Merge 3.8-rc5 into driver-core-next

This resolves a gpio driver merge issue pointed out in linux-next.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

8 files changed, 61 insertions, 8 deletions

diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index d085e3a..f932043 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -300,6 +300,12 @@ static const struct serial8250_config uart_config[] = {
 				  UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00,
 		.flags		= UART_CAP_FIFO,
 	},
+	[PORT_BRCM_TRUMANAGE] = {
+		.name		= "TruManage",
+		.fifo_size	= 1,
+		.tx_loadsz	= 1024,
+		.flags		= UART_CAP_HFIFO,
+	},
 	[PORT_8250_CIR] = {
 		.name		= "CIR port"
 	}
@@ -1490,6 +1496,11 @@ void serial8250_tx_chars(struct uart_8250_port *up)
 		port->icount.tx++;
 		if (uart_circ_empty(xmit))
 			break;
+		if (up->capabilities & UART_CAP_HFIFO) {
+			if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) !=
+			    BOTH_EMPTY)
+				break;
+		}
 	} while (--count > 0);
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 3b4ea84..12caa12 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -40,6 +40,7 @@ struct serial8250_config {
 #define UART_CAP_AFE	(1 << 11)	/* MCR-based hw flow control */
 #define UART_CAP_UUE	(1 << 12)	/* UART needs IER bit 6 set (Xscale) */
 #define UART_CAP_RTOIE	(1 << 13)	/* UART needs IER bit 4 set (Xscale, Tegra) */
+#define UART_CAP_HFIFO	(1 << 14)	/* UART has a "hidden" FIFO */
 
 #define UART_BUG_QUOT	(1 << 0)	/* UART has buggy quot LSB */
 #define UART_BUG_TXEN	(1 << 1)	/* UART has buggy TX IIR status */
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 1d0dba2..096d2ef 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -79,7 +79,7 @@ static int dw8250_handle_irq(struct uart_port *p)
 	} else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
 		/* Clear the USR and write the LCR again. */
 		(void)p->serial_in(p, UART_USR);
-		p->serial_out(p, d->last_lcr, UART_LCR);
+		p->serial_out(p, UART_LCR, d->last_lcr);
 
 		return 1;
 	}
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 26b9dc0..a27a98e 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1085,6 +1085,18 @@ pci_omegapci_setup(struct serial_private *priv,
 	return setup_port(priv, port, 2, idx * 8, 0);
 }
 
+static int
+pci_brcm_trumanage_setup(struct serial_private *priv,
+			 const struct pciserial_board *board,
+			 struct uart_8250_port *port, int idx)
+{
+	int ret = pci_default_setup(priv, board, port, idx);
+
+	port->port.type = PORT_BRCM_TRUMANAGE;
+	port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+	return ret;
+}
+
 static int skip_tx_en_setup(struct serial_private *priv,
 			const struct pciserial_board *board,
 			struct uart_8250_port *port, int idx)
@@ -1301,9 +1313,10 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_VENDOR_ID_AGESTAR		0x5372
 #define PCI_DEVICE_ID_AGESTAR_9375	0x6872
 #define PCI_VENDOR_ID_ASIX		0x9710
-#define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0019
 #define PCI_DEVICE_ID_COMMTECH_4224PCIE	0x0020
 #define PCI_DEVICE_ID_COMMTECH_4228PCIE	0x0021
+#define PCI_DEVICE_ID_COMMTECH_4222PCIE	0x0022
+#define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
 
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
@@ -1954,6 +1967,17 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.setup		= pci_xr17v35x_setup,
 	},
 	/*
+	 * Broadcom TruManage (NetXtreme)
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_BROADCOM,
+		.device		= PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= pci_brcm_trumanage_setup,
+	},
+
+	/*
 	 * Default "match everything" terminator entry
 	 */
 	{
@@ -2148,6 +2172,7 @@ enum pci_board_num_t {
 	pbn_ce4100_1_115200,
 	pbn_omegapci,
 	pbn_NETMOS9900_2s_115200,
+	pbn_brcm_trumanage,
 };
 
