},
 
-	/* PAGE 0: */
+	/* PAGA 0: */
 	{0x5e, 0x00}, {0x9f, 0x03}
 	};
 
 
 static u8  ZEBRA_AGC[] = {
 	0,
-	0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76,
-	0x75, 0x74, 0x73, 0x72, 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A,
-	0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, 0x48, 0x47, 0x46, 0x45,
-	0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
-	0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
-	0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16, 0x17, 0x17, 0x18, 0x18,
-	0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
-	0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22,
-	0x22, 0x23, 0x23, 0x24, 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27,
-	0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
+	0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72,
+	0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62,
+	0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07,
+	0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16,
+	0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e,
+	0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24,
+	0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F
 	};
 
 static u32 ZEBRA_RF_RX_GAIN_TABLE[] = {
@@ -134,27 +123,19 @@ static u8 PlatformIORead1Byte(struct net_device *dev, u32 offset)
 static void PlatformIOWrite1Byte(struct net_device *dev, u32 offset, u8 data)
 {
 	write_nic_byte(dev, offset, data);
-	/*
-	 * To make sure write operation is completed,
-	 * 2005.11.09, by rcnjko.
-	 */
-	read_nic_byte(dev, offset);
+	read_nic_byte(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
 }
 
 static void PlatformIOWrite2Byte(struct net_device *dev, u32 offset, u16 data)
 {
 	write_nic_word(dev, offset, data);
-	/*
-	 * To make sure write operation is completed,
-	 *  2005.11.09, by rcnjko.
-	 */
-	read_nic_word(dev, offset);
+	read_nic_word(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
 }
 
 static void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
 {
 	if (offset == PhyAddr) {
-		/* For Base Band configuration. */
+	/* For Base Band configuration. */
 		unsigned char	cmdByte;
 		unsigned long	dataBytes;
 		unsigned char	idx;
@@ -165,17 +146,16 @@ static void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
 
 		/*
 		 *	071010, rcnjko:
-		 *	The critical section is only BB read/write race
-		 *	condition. Assumption:
-		 *	1. We assume NO one will access BB at DIRQL, otherwise,
-		 *	system will crash for
+		 *	The critical section is only BB read/write race condition.
+		 *	Assumption:
+		 *	1. We assume NO one will access BB at DIRQL, otherwise, system will crash for
 		 *	acquiring the spinlock in such context.
 		 *	2. PlatformIOWrite4Byte() MUST NOT be recursive.
 		 */
 		/* NdisAcquireSpinLock( &(pDevice->IoSpinLock) ); */
 
 		for (idx = 0; idx < 30; idx++) {
-			/* Make sure command bit is clear before access it. */
+		/* Make sure command bit is clear before access it. */
 			u1bTmp = PlatformIORead1Byte(dev, PhyAddr);
 			if ((u1bTmp & BIT7) == 0)
 				break;
@@ -184,19 +164,14 @@ static void PlatformIOWrite4Byte(struct net_device *dev, u32 offset, u32 data)
 		}
 
 		for (idx = 0; idx < 3; idx++)
-			PlatformIOWrite1Byte(dev, offset+1+idx,
-					     ((u8 *)&dataBytes)[idx]);
+			PlatformIOWrite1Byte(dev, offset+1+idx, ((u8 *)&dataBytes)[idx]);
 
 		write_nic_byte(dev, offset, cmdByte);
 
 		/* NdisReleaseSpinLock( &(pDevice->IoSpinLock) ); */
 	} else {
 		write_nic_dword(dev, offset, data);
-		/*
-		 * To make sure write operation is completed, 2005.11.09,
-		 *  by rcnjko.
-		 */
-		read_nic_dword(dev, offset);
+		read_nic_dword(dev, offset); /* To make sure write operation is completed, 2005.11.09, by rcnjko. */
 	}
 }
 
@@ -309,13 +284,9 @@ bool SetAntennaConfig87SE(struct net_device *dev,
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	bool   bAntennaSwitched = true;
-	/* 0x00 = disabled, 0x80 = enabled */
-	u8	ant_diversity_offset = 0x00;
+	u8	ant_diversity_offset = 0x00; /* 0x00 = disabled, 0x80 = enabled */
 
-	/*
-	 * printk("SetAntennaConfig87SE(): DefaultAnt(%d), bAntDiversity(%d)\n",
-	 * DefaultAnt, bAntDiversity);
-	 */
+	/* printk("SetAntennaConfig87SE(): DefaultAnt(%d), bAntDiversity(%d)\n", DefaultAnt, bAntDiversity); */
 
 	/* Threshold for antenna diversity. */
 	write_phy_cck(dev, 0x0c, 0x09); /* Reg0c : 09 */
@@ -329,27 +300,22 @@ bool SetAntennaConfig87SE(struct net_device *dev,
 
 		/* Config CCK RX antenna. */
 		write_phy_cck(dev, 0x11, 0xbb); /* Reg11 : bb */
-
-		/* Reg01 : 47 | ant_diversity_offset */
-		write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset);
+		write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset); /* Reg01 : 47 | ant_diversity_offset */
 
 		/* Config OFDM RX antenna. */
 		write_phy_ofdm(dev, 0x0D, 0x54);	/* Reg0d : 54 */
-		/* Reg18 : 32 */
-		write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset);
+		write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset);	/* Reg18 : 32 */
 	} else { /* main Antenna */
 		/* Mac register, main antenna */
 		write_nic_byte(dev, ANTSEL, 0x03);
 
