diff options
author | Russell King <rmk@dyn-67.arm.linux.org.uk> | 2008-12-15 22:13:26 (GMT) |
---|---|---|
committer | Russell King <rmk+kernel@arm.linux.org.uk> | 2008-12-15 22:13:26 (GMT) |
commit | 7e1548a597ef7e26d5d62f8be3be6da9e101b26c (patch) | |
tree | fe6cbf4d9a3c1afdba04fb276fef0f932403727c /drivers | |
parent | 1f7f569c0ae6e619504095eabf796edd712d943d (diff) | |
parent | 2619bc327417f549f1c89d5ef9b4a4aa768f41a2 (diff) | |
download | linux-fsl-qoriq-7e1548a597ef7e26d5d62f8be3be6da9e101b26c.tar.xz |
Merge branch 'omap3-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
Diffstat (limited to 'drivers')
107 files changed, 1099 insertions, 712 deletions
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index a0a178d..1423b0c 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -174,15 +174,6 @@ static int acpi_battery_get_property(struct power_supply *psy, break; case POWER_SUPPLY_PROP_CURRENT_NOW: val->intval = battery->current_now * 1000; - /* if power units are mW, convert to mA by - dividing by current voltage (mV/1000) */ - if (!battery->power_unit) { - if (battery->voltage_now) { - val->intval /= battery->voltage_now; - val->intval *= 1000; - } else - val->intval = -1; - } break; case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 78fbec8..421b7c7 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -153,7 +153,7 @@ config SATA_PROMISE If unsure, say N. config SATA_SX4 - tristate "Promise SATA SX4 support" + tristate "Promise SATA SX4 support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for Promise Serial ATA SX4. @@ -219,8 +219,8 @@ config PATA_ACPI otherwise unsupported hardware. config PATA_ALI - tristate "ALi PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "ALi PATA support" + depends on PCI help This option enables support for the ALi ATA interfaces found on the many ALi chipsets. @@ -263,7 +263,7 @@ config PATA_ATIIXP If unsure, say N. config PATA_CMD640_PCI - tristate "CMD640 PCI PATA support (Very Experimental)" + tristate "CMD640 PCI PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the CMD640 PCI IDE @@ -291,8 +291,8 @@ config PATA_CS5520 If unsure, say N. config PATA_CS5530 - tristate "CS5530 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "CS5530 PATA support" + depends on PCI help This option enables support for the Cyrix/NatSemi/AMD CS5530 companion chip used with the MediaGX/Geode processor family. @@ -309,8 +309,8 @@ config PATA_CS5535 If unsure, say N. config PATA_CS5536 - tristate "CS5536 PATA support (Experimental)" - depends on PCI && X86 && !X86_64 && EXPERIMENTAL + tristate "CS5536 PATA support" + depends on PCI && X86 && !X86_64 help This option enables support for the AMD CS5536 companion chip used with the Geode LX processor family. @@ -363,7 +363,7 @@ config PATA_HPT37X If unsure, say N. config PATA_HPT3X2N - tristate "HPT 372N/302N PATA support (Very Experimental)" + tristate "HPT 372N/302N PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the N variant HPT PATA @@ -389,8 +389,8 @@ config PATA_HPT3X3_DMA problems with DMA on this chipset. config PATA_ISAPNP - tristate "ISA Plug and Play PATA support (Experimental)" - depends on EXPERIMENTAL && ISAPNP + tristate "ISA Plug and Play PATA support" + depends on ISAPNP help This option enables support for ISA plug & play ATA controllers such as those found on old soundcards. @@ -498,8 +498,8 @@ config PATA_NINJA32 If unsure, say N. config PATA_NS87410 - tristate "Nat Semi NS87410 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Nat Semi NS87410 PATA support" + depends on PCI help This option enables support for the National Semiconductor NS87410 PCI-IDE controller. @@ -507,8 +507,8 @@ config PATA_NS87410 If unsure, say N. config PATA_NS87415 - tristate "Nat Semi NS87415 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Nat Semi NS87415 PATA support" + depends on PCI help This option enables support for the National Semiconductor NS87415 PCI-IDE controller. @@ -544,8 +544,8 @@ config PATA_PCMCIA If unsure, say N. config PATA_PDC_OLD - tristate "Older Promise PATA controller support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Older Promise PATA controller support" + depends on PCI help This option enables support for the Promise 20246, 20262, 20263, 20265 and 20267 adapters. @@ -559,7 +559,7 @@ config PATA_QDI Support for QDI 6500 and 6580 PATA controllers on VESA local bus. config PATA_RADISYS - tristate "RADISYS 82600 PATA support (Very Experimental)" + tristate "RADISYS 82600 PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the RADISYS 82600 @@ -586,8 +586,8 @@ config PATA_RZ1000 If unsure, say N. config PATA_SC1200 - tristate "SC1200 PATA support (Very Experimental)" - depends on PCI && EXPERIMENTAL + tristate "SC1200 PATA support" + depends on PCI help This option enables support for the NatSemi/AMD SC1200 SoC companion chip used with the Geode processor family. @@ -620,8 +620,8 @@ config PATA_SIL680 If unsure, say N. config PATA_SIS - tristate "SiS PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "SiS PATA support" + depends on PCI help This option enables support for SiS PATA controllers diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index d6d97d8..c11936e 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1072,7 +1072,14 @@ static int piix_broken_suspend(void) * matching is necessary because dmi_system_id.matches is * limited to four entries. */ - if (!strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") && + if (dmi_get_system_info(DMI_SYS_VENDOR) && + dmi_get_system_info(DMI_PRODUCT_NAME) && + dmi_get_system_info(DMI_PRODUCT_VERSION) && + dmi_get_system_info(DMI_PRODUCT_SERIAL) && + dmi_get_system_info(DMI_BOARD_VENDOR) && + dmi_get_system_info(DMI_BOARD_NAME) && + dmi_get_system_info(DMI_BOARD_VERSION) && + !strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") && !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") && !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") && !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") && diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index f2b83ea..a098ba8 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -382,10 +382,10 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* PCI clocking determines the ATA timing values to use */ /* info_hpt366 is safe against re-entry so we can scribble on it */ switch((reg1 & 0x700) >> 8) { - case 5: + case 9: hpriv = &hpt366_40; break; - case 9: + case 5: hpriv = &hpt366_25; break; default: diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 4e466ea..4dd9a3b 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -44,7 +44,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_ninja32" -#define DRV_VERSION "0.1.1" +#define DRV_VERSION "0.1.3" /** @@ -130,7 +130,8 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) return rc; pci_set_master(dev); - /* Set up the register mappings */ + /* Set up the register mappings. We use the I/O mapping as only the + older chips also have MMIO on BAR 1 */ base = host->iomap[0]; if (!base) return -ENOMEM; @@ -167,8 +168,12 @@ static int ninja32_reinit_one(struct pci_dev *pdev) #endif static const struct pci_device_id ninja32[] = { + { 0x10FC, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0x8008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0xf008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0xf02C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { }, }; diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index d342366..e4be55e 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -56,7 +56,6 @@ static const struct sis_laptop sis_laptop[] = { { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ { 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */ { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ - { 0x5513, 0x1039, 0x5513 }, /* Targa Visionary 1000 */ /* end marker */ { 0, } }; diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c index 6154123..6b969f8 100644 --- a/drivers/atm/horizon.c +++ b/drivers/atm/horizon.c @@ -2705,7 +2705,7 @@ static int __devinit hrz_probe(struct pci_dev *pci_dev, const struct pci_device_ /* XXX DEV_LABEL is a guess */ if (!request_region(iobase, HRZ_IO_EXTENT, DEV_LABEL)) { - return -EINVAL; + err = -EINVAL; goto out_disable; } diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index f20bf35..dc7a8c3 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -302,7 +302,7 @@ static struct kobj_type kobj_pkt_type_wqueue = { static void pkt_sysfs_dev_new(struct pktcdvd_device *pd) { if (class_pktcdvd) { - pd->dev = device_create(class_pktcdvd, NULL, pd->pkt_dev, NULL, + pd->dev = device_create(class_pktcdvd, NULL, MKDEV(0, 0), NULL, "%s", pd->name); if (IS_ERR(pd->dev)) pd->dev = NULL; @@ -2790,7 +2790,7 @@ static int pkt_new_dev(struct pktcdvd_device *pd, dev_t dev) return 0; out_mem: - blkdev_put(bdev, FMODE_READ|FMODE_WRITE); + blkdev_put(bdev, FMODE_READ | FMODE_NDELAY); /* This is safe: open() is still holding a reference. */ module_put(THIS_MODULE); return ret; @@ -2975,7 +2975,7 @@ static int pkt_remove_dev(dev_t pkt_dev) pkt_debugfs_dev_remove(pd); pkt_sysfs_dev_remove(pd); - blkdev_put(pd->bdev, FMODE_READ|FMODE_WRITE); + blkdev_put(pd->bdev, FMODE_READ | FMODE_NDELAY); remove_proc_entry(pd->name, pkt_proc); DPRINTK(DRIVER_NAME": writer %s unmapped\n", pd->name); diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index 3b23270..a8f15e6 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -418,7 +418,7 @@ static irqreturn_t cd2401_rxerr_interrupt(int irq, void *dev_id) TTY_OVERRUN); /* If the flip buffer itself is - overflowing, we still loose + overflowing, we still lose the next incoming character. */ if (tty_buffer_request_room(tty, 1) != diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 46610b0..ab9c01e 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -974,6 +974,7 @@ at_context_queue_packet(struct context *ctx, struct fw_packet *packet) packet->ack = RCODE_SEND_ERROR; return -1; } + packet->payload_bus = payload_bus; d[2].req_count = cpu_to_le16(packet->payload_length); d[2].data_address = cpu_to_le32(payload_bus); @@ -1025,7 +1026,6 @@ static int handle_at_packet(struct context *context, struct driver_data *driver_data; struct fw_packet *packet; struct fw_ohci *ohci = context->ohci; - dma_addr_t payload_bus; int evt; if (last->transfer_status == 0) @@ -1038,9 +1038,8 @@ static int handle_at_packet(struct context *context, /* This packet was cancelled, just continue. */ return 1; - payload_bus = le32_to_cpu(last->data_address); - if (payload_bus != 0) - dma_unmap_single(ohci->card.device, payload_bus, + if (packet->payload_bus) + dma_unmap_single(ohci->card.device, packet->payload_bus, packet->payload_length, DMA_TO_DEVICE); evt = le16_to_cpu(last->transfer_status) & 0x1f; @@ -1697,6 +1696,10 @@ static int ohci_cancel_packet(struct fw_card *card, struct fw_packet *packet) if (packet->ack != 0) goto out; + if (packet->payload_bus) + dma_unmap_single(ohci->card.device, packet->payload_bus, + packet->payload_length, DMA_TO_DEVICE); + log_ar_at_event('T', packet->speed, packet->header, 0x20); driver_data->packet = NULL; packet->ack = RCODE_CANCELLED; diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c index 022ac4f..2884f87 100644 --- a/drivers/firewire/fw-transaction.c +++ b/drivers/firewire/fw-transaction.c @@ -207,6 +207,7 @@ fw_fill_request(struct fw_packet *packet, int tcode, int tlabel, packet->speed = speed; packet->generation = generation; packet->ack = 0; + packet->payload_bus = 0; } /** @@ -581,6 +582,8 @@ fw_fill_response(struct fw_packet *response, u32 *request_header, BUG(); return; } + + response->payload_bus = 0; } EXPORT_SYMBOL(fw_fill_response); diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index aed7dbb..839466f0 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -27,6 +27,7 @@ #include <linux/list.h> #include <linux/spinlock_types.h> #include <linux/timer.h> +#include <linux/types.h> #include <linux/workqueue.h> #define TCODE_IS_READ_REQUEST(tcode) (((tcode) & ~1) == 4) @@ -153,6 +154,7 @@ struct fw_packet { size_t header_length; void *payload; size_t payload_length; + dma_addr_t payload_bus; u32 timestamp; /* diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index ba89b42..553dd4b 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -847,9 +847,10 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) * and the registers being closely associated. * * According to chipset errata, on the 965GM, MSI interrupts may - * be lost or delayed + * be lost or delayed, but we use them anyways to avoid + * stuck interrupts on some machines. */ - if (!IS_I945G(dev) && !IS_I945GM(dev) && !IS_I965GM(dev)) + if (!IS_I945G(dev) && !IS_I945GM(dev)) pci_enable_msi(dev->pdev); intel_opregion_init(dev); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 0a4f39b..adc972c 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -244,6 +244,10 @@ typedef struct drm_i915_private { * List of objects currently involved in rendering from the * ringbuffer. * + * Includes buffers having the contents of their GPU caches + * flushed, not necessarily primitives. last_rendering_seqno + * represents when the rendering involved will be completed. + * * A reference is held on the buffer while on this list. */ struct list_head active_list; @@ -253,6 +257,8 @@ typedef struct drm_i915_private { * still have a write_domain which needs to be flushed before * unbinding. * + * last_rendering_seqno is 0 while an object is in this list. + * * A reference is held on the buffer while on this list. */ struct list_head flushing_list; @@ -261,6 +267,8 @@ typedef struct drm_i915_private { * LRU list of objects which are not in the ringbuffer and * are ready to unbind, but are still in the GTT. * + * last_rendering_seqno is 0 while an object is in this list. + * * A reference is not held on the buffer while on this list, * as merely being GTT-bound shouldn't prevent its being * freed, and we'll pull it off the list in the free path. @@ -371,8 +379,8 @@ struct drm_i915_gem_object { uint32_t agp_type; /** - * Flagging of which individual pages are valid in GEM_DOMAIN_CPU when - * GEM_DOMAIN_CPU is not in the object's read domain. + * If present, while GEM_DOMAIN_CPU is in the read domain this array + * flags which individual pages are valid. */ uint8_t *page_cpu_valid; }; @@ -394,9 +402,6 @@ struct drm_i915_gem_request { /** Time at which this request was emitted, in jiffies. */ unsigned long emitted_jiffies; - /** Cache domains that were flushed at the start of the request. */ - uint32_t flush_domains; - struct list_head list; }; diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index d58ddef..ad672d8 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -33,21 +33,21 @@ #define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) -static int -i915_gem_object_set_domain(struct drm_gem_object *obj, - uint32_t read_domains, - uint32_t write_domain); -static int -i915_gem_object_set_domain_range(struct drm_gem_object *obj, - uint64_t offset, - uint64_t size, - uint32_t read_domains, - uint32_t write_domain); -static int -i915_gem_set_domain(struct drm_gem_object *obj, - struct drm_file *file_priv, - uint32_t read_domains, - uint32_t write_domain); +static void +i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, + uint32_t read_domains, + uint32_t write_domain); +static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj); +static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj); +static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj); +static int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, + int write); +static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, + int write); +static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, + uint64_t offset, + uint64_t size); +static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj); static int i915_gem_object_get_page_list(struct drm_gem_object *obj); static void i915_gem_object_free_page_list(struct drm_gem_object *obj); static int i915_gem_object_wait_rendering(struct drm_gem_object *obj); @@ -162,8 +162,8 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data, mutex_lock(&dev->struct_mutex); - ret = i915_gem_object_set_domain_range(obj, args->offset, args->size, - I915_GEM_DOMAIN_CPU, 0); + ret = i915_gem_object_set_cpu_read_domain_range(obj, args->offset, + args->size); if (ret != 0) { drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); @@ -260,8 +260,7 @@ i915_gem_gtt_pwrite(struct drm_device *dev, struct drm_gem_object *obj, mutex_unlock(&dev->struct_mutex); return ret; } - ret = i915_gem_set_domain(obj, file_priv, - I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT); + ret = i915_gem_object_set_to_gtt_domain(obj, 1); if (ret) goto fail; @@ -320,8 +319,7 @@ i915_gem_shmem_pwrite(struct drm_device *dev, struct drm_gem_object *obj, mutex_lock(&dev->struct_mutex); - ret = i915_gem_set_domain(obj, file_priv, - I915_GEM_DOMAIN_CPU, I915_GEM_DOMAIN_CPU); + ret = i915_gem_object_set_to_cpu_domain(obj, 1); if (ret) { mutex_unlock(&dev->struct_mutex); return ret; @@ -397,7 +395,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, } /** - * Called when user space prepares to use an object + * Called when user space prepares to use an object with the CPU, either + * through the mmap ioctl's mapping or a GTT mapping. */ int i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, @@ -405,11 +404,26 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, { struct drm_i915_gem_set_domain *args = data; struct drm_gem_object *obj; + uint32_t read_domains = args->read_domains; + uint32_t write_domain = args->write_domain; int ret; if (!