diff options
author | Alan Cox <alan@lxorguk.ukuu.org.uk> | 2008-01-10 22:33:10 (GMT) |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2008-01-23 10:24:16 (GMT) |
commit | defc9cd826e4a99f550504a744f9407b518828ae (patch) | |
tree | 57d863dd941f66e37818e187006915fb99466c28 /drivers | |
parent | c294f1b32940d5bf853e006b9ccc72629c859749 (diff) | |
download | linux-fsl-qoriq-defc9cd826e4a99f550504a744f9407b518828ae.tar.xz |
pata_legacy: resychronize with upstream changes and resubmit
Update the legacy driver so it can handle VLB ports nicely, and has an
internal structure for nailing new ISA/VLB forms in. Anyone got an ALI14xx
and a spare day ;)
Also adds an "all" parameter so you can load this driver after all the PCI
ones in a boot time kernel and tell it to grab anything ST412 compatible
even if it is an unknown PCI device. That allows libata to offer the same
"just get me a disk somehow" fallback that old IDE did.
Obsoletes pata_qdi.
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/ata/pata_legacy.c | 750 |
1 files changed, 605 insertions, 145 deletions
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index c37ba32..c4a939b 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -68,8 +68,9 @@ #define NR_HOST 6 -static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 }; -static int legacy_irq[NR_HOST] = { 14, 15, 11, 10, 8, 12 }; +static int all; +module_param(all, int, 0444); +MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)"); struct legacy_data { unsigned long timing; @@ -80,21 +81,103 @@ struct legacy_data { }; +enum controller { + BIOS = 0, + SNOOP = 1, + PDC20230 = 2, + HT6560A = 3, + HT6560B = 4, + OPTI611A = 5, + OPTI46X = 6, + QDI6500 = 7, + QDI6580 = 8, + QDI6580DP = 9, /* Dual channel mode is different */ + + UNKNOWN = -1 +}; + + +struct legacy_probe { + unsigned char *name; + unsigned long port; + unsigned int irq; + unsigned int slot; + enum controller type; + unsigned long private; +}; + +struct legacy_controller { + const char *name; + struct ata_port_operations *ops; + unsigned int pio_mask; + unsigned int flags; + int (*setup)(struct legacy_probe *probe, struct legacy_data *data); +}; + +static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 }; + +static struct legacy_probe probe_list[NR_HOST]; static struct legacy_data legacy_data[NR_HOST]; static struct ata_host *legacy_host[NR_HOST]; static int nr_legacy_host; -static int probe_all; /* Set to check all ISA port ranges */ -static int ht6560a; /* HT 6560A on primary 1, secondary 2, both 3 */ -static int ht6560b; /* HT 6560A on primary 1, secondary 2, both 3 */ -static int opti82c611a; /* Opti82c611A on primary 1, secondary 2, both 3 */ -static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */ -static int autospeed; /* Chip present which snoops speed changes */ -static int pio_mask = 0x1F; /* PIO range for autospeed devices */ +static int probe_all; /* Set to check all ISA port ranges */ +static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */ +static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */ +static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */ +static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */ +static int qdi; /* Set to probe QDI controllers */ +static int autospeed; /* Chip present which snoops speed changes */ +static int pio_mask = 0x1F; /* PIO range for autospeed devices */ static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */ /** + * legacy_probe_add - Add interface to probe list + * @port: Controller port + * @irq: IRQ number + * @type: Controller type + * @private: Controller specific info + * + * Add an entry into the probe list for ATA controllers. This is used + * to add the default ISA slots and then to build up the table + * further according to other ISA/VLB/Weird device scans + * + * An I/O port list is used to keep ordering stable and sane, as we + * don't have any good way to talk about ordering otherwise + */ + +static int legacy_probe_add(unsigned long port, unsigned int irq, + enum controller type, unsigned long private) +{ + struct legacy_probe *lp = &probe_list[0]; + int i; + struct legacy_probe *free = NULL; + + for (i = 0; i < NR_HOST; i++) { + if (lp->port == 0 && free == NULL) + free = lp; + /* Matching port, or the correct slot for ordering */ + if (lp->port == port || legacy_port[i] == port) { + free = lp; + break; + } + lp++; + } + if (free == NULL) { + printk(KERN_ERR "pata_legacy: Too many interfaces.\n"); + return -1; + } + /* Fill in the entry for later probing */ + free->port = port; + free->irq = irq; + free->type = type; + free->private = private; + return 0; +} + + +/** * legacy_set_mode - mode setting * @link: IDE link * @unused: Device that failed when error is returned @@ -113,7 +196,8 @@ static int legacy_set_mode(struct ata_link *link, struct ata_device **unused) ata_link_for_each_dev(dev, link) { if (ata_dev_enabled(dev)) { - ata_dev_printk(dev, KERN_INFO, "configured for PIO\n"); + ata_dev_printk(dev, KERN_INFO, + "configured for PIO\n"); dev->pio_mode = XFER_PIO_0; dev->xfer_mode = XFER_PIO_0; dev->xfer_shift = ATA_SHIFT_PIO; @@ -171,7 +255,7 @@ static struct ata_port_operations simple_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static struct ata_port_operations legacy_port_ops = { @@ -198,15 +282,16 @@ static struct ata_port_operations legacy_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* * Promise 20230C and 20620 support * - * This controller supports PIO0 to PIO2. We set PIO timings conservatively to - * allow for 50MHz Vesa Local Bus. The 20620 DMA support is weird being DMA to - * controller and PIO'd to the host and not supported. + * This controller supports PIO0 to PIO2. We set PIO timings + * conservatively to allow for 50MHz Vesa Local Bus. The 20620 DMA + * support is weird being DMA to controller and PIO'd to the host + * and not supported. */ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) @@ -221,8 +306,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) local_irq_save(flags); /* Unlock the control interface */ - do - { + do { inb(0x1F5); outb(inb(0x1F2) | 0x80, 0x1F2); inb(0x1F2); @@ -231,7 +315,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) inb(0x1F2); inb(0x1F2); } - while((inb(0x1F2) & 0x80) && --tries); + while ((inb(0x1F2) & 0x80) && --tries); local_irq_restore(flags); @@ -250,7 +334,7 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) } static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, - unsigned char *buf, unsigned int buflen, int rw) + unsigned char *buf, unsigned int buflen, int rw) { if (ata_id_has_dword_io(dev->id)) { struct ata_port *ap = dev->link->ap; @@ -312,14 +396,14 @@ static struct ata_port_operations pdc20230_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* * Holtek 6560A support * - * This controller supports PIO0 to PIO2 (no IORDY even though higher timings - * can be loaded). + * This controller supports PIO0 to PIO2 (no IORDY even though higher + * timings can be loaded). */ static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev) @@ -366,14 +450,14 @@ static struct ata_port_operations ht6560a_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* * Holtek 6560B support * - * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO setting - * unless we see an ATAPI device in which case we force it off. + * This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO + * setting unless we see an ATAPI device in which case we force it off. * * FIXME: need to implement 2nd channel support. */ @@ -400,7 +484,7 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev) if (adev->class != ATA_DEV_ATA) { u8 rconf = inb(0x3E6); if (rconf & 0x24) { - rconf &= ~ 0x24; + rconf &= ~0x24; outb(rconf, 0x3E6); } } @@ -425,13 +509,13 @@ static struct ata_port_operations ht6560b_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */ + .data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */ .