Merge remote-tracking branch 'stable/linux-3.12.y' into sdk-v1.6.x

Signed-off-by: Scott Wood <scottwood@freescale.com>

Conflicts:
	drivers/mmc/card/block.c

5 files changed, 73 insertions, 49 deletions

diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index a6b2cab..6524383 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -651,10 +651,6 @@ void usb_destroy_configuration(struct usb_device *dev)
  *
  * hub-only!! ... and only in reset path, or usb_new_device()
  * (used by real hubs and virtual root hubs)
- *
- * NOTE: if this is a WUSB device and is not authorized, we skip the
- *       whole thing. A non-authorized USB device has no
- *       configurations.
  */
 int usb_get_configuration(struct usb_device *dev)
 {
@@ -666,8 +662,6 @@ int usb_get_configuration(struct usb_device *dev)
 	struct usb_config_descriptor *desc;
 
 	cfgno = 0;
-	if (dev->authorized == 0)	/* Not really an error */
-		goto out_not_authorized;
 	result = -ENOMEM;
 	if (ncfg > USB_MAXCONFIG) {
 		dev_warn(ddev, "too many configurations: %d, "
@@ -724,6 +718,10 @@ int usb_get_configuration(struct usb_device *dev)
 			result = -ENOMEM;
 			goto err;
 		}
+
+		if (dev->quirks & USB_QUIRK_DELAY_INIT)
+			msleep(100);
+
 		result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
 		    bigbuffer, length);
 		if (result < 0) {
@@ -751,7 +749,6 @@ int usb_get_configuration(struct usb_device *dev)
 
 err:
 	kfree(desc);
-out_not_authorized:
 	dev->descriptor.bNumConfigurations = cfgno;
 err2:
 	if (result == -ENOMEM)
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index f7841d4..689433c 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1790,6 +1790,9 @@ int usb_set_usb2_hardware_lpm(struct usb_device *udev, int enable)
 	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
 	int ret = -EPERM;
 
+	if (enable && !udev->usb2_hw_lpm_allowed)
+		return 0;
+
 	if (hcd->driver->set_usb2_hw_lpm) {
 		ret = hcd->driver->set_usb2_hw_lpm(hcd, udev, enable);
 		if (!ret)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 24297c6..19f45e1 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1130,6 +1130,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			usb_clear_port_feature(hub->hdev, port1,
 					USB_PORT_FEAT_C_ENABLE);
 		}
+		if (portchange & USB_PORT_STAT_C_RESET) {
+			need_debounce_delay = true;
+			usb_clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_RESET);
+		}
 		if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
 				hub_is_superspeed(hub->hdev)) {
 			need_debounce_delay = true;
@@ -1600,7 +1605,7 @@ static void hub_disconnect(struct usb_interface *intf)
 {
 	struct usb_hub *hub = usb_get_intfdata(intf);
 	struct usb_device *hdev = interface_to_usbdev(intf);
-	int i;
+	int port1;
 
 	/* Take the hub off the event list and don't let it be added again */
 	spin_lock_irq(&hub_event_lock);
@@ -1615,11 +1620,15 @@ static void hub_disconnect(struct usb_interface *intf)
 	hub->error = 0;
 	hub_quiesce(hub, HUB_DISCONNECT);
 
-	usb_set_intfdata (intf, NULL);
+	/* Avoid races with recursively_mark_NOTATTACHED() */
+	spin_lock_irq(&device_state_lock);
+	port1 = hdev->maxchild;
+	hdev->maxchild = 0;
+	usb_set_intfdata(intf, NULL);
+	spin_unlock_irq(&device_state_lock);
 
-	for (i = 0; i < hdev->maxchild; i++)
-		usb_hub_remove_port_device(hub, i + 1);
-	hub->hdev->maxchild = 0;
+	for (; port1 > 0; --port1)
+		usb_hub_remove_port_device(hub, port1);
 
 	if (hub->hdev->speed == USB_SPEED_HIGH)
 		highspeed_hubs--;
@@ -2228,18 +2237,13 @@ static int usb_enumerate_device(struct usb_device *udev)
 			return err;
 		}
 	}
-	if (udev->wusb == 1 && udev->authorized == 0) {
-		udev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-		udev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-		udev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-	}
-	else {
-		/* read the standard strings and cache them if present */
-		udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
-		udev->manufacturer = usb_cache_string(udev,
-						      udev->descriptor.iManufacturer);
-		udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
-	}
+
+	/* read the standard strings and cache them if present */
+	udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
+	udev->manufacturer = usb_cache_string(udev,
+					      udev->descriptor.iManufacturer);
+	udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
+
 	err = usb_enumerate_device_otg(udev);
 	if (err < 0)
 		return err;
@@ -2421,16 +2425,6 @@ int usb_deauthorize_device(struct usb_device *usb_dev)
 	usb_dev->authorized = 0;
 	usb_set_configuration(usb_dev, -1);
 
