diff options
130 files changed, 6308 insertions, 2357 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 166efa2..eed07ea 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -715,7 +715,8 @@ config ARCH_S5P64X0 select GENERIC_GPIO select HAVE_CLK select HAVE_S3C2410_WATCHDOG if WATCHDOG - select ARCH_USES_GETTIMEOFFSET + select GENERIC_CLOCKEVENTS + select HAVE_SCHED_CLOCK select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS help @@ -753,15 +754,16 @@ config ARCH_S5PV210 select HAVE_CLK select ARM_L1_CACHE_SHIFT_6 select ARCH_HAS_CPUFREQ - select ARCH_USES_GETTIMEOFFSET + select GENERIC_CLOCKEVENTS + select HAVE_SCHED_CLOCK select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG help Samsung S5PV210/S5PC110 series based systems -config ARCH_S5PV310 - bool "Samsung S5PV310/S5PC210" +config ARCH_EXYNOS4 + bool "Samsung EXYNOS4" select CPU_V7 select ARCH_SPARSEMEM_ENABLE select GENERIC_GPIO @@ -772,7 +774,7 @@ config ARCH_S5PV310 select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG help - Samsung S5PV310 series based systems + Samsung EXYNOS4 series based systems config ARCH_SHARK bool "Shark" @@ -991,7 +993,7 @@ source "arch/arm/mach-s5pc100/Kconfig" source "arch/arm/mach-s5pv210/Kconfig" -source "arch/arm/mach-s5pv310/Kconfig" +source "arch/arm/mach-exynos4/Kconfig" source "arch/arm/mach-shmobile/Kconfig" @@ -1278,7 +1280,7 @@ config SMP depends on GENERIC_CLOCKEVENTS depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ - ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \ + ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \ ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE select USE_GENERIC_SMP_HELPERS select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP @@ -1366,7 +1368,7 @@ config LOCAL_TIMERS bool "Use local timer interrupts" depends on SMP default y - select HAVE_ARM_TWD if !ARCH_MSM_SCORPIONMP + select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT) help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system @@ -1378,7 +1380,7 @@ source kernel/Kconfig.preempt config HZ int default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ - ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310 + ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 6f7b292..40aa022 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -178,7 +178,7 @@ machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 machine-$(CONFIG_ARCH_S5P6442) := s5p6442 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 -machine-$(CONFIG_ARCH_S5PV310) := s5pv310 +machine-$(CONFIG_ARCH_EXYNOS4) := exynos4 machine-$(CONFIG_ARCH_SA1100) := sa1100 machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SHMOBILE) := shmobile diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig new file mode 100644 index 0000000..2ffba24 --- /dev/null +++ b/arch/arm/configs/exynos4_defconfig @@ -0,0 +1,70 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_KALLSYMS_ALL=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_ARCH_EXYNOS4=y +CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_MACH_SMDKC210=y +CONFIG_MACH_SMDKV310=y +CONFIG_MACH_UNIVERSAL_C210=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +# CONFIG_HWMON is not set +# CONFIG_MFD_SUPPORT is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CRAMFS=y +CONFIG_ROMFS_FS=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_SPINLOCK_SLEEP=y +CONFIG_DEBUG_INFO=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +CONFIG_DEBUG_S3C_UART=1 +CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/s5p64x0_defconfig b/arch/arm/configs/s5p64x0_defconfig index 2993ecd..ad6b61b 100644 --- a/arch/arm/configs/s5p64x0_defconfig +++ b/arch/arm/configs/s5p64x0_defconfig @@ -10,6 +10,8 @@ CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_MACH_SMDK6440=y CONFIG_MACH_SMDK6450=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_CPU_32v6K=y CONFIG_AEABI=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index 0488a1e..fa98990 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -13,6 +13,8 @@ CONFIG_MACH_AQUILA=y CONFIG_MACH_GONI=y CONFIG_MACH_SMDKC110=y CONFIG_MACH_SMDKV210=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT=y CONFIG_AEABI=y diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig new file mode 100644 index 0000000..a021b52 --- /dev/null +++ b/arch/arm/mach-exynos4/Kconfig @@ -0,0 +1,195 @@ +# arch/arm/mach-exynos4/Kconfig +# +# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +# Configuration options for the EXYNOS4 + +if ARCH_EXYNOS4 + +config CPU_EXYNOS4210 + bool + select S3C_PL330_DMA + help + Enable EXYNOS4210 CPU support + +config EXYNOS4_MCT + bool "Kernel timer support by MCT" + help + Use MCT (Multi Core Timer) as kernel timers + +config EXYNOS4_DEV_PD + bool + help + Compile in platform device definitions for Power Domain + +config EXYNOS4_DEV_SYSMMU + bool + help + Common setup code for SYSTEM MMU in EXYNOS4 + +config EXYNOS4_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. + +config EXYNOS4_SETUP_I2C2 + bool + help + Common setup code for i2c bus 2. + +config EXYNOS4_SETUP_I2C3 + bool + help + Common setup code for i2c bus 3. + +config EXYNOS4_SETUP_I2C4 + bool + help + Common setup code for i2c bus 4. + +config EXYNOS4_SETUP_I2C5 + bool + help + Common setup code for i2c bus 5. + +config EXYNOS4_SETUP_I2C6 + bool + help + Common setup code for i2c bus 6. + +config EXYNOS4_SETUP_I2C7 + bool + help + Common setup code for i2c bus 7. + +config EXYNOS4_SETUP_KEYPAD + bool + help + Common setup code for keypad. + +config EXYNOS4_SETUP_SDHCI + bool + select EXYNOS4_SETUP_SDHCI_GPIO + help + Internal helper functions for EXYNOS4 based SDHCI systems. + +config EXYNOS4_SETUP_SDHCI_GPIO + bool + help + Common setup code for SDHCI gpio. + +config EXYNOS4_SETUP_FIMC + bool + help + Common setup code for the camera interfaces. + +# machine support + +menu "EXYNOS4 Machines" + +config MACH_SMDKC210 + bool "SMDKC210" + select CPU_EXYNOS4210 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C_DEV_I2C1 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select EXYNOS4_DEV_PD + select EXYNOS4_DEV_SYSMMU + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_SDHCI + help + Machine support for Samsung SMDKC210 + +config MACH_SMDKV310 + bool "SMDKV310" + select CPU_EXYNOS4210 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C_DEV_I2C1 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select SAMSUNG_DEV_KEYPAD + select EXYNOS4_DEV_PD + select EXYNOS4_DEV_SYSMMU + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_KEYPAD + select EXYNOS4_SETUP_SDHCI + help + Machine support for Samsung SMDKV310 + +config MACH_ARMLEX4210 + bool "ARMLEX4210" + select CPU_EXYNOS4210 + select S3C_DEV_RTC + select S3C_DEV_WDT + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select EXYNOS4_DEV_SYSMMU + select EXYNOS4_SETUP_SDHCI + select SATA_AHCI_PLATFORM + help + Machine support for Samsung ARMLEX4210 based on EXYNOS4210 + +config MACH_UNIVERSAL_C210 + bool "Mobile UNIVERSAL_C210 Board" + select CPU_EXYNOS4210 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S3C_DEV_I2C1 + select S3C_DEV_I2C5 + select S5P_DEV_ONENAND + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C5 + select EXYNOS4_SETUP_SDHCI + help + Machine support for Samsung Mobile Universal S5PC210 Reference + Board. + +config MACH_NURI + bool "Mobile NURI Board" + select CPU_EXYNOS4210 + select S3C_DEV_WDT + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S3C_DEV_I2C1 + select S3C_DEV_I2C5 + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C5 + select EXYNOS4_SETUP_SDHCI + select SAMSUNG_DEV_PWM + help + Machine support for Samsung Mobile NURI Board. + +endmenu + +comment "Configuration for HSMMC bus width" + +menu "Use 8-bit bus width" + +config EXYNOS4_SDHCI_CH0_8BIT + bool "Channel 0 with 8-bit bus" + help + Support HSMMC Channel 0 8-bit bus. + If selected, Channel 1 is disabled. + +config EXYNOS4_SDHCI_CH2_8BIT + bool "Channel 2 with 8-bit bus" + help + Support HSMMC Channel 2 8-bit bus. + If selected, Channel 3 is disabled. + +endmenu + +endif diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile new file mode 100644 index 0000000..b8f0e7d --- /dev/null +++ b/arch/arm/mach-exynos4/Makefile @@ -0,0 +1,56 @@ +# arch/arm/mach-exynos4/Makefile +# +# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. +# http://www.samsung.com/ +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for EXYNOS4 system + +obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o +obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o gpiolib.o irq-eint.o dma.o +obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_CPU_FREQ) += cpufreq.o + +obj-$(CONFIG_SMP) += platsmp.o headsmp.o + +ifeq ($(CONFIG_EXYNOS4_MCT),y) +obj-y += mct.o +else +obj-y += time.o +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o +endif + +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o + +# machine support + +obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o +obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o +obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o +obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o +obj-$(CONFIG_MACH_NURI) += mach-nuri.o + +# device support + +obj-y += dev-audio.o +obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o +obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o + +obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C4) += setup-i2c4.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C5) += setup-i2c5.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C6) += setup-i2c6.o +obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o +obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o +obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o +obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o +obj-$(CONFIG_SATA_AHCI_PLATFORM) += dev-ahci.o diff --git a/arch/arm/mach-s5pv310/Makefile.boot b/arch/arm/mach-exynos4/Makefile.boot index d65956f..d65956f 100644 --- a/arch/arm/mach-s5pv310/Makefile.boot +++ b/arch/arm/mach-exynos4/Makefile.boot diff --git a/arch/arm/mach-s5pv310/clock.c b/arch/arm/mach-exynos4/clock.c index fc7c2f8..871f9d5 100644 --- a/arch/arm/mach-s5pv310/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/clock.c +/* linux/arch/arm/mach-exynos4/clock.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - Clock support + * EXYNOS4 - Clock support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -23,6 +23,7 @@ #include <mach/map.h> #include <mach/regs-clock.h> +#include <mach/sysmmu.h> static struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", @@ -46,72 +47,82 @@ static struct clk clk_sclk_usbphy1 = { .id = -1, }; -static int s5pv310_clksrc_mask_top_ctrl(struct clk *clk, int enable) +static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable); } -static int s5pv310_clksrc_mask_cam_ctrl(struct clk *clk, int enable) +static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_CAM, clk, enable); } -static int s5pv310_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) +static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable); } -static int s5pv310_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) +static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable); } -static int s5pv310_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) +static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable); } -static int s5pv310_clksrc_mask_peril0_ctrl(struct clk *clk, int enable) +static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL0, clk, enable); } -static int s5pv310_clksrc_mask_peril1_ctrl(struct clk *clk, int enable) +static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL1, clk, enable); } -static int s5pv310_clk_ip_cam_ctrl(struct clk *clk, int enable) +static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable); +} + +static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable); } -static int s5pv310_clk_ip_image_ctrl(struct clk *clk, int enable) +static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKGATE_IP_TV, clk, enable); +} + +static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_IMAGE, clk, enable); } -static int s5pv310_clk_ip_lcd0_ctrl(struct clk *clk, int enable) +static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable); } -static int s5pv310_clk_ip_lcd1_ctrl(struct clk *clk, int enable) +static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable); } -static int s5pv310_clk_ip_fsys_ctrl(struct clk *clk, int enable) +static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable); } -static int s5pv310_clk_ip_peril_ctrl(struct clk *clk, int enable) +static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable); } -static int s5pv310_clk_ip_perir_ctrl(struct clk *clk, int enable) +static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable); } @@ -358,7 +369,7 @@ static struct clksrc_clk clk_vpllsrc = { .clk = { .name = "vpll_src", .id = -1, - .enable = s5pv310_clksrc_mask_top_ctrl, + .enable = exynos4_clksrc_mask_top_ctrl, .ctrlbit = (1 << 0), }, .sources = &clkset_vpllsrc, @@ -389,239 +400,322 @@ static struct clk init_clocks_off[] = { .name = "timers", .id = -1, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1<<24), }, { .name = "csis", .id = 0, - .enable = s5pv310_clk_ip_cam_ctrl, + .