(dev->driver->driver_features & DRIVER_GEM)) return -ENODEV; + /* Only handle setting domains to types used by the CPU. */ + if (write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) + return -EINVAL; + + if (read_domains & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) + return -EINVAL; + + /* Having something in the write domain implies it's in the read + * domain, and only that read domain. Enforce that in the request. + */ + if (write_domain != 0 && read_domains != write_domain) + return -EINVAL; + obj = drm_gem_object_lookup(dev, file_priv, args->handle); if (obj == NULL) return -EBADF; @@ -417,10 +431,21 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, mutex_lock(&dev->struct_mutex); #if WATCH_BUF DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n", - obj, obj->size, args->read_domains, args->write_domain); + obj, obj->size, read_domains, write_domain); #endif - ret = i915_gem_set_domain(obj, file_priv, - args->read_domains, args->write_domain); + if (read_domains & I915_GEM_DOMAIN_GTT) { + ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0); + + /* Silently promote "you're not bound, there was nothing to do" + * to success, since the client was just asking us to + * make sure everything was done. + */ + if (ret == -EINVAL) + ret = 0; + } else { + ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0); + } + drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return ret; @@ -455,10 +480,9 @@ i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, obj_priv = obj->driver_private; /* Pinned buffers may be scanout, so flush the cache */ - if ((obj->write_domain & I915_GEM_DOMAIN_CPU) && obj_priv->pin_count) { - i915_gem_clflush_object(obj); - drm_agp_chipset_flush(dev); - } + if (obj_priv->pin_count) + i915_gem_object_flush_cpu_write_domain(obj); + drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return ret; @@ -532,7 +556,7 @@ i915_gem_object_free_page_list(struct drm_gem_object *obj) } static void -i915_gem_object_move_to_active(struct drm_gem_object *obj) +i915_gem_object_move_to_active(struct drm_gem_object *obj, uint32_t seqno) { struct drm_device *dev = obj->dev; drm_i915_private_t *dev_priv = dev->dev_private; @@ -546,8 +570,20 @@ i915_gem_object_move_to_active(struct drm_gem_object *obj) /* Move from whatever list we were on to the tail of execution. */ list_move_tail(&obj_priv->list, &dev_priv->mm.active_list); + obj_priv->last_rendering_seqno = seqno; } +static void +i915_gem_object_move_to_flushing(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + BUG_ON(!obj_priv->active); + list_move_tail(&obj_priv->list, &dev_priv->mm.flushing_list); + obj_priv->last_rendering_seqno = 0; +} static void i915_gem_object_move_to_inactive(struct drm_gem_object *obj) @@ -562,6 +598,7 @@ i915_gem_object_move_to_inactive(struct drm_gem_object *obj) else list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list); + obj_priv->last_rendering_seqno = 0; if (obj_priv->active) { obj_priv->active = 0; drm_gem_object_unreference(obj); @@ -610,10 +647,28 @@ i915_add_request(struct drm_device *dev, uint32_t flush_domains) request->seqno = seqno; request->emitted_jiffies = jiffies; - request->flush_domains = flush_domains; was_empty = list_empty(&dev_priv->mm.request_list); list_add_tail(&request->list, &dev_priv->mm.request_list); + /* Associate any objects on the flushing list matching the write + * domain we're flushing with our flush. + */ + if (flush_domains != 0) { + struct drm_i915_gem_object *obj_priv, *next; + + list_for_each_entry_safe(obj_priv, next, + &dev_priv->mm.flushing_list, list) { + struct drm_gem_object *obj = obj_priv->obj; + + if ((obj->write_domain & flush_domains) == + obj->write_domain) { + obj->write_domain = 0; + i915_gem_object_move_to_active(obj, seqno); + } + } + + } + if (was_empty && !dev_priv->mm.suspended) schedule_delayed_work(&dev_priv->mm.retire_work, HZ); return seqno; @@ -676,30 +731,10 @@ i915_gem_retire_request(struct drm_device *dev, __func__, request->seqno, obj); #endif - if (obj->write_domain != 0) { - list_move_tail(&obj_priv->list, - &dev_priv->mm.flushing_list); - } else { + if (obj->write_domain != 0) + i915_gem_object_move_to_flushing(obj); + else i915_gem_object_move_to_inactive(obj); - } - } - - if (request->flush_domains != 0) { - struct drm_i915_gem_object *obj_priv, *next; - - /* Clear the write domain and activity from any buffers - * that are just waiting for a flush matching the one retired. - */ - list_for_each_entry_safe(obj_priv, next, - &dev_priv->mm.flushing_list, list) { - struct drm_gem_object *obj = obj_priv->obj; - - if (obj->write_domain & request->flush_domains) { - obj->write_domain = 0; - i915_gem_object_move_to_inactive(obj); - } - } - } } @@ -892,25 +927,10 @@ i915_gem_object_wait_rendering(struct drm_gem_object *obj) struct drm_i915_gem_object *obj_priv = obj->driver_private; int ret; - /* If there are writes queued to the buffer, flush and - * create a new seqno to wait for. + /* This function only exists to support waiting for existing rendering, + * not for emitting required flushes. */ - if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) { - uint32_t write_domain = obj->write_domain; -#if WATCH_BUF - DRM_INFO("%s: flushing object %p from write domain %08x\n", - __func__, obj, write_domain); -#endif - i915_gem_flush(dev, 0, write_domain); - - i915_gem_object_move_to_active(obj); - obj_priv->last_rendering_seqno = i915_add_request(dev, - write_domain); - BUG_ON(obj_priv->last_rendering_seqno == 0); -#if WATCH_LRU - DRM_INFO("%s: flush moves to exec list %p\n", __func__, obj); -#endif - } + BUG_ON((obj->write_domain & I915_GEM_GPU_DOMAINS) != 0); /* If there is rendering queued on the buffer being evicted, wait for * it. @@ -950,24 +970,16 @@ i915_gem_object_unbind(struct drm_gem_object *obj) return -EINVAL; } - /* Wait for any rendering to complete - */ - ret = i915_gem_object_wait_rendering(obj); - if (ret) { - DRM_ERROR("wait_rendering failed: %d\n", ret); - return ret; - } - /* Move the object to the CPU domain to ensure that * any possible CPU writes while it's not in the GTT * are flushed when we go to remap it. This will * also ensure that all pending GPU writes are finished * before we unbind. */ - ret = i915_gem_object_set_domain(obj, I915_GEM_DOMAIN_CPU, - I915_GEM_DOMAIN_CPU); + ret = i915_gem_object_set_to_cpu_domain(obj, 1); if (ret) { - DRM_ERROR("set_domain failed: %d\n", ret); + if (ret != -ERESTARTSYS) + DRM_ERROR("set_domain failed: %d\n", ret); return ret; } @@ -1083,6 +1095,21 @@ i915_gem_evict_something(struct drm_device *dev) } static int +i915_gem_evict_everything(struct drm_device *dev) +{ + int ret; + + for (;;) { + ret = i915_gem_evict_something(dev); + if (ret != 0) + break; + } + if (ret == -ENOMEM) + return 0; + return ret; +} + +static int i915_gem_object_get_page_list(struct drm_gem_object *obj) { struct drm_i915_gem_object *obj_priv = obj->driver_private; @@ -1168,7 +1195,8 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) ret = i915_gem_evict_something(dev); if (ret != 0) { - DRM_ERROR("Failed to evict a buffer %d\n", ret); + if (ret != -ERESTARTSYS) + DRM_ERROR("Failed to evict a buffer %d\n", ret); return ret; } goto search_free; @@ -1228,6 +1256,143 @@ i915_gem_clflush_object(struct drm_gem_object *obj) drm_clflush_pages(obj_priv->page_list, obj->size / PAGE_SIZE); } +/** Flushes any GPU write domain for the object if it's dirty. */ +static void +i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + uint32_t seqno; + + if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0) + return; + + /* Queue the GPU write cache flushing we need. */ + i915_gem_flush(dev, 0, obj->write_domain); + seqno = i915_add_request(dev, obj->write_domain); + obj->write_domain = 0; + i915_gem_object_move_to_active(obj, seqno); +} + +/** Flushes the GTT write domain for the object if it's dirty. */ +static void +i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj) +{ + if (obj->write_domain != I915_GEM_DOMAIN_GTT) + return; + + /* No actual flushing is required for the GTT write domain. Writes + * to it immediately go to main memory as far as we know, so there's + * no chipset flush. It also doesn't land in render cache. + */ + obj->write_domain = 0; +} + +/** Flushes the CPU write domain for the object if it's dirty. */ +static void +i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + + if (obj->write_domain != I915_GEM_DOMAIN_CPU) + return; + + i915_gem_clflush_object(obj); + drm_agp_chipset_flush(dev); + obj->write_domain = 0; +} + +/** + * Moves a single object to the GTT read, and possibly write domain. + * + * This function returns when the move is complete, including waiting on + * flushes to occur. + */ +static int +i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int ret; + + /* Not valid to be called on unbound objects. */ + if (obj_priv->gtt_space == NULL) + return -EINVAL; + + i915_gem_object_flush_gpu_write_domain(obj); + /* Wait on any GPU rendering and flushing to occur. */ + ret = i915_gem_object_wait_rendering(obj); + if (ret != 0) + return ret; + + /* If we're writing through the GTT domain, then CPU and GPU caches + * will need to be invalidated at next use. + */ + if (write) + obj->read_domains &= I915_GEM_DOMAIN_GTT; + + i915_gem_object_flush_cpu_write_domain(obj); + + /* It should now be out of any other write domains, and we can update + * the domain values for our changes. + */ + BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0); + obj->read_domains |= I915_GEM_DOMAIN_GTT; + if (write) { + obj->write_domain = I915_GEM_DOMAIN_GTT; + obj_priv->dirty = 1; + } + + return 0; +} + +/** + * Moves a single object to the CPU read, and possibly write domain. + * + * This function returns when the move is complete, including waiting on + * flushes to occur. + */ +static int +i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write) +{ + struct drm_device *dev = obj->dev; + int ret; + + i915_gem_object_flush_gpu_write_domain(obj); + /* Wait on any GPU rendering and flushing to occur. */ + ret = i915_gem_object_wait_rendering(obj); + if (ret != 0) + return ret; + + i915_gem_object_flush_gtt_write_domain(obj); + + /* If we have a partially-valid cache of the object in the CPU, + * finish invalidating it and free the per-page flags. + */ + i915_gem_object_set_to_full_cpu_read_domain(obj); + + /* Flush the CPU cache if it's still invalid. */ + if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) { + i915_gem_clflush_object(obj); + drm_agp_chipset_flush(dev); + + obj->read_domains |= I915_GEM_DOMAIN_CPU; + } + + /* It should now be out of any other write domains, and we can update + * the domain values for our changes. + */ + BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0); + + /* If we're writing through the CPU, then the GPU read domains will + * need to be invalidated at next use. + */ + if (write) { + obj->read_domains &= I915_GEM_DOMAIN_CPU; + obj->write_domain = I915_GEM_DOMAIN_CPU; + } + + return 0; +} + /* * Set the next domain for the specified object. This * may not actually perform the necessary flushing/invaliding though, @@ -1339,16 +1504,18 @@ i915_gem_clflush_object(struct drm_gem_object *obj) * MI_FLUSH * drm_agp_chipset_flush */ -static int -i915_gem_object_set_domain(struct drm_gem_object *obj, - uint32_t read_domains, - uint32_t write_domain) +static void +i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, + uint32_t read_domains, + uint32_t write_domain) { struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; uint32_t invalidate_domains = 0; uint32_t flush_domains = 0; - int ret; + + BUG_ON(read_domains & I915_GEM_DOMAIN_CPU); + BUG_ON(write_domain == I915_GEM_DOMAIN_CPU); #if WATCH_BUF DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n", @@ -1385,34 +1552,11 @@ i915_gem_object_set_domain(struct drm_gem_object *obj, DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n", __func__, flush_domains, invalidate_domains); #endif - /* - * If we're invaliding the CPU cache and flushing a GPU cache, - * then pause for rendering so that the GPU caches will be - * flushed before the cpu cache is invalidated - */ - if ((invalidate_domains & I915_GEM_DOMAIN_CPU) && - (flush_domains & ~(I915_GEM_DOMAIN_CPU | - I915_GEM_DOMAIN_GTT))) { - ret = i915_gem_object_wait_rendering(obj); - if (ret) - return ret; - } i915_gem_clflush_object(obj); } if ((write_domain | flush_domains) != 0) obj->write_domain = write_domain; - - /* If we're invalidating the CPU domain, clear the per-page CPU - * domain list as well. - */ - if (obj_priv->page_cpu_valid != NULL && - (write_domain != 0 || - read_domains & I915_GEM_DOMAIN_CPU)) { - drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE, - DRM_MEM_DRIVER); - obj_priv->page_cpu_valid = NULL; - } obj->read_domains = read_domains; dev->invalidate_domains |= invalidate_domains; @@ -1423,47 +1567,94 @@ i915_gem_object_set_domain(struct drm_gem_object *obj, obj->read_domains, obj->write_domain, dev->invalidate_domains, dev->flush_domains); #endif - return 0; } /** - * Set the read/write domain on a range of the object. + * Moves the object from a partially CPU read to a full one. * - * Currently only implemented for CPU reads, otherwise drops to normal - * i915_gem_object_set_domain(). + * Note that this only resolves i915_gem_object_set_cpu_read_domain_range(), + * and doesn't handle transitioning from !(read_domains & I915_GEM_DOMAIN_CPU). */ -static int -i915_gem_object_set_domain_range(struct drm_gem_object *obj, - uint64_t offset, - uint64_t size, - uint32_t read_domains, - uint32_t write_domain) +static void +i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj) { + struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; - int ret, i; - if (obj->read_domains & I915_GEM_DOMAIN_CPU) - return 0; + if (!obj_priv->page_cpu_valid) + return; - if (read_domains != I915_GEM_DOMAIN_CPU || - write_domain != 0) - return i915_gem_object_set_domain(obj, - read_domains, write_domain); + /* If we're partially in the CPU read domain, finish moving it in. + */ + if (obj->read_domains & I915_GEM_DOMAIN_CPU) { + int i; - /* Wait on any GPU rendering to the object to be flushed. */ + for (i = 0; i <= (obj->size - 1) / PAGE_SIZE; i++) { + if (obj_priv->page_cpu_valid[i]) + continue; + drm_clflush_pages(obj_priv->page_list + i, 1); + } + drm_agp_chipset_flush(dev); + } + + /* Free the page_cpu_valid mappings which are now stale, whether + * or not we've got I915_GEM_DOMAIN_CPU. + */ + drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE, + DRM_MEM_DRIVER); + obj_priv->page_cpu_valid = NULL; +} + +/** + * Set the CPU read domain on a range of the object. + * + * The object ends up with I915_GEM_DOMAIN_CPU in its read flags although it's + * not entirely valid. The page_cpu_valid member of the object flags which + * pages have been flushed, and will be respected by + * i915_gem_object_set_to_cpu_domain() if it's called on to get a valid mapping + * of the whole object. + * + * This function returns when the move is complete, including waiting on + * flushes to occur. + */ +static int +i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, + uint64_t offset, uint64_t size) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int i, ret; + + if (offset == 0 && size == obj->size) + return i915_gem_object_set_to_cpu_domain(obj, 0); + + i915_gem_object_flush_gpu_write_domain(obj); + /* Wait on any GPU rendering and flushing to occur. */ ret = i915_gem_object_wait_rendering(obj); - if (ret) + if (ret != 0) return ret; + i915_gem_object_flush_gtt_write_domain(obj); + /* If we're already fully in the CPU read domain, we're done. */ + if (obj_priv->page_cpu_valid == NULL && + (obj->read_domains & I915_GEM_DOMAIN_CPU) != 0) + return 0; + + /* Otherwise, create/clear the per-page CPU read domain flag if we're + * newly adding I915_GEM_DOMAIN_CPU + */ if (obj_priv->page_cpu_valid == NULL) { obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE, DRM_MEM_DRIVER); - } + if (obj_priv->page_cpu_valid == NULL) + return -ENOMEM; + } else if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) + memset(obj_priv->page_cpu_valid, 0, obj->size / PAGE_SIZE); /* Flush the cache on any pages that are still invalid from the CPU's * perspective. */ - for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; i++) { + for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; + i++) { if (obj_priv->page_cpu_valid[i]) continue; @@ -1472,39 +1663,14 @@ i915_gem_object_set_domain_range(struct drm_gem_object *obj, obj_priv->page_cpu_valid[i] = 1; } - return 0; -} - -/** - * Once all of the objects have been set in the proper domain, - * perform the necessary flush and invalidate operations. - * - * Returns the write domains flushed, for use in flush tracking. - */ -static uint32_t -i915_gem_dev_set_domain(struct drm_device *dev) -{ - uint32_t flush_domains = dev->flush_domains; - - /* - * Now that all the buffers are synced to the proper domains, - * flush and invalidate the collected domains + /* It should now be out of any other write domains, and we can update + * the domain values for our changes. */ - if (dev->invalidate_domains | dev->flush_domains) { -#if WATCH_EXEC - DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n", - __func__, - dev->invalidate_domains, - dev->flush_domains); -#endif - i915_gem_flush(dev, - dev->invalidate_domains, - dev->flush_domains); - dev->invalidate_domains = 0; - dev->flush_domains = 0; - } + BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0); - return flush_domains; + obj->read_domains |= I915_GEM_DOMAIN_CPU; + + return 0; } /** @@ -1585,6 +1751,18 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, return -EINVAL; } + if (reloc.write_domain & I915_GEM_DOMAIN_CPU || + reloc.read_domains & I915_GEM_DOMAIN_CPU) { + DRM_ERROR("reloc with read/write CPU domains: " + "obj %p target %d offset %d " + "read %08x write %08x", + obj, reloc.target_handle, + (int) reloc.offset, + reloc.read_domains, + reloc.write_domain); + return -EINVAL; + } + if (reloc.write_domain && target_obj->pending_write_domain && reloc.write_domain != target_obj->pending_write_domain) { DRM_ERROR("Write domain conflict: " @@ -1625,19 +1803,11 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, continue; } - /* Now that we're going to actually write some data in, - * make sure that any rendering using this buffer's contents - * is completed. - */ - i915_gem_object_wait_rendering(obj); - - /* As we're writing through the gtt, flush - * any CPU writes before we write the relocations - */ - if (obj->write_domain & I915_GEM_DOMAIN_CPU) { - i915_gem_clflush_object(obj); - drm_agp_chipset_flush(dev); - obj->write_domain = 0; + ret = i915_gem_object_set_to_gtt_domain(obj, 1); + if (ret != 0) { + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); + return -EINVAL; } /* Map the page containing the relocation we're going to @@ -1779,6 +1949,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, int ret, i, pinned = 0; uint64_t exec_offset; uint32_t seqno, flush_domains; + int pin_tries; #if WATCH_EXEC DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n", @@ -1827,14 +1998,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, return -EBUSY; } - /* Zero the gloabl flush/invalidate flags. These - * will be modified as each object is bound to the - * gtt - */ - dev->invalidate_domains = 0; - dev->flush_domains = 0; - - /* Look up object handles and perform the relocations */ + /* Look up object handles */ for (i = 0; i < args->buffer_count; i++) { object_list[i] = drm_gem_object_lookup(dev, file_priv, exec_list[i].handle); @@ -1844,17 +2008,39 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, ret = -EBADF; goto err; } + } - object_list[i]->pending_read_domains = 0; - object_list[i]->pending_write_domain = 0; - ret = i915_gem_object_pin_and_relocate(object_list[i], - file_priv, - &exec_list[i]); - if (ret) { - DRM_ERROR("object bind and relocate failed %d\n", ret); + /* Pin and relocate */ + for (pin_tries = 0; ; pin_tries++) { + ret = 0; + for (i = 0; i < args->buffer_count; i++) { + object_list[i]->pending_read_domains = 0; + object_list[i]->pending_write_domain = 0; + ret = i915_gem_object_pin_and_relocate(object_list[i], + file_priv, + &exec_list[i]); + if (ret) + break; + pinned = i + 1; + } + /* success */ + if (ret == 0) + break; + + /* error other than GTT full, or we've already tried again */ + if (ret != -ENOMEM || pin_tries >= 1) { + DRM_ERROR("Failed to pin buffers %d\n", ret); goto err; } - pinned = i + 1; + + /* unpin all of our buffers */ + for (i = 0; i < pinned; i++) + i915_gem_object_unpin(object_list[i]); + + /* evict everyone we can from the aperture */ + ret = i915_gem_evict_everything(dev); + if (ret) + goto err; } /* Set the pending read domains for the batch buffer to COMMAND */ @@ -1864,21 +2050,37 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, i915_verify_inactive(dev, __FILE__, __LINE__); + /* Zero the global flush/invalidate flags. These + * will be modified as new domains are computed + * for each object + */ + dev->invalidate_domains = 0; + dev->flush_domains = 0; + for (i = 0; i < args->buffer_count; i++) { struct drm_gem_object *obj = object_list[i]; - /* make sure all previous memory operations have passed */ - ret = i915_gem_object_set_domain(obj, - obj->pending_read_domains, - obj->pending_write_domain); - if (ret) - goto err; + /* Compute new gpu domains and update invalidate/flush */ + i915_gem_object_set_to_gpu_domain(obj, + obj->pending_read_domains, + obj->pending_write_domain); } i915_verify_inactive(dev, __FILE__, __LINE__); - /* Flush/invalidate caches and chipset buffer */ - flush_domains = i915_gem_dev_set_domain(dev); + if (dev->invalidate_domains | dev->flush_domains) { +#if WATCH_EXEC + DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n", + __func__, + dev->invalidate_domains, + dev->flush_domains); +#endif + i915_gem_flush(dev, + dev->invalidate_domains, + dev->flush_domains); + if (dev->flush_domains) + (void)i915_add_request(dev, dev->flush_domains); + } i915_verify_inactive(dev, __FILE__, __LINE__); @@ -1898,8 +2100,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, ~0); #endif - (void)i915_add_request(dev, flush_domains); - /* Exec the batchbuffer */ ret = i915_dispatch_gem_execbuffer(dev, args, exec_offset); if (ret) { @@ -1927,10 +2127,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, i915_file_priv->mm.last_gem_seqno = seqno; for (i = 0; i < args->buffer_count; i++) { struct drm_gem_object *obj = object_list[i]; - struct drm_i915_gem_object *obj_priv = obj->driver_private; - i915_gem_object_move_to_active(obj); - obj_priv->last_rendering_seqno = seqno; + i915_gem_object_move_to_active(obj, seqno); #if WATCH_LRU DRM_INFO("%s: move to exec list %p\n", __func__, obj); #endif @@ -2061,11 +2259,7 @@ i915_gem_pin_ioctl(struct drm_device *dev, void *data, /* XXX - flush the CPU caches for pinned objects * as the X server doesn't manage domains yet */ - if (obj->write_domain & I915_GEM_DOMAIN_CPU) { - i915_gem_clflush_object(obj); - drm_agp_chipset_flush(dev); - obj->write_domain = 0; - } + i915_gem_object_flush_cpu_write_domain(obj); args->offset = obj_priv->gtt_offset; drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); @@ -2167,29 +2361,6 @@ void i915_gem_free_object(struct drm_gem_object *obj) drm_free(obj->driver_private, 1, DRM_MEM_DRIVER); } -static int -i915_gem_set_domain(struct drm_gem_object *obj, - struct drm_file *file_priv, - uint32_t read_domains, - uint32_t write_domain) -{ - struct drm_device *dev = obj->dev; - int ret; - uint32_t flush_domains; - - BUG_ON(!mutex_is_locked(&dev->struct_mutex)); - - ret = i915_gem_object_set_domain(obj, read_domains, write_domain); - if (ret) - return ret; - flush_domains = i915_gem_dev_set_domain(obj->dev); - - if (flush_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) - (void) i915_add_request(dev, flush_domains); - - return 0; -} - /** Unbinds all objects that are on the given buffer list. */ static int i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head) diff --git a/drivers/gpu/drm/i915/i915_gem_proc.c b/drivers/gpu/drm/i915/i915_gem_proc.c index 93de15b..e8d5abe 100644 --- a/drivers/gpu/drm/i915/i915_gem_proc.c +++ b/drivers/gpu/drm/i915/i915_gem_proc.c @@ -166,10 +166,9 @@ static int i915_gem_request_info(char *buf, char **start, off_t offset, list_for_each_entry(gem_request, &dev_priv->mm.request_list, list) { - DRM_PROC_PRINT(" %d @ %d %08x\n", + DRM_PROC_PRINT(" %d @ %d\n", gem_request->seqno, - (int) (jiffies - gem_request->emitted_jiffies), - gem_request->flush_domains); + (int) (jiffies - gem_request->emitted_jiffies)); } if (len > request + offset) return request; diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index e8b85ac..a8cb694 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -119,9 +119,10 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) dcc & DCC_CHANNEL_XOR_DISABLE) { swizzle_x = I915_BIT_6_SWIZZLE_9_10; swizzle_y = I915_BIT_6_SWIZZLE_9; - } else if (IS_I965GM(dev) || IS_GM45(dev)) { - /* GM965 only does bit 11-based channel - * randomization + } else if ((IS_I965GM(dev) || IS_GM45(dev)) && + (dcc & DCC_CHANNEL_XOR_BIT_17) == 0) { + /* GM965/GM45 does either bit 11 or bit 17 + * swizzling. */ swizzle_x = I915_BIT_6_SWIZZLE_9_10_11; swizzle_y = I915_BIT_6_SWIZZLE_9_11; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 0e476eb..9d24aae 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -522,6 +522,7 @@ #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED (2 << 0) #define DCC_ADDRESSING_MODE_MASK (3 << 0) #define DCC_CHANNEL_XOR_DISABLE (1 << 10) +#define DCC_CHANNEL_XOR_BIT_17 (1 << 9) /** 965 MCH register controlling DRAM channel configuration */ #define C0DRB3 0x10206 diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 7a18378..3bbb871 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -299,7 +299,6 @@ typedef struct drm_radeon_private { atomic_t swi_emitted; int vblank_crtc; uint32_t irq_enable_reg; - int irq_enabled; uint32_t r500_disp_irq_reg; struct radeon_surface surfaces[RADEON_MAX_SURFACES]; diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c index 97c0599..99be114 100644 --- a/drivers/gpu/drm/radeon/radeon_irq.c +++ b/drivers/gpu/drm/radeon/radeon_irq.c @@ -44,7 +44,8 @@ void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state) else dev_priv->irq_enable_reg &= ~mask; - RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg); + if (!dev->irq_enabled) + RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg); } static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state) @@ -56,7 +57,8 @@ static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state) else dev_priv->r500_disp_irq_reg &= ~mask; - RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg); + if (!dev->irq_enabled) + RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg); } int radeon_enable_vblank(struct drm_device *dev, int crtc) @@ -355,8 +357,6 @@ void radeon_driver_irq_uninstall(struct drm_device * dev) if (!dev_priv) return; - dev_priv->irq_enabled = 0; - if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690) RADEON_WRITE(R500_DxMODE_INT_MASK, 0); /* Disable *all* interrupts */ diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 5763040..1a00bb7 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -669,10 +669,12 @@ config BLK_DEV_CELLEB endif +# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF config BLK_DEV_IDE_PMAC tristate "PowerMac on-board IDE support" depends on PPC_PMAC && IDE=y select IDE_TIMINGS + select BLK_DEV_IDEDMA_PCI help This driver provides support for the on-board IDE controller on most of the recent Apple Power Macintoshes and PowerBooks. @@ -689,16 +691,6 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST CD-ROM on hda. This option changes this to more natural hda for hard disk and hdc for CD-ROM. -config BLK_DEV_IDEDMA_PMAC - bool "PowerMac IDE DMA support" - depends on BLK_DEV_IDE_PMAC - select BLK_DEV_IDEDMA_PCI - help - This option allows the driver for the on-board IDE controller on - Power Macintoshes and PowerBooks to use DMA (direct memory access) - to transfer data to and from memory. Saying Y is safe and improves - performance. - config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" depends on SOC_AU1200 @@ -912,7 +904,7 @@ config BLK_DEV_UMC8672 endif config BLK_DEV_IDEDMA - def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \ + def_bool BLK_DEV_IDEDMA_SFF || \ BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA endif # IDE diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index e56c7b7..45d2356 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c @@ -591,7 +591,7 @@ static int __init ali15x3_ide_init(void) static void __exit ali15x3_ide_exit(void) { - return pci_unregister_driver(&alim15x3_pci_driver); + pci_unregister_driver(&alim15x3_pci_driver); } module_init(ali15x3_ide_init); diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c index 81ec731..c6bcd30 100644 --- a/drivers/ide/amd74xx.c +++ b/drivers/ide/amd74xx.c @@ -3,7 +3,7 @@ * IDE driver for Linux. * * Copyright (c) 2000-2002 Vojtech Pavlik - * Copyright (c) 2007 Bartlomiej Zolnierkiewicz + * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz * * Based on the work of: * Andre Hedrick @@ -263,6 +263,15 @@ static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_ d.udma_mask = ATA_UDMA5; } + /* + * It seems that on some nVidia controllers using AltStatus + * register can be unreliable so default to Status register + * if the device is in Compatibility Mode. + */ + if (dev->vendor == PCI_VENDOR_ID_NVIDIA && + ide_pci_is_in_compatibility_mode(dev)) + d.host_flags |= IDE_HFLAG_BROKEN_ALTSTATUS; + printk(KERN_INFO "%s %s: UDMA%s controller\n", d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 7162d67..cc35d6d 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -132,10 +132,14 @@ int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors) } EXPORT_SYMBOL(ide_end_request); -static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error) +static void ide_complete_power_step(ide_drive_t *drive, struct request *rq) { struct request_pm_state *pm = rq->data; +#ifdef DEBUG_PM + printk(KERN_INFO "%s: complete_power_step(step: %d)\n", + drive->name, pm->pm_step); +#endif if (drive->media != ide_disk) return; @@ -172,7 +176,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * /* Not supported? Switch to next step now. */ if (ata_id_flush_enabled(drive->id) == 0 || (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) { - ide_complete_power_step(drive, rq, 0, 0); + ide_complete_power_step(drive, rq); return ide_stopped; } if (ata_id_flush_ext_enabled(drive->id)) @@ -191,7 +195,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * if (drive->media != ide_disk) pm->pm_step = IDE_PM_RESTORE_DMA; else - ide_complete_power_step(drive, rq, 0, 0); + ide_complete_power_step(drive, rq); return ide_stopped; case IDE_PM_IDLE: /* Resume step 2 (idle) */ args->tf.command = ATA_CMD_IDLEIMMEDIATE; @@ -322,11 +326,8 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) } } else if (blk_pm_request(rq)) { struct request_pm_state *pm = rq->data; -#ifdef DEBUG_PM - printk("%s: complete_power_step(step: %d, stat: %x, err: %x)\n", - drive->name, rq->pm->pm_step, stat, err); -#endif - ide_complete_power_step(drive, rq, stat, err); + + ide_complete_power_step(drive, rq); if (pm->pm_step == IDE_PM_COMPLETED) ide_complete_pm_request(drive, rq); return; @@ -804,7 +805,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) struct request_pm_state *pm = rq->data; #ifdef DEBUG_PM printk("%s: start_power_step(step: %d)\n", - drive->name, rq->pm->pm_step); + drive->name, pm->pm_step); #endif startstop = ide_start_power_step(drive, rq); if (startstop == ide_stopped && @@ -967,14 +968,13 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) ide_startstop_t startstop; int loops = 0; - /* for atari only: POSSIBLY BROKEN HERE(?) */ - ide_get_lock(ide_intr, hwgroup); - /* caller must own ide_lock */ BUG_ON(!irqs_disabled()); while (!hwgroup->busy) { hwgroup->busy = 1; + /* for atari only */ + ide_get_lock(ide_intr, hwgroup); drive = choose_drive(hwgroup); if (drive == NULL) { int sleeping = 0; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 5d6ba14..c41c3b9 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -457,18 +457,14 @@ int drive_is_ready (ide_drive_t *drive) if (drive->waiting_for_dma) return hwif->dma_ops->dma_test_irq(drive); -#if 0 - /* need to guarantee 400ns since last command was issued */ - udelay(1); -#endif - /* * We do a passive status test under shared PCI interrupts on * cards that truly share the ATA side interrupt, but may also share * an interrupt with another pci card/device. We make no assumptions * about possible isa-pnp and pci-pnp issues yet. */ - if (hwif->io_ports.ctl_addr) + if (hwif->io_ports.ctl_addr && + (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) stat = hwif->tp_ops->read_altstatus(hwif); else /* Note: this may clear a pending IRQ!! */ @@ -610,6 +606,7 @@ static const struct drive_list_entry ivb_list[] = { { "TSSTcorp CDDVDW SH-S202N" , "SB01" }, { "TSSTcorp CDDVDW SH-S202H" , "SB00" }, { "TSSTcorp CDDVDW SH-S202H" , "SB01" }, + { "SAMSUNG SP0822N" , "WA100-10" }, { NULL , NULL } }; diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 1649ea5..c55bdbd 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -266,7 +266,8 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) /* take a deep breath */ msleep(50); - if (io_ports->ctl_addr) { + if (io_ports->ctl_addr && + (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) { a = tp_ops->read_altstatus(hwif); s = tp_ops->read_status(hwif); if ((a ^ s) & ~ATA_IDX) diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c index 2e19d62..7c481bb 100644 --- a/drivers/ide/pmac.c +++ b/drivers/ide/pmac.c @@ -66,7 +66,6 @@ typedef struct pmac_ide_hwif { struct macio_dev *mdev; u32 timings[4]; volatile u32 __iomem * *kauai_fcr; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC /* Those fields are duplicating what is in hwif. We currently * can't use the hwif ones because of some assumptions that are * beeing done by the generic code about the kind of dma controller @@ -74,8 +73,6 @@ typedef struct pmac_ide_hwif { */ volatile struct dbdma_regs __iomem * dma_regs; struct dbdma_cmd* dma_table_cpu; -#endif - } pmac_ide_hwif_t; enum { @@ -222,8 +219,6 @@ static const char* model_name[] = { #define KAUAI_FCR_UATA_RESET_N 0x00000002 #define KAUAI_FCR_UATA_ENABLE 0x00000001 -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - /* Rounded Multiword DMA timings * * I gave up finding a generic formula for all controller @@ -413,8 +408,6 @@ static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq); static void pmac_ide_selectproc(ide_drive_t *drive); static void pmac_ide_kauai_selectproc(ide_drive_t *drive); -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ - #define PMAC_IDE_REG(x) \ ((void __iomem *)((drive)->hwif->io_ports.data_addr + (x))) @@ -584,8 +577,6 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) pmac_ide_do_update_timings(drive); } -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - /* * Calculate KeyLargo ATA/66 UDMA timings */ @@ -786,7 +777,6 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2, drive->name, speed & 0xf, *timings); #endif } -#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) { @@ -804,7 +794,6 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) tl[0] = *timings; tl[1] = *timings2; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC if (speed >= XFER_UDMA_0) { if (pmif->kind == controller_kl_ata4) ret = set_timings_udma_ata4(&tl[0], speed); @@ -817,7 +806,7 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) ret = -1; } else set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed); -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + if (ret) return; @@ -1008,9 +997,7 @@ static const struct ide_port_info pmac_port_info = { .chipset = ide_pmac, .tp_ops = &pmac_tp_ops, .port_ops = &pmac_ide_port_ops, -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC .dma_ops = &pmac_dma_ops, -#endif .