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* @@ -464,7 +548,8 @@ static u8 opti_syscfg(u8 reg) * This controller supports PIO0 to PIO3. */ -static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev) +static void opti82c611a_set_piomode(struct ata_port *ap, + struct ata_device *adev) { u8 active, recover, setup; struct ata_timing t; @@ -551,7 +636,7 @@ static struct ata_port_operations opti82c611a_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; /* @@ -683,77 +768,282 @@ static struct ata_port_operations opti82c46x_port_ops = { .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; +static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct legacy_data *qdi = ap->host->private_data; + int active, recovery; + u8 timing; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + if (qdi->fast) { + active = 8 - FIT(t.active, 1, 8); + recovery = 18 - FIT(t.recover, 3, 18); + } else { + active = 9 - FIT(t.active, 2, 9); + recovery = 15 - FIT(t.recover, 0, 15); + } + timing = (recovery << 4) | active | 0x08; + + qdi->clock[adev->devno] = timing; + + outb(timing, qdi->timing); +} /** - * legacy_init_one - attach a legacy interface - * @port: port number - * @io: I/O port start - * @ctrl: control port + * qdi6580dp_set_piomode - PIO setup for dual channel + * @ap: Port + * @adev: Device * @irq: interrupt line * - * Register an ISA bus IDE interface. Such interfaces are PIO and we - * assume do not support IRQ sharing. + * In dual channel mode the 6580 has one clock per channel and we have + * to software clockswitch in qc_issue_prot. */ -static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq) +static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev) { - struct legacy_data *ld = &legacy_data[nr_legacy_host]; - struct ata_host *host; - struct ata_port *ap; - struct platform_device *pdev; - struct ata_port_operations *ops = &legacy_port_ops; - void __iomem *io_addr, *ctrl_addr; - int pio_modes = pio_mask; - u32 mask = (1 << port); - u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY; - int ret; + struct ata_timing t; + struct legacy_data *qdi = ap->host->private_data; + int active, recovery; + u8 timing; - pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0); - if (IS_ERR(pdev)) - return PTR_ERR(pdev); + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + if (qdi->fast) { + active = 8 - FIT(t.active, 1, 8); + recovery = 18 - FIT(t.recover, 3, 18); + } else { + active = 9 - FIT(t.active, 2, 9); + recovery = 15 - FIT(t.recover, 0, 15); + } + timing = (recovery << 4) | active | 0x08; - ret = -EBUSY; - if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL || - devm_request_region(&pdev->dev, ctrl, 1, "pata_legacy") == NULL) - goto fail; + qdi->clock[adev->devno] = timing; - ret = -ENOMEM; - io_addr = devm_ioport_map(&pdev->dev, io, 8); - ctrl_addr = devm_ioport_map(&pdev->dev, ctrl, 1); - if (!io_addr || !ctrl_addr) - goto fail; + outb(timing, qdi->timing + 2 * ap->port_no); + /* Clear the FIFO */ + if (adev->class != ATA_DEV_ATA) + outb(0x5F, qdi->timing + 3); +} - if (ht6560a & mask) { - ops = &ht6560a_port_ops; - pio_modes = 0x07; - iordy = ATA_FLAG_NO_IORDY; - } - if (ht6560b & mask) { - ops = &ht6560b_port_ops; - pio_modes = 0x1F; - } - if (opti82c611a & mask) { - ops = &opti82c611a_port_ops; - pio_modes = 0x0F; +/** + * qdi6580_set_piomode - PIO setup for single channel + * @ap: Port + * @adev: Device + * + * In single channel mode the 6580 has one clock per device and we can + * avoid the requirement to clock switch. We also