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 4), }, { .name = "csis", .id = 1, - .enable = s5pv310_clk_ip_cam_ctrl, + .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 5), }, { .name = "fimc", .id = 0, - .enable = s5pv310_clk_ip_cam_ctrl, + .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 0), }, { .name = "fimc", .id = 1, - .enable = s5pv310_clk_ip_cam_ctrl, + .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 1), }, { .name = "fimc", .id = 2, - .enable = s5pv310_clk_ip_cam_ctrl, + .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 2), }, { .name = "fimc", .id = 3, - .enable = s5pv310_clk_ip_cam_ctrl, + .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 3), }, { .name = "fimd", .id = 0, - .enable = s5pv310_clk_ip_lcd0_ctrl, + .enable = exynos4_clk_ip_lcd0_ctrl, .ctrlbit = (1 << 0), }, { .name = "fimd", .id = 1, - .enable = s5pv310_clk_ip_lcd1_ctrl, + .enable = exynos4_clk_ip_lcd1_ctrl, .ctrlbit = (1 << 0), }, { + .name = "sataphy", + .id = -1, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 3), + }, { .name = "hsmmc", .id = 0, .parent = &clk_aclk_133.clk, - .enable = s5pv310_clk_ip_fsys_ctrl, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 5), }, { .name = "hsmmc", .id = 1, .parent = &clk_aclk_133.clk, - .enable = s5pv310_clk_ip_fsys_ctrl, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 6), }, { .name = "hsmmc", .id = 2, .parent = &clk_aclk_133.clk, - .enable = s5pv310_clk_ip_fsys_ctrl, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 7), }, { .name = "hsmmc", .id = 3, .parent = &clk_aclk_133.clk, - .enable = s5pv310_clk_ip_fsys_ctrl, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 8), }, { .name = "hsmmc", .id = 4, .parent = &clk_aclk_133.clk, - .enable = s5pv310_clk_ip_fsys_ctrl, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 9), }, { .name = "sata", .id = -1, - .enable = s5pv310_clk_ip_fsys_ctrl, + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 10), }, { .name = "pdma", .id = 0, - .enable = s5pv310_clk_ip_fsys_ctrl, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 0), }, { .name = "pdma", .id = 1, - .enable = s5pv310_clk_ip_fsys_ctrl, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 1), }, { .name = "adc", .id = -1, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 15), }, { + .name = "keypad", + .id = -1, + .enable = exynos4_clk_ip_perir_ctrl, + .ctrlbit = (1 << 16), + }, { .name = "rtc", .id = -1, - .enable = s5pv310_clk_ip_perir_ctrl, + .enable = exynos4_clk_ip_perir_ctrl, .ctrlbit = (1 << 15), }, { .name = "watchdog", .id = -1, - .enable = s5pv310_clk_ip_perir_ctrl, + .parent = &clk_aclk_100.clk, + .enable = exynos4_clk_ip_perir_ctrl, .ctrlbit = (1 << 14), }, { .name = "usbhost", .id = -1, - .enable = s5pv310_clk_ip_fsys_ctrl , + .enable = exynos4_clk_ip_fsys_ctrl , .ctrlbit = (1 << 12), }, { .name = "otg", .id = -1, - .enable = s5pv310_clk_ip_fsys_ctrl, + .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 13), }, { .name = "spi", .id = 0, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 16), }, { .name = "spi", .id = 1, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 17), }, { .name = "spi", .id = 2, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 18), }, { .name = "iis", .id = 0, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 19), }, { .name = "iis", .id = 1, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 20), }, { .name = "iis", .id = 2, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 21), }, { .name = "ac97", .id = -1, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 27), }, { .name = "fimg2d", .id = -1, - .enable = s5pv310_clk_ip_image_ctrl, + .enable = exynos4_clk_ip_image_ctrl, .ctrlbit = (1 << 0), }, { .name = "i2c", .id = 0, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 6), }, { .name = "i2c", .id = 1, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 7), }, { .name = "i2c", .id = 2, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 8), }, { .name = "i2c", .id = 3, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 9), }, { .name = "i2c", .id = 4, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 10), }, { .name = "i2c", .id = 5, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 11), }, { .name = "i2c", .id = 6, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 12), }, { .name = "i2c", .id = 7, .parent = &clk_aclk_100.clk, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 13), - }, + }, { + .name = "SYSMMU_MDMA", + .id = -1, + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 5), + }, { + .name = "SYSMMU_FIMC0", + .id = -1, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 7), + }, { + .name = "SYSMMU_FIMC1", + .id = -1, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "SYSMMU_FIMC2", + .id = -1, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "SYSMMU_FIMC3", + .id = -1, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "SYSMMU_JPEG", + .id = -1, + .enable = exynos4_clk_ip_cam_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = "SYSMMU_FIMD0", + .id = -1, + .enable = exynos4_clk_ip_lcd0_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "SYSMMU_FIMD1", + .id = -1, + .enable = exynos4_clk_ip_lcd1_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "SYSMMU_PCIe", + .id = -1, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 18), + }, { + .name = "SYSMMU_G2D", + .id = -1, + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "SYSMMU_ROTATOR", + .id = -1, + .enable = exynos4_clk_ip_image_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "SYSMMU_TV", + .id = -1, + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 4), + }, { + .name = "SYSMMU_MFC_L", + .id = -1, + .enable = exynos4_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "SYSMMU_MFC_R", + .id = -1, + .enable = exynos4_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 2), + } }; static struct clk init_clocks[] = { { .name = "uart", .id = 0, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 0), }, { .name = "uart", .id = 1, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 1), }, { .name = "uart", .id = 2, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 2), }, { .name = "uart", .id = 3, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 3), }, { .name = "uart", .id = 4, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 4), }, { .name = "uart", .id = 5, - .enable = s5pv310_clk_ip_peril_ctrl, + .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 5), } }; @@ -746,7 +840,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "uclk1", .id = 0, - .enable = s5pv310_clksrc_mask_peril0_ctrl, + .enable = exynos4_clksrc_mask_peril0_ctrl, .ctrlbit = (1 << 0), }, .sources = &clkset_group, @@ -756,7 +850,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "uclk1", .id = 1, - .enable = s5pv310_clksrc_mask_peril0_ctrl, + .enable = exynos4_clksrc_mask_peril0_ctrl, .ctrlbit = (1 << 4), }, .sources = &clkset_group, @@ -766,7 +860,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "uclk1", .id = 2, - .enable = s5pv310_clksrc_mask_peril0_ctrl, + .enable = exynos4_clksrc_mask_peril0_ctrl, .ctrlbit = (1 << 8), }, .sources = &clkset_group, @@ -776,7 +870,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "uclk1", .id = 3, - .enable = s5pv310_clksrc_mask_peril0_ctrl, + .enable = exynos4_clksrc_mask_peril0_ctrl, .ctrlbit = (1 << 12), }, .sources = &clkset_group, @@ -786,7 +880,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_pwm", .id = -1, - .enable = s5pv310_clksrc_mask_peril0_ctrl, + .enable = exynos4_clksrc_mask_peril0_ctrl, .ctrlbit = (1 << 24), }, .sources = &clkset_group, @@ -796,7 +890,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_csis", .id = 0, - .enable = s5pv310_clksrc_mask_cam_ctrl, + .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 24), }, .sources = &clkset_group, @@ -806,7 +900,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_csis", .id = 1, - .enable = s5pv310_clksrc_mask_cam_ctrl, + .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 28), }, .sources = &clkset_group, @@ -816,7 +910,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_cam", .id = 0, - .enable = s5pv310_clksrc_mask_cam_ctrl, + .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 16), }, .sources = &clkset_group, @@ -826,7 +920,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_cam", .id = 1, - .enable = s5pv310_clksrc_mask_cam_ctrl, + .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 20), }, .sources = &clkset_group, @@ -836,7 +930,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_fimc", .id = 0, - .enable = s5pv310_clksrc_mask_cam_ctrl, + .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 0), }, .sources = &clkset_group, @@ -846,7 +940,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_fimc", .id = 1, - .enable = s5pv310_clksrc_mask_cam_ctrl, + .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 4), }, .sources = &clkset_group, @@ -856,7 +950,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_fimc", .id = 2, - .enable = s5pv310_clksrc_mask_cam_ctrl, + .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 8), }, .sources = &clkset_group, @@ -866,7 +960,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_fimc", .id = 3, - .enable = s5pv310_clksrc_mask_cam_ctrl, + .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 12), }, .sources = &clkset_group, @@ -876,7 +970,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_fimd", .id = 0, - .enable = s5pv310_clksrc_mask_lcd0_ctrl, + .enable = exynos4_clksrc_mask_lcd0_ctrl, .ctrlbit = (1 << 0), }, .sources = &clkset_group, @@ -886,7 +980,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_fimd", .id = 1, - .enable = s5pv310_clksrc_mask_lcd1_ctrl, + .enable = exynos4_clksrc_mask_lcd1_ctrl, .ctrlbit = (1 << 0), }, .sources = &clkset_group, @@ -896,7 +990,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_sata", .id = -1, - .enable = s5pv310_clksrc_mask_fsys_ctrl, + .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 24), }, .sources = &clkset_mout_corebus, @@ -906,7 +1000,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_spi", .id = 0, - .enable = s5pv310_clksrc_mask_peril1_ctrl, + .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 16), }, .sources = &clkset_group, @@ -916,7 +1010,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_spi", .id = 1, - .enable = s5pv310_clksrc_mask_peril1_ctrl, + .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 20), }, .sources = &clkset_group, @@ -926,7 +1020,7 @@ static struct clksrc_clk clksrcs[] = { .clk = { .name = "sclk_spi", .id = 2, - .enable = s5pv310_clksrc_mask_peril1_ctrl, + .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 24), }, .sources = &clkset_group, @@ -945,7 +1039,7 @@ static struct clksrc_clk clksrcs[] = { .name = "sclk_mmc", .id = 0, .parent = &clk_dout_mmc0.clk, - .enable = s5pv310_clksrc_mask_fsys_ctrl, + .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 0), }, .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 }, @@ -954,7 +1048,7 @@ static struct clksrc_clk clksrcs[] = { .name = "sclk_mmc", .id = 1, .parent = &clk_dout_mmc1.clk, - .enable = s5pv310_clksrc_mask_fsys_ctrl, + .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 4), }, .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 }, @@ -963,7 +1057,7 @@ static struct clksrc_clk clksrcs[] = { .name = "sclk_mmc", .id = 2, .parent = &clk_dout_mmc2.clk, - .enable = s5pv310_clksrc_mask_fsys_ctrl, + .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 8), }, .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 }, @@ -972,7 +1066,7 @@ static struct clksrc_clk clksrcs[] = { .name = "sclk_mmc", .id = 3, .parent = &clk_dout_mmc3.clk, - .enable = s5pv310_clksrc_mask_fsys_ctrl, + .