diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-02-20 19:03:22 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-02-20 19:03:22 (GMT) |
commit | 3aad3f03b2b6d2d977b985c49274cdb78a1593e5 (patch) | |
tree | e2955fe687fcd9c26f82d57a3c818e05406964ed /include | |
parent | 10b6339e93244156fac901560117e94bf9dca120 (diff) | |
parent | 095c3752e673c0ba039a2f67fd867297fde75ae7 (diff) | |
download | linux-fsl-qoriq-3aad3f03b2b6d2d977b985c49274cdb78a1593e5.tar.xz |
Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux
Pull SPI changes from Grant Likely:
"Changes to both core spi code and spi device drivers. The driver
changes are the usual set of bug fixes and platform enablement.
Core code changes include:
- More intelligent assignment of SPI bus numbers when using DT
- Common mechanism for using gpios as CS lines
- Pull checks for bits_per_word and transfer speed out of drivers and
into core code
- Ensure temporary DMA buffers are DMA safe"
* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux: (50 commits)
spi: Document cs_gpios and cs_gpio in kernel-doc
spi/of: Fix initialization of cs_gpios array
spi/pxa2xx: add support for Lynxpoint SPI controllers
spi/pxa2xx: add support for Intel Low Power Subsystem SPI
spi/pxa2xx: add support for SPI_LOOP
spi/pxa2xx: add support for runtime PM
spi/pxa2xx: add support for DMA engine
spi/pxa2xx: break out the private DMA API usage into a separate file
spi/ath79: add shutdown handler
spi/mips-lantiq: set SPI_MASTER_HALF_DUPLEX flag
spi/mips-lantiq: make use of spi_finalize_current_message
spi/bcm63xx: work around inability to keep CS up
spi/davinci: use request_threaded_irq() to fix deadlock
spi/orion: Use module_platform_driver()
spi/bcm63xx: reject transfers unable to transfer
spi: Ensure memory used for spi_write_then_read() is DMA safe
spi/spi-mpc512x-psc: init mode bits supported by the driver
spi/mpc512x-psc: don't use obsolet cell-index property
spi: Remove erroneous __init, __exit and __exit_p() references in drivers
spi/s3c64xx: fix checkpatch warnings and error
...
Diffstat (limited to 'include')
-rw-r--r-- | include/linux/platform_data/spi-omap2-mcspi.h | 3 | ||||
-rw-r--r-- | include/linux/pxa2xx_ssp.h | 18 | ||||
-rw-r--r-- | include/linux/spi/pxa2xx_spi.h | 108 | ||||
-rw-r--r-- | include/linux/spi/spi.h | 5 | ||||
-rw-r--r-- | include/linux/spi/spi_gpio.h | 4 |
5 files changed, 38 insertions, 100 deletions
diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h index a65572d..c100456 100644 --- a/include/linux/platform_data/spi-omap2-mcspi.h +++ b/include/linux/platform_data/spi-omap2-mcspi.h @@ -22,6 +22,9 @@ struct omap2_mcspi_dev_attr { struct omap2_mcspi_device_config { unsigned turbo_mode:1; + + /* toggle chip select after every word */ + unsigned cs_per_word:1; }; #endif diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index f366320..467cc63 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -155,6 +155,14 @@ #define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ #define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */ +/* LPSS SSP */ +#define SSITF 0x44 /* TX FIFO trigger level */ +#define SSITF_TxLoThresh(x) (((x) - 1) << 8) +#define SSITF_TxHiThresh(x) ((x) - 1) + +#define SSIRF 0x48 /* RX FIFO trigger level */ +#define SSIRF_RxThresh(x) ((x) - 1) + enum pxa_ssp_type { SSP_UNDEFINED = 0, PXA25x_SSP, /* pxa 210, 250, 255, 26x */ @@ -164,6 +172,7 @@ enum pxa_ssp_type { PXA168_SSP, PXA910_SSP, CE4100_SSP, + LPSS_SSP, }; struct ssp_device { @@ -206,6 +215,15 @@ static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg) return __raw_readl(dev->mmio_base + reg); } +#ifdef CONFIG_ARCH_PXA struct ssp_device *pxa_ssp_request(int port, const char *label); void pxa_ssp_free(struct ssp_device *); +#else +static inline struct ssp_device *pxa_ssp_request(int port, const char *label) +{ + return NULL; +} +static inline void pxa_ssp_free(struct ssp_device *ssp) {} +#endif + #endif diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h index c73d144..82d5111 100644 --- a/include/linux/spi/pxa2xx_spi.h +++ b/include/linux/spi/pxa2xx_spi.h @@ -28,6 +28,15 @@ struct pxa2xx_spi_master { u32 clock_enable; u16 num_chipselect; u8 enable_dma; + + /* DMA engine specific config */ + int rx_chan_id; + int tx_chan_id; + int rx_slave_id; + int tx_slave_id; + + /* For non-PXA arches */ + struct ssp_device ssp; }; /* spi_board_info.controller_data for SPI slave devices, @@ -35,6 +44,7 @@ struct pxa2xx_spi_master { */ struct pxa2xx_spi_chip { u8 tx_threshold; + u8 tx_hi_threshold; u8 rx_threshold; u8 dma_burst_size; u32 timeout; @@ -50,103 +60,5 @@ struct pxa2xx_spi_chip { extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info); -#else -/* - * This is the implemtation for CE4100 on x86. ARM defines them in mach/ or - * plat/ include path. - * The CE4100 does not provide DMA support. This bits are here to let the driver - * compile and will never be used. Maybe we get DMA support at a later point in - * time. - */ - -#define DCSR(n) (n) -#define DSADR(n) (n) -#define DTADR(n) (n) -#define DCMD(n) (n) -#define DRCMR(n) (n) - -#define DCSR_RUN (1 << 31) /* Run Bit */ -#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch */ -#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable */ -#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ -#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ -#define DCSR_ENDINTR (1 << 2) /* End Interrupt */ -#define DCSR_STARTINTR (1 << 1) /* Start Interrupt */ -#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt */ - -#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable */ -#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ -#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ -#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ -#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ -#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ -#define DCSR_EORINTR (1 << 9) /* The end of Receive */ - -#define DRCMR_MAPVLD (1 << 7) /* Map Valid */ -#define DRCMR_CHLNUM 0x1f /* mask for Channel Number */ - -#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor */ -#define DDADR_STOP (1 << 0) /* Stop */ - -#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ -#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ -#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ -#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ -#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ -#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ -#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ -#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ -#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ -#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ -#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ -#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ -#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ -#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ - -/* - * Descriptor structure for PXA's DMA engine - * Note: this structure must always be aligned to a 16-byte boundary. - */ - -typedef enum { - DMA_PRIO_HIGH = 0, - DMA_PRIO_MEDIUM = 1, - DMA_PRIO_LOW = 2 -} pxa_dma_prio; - -/* - * DMA registration - */ - -static inline int pxa_request_dma(char *name, - pxa_dma_prio prio, - void (*irq_handler)(int, void *), - void *data) -{ - return -ENODEV; -} - -static inline void pxa_free_dma(int dma_ch) -{ -} - -/* - * The CE4100 does not have the clk framework implemented and SPI clock can - * not be switched on/off or the divider changed. - */ -static inline void clk_disable(struct clk *clk) -{ -} - -static inline int clk_enable(struct clk *clk) -{ - return 0; -} - -static inline unsigned long clk_get_rate(struct clk *clk) -{ - return 3686400; -} - #endif #endif diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index f629189..30e9c50 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -57,6 +57,8 @@ extern struct bus_type spi_bus_type; * @modalias: Name of the driver to use with this device, or an alias * for that name. This appears in the sysfs "modalias" attribute * for driver coldplugging, and in uevents used for hotplugging + * @cs_gpio: gpio number of the chipselect line (optional, -EINVAL when + * when not using a GPIO line) * * A @spi_device is used to interchange data between an SPI slave * (usually a discrete chip) and CPU memory. @@ -258,6 +260,9 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @unprepare_transfer_hardware: there are currently no more messages on the * queue so the subsystem notifies the driver that it may relax the * hardware by issuing this call + * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS + * number. Any individual value may be -EINVAL for CS lines that + * are not GPIOs (driven by the SPI controller itself). * * Each SPI master controller can communicate with one or more @spi_device * children. These make a small bus, sharing MOSI, MISO and SCK signals diff --git a/include/linux/spi/spi_gpio.h b/include/linux/spi/spi_gpio.h index 369b3d7..1634ce3 100644 --- a/include/linux/spi/spi_gpio.h +++ b/include/linux/spi/spi_gpio.h @@ -62,8 +62,8 @@ */ struct spi_gpio_platform_data { unsigned sck; - unsigned mosi; - unsigned miso; + unsigned long mosi; + unsigned long miso; u16 num_chipselect; }; |