OMAPDSS: Replace multi part debug prints with pr_debug

The various functions in dispc and dsi such as print_irq_status(),
print_irq_status_vc(), print_irq_status_cio() and _dsi_print_reset_status()
consist of a number of debug prints which need to be enabled all at once or none
at all. So, these debug prints in corresponding functions are replaced with one
dynamic debug enabled pr_debug() each.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Reviewed-by: Sumit Semwal <sumit.semwal@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

1 files changed, 77 insertions, 91 deletions

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index b0345f3..19daee9 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -45,7 +45,6 @@
 #include "dss.h"
 #include "dss_features.h"
 
-/*#define VERBOSE_IRQ*/
 #define DSI_CATCH_MISSING_TE
 
 struct dsi_reg { u16 idx; };
@@ -526,42 +525,38 @@ static inline void dsi_perf_show(struct platform_device *dsidev,
 }
 #endif
 
+static int verbose_irq;
+
 static void print_irq_status(u32 status)
 {
 	if (status == 0)
 		return;
 
-#ifndef VERBOSE_IRQ
-	if ((status & ~DSI_IRQ_CHANNEL_MASK) == 0)
+	if (!verbose_irq && (status & ~DSI_IRQ_CHANNEL_MASK) == 0)
 		return;
-#endif
-	printk(KERN_DEBUG "DSI IRQ: 0x%x: ", status);
 
-#define PIS(x) \
-	if (status & DSI_IRQ_##x) \
-		printk(#x " ");
-#ifdef VERBOSE_IRQ
-	PIS(VC0);
-	PIS(VC1);
-	PIS(VC2);
-	PIS(VC3);
-#endif
-	PIS(WAKEUP);
-	PIS(RESYNC);
-	PIS(PLL_LOCK);
-	PIS(PLL_UNLOCK);
-	PIS(PLL_RECALL);
-	PIS(COMPLEXIO_ERR);
-	PIS(HS_TX_TIMEOUT);
-	PIS(LP_RX_TIMEOUT);
-	PIS(TE_TRIGGER);
-	PIS(ACK_TRIGGER);
-	PIS(SYNC_LOST);
-	PIS(LDO_POWER_GOOD);
-	PIS(TA_TIMEOUT);
+#define PIS(x) (status & DSI_IRQ_##x) ? (#x " ") : ""
+
+	pr_debug("DSI IRQ: 0x%x: %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
+		status,
+		verbose_irq ? PIS(VC0) : "",
+		verbose_irq ? PIS(VC1) : "",
+		verbose_irq ? PIS(VC2) : "",
+		verbose_irq ? PIS(VC3) : "",
+		PIS(WAKEUP),
+		PIS(RESYNC),
+		PIS(PLL_LOCK),
+		PIS(PLL_UNLOCK),
+		PIS(PLL_RECALL),
+		PIS(COMPLEXIO_ERR),
+		PIS(HS_TX_TIMEOUT),
+		PIS(LP_RX_TIMEOUT),
+		PIS(TE_TRIGGER),
+		PIS(ACK_TRIGGER),
+		PIS(SYNC_LOST),
+		PIS(LDO_POWER_GOOD),
+		PIS(TA_TIMEOUT));
 #undef PIS
-
-	printk("\n");
 }
 
 static void print_irq_status_vc(int channel, u32 status)
@@ -569,28 +564,24 @@ static void print_irq_status_vc(int channel, u32 status)
 	if (status == 0)
 		return;
 
-#ifndef VERBOSE_IRQ
-	if ((status & ~DSI_VC_IRQ_PACKET_SENT) == 0)
+	if (!verbose_irq && (status & ~DSI_VC_IRQ_PACKET_SENT) == 0)
 		return;
-#endif
-	printk(KERN_DEBUG "DSI VC(%d) IRQ 0x%x: ", channel, status);
 
-#define PIS(x) \
-	if (status & DSI_VC_IRQ_##x) \
-		printk(#x " ");
-	PIS(CS);
-	PIS(ECC_CORR);
-#ifdef VERBOSE_IRQ
-	PIS(PACKET_SENT);
-#endif
-	PIS(FIFO_TX_OVF);
-	PIS(FIFO_RX_OVF);
-	PIS(BTA);
-	PIS(ECC_NO_CORR);
-	PIS(FIFO_TX_UDF);
-	PIS(PP_BUSY_CHANGE);
+#define PIS(x) (status & DSI_VC_IRQ_##x) ? (#x " ") : ""
+
+	pr_debug("DSI VC(%d) IRQ 0x%x: %s%s%s%s%s%s%s%s%s\n",
+		channel,
+		status,
+		PIS(CS),
+		PIS(ECC_CORR),
+		PIS(ECC_NO_CORR),
+		verbose_irq ? PIS(PACKET_SENT) : "",
+		PIS(BTA),
+		PIS(FIFO_TX_OVF),
+		PIS(FIFO_RX_OVF),
+		PIS(FIFO_TX_UDF),
+		PIS(PP_BUSY_CHANGE));
 #undef PIS
-	printk("\n");
 }
 
 static void print_irq_status_cio(u32 status)
@@ -598,34 +589,31 @@ static void print_irq_status_cio(u32 status)
 	if (status == 0)
 		return;
 