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 12), }, .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 }, @@ -981,7 +1075,7 @@ static struct clksrc_clk clksrcs[] = { .name = "sclk_mmc", .id = 4, .parent = &clk_dout_mmc4.clk, - .enable = s5pv310_clksrc_mask_fsys_ctrl, + .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 16), }, .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 8, .size = 8 }, @@ -1022,16 +1116,16 @@ static struct clksrc_clk *sysclks[] = { static int xtal_rate; -static unsigned long s5pv310_fout_apll_get_rate(struct clk *clk) +static unsigned long exynos4_fout_apll_get_rate(struct clk *clk) { return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508); } -static struct clk_ops s5pv310_fout_apll_ops = { - .get_rate = s5pv310_fout_apll_get_rate, +static struct clk_ops exynos4_fout_apll_ops = { + .get_rate = exynos4_fout_apll_get_rate, }; -void __init_or_cpufreq s5pv310_setup_clocks(void) +void __init_or_cpufreq exynos4_setup_clocks(void) { struct clk *xtal_clk; unsigned long apll; @@ -1070,12 +1164,12 @@ void __init_or_cpufreq s5pv310_setup_clocks(void) vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), __raw_readl(S5P_VPLL_CON1), pll_4650); - clk_fout_apll.ops = &s5pv310_fout_apll_ops; + clk_fout_apll.ops = &exynos4_fout_apll_ops; clk_fout_mpll.rate = mpll; clk_fout_epll.rate = epll; clk_fout_vpll.rate = vpll; - printk(KERN_INFO "S5PV310: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", + printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", apll, mpll, epll, vpll); armclk = clk_get_rate(&clk_armclk.clk); @@ -1086,7 +1180,7 @@ void __init_or_cpufreq s5pv310_setup_clocks(void) aclk_160 = clk_get_rate(&clk_aclk_160.clk); aclk_133 = clk_get_rate(&clk_aclk_133.clk); - printk(KERN_INFO "S5PV310: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n" + printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n" "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n", armclk, sclk_dmc, aclk_200, aclk_100, aclk_160, aclk_133); @@ -1103,7 +1197,7 @@ static struct clk *clks[] __initdata = { /* Nothing here yet */ }; -void __init s5pv310_register_clocks(void) +void __init exynos4_register_clocks(void) { int ptr; diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-exynos4/cpu.c index 0db0fb6..7930113 100644 --- a/arch/arm/mach-s5pv310/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5pv310/cpu.c +/* linux/arch/arm/mach-exynos4/cpu.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,8 +19,10 @@ #include <plat/cpu.h> #include <plat/clock.h> -#include <plat/s5pv310.h> +#include <plat/exynos4.h> #include <plat/sdhci.h> +#include <plat/devs.h> +#include <plat/fimc-core.h> #include <mach/regs-irq.h> @@ -29,55 +31,60 @@ extern int combiner_init(unsigned int combiner_nr, void __iomem *base, extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq); /* Initial IO mappings */ -static struct map_desc s5pv310_iodesc[] __initdata = { +static struct map_desc exynos4_iodesc[] __initdata = { { + .virtual = (unsigned long)S5P_VA_SYSTIMER, + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSTIMER), + .length = SZ_4K, + .type = MT_DEVICE, + }, { .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(S5PV310_PA_SYSRAM), + .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM), .length = SZ_4K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_CMU, - .pfn = __phys_to_pfn(S5PV310_PA_CMU), + .pfn = __phys_to_pfn(EXYNOS4_PA_CMU), .length = SZ_128K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_PMU, - .pfn = __phys_to_pfn(S5PV310_PA_PMU), + .pfn = __phys_to_pfn(EXYNOS4_PA_PMU), .length = SZ_64K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_COMBINER_BASE, - .pfn = __phys_to_pfn(S5PV310_PA_COMBINER), + .pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER), .length = SZ_4K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_COREPERI_BASE, - .pfn = __phys_to_pfn(S5PV310_PA_COREPERI), + .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI), .length = SZ_8K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_L2CC, - .pfn = __phys_to_pfn(S5PV310_PA_L2CC), + .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC), .length = SZ_4K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_GPIO1, - .pfn = __phys_to_pfn(S5PV310_PA_GPIO1), + .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1), .length = SZ_4K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_GPIO2, - .pfn = __phys_to_pfn(S5PV310_PA_GPIO2), + .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2), .length = SZ_4K, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_GPIO3, - .pfn = __phys_to_pfn(S5PV310_PA_GPIO3), + .pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3), .length = SZ_256, .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_DMC0, - .pfn = __phys_to_pfn(S5PV310_PA_DMC0), + .pfn = __phys_to_pfn(EXYNOS4_PA_DMC0), .length = SZ_4K, .type = MT_DEVICE, }, { @@ -87,13 +94,13 @@ static struct map_desc s5pv310_iodesc[] __initdata = { .type = MT_DEVICE, }, { .virtual = (unsigned long)S5P_VA_SROMC, - .pfn = __phys_to_pfn(S5PV310_PA_SROMC), + .pfn = __phys_to_pfn(EXYNOS4_PA_SROMC), .length = SZ_4K, .type = MT_DEVICE, }, }; -static void s5pv310_idle(void) +static void exynos4_idle(void) { if (!need_resched()) cpu_do_idle(); @@ -101,32 +108,38 @@ static void s5pv310_idle(void) local_irq_enable(); } -/* s5pv310_map_io +/* + * exynos4_map_io * * register the standard cpu IO areas -*/ -void __init s5pv310_map_io(void) + */ +void __init exynos4_map_io(void) { - iotable_init(s5pv310_iodesc, ARRAY_SIZE(s5pv310_iodesc)); + iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc)); /* initialize device information early */ - s5pv310_default_sdhci0(); - s5pv310_default_sdhci1(); - s5pv310_default_sdhci2(); - s5pv310_default_sdhci3(); + exynos4_default_sdhci0(); + exynos4_default_sdhci1(); + exynos4_default_sdhci2(); + exynos4_default_sdhci3(); + + s3c_fimc_setname(0, "exynos4-fimc"); + s3c_fimc_setname(1, "exynos4-fimc"); + s3c_fimc_setname(2, "exynos4-fimc"); + s3c_fimc_setname(3, "exynos4-fimc"); } -void __init s5pv310_init_clocks(int xtal) +void __init exynos4_init_clocks(int xtal) { printk(KERN_DEBUG "%s: initializing