diff options
-rw-r--r-- | drivers/hwmon/nct6775.c | 281 |
1 files changed, 207 insertions, 74 deletions
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index 6386d1b..3a9bb66 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -37,6 +37,7 @@ * nct6775f 9 4 3 6+3 0xb470 0xc1 0x5ca3 * nct6776f 9 5 3 6+3 0xc330 0xc1 0x5ca3 * nct6779d 15 5 5 2+6 0xc560 0xc1 0x5ca3 + * nct6791d 15 6 6 2+6 0xc800 0xc1 0x5ca3 * * #temp lists the number of monitored temperature sources (first value) plus * the number of directly connectable temperature sensors (second value). @@ -60,7 +61,7 @@ #define USE_ALTERNATE -enum kinds { nct6106, nct6775, nct6776, nct6779 }; +enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791 }; /* used to set data->name = nct6775_device_names[data->sio_kind] */ static const char * const nct6775_device_names[] = { @@ -68,6 +69,7 @@ static const char * const nct6775_device_names[] = { "nct6775", "nct6776", "nct6779", + "nct6791", }; static unsigned short force_id; @@ -97,6 +99,7 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal"); #define SIO_NCT6775_ID 0xb470 #define SIO_NCT6776_ID 0xc330 #define SIO_NCT6779_ID 0xc560 +#define SIO_NCT6791_ID 0xc800 #define SIO_ID_MASK 0xFFF0 enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 }; @@ -173,6 +176,8 @@ superio_exit(int ioreg) #define NUM_REG_ALARM 7 /* Max number of alarm registers */ #define NUM_REG_BEEP 5 /* Max number of beep registers */ +#define NUM_FAN 6 + /* Common and NCT6775 specific data */ /* Voltage min/max registers for nr=7..14 are in bank 5 */ @@ -239,28 +244,32 @@ static const u8 NCT6775_PWM_MODE_MASK[] = { 0x01, 0x02, 0x01 }; /* Advanced Fan control, some values are common for all fans */ -static const u16 NCT6775_REG_TARGET[] = { 0x101, 0x201, 0x301, 0x801, 0x901 }; -static const u16 NCT6775_REG_FAN_MODE[] = { 0x102, 0x202, 0x302, 0x802, 0x902 }; +static const u16 NCT6775_REG_TARGET[] = { + 0x101, 0x201, 0x301, 0x801, 0x901, 0xa01 }; +static const u16 NCT6775_REG_FAN_MODE[] = { + 0x102, 0x202, 0x302, 0x802, 0x902, 0xa02 }; static const u16 NCT6775_REG_FAN_STEP_DOWN_TIME[] = { - 0x103, 0x203, 0x303, 0x803, 0x903 }; + 0x103, 0x203, 0x303, 0x803, 0x903, 0xa03 }; static const u16 NCT6775_REG_FAN_STEP_UP_TIME[] = { - 0x104, 0x204, 0x304, 0x804, 0x904 }; + 0x104, 0x204, 0x304, 0x804, 0x904, 0xa04 }; static const u16 NCT6775_REG_FAN_STOP_OUTPUT[] = { - 0x105, 0x205, 0x305, 0x805, 0x905 }; -static const u16 NCT6775_REG_FAN_START_OUTPUT[] - = { 0x106, 0x206, 0x306, 0x806, 0x906 }; + 0x105, 0x205, 0x305, 0x805, 0x905, 0xa05 }; +static const u16 NCT6775_REG_FAN_START_OUTPUT[] = { + 0x106, 0x206, 0x306, 0x806, 0x906, 0xa06 }; static const