 		/* Config CCK RX antenna.	*/
 		write_phy_cck(dev, 0x11, 0x9b); /* Reg11 : 9b */
-		/* Reg01 : 47 */
-		write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset);
+		write_phy_cck(dev, 0x01, 0x47|ant_diversity_offset); /* Reg01 : 47 */
 
 		/* Config OFDM RX antenna. */
 		write_phy_ofdm(dev, 0x0D, 0x5c); /* Reg0d : 5c */
-		/*Reg18 : 32 */
-		write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset);
+		write_phy_ofdm(dev, 0x18, 0x32|ant_diversity_offset); /*Reg18 : 32 */
 	}
 	priv->CurrAntennaIndex = DefaultAnt; /* Update default settings. */
 	return	bAntennaSwitched;
@@ -416,23 +382,18 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
 	RF_WriteReg(dev, 0x05, 0x059b);		mdelay(1);
 	RF_WriteReg(dev, 0x06, 0x0081);		mdelay(1);
 	RF_WriteReg(dev, 0x07, 0x01A0);		mdelay(1);
-/*
- * Don't write RF23/RF24 to make a difference between 87S C cut and D cut.
- * asked by SD3 stevenl.
- */
+/* Don't write RF23/RF24 to make a difference between 87S C cut and D cut. asked by SD3 stevenl. */
 	RF_WriteReg(dev, 0x0a, 0x0001);		mdelay(1);
 	RF_WriteReg(dev, 0x0b, 0x0418);		mdelay(1);
 
 	if (d_cut) {
 		RF_WriteReg(dev, 0x0c, 0x0fbe);		mdelay(1);
 		RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1);
-		/* RX LO buffer */
-		RF_WriteReg(dev, 0x0e, 0x0807);		mdelay(1);
+		RF_WriteReg(dev, 0x0e, 0x0807);		mdelay(1); /* RX LO buffer */
 	} else {
 		RF_WriteReg(dev, 0x0c, 0x0fbe);		mdelay(1);
 		RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1);
-		/* RX LO buffer */
-		RF_WriteReg(dev, 0x0e, 0x0806);		mdelay(1);
+		RF_WriteReg(dev, 0x0e, 0x0806);		mdelay(1); /* RX LO buffer */
 	}
 
 	RF_WriteReg(dev, 0x0f, 0x0acc);		mdelay(1);
@@ -447,24 +408,19 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
 
 	RF_WriteReg(dev, 0x05, 0x0203);		mdelay(1); /* 203, 343 */
 	RF_WriteReg(dev, 0x06, 0x0200);		mdelay(1); /* 400 */
-	/* switch to reg16-reg30, and HSSI disable 137 */
-	RF_WriteReg(dev, 0x00, 0x0137);		mdelay(1);
+	RF_WriteReg(dev, 0x00, 0x0137);		mdelay(1); /* switch to reg16-reg30, and HSSI disable 137 */
 	mdelay(10); /* Deay 10 ms. */		/* 0xfd */
 
-	/* Z4 synthesizer loop filter setting, 392 */
-	RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1);
+	RF_WriteReg(dev, 0x0d, 0x0008);		mdelay(1); /* Z4 synthesizer loop filter setting, 392 */
 	mdelay(10); /* Deay 10 ms. */		/* 0xfd */
 
-	/* switch to reg0-reg15, and HSSI disable */
-	RF_WriteReg(dev, 0x00, 0x0037);		mdelay(1);
+	RF_WriteReg(dev, 0x00, 0x0037);		mdelay(1); /* switch to reg0-reg15, and HSSI disable */
 	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
 
-	/* CBC on, Tx Rx disable, High gain */
-	RF_WriteReg(dev, 0x04, 0x0160);		mdelay(1);
+	RF_WriteReg(dev, 0x04, 0x0160);		mdelay(1); /* CBC on, Tx Rx disable, High gain */
 	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
 
-	/* Z4 setted channel 1 */
-	RF_WriteReg(dev, 0x07, 0x0080);		mdelay(1);
+	RF_WriteReg(dev, 0x07, 0x0080);		mdelay(1); /* Z4 setted channel 1 */
 	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
 
 	RF_WriteReg(dev, 0x02, 0x088D);		mdelay(1); /* LC calibration */
@@ -472,8 +428,7 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
 	mdelay(10);  /* Deay 10 ms. */		/* 0xfd	*/
 	mdelay(10);  /* Deay 10 ms. */		/* 0xfd	*/
 
-	/* switch to reg16-reg30 137, and HSSI disable 137 */
-	RF_WriteReg(dev, 0x00, 0x0137);		mdelay(1);
+	RF_WriteReg(dev, 0x00, 0x0137);		mdelay(1); /* switch to reg16-reg30 137, and HSSI disable 137 */
 	mdelay(10); /* Deay 10 ms. */		/* 0xfd	*/
 