clocks\n", __func__); s3c24xx_register_baseclocks(xtal); s5p_register_clocks(xtal); - s5pv310_register_clocks(); - s5pv310_setup_clocks(); + exynos4_register_clocks(); + exynos4_setup_clocks(); } -void __init s5pv310_init_irq(void) +void __init exynos4_init_irq(void) { int irq; @@ -148,29 +161,29 @@ void __init s5pv310_init_irq(void) } /* The parameters of s5p_init_irq() are for VIC init. - * Theses parameters should be NULL and 0 because S5PV310 + * Theses parameters should be NULL and 0 because EXYNOS4 * uses GIC instead of VIC. */ s5p_init_irq(NULL, 0); } -struct sysdev_class s5pv310_sysclass = { - .name = "s5pv310-core", +struct sysdev_class exynos4_sysclass = { + .name = "exynos4-core", }; -static struct sys_device s5pv310_sysdev = { - .cls = &s5pv310_sysclass, +static struct sys_device exynos4_sysdev = { + .cls = &exynos4_sysclass, }; -static int __init s5pv310_core_init(void) +static int __init exynos4_core_init(void) { - return sysdev_class_register(&s5pv310_sysclass); + return sysdev_class_register(&exynos4_sysclass); } -core_initcall(s5pv310_core_init); +core_initcall(exynos4_core_init); #ifdef CONFIG_CACHE_L2X0 -static int __init s5pv310_l2x0_cache_init(void) +static int __init exynos4_l2x0_cache_init(void) { /* TAG, Data Latency Control: 2cycle */ __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL); @@ -188,15 +201,15 @@ static int __init s5pv310_l2x0_cache_init(void) return 0; } -early_initcall(s5pv310_l2x0_cache_init); +early_initcall(exynos4_l2x0_cache_init); #endif -int __init s5pv310_init(void) +int __init exynos4_init(void) { - printk(KERN_INFO "S5PV310: Initializing architecture\n"); + printk(KERN_INFO "EXYNOS4: Initializing architecture\n"); /* set idle function */ - pm_idle = s5pv310_idle; + pm_idle = exynos4_idle; - return sysdev_register(&s5pv310_sysdev); + return sysdev_register(&exynos4_sysdev); } diff --git a/arch/arm/mach-s5pv310/cpufreq.c b/arch/arm/mach-exynos4/cpufreq.c index b04cbc7..a16ac35 100644 --- a/arch/arm/mach-s5pv310/cpufreq.c +++ b/arch/arm/mach-exynos4/cpufreq.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/cpufreq.c +/* linux/arch/arm/mach-exynos4/cpufreq.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * S5PV310 - CPU frequency scaling support + * EXYNOS4 - CPU frequency scaling support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -31,15 +31,13 @@ static struct clk *moutcore; static struct clk *mout_mpll; static struct clk *mout_apll; -#ifdef CONFIG_REGULATOR static struct regulator *arm_regulator; static struct regulator *int_regulator; -#endif static struct cpufreq_freqs freqs; static unsigned int memtype; -enum s5pv310_memory_type { +enum exynos4_memory_type { DDR2 = 4, LPDDR2, DDR3, @@ -49,7 +47,7 @@ enum cpufreq_level_index { L0, L1, L2, L3, CPUFREQ_LEVEL_END, }; -static struct cpufreq_frequency_table s5pv310_freq_table[] = { +static struct cpufreq_frequency_table exynos4_freq_table[] = { {L0, 1000*1000}, {L1, 800*1000}, {L2, 400*1000}, @@ -160,7 +158,7 @@ struct cpufreq_voltage_table { unsigned int int_volt; }; -static struct cpufreq_voltage_table s5pv310_volt_table[CPUFREQ_LEVEL_END] = { +static struct cpufreq_voltage_table exynos4_volt_table[CPUFREQ_LEVEL_END] = { { .index = L0, .arm_volt = 1200000, @@ -180,7 +178,7 @@ static struct cpufreq_voltage_table s5pv310_volt_table[CPUFREQ_LEVEL_END] = { }, }; -static unsigned int s5pv310_apll_pms_table[CPUFREQ_LEVEL_END] = { +static unsigned int exynos4_apll_pms_table[CPUFREQ_LEVEL_END] = { /* APLL FOUT L0: 1000MHz */ ((250 << 16) | (6 << 8) | 1), @@ -194,17 +192,17 @@ static unsigned int s5pv310_apll_pms_table[CPUFREQ_LEVEL_END] = { ((200 << 16) | (6 << 8) | 4), }; -int s5pv310_verify_speed(struct cpufreq_policy *policy) +int exynos4_verify_speed(struct cpufreq_policy *policy) { - return cpufreq_frequency_table_verify(policy, s5pv310_freq_table); + return cpufreq_frequency_table_verify(policy, exynos4_freq_table); } -unsigned int s5pv310_getspeed(unsigned int cpu) +unsigned int exynos4_getspeed(unsigned int cpu) { return clk_get_rate(cpu_clk) / 1000; } -void s5pv310_set_clkdiv(unsigned int div_index) +void exynos4_set_clkdiv(unsigned int div_index) { unsigned int tmp; @@ -321,7 +319,7 @@ void s5pv310_set_clkdiv(unsigned int div_index) } while (tmp & 0x11); } -static void s5pv310_set_apll(unsigned int index) +static void exynos4_set_apll(unsigned int index) { unsigned int tmp; @@ -340,7 +338,7 @@ static void s5pv310_set_apll(unsigned int index) /* 3. Change PLL PMS values */ tmp = __raw_readl(S5P_APLL_CON0); tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0)); - tmp |= s5pv310_apll_pms_table[index]; + tmp |= exynos4_apll_pms_table[index]; __raw_writel(tmp, S5P_APLL_CON0); /* 4. wait_lock_time */ @@ -357,99 +355,95 @@ static void s5pv310_set_apll(unsigned int index) } while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)); } -static void s5pv310_set_frequency(unsigned int old_index, unsigned int new_index) +static void exynos4_set_frequency(unsigned int old_index, unsigned int new_index) { unsigned int tmp; if (old_index > new_index) { /* The frequency changing to L0 needs to change apll */ - if (freqs.new == s5pv310_freq_table[L0].frequency) { + if (freqs.new == exynos4_freq_table[L0].frequency) { /* 1. Change the system clock divider values */ - s5pv310_set_clkdiv(new_index); + exynos4_set_clkdiv(new_index); /* 2. Change the apll m,p,s value */ - s5pv310_set_apll(new_index); + exynos4_set_apll(new_index); } else { /* 1. Change the system clock divider values */ - s5pv310_set_clkdiv(new_index); + exynos4_set_clkdiv(new_index); /* 2. Change just s value in apll m,p,s value */ tmp = __raw_readl(S5P_APLL_CON0); tmp &= ~(0x7 << 0); - tmp |= (s5pv310_apll_pms_table[new_index] & 0x7); + tmp |= (exynos4_apll_pms_table[new_index] & 0x7); __raw_writel(tmp, S5P_APLL_CON0); } } else if (old_index < new_index) { /* The frequency changing from L0 needs to change apll */ - if (freqs.old == s5pv310_freq_table[L0].frequency) { + if (freqs.old == exynos4_freq_table[L0].frequency) { /* 1. Change the apll m,p,s value */ - s5pv310_set_apll(new_index); + exynos4_set_apll(new_index); /* 2. Change the system clock divider values */ - s5pv310_set_clkdiv(new_index); + exynos4_set_clkdiv(new_index); } else { /* 1. Change just s value