summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/edac/i5100_edac.c87
1 files changed, 87 insertions, 0 deletions
diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c
index 33c5c8e..0a0345b 100644
--- a/drivers/edac/i5100_edac.c
+++ b/drivers/edac/i5100_edac.c
@@ -68,6 +68,14 @@
I5100_FERR_NF_MEM_M1ERR_MASK)
#define I5100_NERR_NF_MEM 0xa4 /* MC Next Non-Fatal Errors */
#define I5100_EMASK_MEM 0xa8 /* MC Error Mask Register */
+#define I5100_MEM0EINJMSK0 0x200 /* Injection Mask0 Register Channel 0 */
+#define I5100_MEM1EINJMSK0 0x208 /* Injection Mask0 Register Channel 1 */
+#define I5100_MEMXEINJMSK0_EINJEN (1 << 27)
+#define I5100_MEM0EINJMSK1 0x204 /* Injection Mask1 Register Channel 0 */
+#define I5100_MEM1EINJMSK1 0x206 /* Injection Mask1 Register Channel 1 */
+
+/* Device 19, Function 0 */
+#define I5100_DINJ0 0x9a
/* device 21 and 22, func 0 */
#define I5100_MTR_0 0x154 /* Memory Technology Registers 0-3 */
@@ -344,6 +352,14 @@ struct i5100_priv {
struct delayed_work i5100_scrubbing;
int scrub_enable;
+
+ /* Error injection */
+ u8 inject_channel;
+ u8 inject_hlinesel;
+ u8 inject_deviceptr1;
+ u8 inject_deviceptr2;
+ u16 inject_eccmask1;
+ u16 inject_eccmask2;
};
/* map a rank/chan to a slot number on the mainboard */
@@ -864,6 +880,70 @@ static void i5100_init_csrows(struct mem_ctl_info *mci)
}
}
+/****************************************************************************
+ * Error injection routines
+ ****************************************************************************/
+
+static void i5100_do_inject(struct mem_ctl_info *mci)
+{
+ struct i5100_priv *priv = mci->pvt_info;
+ u32 mask0;
+ u16 mask1;
+
+ /* MEM[1:0]EINJMSK0
+ * 31 - ADDRMATCHEN
+ * 29:28 - HLINESEL
+ * 00 Reserved
+ * 01 Lower half of cache line
+ * 10 Upper half of cache line
+ * 11 Both upper and lower parts of cache line
+ * 27 - EINJEN
+ * 25:19 - XORMASK1 for deviceptr1
+ * 9:5 - SEC2RAM for deviceptr2
+ * 4:0 - FIR2RAM for deviceptr1
+ */
+ mask0 = ((priv->inject_hlinesel & 0x3) << 28) |
+ I5100_MEMXEINJMSK0_EINJEN |
+ ((priv->inject_eccmask1 & 0xffff) << 10) |
+ ((priv->inject_deviceptr2 & 0x1f) << 5) |
+ (priv->inject_deviceptr1 & 0x1f);
+
+ /* MEM[1:0]EINJMSK1
+ * 15:0 - XORMASK2 for deviceptr2
+ */
+ mask1 = priv->inject_eccmask2;
+
+ if (priv->inject_channel == 0) {
+ pci_write_config_dword(priv->mc, I5100_MEM0EINJMSK0, mask0);
+ pci_write_config_word(priv->mc, I5100_MEM0EINJMSK1, mask1);
+ } else {
+ pci_write_config_dword(priv->mc, I5100_MEM1EINJMSK0, mask0);
+ pci_write_config_word(priv->mc, I5100_MEM1EINJMSK1, mask1);
+ }
+
+ /* Error Injection Response Function
+ * Intel 5100 Memory Controller Hub Chipset (318378) datasheet
+ * hints about this register but carry no data about them. All
+ * data regarding device 19 is based on experimentation and the
+ * Intel 7300 Chipset Memory Controller Hub (318082) datasheet
+ * which appears to be accurate for the i5100 in this area.
+ *
+ * The injection code don't work without setting this register.
+ * The register needs to be flipped off then on else the hardware
+ * will only preform the first injection.
+ *
+ * Stop condition bits 7:4
+ * 1010 - Stop after one injection
+ * 1011 - Never stop injecting faults
+ *
+ * Start condition bits 3:0
+ * 1010 - Never start
+ * 1011 - Start immediately
+ */
+ pci_write_config_byte(priv->einj, I5100_DINJ0, 0xaa);
+ pci_write_config_byte(priv->einj, I5100_DINJ0, 0xab);
+}
+
static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
int rc;
@@ -993,6 +1073,13 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
mci->set_sdram_scrub_rate = i5100_set_scrub_rate;
mci->get_sdram_scrub_rate = i5100_get_scrub_rate;
+ priv->inject_channel = 0;
+ priv->inject_hlinesel = 0;
+ priv->inject_deviceptr1 = 0;
+ priv->inject_deviceptr2 = 0;
+ priv->inject_eccmask1 = 0;
+ priv->inject_eccmask2 = 0;
+
i5100_init_csrows(mci);
/* this strange construction seems to be in every driver, dunno why */