diff options
author | Johannes Berg <johannes@sipsolutions.net> | 2008-01-24 18:38:38 (GMT) |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2008-02-29 20:19:32 (GMT) |
commit | 8318d78a44d49ac1edf2bdec7299de3617c4232e (patch) | |
tree | d434634418edd7399737801615d247be06616fdd /net/mac80211/rc80211_pid_algo.c | |
parent | 10b6b80145cc93887dd8aab99bfffa375e9add31 (diff) | |
download | linux-fsl-qoriq-8318d78a44d49ac1edf2bdec7299de3617c4232e.tar.xz |
cfg80211 API for channels/bitrates, mac80211 and driver conversion
This patch creates new cfg80211 wiphy API for channel and bitrate
registration and converts mac80211 and drivers to the new API. The
old mac80211 API is completely ripped out. All drivers (except ath5k)
are updated to the new API, in many cases I expect that optimisations
can be done.
Along with the regulatory code I've also ripped out the
IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be
unnecessary if the hardware simply gives us whatever channels it wants
to support and we then enable/disable them as required, which is pretty
much required for travelling.
Additionally, the patch adds proper "basic" rate handling for STA
mode interface, AP mode interface will have to have new API added
to allow userspace to set the basic rate set, currently it'll be
empty... However, the basic rate handling will need to be moved to
the BSS conf stuff.
I do expect there to be bugs in this, especially wrt. transmit
power handling where I'm basically clueless about how it should work.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'net/mac80211/rc80211_pid_algo.c')
-rw-r--r-- | net/mac80211/rc80211_pid_algo.c | 76 |
1 files changed, 41 insertions, 35 deletions
diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c index c339571..c5a607ca 100644 --- a/net/mac80211/rc80211_pid_algo.c +++ b/net/mac80211/rc80211_pid_algo.c @@ -102,23 +102,23 @@ static void rate_control_pid_adjust_rate(struct ieee80211_local *local, struct rc_pid_rateinfo *rinfo) { struct ieee80211_sub_if_data *sdata; - struct ieee80211_hw_mode *mode; + struct ieee80211_supported_band *sband; int newidx; int maxrate; int back = (adj > 0) ? 1 : -1; sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev); - mode = local->oper_hw_mode; + sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; maxrate = sdata->bss ? sdata->bss->max_ratectrl_rateidx : -1; - newidx = rate_control_pid_shift_adjust(rinfo, adj, sta->txrate, - mode->num_rates); + newidx = rate_control_pid_shift_adjust(rinfo, adj, sta->txrate_idx, + sband->n_bitrates); - while (newidx != sta->txrate) { - if (rate_supported(sta, mode, newidx) && + while (newidx != sta->txrate_idx) { + if (rate_supported(sta, sband->band, newidx) && (maxrate < 0 || newidx <= maxrate)) { - sta->txrate = newidx; + sta->txrate_idx = newidx; break; } @@ -128,7 +128,7 @@ static void rate_control_pid_adjust_rate(struct ieee80211_local *local, #ifdef CONFIG_MAC80211_DEBUGFS rate_control_pid_event_rate_change( &((struct rc_pid_sta_info *)sta->rate_ctrl_priv)->events, - newidx, mode->rates[newidx].rate); + newidx, sband->bitrates[newidx].bitrate); #endif } @@ -155,7 +155,7 @@ static void rate_control_pid_sample(struct rc_pid_info *pinfo, { struct rc_pid_sta_info *spinfo = sta->rate_ctrl_priv; struct rc_pid_rateinfo *rinfo = pinfo->rinfo; - struct ieee80211_hw_mode *mode; + struct ieee80211_supported_band *sband; u32 pf; s32 err_avg; u32 err_prop; @@ -164,7 +164,7 @@ static void rate_control_pid_sample(struct rc_pid_info *pinfo, int adj, i, j, tmp; unsigned long period; - mode = local->oper_hw_mode; + sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; spinfo = sta->rate_ctrl_priv; /* In case nothing happened during the previous control interval, turn @@ -190,18 +190,18 @@ static void rate_control_pid_sample(struct rc_pid_info *pinfo, spinfo->tx_num_failed = 0; /* If we just switched rate, update the rate behaviour info. */ - if (pinfo->oldrate != sta->txrate) { + if (pinfo->oldrate != sta->txrate_idx) { i = rinfo[pinfo->oldrate].rev_index; - j = rinfo[sta->txrate].rev_index; + j = rinfo[sta->txrate_idx].rev_index; tmp = (pf - spinfo->last_pf); tmp = RC_PID_DO_ARITH_RIGHT_SHIFT(tmp, RC_PID_ARITH_SHIFT); rinfo[j].diff = rinfo[i].diff + tmp; - pinfo->oldrate = sta->txrate; + pinfo->oldrate = sta->txrate_idx; } - rate_control_pid_normalize(pinfo, mode->num_rates); + rate_control_pid_normalize(pinfo, sband->n_bitrates); /* Compute the proportional, integral and derivative errors. */ err_prop = (pinfo->target << RC_PID_ARITH_SHIFT) - pf; @@ -242,8 +242,10 @@ static void rate_control_pid_tx_status(void *priv, struct net_device *dev, struct sta_info *sta; struct