u16 NCT6775_REG_FAN_MAX_OUTPUT[] = { 0x10a, 0x20a, 0x30a }; static const u16 NCT6775_REG_FAN_STEP_OUTPUT[] = { 0x10b, 0x20b, 0x30b }; static const u16 NCT6775_REG_FAN_STOP_TIME[] = { - 0x107, 0x207, 0x307, 0x807, 0x907 }; -static const u16 NCT6775_REG_PWM[] = { 0x109, 0x209, 0x309, 0x809, 0x909 }; -static const u16 NCT6775_REG_PWM_READ[] = { 0x01, 0x03, 0x11, 0x13, 0x15 }; + 0x107, 0x207, 0x307, 0x807, 0x907, 0xa07 }; +static const u16 NCT6775_REG_PWM[] = { + 0x109, 0x209, 0x309, 0x809, 0x909, 0xa09 }; +static const u16 NCT6775_REG_PWM_READ[] = { + 0x01, 0x03, 0x11, 0x13, 0x15, 0xa09 }; static const u16 NCT6775_REG_FAN[] = { 0x630, 0x632, 0x634, 0x636, 0x638 }; static const u16 NCT6775_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d }; static const u16 NCT6775_REG_FAN_PULSES[] = { 0x641, 0x642, 0x643, 0x644, 0 }; -static const u16 NCT6775_FAN_PULSE_SHIFT[] = { 0, 0, 0, 0, 0 }; +static const u16 NCT6775_FAN_PULSE_SHIFT[] = { 0, 0, 0, 0, 0, 0 }; static const u16 NCT6775_REG_TEMP[] = { 0x27, 0x150, 0x250, 0x62b, 0x62c, 0x62d }; @@ -276,25 +285,25 @@ static const u16 NCT6775_REG_TEMP_SOURCE[ARRAY_SIZE(NCT6775_REG_TEMP)] = { 0x621, 0x622, 0x623, 0x624, 0x625, 0x626 }; static const u16 NCT6775_REG_TEMP_SEL[] = { - 0x100, 0x200, 0x300, 0x800, 0x900 }; + 0x100, 0x200, 0x300, 0x800, 0x900, 0xa00 }; static const u16 NCT6775_REG_WEIGHT_TEMP_SEL[] = { - 0x139, 0x239, 0x339, 0x839, 0x939 }; + 0x139, 0x239, 0x339, 0x839, 0x939, 0xa39 }; static const u16 NCT6775_REG_WEIGHT_TEMP_STEP[] = { - 0x13a, 0x23a, 0x33a, 0x83a, 0x93a }; + 0x13a, 0x23a, 0x33a, 0x83a, 0x93a, 0xa3a }; static const u16 NCT6775_REG_WEIGHT_TEMP_STEP_TOL[] = { - 0x13b, 0x23b, 0x33b, 0x83b, 0x93b }; + 0x13b, 0x23b, 0x33b, 0x83b, 0x93b, 0xa3b }; static const u16 NCT6775_REG_WEIGHT_DUTY_STEP[] = { - 0x13c, 0x23c, 0x33c, 0x83c, 0x93c }; + 0x13c, 0x23c, 0x33c, 0x83c, 0x93c, 0xa3c }; static const u16 NCT6775_REG_WEIGHT_TEMP_BASE[] = { - 0x13d, 0x23d, 0x33d, 0x83d, 0x93d }; + 0x13d, 0x23d, 0x33d, 0x83d, 0x93d, 0xa3d }; static const u16 NCT6775_REG_TEMP_OFFSET[] = { 0x454, 0x455, 0x456 }; static const u16 NCT6775_REG_AUTO_TEMP[] = { - 0x121, 0x221, 0x321, 0x821, 0x921 }; + 0x121, 0x221, 0x321, 0x821, 0x921, 0xa21 }; static const u16 NCT6775_REG_AUTO_PWM[] = { - 0x127, 0x227, 0x327, 0x827, 0x927 }; + 0x127, 0x227, 0x327, 0x827, 0x927, 0xa27 }; #define NCT6775_AUTO_TEMP(data, nr, p) ((data)->REG_AUTO_TEMP[nr] + (p)) #define NCT6775_AUTO_PWM(data, nr, p) ((data)->REG_AUTO_PWM[nr] + (p)) @@ -302,9 +311,9 @@ static const u16 NCT6775_REG_AUTO_PWM[] = { static const u16 NCT6775_REG_CRITICAL_ENAB[] = { 0x134, 0x234, 0x334 }; static const u16 NCT6775_REG_CRITICAL_TEMP[] = { - 