 	RF_WriteReg(dev, 0x07, 0x0000);		mdelay(1);
@@ -487,58 +442,46 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
 	/* For crystal calibration, added by Roger, 2007.12.11. */
 	if (priv->bXtalCalibration) { /* reg 30.	*/
 	 /*
-	  *	enable crystal calibration.
-	  *	RF Reg[30], (1)Xin:[12:9], Xout:[8:5],  addr[4:0].
-	  *	(2)PA Pwr delay timer[15:14], default: 2.4us,
-	  *	set BIT15=0
-	  *	(3)RF signal on/off when calibration[13], default: on,
-	  *	set BIT13=0.
-	  *	So we should minus 4 BITs offset.
+ 	  *  enable crystal calibration.
+	  *		RF Reg[30], (1)Xin:[12:9], Xout:[8:5],  addr[4:0].
+	  *		(2)PA Pwr delay timer[15:14], default: 2.4us, set BIT15=0
+	  *		(3)RF signal on/off when calibration[13], default: on, set BIT13=0.
+	  *		So we should minus 4 BITs offset. 
 	  */
-		RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) |
-			    (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1);
+		RF_WriteReg(dev, 0x0f, (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9); mdelay(1);
 		printk("ZEBRA_Config_85BASIC_HardCode(): (%02x)\n",
-		      (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) |
-		       BIT11 | BIT9);
+		      (priv->XtalCal_Xin<<5) | (priv->XtalCal_Xout<<1) | BIT11 | BIT9);
 	} else {
 		/* using default value. Xin=6, Xout=6.	*/
 		RF_WriteReg(dev, 0x0f, 0x0acc);		mdelay(1);
 	}
-	/* switch to reg0-reg15, and HSSI enable */
-	RF_WriteReg(dev, 0x00, 0x00bf);		mdelay(1);
-	/* Rx BB start calibration, 00c//+edward */
-	RF_WriteReg(dev, 0x0d, 0x08df);		mdelay(1);
-	/* temperature meter off */
-	RF_WriteReg(dev, 0x02, 0x004d);		mdelay(1);
+
+	RF_WriteReg(dev, 0x00, 0x00bf);		mdelay(1); /* switch to reg0-reg15, and HSSI enable */
+	RF_WriteReg(dev, 0x0d, 0x08df);		mdelay(1); /* Rx BB start calibration, 00c//+edward */
+	RF_WriteReg(dev, 0x02, 0x004d);		mdelay(1); /* temperature meter off */
 	RF_WriteReg(dev, 0x04, 0x0975);		mdelay(1); /* Rx mode */
 	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
 	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
 	mdelay(10);	/* Deay 10 ms.*/	/* 0xfe	*/
-	/* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x00, 0x0197);		mdelay(1);
-	/* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x05, 0x05ab);		mdelay(1);
-	/* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x00, 0x009f);		mdelay(1);
-	/* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x01, 0x0000);		mdelay(1);
-	/* Rx mode*/	/*+edward */
-	RF_WriteReg(dev, 0x02, 0x0000);		mdelay(1);
+	RF_WriteReg(dev, 0x00, 0x0197);		mdelay(1); /* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x05, 0x05ab);		mdelay(1); /* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x00, 0x009f);		mdelay(1); /* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x01, 0x0000);		mdelay(1); /* Rx mode*/	/*+edward */
+	RF_WriteReg(dev, 0x02, 0x0000);		mdelay(1); /* Rx mode*/	/*+edward */
 	/* power save parameters. */
 	u1b24E = read_nic_byte(dev, 0x24E);
 	write_nic_byte(dev, 0x24E, (u1b24E & (~(BIT5|BIT6))));
 
-	/*======================================================================
+	/*=============================================================================
 	 *
-	 *======================================================================
+	 *===========================================================================
 	 * CCKCONF.TXT
-	 *======================================================================
+	 *===========================================================================
 	 *
 	 *	[POWER SAVE] Power Saving Parameters by jong. 2007-11-27
 	 *	CCK reg0x00[7]=1'b1 :power saving for TX (default)
 	 *	CCK reg0x00[6]=1'b1: power saving for RX (default)
-	 *	CCK reg0x06[4]=1'b1: turn off channel estimation related
-	 *	circuits if not doing channel estimation.
+	 *	CCK reg0x06[4]=1'b1: turn off channel estimation related circuits if not doing channel estimation.
 	 *	CCK reg0x06[3]=1'b1: turn off unused circuits before cca = 1
 	 *	CCK reg0x06[2]=1'b1: turn off cck's circuit if macrst =0
 	 */
@@ -558,9 +501,9 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
 
 
 	/*
-	 *======================================================================
+	 *===========================================================================
 	 *	AGC.txt
-	 *======================================================================
+	 *===========================================================================
 	 */
 
 	write_phy_ofdm(dev, 0x00, 0x12);
@@ -583,11 +526,11 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
 	PlatformIOWrite4Byte(dev, PhyAddr, 0x00001080);	/* Annie, 2006-05-05 */
 
 	/*
-	 *======================================================================
+	 *===========================================================================
 	 *
-	 *======================================================================
+	 *===========================================================================
 	 * OFDMCONF.TXT
-	 *======================================================================
+	 *===========================================================================
 	 */
 
 	for (i = 0; i < 60; i++) {
@@ -601,16 +544,12 @@ static void ZEBRA_Config_85BASIC_HardCode(struct net_device *dev)
 	}
 
 	/*
-	 *======================================================================
+	 *===========================================================================
 	 * by amy for antenna
-	 *======================================================================
+	 *===========================================================================
 	 */
-	/*
-	 * Config Sw/Hw  Combinational Antenna Diversity. Added by Roger,
-	 * 2008.02.26.
-	 */
-	SetAntennaConfig87SE(dev, priv->bDefaultAntenna1,
-			     priv->bSwAntennaDiverity);
+	/* Config Sw/Hw  Combinational Antenna Diversity. Added by Roger, 2008.02.26.	*/
+	SetAntennaConfig87SE(dev, priv->bDefaultAntenna1, priv->bSwAntennaDiverity);
 }
 