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | IDE_HFLAG_POST_SET_MODE | IDE_HFLAG_MMIO | @@ -1182,7 +1169,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) pmif->regbase = regbase; pmif->irq = irq; pmif->kauai_fcr = NULL; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + if (macio_resource_count(mdev) >= 2) { if (macio_request_resource(mdev, 1, "ide-pmac (dma)")) printk(KERN_WARNING "ide-pmac: can't request DMA " @@ -1192,7 +1179,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000); } else pmif->dma_regs = NULL; -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + dev_set_drvdata(&mdev->ofdev.dev, pmif); memset(&hw, 0, sizeof(hw)); @@ -1300,9 +1287,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) base = ioremap(rbase, rlen); pmif->regbase = (unsigned long) base + 0x2000; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC pmif->dma_regs = base + 0x1000; -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ pmif->kauai_fcr = base; pmif->irq = pdev->irq; @@ -1434,8 +1419,6 @@ out: return error; } -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - /* * pmac_ide_build_dmatable builds the DBDMA command list * for a transfer and sets the DBDMA channel to point to it. @@ -1723,13 +1706,6 @@ static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, return 0; } -#else -static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, - const struct ide_port_info *d) -{ - return -EOPNOTSUPP; -} -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ module_init(pmac_ide_probe); diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c index 7defa0a..a687a7d 100644 --- a/drivers/ide/sgiioc4.c +++ b/drivers/ide/sgiioc4.c @@ -550,7 +550,7 @@ static const struct ide_dma_ops sgiioc4_dma_ops = { .dma_timeout = ide_dma_timeout, }; -static const struct ide_port_info sgiioc4_port_info __devinitdata = { +static const struct ide_port_info sgiioc4_port_info __devinitconst = { .name = DRV_NAME, .chipset = ide_pci, .init_dma = ide_dma_sgiioc4, @@ -633,7 +633,7 @@ out: return ret; } -int +int __devinit ioc4_ide_attach_one(struct ioc4_driver_data *idd) { /* PCI-RT does not bring out IDE connection. @@ -645,7 +645,7 @@ ioc4_ide_attach_one(struct ioc4_driver_data *idd) return pci_init_sgiioc4(idd->idd_pdev); } -static struct ioc4_submodule ioc4_ide_submodule = { +static struct ioc4_submodule __devinitdata ioc4_ide_submodule = { .is_name = "IOC4_ide", .is_owner = THIS_MODULE, .is_probe = ioc4_ide_attach_one, diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index 9e39f73..d333ae2 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -1685,6 +1685,7 @@ static int nodemgr_host_thread(void *data) g = get_hpsb_generation(host); for (i = 0; i < 4 ; i++) { msleep_interruptible(63); + try_to_freeze(); if (kthread_should_stop()) goto exit; @@ -1725,6 +1726,7 @@ static int nodemgr_host_thread(void *data) /* Sleep 3 seconds */ for (i = 3000/200; i; i--) { msleep_interruptible(200); + try_to_freeze(); if (kthread_should_stop()) goto exit; diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 69e674e..db22fd9 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -101,7 +101,7 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id) if (cpu_is_omap24xx()) { int i; for (i = 0; i < omap_kp->rows; i++) - disable_irq(OMAP_GPIO_IRQ(row_gpios[i])); + disable_irq(gpio_to_irq(row_gpios[i])); } else /* disable keyboard interrupt and schedule for handling */ omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); @@ -224,7 +224,7 @@ static void omap_kp_tasklet(unsigned long data) if (cpu_is_omap24xx()) { int i; for (i = 0; i < omap_kp_data->rows; i++) - enable_irq(OMAP_GPIO_IRQ(row_gpios[i])); + enable_irq(gpio_to_irq(row_gpios[i])); } else { omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); kp_cur_group = -1; @@ -397,7 +397,7 @@ static int __init omap_kp_probe(struct platform_device *pdev) omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); } else { for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) { - if (request_irq(OMAP_GPIO_IRQ(row_gpios[irq_idx]), + if (request_irq(gpio_to_irq(row_gpios[irq_idx]), omap_kp_interrupt, IRQF_TRIGGER_FALLING, "omap-keypad", omap_kp) < 0) @@ -438,7 +438,7 @@ static int omap_kp_remove(struct platform_device *pdev) gpio_free(col_gpios[i]); for (i = 0; i < omap_kp->rows; i++) { gpio_free(row_gpios[i]); - free_irq(OMAP_GPIO_IRQ(row_gpios[i]), 0); + free_irq(gpio_to_irq(row_gpios[i]), 0); } } else { omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); diff --git a/drivers/isdn/hardware/avm/b1isa.c b/drivers/isdn/hardware/avm/b1isa.c index 1e288ee..6461a32 100644 --- a/drivers/isdn/hardware/avm/b1isa.c +++ b/drivers/isdn/hardware/avm/b1isa.c @@ -233,10 +233,8 @@ static void __exit b1isa_exit(void) int i; for (i = 0; i < MAX_CARDS; i++) { - if (!io[i]) - break; - - b1isa_remove(&isa_dev[i]); + if (isa_dev[i].resource[0].start) + b1isa_remove(&isa_dev[i]); } unregister_capi_driver(&capi_driver_b1isa); } diff --git a/drivers/isdn/hysdn/hysdn_net.c b/drivers/isdn/hysdn/hysdn_net.c index cfa8fa5..3f2a0a2 100644 --- a/drivers/isdn/hysdn/hysdn_net.c +++ b/drivers/isdn/hysdn/hysdn_net.c @@ -83,12 +83,12 @@ net_open(struct net_device *dev) /* Fill in the MAC-level header (if not already set) */ if (!card->mac_addr[0]) { - for (i = 0; i < ETH_ALEN - sizeof(unsigned long); i++) + for (i = 0; i < ETH_ALEN; i++) dev->dev_addr[i] = 0xfc; if ((in_dev = dev->ip_ptr) != NULL) { struct in_ifaddr *ifa = in_dev->ifa_list; if (ifa != NULL) - memcpy(dev->dev_addr + (ETH_ALEN - sizeof(unsigned long)), &ifa->ifa_local, sizeof(unsigned long)); + memcpy(dev->dev_addr + (ETH_ALEN - sizeof(ifa->ifa_local)), &ifa->ifa_local, sizeof(ifa->ifa_local)); } } else memcpy(dev->dev_addr, card->mac_addr, ETH_ALEN); diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index a63161a..04e5fd7 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -668,7 +668,7 @@ static void check_for_valid_limits(struct io_restrictions *rs) if (!rs->max_segment_size) rs->max_segment_size = MAX_SEGMENT_SIZE; if (!rs->seg_boundary_mask) - rs->seg_boundary_mask = -1; + rs->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK; if (!rs->bounce_pfn) rs->bounce_pfn = -1; } diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index 84bdc2e..a443e13 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -354,7 +354,7 @@ static inline void i2o_block_sglist_free(struct i2o_block_request *ireq) * @req: the request to prepare * * Allocate the necessary i2o_block_request struct and connect it to - * the request. This is needed that we not loose the SG list later on. + * the request. This is needed that we not lose the SG list later on. * * Returns BLKPREP_OK on success or BLKPREP_DEFER on failure. */ diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index be2b592..6e53a30 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -49,7 +49,6 @@ static int i2o_hrt_get(struct i2o_controller *c); /** * i2o_msg_get_wait - obtain an I2O message from the IOP * @c: I2O controller - * @msg: pointer to a I2O message pointer * @wait: how long to wait until timeout * * This function waits up to wait seconds for a message slot to be diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c index 8c389d60..3ee698a 100644 --- a/drivers/misc/sgi-gru/grufault.c +++ b/drivers/misc/sgi-gru/grufault.c @@ -254,7 +254,11 @@ static int atomic_pte_lookup(struct vm_area_struct *vma, unsigned long vaddr, return 1; *paddr = pte_pfn(pte) << PAGE_SHIFT; +#ifdef CONFIG_HUGETLB_PAGE *pageshift = is_vm_hugetlb_page(vma) ? HPAGE_SHIFT : PAGE_SHIFT; +#else + *pageshift = PAGE_SHIFT; +#endif return 0; err: diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 5c027b6..6509838 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -481,7 +481,7 @@ struct vm_operations_struct gru_vm_ops = { .fault = gru_fault, }; -module_init(gru_init); +fs_initcall(gru_init); module_exit(gru_exit); module_param(gru_options, ulong, 0644); diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 76a7675..6659b22 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -37,9 +37,9 @@ #define OPCODE_NORM_READ 0x03 /* Read data bytes (low frequency) */ #define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ #define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ -#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ +#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ #define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ -#define OPCODE_BE 0xc7 /* Erase whole flash block */ +#define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */ #define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ #define OPCODE_RDID 0x9f /* Read JEDEC ID */ @@ -167,7 +167,7 @@ static int wait_till_ready(struct m25p *flash) * * Returns 0 if successful, non-zero otherwise. */ -static int erase_block(struct m25p *flash) +static int erase_chip(struct m25p *flash) { DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB\n", flash->spi->dev.bus_id, __func__, @@ -181,7 +181,7 @@ static int erase_block(struct m25p *flash) write_enable(flash); /* Set up command buffer. */ - flash->command[0] = OPCODE_BE; + flash->command[0] = OPCODE_CHIP_ERASE; spi_write(flash->spi, flash->command, 1); @@ -250,15 +250,18 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr) mutex_lock(&flash->lock); - /* REVISIT in some cases we could speed up erasing large regions - * by using OPCODE_SE instead of OPCODE_BE_4K - */ - - /* now erase those sectors */ - if (len == flash->mtd.size && erase_block(flash)) { + /* whole-chip erase? */ + if (len == flash->mtd.size && erase_chip(flash)) { instr->state = MTD_ERASE_FAILED; mutex_unlock(&flash->lock); return -EIO; + + /* REVISIT in some cases we could speed up erasing large regions + * by using OPCODE_SE instead of OPCODE_BE_4K. We may have set up + * to use "small sector erase", but that's not always optimal. + */ + + /* "sector"-at-a-time erase */ } else { while (len) { if (erase_sector(flash, addr)) { @@ -574,10 +577,11 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi) for (tmp = 0, info = m25p_data; tmp < ARRAY_SIZE(m25p_data); tmp++, info++) { - if (info->jedec_id == jedec) - if (ext_jedec != 0 && info->ext_id != ext_jedec) + if (info->jedec_id == jedec) { + if (info->ext_id != 0 && info->ext_id != ext_jedec) continue; return info; + } } dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec); return NULL; diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c index 42d844f..dfbf3f2 100644 --- a/drivers/mtd/maps/physmap.c +++ b/drivers/mtd/maps/physmap.c @@ -19,7 +19,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/mtd/concat.h> -#include <asm/io.h> +#include <linux/io.h> #define MAX_RESOURCES 4 @@ -27,7 +27,6 @@ struct physmap_flash_info { struct mtd_info *mtd[MAX_RESOURCES]; struct mtd_info *cmtd; struct map_info map[MAX_RESOURCES]; - struct resource *res; #ifdef CONFIG_MTD_PARTITIONS int nr_parts; struct mtd_partition *parts; @@ -70,16 +69,7 @@ static int physmap_flash_remove(struct platform_device *dev) #endif map_destroy(info->mtd[i]); } - - if (info->map[i].virt != NULL) - iounmap(info->map[i].virt); - } - - if (info->res != NULL) { - release_resource(info->res); - kfree(info->res); } - return 0; } @@ -101,7 +91,8 @@ static int physmap_flash_probe(struct platform_device *dev) if (physmap_data == NULL) return -ENODEV; - info = kzalloc(sizeof(struct physmap_flash_info), GFP_KERNEL); + info = devm_kzalloc(&dev->dev, sizeof(struct physmap_flash_info), + GFP_KERNEL); if (info == NULL) { err = -ENOMEM; goto err_out; @@ -114,10 +105,10 @@ static int physmap_flash_probe(struct platform_device *dev) (unsigned long long)(dev->resource[i].end - dev->resource[i].start + 1), (unsigned long long)dev->resource[i].start); - info->res = request_mem_region(dev->resource[i].start, - dev->resource[i].end - dev->resource[i].start + 1, - dev->dev.bus_id); - if (info->res == NULL) { + if (!devm_request_mem_region(&dev->dev, + dev->resource[i].start, + dev->resource[i].end - dev->resource[i].start + 1, + dev->dev.bus_id)) { dev_err(&dev->dev, "Could not reserve memory region\n"); err = -ENOMEM; goto err_out; @@ -129,7 +120,8 @@ static int physmap_flash_probe(struct platform_device *dev) info->map[i].bankwidth = physmap_data->width; info->map[i].set_vpp = physmap_data->set_vpp; - info->map[i].virt = ioremap(info->map[i].phys, info->map[i].size); + info->map[i].virt = devm_ioremap(&dev->dev, info->map[i].phys, + info->map[i].size); if (info->map[i].virt == NULL) { dev_err(&dev->dev, "Failed to ioremap flash region\n"); err = EIO; diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c index 024e3ff..a83192f 100644 --- a/drivers/mtd/nand/fsl_upm.c +++ b/drivers/mtd/nand/fsl_upm.c @@ -163,9 +163,11 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun, ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0); #ifdef CONFIG_MTD_OF_PARTS - if (ret == 0) - ret = of_mtd_parse_partitions(fun->dev, &fun->mtd, - flash_np, &fun->parts); + if (ret == 0) { + ret = of_mtd_parse_partitions(fun->dev, flash_np, &fun->parts); + if (ret < 0) + goto err; + } #endif if (ret > 0) ret = add_mtd_partitions(&fun->mtd, fun->parts, ret); diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 75c8990..9bd6c9a 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -141,6 +141,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev, } lpcctl = pci_resource_start(pdev, 0); + pci_dev_put(pdev); if (!request_region(lpcctl, 4, driver_name)) { err = -EBUSY; diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index ce5752a..fc41444 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -269,6 +269,7 @@ static struct pxa3xx_nand_timing stm2GbX16_timing = { static struct pxa3xx_nand_flash stm2GbX16 = { .timing = &stm2GbX16_timing, + .cmdset = &largepage_cmdset, .page_per_block = 64, .page_size = 2048, .flash_width = 16, diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index e39b21d..d1e0b8e 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -32,19 +32,18 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/mach/flash.h> -#include <asm/arch/gpmc.h> -#include <asm/arch/onenand.h> -#include <asm/arch/gpio.h> -#include <asm/arch/pm.h> +#include <mach/gpmc.h> +#include <mach/onenand.h> +#include <mach/gpio.h> +#include <mach/pm.h> -#include <linux/dma-mapping.h> -#include <asm/dma-mapping.h> -#include <asm/arch/dma.h> +#include <mach/dma.h> -#include <asm/arch/board.h> +#include <mach/board.h> #define DRIVER_NAME "omap2-onenand" @@ -150,7 +149,7 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state) INIT_COMPLETION(c->irq_done); if (c->gpio_irq) { - result = omap_get_gpio_datain(c->gpio_irq); + result = gpio_get_value(c->gpio_irq); if (result == -1) { ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS); intr = read_reg(c, ONENAND_REG_INTERRUPT); @@ -635,9 +634,9 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) "OneNAND\n", c->gpio_irq); goto err_iounmap; } - omap_set_gpio_direction(c->gpio_irq, 1); + gpio_direction_input(c->gpio_irq); - if ((r = request_irq(OMAP_GPIO_IRQ(c->gpio_irq), + if ((r = request_irq(gpio_to_irq(c->gpio_irq), omap2_onenand_interrupt, IRQF_TRIGGER_RISING, pdev->dev.driver->name, c)) < 0) goto err_release_gpio; @@ -724,7 +723,7 @@ err_release_dma: if (c->dma_channel != -1) omap_free_dma(c->dma_channel); if (c->gpio_irq) - free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c); + free_irq(gpio_to_irq(c->gpio_irq), c); err_release_gpio: if (c->gpio_irq) omap_free_gpio(c->gpio_irq); @@ -761,7 +760,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) omap2_onenand_shutdown(pdev); platform_set_drvdata(pdev, NULL); if (c->gpio_irq) { - free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c); + free_irq(gpio_to_irq(c->gpio_irq), c); omap_free_gpio(c->gpio_irq); } iounmap(c->onenand.base); diff --git a/drivers/net/Makefile b/drivers/net/Makefile index f19acf8..017383a 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -114,7 +114,7 @@ obj-$(CONFIG_EL2) += 3c503.o 8390p.o obj-$(CONFIG_NE2000) += ne.o 8390p.o obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o obj-$(CONFIG_HPLAN) += hp.o 8390p.o -obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o +obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index d07e3f1..a1a3d0e 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -3144,6 +3144,28 @@ bnx2_has_work(struct bnx2_napi *bnapi) return 0; } +static void +bnx2_chk_missed_msi(struct bnx2 *bp) +{ + struct bnx2_napi *bnapi = &bp->bnx2_napi[0]; + u32 msi_ctrl; + + if (bnx2_has_work(bnapi)) { + msi_ctrl = REG_RD(bp, BNX2_PCICFG_MSI_CONTROL); + if (!