rc_pid_sta_info *spinfo; unsigned long period; + struct ieee80211_supported_band *sband; sta = sta_info_get(local, hdr->addr1); + sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; if (!sta) return; @@ -251,13 +253,13 @@ static void rate_control_pid_tx_status(void *priv, struct net_device *dev, /* Don't update the state if we're not controlling the rate. */ sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev); if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) { - sta->txrate = sdata->bss->max_ratectrl_rateidx; + sta->txrate_idx = sdata->bss->max_ratectrl_rateidx; return; } /* Ignore all frames that were sent with a different rate than the rate * we currently advise mac80211 to use. */ - if (status->control.rate != &local->oper_hw_mode->rates[sta->txrate]) + if (status->control.tx_rate != &sband->bitrates[sta->txrate_idx]) goto ignore; spinfo = sta->rate_ctrl_priv; @@ -304,7 +306,7 @@ ignore: } static void rate_control_pid_get_rate(void *priv, struct net_device *dev, - struct ieee80211_hw_mode *mode, + struct ieee80211_supported_band *sband, struct sk_buff *skb, struct rate_selection *sel) { @@ -322,7 +324,7 @@ static void rate_control_pid_get_rate(void *priv, struct net_device *dev, fc = le16_to_cpu(hdr->frame_control); if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA || is_multicast_ether_addr(hdr->addr1) || !sta) { - sel->rate = rate_lowest(local, mode, sta); + sel->rate = rate_lowest(local, sband, sta); if (sta) sta_info_put(sta); return; @@ -331,23 +333,23 @@ static void rate_control_pid_get_rate(void *priv, struct net_device *dev, /* If a forced rate is in effect, select it. */ sdata = IEEE80211_DEV_TO_SUB_IF(dev); if (sdata->bss && sdata->bss->force_unicast_rateidx > -1) - sta->txrate = sdata->bss->force_unicast_rateidx; + sta->txrate_idx = sdata->bss->force_unicast_rateidx; - rateidx = sta->txrate; + rateidx = sta->txrate_idx; - if (rateidx >= mode->num_rates) - rateidx = mode->num_rates - 1; + if (rateidx >= sband->n_bitrates) + rateidx = sband->n_bitrates - 1; - sta->last_txrate = rateidx; + sta->last_txrate_idx = rateidx; sta_info_put(sta); - sel->rate = &mode->rates[rateidx]; + sel->rate = &sband->bitrates[rateidx]; #ifdef CONFIG_MAC80211_DEBUGFS rate_control_pid_event_tx_rate( &((struct rc_pid_sta_info *) sta->rate_ctrl_priv)->events, - rateidx, mode->rates[rateidx].rate); + rateidx, sband->bitrates[rateidx].bitrate); #endif } @@ -359,28 +361,32 @@ static void rate_control_pid_rate_init(void *priv, void *priv_sta, * as we need to have IEEE 802.1X auth succeed immediately after assoc.. * Until that method is implemented, we will use the lowest supported * rate as a workaround. */ - sta->txrate = rate_lowest_index(local, local->oper_hw_mode, sta); + struct ieee80211_supported_band *sband; + + sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + sta->txrate_idx = rate_lowest_index(local, sband, sta); } static void *rate_control_pid_alloc(struct ieee80211_local *local) { struct rc_pid_info *pinfo; struct rc_pid_rateinfo *rinfo; - struct ieee80211_hw_mode *mode; + struct ieee80211_supported_band *sband; int i, j, tmp; bool s; #ifdef CONFIG_MAC80211_DEBUGFS struct rc_pid_debugfs_entries *de; #endif + sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + pinfo = kmalloc(sizeof(*pinfo), GFP_ATOMIC); if (!pinfo) return NULL; - /* We can safely assume that oper_hw_mode won't change unless we get + /* We can safely assume that sband won't change unless we get * reinitialized. */ - mode = local->oper_hw_mode; - rinfo = kmalloc(sizeof(*rinfo) * mode->num_rates, GFP_ATOMIC); + rinfo = kmalloc(sizeof(*rinfo) * sband->n_bitrates, GFP_ATOMIC); if (!rinfo) { kfree(pinfo); return NULL; @@ -389,7 +395,7 @@ static void *rate_control_pid_alloc(struct ieee80211_local *local) /* Sort the rates. This is optimized for the most common case (i.e. * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed * mapping too. */ - for (i = 0; i < mode->num_rates; i++) { + for (i = 0; i < sband->n_bitrates; i++) { rinfo[i].index = i; rinfo[i].rev_index = i; if (pinfo->fast_start) @@ -397,11 +403,11 @@ static void *rate_control_pid_alloc(struct ieee80211_local *local) else rinfo[i].diff = i * pinfo->norm_offset; } - for (i = 1; i < mode->num_rates; i++) { + for (i = 1; i < sband->n_bitrates; i++) { s = 0; - for (j = 0; j < mode->num_rates - i; j++) - if (unlikely(mode->rates[rinfo[j].index].rate > - mode->rates[rinfo[j + 1].index].rate)) { + for (j = 0; j < sband->n_bitrates - i; j++) + if (unlikely(sband->bitrates[rinfo[j].index].bitrate > + sband->bitrates[rinfo[j + 1].index].bitrate)) { tmp = rinfo[j].index; rinfo[j].index = rinfo[j + 1].index; rinfo[j + 1].index = tmp; |