 
@@ -621,8 +560,7 @@ void UpdateInitialGain(struct net_device *dev)
 	/* lzm add 080826 */
 	if (priv->eRFPowerState != eRfOn) {
 		/*	Don't access BB/RF under disable PLL situation.
-		 *	RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain -
-		 *	pHalData->eRFPowerState!=eRfOn\n"));
+		 *	RT_TRACE(COMP_DIG, DBG_LOUD, ("UpdateInitialGain - pHalData->eRFPowerState!=eRfOn\n"));
 		 *	Back to the original state
 		 */
 		priv->InitialGain = priv->InitialGainBackUp;
@@ -697,7 +635,7 @@ static void InitTxPwrTracking87SE(struct net_device *dev)
 	u4bRfReg = RF_ReadReg(dev, 0x02);
 
 	/* Enable Thermal meter indication.	*/
-	RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN);		mdelay(1);
+	RF_WriteReg(dev, 0x02, u4bRfReg|PWR_METER_EN);			mdelay(1);
 }
 
 static void PhyConfig8185(struct net_device *dev)
@@ -707,18 +645,16 @@ static void PhyConfig8185(struct net_device *dev)
 	   priv->RFProgType = read_nic_byte(dev, CONFIG4) & 0x03;
 	/*  RF config */
 	ZEBRA_Config_85BASIC_HardCode(dev);
-	/* Set default initial gain state to 4, approved by SD3 DZ, by Bruce,
-	 * 2007-06-06.
-	 */
+	/* Set default initial gain state to 4, approved by SD3 DZ, by Bruce, 2007-06-06. */
 	if (priv->bDigMechanism) {
 		if (priv->InitialGain == 0)
 			priv->InitialGain = 4;
 	}
 
 	/*
-	 *	Enable thermal meter indication to implement TxPower tracking
-	 *	on 87SE. We initialize thermal meter here to avoid unsuccessful
-	 *	configuration. Added by Roger, 2007.12.11.
+	 *	Enable thermal meter indication to implement TxPower tracking on 87SE.
+	 *	We initialize thermal meter here to avoid unsuccessful configuration.
+	 *	Added by Roger, 2007.12.11.
 	 */
 	if (priv->bTxPowerTrack)
 		InitTxPwrTracking87SE(dev);
@@ -731,10 +667,7 @@ static void PhyConfig8185(struct net_device *dev)
 
 static void HwConfigureRTL8185(struct net_device *dev)
 {
-	/*
-	 * RTL8185_TODO: Determine Retrylimit, TxAGC,
-	 * AutoRateFallback control.
-	 */
+	/* RTL8185_TODO: Determine Retrylimit, TxAGC, AutoRateFallback control. */
 	u8 bUNIVERSAL_CONTROL_RL = 0;
 	u8 bUNIVERSAL_CONTROL_AGC = 1;
 	u8 bUNIVERSAL_CONTROL_ANT = 1;
@@ -758,7 +691,7 @@ static void HwConfigureRTL8185(struct net_device *dev)
 		write_nic_byte(dev, OFDM_TXAGC, 128);
 		val8 = val8 & 0xfe;
 	} else {
-		val8 = val8 | 0x01;
+		val8 = val8 | 0x01 ;
 	}
 
 
@@ -782,9 +715,7 @@ static void HwConfigureRTL8185(struct net_device *dev)
 	if (bAUTO_RATE_FALLBACK_CTL) {
 		val8 |= RATE_FALLBACK_CTL_ENABLE | RATE_FALLBACK_CTL_AUTO_STEP1;
 
-		/* <RJ_TODO_8185B> We shall set up the ARFR according
-		 * to user's setting.
-		 */
+		/* <RJ_TODO_8185B> We shall set up the ARFR according to user's setting. */
 		PlatformIOWrite2Byte(dev, ARFR, 0x0fff); /* set 1M ~ 54Mbps. */
 	}
 	write_nic_byte(dev, RATE_FALLBACK, val8);
@@ -793,9 +724,9 @@ static void HwConfigureRTL8185(struct net_device *dev)
 static void MacConfig_85BASIC_HardCode(struct net_device *dev)
 {
 	/*
-	 *======================================================================
+	 *==========================================================================
 	 * MACREG.TXT
-	 *======================================================================
+	 *==========================================================================
 	 */
 	int nLinesRead = 0;
 	u32 u4bRegOffset, u4bRegValue, u4bPageIndex = 0;
@@ -814,7 +745,7 @@ static void MacConfig_85BASIC_HardCode(struct net_device *dev)
 
 		write_nic_byte(dev, u4bRegOffset, (u8)u4bRegValue);
 	}
-	/* ================================================================= */
+	/* ============================================================================ */
 }
 
 static void MacConfig_85BASIC(struct net_device *dev)
@@ -823,14 +754,12 @@ static void MacConfig_85BASIC(struct net_device *dev)
 	u8			u1DA;
 	MacConfig_85BASIC_HardCode(dev);
 
-	/* ================================================================= */
+	/* ============================================================================ */
 