(msi_ctrl & BNX2_PCICFG_MSI_CONTROL_ENABLE)) + return; + + if (bnapi->last_status_idx == bp->idle_chk_status_idx) { + REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl & + ~BNX2_PCICFG_MSI_CONTROL_ENABLE); + REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl); + bnx2_msi(bp->irq_tbl[0].vector, bnapi); + } + } + + bp->idle_chk_status_idx = bnapi->last_status_idx; +} + static void bnx2_poll_link(struct bnx2 *bp, struct bnx2_napi *bnapi) { struct status_block *sblk = bnapi->status_blk.msi; @@ -3218,14 +3240,15 @@ static int bnx2_poll(struct napi_struct *napi, int budget) work_done = bnx2_poll_work(bp, bnapi, work_done, budget); - if (unlikely(work_done >= budget)) - break; - /* bnapi->last_status_idx is used below to tell the hw how * much work has been processed, so we must read it before * checking for more work. */ bnapi->last_status_idx = sblk->status_idx; + + if (unlikely(work_done >= budget)) + break; + rmb(); if (likely(!bnx2_has_work(bnapi))) { netif_rx_complete(bp->dev, napi); @@ -4570,6 +4593,8 @@ bnx2_init_chip(struct bnx2 *bp) for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) bp->bnx2_napi[i].last_status_idx = 0; + bp->idle_chk_status_idx = 0xffff; + bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE; /* Set up how to generate a link change interrupt. */ @@ -5718,6 +5743,10 @@ bnx2_timer(unsigned long data) if (atomic_read(&bp->intr_sem) != 0) goto bnx2_restart_timer; + if ((bp->flags & (BNX2_FLAG_USING_MSI | BNX2_FLAG_ONE_SHOT_MSI)) == + BNX2_FLAG_USING_MSI) + bnx2_chk_missed_msi(bp); + bnx2_send_heart_beat(bp); bp->stats_blk->stat_FwRxDrop = diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 617d953..0b032c3 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -378,6 +378,9 @@ struct l2_fhdr { * pci_config_l definition * offset: 0000 */ +#define BNX2_PCICFG_MSI_CONTROL 0x00000058 +#define BNX2_PCICFG_MSI_CONTROL_ENABLE (1L<<16) + #define BNX2_PCICFG_MISC_CONFIG 0x00000068 #define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP (1L<<2) #define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP (1L<<3) @@ -6863,6 +6866,9 @@ struct bnx2 { u8 num_tx_rings; u8 num_rx_rings; + + u32 idle_chk_status_idx; + }; #define REG_RD(bp, offset) \ diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index d6c7d2a..7092df5 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -1035,10 +1035,6 @@ MODULE_PARM_DESC(copybreak, "Receive copy threshold"); * @pdev: the PCI device that received the packet * @fl: the SGE free list holding the packet * @len: the actual packet length, excluding any SGE padding - * @dma_pad: padding at beginning of buffer left by SGE DMA - * @skb_pad: padding to be used if the packet is copied - * @copy_thres: length threshold under which a packet should be copied - * @drop_thres: # of remaining buffers before we start dropping packets * * Get the next packet from a free list and complete setup of the * sk_buff. If the packet is small we make a copy and recycle the diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 91795f7..122539a 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -345,7 +345,6 @@ no_buffers: /** * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers * @adapter: address of board private structure - * @rx_ring: pointer to receive ring structure * @cleaned_count: number of buffers to allocate this pass **/ diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index e1b441e..c414554 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -568,6 +568,17 @@ static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end) return erxrdpt; } +/* + * Calculate wrap around when reading beyond the end of the RX buffer + */ +static u16 rx_packet_start(u16 ptr) +{ + if (ptr + RSV_SIZE > RXEND_INIT) + return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1); + else + return ptr + RSV_SIZE; +} + static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end) { u16 erxrdpt; @@ -938,8 +949,9 @@ static void enc28j60_hw_rx(struct net_device *ndev) skb->dev = ndev; skb_reserve(skb, NET_IP_ALIGN); /* copy the packet from the receive buffer */ - enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv), - len, skb_put(skb, len)); + enc28j60_mem_read(priv, + rx_packet_start(priv->next_pk_ptr), + len, skb_put(skb, len)); if (netif_msg_pktdata(priv)) dump_packet(__func__, skb->len, skb->data); skb->protocol = eth_type_trans(skb, ndev); diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c index fbbd3e6..c01e290 100644 --- a/drivers/net/hp-plus.c +++ b/drivers/net/hp-plus.c @@ -230,7 +230,7 @@ static int __init hpp_probe1(struct net_device *dev, int ioaddr) dev->open = &hpp_open; dev->stop = &hpp_close; #ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = ei_poll; + dev->poll_controller = eip_poll; #endif ei_status.name = name; diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 1cbae85..20d27e6 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1980,7 +1980,6 @@ static void igb_configure_rx(struct igb_adapter *adapter) /** * igb_free_tx_resources - Free Tx Resources per Queue - * @adapter: board private structure * @tx_ring: Tx descriptor ring for a specific queue * * Free all transmit software resources @@ -2033,7 +2032,6 @@ static void igb_unmap_and_free_tx_resource(struct igb_adapter *adapter, /** * igb_clean_tx_ring - Free Tx Buffers - * @adapter: board private structure * @tx_ring: ring to be cleaned **/ static void igb_clean_tx_ring(struct igb_ring *tx_ring) @@ -2080,7 +2078,6 @@ static void igb_clean_all_tx_rings(struct igb_adapter *adapter) /** * igb_free_rx_resources - Free Rx Resources - * @adapter: board private structure * @rx_ring: ring to clean the resources from * * Free all receive software resources @@ -2120,7 +2117,6 @@ static void igb_free_all_rx_resources(struct igb_adapter *adapter) /** * igb_clean_rx_ring - Free Rx Buffers per Queue - * @adapter: board private structure * @rx_ring: ring to free buffers from **/ static void igb_clean_rx_ring(struct igb_ring *rx_ring) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 8ed823a..5236f63 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1320,7 +1320,6 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) * ixgbe_intr - legacy mode Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure - * @pt_regs: CPU registers structure **/ static irqreturn_t ixgbe_intr(int irq, void *data) { diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 4239450..590039c 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -70,6 +70,9 @@ static void macvlan_broadcast(struct sk_buff *skb, struct sk_buff *nskb; unsigned int i; + if (skb->protocol == htons(ETH_P_PAUSE)) + return; + for (i = 0; i < MACVLAN_HASH_SIZE; i++) { hlist_for_each_entry_rcu(vlan, n, &port->vlan_hash[i], hlist) { dev = vlan->dev; diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c index b9bed82..b289a0a 100644 --- a/drivers/net/netx-eth.c +++ b/drivers/net/netx-eth.c @@ -401,6 +401,8 @@ static int netx_eth_drv_probe(struct platform_device *pdev) priv->xmac_base = priv->xc->xmac_base; priv->sram_base = priv->xc->sram_base; + spin_lock_init(&priv->lock); + ret = pfifo_request(PFIFO_MASK(priv->id)); if (ret) { printk("unable to request PFIFO\n"); diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index b37a498..0418045 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -779,6 +779,7 @@ static struct pcmcia_device_id axnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2), PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8), PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609), + PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEtherCard", 0x281f1c5d, 0x7ef26116), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FEP501", 0x281f1c5d, 0x2e272058), @@ -1174,7 +1175,6 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) * ax_interrupt - handle the interrupts from an 8390 * @irq: interrupt number * @dev_id: a pointer to the net_device - * @regs: unused * * Handle the ether interface interrupts. We pull packets from * the 8390 via the card specific functions and fire them at the networking diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index e40d630..ce486f0 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1693,7 +1693,6 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8), PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76), PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e), - PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875), PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f), PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b), diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 55bc24b..25acbbd 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -227,8 +227,17 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) if (r) return ERR_PTR(r); - /* If the phy_id is all Fs or all 0s, there is no device there */ - if ((0xffff == phy_id) || (0x00 == phy_id)) + /* If the phy_id is mostly Fs, there is no device there */ + if ((phy_id & 0x1fffffff) == 0x1fffffff) + return NULL; + + /* + * Broken hardware is sometimes missing the pull down resistor on the + * MDIO line, which results in reads to non-existent devices returning + * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent + * device as well. + */ + if (phy_id == 0) return NULL; dev = phy_device_create(bus, addr, phy_id); diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 8874497..dd3b244 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -34,6 +34,8 @@ #define MII_VSC8244_IMASK_DUPLEX 0x1000 #define MII_VSC8244_IMASK_MASK 0xf000 +#define MII_VSC8221_IMASK_MASK 0xa000 + /* Vitesse Interrupt Status Register */ #define MII_VSC8244_ISTAT 0x1a #define MII_VSC8244_ISTAT_STATUS 0x8000 @@ -49,6 +51,12 @@ #define MII_VSC8244_AUXCONSTAT_GBIT 0x0010 #define MII_VSC8244_AUXCONSTAT_100 0x0008 +#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */ +#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004 + +#define PHY_ID_VSC8244 0x000fc6c0 +#define PHY_ID_VSC8221 0x000fc550 + MODULE_DESCRIPTION("Vitesse PHY driver"); MODULE_AUTHOR("Kriston Carson"); MODULE_LICENSE("GPL"); @@ -95,13 +103,15 @@ static int vsc824x_ack_interrupt(struct phy_device *phydev) return (err < 0) ? err : 0; } -static int vsc824x_config_intr(struct phy_device *phydev) +static int vsc82xx_config_intr(struct phy_device *phydev) { int err; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, MII_VSC8244_IMASK, - MII_VSC8244_IMASK_MASK); + phydev->drv->phy_id == PHY_ID_VSC8244 ? + MII_VSC8244_IMASK_MASK : + MII_VSC8221_IMASK_MASK); else { /* * The Vitesse PHY cannot clear the interrupt @@ -120,7 +130,7 @@ static int vsc824x_config_intr(struct phy_device *phydev) /* Vitesse 824x */ static struct phy_driver vsc8244_driver = { - .phy_id = 0x000fc6c0, + .phy_id = PHY_ID_VSC8244, .name = "Vitesse VSC8244", .phy_id_mask = 0x000fffc0, .features = PHY_GBIT_FEATURES, @@ -129,19 +139,55 @@ static struct phy_driver vsc8244_driver = { .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, .ack_interrupt = &vsc824x_ack_interrupt, - .config_intr = &vsc824x_config_intr, + .config_intr = &vsc82xx_config_intr, .driver = { .owner = THIS_MODULE,}, }; -static int __init vsc8244_init(void) +static int vsc8221_config_init(struct phy_device *phydev) { - return phy_driver_register(&vsc8244_driver); + int err; + + err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT, + MII_VSC8221_AUXCONSTAT_INIT); + return err; + + /* Perhaps we should set EXT_CON1 based on the interface? + Options are 802.3Z SerDes or SGMII */ +} + +/* Vitesse 8221 */ +static struct phy_driver vsc8221_driver = { + .phy_id = PHY_ID_VSC8221, + .phy_id_mask = 0x000ffff0, + .name = "Vitesse VSC8221", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &vsc8221_config_init, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init vsc82xx_init(void) +{ + int err; + + err = phy_driver_register(&vsc8244_driver); + if (err < 0) + return err; + err = phy_driver_register(&vsc8221_driver); + if (err < 0) + phy_driver_unregister(&vsc8244_driver); + return err; } -static void __exit vsc8244_exit(void) +static void __exit vsc82xx_exit(void) { phy_driver_unregister(&vsc8244_driver); + phy_driver_unregister(&vsc8221_driver); } -module_init(vsc8244_init); -module_exit(vsc8244_exit); +module_init(vsc82xx_init); +module_exit(vsc82xx_exit); diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 185b1df..e98d977 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -1353,6 +1353,7 @@ static int pppol2tp_release(struct socket *sock) kfree_skb(skb); sock_put(sk); } + sock_put(sk); } release_sock(sk); diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index fa3a460..8e8337e 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -1630,7 +1630,6 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev) * sis900_interrupt - sis900 interrupt handler * @irq: the irq number * @dev_instance: the client data object - * @regs: snapshot of processor context * * The interrupt handler does all of the Rx thread work, * and cleans up after the Tx thread diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index b6435d0..07599b4 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -672,7 +672,6 @@ write_hash: /** * spider_net_prepare_tx_descr - fill tx descriptor with skb data * @card: card structure - * @descr: descriptor structure to fill out * @skb: packet to use * * returns 0 on success, <0 on failure. @@ -867,7 +866,6 @@ spider_net_release_tx_chain(struct spider_net_card *card, int brutal) /** * spider_net_kick_tx_dma - enables TX DMA processing * @card: card structure - * @descr: descriptor address to enable TX processing at * * This routine will start the transmit DMA running if * it is not already running. This routine ned only be @@ -1637,7 +1635,6 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg, * spider_net_interrupt - interrupt handler for spider_net * @irq: interrupt number * @ptr: pointer to net_device - * @regs: PU registers * * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no * interrupt found raised by card. @@ -2419,7 +2416,6 @@ spider_net_undo_pci_setup(struct spider_net_card *card) /** * spider_net_setup_pci_dev - sets up the device in terms of PCI operations - * @card: card structure * @pdev: PCI device * * Returns the card structure or NULL if any errors occur diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 4291458..1349e41 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -1714,7 +1714,7 @@ static void gem_init_phy(struct gem *gp) /* Reset PCS unit. */ val = readl(gp->regs + PCS_MIICTRL); val |= PCS_MIICTRL_RST; - writeb(val, gp->regs + PCS_MIICTRL); + writel(val, gp->regs + PCS_MIICTRL); limit = 32; while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) { diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index cfd4d05..2d14255 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -240,6 +240,10 @@ static u64 ath5k_get_tsf(struct ieee80211_hw *hw); static void ath5k_reset_tsf(struct ieee80211_hw *hw); static int ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb); +static void ath5k_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes); static struct ieee80211_ops ath5k_hw_ops = { .tx = ath5k_tx, @@ -256,6 +260,7 @@ static struct ieee80211_ops ath5k_hw_ops = { .get_tx_stats = ath5k_get_tx_stats, .get_tsf = ath5k_get_tsf, .reset_tsf = ath5k_reset_tsf, + .bss_info_changed = ath5k_bss_info_changed, }; /* @@ -2942,7 +2947,7 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, sc->opmode != NL80211_IFTYPE_MESH_POINT && test_bit(ATH_STAT_PROMISC, sc->status)) rfilt |= AR5K_RX_FILTER_PROM; - if (sc->opmode == NL80211_IFTYPE_STATION || + if ((sc->opmode == NL80211_IFTYPE_STATION && sc->assoc) || sc->opmode == NL80211_IFTYPE_ADHOC) { rfilt |= AR5K_RX_FILTER_BEACON; } @@ -3083,4 +3088,32 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) end: return ret; } +static void +set_beacon_filter(struct ieee80211_hw *hw, bool enable) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + u32 rfilt; + rfilt = ath5k_hw_get_rx_filter(ah); + if (enable) + rfilt |= AR5K_RX_FILTER_BEACON; + else + rfilt &= ~AR5K_RX_FILTER_BEACON; + ath5k_hw_set_rx_filter(ah, rfilt); + sc->filter_flags = rfilt; +} +static void ath5k_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + struct ath5k_softc *sc = hw->priv; + if (changes & BSS_CHANGED_ASSOC) { + mutex_lock(&sc->lock); + sc->assoc = bss_conf->assoc; + if (sc->opmode == NL80211_IFTYPE_STATION) + set_beacon_filter(hw, sc->assoc); + mutex_unlock(&sc->lock); + } +} diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index 06d1054..facc60d 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -179,6 +179,7 @@ struct ath5k_softc { struct timer_list calib_tim; /* calibration timer */ int power_level; /* Requested tx power in dbm */ + bool assoc; /* assocate state */ }; #define ath5k_hw_hasbssidmask(_ah) \ diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 19980cb..ccaeb5c 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -417,19 +417,19 @@ ath5k_debug_init_device(struct ath5k_softc *sc) sc->debug.debugfs_phydir = debugfs_create_dir(wiphy_name(sc->hw->wiphy), ath5k_global_debugfs); - sc->debug.debugfs_debug = debugfs_create_file("debug", 0666, + sc->debug.debugfs_debug = debugfs_create_file("debug", S_IWUSR | S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_debug); - sc->debug.debugfs_registers = debugfs_create_file("registers", 0444, + sc->debug.debugfs_registers = debugfs_create_file("registers", S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_registers); - sc->debug.debugfs_tsf = debugfs_create_file("tsf", 0666, + sc->debug.debugfs_tsf = debugfs_create_file("tsf", S_IWUSR | S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_tsf); - sc->debug.debugfs_beacon = debugfs_create_file("beacon", 0666, + sc->debug.debugfs_beacon = debugfs_create_file("beacon", S_IWUSR | S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_beacon); - sc->debug.debugfs_reset = debugfs_create_file("reset", 0222, + sc->debug.debugfs_reset = debugfs_create_file("reset", S_IWUSR, sc->debug.debugfs_phydir, sc, &fops_reset); } diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index 9e15c30..4dd1c1b 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -170,7 +170,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) skb = (struct sk_buff *)bf->bf_mpdu; if (skb) { pci_unmap_single(sc->pdev, bf->bf_dmacontext, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); } @@ -193,7 +193,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) bf->bf_buf_addr = bf->bf_dmacontext = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data); @@ -352,7 +352,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) if (bf->bf_mpdu != NULL) { skb = (struct sk_buff *)bf->bf_mpdu; pci_unmap_single(sc->pdev, bf->bf_dmacontext, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); bf->bf_mpdu = NULL; @@ -412,7 +412,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) bf->bf_buf_addr = bf->bf_dmacontext = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); bf->bf_mpdu = skb; @@ -439,7 +439,7 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) if (bf->bf_mpdu != NULL) { struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; pci_unmap_single(sc->pdev, bf->bf_dmacontext, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); bf->bf_mpdu = NULL; diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 4983402..504a044 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -49,10 +49,12 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) ASSERT(skb != NULL); ds->ds_vdata = skb->data; - /* setup rx descriptors */ + /* setup rx descriptors. The sc_rxbufsize here tells the harware + * how much data it can DMA to us and that we are prepared + * to process */ ath9k_hw_setuprxdesc(ah, ds, - skb_tailroom(skb), /* buffer size */ + sc->sc_rxbufsize, 0); if (sc->sc_rxlink == NULL) @@ -398,6 +400,13 @@ static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, * in rx'd frames. */ + /* Note: the kernel can allocate a value greater than + * what we ask it to give us. We really only need 4 KB as that + * is this hardware supports and in fact we need at least 3849 + * as that is the MAX AMSDU size this hardware supports. + * Unfortunately this means we may get 8 KB here from the + * kernel... and that is actually what is observed on some + * systems :( */ skb = dev_alloc_skb(len + sc->sc_cachelsz - 1); if (skb != NULL) { off = ((unsigned long) skb->data) % sc->sc_cachelsz; @@ -456,7 +465,7 @@ static int ath_rx_indicate(struct ath_softc *sc, if (nskb != NULL) { bf->bf_mpdu = nskb; bf->bf_buf_addr = pci_map_single(sc->pdev, nskb->data, - skb_end_pointer(nskb) - nskb->head, + sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); bf->bf_dmacontext = bf->bf_buf_addr; ATH_RX_CONTEXT(nskb)->ctx_rxbuf = bf; @@ -542,7 +551,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) bf->bf_mpdu = skb; bf->bf_buf_addr = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, + sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); bf->bf_dmacontext = bf->bf_buf_addr; ATH_RX_CONTEXT(skb)->ctx_rxbuf = bf; @@ -1007,7 +1016,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) pci_dma_sync_single_for_cpu(sc->pdev, bf->bf_buf_addr, - skb_tailroom(skb), + sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); pci_unmap_single(sc->pdev, bf->bf_buf_addr, diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index dcce3542..7a9f901 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -3897,6 +3897,7 @@ static int ipw_disassociate(void *data) if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING))) return 0; ipw_send_disassociate(data, 0); + netif_carrier_off(priv->net_dev); return 1; } @@ -10190,6 +10191,9 @@ static int ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb, u16 remaining_bytes; int fc; + if (!(priv->status & STATUS_ASSOCIATED)) + goto drop; + hdr_len = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl)); switch (priv->ieee->iw_mode) { case IW_MODE_ADHOC: diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 444c5cc..c4c0371 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1384,9 +1384,11 @@ void iwl_rx_handle(struct iwl_priv *priv) rxq->queue[i] = NULL; - pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->aligned_dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); + dma_sync_single_range_for_cpu( + &priv->pci_dev->dev, rxb->real_dma_addr, + rxb->aligned_dma_addr - rxb->real_dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); pkt = (struct iwl_rx_packet *)rxb->skb->data; /* Reclaim a command buffer only if this packet is a response diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 4c312c5..01a8458 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -290,6 +290,9 @@ void iwl_clear_stations_table(struct iwl_priv *priv) priv->num_stations = 0; memset(priv->stations, 0, sizeof(priv->stations)); + /* clean ucode key table bit map */ + priv->ucode_key_table = 0; + spin_unlock_irqrestore(&priv->sta_lock, flags); } EXPORT_SYMBOL(iwl_clear_stations_table); diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 61797f3..26f7084 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -475,7 +475,7 @@ static int iwl_get_free_ucode_key_index(struct iwl_priv *priv) if (!test_and_set_bit(i, &priv->ucode_key_table)) return i; - return -1; + return WEP_INVALID_OFFSET; } int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, u8 send_if_empty) @@ -620,6 +620,9 @@ static int iwl_set_wep_dynamic_key_info(struct iwl_priv *priv, /* else, we are overriding an existing key => no need to allocated room * in uCode. */ + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for new kew"); + priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; @@ -637,6 +640,7 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv, { unsigned long flags; __le16 key_flags = 0; + int ret; key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); @@ -664,14 +668,18 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv, /* else, we are overriding an existing key => no need to allocated room * in uCode. */ + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for new kew"); + priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + spin_unlock_irqrestore(&priv->sta_lock, flags); - IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n"); - return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + return ret; } static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, @@ -696,6 +704,9 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, /* else, we are overriding an existing key => no need to allocated room * in uCode. */ + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for new kew"); + /* This copy is acutally not needed: we get the key with each TX */ memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16); @@ -734,6 +745,13 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, return 0; } + if (priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET) { + IWL_WARNING("Removing wrong key %d 0x%x\n", + keyconf->keyidx, key_flags); + spin_unlock_irqrestore(&priv->sta_lock, flags); + return 0; + } + if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset, &priv->ucode_key_table)) IWL_ERROR("index %d not used in uCode key table.\n", diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index fe1867b..cac732f 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -615,7 +615,7 @@ static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr, struct ieee80211_hdr *tx_hdr; tx_hdr = (struct ieee80211_hdr *)skb->data; - if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1))) + if (likely(!memcmp(tx_hdr->addr2, rx_hdr->addr1, ETH_ALEN))) { __skb_unlink(skb, q); tx_status(hw, skb, IEEE80211_TX_STAT_ACK, stats->signal, 1); diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 8f63f4c..9aad608 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -16,6 +16,7 @@ #include <linux/pm.h> #include <linux/init.h> #include <linux/slab.h> +#include <linux/jiffies.h> #include <linux/pci-aspm.h> #include "../pci.h" @@ -161,11 +162,12 @@ static void pcie_check_clock_pm(struct pci_dev *pdev) */ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) { - int pos, child_pos; + int pos, child_pos, i = 0; u16 reg16 = 0; struct pci_dev *child_dev; int same_clock = 1; - + unsigned long start_jiffies; + u16 child_regs[8], parent_reg; /* * all functions of a slot should have the same Slot Clock * Configuration, so just check one function @@ -191,16 +193,19 @@ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL, ®16); + child_regs[i] = reg16; if (same_clock) reg16 |= PCI_EXP_LNKCTL_CCC; else reg16 &= ~PCI_EXP_LNKCTL_CCC; pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL, reg16); + i++; } /* Configure upstream component */ pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); + parent_reg = reg16; if (same_clock) reg16 |= PCI_EXP_LNKCTL_CCC; else @@ -212,12 +217,30 @@ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); /* Wait for link training end */ - while (1) { + /* break out after waiting for 1 second */ + start_jiffies = jiffies; + while ((jiffies - start_jiffies) < HZ) { pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16); if (!(reg16 & PCI_EXP_LNKSTA_LT)) break; cpu_relax(); } + /* training failed -> recover */ + if ((jiffies - start_jiffies) >= HZ) { + dev_printk (KERN_ERR, &pdev->dev, "ASPM: Could not configure" + " common clock\n"); + i = 0; + list_for_each_entry(child_dev, &pdev->subordinate->devices, + bus_list) { + child_pos = pci_find_capability(child_dev, + PCI_CAP_ID_EXP); + pci_write_config_word(child_dev, + child_pos + PCI_EXP_LNKCTL, + child_regs[i]); + i++; + } + pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, parent_reg); + } } /* diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 5049a47..5f4f85f 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -22,6 +22,7 @@ #include <linux/delay.h> #include <linux/acpi.h> #include <linux/kallsyms.h> +#include <linux/dmi.h> #include "pci.h" int isa_dma_bridge_buggy; @@ -1828,6 +1829,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, ht_enable_msi_mapping); +/* The P5N32-SLI Premium motherboard from Asus has a problem with msi + * for the MCP55 NIC. It is not yet determined whether the msi problem + * also affects other devices. As for now, turn off msi for this device. + */ +static void __devinit nvenet_msi_disable(struct pci_dev *dev) +{ + if (dmi_name_in_vendors("P5N32-SLI PREMIUM")) { + dev_info(&dev->dev, + "Disabling msi for MCP55 NIC on P5N32-SLI Premium\n"); + dev->no_msi = 1; + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, + PCI_DEVICE_ID_NVIDIA_NVENET_15, + nvenet_msi_disable); + static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) { struct pci_dev *host_bridge; diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index 4dd1c3e..5a8ccb4 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -253,6 +253,7 @@ placeholder: __func__, pci_domain_nr(parent), parent->number, slot_nr); out: + kfree(slot_name); up_write(&pci_bus_sem); return slot; err: diff --git a/drivers/rtc/rtc-ds1672.c b/drivers/rtc/rtc-ds1672.c index 341d7a5..4e91419 100644 --- a/drivers/rtc/rtc-ds1672.c +++ b/drivers/rtc/rtc-ds1672.c @@ -209,12 +209,18 @@ static int ds1672_probe(struct i2c_client *client, return err; } +static struct i2c_device_id ds1672_id[] = { + { "ds1672", 0 }, + { } +}; + static struct i2c_driver ds1672_driver = { .driver = { .name = "rtc-ds1672", }, .probe = &ds1672_probe, .remove = &ds1672_remove, + .id_table = ds1672_id, }; static int __init ds1672_init(void) diff --git a/drivers/rtc/rtc-max6900.c b/drivers/rtc/rtc-max6900.c index 8078279..a4f6665 100644 --- a/drivers/rtc/rtc-max6900.c +++ b/drivers/rtc/rtc-max6900.c @@ -247,12 +247,18 @@ max6900_probe(struct i2c_client *client, const struct i2c_device_id *id) return 0; } +static struct i2c_device_id max6900_id[] = { + { "max6900", 0 }, + { } +}; + static struct i2c_driver max6900_driver = { .driver = { .name = "rtc-max6900", }, .probe = max6900_probe, .remove = max6900_remove, + .id_table = max6900_id, }; static int __init max6900_init(void) diff --git a/drivers/rtc/rtc-starfire.c b/drivers/rtc/rtc-starfire.c index 7ccb0dd..5be98bf 100644 --- a/drivers/rtc/rtc-starfire.c +++ b/drivers/rtc/rtc-starfire.c @@ -6,7 +6,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> -#include <linux/time.h> #include <linux/rtc.h> #include <linux/platform_device.h> @@ -16,11 +15,6 @@ MODULE_AUTHOR("David S. Miller <davem@davemloft.net>"); MODULE_DESCRIPTION("Starfire RTC driver"); MODULE_LICENSE("GPL"); -struct starfire_rtc { - struct rtc_device *rtc; - spinlock_t lock; -}; - static u32 starfire_get_time(void) { static char obp_gettod[32]; @@ -35,64 +29,31 @@ static u32 starfire_get_time(void) static int starfire_read_time(struct device *dev, struct rtc_time *tm) { - struct starfire_rtc *p = dev_get_drvdata(dev); - unsigned long flags, secs; - - spin_lock_irqsave(&p->lock, flags); - secs = starfire_get_time(); - spin_unlock_irqrestore(&p->lock, flags); - - rtc_time_to_tm(secs, tm); - - return 0; -} - -static int starfire_set_time(struct device *dev, struct rtc_time *tm) -{ - unsigned long secs; - int err; - - err = rtc_tm_to_time(tm, &secs); - if (err) - return err; - - /* Do nothing, time is set using the service processor - * console on this platform. - */ - return 0; + rtc_time_to_tm(starfire_get_time(), tm); + return rtc_valid_tm(tm); } static const struct rtc_class_ops starfire_rtc_ops = { .read_time = starfire_read_time, - .set_time = starfire_set_time, }; -static int __devinit starfire_rtc_probe(struct platform_device *pdev) +static int __init starfire_rtc_probe(struct platform_device *pdev) { - struct starfire_rtc *p = kzalloc(sizeof(*p), GFP_KERNEL); - - if (!p) - return -ENOMEM; + struct rtc_device *rtc = rtc_device_register("starfire", &pdev->dev, + &starfire_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); - spin_lock_init(&p->lock); + platform_set_drvdata(pdev, rtc); - p->rtc = rtc_device_register("starfire", &pdev->dev, - &starfire_rtc_ops, THIS_MODULE); - if (IS_ERR(p->rtc)) { - int err = PTR_ERR(p->rtc); - kfree(p); - return err; - } - platform_set_drvdata(pdev, p); return 0; } -static int __devexit starfire_rtc_remove(struct platform_device *pdev) +static int __exit starfire_rtc_remove(struct platform_device *pdev) { - struct starfire_rtc *p = platform_get_drvdata(pdev); + struct rtc_device *rtc = platform_get_drvdata(pdev); - rtc_device_unregister(p->rtc); - kfree(p); + rtc_device_unregister(rtc); return 0; } @@ -102,13 +63,12 @@ static struct platform_driver starfire_rtc_driver = { .name = "rtc-starfire", .owner = THIS_MODULE, }, - .probe = starfire_rtc_probe, - .remove = __devexit_p(starfire_rtc_remove), + .remove = __exit_p(starfire_rtc_remove), }; static int __init starfire_rtc_init(void) { - return platform_driver_register(&starfire_rtc_driver); + return platform_driver_probe(&starfire_rtc_driver, starfire_rtc_probe); } static void __exit starfire_rtc_exit(void) diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c index abe87a4..01d8da9 100644 --- a/drivers/rtc/rtc-twl4030.c +++ b/drivers/rtc/rtc-twl4030.c @@ -337,7 +337,7 @@ static int twl4030_rtc_ioctl(struct device *dev, unsigned int cmd, } #else -#define omap_rtc_ioctl NULL +#define twl4030_rtc_ioctl NULL #endif static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 35364f6..c557ba3 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -720,7 +720,6 @@ static int zfcp_erp_adapter_strategy_generic(struct zfcp_erp_action *act, goto failed_openfcp; atomic_set_mask(ZFCP_STATUS_COMMON_OPEN, &act->adapter->status); - schedule_work(&act->adapter->scan_work); return ZFCP_ERP_SUCCEEDED; @@ -1186,7 +1185,9 @@ static void zfcp_erp_scsi_scan(struct work_struct *work) container_of(work, struct zfcp_erp_add_work, work); struct zfcp_unit *unit = p->unit; struct fc_rport *rport = unit->port->rport; - scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, + + if (rport && rport->port_state == FC_PORTSTATE_ONLINE) + scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0); atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status); zfcp_unit_put(unit); @@ -1282,6 +1283,8 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) case ZFCP_ERP_ACTION_REOPEN_ADAPTER: if (result != ZFCP_ERP_SUCCEEDED) zfcp_erp_rports_del(adapter); + else + schedule_work(&adapter->scan_work); zfcp_adapter_put(adapter); break; } diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 1a7c80a..8aab309 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -50,7 +50,8 @@ static int zfcp_wka_port_get(struct zfcp_wka_port *wka_port) if (mutex_lock_interruptible(&wka_port->mutex)) return -ERESTARTSYS; - if (wka_port->status != ZFCP_WKA_PORT_ONLINE) { + if (wka_port->status == ZFCP_WKA_PORT_OFFLINE || + wka_port->status == ZFCP_WKA_PORT_CLOSING) { wka_port->status = ZFCP_WKA_PORT_OPENING; if (zfcp_fsf_open_wka_port(wka_port)) wka_port->status = ZFCP_WKA_PORT_OFFLINE; @@ -125,8 +126,7 @@ static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range, read_lock_irqsave(&zfcp_data.config_lock, flags); list_for_each_entry(port, &fsf_req->adapter->port_list_head, list) { - /* FIXME: ZFCP_STATUS_PORT_DID_DID check is racy */ - if (!