-	printk(KERN_DEBUG "DSI CIO IRQ 0x%x: ", status);
-
-#define PIS(x) \
-	if (status & DSI_CIO_IRQ_##x) \
-		printk(#x " ");
-	PIS(ERRSYNCESC1);
-	PIS(ERRSYNCESC2);
-	PIS(ERRSYNCESC3);
-	PIS(ERRESC1);
-	PIS(ERRESC2);
-	PIS(ERRESC3);
-	PIS(ERRCONTROL1);
-	PIS(ERRCONTROL2);
-	PIS(ERRCONTROL3);
-	PIS(STATEULPS1);
-	PIS(STATEULPS2);
-	PIS(STATEULPS3);
-	PIS(ERRCONTENTIONLP0_1);
-	PIS(ERRCONTENTIONLP1_1);
-	PIS(ERRCONTENTIONLP0_2);
-	PIS(ERRCONTENTIONLP1_2);
-	PIS(ERRCONTENTIONLP0_3);
-	PIS(ERRCONTENTIONLP1_3);
-	PIS(ULPSACTIVENOT_ALL0);
-	PIS(ULPSACTIVENOT_ALL1);
+#define PIS(x) (status & DSI_CIO_IRQ_##x) ? (#x " ") : ""
+
+	pr_debug("DSI CIO IRQ 0x%x: %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
+		status,
+		PIS(ERRSYNCESC1),
+		PIS(ERRSYNCESC2),
+		PIS(ERRSYNCESC3),
+		PIS(ERRESC1),
+		PIS(ERRESC2),
+		PIS(ERRESC3),
+		PIS(ERRCONTROL1),
+		PIS(ERRCONTROL2),
+		PIS(ERRCONTROL3),
+		PIS(STATEULPS1),
+		PIS(STATEULPS2),
+		PIS(STATEULPS3),
+		PIS(ERRCONTENTIONLP0_1),
+		PIS(ERRCONTENTIONLP1_1),
+		PIS(ERRCONTENTIONLP0_2),
+		PIS(ERRCONTENTIONLP1_2),
+		PIS(ERRCONTENTIONLP0_3),
+		PIS(ERRCONTENTIONLP1_3),
+		PIS(ULPSACTIVENOT_ALL0),
+		PIS(ULPSACTIVENOT_ALL1));
 #undef PIS
-
-	printk("\n");
 }
 
 #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
@@ -1121,14 +1109,6 @@ static void _dsi_print_reset_status(struct platform_device *dsidev)
 	 * I/O. */
 	l = dsi_read_reg(dsidev, DSI_DSIPHY_CFG5);
 
-	printk(KERN_DEBUG "DSI resets: ");
-
-	l = dsi_read_reg(dsidev, DSI_PLL_STATUS);
-	printk("PLL (%d) ", FLD_GET(l, 0, 0));
-
-	l = dsi_read_reg(dsidev, DSI_COMPLEXIO_CFG1);
-	printk("CIO (%d) ", FLD_GET(l, 29, 29));
-
 	if (dss_has_feature(FEAT_DSI_REVERSE_TXCLKESC)) {
 		b0 = 28;
 		b1 = 27;
@@ -1139,14 +1119,20 @@ static void _dsi_print_reset_status(struct platform_device *dsidev)
 		b2 = 26;
 	}
 
-	l = dsi_read_reg(dsidev, DSI_DSIPHY_CFG5);
-	printk("PHY (%x%x%x, %d, %d, %d)\n",
-			FLD_GET(l, b0, b0),
-			FLD_GET(l, b1, b1),
-			FLD_GET(l, b2, b2),
-			FLD_GET(l, 29, 29),
-			FLD_GET(l, 30, 30),
-			FLD_GET(l, 31, 31));
+#define DSI_FLD_GET(fld, start, end)\
+	FLD_GET(dsi_read_reg(dsidev, DSI_##fld), start, end)
+
+	pr_debug("DSI resets: PLL (%d) CIO (%d) PHY (%x%x%x, %d, %d, %d)\n",
+		DSI_FLD_GET(PLL_STATUS, 0, 0),
+		DSI_FLD_GET(COMPLEXIO_CFG1, 29, 29),
+		DSI_FLD_GET(DSIPHY_CFG5, b0, b0),
+		DSI_FLD_GET(DSIPHY_CFG5, b1, b1),
+		DSI_FLD_GET(DSIPHY_CFG5, b2, b2),
+		DSI_FLD_GET(DSIPHY_CFG5, 29, 29),
+		DSI_FLD_GET(DSIPHY_CFG5, 30, 30),
+		DSI_FLD_GET(DSIPHY_CFG5, 31, 31));
+
+#undef DSI_FLD_GET
 }
 #else
 #define _dsi_print_reset_status(x)