 	/* Follow TID_AC_MAP of WMac. */
 	write_nic_word(dev, TID_AC_MAP, 0xfa50);
 
-	/* Interrupt Migration, Jong suggested we use set 0x0000 first,
-	 * 2005.12.14, by rcnjko.
-	 */
+	/* Interrupt Migration, Jong suggested we use set 0x0000 first, 2005.12.14, by rcnjko. */
 	write_nic_word(dev, IntMig, 0x0000);
 
 	/* Prevent TPC to cause CRC error. Added by Annie, 2006-06-10. */
@@ -839,11 +768,7 @@ static void MacConfig_85BASIC(struct net_device *dev)
 	PlatformIOWrite1Byte(dev, 0x1F8, 0x00);
 
 	/* Asked for by SD3 CM Lin, 2006.06.27, by rcnjko. */
-
-	/*
-	 *  power save parameter based on
-	 * "87SE power save parameters 20071127.doc", as follow.
-	 */
+	/* power save parameter based on "87SE power save parameters 20071127.doc", as follow. */
 
 	/* Enable DA10 TX power saving */
 	u1DA = read_nic_byte(dev, PHYPR);
@@ -878,45 +803,31 @@ static void ActUpdateChannelAccessSetting(struct net_device *dev,
 
 	/*
 	 *	<RJ_TODO_8185B>
-	 *	TODO: We still don't know how to set up these registers,
-	 *	just follow WMAC to verify 8185B FPAG.
+	 *	TODO: We still don't know how to set up these registers, just follow WMAC to
+	 *	verify 8185B FPAG.
 	 *
 	 *	<RJ_TODO_8185B>
 	 *	Jong said CWmin/CWmax register are not functional in 8185B,
-	 *	so we shall fill channel access realted register into AC
-	 *	parameter registers,
+	 *	so we shall fill channel access realted register into AC parameter registers,
 	 *	even in nQBss.
 	 */
-
-	/* Suggested by Jong, 2005.12.08. */
-	ChnlAccessSetting->SIFS_Timer = 0x22;
+	ChnlAccessSetting->SIFS_Timer = 0x22; /* Suggested by Jong, 2005.12.08. */
 	ChnlAccessSetting->DIFS_Timer = 0x1C; /* 2006.06.02, by rcnjko. */
 	ChnlAccessSetting->SlotTimeTimer = 9; /* 2006.06.02, by rcnjko. */
-	/*
-	 * Suggested by wcchu, it is the default value of EIFS register,
-	 * 2005.12.08.
-	 */
-	ChnlAccessSetting->EIFS_Timer = 0x5B;
+	ChnlAccessSetting->EIFS_Timer = 0x5B; /* Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */
 	ChnlAccessSetting->CWminIndex = 3; /* 2006.06.02, by rcnjko. */
 	ChnlAccessSetting->CWmaxIndex = 7; /* 2006.06.02, by rcnjko. */
 
 	write_nic_byte(dev, SIFS, ChnlAccessSetting->SIFS_Timer);
-	/*
-	 * Rewrited from directly use PlatformEFIOWrite1Byte(),
-	 * by Annie, 2006-03-29.
-	 */
-	write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer);
+	write_nic_byte(dev, SLOT, ChnlAccessSetting->SlotTimeTimer); /* Rewrited from directly use PlatformEFIOWrite1Byte(), by Annie, 2006-03-29. */
 
 	write_nic_byte(dev, EIFS, ChnlAccessSetting->EIFS_Timer);
 
-	/*
-	 * <RJ_EXPR_QOS> Suggested by wcchu, it is the default value of EIFS
-	 * register, 2005.12.08.
-	 */
-	write_nic_byte(dev, AckTimeOutReg, 0x5B);
+	write_nic_byte(dev, AckTimeOutReg, 0x5B); /* <RJ_EXPR_QOS> Suggested by wcchu, it is the default value of EIFS register, 2005.12.08. */
 
-	for (eACI = 0; eACI < AC_MAX; eACI++)
+	for (eACI = 0; eACI < AC_MAX; eACI++) {
 		write_nic_byte(dev, ACM_CONTROL, 0);
+	}
 }
 
 static void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
@@ -926,10 +837,7 @@ static void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
 	u8	btSupportedWirelessMode = GetSupportedWirelessMode8185(dev);
 
 	if ((btWirelessMode & btSupportedWirelessMode) == 0)	{
-		/*
-		 * Don't switch to unsupported wireless mode, 2006.02.15,
-		 * by rcnjko.
-		 */
+		/* Don't switch to unsupported wireless mode, 2006.02.15, by rcnjko. */
 		DMESGW("ActSetWirelessMode8185(): WirelessMode(%d) is not supported (%d)!\n",
 			btWirelessMode, btSupportedWirelessMode);
 		return;
@@ -951,11 +859,11 @@ static void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
 		}
 	}
 
-	/*
-	 * 2. Swtich band: RF or BB specific actions,
-	 * for example, refresh tables in omc8255, or change initial gain if
-	 * necessary. Nothing to do for Zebra to switch band. Update current
-	 * wireless mode if we switch to specified band successfully.
+	/* 
+ 	 * 2. Swtich band: RF or BB specific actions,
+	 * for example, refresh tables in omc8255, or change initial gain if necessary.
+	 * Nothing to do for Zebra to switch band.
+	 * Update current wireless mode if we switch to specified band successfully. 
 	 */
 
 	ieee->mode = (WIRELESS_MODE)btWirelessMode;
@@ -968,8 +876,7 @@ static void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
 	else if (ieee->mode == WIRELESS_MODE_G)
 		DMESG("WIRELESS_MODE_G\n");
 