(atomic_read(&port->status) & ZFCP_STATUS_PORT_DID_DID)) + if (!(atomic_read(&port->status) & ZFCP_STATUS_PORT_PHYS_OPEN)) /* Try to connect to unused ports anyway. */ zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, @@ -610,7 +610,6 @@ int zfcp_scan_ports(struct zfcp_adapter *adapter) int ret, i; struct zfcp_gpn_ft *gpn_ft; - zfcp_erp_wait(adapter); /* wait until adapter is finished with ERP */ if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT) return 0; diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index d024442..dc03676 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -930,8 +930,10 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id, goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND, req_flags, adapter->pool.fsf_req_abort); - if (IS_ERR(req)) + if (IS_ERR(req)) { + req = NULL; goto out; + } if (unlikely(!(atomic_read(&unit->status) & ZFCP_STATUS_COMMON_UNBLOCKED))) @@ -1584,6 +1586,7 @@ static void zfcp_fsf_open_wka_port_handler(struct zfcp_fsf_req *req) wka_port->status = ZFCP_WKA_PORT_OFFLINE; break; case FSF_PORT_ALREADY_OPEN: + break; case FSF_GOOD: wka_port->handle = header->port_handle; wka_port->status = ZFCP_WKA_PORT_ONLINE; @@ -2113,18 +2116,21 @@ static inline void zfcp_fsf_trace_latency(struct zfcp_fsf_req *fsf_req) static void zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *req) { - struct scsi_cmnd *scpnt = req->data; + struct scsi_cmnd *scpnt; struct fcp_rsp_iu *fcp_rsp_iu = (struct fcp_rsp_iu *) &(req->qtcb->bottom.io.fcp_rsp); u32 sns_len; char *fcp_rsp_info = (unsigned char *) &fcp_rsp_iu[1]; unsigned long flags; - if (unlikely(!scpnt)) - return; - read_lock_irqsave(&req->adapter->abort_lock, flags); + scpnt = req->data; + if (unlikely(!scpnt)) { + read_unlock_irqrestore(&req->adapter->abort_lock, flags); + return; + } + if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ABORTED)) { set_host_byte(scpnt, DID_SOFT_ERROR); set_driver_byte(scpnt, SUGGEST_RETRY); @@ -2442,8 +2448,10 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_adapter *adapter, goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, adapter->pool.fsf_req_scsi); - if (IS_ERR(req)) + if (IS_ERR(req)) { + req = NULL; goto out; + } req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT; req->data = unit; diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index e46fd3e..468c880 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -88,7 +88,7 @@ static int zfcp_scsi_queuecommand(struct scsi_cmnd *scpnt, ret = zfcp_fsf_send_fcp_command_task(adapter, unit, scpnt, 0, ZFCP_REQ_AUTO_CLEANUP); if (unlikely(ret == -EBUSY)) - zfcp_scsi_command_fail(scpnt, DID_NO_CONNECT); + return SCSI_MLQUEUE_DEVICE_BUSY; else if (unlikely(ret < 0)) return SCSI_MLQUEUE_HOST_BUSY; diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 9aa301c..162cd92 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -427,8 +427,8 @@ static int aac_slave_configure(struct scsi_device *sdev) * Firmware has an individual device recovery time typically * of 35 seconds, give us a margin. */ - if (sdev->timeout < (45 * HZ)) - sdev->timeout = 45 * HZ; + if (sdev->request_queue->rq_timeout < (45 * HZ)) + blk_queue_rq_timeout(sdev->request_queue, 45*HZ); for (cid = 0; cid < aac->maximum_num_containers; ++cid) if (aac->fsa_dev[cid].valid) ++num_lsu; diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 87e09f3..6cad175 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -1442,7 +1442,7 @@ static int ibmvscsi_slave_configure(struct scsi_device *sdev) spin_lock_irqsave(shost->host_lock, lock_flags); if (sdev->type == TYPE_DISK) { sdev->allow_restart = 1; - sdev->timeout = 60 * HZ; + blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); } scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun); spin_unlock_irqrestore(shost->host_lock, lock_flags); diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index a454f94..17ce7ab 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -1016,7 +1016,8 @@ static int megasas_slave_configure(struct scsi_device *sdev) * The RAID firmware may require extended timeouts. */ if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS) - sdev->timeout = MEGASAS_DEFAULT_CMD_TIMEOUT * HZ; + blk_queue_rq_timeout(sdev->request_queue, + MEGASAS_DEFAULT_CMD_TIMEOUT * HZ); return 0; } diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 3863617..edfaf24 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -932,8 +932,7 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) int i, rtn = NEEDS_RETRY; for (i = 0; rtn == NEEDS_RETRY && i < 2; i++) - rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, - scmd->device->timeout, 0); + rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, scmd->device->request_queue->rq_timeout, 0); if (rtn == SUCCESS) return 0; diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index f5d3b96..fa45a1a 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -567,15 +567,18 @@ static inline int scsi_host_is_busy(struct Scsi_Host *shost) */ static void scsi_run_queue(struct request_queue *q) { - struct scsi_device *starved_head = NULL, *sdev = q->queuedata; + struct scsi_device *sdev = q->queuedata; struct Scsi_Host *shost = sdev->host; + LIST_HEAD(starved_list); unsigned long flags; if (scsi_target(sdev)->single_lun) scsi_single_lun_run(sdev); spin_lock_irqsave(shost->host_lock, flags); - while (!list_empty(&shost->starved_list) && !scsi_host_is_busy(shost)) { + list_splice_init(&shost->starved_list, &starved_list); + + while (!list_empty(&starved_list)) { int flagset; /* @@ -588,24 +591,18 @@ static void scsi_run_queue(struct request_queue *q) * scsi_request_fn must get the host_lock before checking * or modifying starved_list or starved_entry. */ - sdev = list_entry(shost->starved_list.next, - struct scsi_device, starved_entry); - /* - * The *queue_ready functions can add a device back onto the - * starved list's tail, so we must check for a infinite loop. - */ - if (sdev == starved_head) + if (scsi_host_is_busy(shost)) break; - if (!starved_head) - starved_head = sdev; + sdev = list_entry(starved_list.next, + struct scsi_device, starved_entry); + list_del_init(&sdev->starved_entry); if (scsi_target_is_busy(scsi_target(sdev))) { list_move_tail(&sdev->starved_entry, &shost->starved_list); continue; } - list_del_init(&sdev->starved_entry); spin_unlock(shost->host_lock); spin_lock(sdev->request_queue->queue_lock); @@ -621,6 +618,8 @@ static void scsi_run_queue(struct request_queue *q) spin_lock(shost->host_lock); } + /* put any unprocessed entries back */ + list_splice(&starved_list, &shost->starved_list); spin_unlock_irqrestore(shost->host_lock, flags); blk_run_queue(q); diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index c9e1242..5081b39 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -757,7 +757,7 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode, * access to the device is prohibited. */ error = scsi_nonblockable_ioctl(sdp, cmd, p, - (mode & FMODE_NDELAY_NOW) != 0); + (mode & FMODE_NDELAY) != 0); if (!scsi_block_when_processing_errors(sdp) || !error) return error; diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 62b6633..45b66b9 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -521,7 +521,7 @@ static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd, * if it doesn't recognise the ioctl */ ret = scsi_nonblockable_ioctl(sdev, cmd, argp, - (mode & FMODE_NDELAY_NOW) != 0); + (mode & FMODE_NDELAY) != 0); if (ret != -ENODEV) return ret; return scsi_ioctl(sdev, cmd, argp); diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c index 3790906..2fa830c 100644 --- a/drivers/scsi/stex.c +++ b/drivers/scsi/stex.c @@ -477,7 +477,7 @@ stex_slave_config(struct scsi_device *sdev) { sdev->use_10_for_rw = 1; sdev->use_10_for_ms = 1; - sdev->timeout = 60 * HZ; + blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); sdev->tagged_supported = 1; return 0; diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index 6dd98f9..ae3699d 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -2149,7 +2149,7 @@ out4: return ret; } -static struct ioc3_submodule ioc3uart_submodule = { +static struct ioc3_submodule ioc3uart_ops = { .name = "IOC3uart", .probe = ioc3uart_probe, .remove = ioc3uart_remove, @@ -2173,7 +2173,7 @@ static int __devinit ioc3uart_init(void) __func__); return ret; } - ret = ioc3_register_submodule(&ioc3uart_submodule); + ret = ioc3_register_submodule(&ioc3uart_ops); if (ret) uart_unregister_driver(&ioc3_uart); return ret; @@ -2181,7 +2181,7 @@ static int __devinit ioc3uart_init(void) static void __devexit ioc3uart_exit(void) { - ioc3_unregister_submodule(&ioc3uart_submodule); + ioc3_unregister_submodule(&ioc3uart_ops); uart_unregister_driver(&ioc3_uart); } diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 6117d3d..28c00c3 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -591,8 +591,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, /* Update the per-port timeout */ uart_update_timeout(port, new->c_cflag, baud); - /* Do our best to flush TX & RX, so we don't loose anything */ - /* But we don't wait indefinitly ! */ + /* Do our best to flush TX & RX, so we don't lose anything */ + /* But we don't wait indefinitely ! */ j = 5000000; /* Maximum wait */ /* FIXME Can't receive chars since set_termios might be called at early * boot for the console, all stuff is not yet ready to receive at that diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c index 317d239..29cbb0a 100644 --- a/drivers/serial/s3c2440.c +++ b/drivers/serial/s3c2440.c @@ -177,5 +177,5 @@ module_exit(s3c2440_serial_exit); MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPLi v2"); +MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:s3c2440-uart"); diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 91697bd..4bbddb7 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -18,6 +18,7 @@ #include <linux/jiffies.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/gpio.h> #include <mach/hardware.h> #include <asm/io.h> @@ -25,7 +26,6 @@ #include <mach/mux.h> #include <mach/irqs.h> -#include <mach/gpio.h> #include <mach/fpga.h> #include <mach/usb.h> @@ -254,8 +254,8 @@ static int ohci_omap_init(struct usb_hcd *hcd) /* gpio9 for overcurrent detction */ omap_cfg_reg(W8_1610_GPIO9); - omap_request_gpio(9); - omap_set_gpio_direction(9, 1 /* IN */); + gpio_request(9, "OHCI overcurrent"); + gpio_direction_input(9); /* for paranoia's sake: disable USB.PUEN */ omap_cfg_reg(W4_USB_HIGHZ); @@ -407,7 +407,7 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) put_device(ohci->transceiver->dev); } if (machine_is_omap_osk()) - omap_free_gpio(9); + gpio_free(9); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 51d7bde..aad1359 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1498,7 +1498,7 @@ static int ftdi_open(struct tty_struct *tty, priv->interface, buf, 0, WDR_TIMEOUT); /* Termios defaults are set by usb_serial_init. We don't change - port->tty->termios - this would loose speed settings, etc. + port->tty->termios - this would lose speed settings, etc. This is same behaviour as serial.c/rs_open() - Kuba */ /* ftdi_set_termios will send usb control messages */ diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/aty/radeon_accel.c index a547e5d..8da5e5a 100644 --- a/drivers/video/aty/radeon_accel.c +++ b/drivers/video/aty/radeon_accel.c @@ -256,7 +256,8 @@ void radeonfb_imageblit(struct fb_info *info, const struct fb_image *image) return; /* We only do 1 bpp color expansion for now */ - if (info->flags & FBINFO_HWACCEL_DISABLED || image->depth != 1) + if (!accel_cexp || + (info->flags & FBINFO_HWACCEL_DISABLED) || image->depth != 1) goto fallback; /* Fallback if running out of the screen. We may do clipping diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index b3ffe82..d5b27f9 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -282,6 +282,8 @@ static int backlight = 1; static int backlight = 0; #endif +int accel_cexp = 0; + /* * prototypes */ @@ -2520,6 +2522,8 @@ static int __init radeonfb_setup (char *options) } else if (!strncmp(this_opt, "ignore_devlist", 14)) { ignore_devlist = 1; #endif + } else if (!strncmp(this_opt, "accel_cexp", 12)) { + accel_cexp = 1; } else mode_option = this_opt; } @@ -2567,6 +2571,8 @@ module_param(monitor_layout, charp, 0); MODULE_PARM_DESC(monitor_layout, "Specify monitor mapping (like XFree86)"); module_param(force_measure_pll, bool, 0); MODULE_PARM_DESC(force_measure_pll, "Force measurement of PLL (debug)"); +module_param(accel_cexp, bool, 0); +MODULE_PARM_DESC(accel_cexp, "Use acceleration engine for color expansion"); #ifdef CONFIG_MTRR module_param(nomtrr, bool, 0); MODULE_PARM_DESC(nomtrr, "bool: disable use of MTRR registers"); diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h index ea0b5b4..974ca6d 100644 --- a/drivers/video/aty/radeonfb.h +++ b/drivers/video/aty/radeonfb.h @@ -638,4 +638,6 @@ static inline void radeonfb_bl_init(struct radeonfb_info *rinfo) {} static inline void radeonfb_bl_exit(struct radeonfb_info *rinfo) {} #endif +extern int accel_cexp; + #endif /* __RADEONFB_H__ */ diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 67ff370..0b2adef 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -3531,12 +3531,18 @@ static void fbcon_exit(void) softback_buf = 0UL; for (i = 0; i < FB_MAX; i++) { + int pending; + mapped = 0; info = registered_fb[i]; if (info == NULL) continue; + pending = cancel_work_sync(&info->queue); + DPRINTK("fbcon: %s pending work\n", (pending ? "canceled" : + "no")); + for (j = first_fb_vc; j <= last_fb_vc; j++) { if (con2fb_map[j] == i) mapped = 1; diff --git a/drivers/video/macfb.c b/drivers/video/macfb.c index b790ddf..ee380d5 100644 --- a/drivers/video/macfb.c +++ b/drivers/video/macfb.c @@ -164,7 +164,6 @@ static struct fb_var_screeninfo macfb_defined = { }; static struct fb_fix_screeninfo macfb_fix = { - .id = "Macintosh ", .type = FB_TYPE_PACKED_PIXELS, .accel = FB_ACCEL_NONE, }; @@ -760,22 +759,22 @@ static int __init macfb_init(void) switch(ndev->dr_hw) { case NUBUS_DRHW_APPLE_MDC: - strcat( macfb_fix.id, "Display Card" ); + strcpy(macfb_fix.id, "Mac Disp. Card"); macfb_setpalette = mdc_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; break; case NUBUS_DRHW_APPLE_TFB: - strcat( macfb_fix.id, "Toby" ); + strcpy(macfb_fix.id, "Toby"); macfb_setpalette = toby_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; break; case NUBUS_DRHW_APPLE_JET: - strcat( macfb_fix.id, "Jet"); + strcpy(macfb_fix.id, "Jet"); macfb_setpalette = jet_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; break; default: - strcat( macfb_fix.id, "Generic NuBus" ); + strcpy(macfb_fix.id, "Generic NuBus"); break; } } @@ -786,21 +785,11 @@ static int __init macfb_init(void) if (!video_is_nubus) switch( mac_bi_data.id ) { - /* These don't have onboard video. Eventually, we may - be able to write separate framebuffer drivers for - them (tobyfb.c, hiresfb.c, etc, etc) */ - case MAC_MODEL_II: - case MAC_MODEL_IIX: - case MAC_MODEL_IICX: - case MAC_MODEL_IIFX: - strcat( macfb_fix.id, "Generic NuBus" ); - break; - /* Valkyrie Quadras */ case MAC_MODEL_Q630: /* I'm not sure about this one */ case MAC_MODEL_P588: - strcat( macfb_fix.id, "Valkyrie built-in" ); + strcpy(macfb_fix.id, "Valkyrie"); macfb_setpalette = valkyrie_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; valkyrie_cmap_regs = ioremap(DAC_BASE, 0x1000); @@ -823,7 +812,7 @@ static int __init macfb_init(void) case MAC_MODEL_Q700: case MAC_MODEL_Q900: case MAC_MODEL_Q950: - strcat( macfb_fix.id, "DAFB built-in" ); + strcpy(macfb_fix.id, "DAFB"); macfb_setpalette = dafb_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; dafb_cmap_regs = ioremap(DAFB_BASE, 0x1000); @@ -831,7 +820,7 @@ static int __init macfb_init(void) /* LC II uses the V8 framebuffer */ case MAC_MODEL_LCII: - strcat( macfb_fix.id, "V8 built-in" ); + strcpy(macfb_fix.id, "V8"); macfb_setpalette = v8_brazil_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); @@ -843,7 +832,7 @@ static int __init macfb_init(void) case MAC_MODEL_IIVI: case MAC_MODEL_IIVX: case MAC_MODEL_P600: - strcat( macfb_fix.id, "Brazil built-in" ); + strcpy(macfb_fix.id, "Brazil"); macfb_setpalette = v8_brazil_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); @@ -860,7 +849,7 @@ static int __init macfb_init(void) case MAC_MODEL_P460: macfb_setpalette = v8_brazil_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "Sonora built-in" ); + strcpy(macfb_fix.id, "Sonora"); v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); break; @@ -871,7 +860,7 @@ static int __init macfb_init(void) case MAC_MODEL_IISI: macfb_setpalette = rbv_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "RBV built-in" ); + strcpy(macfb_fix.id, "RBV"); rbv_cmap_regs = ioremap(DAC_BASE, 0x1000); break; @@ -880,7 +869,7 @@ static int __init macfb_init(void) case MAC_MODEL_C660: macfb_setpalette = civic_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "Civic built-in" ); + strcpy(macfb_fix.id, "Civic"); civic_cmap_regs = ioremap(CIVIC_BASE, 0x1000); break; @@ -901,7 +890,7 @@ static int __init macfb_init(void) v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); } - strcat( macfb_fix.id, "LC