0x135, 0x235, 0x335, 0x835, 0x935 }; + 0x135, 0x235, 0x335, 0x835, 0x935, 0xa35 }; static const u16 NCT6775_REG_CRITICAL_TEMP_TOLERANCE[] = { - 0x138, 0x238, 0x338, 0x838, 0x938 }; + 0x138, 0x238, 0x338, 0x838, 0x938, 0xa38 }; static const char *const nct6775_temp_label[] = { "", @@ -360,16 +369,16 @@ static const s8 NCT6776_BEEP_BITS[] = { 30, 31 }; /* intrusion0, intrusion1 */ static const u16 NCT6776_REG_TOLERANCE_H[] = { - 0x10c, 0x20c, 0x30c, 0x80c, 0x90c }; + 0x10c, 0x20c, 0x30c, 0x80c, 0x90c, 0xa0c }; -static const u8 NCT6776_REG_PWM_MODE[] = { 0x04, 0, 0 }; -static const u8 NCT6776_PWM_MODE_MASK[] = { 0x01, 0, 0 }; +static const u8 NCT6776_REG_PWM_MODE[] = { 0x04, 0, 0, 0, 0, 0 }; +static const u8 NCT6776_PWM_MODE_MASK[] = { 0x01, 0, 0, 0, 0, 0 }; static const u16 NCT6776_REG_FAN_MIN[] = { 0x63a, 0x63c, 0x63e, 0x640, 0x642 }; static const u16 NCT6776_REG_FAN_PULSES[] = { 0x644, 0x645, 0x646, 0, 0 }; static const u16 NCT6776_REG_WEIGHT_DUTY_BASE[] = { - 0x13e, 0x23e, 0x33e, 0x83e, 0x93e }; + 0x13e, 0x23e, 0x33e, 0x83e, 0x93e, 0xa3e }; static const u16 NCT6776_REG_TEMP_CONFIG[ARRAY_SIZE(NCT6775_REG_TEMP)] = { 0x18, 0x152, 0x252, 0x628, 0x629, 0x62A }; @@ -433,15 +442,16 @@ static const s8 NCT6779_BEEP_BITS[] = { 16, 17, -1, -1, -1, -1, /* temp1..temp6 */ 30, 31 }; /* intrusion0, intrusion1 */ -static const u16 NCT6779_REG_FAN[] = { 0x4b0, 0x4b2, 0x4b4, 0x4b6, 0x4b8 }; +static const u16 NCT6779_REG_FAN[] = { + 0x4b0, 0x4b2, 0x4b4, 0x4b6, 0x4b8, 0x4ba }; static const u16 NCT6779_REG_FAN_PULSES[] = { - 0x644, 0x645, 0x646, 0x647, 0x648 }; + 0x644, 0x645, 0x646, 0x647, 0x648, 0x649 }; static const u16 NCT6779_REG_CRITICAL_PWM_ENABLE[] = { - 0x136, 0x236, 0x336, 0x836, 0x936 }; + 0x136, 0x236, 0x336, 0x836, 0x936, 0xa36 }; #define NCT6779_CRITICAL_PWM_ENABLE_MASK 0x01 static const u16 NCT6779_REG_CRITICAL_PWM[] = { - 0x137, 0x237, 0x337, 0x837, 0x937 }; + 0x137, 0x237, 0x337, 0x837, 0x937, 0xa37 }; static const u16 NCT6779_REG_TEMP[] = { 0x27, 0x150 }; static const u16 NCT6779_REG_TEMP_CONFIG[ARRAY_SIZE(NCT6779_REG_TEMP)] = { @@ -493,6 +503,23 @@ static const u16 NCT6779_REG_TEMP_ALTERNATE[ARRAY_SIZE(nct6779_temp_label) - 1] static const u16 NCT6779_REG_TEMP_CRIT[ARRAY_SIZE(nct6779_temp_label) - 1] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x709, 0x70a }; +/* NCT6791 specific data */ + +#define NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE 0x28 + +static const u16 NCT6791_REG_ALARM[NUM_REG_ALARM] = { + 0x459, 0x45A, 0x45B, 0x568, 0x45D }; + +static const s8 NCT6791_ALARM_BITS[] = { + 0, 1, 2, 3, 8, 21, 20, 16, /* in0.. in7 */ + 17, 24, 25, 26, 27, 28, 29, /* in8..in14 */ + -1, /* unused */ + 6, 7, 11, 10, 23, 33, /* fan1..fan6 */ + -1, -1, /* unused */ + 4, 5, 13, -1, -1, -1, /* temp1..temp6 */ + 12, 9 }; /* intrusion0, intrusion1 */ + + /* NCT6102D/NCT6106D specific data */ #define NCT6106_REG_VBAT 0x318 @@ -771,10 +798,10 @@ struct nct6775_data { u8 bank; /* current register bank */ u8 in_num; /* number of in inputs we have */ u8 in[15][3]; /* [0]=in, [1]=in_max, [2]=in_min */ - unsigned int rpm[5]; - u16 fan_min[5]; - u8 fan_pulses[5]; - u8 fan_div[5]; + unsigned int rpm[NUM_FAN]; + u16 fan_min[NUM_FAN]; + u8 fan_pulses[NUM_FAN]; + u8 fan_div[NUM_FAN]; u8 has_pwm; u8 has_fan; /* some fan inputs can be disabled */ u8 has_fan_min; /* some fans don't have min register */ @@ -791,8 +818,10 @@ struct nct6775_data { u64 beeps; u8 pwm_num; /* number of pwm */ - u8 pwm_mode[5]; /* 1->DC variable voltage, 0->PWM variable duty cycle */ - enum pwm_enable pwm_enable[5]; + u8 pwm_mode[NUM_FAN]; /* 1->DC variable voltage, + * 0->PWM variable duty cycle + */ + enum pwm_enable pwm_enable[NUM_FAN]; /* 0->off * 1->manual * 2->thermal cruise mode (also called SmartFan I) @@ -800,31 +829,31 @@ struct nct6775_data { * 4->SmartFan III * 5->enhanced variable thermal cruise (SmartFan IV) */ - u8 pwm[7][5]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor, - * [3]=pwm_max, [4]=pwm_step, - * [5]=weight_duty_step, [6]=weight_duty_base - */ + u8 pwm[7][NUM_FAN]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor, + * [3]=pwm_max, [4]=pwm_step, + * [5]=weight_duty_step, [6]=weight_duty_base + */ - u8 target_temp[5]; + u8 target_temp[NUM_FAN]; u8 target_temp_mask; - u32 target_speed[5]; - u32 target_speed_tolerance[5]; + u32 target_speed[NUM_FAN]; + u32 target_speed_tolerance[NUM_FAN]; u8 speed_tolerance_limit; - u8 temp_tolerance[2][5]; + u8 temp_tolerance[2][NUM_FAN]; u8 tolerance_mask; - u8 fan_time[3][5]; /* 0 = stop_time, 1 = step_up, 2 = step_down */ + u8 fan_time[3][NUM_FAN]; /* 0 = stop_time, 1 = step_up, 2 = step_down */ /* Automatic fan speed control registers */ int auto_pwm_num; - u8 auto_pwm[5][7]; - u8 auto_temp[5][7]; - u8 pwm_temp_sel[5]; - u8 pwm_weight_temp_sel[5]; - u8 weight_temp[3][5]; /* 0->temp_step, 1->temp_step_tol, - * 2->temp_base - */ + u8 auto_pwm[NUM_FAN][7]; + u8 auto_temp[NUM_FAN][7]; + u8 pwm_temp_sel[NUM_FAN]; + u8 pwm_weight_temp_sel[NUM_FAN]; + u8 weight_temp[3][NUM_FAN]; /* 0->temp_step, 1->temp_step_tol, + * 2->temp_base + */ u8 vid; u8 vrm; @@ -1009,8 +1038,9 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg) ((reg & 0xfff0) == 0x650 && (reg & 0x000f) >= 0x06) || reg == 0x73 || reg == 0x75 || reg == 0x77; case nct6779: + case nct6791: return reg == 0x150 || reg == 