-	ActUpdateChannelAccessSetting(dev, ieee->mode,
-				      &priv->ChannelAccessSetting);
+	ActUpdateChannelAccessSetting( dev, ieee->mode, &priv->ChannelAccessSetting);
 }
 
 void rtl8185b_irq_enable(struct net_device *dev)
@@ -985,7 +892,7 @@ static void MgntDisconnectIBSS(struct net_device *dev)
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	u8 i;
 
-	for (i = 0; i < 6; i++)
+	for (i = 0; i < 6 ; i++)
 		priv->ieee80211->current_network.bssid[i] = 0x55;
 
 
@@ -994,12 +901,11 @@ static void MgntDisconnectIBSS(struct net_device *dev)
 	/*
 	 *	Stop Beacon.
 	 *
-	 *	Vista add a Adhoc profile, HW radio off until
-	 *	OID_DOT11_RESET_REQUEST Driver would set MSR=NO_LINK,
-	 *	then HW Radio ON, MgntQueue Stuck. Because Bcn DMA isn't
-	 *	complete, mgnt queue would stuck until Bcn packet send.
+	 *	Vista add a Adhoc profile, HW radio off until OID_DOT11_RESET_REQUEST
+	 *	Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck.
+	 *	Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send.
 	 *
-	 *	Disable Beacon Queue Own bit, suggested by jong
+	 *	Disable Beacon Queue Own bit, suggested by jong	
 	 */
 	ieee80211_stop_send_beacons(priv->ieee80211);
 
@@ -1032,14 +938,12 @@ static void MgntDisconnectAP(struct net_device *dev, u8 asRsn)
 	 * Commented out by rcnjko, 2005.01.27:
 	 * I move SecClearAllKeys() to MgntActSet_802_11_DISASSOCIATE().
 	 *
-	 *	2004/09/15, kcwu, the key should be cleared, or the new
-	 *	handshaking will not success
+	 *	2004/09/15, kcwu, the key should be cleared, or the new handshaking will not success
 	 *
-	 *	In WPA WPA2 need to Clear all key ... because new key will set
-	 *	after new handshaking. 2004.10.11, by rcnjko.
+	 *	In WPA WPA2 need to Clear all key ... because new key will set after new handshaking.
+	 *	2004.10.11, by rcnjko. 
 	 */
-	MlmeDisassociateRequest(dev, priv->ieee80211->current_network.bssid,
-				asRsn);
+	MlmeDisassociateRequest(dev, priv->ieee80211->current_network.bssid, asRsn);
 
 	priv->ieee80211->state = IEEE80211_NOLINK;
 }
@@ -1060,13 +964,11 @@ static bool MgntDisconnect(struct net_device *dev, u8 asRsn)
 
 		if (priv->ieee80211->iw_mode == IW_MODE_INFRA) {
 			/*
-			 *	We clear key here instead of MgntDisconnectAP()
-			 *	because that MgntActSet_802_11_DISASSOCIATE()
-			 *	is an interface called by OS, e.g.
-			 *	OID_802_11_DISASSOCIATE in Windows while as
-			 *	MgntDisconnectAP() is used to handle
-			 *	disassociation related things to AP, e.g. send
-			 *	Disassoc frame to AP.  2005.01.27, by rcnjko.
+ 			 * 	We clear key here instead of MgntDisconnectAP() because that
+			 *	MgntActSet_802_11_DISASSOCIATE() is an interface called by OS,
+			 *	e.g. OID_802_11_DISASSOCIATE in Windows while as MgntDisconnectAP() is
+			 *	used to handle disassociation related things to AP, e.g. send Disassoc
+			 *	frame to AP.  2005.01.27, by rcnjko. 
 			 */
 			MgntDisconnectAP(dev, asRsn);
 		}
@@ -1077,14 +979,12 @@ static bool MgntDisconnect(struct net_device *dev, u8 asRsn)
 /*
  *	Description:
  *		Chang RF Power State.
- *		Note that, only MgntActSet_RF_State() is allowed to set
- *		HW_VAR_RF_STATE.
+ *		Note that, only MgntActSet_RF_State() is allowed to set HW_VAR_RF_STATE.
  *
  *	Assumption:
  *		PASSIVE LEVEL.
  */
-static bool SetRFPowerState(struct net_device *dev,
-		RT_RF_POWER_STATE eRFPowerState)
+static bool SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState)
 {
 	struct	r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	bool	bResult = false;
@@ -1097,8 +997,7 @@ static bool SetRFPowerState(struct net_device *dev,
 	return bResult;
 }
 
-bool MgntActSet_RF_State(struct net_device *dev,
-		RT_RF_POWER_STATE StateToSet, u32 ChangeSource)
+bool MgntActSet_RF_State(struct net_device *dev, RT_RF_POWER_STATE StateToSet, u32 ChangeSource)
 {
 	struct	r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	bool	bActionAllowed = false;
@@ -1107,9 +1006,8 @@ bool MgntActSet_RF_State(struct net_device *dev,
 	u16	RFWaitCounter = 0;
 	unsigned long flag;
 	/*
-	 *	Prevent the race condition of RF state change. By Bruce,
-	 *	2007-11-28. Only one thread can change the RF state at one time,
-	 *	and others should wait to be executed.
+	 *	Prevent the race condition of RF state change. By Bruce, 2007-11-28.
+	 *	Only one thread can change the RF state at one time, and others should wait to be executed.
 	 */
 	while (true) {
 		spin_lock_irqsave(&priv->rf_ps_lock, flag);
@@ -1120,10 +1018,7 @@ bool MgntActSet_RF_State(struct net_device *dev,
 				RFWaitCounter++;
 				udelay(1000); /* 1 ms	*/
 