have to load the timing + * into the right clock according to whether we are master or slave. + */ + +static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_timing t; + struct legacy_data *qdi = ap->host->private_data; + int active, recovery; + u8 timing; + + /* Get the timing data in cycles */ + ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + + if (qdi->fast) { + active = 8 - FIT(t.active, 1, 8); + recovery = 18 - FIT(t.recover, 3, 18); + } else { + active = 9 - FIT(t.active, 2, 9); + recovery = 15 - FIT(t.recover, 0, 15); } - if (opti82c46x & mask) { - ops = &opti82c46x_port_ops; - pio_modes = 0x0F; + timing = (recovery << 4) | active | 0x08; + qdi->clock[adev->devno] = timing; + outb(timing, qdi->timing + 2 * adev->devno); + /* Clear the FIFO */ + if (adev->class != ATA_DEV_ATA) + outb(0x5F, qdi->timing + 3); +} + +/** + * qdi_qc_issue_prot - command issue + * @qc: command pending + * + * Called when the libata layer is about to issue a command. We wrap + * this interface so that we can load the correct ATA timings. + */ + +static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_device *adev = qc->dev; + struct legacy_data *qdi = ap->host->private_data; + + if (qdi->clock[adev->devno] != qdi->last) { + if (adev->pio_mode) { + qdi->last = qdi->clock[adev->devno]; + outb(qdi->clock[adev->devno], qdi->timing + + 2 * ap->port_no); + } } + return ata_qc_issue_prot(qc); +} - /* Probe for automatically detectable controllers */ +/* For the 6580 can we flip the FIFO on/off at this point ? */ - if (io == 0x1F0 && ops == &legacy_port_ops) { - unsigned long flags; +static unsigned int qdi_data_xfer(struct ata_device *adev, unsigned char *buf, + unsigned int buflen, int rw) +{ + struct ata_port *ap = adev->link->ap; + int slop = buflen & 3; - local_irq_save(flags); + if (ata_id_has_dword_io(adev->id)) { + if (rw == WRITE) + iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + else + ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); + if (unlikely(slop)) { + u32 pad; + if (rw == WRITE) { + memcpy(&pad, buf + buflen - slop, slop); + pad = le32_to_cpu(pad); + iowrite32(pad, ap->ioaddr.data_addr); + } else { + pad = ioread32(ap->ioaddr.data_addr); + pad = cpu_to_le32(pad); + memcpy(buf + buflen - slop, &pad, slop); + } + } + return (buflen + 3) & ~3; + } else + return ata_data_xfer(adev, buf, buflen, rw); +} + +static struct ata_port_operations qdi6500_port_ops = { + .set_piomode = qdi6500_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .qc_prep = ata_qc_prep, + .qc_issue = qdi_qc_issue_prot, + + .data_xfer = qdi_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + +static struct ata_port_operations qdi6580_port_ops = { + .set_piomode = qdi6580_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + + .data_xfer = qdi_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + +static struct ata_port_operations qdi6580dp_port_ops = { + .set_piomode = qdi6580dp_set_piomode, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, + + .qc_prep = ata_qc_prep, + .qc_issue = qdi_qc_issue_prot, + + .data_xfer = qdi_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + + .port_start = ata_sff_port_start, +}; + +static struct legacy_controller controllers[] = { + {"BIOS", &legacy_port_ops, 0x1F, + ATA_FLAG_NO_IORDY, NULL }, + {"Snooping", &simple_port_ops, 0x1F, + 0 , NULL }, + {"PDC20230", &pdc20230_port_ops, 0x7, + ATA_FLAG_NO_IORDY, NULL }, + {"HT6560A", &ht6560a_port_ops, 0x07, + ATA_FLAG_NO_IORDY, NULL }, + {"HT6560B", &ht6560b_port_ops, 0x1F, + ATA_FLAG_NO_IORDY, NULL }, + {"OPTI82C611A", &opti82c611a_port_ops, 0x0F, + 0 , NULL }, + {"OPTI82C46X", &opti82c46x_port_ops, 0x0F, + 0 , NULL }, + {"QDI6500", &qdi6500_port_ops, 0x07, + ATA_FLAG_NO_IORDY, NULL }, + {"QDI6580", &qdi6580_port_ops, 0x1F, + 0 , NULL }, + {"QDI6580DP", &qdi6580dp_port_ops, 