0x153 || reg == 0x155 || - ((reg & 0xfff0) == 0x4b0 && (reg & 0x000f) < 0x09) || + ((reg & 0xfff0) == 0x4b0 && (reg & 0x000f) < 0x0b) || reg == 0x402 || reg == 0x63a || reg == 0x63c || reg == 0x63e || reg == 0x640 || reg == 0x642 || @@ -1353,6 +1383,7 @@ static void nct6775_update_pwm_limits(struct device *dev) break; case nct6106: case nct6779: + case nct6791: reg = nct6775_read_value(data, data->REG_CRITICAL_PWM_ENABLE[i]); if (reg & data->CRITICAL_PWM_ENABLE_MASK) @@ -2760,6 +2791,7 @@ store_auto_pwm(struct device *dev, struct device_attribute *attr, break; /* always enabled, nothing to do */ case nct6106: case nct6779: + case nct6791: nct6775_write_value(data, data->REG_CRITICAL_PWM[nr], val); reg = nct6775_read_value(data, @@ -3135,23 +3167,24 @@ nct6775_check_fan_inputs(const struct nct6775_sio_data *sio_data, struct nct6775_data *data) { int regval; - bool fan3pin, fan3min, fan4pin, fan4min, fan5pin; - bool pwm3pin, pwm4pin, pwm5pin; + bool fan3pin, fan4pin, fan4min, fan5pin, fan6pin; + bool pwm3pin, pwm4pin, pwm5pin, pwm6pin; /* fan4 and fan5 share some pins with the GPIO and serial flash */ if (data->kind == nct6775) { regval = superio_inb(sio_data->sioreg, 0x2c); fan3pin = regval & (1 << 6); - fan3min = fan3pin; pwm3pin = regval & (1 << 7); /* On NCT6775, fan4 shares pins with the fdc interface */ fan4pin = !(superio_inb(sio_data->sioreg, 0x2A) & 0x80); - fan4min = 0; - fan5pin = 0; - pwm4pin = 0; - pwm5pin = 0; + fan4min = false; + fan5pin = false; + fan6pin = false; + pwm4pin = false; + pwm5pin = false; + pwm6pin = false; } else if (data->kind == nct6776) { bool gpok = superio_inb(sio_data->sioreg, 0x27) & 0x80; @@ -3174,22 +3207,24 @@ nct6775_check_fan_inputs(const struct nct6775_sio_data *sio_data, fan5pin = superio_inb(sio_data->sioreg, 0x1C) & 0x02; fan4min = fan4pin; - fan3min = fan3pin; + fan6pin = false; pwm3pin = fan3pin; - pwm4pin = 0; - pwm5pin = 0; + pwm4pin = false; + pwm5pin = false; + pwm6pin = false; } else if (data->kind == nct6106) { regval = superio_inb(sio_data->sioreg, 0x24); fan3pin = !(regval & 0x80); pwm3pin = regval & 0x08; - fan3min = fan3pin; fan4pin = false; fan4min = false; fan5pin = false; + fan6pin = false; pwm4pin = false; pwm5pin = false; - } else { /* NCT6779D */ + pwm6pin = false; + } else { /* NCT6779D or NCT6791D */ regval = superio_inb(sio_data->sioreg, 0x1c); fan3pin = !(regval & (1 << 5)); @@ -3200,18 +3235,25 @@ nct6775_check_fan_inputs(const struct nct6775_sio_data *sio_data, pwm4pin = !(regval & (1 << 1)); pwm5pin = !