-	kfree(usb_dev->product);
-	usb_dev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-	kfree(usb_dev->manufacturer);
-	usb_dev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-	kfree(usb_dev->serial);
-	usb_dev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-
-	usb_destroy_configuration(usb_dev);
-	usb_dev->descriptor.bNumConfigurations = 0;
-
 out_unauthorized:
 	usb_unlock_device(usb_dev);
 	return 0;
@@ -2458,17 +2452,7 @@ int usb_authorize_device(struct usb_device *usb_dev)
 		goto error_device_descriptor;
 	}
 
-	kfree(usb_dev->product);
-	usb_dev->product = NULL;
-	kfree(usb_dev->manufacturer);
-	usb_dev->manufacturer = NULL;
-	kfree(usb_dev->serial);
-	usb_dev->serial = NULL;
-
 	usb_dev->authorized = 1;
-	result = usb_enumerate_device(usb_dev);
-	if (result < 0)
-		goto error_enumerate;
 	/* Choose and set the configuration.  This registers the interfaces
 	 * with the driver core and lets interface drivers bind to them.
 	 */
@@ -2484,7 +2468,6 @@ int usb_authorize_device(struct usb_device *usb_dev)
 	}
 	dev_info(&usb_dev->dev, "authorized to connect\n");
 
-error_enumerate:
 error_device_descriptor:
 	usb_autosuspend_device(usb_dev);
 error_autoresume:
@@ -3949,6 +3932,32 @@ static int hub_set_address(struct usb_device *udev, int devnum)
 	return retval;
 }
 
+/*
+ * There are reports of USB 3.0 devices that say they support USB 2.0 Link PM
+ * when they're plugged into a USB 2.0 port, but they don't work when LPM is
+ * enabled.
+ *
+ * Only enable USB 2.0 Link PM if the port is internal (hardwired), or the
+ * device says it supports the new USB 2.0 Link PM errata by setting the BESL
+ * support bit in the BOS descriptor.
+ */
+static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
+{
+	int connect_type;
+
+	if (!udev->usb2_hw_lpm_capable)
+		return;
+
+	connect_type = usb_get_hub_port_connect_type(udev->parent,
+			udev->portnum);
+
+	if ((udev->bos->ext_cap->bmAttributes & USB_BESL_SUPPORT) ||
+			connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) {
+		udev->usb2_hw_lpm_allowed = 1;
+		usb_set_usb2_hardware_lpm(udev, 1);
+	}
+}
+
 /* Reset device, (re)assign address, get device descriptor.
  * Device connection must be stable, no more debouncing needed.
  * Returns device in USB_STATE_ADDRESS, except on error.
@@ -4244,6 +4253,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	/* notify HCD that we have a device connected and addressed */
 	if (hcd->driver->update_device)
 		hcd->driver->update_device(hcd, udev);
+	hub_set_initial_usb2_lpm_policy(udev);
 fail:
 	if (retval) {
 		hub_port_disable(hub, port1, 0);
@@ -4801,8 +4811,9 @@ static void hub_events(void)
 					hub->ports[i - 1]->child;
 
 				dev_dbg(hub_dev, "warm reset port %d\n", i);
-				if (!udev || !(portstatus &
-						USB_PORT_STAT_CONNECTION)) {
+				if (!udev ||
+				    !(portstatus & USB_PORT_STAT_CONNECTION) ||
+				    udev->state == USB_STATE_NOTATTACHED) {
 					status = hub_port_reset(hub, i,
 							NULL, HUB_BH_RESET_TIME,
 							true);
@@ -5088,6 +5099,12 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 	}
 	parent_hub = usb_hub_to_struct_hub(parent_hdev);
 
+	/* Disable USB2 hardware LPM.
+	 * It will be re-enabled by the enumeration process.
+	 */
+	if (udev->usb2_hw_lpm_enabled == 1)
+		usb_set_usb2_hardware_lpm(udev, 0);
+
 	bos = udev->bos;
 	udev->bos = NULL;
 
@@ -5195,6 +5212,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 
 done:
 	/* Now that the alt settings are re-installed, enable LTM and LPM. */
+	usb_set_usb2_hardware_lpm(udev, 1);
 	usb_unlocked_enable_lpm(udev);
 	usb_enable_ltm(udev);
 	usb_release_bos_descriptor(udev);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 01fe362..1053eb6 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -46,6 +46,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Microsoft LifeCam-VX700 v2.0 */
 	{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech HD Pro Webcams C920 and C930e */
+	{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
+	{ USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT },
+
 	/* Logitech Quickcam Fusion */
 	{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
 
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 6d2c8ed..ca516ac 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -449,7 +449,7 @@ static ssize_t usb2_hardware_lpm_show(struct device *dev,
 	struct usb_device *udev = to_usb_device(dev);
 	const char *p;
 
-	if (udev->usb2_hw_lpm_enabled == 1)
+	if (udev->usb2_hw_lpm_allowed == 1)
 		p = "enabled";
 	else
 		p = "disabled";
@@ -469,8 +469,10 @@ static ssize_t usb2_hardware_lpm_store(struct device *dev,
 
 	ret = strtobool(buf, &value);
 
-	if (!ret)
+	if (!ret) {
+		udev->usb2_hw_lpm_allowed = value;
 		ret = usb_set_usb2_hardware_lpm(udev, value);
+	}
 
 	usb_unlock_device(udev);