-				/*
-				 *	Wait too long, return FALSE to avoid
-				 *	to be stuck here.
-				 */
+				/* Wait too long, return FALSE to avoid to be stuck here. */
 				if (RFWaitCounter > 1000) { /* 1sec */
 					printk("MgntActSet_RF_State(): Wait too long to set RF\n");
 					/* TODO: Reset RF state? */
@@ -1141,10 +1036,8 @@ bool MgntActSet_RF_State(struct net_device *dev,
 	switch (StateToSet) {
 	case eRfOn:
 		/*
-		 *	Turn On RF no matter the IPS setting because we need to
-		 *	update the RF state to Ndis under Vista, or the Windows
-		 *	does not allow the driver to perform site survey any
-		 *	more. By Bruce, 2007-10-02.
+		 *	Turn On RF no matter the IPS setting because we need to update the RF state to Ndis under Vista, or
+		 *	the Windows does not allow the driver to perform site survey any more. By Bruce, 2007-10-02.
 		 */
 		priv->RfOffReason &= (~ChangeSource);
 
@@ -1152,8 +1045,7 @@ bool MgntActSet_RF_State(struct net_device *dev,
 			priv->RfOffReason = 0;
 			bActionAllowed = true;
 
-			if (rtState == eRfOff &&
-			    ChangeSource >= RF_CHANGE_BY_HW)
+			if (rtState == eRfOff && ChangeSource >= RF_CHANGE_BY_HW)
 				bConnectBySSID = true;
 		}
 		break;
@@ -1164,18 +1056,13 @@ bool MgntActSet_RF_State(struct net_device *dev,
 		if (priv->RfOffReason > RF_CHANGE_BY_IPS) {
 			/*
 			 *	060808, Annie:
-			 *	Disconnect to current BSS when radio off.
-			 *	Asked by QuanTa.
+			 *	Disconnect to current BSS when radio off. Asked by QuanTa.
 			 *
-			 *	Calling MgntDisconnect() instead of
-			 *	MgntActSet_802_11_DISASSOCIATE(), because
-			 *	we do NOT need to set ssid to dummy ones.
+			 *	Calling MgntDisconnect() instead of MgntActSet_802_11_DISASSOCIATE(),
+			 *	because we do NOT need to set ssid to dummy ones.
 			 */
 			MgntDisconnect(dev, disas_lv_ss);
-			/*
-			 *	Clear content of bssDesc[] and bssDesc4Query[]
-			 *	to avoid reporting old bss to UI.
-			 */
+			/* Clear content of bssDesc[] and bssDesc4Query[] to avoid reporting old bss to UI. */
 		}
 
 		priv->RfOffReason |= ChangeSource;
@@ -1205,21 +1092,18 @@ static void InactivePowerSave(struct net_device *dev)
 {
 	struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
 	/*
-	 *	This flag "bSwRfProcessing", indicates the status of IPS
-	 *	procedure, should be set if the IPS workitem is really
-	 *	scheduled. The old code, sets this flag before scheduling the
-	 *	IPS workitem and however, at the same time the previous IPS
-	 *	workitem did not end yet, fails to schedule the current
-	 *	workitem. Thus, bSwRfProcessing blocks the IPS procedure of
-	 *	switching RF.
+	 *	This flag "bSwRfProcessing", indicates the status of IPS procedure, should be set if the IPS workitem
+	 *	is really scheduled.
+	 *	The old code, sets this flag before scheduling the IPS workitem and however, at the same time the
+	 *	previous IPS workitem did not end yet, fails to schedule the current workitem. Thus, bSwRfProcessing
+	 *	blocks the IPS procedure of switching RF.
 	 */
 	priv->bSwRfProcessing = true;
 
 	MgntActSet_RF_State(dev, priv->eInactivePowerState, RF_CHANGE_BY_IPS);
 
 	/*
-	 *	To solve CAM values miss in RF OFF, rewrite CAM values after
-	 *	RF ON. By Bruce, 2007-09-20.
+	 *	To solve CAM values miss in RF OFF, rewrite CAM values after RF ON. By Bruce, 2007-09-20.
 	 */
 
 	priv->bSwRfProcessing = false;
@@ -1238,10 +1122,10 @@ void IPSEnter(struct net_device *dev)
 