(regval & (1 << 2)); - fan3min = fan3pin; fan4min = fan4pin; - } - - data->has_fan = data->has_fan_min = 0x03; /* fan1 and fan2 */ - data->has_fan |= fan3pin << 2; - data->has_fan_min |= fan3min << 2; - data->has_fan |= (fan4pin << 3) | (fan5pin << 4); - data->has_fan_min |= (fan4min << 3) | (fan5pin << 4); + if (data->kind == nct6791) { + regval = superio_inb(sio_data->sioreg, 0x2d); + fan6pin = (regval & (1 << 1)); + pwm6pin = (regval & (1 << 0)); + } else { /* NCT6779D */ + fan6pin = false; + pwm6pin = false; + } + } - data->has_pwm = 0x03 | (pwm3pin << 2) | (pwm4pin << 3) | (pwm5pin << 4); + /* fan 1 and 2 (0x03) are always present */ + data->has_fan = 0x03 | (fan3pin << 2) | (fan4pin << 3) | + (fan5pin << 4) | (fan6pin << 5); + data->has_fan_min = 0x03 | (fan3pin << 2) | (fan4min << 3) | + (fan5pin << 4); + data->has_pwm = 0x03 | (pwm3pin << 2) | (pwm4pin << 3) | + (pwm5pin << 4) | (pwm6pin << 5); } static void add_temp_sensors(struct nct6775_data *data, const u16 *regp, @@ -3556,6 +3598,80 @@ static int nct6775_probe(struct platform_device *pdev) reg_temp_crit = NCT6779_REG_TEMP_CRIT; break; + case nct6791: + data->in_num = 15; + data->pwm_num = 6; + data->auto_pwm_num = 4; + data->has_fan_div = false; + data->temp_fixed_num = 6; + data->num_temp_alarms = 2; + data->num_temp_beeps = 2; + + data->ALARM_BITS = NCT6791_ALARM_BITS; + data->BEEP_BITS = NCT6779_BEEP_BITS; + + data->fan_from_reg = fan_from_reg13; + data->fan_from_reg_min = fan_from_reg13; + data->target_temp_mask = 0xff; + data->tolerance_mask = 0x07; + data->speed_tolerance_limit = 63; + + data->temp_label = nct6779_temp_label; + data->temp_label_num = ARRAY_SIZE(nct6779_temp_label); + + data->REG_CONFIG = NCT6775_REG_CONFIG; + data->REG_VBAT = NCT6775_REG_VBAT; + data->REG_DIODE = NCT6775_REG_DIODE; + data->DIODE_MASK = NCT6775_DIODE_MASK; + data->REG_VIN = NCT6779_REG_IN; + data->REG_IN_MINMAX[0] = NCT6775_REG_IN_MIN; + data->REG_IN_MINMAX[1] = NCT6775_REG_IN_MAX; + data->REG_TARGET = NCT6775_REG_TARGET; + data->REG_FAN = NCT6779_REG_FAN; + data->REG_FAN_MODE = NCT6775_REG_FAN_MODE; + data->REG_FAN_MIN = NCT6776_REG_FAN_MIN; + data->REG_FAN_PULSES = NCT6779_REG_FAN_PULSES; + data->FAN_PULSE_SHIFT = NCT6775_FAN_PULSE_SHIFT; + data->REG_FAN_TIME[0] = NCT6775_REG_FAN_STOP_TIME; + data->REG_FAN_TIME[1] = NCT6775_REG_FAN_STEP_UP_TIME; + data->REG_FAN_TIME[2] = NCT6775_REG_FAN_STEP_DOWN_TIME; + data->REG_TOLERANCE_H = NCT6776_REG_TOLERANCE_H; + data->REG_PWM[0] = NCT6775_REG_PWM; + data->REG_PWM[1] = NCT6775_REG_FAN_START_OUTPUT; + data->REG_PWM[2] = NCT6775_REG_FAN_STOP_OUTPUT; + data->REG_PWM[5] = NCT6775_REG_WEIGHT_DUTY_STEP; + data->REG_PWM[6] = NCT6776_REG_WEIGHT_DUTY_BASE; + data->REG_PWM_READ = NCT6775_REG_PWM_READ; + data->REG_PWM_MODE = NCT6776_REG_PWM_MODE; + data->PWM_MODE_MASK = NCT6776_PWM_MODE_MASK; + data->REG_AUTO_TEMP = NCT6775_REG_AUTO_TEMP; + data->REG_AUTO_PWM = NCT6775_REG_AUTO_PWM; + data->REG_CRITICAL_TEMP = NCT6775_REG_CRITICAL_TEMP; + data->REG_CRITICAL_TEMP_TOLERANCE + = NCT6775_REG_CRITICAL_TEMP_TOLERANCE; + data->REG_CRITICAL_PWM_ENABLE = NCT6779_REG_CRITICAL_PWM_ENABLE; + data->CRITICAL_PWM_ENABLE_MASK + = NCT6779_CRITICAL_PWM_ENABLE_MASK; + data->REG_CRITICAL_PWM = NCT6779_REG_CRITICAL_PWM; + data->REG_TEMP_OFFSET = NCT6779_REG_TEMP_OFFSET; + data->REG_TEMP_SOURCE = NCT6775_REG_TEMP_SOURCE; + data->REG_TEMP_SEL = NCT6775_REG_TEMP_SEL; + data->REG_WEIGHT_TEMP_SEL = NCT6775_REG_WEIGHT_TEMP_SEL; + data->REG_WEIGHT_TEMP[0] = NCT6775_REG_WEIGHT_TEMP_STEP; + data->REG_WEIGHT_TEMP[1] = NCT6775_REG_WEIGHT_TEMP_STEP_TOL; + data->REG_WEIGHT_TEMP[2] = NCT6775_REG_WEIGHT_TEMP_BASE; + data->REG_ALARM = NCT6791_REG_ALARM; + data->REG_BEEP = NCT6776_REG_BEEP; + + reg_temp = NCT6779_REG_TEMP; + num_reg_temp = ARRAY_SIZE(NCT6779_REG_TEMP); + reg_temp_over = NCT6779_REG_TEMP_OVER; + reg_temp_hyst = NCT6779_REG_TEMP_HYST; + reg_temp_config = NCT6779_REG_TEMP_CONFIG; + reg_temp_alternate = NCT6779_REG_TEMP_ALTERNATE; + reg_temp_crit = NCT6779_REG_TEMP_CRIT; + + break; default: return -ENODEV; } @@ -3702,6 +3818,7 @@ static int nct6775_probe(struct platform_device *pdev) break; case nct6106: case nct6779: + case nct6791: break; } @@ -3732,6 +3849,9 @@ static int nct6775_probe(struct platform_device *pdev) case nct6779: tmp |= 0x3e; break; + case nct6791: + tmp |= 0x7e; + break; } superio_outb(sio_data->sioreg, NCT6775_REG_CR_FAN_DEBOUNCE, tmp); @@ -3900,6 +4020,7 @@ static const char * const nct6775_sio_names[] __initconst = { "NCT6775F", "NCT6776D/F", "NCT6779D", + "NCT6791D", }; /* nct6775_find() looks for a '627 in the Super-I/O config space */ @@ -3931,6 +4052,9 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data) case SIO_NCT6779_ID: sio_data->kind = nct6779; break; + case SIO_NCT6791_ID: + sio_data->kind = nct6791; + break; default: if (val != 0xffff) pr_debug("unsupported chip ID: 0x%04x\n", val); @@ -3955,6 +4079,15 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data) pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n"); superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01); } + if (sio_data->kind == nct6791) { + val = superio_inb(sioaddr, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE); + if (val & 0x10) { + pr_info("Enabling hardware monitor logical device mappings.\n"); + superio_outb(sioaddr, + NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE, + val & ~0x10); + } + } superio_exit(sioaddr); pr_info("Found %s or compatible chip at %#x:%#x\n", |