in apll m,p,s value */ tmp = __raw_readl(S5P_APLL_CON0); tmp &= ~(0x7 << 0); - tmp |= (s5pv310_apll_pms_table[new_index] & 0x7); + tmp |= (exynos4_apll_pms_table[new_index] & 0x7); __raw_writel(tmp, S5P_APLL_CON0); /* 2. Change the system clock divider values */ - s5pv310_set_clkdiv(new_index); + exynos4_set_clkdiv(new_index); } } } -static int s5pv310_target(struct cpufreq_policy *policy, +static int exynos4_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { unsigned int index, old_index; unsigned int arm_volt, int_volt; - freqs.old = s5pv310_getspeed(policy->cpu); + freqs.old = exynos4_getspeed(policy->cpu); - if (cpufreq_frequency_table_target(policy, s5pv310_freq_table, + if (cpufreq_frequency_table_target(policy, exynos4_freq_table, freqs.old, relation, &old_index)) return -EINVAL; - if (cpufreq_frequency_table_target(policy, s5pv310_freq_table, + if (cpufreq_frequency_table_target(policy, exynos4_freq_table, target_freq, relation, &index)) return -EINVAL; - freqs.new = s5pv310_freq_table[index].frequency; + freqs.new = exynos4_freq_table[index].frequency; freqs.cpu = policy->cpu; if (freqs.new == freqs.old) return 0; /* get the voltage value */ - arm_volt = s5pv310_volt_table[index].arm_volt; - int_volt = s5pv310_volt_table[index].int_volt; + arm_volt = exynos4_volt_table[index].arm_volt; + int_volt = exynos4_volt_table[index].int_volt; cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); /* control regulator */ if (freqs.new > freqs.old) { /* Voltage up */ -#ifdef CONFIG_REGULATOR regulator_set_voltage(arm_regulator, arm_volt, arm_volt); regulator_set_voltage(int_regulator, int_volt, int_volt); -#endif } /* Clock Configuration Procedure */ - s5pv310_set_frequency(old_index, index); + exynos4_set_frequency(old_index, index); /* control regulator */ if (freqs.new < freqs.old) { /* Voltage down */ -#ifdef CONFIG_REGULATOR regulator_set_voltage(arm_regulator, arm_volt, arm_volt); regulator_set_voltage(int_regulator, int_volt, int_volt); -#endif } cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); @@ -458,52 +452,52 @@ static int s5pv310_target(struct cpufreq_policy *policy, } #ifdef CONFIG_PM -static int s5pv310_cpufreq_suspend(struct cpufreq_policy *policy, +static int exynos4_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg) { return 0; } -static int s5pv310_cpufreq_resume(struct cpufreq_policy *policy) +static int exynos4_cpufreq_resume(struct cpufreq_policy *policy) { return 0; } #endif -static int s5pv310_cpufreq_cpu_init(struct cpufreq_policy *policy) +static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy) { - policy->cur = policy->min = policy->max = s5pv310_getspeed(policy->cpu); + policy->cur = policy->min = policy->max = exynos4_getspeed(policy->cpu); - cpufreq_frequency_table_get_attr(s5pv310_freq_table, policy->cpu); + cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu); /* set the transition latency value */ policy->cpuinfo.transition_latency = 100000; /* - * S5PV310 multi-core processors has 2 cores + * EXYNOS4 multi-core processors has 2 cores * that the frequency cannot be set independently. * Each cpu is bound to the same speed. * So the affected cpu is all of the cpus. */ cpumask_setall(policy->cpus); - return cpufreq_frequency_table_cpuinfo(policy, s5pv310_freq_table); + return cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table); } -static struct cpufreq_driver s5pv310_driver = { +static struct cpufreq_driver exynos4_driver = { .flags = CPUFREQ_STICKY, - .verify = s5pv310_verify_speed, - .target = s5pv310_target, - .get = s5pv310_getspeed, - .init = s5pv310_cpufreq_cpu_init, - .name = "s5pv310_cpufreq", + .verify = exynos4_verify_speed, + .target = exynos4_target, + .get = exynos4_getspeed, + .init = exynos4_cpufreq_cpu_init, + .name = "exynos4_cpufreq", #ifdef CONFIG_PM - .suspend = s5pv310_cpufreq_suspend, - .resume = s5pv310_cpufreq_resume, + .suspend = exynos4_cpufreq_suspend, + .resume = exynos4_cpufreq_resume, #endif }; -static int __init s5pv310_cpufreq_init(void) +static int __init exynos4_cpufreq_init(void) { cpu_clk = clk_get(NULL, "armclk"); if (IS_ERR(cpu_clk)) @@ -521,7 +515,6 @@ static int __init s5pv310_cpufreq_init(void) if (IS_ERR(mout_apll)) goto out; -#ifdef CONFIG_REGULATOR arm_regulator = regulator_get(NULL, "vdd_arm"); if (IS_ERR(arm_regulator)) { printk(KERN_ERR "failed to get resource %s\n", "vdd_arm"); @@ -533,7 +526,6 @@ static int __init s5pv310_cpufreq_init(void) printk(KERN_ERR "failed to get resource %s\n", "vdd_int"); goto out; } -#endif /* * Check DRAM type. @@ -550,7 +542,7 @@ static int __init s5pv310_cpufreq_init(void) printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype); } - return cpufreq_register_driver(&s5pv310_driver); + return cpufreq_register_driver(&exynos4_driver); out: if (!IS_ERR(cpu_clk)) @@ -565,16 +557,14 @@ out: if (!IS_ERR(mout_apll)) clk_put(mout_apll); -#ifdef CONFIG_REGULATOR if (!IS_ERR(arm_regulator)) regulator_put(arm_regulator); if (!IS_ERR(int_regulator)) regulator_put(int_regulator); -#endif printk(KERN_ERR "%s: failed initialization\n", __func__); return -EINVAL; } -late_initcall(s5pv310_cpufreq_init); +late_initcall(exynos4_cpufreq_init); diff --git a/arch/arm/mach-exynos4/dev-ahci.c b/arch/arm/mach-exynos4/dev-ahci.c new file mode 100644 index 0000000..f57a3de --- /dev/null +++ b/arch/arm/mach-exynos4/dev-ahci.c @@ -0,0 +1,263 @@ +/* linux/arch/arm/mach-exynos4/dev-ahci.