 /*
@@ -2246,7 +2271,7 @@ static struct pciserial_board pci_boards[] = {
 
 	[pbn_b0_8_1152000_200] = {
 		.flags		= FL_BASE0,
-		.num_ports	= 2,
+		.num_ports	= 8,
 		.base_baud	= 1152000,
 		.uart_offset	= 0x200,
 	},
@@ -2892,6 +2917,12 @@ static struct pciserial_board pci_boards[] = {
 		.num_ports	= 2,
 		.base_baud	= 115200,
 	},
+	[pbn_brcm_trumanage] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.reg_shift	= 2,
+		.base_baud	= 115200,
+	},
 };
 
 static const struct pci_device_id blacklist[] = {
@@ -4471,6 +4502,13 @@ static struct pci_device_id serial_pci_tbl[] = {
 		pbn_omegapci },
 
 	/*
+	 * Broadcom TruManage
+	 */
+	{	PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BROADCOM_TRUMANAGE,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_brcm_trumanage },
+
+	/*
 	 * AgeStar as-prs2-009
 	 */
 	{	PCI_VENDOR_ID_AGESTAR, PCI_DEVICE_ID_AGESTAR_9375,
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index 675d94a..8cb6d8d 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -637,6 +637,7 @@ static void ifx_port_shutdown(struct tty_port *port)
 
 	clear_bit(IFX_SPI_STATE_IO_AVAILABLE, &ifx_dev->flags);
 	mrdy_set_low(ifx_dev);
+	del_timer(&ifx_dev->spi_timer);
 	clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags);
 	tasklet_kill(&ifx_dev->io_work_tasklet);
 }
@@ -810,7 +811,8 @@ static void ifx_spi_io(unsigned long data)
 		ifx_dev->spi_xfer.cs_change = 0;
 		ifx_dev->spi_xfer.speed_hz = ifx_dev->spi_dev->max_speed_hz;
 		/* ifx_dev->spi_xfer.speed_hz = 390625; */
-		ifx_dev->spi_xfer.bits_per_word = spi_bpw;
+		ifx_dev->spi_xfer.bits_per_word =
+			ifx_dev->spi_dev->bits_per_word;
 
 		ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer;
 		ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer;
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 6db23b0..e55615e 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -253,7 +253,7 @@ static void mxs_auart_tx_chars(struct mxs_auart_port *s)
 	struct circ_buf *xmit = &s->port.state->xmit;
 
 	if (auart_dma_enabled(s)) {
-		int i = 0;
+		u32 i = 0;
 		int size;
 		void *buffer = s->tx_dma_buf;
 
@@ -412,10 +412,12 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl)
 
 	u32 ctrl = readl(u->membase + AUART_CTRL2);
 
-	ctrl &= ~AUART_CTRL2_RTSEN;
+	ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS);
 	if (mctrl & TIOCM_RTS) {
 		if (tty_port_cts_enabled(&u->state->port))
 			ctrl |= AUART_CTRL2_RTSEN;
+		else
+			ctrl |= AUART_CTRL2_RTS;
 	}
 
 	s->ctrl = mctrl;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 12e5249..e514b3a 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1006,7 +1006,6 @@ static void s3c24xx_serial_resetport(struct uart_port *port,
 
 	ucon &= ucon_mask;
 	wr_regl(port, S3C2410_UCON,  ucon | cfg->ucon);
-	wr_regl(port, S3C2410_ULCON, cfg->ulcon);
 
 	/* reset both fifos */
 	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 8fd1814..d5ed9f6 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -604,7 +604,7 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 	vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
 
 	vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
-	if (vt8500_port->clk) {
+	if (!IS_ERR(vt8500_port->clk)) {
 		vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
 	} else {
 		/* use the default of 24Mhz if not specified and warn */