0x1F, + 0 , NULL } +}; + +/** + * probe_chip_type - Discover controller + * @probe: Probe entry to check + * + * Probe an ATA port and identify the type of controller. We don't + * check if the controller appears to be driveless at this point. + */ + +static int probe_chip_type(struct legacy_probe *probe) +{ + int mask = 1 << probe->slot; + + if (probe->port == 0x1F0) { + unsigned long flags; + local_irq_save(flags); /* Probes */ - inb(0x1F5); outb(inb(0x1F2) | 0x80, 0x1F2); + inb(0x1F5); inb(0x1F2); inb(0x3F6); inb(0x3F6); @@ -762,29 +1052,83 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl if ((inb(0x1F2) & 0x80) == 0) { /* PDC20230c or 20630 ? */ - printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n"); - pio_modes = 0x07; - ops = &pdc20230_port_ops; - iordy = ATA_FLAG_NO_IORDY; + printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller" + " detected.\n"); udelay(100); inb(0x1F5); + local_irq_restore(flags); + return PDC20230; } else { outb(0x55, 0x1F2); inb(0x1F2); inb(0x1F2); - if (inb(0x1F2) == 0x00) { - printk(KERN_INFO "PDC20230-B VLB ATA controller detected.\n"); - } + if (inb(0x1F2) == 0x00) + printk(KERN_INFO "PDC20230-B VLB ATA " + "controller detected.\n"); + local_irq_restore(flags); + return BIOS; } local_irq_restore(flags); } + if (ht6560a & mask) + return HT6560A; + if (ht6560b & mask) + return HT6560B; + if (opti82c611a & mask) + return OPTI611A; + if (opti82c46x & mask) + return OPTI46X; + if (autospeed & mask) + return SNOOP; + return BIOS; +} + + +/** + * legacy_init_one - attach a legacy interface + * @pl: probe record + * + * Register an ISA bus IDE interface. Such interfaces are PIO and we + * assume do not support IRQ sharing. + */ + +static __init int legacy_init_one(struct legacy_probe *probe) +{ + struct legacy_controller *controller = &controllers[probe->type]; + int pio_modes = controller->pio_mask; + unsigned long io = probe->port; + u32 mask = (1 << probe->slot); + struct ata_port_operations *ops = controller->ops; + struct legacy_data *ld = &legacy_data[probe->slot]; + struct ata_host *host = NULL; + struct ata_port *ap; + struct platform_device *pdev; + struct ata_device *dev; + void __iomem *io_addr, *ctrl_addr; + u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY; + int ret; + + iordy |= controller->flags; + + pdev = platform_device_register_simple(DRV_NAME, probe->slot, NULL, 0); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); - /* Chip does mode setting by command snooping */ - if (ops == &legacy_port_ops && (autospeed & mask)) - ops = &simple_port_ops; + ret = -EBUSY; + if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL || + devm_request_region(&pdev->dev, io + 0x0206, 1, + "pata_legacy") == NULL) + goto fail; ret = -ENOMEM; + io_addr = devm_ioport_map(&pdev->dev, io, 8); + ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1); + if (!io_addr || !ctrl_addr) + goto fail; + if (controller->setup) + if (controller->setup(probe, ld) < 0) + goto fail; host = ata_host_alloc(&pdev->dev, 1); if (!host) goto fail; @@ -799,17 +1143,30 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl ata_std_ports(&ap->ioaddr); ap->private_data = ld; - ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, ctrl); + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206); - ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht); + ret = ata_host_activate(host, probe->irq, ata_interrupt, 0, + &legacy_sht); if (ret) goto fail; - - legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev); ld->platform_dev = pdev; - return 0; + /* Nothing found means we drop the port as its probably not there */ + + ret = -ENODEV; + ata_link_for_each_dev(dev, &ap->link) { + if (!ata_dev_absent(dev)) { + legacy_host[probe->slot] = host; + ld->platform_dev = pdev; + return 0; + } + } fail: + if (host) + ata_host_detach(host); + /* FIXME: use devm for this */ + if (ld->timing) + release_region(ld->timing, 2); platform_device_unregister(pdev); return ret; } @@ -820,13 +1177,15 @@ fail: * @master: set this if we find an ATA master * @master: set this if we find an ATA secondary * - * A small number of vendors implemented early PCI ATA interfaces on bridge logic - * without the ATA interface being PCI visible. Where we have a matching PCI driver - * we must skip the relevant device here. If we don't know about it then the legacy - * driver is the right driver anyway. + * A small number of vendors implemented early PCI ATA interfaces + * on bridge logic without the ATA interface being PCI visible. + * Where we have a matching PCI driver we must skip the relevant + * device here. If we don't know about it then the legacy driver + * is the right driver anyway. */ -static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *secondary) +static void legacy_check_special_cases(struct pci_dev *p, int *primary, + int *secondary) { /* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */ if (p->vendor == 0x1078 && p->device == 0x0000) { @@ -842,7 +1201,8 @@ static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *sec if (p->vendor == 0x8086 && p->device == 0x1234) { u16 r; pci_read_config_word(p, 0x6C, &r); - if (r & 0x8000) { /* ATA port enabled */ + if (r & 0x8000) { + /* ATA port enabled */ if (r & 0x4000) *secondary = 1; else @@ -852,6 +1212,117 @@ static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *sec } } +static __init void probe_opti_vlb(void) +{ + /* If an OPTI 82C46X is present find out where the channels are */ + static const char *optis[4] = { + "3/463MV", "5MV", + "5MVA", "5MVB" + }; + u8 chans = 1; + u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6; + + opti82c46x = 3; /* Assume master and slave first */ + printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", + optis[ctrl]); + if (ctrl == 3) + chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1; + ctrl = opti_syscfg(0xAC); + /* Check enabled and this port is the 465MV port. On the + MVB we may have two channels */ + if (ctrl & 8) { + if (chans == 2) { + legacy_probe_add(0x1F0, 14, OPTI46X, 0); + legacy_probe_add(0x170, 15, OPTI46X, 0); + } + if (ctrl & 4) + legacy_probe_add(0x170, 15, OPTI46X, 0); + else + legacy_probe_add(0x1F0, 14, OPTI46X, 0); + } else + legacy_probe_add(0x1F0, 14, OPTI46X, 0); +} + +static __init void qdi65_identify_port(u8 r, u8 res, unsigned long port) +{ + static const unsigned long ide_port[2] = { 0x170, 0x1F0 }; + /* Check card type */ + if ((r & 0xF0) == 0xC0) { + /* QD6500: single channel */ + if (r & 8) { + /* Disabled ? */ + release_region(port, 2); + return; + } + legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01), + QDI6500, port); + } + if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) { + /* QD6580: dual channel */ + if (!request_region(port + 2 , 2, "pata_qdi")) { + release_region(port, 2); + return; + } + res = inb(port + 3); + /* Single channel mode ? */ + if (res & 1) + legacy_probe_add(ide_port[r & 0x01], 14 + (r & 0x01), + QDI6580, port); + else { /* Dual channel mode */ + legacy_probe_add(0x1F0, 14, QDI6580DP, port); + /* port + 0x02, r & 0x04 */ + legacy_probe_add(0x170, 15, QDI6580DP, port + 2); + } + } +} + +static __init void probe_qdi_vlb(void) +{ + unsigned long flags; + static const unsigned long qd_port[2] = { 0x30, 0xB0 }; + int i; + + /* + * Check each possible QD65xx base address + */ + + for (i = 0; i < 2; i++) { + unsigned long port = qd_port[i]; + u8 r, res; + + + if (request_region(port, 2, "pata_qdi")) { + /* Check for a card */ + local_irq_save(flags); + /* I have no h/w that needs this delay but it + is present in the historic code */ + r = inb(port); + udelay(1); + outb(0x19, port); + udelay(1); + res = inb(port); + udelay(1); + outb(r, port); + udelay(1); + local_irq_restore(flags); + + /* Fail */ + if (res == 0x19) { + release_region(port, 2); + continue; + } + /* Passes the presence test */ + r = inb(port + 1); + udelay(1); + /* Check port agrees with port set */ + if ((r & 2) >> 1 != i) { + release_region(port, 2); + continue; + } + qdi65_identify_port(r, res, port); + } + } +} /** * legacy_init - attach legacy interfaces @@ -869,15 +1340,17 @@ static __init int legacy_init(void) int ct = 0; int primary = 0; int secondary = 0; - int last_port = NR_HOST; + int pci_present = 0; + struct legacy_probe *pl = &probe_list[0]; + int slot = 0; struct pci_dev *p = NULL; for_each_pci_dev(p) { int r; - /* Check for any overlap of the system ATA mappings. Native mode controllers - stuck on these addresses or some devices in 'raid' mode won't be found by - the storage class test */ + /* Check for any overlap of the system ATA mappings. Native + mode controllers stuck on these addresses or some devices + in 'raid' mode won't be found by the storage class test */ for (r = 0; r < 6; r++) { if (pci_resource_start(p, r) == 0x1f0) primary = 1; @@ -887,49 +1360,37 @@ static __init int legacy_init(void) /* Check for special cases */ legacy_check_special_cases(p, &primary, &secondary); - /* If PCI bus is present then don't probe for tertiary legacy ports */ - if (probe_all == 0) - last_port = 2; + /* If PCI bus is present then don't probe for tertiary + legacy ports */ + pci_present = 1; } - /* If an OPTI 82C46X is present find out where the channels are */ - if (opti82c46x) { - static const char *optis[4] = { - "3/463MV", "5MV", - "5MVA", "5MVB" - }; - u8 chans = 1; - u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6; - - opti82c46x = 3; /* Assume master and slave first */ - printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", optis[ctrl]); - if (ctrl == 3) - chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1; - ctrl = opti_syscfg(0xAC); - /* Check enabled and this port is the 465MV port. On the - MVB we may have two channels */ - if (ctrl & 8) { - if (ctrl & 4) - opti82c46x = 2; /* Slave */ - else - opti82c46x = 1; /* Master */ - if (chans == 2) - opti82c46x = 3; /* Master and Slave */ - } /* Slave only */ - else if (chans == 1) - opti82c46x = 1; + if (primary == 0 || all) + legacy_probe_add(0x1F0, 14, UNKNOWN, 0); + if (secondary == 0 || all) + legacy_probe_add(0x170, 15, UNKNOWN, 0); + + if (probe_all || !pci_present) { + /* ISA/VLB extra ports */ + legacy_probe_add(0x1E8, 11, UNKNOWN, 0); + legacy_probe_add(0x168, 10, UNKNOWN, 0); + legacy_probe_add(0x1E0, 8, UNKNOWN, 0); + legacy_probe_add(0x160, 12, UNKNOWN, 0); } - for (i = 0; i < last_port; i++) { - /* Skip primary if we have seen a PCI one */ - if (i == 0 && primary == 1) - continue; - /* Skip secondary if we have seen a PCI one */ - if (i == 1 && secondary == 1) + if (opti82c46x) + probe_opti_vlb(); + if (qdi) + probe_qdi_vlb(); + + + for (i = 0; i < NR_HOST; i++, pl++) { + if (pl->port == 0) continue; - if (legacy_init_one(i, legacy_port[i], - legacy_port[i] + 0x0206, - legacy_irq[i]) == 0) + if (pl->type == UNKNOWN) + pl->type = probe_chip_type(pl); + pl->slot = slot++; + if (legacy_init_one(pl) == 0) ct++; } if (ct != 0) @@ -943,7 +1404,6 @@ static __exit void legacy_exit(void) for (i = 0; i < nr_legacy_host; i++) { struct legacy_data *ld = &legacy_data[i]; - ata_host_detach(legacy_host[i]); platform_device_unregister(ld->platform_dev); if (ld->timing) @@ -962,9 +1422,9 @@ module_param(ht6560a, int, 0); module_param(ht6560b, int, 0); module_param(opti82c611a, int, 0); module_param(opti82c46x, int, 0); +module_param(qdi, int, 0); module_param(pio_mask, int, 0); module_param(iordy_mask, int, 0); module_init(legacy_init); module_exit(legacy_exit); - |