 		/*
 		 *	Do not enter IPS in the following conditions:
-		 *	(1) RF is already OFF or
-		 *	Sleep (2) bSwRfProcessing (indicates the IPS is still
-		 *	under going) (3) Connected (only disconnected can
-		 *	trigger IPS)(4) IBSS (send Beacon)
+		 *	(1) RF is already OFF or Sleep
+		 *	(2) bSwRfProcessing (indicates the IPS is still under going)
+		 *	(3) Connected (only disconnected can trigger IPS)
+		 *	(4) IBSS (send Beacon)
 		 *	(5) AP mode (send Beacon)
 		 */
 		if (rtState == eRfOn && !priv->bSwRfProcessing
@@ -1257,9 +1141,7 @@ void IPSLeave(struct net_device *dev)
 	RT_RF_POWER_STATE rtState;
 	if (priv->bInactivePs) {
 		rtState = priv->eRFPowerState;
-		if ((rtState == eRfOff || rtState == eRfSleep) &&
-		    !priv->bSwRfProcessing
-		    && priv->RfOffReason <= RF_CHANGE_BY_IPS) {
+		if ((rtState == eRfOff || rtState == eRfSleep) && (!priv->bSwRfProcessing) && priv->RfOffReason <= RF_CHANGE_BY_IPS) {
 			priv->eInactivePowerState = eRfOn;
 			InactivePowerSave(dev);
 		}
@@ -1288,32 +1170,27 @@ void rtl8185b_adapter_start(struct net_device *dev)
 	HwConfigureRTL8185(dev);
 	write_nic_dword(dev, MAC0, ((u32 *)dev->dev_addr)[0]);
 	write_nic_word(dev, MAC4, ((u32 *)dev->dev_addr)[1] & 0xffff);
-	/* default network type to 'No Link' */
-	write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3);
+	write_nic_byte(dev, MSR, read_nic_byte(dev, MSR) & 0xf3); /* default network type to 'No Link' */
 	write_nic_word(dev, BcnItv, 100);
 	write_nic_word(dev, AtimWnd, 2);
 	PlatformIOWrite2Byte(dev, FEMR, 0xFFFF);
 	write_nic_byte(dev, WPA_CONFIG, 0);
 	MacConfig_85BASIC(dev);
-	/* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07,
-	 * by rcnjko.
-	 */
+	/* Override the RFSW_CTRL (MAC offset 0x272-0x273), 2006.06.07, by rcnjko. */
 	/* BT_DEMO_BOARD type */
 	PlatformIOWrite2Byte(dev, RFSW_CTRL, 0x569a);
 
 	/*
-	 *---------------------------------------------------------------------
+	 *---------------------------------------------------------------------------
 	 *	Set up PHY related.
-	 *---------------------------------------------------------------------
+	 *---------------------------------------------------------------------------
 	 */
 	/* Enable Config3.PARAM_En to revise AnaaParm. */
 	write_nic_byte(dev, CR9346, 0xc0); /* enable config register write */
 	tmpu8 = read_nic_byte(dev, CONFIG3);
 	write_nic_byte(dev, CONFIG3, (tmpu8 | CONFIG3_PARM_En));
 	/* Turn on Analog power. */
-	/* Asked for by William, otherwise, MAC 3-wire can't work,
-	 * 2006.06.27, by rcnjko.
-	 */
+	/* Asked for by William, otherwise, MAC 3-wire can't work, 2006.06.27, by rcnjko. */
 	write_nic_dword(dev, ANAPARAM2, ANAPARM2_ASIC_ON);
 	write_nic_dword(dev, ANAPARAM, ANAPARM_ASIC_ON);
 	write_nic_word(dev, ANAPARAM3, 0x0010);
@@ -1348,8 +1225,7 @@ void rtl8185b_adapter_start(struct net_device *dev)
 	/*
 	 *	We assume RegWirelessMode has already been initialized before,
 	 *	however, we has to validate the wireless mode here and provide a
-	 *	reasonable initialized value if necessary. 2005.01.13,
-	 *	by rcnjko.
+	 *	reasonable initialized value if necessary. 2005.01.13, by rcnjko.
 	 */
 	SupportedWirelessMode = GetSupportedWirelessMode8185(dev);
 	if ((ieee->mode != WIRELESS_MODE_B) &&
@@ -1396,15 +1272,14 @@ void rtl8185b_adapter_start(struct net_device *dev)
 		MgntActSet_RF_State(dev, eRfOn, 0);
 	}
 		/*
-		 * If inactive power mode is enabled, disable rf while in
-		 * disconnected state.
+		 *	If inactive power mode is enabled, disable rf while in disconnected state.
 		 */
 	if (priv->bInactivePs)
 		MgntActSet_RF_State(dev , eRfOff, RF_CHANGE_BY_IPS);
 
 	ActSetWirelessMode8185(dev, (u8)(InitWirelessMode));
 
-	/* ----------------------------------------------------------------- */
+	/* ----------------------------------------------------------------------------- */
 
 	rtl8185b_irq_enable(dev);
 
@@ -1421,15 +1296,14 @@ void rtl8185b_rx_enable(struct net_device *dev)
 	if (dev->flags & IFF_PROMISC)
 		DMESG("NIC in promisc mode");
 
-	if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || dev->flags &
-	    IFF_PROMISC) {
+	if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || \
+	   dev->flags & IFF_PROMISC) {
 		priv->ReceiveConfig = priv->ReceiveConfig & (~RCR_APM);
 		priv->ReceiveConfig = priv->ReceiveConfig | RCR_AAP;
 	}
 
 	if (priv->ieee80211->iw_mode == IW_MODE_MONITOR)
-		priv->ReceiveConfig = priv->ReceiveConfig | RCR_ACF |
-				      RCR_APWRMGT | RCR_AICV;
+		priv->ReceiveConfig = priv->ReceiveConfig | RCR_ACF | RCR_APWRMGT | RCR_AICV;
 
 
 	if (priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR)