diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/usb/serial/Kconfig | |
download | linux-fsl-qoriq-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/usb/serial/Kconfig')
-rw-r--r-- | drivers/usb/serial/Kconfig | 455 |
1 files changed, 455 insertions, 0 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig new file mode 100644 index 0000000..b869076 --- /dev/null +++ b/drivers/usb/serial/Kconfig @@ -0,0 +1,455 @@ +# +# USB Serial device configuration +# + +menu "USB Serial Converter support" + depends on USB!=n + +config USB_SERIAL + tristate "USB Serial Converter support" + depends on USB + ---help--- + Say Y here if you have a USB device that provides normal serial + ports, or acts like a serial device, and you want to connect it to + your USB bus. + + Please read <file:Documentation/usb/usb-serial.txt> for more + information on the specifics of the different devices that are + supported, and on how to use them. + + To compile this driver as a module, choose M here: the + module will be called usbserial. + +config USB_SERIAL_CONSOLE + bool "USB Serial Console device support (EXPERIMENTAL)" + depends on USB_SERIAL=y && EXPERIMENTAL + ---help--- + If you say Y here, it will be possible to use a USB to serial + converter port as the system console (the system console is the + device which receives all kernel messages and warnings and which + allows logins in single user mode). This could be useful if some + terminal or printer is connected to that serial port. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyUSB0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + + If you don't have a VGA card installed and you say Y here, the + kernel will automatically use the first USB to serial converter + port, /dev/ttyUSB0, as system console. + + If unsure, say N. + +config USB_SERIAL_GENERIC + bool "USB Generic Serial Driver" + depends on USB_SERIAL + help + Say Y here if you want to use the generic USB serial driver. Please + read <file:Documentation/usb/usb-serial.txt> for more information on + using this driver. It is recommended that the "USB Serial converter + support" be compiled as a module for this driver to be used + properly. + +config USB_SERIAL_BELKIN + tristate "USB Belkin and Peracom Single Port Serial Driver" + depends on USB_SERIAL + help + Say Y here if you want to use a Belkin USB Serial single port + adaptor (F5U103 is one of the model numbers) or the Peracom single + port USB to serial adapter. + + To compile this driver as a module, choose M here: the + module will be called belkin_sa. + +config USB_SERIAL_WHITEHEAT + tristate "USB ConnectTech WhiteHEAT Serial Driver" + depends on USB_SERIAL && BROKEN_ON_SMP + help + Say Y here if you want to use a ConnectTech WhiteHEAT 4 port + USB to serial converter device. + + To compile this driver as a module, choose M here: the + module will be called whiteheat. + +config USB_SERIAL_DIGI_ACCELEPORT + tristate "USB Digi International AccelePort USB Serial Driver" + depends on USB_SERIAL + ---help--- + Say Y here if you want to use Digi AccelePort USB 2 or 4 devices, + 2 port (plus parallel port) and 4 port USB serial converters. The + parallel port on the USB 2 appears as a third serial port on Linux. + The Digi Acceleport USB 8 is not yet supported by this driver. + + This driver works under SMP with the usb-uhci driver. It does not + work under SMP with the uhci driver. + + To compile this driver as a module, choose M here: the + module will be called digi_acceleport. + +config USB_SERIAL_CP2101 + tristate "USB CP2101 UART Bridge Controller" + depends on USB_SERIAL && EXPERIMENTAL + help + Say Y here if you want to use a CP2101/CP2102 based USB to RS232 + converter. + + To compile this driver as a module, choose M here: the + module will be called cp2101. + +config USB_SERIAL_CYPRESS_M8 + tristate "USB Cypress M8 USB Serial Driver" + depends on USB_SERIAL && EXPERIMENTAL + help + Say Y here if you want to use a device that contains the Cypress + USB to Serial microcontroller, such as the DeLorme Earthmate GPS. + + Attempted SMP support... send bug reports! + + Supported microcontrollers in the CY4601 family are: + CY7C63741 CY7C63742 CY7C63743 CY7C64013 + + To compile this driver as a module, choose M here: the + module will be called cypress_m8. + +config USB_SERIAL_EMPEG + tristate "USB Empeg empeg-car Mark I/II Driver" + depends on USB_SERIAL + help + Say Y here if you want to connect to your Empeg empeg-car Mark I/II + mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...} + device node. See <file:Documentation/usb/usb-serial.txt> for more + tidbits of information. + + To compile this driver as a module, choose M here: the + module will be called empeg. + +config USB_SERIAL_FTDI_SIO + tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)" + depends on USB_SERIAL && EXPERIMENTAL + ---help--- + Say Y here if you want to use a FTDI SIO single port USB to serial + converter device. The implementation I have is called the USC-1000. + This driver has also be tested with the 245 and 232 devices. + + See <http://ftdi-usb-sio.sourceforge.net/> for more + information on this driver and the device. + + To compile this driver as a module, choose M here: the + module will be called ftdi_sio. + +config USB_SERIAL_VISOR + tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver" + depends on USB_SERIAL + help + Say Y here if you want to connect to your HandSpring Visor, Palm + m500 or m505 through its USB docking station. See + <http://usbvisor.sourceforge.net/> for more information on using this + driver. + + To compile this driver as a module, choose M here: the + module will be called visor. + +config USB_SERIAL_IPAQ + tristate "USB PocketPC PDA Driver" + depends on USB_SERIAL + help + Say Y here if you want to connect to your Compaq iPAQ, HP Jornada + or any other PDA running Windows CE 3.0 or PocketPC 2002 + using a USB cradle/cable. For information on using the driver, + read <file:Documentation/usb/usb-serial.txt>. + + To compile this driver as a module, choose M here: the + module will be called ipaq. + +config USB_SERIAL_IR + tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)" + depends on USB_SERIAL && EXPERIMENTAL + help + Say Y here if you want to enable simple serial support for USB IrDA + devices. This is useful if you do not want to use the full IrDA + stack. + + To compile this driver as a module, choose M here: the + module will be called ir-usb. + +config USB_SERIAL_EDGEPORT + tristate "USB Inside Out Edgeport Serial Driver" + depends on USB_SERIAL + ---help--- + Say Y here if you want to use any of the following devices from + Inside Out Networks (Digi): + Edgeport/4 + Rapidport/4 + Edgeport/4t + Edgeport/2 + Edgeport/4i + Edgeport/2i + Edgeport/421 + Edgeport/21 + Edgeport/8 + Edgeport/8 Dual + Edgeport/2D8 + Edgeport/4D8 + Edgeport/8i + Edgeport/2 DIN + Edgeport/4 DIN + Edgeport/16 Dual + + To compile this driver as a module, choose M here: the + module will be called io_edgeport. + +config USB_SERIAL_EDGEPORT_TI + tristate "USB Inside Out Edgeport Serial Driver (TI devices)" + depends on USB_SERIAL + help + Say Y here if you want to use any of the devices from Inside Out + Networks (Digi) that are not supported by the io_edgeport driver. + This includes the Edgeport/1 device. + + To compile this driver as a module, choose M here: the + module will be called io_ti. + +config USB_SERIAL_GARMIN + tristate "USB Garmin GPS driver" + depends on USB_SERIAL + help + Say Y here if you want to connect to your Garmin GPS. + Should work with most Garmin GPS devices which have a native USB port. + + See <http://sourceforge.net/projects/garmin-gps> for the latest + version of the driver. + + To compile this driver as a module, choose M here: the + module will be called garmin_gps. + +config USB_SERIAL_IPW + tristate "USB IPWireless (3G UMTS TDD) Driver (EXPERIMENTAL)" + depends on USB_SERIAL && EXPERIMENTAL + help + Say Y here if you want to use a IPWireless USB modem such as + the ones supplied by Axity3G/Sentech South Africa. + + To compile this driver as a module, choose M here: the + module will be called ipw. + +config USB_SERIAL_KEYSPAN_PDA + tristate "USB Keyspan PDA Single Port Serial Driver" + depends on USB_SERIAL + help + Say Y here if you want to use a Keyspan PDA single port USB to + serial converter device. This driver makes use of firmware + developed from scratch by Brian Warner. + + To compile this driver as a module, choose M here: the + module will be called keyspan_pda. + +config USB_SERIAL_KEYSPAN + tristate "USB Keyspan USA-xxx Serial Driver" + depends on USB_SERIAL + ---help--- + Say Y here if you want to use Keyspan USB to serial converter + devices. This driver makes use of Keyspan's official firmware + and was developed with their support. You must also include + firmware to support your particular device(s). + + See <http://misc.nu/hugh/keyspan.html> for more information. + + To compile this driver as a module, choose M here: the + module will be called keyspan. + +config USB_SERIAL_KEYSPAN_MPR + bool "USB Keyspan MPR Firmware" + depends on USB_SERIAL_KEYSPAN + help + Say Y here to include firmware for the Keyspan MPR converter. + +config USB_SERIAL_KEYSPAN_USA28 + bool "USB Keyspan USA-28 Firmware" + depends on USB_SERIAL_KEYSPAN + help + Say Y here to include firmware for the USA-28 converter. + +config USB_SERIAL_KEYSPAN_USA28X + bool "USB Keyspan USA-28X Firmware" + depends on USB_SERIAL_KEYSPAN + help + Say Y here to include firmware for the USA-28X converter. + Be sure you have a USA-28X, there are also 28XA and 28XB + models, the label underneath has the actual part number. + +config USB_SERIAL_KEYSPAN_USA28XA + bool "USB Keyspan USA-28XA Firmware" + depends on USB_SERIAL_KEYSPAN + help + Say Y here to include firmware for the USA-28XA converter. + Be sure you have a USA-28XA, there are also 28X and 28XB + models, the label underneath has the actual part number. + +config USB_SERIAL_KEYSPAN_USA28XB + bool "USB Keyspan USA-28XB Firmware" + depends on USB_SERIAL_KEYSPAN + help + Say Y here to include firmware for the USA-28XB converter. + Be sure you have a USA-28XB, there are also 28X and 28XA + models, the label underneath has the actual part number. + +config USB_SERIAL_KEYSPAN_USA19 + bool "USB Keyspan USA-19 Firmware" + depends on USB_SERIAL_KEYSPAN + help + Say Y here to include firmware for the USA-19 converter. + +config USB_SERIAL_KEYSPAN_USA18X + bool "USB Keyspan USA-18X Firmware" + depends on USB_SERIAL_KEYSPAN + help + Say Y here to include firmware for the USA-18X converter. + +config USB_SERIAL_KEYSPAN_USA19W + bool "USB Keyspan USA-19W Firmware" + depends on USB_SERIAL_KEYSPAN + help + Say Y here to include firmware for the USA-19W converter. + +config USB_SERIAL_KEYSPAN_USA19QW + bool "USB Keyspan USA-19QW Firmware" + depends on USB_SERIAL_KEYSPAN + help + Say Y here to include firmware for the USA-19QW converter. + +config USB_SERIAL_KEYSPAN_USA19QI + bool "USB Keyspan USA-19QI Firmware" + depends on USB_SERIAL_KEYSPAN + help + Say Y here to include firmware for the USA-19QI converter. + +config USB_SERIAL_KEYSPAN_USA49W + bool "USB Keyspan USA-49W Firmware" + depends on USB_SERIAL_KEYSPAN + help + Say Y here to include firmware for the USA-49W converter. + +config USB_SERIAL_KEYSPAN_USA49WLC + bool "USB Keyspan USA-49WLC Firmware" + depends on USB_SERIAL_KEYSPAN + help + Say Y here to include firmware for the USA-49WLC converter. + +config USB_SERIAL_KLSI + tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)" + depends on USB_SERIAL && EXPERIMENTAL + ---help--- + Say Y here if you want to use a KL5KUSB105 - based single port + serial adapter. The most widely known -- and currently the only + tested -- device in this category is the PalmConnect USB Serial + adapter sold by Palm Inc. for use with their Palm III and Palm V + series PDAs. + + Please read <file:Documentation/usb/usb-serial.txt> for more + information. + + To compile this driver as a module, choose M here: the + module will be called kl5kusb105. + +config USB_SERIAL_KOBIL_SCT + tristate "USB KOBIL chipcard reader" + depends on USB_SERIAL + ---help--- + Say Y here if you want to use one of the following KOBIL USB chipcard + readers: + + - USB TWIN + - KAAN Standard Plus + - KAAN SIM + - SecOVID Reader Plus + - B1 Professional + - KAAN Professional + + Note that you need a current CT-API. + To compile this driver as a module, choose M here: the + module will be called kobil_sct. + +config USB_SERIAL_MCT_U232 + tristate "USB MCT Single Port Serial Driver" + depends on USB_SERIAL + ---help--- + Say Y here if you want to use a USB Serial single port adapter from + Magic Control Technology Corp. (U232 is one of the model numbers). + + This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB + BAY devices. + + To compile this driver as a module, choose M here: the + module will be called mct_u232. + +config USB_SERIAL_PL2303 + tristate "USB Prolific 2303 Single Port Serial Driver" + depends on USB_SERIAL + help + Say Y here if you want to use the PL2303 USB Serial single port + adapter from Prolific. + + To compile this driver as a module, choose M here: the + module will be called pl2303. + +config USB_SERIAL_SAFE + tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)" + depends on USB_SERIAL && EXPERIMENTAL + +config USB_SERIAL_SAFE_PADDED + bool "USB Secure Encapsulated Driver - Padded" + depends on USB_SERIAL_SAFE + +config USB_SERIAL_TI + tristate "USB TI 3410/5052 Serial Driver" + depends on USB_SERIAL + help + Say Y here if you want to use the TI USB 3410 or 5052 + serial devices. + + To compile this driver as a module, choose M here: the + module will be called ti_usb_3410_5052. + +config USB_SERIAL_CYBERJACK + tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)" + depends on USB_SERIAL && EXPERIMENTAL + ---help--- + Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard + reader. This is an interface to ISO 7816 compatible contactbased + chipcards, e.g. GSM SIMs. + + To compile this driver as a module, choose M here: the + module will be called cyberjack. + + If unsure, say N. + +config USB_SERIAL_XIRCOM + tristate "USB Xircom / Entregra Single Port Serial Driver" + depends on USB_SERIAL + help + Say Y here if you want to use a Xircom or Entregra single port USB to + serial converter device. This driver makes use of firmware + developed from scratch by Brian Warner. + + To compile this driver as a module, choose M here: the + module will be called keyspan_pda. + +config USB_SERIAL_OMNINET + tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)" + depends on USB_SERIAL && EXPERIMENTAL + help + Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA. + + To compile this driver as a module, choose M here: the + module will be called omninet. + +config USB_EZUSB + bool + depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT + default y + +endmenu + |