staging: comedi: pcmda12: tidy up multi-line comments

Tidy up the multi-line comments at the beginning of the file to
follow the CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 47 insertions, 46 deletions

diff --git a/drivers/staging/comedi/drivers/pcmda12.c b/drivers/staging/comedi/drivers/pcmda12.c
index 8ad2479..774a63d 100644
--- a/drivers/staging/comedi/drivers/pcmda12.c
+++ b/drivers/staging/comedi/drivers/pcmda12.c
@@ -1,51 +1,52 @@
 /*
-    comedi/drivers/pcmda12.c
-    Driver for Winsystems PC-104 based PCM-D/A-12 8-channel AO board.
-
-    COMEDI - Linux Control and Measurement Device Interface
-    Copyright (C) 2006 Calin A. Culianu <calin@ajvar.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-*/
+ * pcmda12.c
+ * Driver for Winsystems PC-104 based PCM-D/A-12 8-channel AO board.
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 2006 Calin A. Culianu <calin@ajvar.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
 /*
-Driver: pcmda12
-Description: A driver for the Winsystems PCM-D/A-12
-Devices: [Winsystems] PCM-D/A-12 (pcmda12)
-Author: Calin Culianu <calin@ajvar.org>
-Updated: Fri, 13 Jan 2006 12:01:01 -0500
-Status: works
-
-A driver for the relatively straightforward-to-program PCM-D/A-12.
-This board doesn't support commands, and the only way to set its
-analog output range is to jumper the board.  As such,
-comedi_data_write() ignores the range value specified.
-
-The board uses 16 consecutive I/O addresses starting at the I/O port
-base address.  Each address corresponds to the LSB then MSB of a
-particular channel from 0-7.
-
-Note that the board is not ISA-PNP capable and thus
-needs the I/O port comedi_config parameter.
-
-Note that passing a nonzero value as the second config option will
-enable "simultaneous xfer" mode for this board, in which AO writes
-will not take effect until a subsequent read of any AO channel.  This
-is so that one can speed up programming by preloading all AO registers
-with values before simultaneously setting them to take effect with one
-read command.
-
-Configuration Options:
-  [0] - I/O port base address
-  [1] - Do Simultaneous Xfer (see description)
-*/
+ * Driver: pcmda12
+ * Description: A driver for the Winsystems PCM-D/A-12
+ * Devices: (Winsystems) PCM-D/A-12 [pcmda12]
+ * Author: Calin Culianu <calin@ajvar.org>
+ * Updated: Fri, 13 Jan 2006 12:01:01 -0500
+ * Status: works
+ *
+ * A driver for the relatively straightforward-to-program PCM-D/A-12.
+ * This board doesn't support commands, and the only way to set its
+ * analog output range is to jumper the board. As such,
+ * comedi_data_write() ignores the range value specified.
+ *
+ * The board uses 16 consecutive I/O addresses starting at the I/O port
+ * base address. Each address corresponds to the LSB then MSB of a
+ * particular channel from 0-7.
+ *
+ * Note that the board is not ISA-PNP capable and thus needs the I/O
+ * port comedi_config parameter.
+ *
+ * Note that passing a nonzero value as the second config option will
+ * enable "simultaneous xfer" mode for this board, in which AO writes
+ * will not take effect until a subsequent read of any AO channel. This
+ * is so that one can speed up programming by preloading all AO registers
+ * with values before simultaneously setting them to take effect with one
+ * read command.
+ *
+ * Configuration Options:
+ *   [0] - I/O port base address
+ *   [1] - Do Simultaneous Xfer (see description)
+ */
 
 #include "../comedidev.h"