built-in" ); + strcpy(macfb_fix.id, "LC"); break; /* We think this may be like the LC II */ case MAC_MODEL_CCL: @@ -911,18 +900,18 @@ static int __init macfb_init(void) v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); } - strcat( macfb_fix.id, "Color Classic built-in" ); + strcpy(macfb_fix.id, "Color Classic"); break; /* And we *do* mean "weirdos" */ case MAC_MODEL_TV: - strcat( macfb_fix.id, "Mac TV built-in" ); + strcpy(macfb_fix.id, "Mac TV"); break; /* These don't have colour, so no need to worry */ case MAC_MODEL_SE30: case MAC_MODEL_CLII: - strcat( macfb_fix.id, "Monochrome built-in" ); + strcpy(macfb_fix.id, "Monochrome"); break; /* Powerbooks are particularly difficult. Many of @@ -935,7 +924,7 @@ static int __init macfb_init(void) case MAC_MODEL_PB140: case MAC_MODEL_PB145: case MAC_MODEL_PB170: - strcat( macfb_fix.id, "DDC built-in" ); + strcpy(macfb_fix.id, "DDC"); break; /* Internal is GSC, External (if present) is ViSC */ @@ -945,13 +934,13 @@ static int __init macfb_init(void) case MAC_MODEL_PB180: case MAC_MODEL_PB210: case MAC_MODEL_PB230: - strcat( macfb_fix.id, "GSC built-in" ); + strcpy(macfb_fix.id, "GSC"); break; /* Internal is TIM, External is ViSC */ case MAC_MODEL_PB165C: case MAC_MODEL_PB180C: - strcat( macfb_fix.id, "TIM built-in" ); + strcpy(macfb_fix.id, "TIM"); break; /* Internal is CSC, External is Keystone+Ariel. */ @@ -963,12 +952,12 @@ static int __init macfb_init(void) case MAC_MODEL_PB280C: macfb_setpalette = csc_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "CSC built-in" ); + strcpy(macfb_fix.id, "CSC"); csc_cmap_regs = ioremap(CSC_BASE, 0x1000); break; default: - strcat( macfb_fix.id, "Unknown/Unsupported built-in" ); + strcpy(macfb_fix.id, "Unknown"); break; } @@ -978,16 +967,23 @@ static int __init macfb_init(void) fb_info.pseudo_palette = pseudo_palette; fb_info.flags = FBINFO_DEFAULT; - fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0); + err = fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0); + if (err) + goto fail_unmap; err = register_framebuffer(&fb_info); - if (!err) - printk("fb%d: %s frame buffer device\n", - fb_info.node, fb_info.fix.id); - else { - iounmap(fb_info.screen_base); - iounmap_macfb(); - } + if (err) + goto fail_dealloc; + + printk("fb%d: %s frame buffer device\n", + fb_info.node, fb_info.fix.id); + return 0; + +fail_dealloc: + fb_dealloc_cmap(&fb_info.cmap); +fail_unmap: + iounmap(fb_info.screen_base); + iounmap_macfb(); return err; } diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c index 38718d9..fb64234 100644 --- a/drivers/video/mb862xx/mb862xxfb.c +++ b/drivers/video/mb862xx/mb862xxfb.c @@ -927,9 +927,9 @@ static int __devinit mb862xx_pci_probe(struct pci_dev *pdev, } dev_dbg(dev, "fb phys 0x%llx 0x%lx\n", - (u64)par->fb_base_phys, (ulong)par->mapped_vram); + (unsigned long long)par->fb_base_phys, (ulong)par->mapped_vram); dev_dbg(dev, "mmio phys 0x%llx 0x%lx\n", - (u64)par->mmio_base_phys, (ulong)par->mmio_len); + (unsigned long long)par->mmio_base_phys, (ulong)par->mmio_len); if (mb862xx_pci_gdc_init(par)) goto io_unmap; diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 5a5e407..1a49519 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -392,7 +392,7 @@ static void set_fb_fix(struct fb_info *fbi) int bpp; rg = &plane->fbdev->mem_desc.region[plane->idx]; - fbi->screen_base = (char __iomem *)rg->vaddr; + fbi->screen_base = rg->vaddr; fix->smem_start = rg->paddr; fix->smem_len = rg->size; diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index a3765e0b..763c1ea 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -40,6 +40,7 @@ #include <linux/bootmem.h> #include <linux/slab.h> #include <asm/desc.h> +#include <asm/cacheflush.h> #define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */ #define CRU_BIOS_SIGNATURE_VALUE 0x55524324 @@ -394,6 +395,8 @@ static void __devinit dmi_find_cru(const struct dmi_header *dm) smbios_cru64_ptr->double_offset; cru_rom_addr = ioremap(cru_physical_address, smbios_cru64_ptr->double_length); + set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK, + smbios_cru64_ptr->double_length >> PAGE_SHIFT); } } } @@ -482,7 +485,7 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, "Management Log for details.\n"); } - return NOTIFY_STOP; + return NOTIFY_OK; } /* diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c index ca344a85..2474ebc 100644 --- a/drivers/watchdog/iTCO_vendor_support.c +++ b/drivers/watchdog/iTCO_vendor_support.c @@ -1,7 +1,7 @@ /* * intel TCO vendor specific watchdog driver support * - * (c) Copyright 2006 Wim Van Sebroeck <wim@iguana.be>. + * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -19,8 +19,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_vendor_support" -#define DRV_VERSION "1.01" -#define DRV_RELDATE "11-Nov-2006" +#define DRV_VERSION "1.02" #define PFX DRV_NAME ": " /* Includes */ @@ -78,24 +77,6 @@ MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (n * 20.6 seconds. */ -static void supermicro_old_pre_start(unsigned long acpibase) -{ - unsigned long val32; - - val32 = inl(SMI_EN); - val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ - outl(val32, SMI_EN); /* Needed to activate watchdog */ -} - -static void supermicro_old_pre_stop(unsigned long acpibase) -{ - unsigned long val32; - - val32 = inl(SMI_EN); - val32 &= 0x00002000; /* Turn on SMI clearing watchdog */ - outl(val32, SMI_EN); /* Needed to deactivate watchdog */ -} - static void supermicro_old_pre_keepalive(unsigned long acpibase) { /* Reload TCO Timer (done in iTCO_wdt_keepalive) + */ @@ -247,18 +228,14 @@ static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat) void iTCO_vendor_pre_start(unsigned long acpibase, unsigned int heartbeat) { - if (vendorsupport == SUPERMICRO_OLD_BOARD) - supermicro_old_pre_start(acpibase); - else if (vendorsupport == SUPERMICRO_NEW_BOARD) + if (vendorsupport == SUPERMICRO_NEW_BOARD) supermicro_new_pre_start(heartbeat); } EXPORT_SYMBOL(iTCO_vendor_pre_start); void iTCO_vendor_pre_stop(unsigned long acpibase) { - if (vendorsupport == SUPERMICRO_OLD_BOARD) - supermicro_old_pre_stop(acpibase); - else if (vendorsupport == SUPERMICRO_NEW_BOARD) + if (vendorsupport == SUPERMICRO_NEW_BOARD) supermicro_new_pre_stop(); } EXPORT_SYMBOL(iTCO_vendor_pre_stop); diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index bfb93bc..5b395a4 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -1,7 +1,7 @@ /* * intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets) * - * (c) Copyright 2006-2007 Wim Van Sebroeck <wim@iguana.be>. + * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -20,34 +20,41 @@ * 82801BAM (ICH2-M) : document number 290687-002, 298242-027, * 82801CA (ICH3-S) : document number 290733-003, 290739-013, * 82801CAM (ICH3-M) : document number 290716-001, 290718-007, - * 82801DB (ICH4) : document number 290744-001, 290745-020, - * 82801DBM (ICH4-M) : document number 252337-001, 252663-005, + * 82801DB (ICH4) : document number 290744-001, 290745-025, + * 82801DBM (ICH4-M) : document number 252337-001, 252663-008, * 82801E (C-ICH) : document number 273599-001, 273645-002, - * 82801EB (ICH5) : document number 252516-001, 252517-003, - * 82801ER (ICH5R) : document number 252516-001, 252517-003, - * 82801FB (ICH6) : document number 301473-002, 301474-007, - * 82801FR (ICH6R) : document number 301473-002, 301474-007, - * 82801FBM (ICH6-M) : document number 301473-002, 301474-007, - * 82801FW (ICH6W) : document number 301473-001, 301474-007, - * 82801FRW (ICH6RW) : document number 301473-001, 301474-007, - * 82801GB (ICH7) : document number 307013-002, 307014-009, - * 82801GR (ICH7R) : document number 307013-002, 307014-009, - * 82801GDH (ICH7DH) : document number 307013-002, 307014-009, - * 82801GBM (ICH7-M) : document number 307013-002, 307014-009, - * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009, - * 82801HB (ICH8) : document number 313056-003, 313057-009, - * 82801HR (ICH8R) : document number 313056-003, 313057-009, - * 82801HBM (ICH8M) : document number 313056-003, 313057-009, - * 82801HH (ICH8DH) : document number 313056-003, 313057-009, - * 82801HO (ICH8DO) : document number 313056-003, 313057-009, - * 82801HEM (ICH8M-E) : document number 313056-003, 313057-009, - * 82801IB (ICH9) : document number 316972-001, 316973-006, - * 82801IR (ICH9R) : document number 316972-001, 316973-006, - * 82801IH (ICH9DH) : document number 316972-001, 316973-006, - * 82801IO (ICH9DO) : document number 316972-001, 316973-006, - * 6300ESB (6300ESB) : document number 300641-003, 300884-010, - * 631xESB (631xESB) : document number 313082-001, 313075-005, - * 632xESB (632xESB) : document number 313082-001, 313075-005 + * 82801EB (ICH5) : document number 252516-001, 252517-028, + * 82801ER (ICH5R) : document number 252516-001, 252517-028, + * 6300ESB (6300ESB) : document number 300641-004, 300884-013, + * 82801FB (ICH6) : document number 301473-002, 301474-026, + * 82801FR (ICH6R) : document number 301473-002, 301474-026, + * 82801FBM (ICH6-M) : document number 301473-002, 301474-026, + * 82801FW (ICH6W) : document number 301473-001, 301474-026, + * 82801FRW (ICH6RW) : document number 301473-001, 301474-026, + * 631xESB (631xESB) : document number 313082-001, 313075-006, + * 632xESB (632xESB) : document number 313082-001, 313075-006, + * 82801GB (ICH7) : document number 307013-003, 307014-024, + * 82801GR (ICH7R) : document number 307013-003, 307014-024, + * 82801GDH (ICH7DH) : document number 307013-003, 307014-024, + * 82801GBM (ICH7-M) : document number 307013-003, 307014-024, + * 82801GHM (ICH7-M DH) : document number 307013-003, 307014-024, + * 82801GU (ICH7-U) : document number 307013-003, 307014-024, + * 82801HB (ICH8) : document number 313056-003, 313057-017, + * 82801HR (ICH8R) : document number 313056-003, 313057-017, + * 82801HBM (ICH8M) : document number 313056-003, 313057-017, + * 82801HH (ICH8DH) : document number 313056-003, 313057-017, + * 82801HO (ICH8DO) : document number 313056-003, 313057-017, + * 82801HEM (ICH8M-E) : document number 313056-003, 313057-017, + * 82801IB (ICH9) : document number 316972-004, 316973-012, + * 82801IR (ICH9R) : document number 316972-004, 316973-012, + * 82801IH (ICH9DH) : document number 316972-004, 316973-012, + * 82801IO (ICH9DO) : document number 316972-004, 316973-012, + * 82801IBM (ICH9M) : document number 316972-004, 316973-012, + * 82801IEM (ICH9M-E) : document number 316972-004, 316973-012, + * 82801JIB (ICH10) : document number 319973-002, 319974-002, + * 82801JIR (ICH10R) : document number 319973-002, 319974-002, + * 82801JD (ICH10D) : document number 319973-002, 319974-002, + * 82801JDO (ICH10DO) : document number 319973-002, 319974-002 */ /* @@ -56,8 +63,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" -#define DRV_VERSION "1.03" -#define DRV_RELDATE "30-Apr-2008" +#define DRV_VERSION "1.04" #define PFX DRV_NAME ": " /* Includes */ @@ -96,19 +102,26 @@ enum iTCO_chipsets { TCO_ICH6, /* ICH6 & ICH6R */ TCO_ICH6M, /* ICH6-M */ TCO_ICH6W, /* ICH6W & ICH6RW */ + TCO_631XESB, /* 631xESB/632xESB */ TCO_ICH7, /* ICH7 & ICH7R */ - TCO_ICH7M, /* ICH7-M */ + TCO_ICH7DH, /* ICH7DH */ + TCO_ICH7M, /* ICH7-M & ICH7-U */ TCO_ICH7MDH, /* ICH7-M DH */ TCO_ICH8, /* ICH8 & ICH8R */ - TCO_ICH8ME, /* ICH8M-E */ TCO_ICH8DH, /* ICH8DH */ TCO_ICH8DO, /* ICH8DO */ TCO_ICH8M, /* ICH8M */ + TCO_ICH8ME, /* ICH8M-E */ TCO_ICH9, /* ICH9 */ TCO_ICH9R, /* ICH9R */ TCO_ICH9DH, /* ICH9DH */ TCO_ICH9DO, /* ICH9DO */ - TCO_631XESB, /* 631xESB/632xESB */ + TCO_ICH9M, /* ICH9M */ + TCO_ICH9ME, /* ICH9M-E */ + TCO_ICH10, /* ICH10 */ + TCO_ICH10R, /* ICH10R */ + TCO_ICH10D, /* ICH10D */ + TCO_ICH10DO, /* ICH10DO */ }; static struct { @@ -129,19 +142,26 @@ static struct { {"ICH6 or ICH6R", 2}, {"ICH6-M", 2}, {"ICH6W or ICH6RW", 2}, + {"631xESB/632xESB", 2}, {"ICH7 or ICH7R", 2}, - {"ICH7-M", 2}, + {"ICH7DH", 2}, + {"ICH7-M or ICH7-U", 2}, {"ICH7-M DH", 2}, {"ICH8 or ICH8R", 2}, - {"ICH8M-E", 2}, {"ICH8DH", 2}, {"ICH8DO", 2}, {"ICH8M", 2}, + {"ICH8M-E", 2}, {"ICH9", 2}, {"ICH9R", 2}, {"ICH9DH", 2}, {"ICH9DO", 2}, - {"631xESB/632xESB", 2}, + {"ICH9M", 2}, + {"ICH9M-E", 2}, + {"ICH10", 2}, + {"ICH10R", 2}, + {"ICH10D", 2}, + {"ICH10DO", 2}, {NULL, 0} }; @@ -175,18 +195,6 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0, TCO_ICH6)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1, TCO_ICH6M)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2, TCO_ICH6W)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M)}, - { ITCO_PCI_DEVICE(0x2918, TCO_ICH9)}, - { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2671, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2672, TCO_631XESB)}, @@ -203,6 +211,25 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { ITCO_PCI_DEVICE(0x267d, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x267e, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x267f, TCO_631XESB)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_30, TCO_ICH7DH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME)}, + { ITCO_PCI_DEVICE(0x2918, TCO_ICH9)}, + { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO)}, + { ITCO_PCI_DEVICE(0x2919, TCO_ICH9M)}, + { ITCO_PCI_DEVICE(0x2917, TCO_ICH9ME)}, + { ITCO_PCI_DEVICE(0x3a18, TCO_ICH10)}, + { ITCO_PCI_DEVICE(0x3a16, TCO_ICH10R)}, + { ITCO_PCI_DEVICE(0x3a1a, TCO_ICH10D)}, + { ITCO_PCI_DEVICE(0x3a14, TCO_ICH10DO)}, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); @@ -311,6 +338,7 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void) static int iTCO_wdt_start(void) { unsigned int val; + unsigned long val32; spin_lock(&iTCO_wdt_private.io_lock); @@ -323,6 +351,18 @@ static int iTCO_wdt_start(void) return -EIO; } + /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ + val32 = inl(SMI_EN); + val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ + outl(val32, SMI_EN); + + /* Force the timer to its reload value by writing to the TCO_RLD + register */ + if (iTCO_wdt_private.iTCO_version == 2) + outw(0x01, TCO_RLD); + else if (iTCO_wdt_private.iTCO_version == 1) + outb(0x01, TCO_RLD); + /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */ val = inw(TCO1_CNT); val &= 0xf7ff; @@ -338,6 +378,7 @@ static int iTCO_wdt_start(void) static int iTCO_wdt_stop(void) { unsigned int val; + unsigned long val32; spin_lock(&iTCO_wdt_private.io_lock); @@ -349,6 +390,11 @@ static int iTCO_wdt_stop(void) outw(val, TCO1_CNT); val = inw(TCO1_CNT); + /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */ + val32 = inl(SMI_EN); + val32 |= 0x00002000; + outl(val32, SMI_EN); + /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ iTCO_wdt_set_NO_REBOOT_bit(); @@ -459,7 +505,6 @@ static int iTCO_wdt_open(struct inode *inode, struct file *file) /* * Reload and activate timer */ - iTCO_wdt_keepalive(); iTCO_wdt_start(); return nonseekable_open(inode, file); } @@ -604,7 +649,6 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, int ret; u32 base_address; unsigned long RCBA; - unsigned long val32; /* * Find the ACPI/PM base I/O address which is the base @@ -644,17 +688,13 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ iTCO_wdt_set_NO_REBOOT_bit(); - /* Set the TCO_EN bit in SMI_EN register */ + /* The TCO logic uses the TCO_EN bit in the SMI_EN register */ if (!request_region(SMI_EN, 4, "iTCO_wdt")) { printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", SMI_EN); ret = -EIO; goto out; } - val32 = inl(SMI_EN); - val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ - outl(val32, SMI_EN); - release_region(SMI_EN, 4); /* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */ @@ -662,7 +702,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", TCOBASE); ret = -EIO; - goto out; + goto unreg_smi_en; } printk(KERN_INFO PFX @@ -672,8 +712,9 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, TCOBASE); /* Clear out the (probably old) status */ - outb(0, TCO1_STS); - outb(3, TCO2_STS); + outb(8, TCO1_STS); /* Clear the Time Out Status bit */ + outb(2, TCO2_STS); /* Clear SECOND_TO_STS bit */ + outb(4, TCO2_STS); /* Clear BOOT_STS bit */ /* Make sure the watchdog is not running */ iTCO_wdt_stop(); @@ -701,6 +742,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, unreg_region: release_region(TCOBASE, 0x20); +unreg_smi_en: + release_region(SMI_EN, 4); out: if (iTCO_wdt_private.iTCO_version == 2) iounmap(iTCO_wdt_private.gcs); @@ -718,6 +761,7 @@ static void __devexit iTCO_wdt_cleanup(void) /* Deregister */ misc_deregister(&iTCO_wdt_miscdev); release_region(TCOBASE, 0x20); + release_region(SMI_EN, 4); if (iTCO_wdt_private.iTCO_version == 2) iounmap(iTCO_wdt_private.gcs); pci_dev_put(iTCO_wdt_private.pdev); @@ -782,8 +826,8 @@ static int __init iTCO_wdt_init_module(void) { int err; - printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s (%s)\n", - DRV_VERSION, DRV_RELDATE); + printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s\n", + DRV_VERSION); err = platform_driver_register(&iTCO_wdt_driver); if (err) diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index b4b7b0a..3acce62 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -98,6 +98,8 @@ static void mtx1_wdt_reset(void) static void mtx1_wdt_start(void) { + unsigned long flags; + spin_lock_irqsave(&mtx1_wdt_device.lock, flags); if (!mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 1; @@ -110,6 +112,8 @@ static void mtx1_wdt_start(void) static int mtx1_wdt_stop(void) { + unsigned long flags; + spin_lock_irqsave(&mtx1_wdt_device.lock, flags); if (mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 0; |