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - AHCI support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/ahci_platform.h> + +#include <plat/cpu.h> + +#include <mach/irqs.h> +#include <mach/map.h> +#include <mach/regs-pmu.h> + +/* PHY Control Register */ +#define SATA_CTRL0 0x0 +/* PHY Link Control Register */ +#define SATA_CTRL1 0x4 +/* PHY Status Register */ +#define SATA_PHY_STATUS 0x8 + +#define SATA_CTRL0_RX_DATA_VALID(x) (x << 27) +#define SATA_CTRL0_SPEED_MODE (1 << 26) +#define SATA_CTRL0_M_PHY_CAL (1 << 19) +#define SATA_CTRL0_PHY_CMU_RST_N (1 << 10) +#define SATA_CTRL0_M_PHY_LN_RST_N (1 << 9) +#define SATA_CTRL0_PHY_POR_N (1 << 8) + +#define SATA_CTRL1_RST_PMALIVE_N (1 << 8) +#define SATA_CTRL1_RST_RXOOB_N (1 << 7) +#define SATA_CTRL1_RST_RX_N (1 << 6) +#define SATA_CTRL1_RST_TX_N (1 << 5) + +#define SATA_PHY_STATUS_CMU_OK (1 << 18) +#define SATA_PHY_STATUS_LANE_OK (1 << 16) + +#define LANE0 0x200 +#define COM_LANE 0xA00 + +#define HOST_PORTS_IMPL 0xC +#define SCLK_SATA_FREQ (67 * MHZ) + +static void __iomem *phy_base, *phy_ctrl; + +struct phy_reg { + u8 reg; + u8 val; +}; + +/* SATA PHY setup */ +static const struct phy_reg exynos4_sataphy_cmu[] = { + { 0x00, 0x06 }, { 0x02, 0x80 }, { 0x22, 0xa0 }, { 0x23, 0x42 }, + { 0x2e, 0x04 }, { 0x2f, 0x50 }, { 0x30, 0x70 }, { 0x31, 0x02 }, + { 0x32, 0x25 }, { 0x33, 0x40 }, { 0x34, 0x01 }, { 0x35, 0x40 }, + { 0x61, 0x2e }, { 0x63, 0x5e }, { 0x65, 0x42 }, { 0x66, 0xd1 }, + { 0x67, 0x20 }, { 0x68, 0x28 }, { 0x69, 0x78 }, { 0x6a, 0x04 }, + { 0x6b, 0xc8 }, { 0x6c, 0x06 }, +}; + +static const struct phy_reg exynos4_sataphy_lane[] = { + { 0x00, 0x02 }, { 0x05, 0x10 }, { 0x06, 0x84 }, { 0x07, 0x04 }, + { 0x08, 0xe0 }, { 0x10, 0x23 }, { 0x13, 0x05 }, { 0x14, 0x30 }, + { 0x15, 0x00 }, { 0x17, 0x70 }, { 0x18, 0xf2 }, { 0x19, 0x1e }, + { 0x1a, 0x18 }, { 0x1b, 0x0d }, { 0x1c, 0x08 }, { 0x50, 0x60 }, + { 0x51, 0x0f }, +}; + +static const struct phy_reg exynos4_sataphy_comlane[] = { + { 0x01, 0x20 }, { 0x03, 0x40 }, { 0x04, 0x3c }, { 0x05, 0x7d }, + { 0x06, 0x1d }, { 0x07, 0xcf }, { 0x08, 0x05 }, { 0x09, 0x63 }, + { 0x0a, 0x29 }, { 0x0b, 0xc4 }, { 0x0c, 0x01 }, { 0x0d, 0x03 }, + { 0x0e, 0x28 }, { 0x0f, 0x98 }, { 0x10, 0x19 }, { 0x13, 0x80 }, + { 0x14, 0xf0 }, { 0x15, 0xd0 }, { 0x39, 0xa0 }, { 0x3a, 0xa0 }, + { 0x3b, 0xa0 }, { 0x3c, 0xa0 }, { 0x3d, 0xa0 }, { 0x3e, 0xa0 }, + { 0x3f, 0xa0 }, { 0x40, 0x42 }, { 0x42, 0x80 }, { 0x43, 0x58 }, + { 0x45, 0x44 }, { 0x46, 0x5c }, { 0x47, 0x86 }, { 0x48, 0x8d }, + { 0x49, 0xd0 }, { 0x4a, 0x09 }, { 0x4b, 0x90 }, { 0x4c, 0x07 }, + { 0x4d, 0x40 }, { 0x51, 0x20 }, { 0x52, 0x32 }, { 0x7f, 0xd8 }, + { 0x80, 0x1a }, { 0x81, 0xff }, { 0x82, 0x11 }, { 0x83, 0x00 }, + { 0x87, 0xf0 }, { 0x87, 0xff }, { 0x87, 0xff }, { 0x87, 0xff }, + { 0x87, 0xff }, { 0x8c, 0x1c }, { 0x8d, 0xc2 }, { 0x8e, 0xc3 }, + { 0x8f, 0x3f }, { 0x90, 0x0a }, { 0x96, 0xf8 }, +}; + +static int wait_for_phy_ready(void __iomem *reg, unsigned long bit) +{ + unsigned long timeout; + + /* wait for maximum of 3 sec */ + timeout = jiffies + msecs_to_jiffies(3000); + while (!(__raw_readl(reg) & bit)) { + if (time_after(jiffies, timeout)) + return -1; + cpu_relax(); + } + return 0; +} + +static int ahci_phy_init(void __iomem *mmio) +{ + int i, ctrl0; + + for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_cmu); i++) + __raw_writeb(exynos4_sataphy_cmu[i].val, + phy_base + (exynos4_sataphy_cmu[i].reg * 4)); + + for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_lane); i++) + __raw_writeb(exynos4_sataphy_lane[i].val, + phy_base + (LANE0 + exynos4_sataphy_lane[i].reg) * 4); + + for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_comlane); i++) + __raw_writeb(exynos4_sataphy_comlane[i].val, + phy_base + (COM_LANE + exynos4_sataphy_comlane[i].reg) * 4); + + __raw_writeb(0x07, phy_base); + + ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); + ctrl0 |= SATA_CTRL0_PHY_CMU_RST_N; + __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); + + if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS, + SATA_PHY_STATUS_CMU_OK) < 0) { + printk(KERN_ERR "PHY CMU not ready\n"); + return -EBUSY; + } + + __raw_writeb(0x03, phy_base + (COM_LANE * 4)); + + ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); + ctrl0 |= SATA_CTRL0_M_PHY_LN_RST_N; + __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); + + if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS, + SATA_PHY_STATUS_LANE_OK) < 0) { + printk(KERN_ERR "PHY LANE not ready\n"); + return -EBUSY; + } + + ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); + ctrl0 |= SATA_CTRL0_M_PHY_CAL; + __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); + + return 0; +} + +static int exynos4_ahci_init(struct device *dev, void __iomem *mmio) +{ + struct clk *clk_sata, *clk_sataphy, *clk_sclk_sata; + int val, ret; + + phy_base = ioremap(EXYNOS4_PA_SATAPHY, SZ_64K); + if (!phy_base) { + dev_err(dev, "failed to allocate memory for SATA PHY\n"); + return -ENOMEM; + } + + phy_ctrl = ioremap(EXYNOS4_PA_SATAPHY_CTRL, SZ_16); + if (!phy_ctrl) { + dev_err(dev, "failed to allocate memory for SATA PHY CTRL\n"); + ret = -ENOMEM; + goto err1; + } + + clk_sata = clk_get(dev, "sata"); + if (IS_ERR(clk_sata)) { + dev_err(dev, "failed to get sata clock\n"); + ret = PTR_ERR(clk_sata); + clk_sata = NULL; + goto err2; + + } + clk_enable(clk_sata); + + clk_sataphy = clk_get(dev, "sataphy"); + if (IS_ERR(clk_sataphy)) { + dev_err(dev, "failed to get sataphy clock\n"); + ret = PTR_ERR(clk_sataphy); + clk_sataphy = NULL; + goto err3; + } + clk_enable(clk_sataphy); + + clk_sclk_sata = clk_get(dev, "sclk_sata"); + if (IS_ERR(clk_sclk_sata)) { + dev_err(dev, "failed to get sclk_sata\n"); + ret = PTR_ERR(clk_sclk_sata); + clk_sclk_sata = NULL; + goto err4; + } + clk_enable(clk_sclk_sata); + clk_set_rate(clk_sclk_sata, SCLK_SATA_FREQ); + + __raw_writel(S5P_PMU_SATA_PHY_CONTROL_EN, S5P_PMU_SATA_PHY_CONTROL); + + /* Enable PHY link control */ + val = SATA_CTRL1_RST_PMALIVE_N | SATA_CTRL1_RST_RXOOB_N | + SATA_CTRL1_RST_RX_N | SATA_CTRL1_RST_TX_N; + __raw_writel(val, phy_ctrl + SATA_CTRL1); + + /* Set communication speed as 3Gbps and enable PHY power */ + val = SATA_CTRL0_RX_DATA_VALID(3) | SATA_CTRL0_SPEED_MODE | + SATA_CTRL0_PHY_POR_N; + __raw_writel(val, phy_ctrl + SATA_CTRL0); + + /* Port0 is available */ + __raw_writel(0x1, mmio + HOST_PORTS_IMPL); + + return ahci_phy_init(mmio); + +err4: + clk_disable(clk_sataphy); + clk_put(clk_sataphy); +err3: + clk_disable(clk_sata); + clk_put(clk_sata); +err2: + iounmap(phy_ctrl); +err1: + iounmap(phy_base); + + return ret; +} + +static struct ahci_platform_data exynos4_ahci_pdata = { + .init = exynos4_ahci_init, +}; + +static struct resource exynos4_ahci_resource[] = { + [0] = { + .start = EXYNOS4_PA_SATA, + .end = EXYNOS4_PA_SATA + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SATA, + .end = IRQ_SATA, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32); + +struct platform_device exynos4_device_ahci = { + .name = "ahci", + .id = -1, + .resource = exynos4_ahci_resource, + .num_resources = ARRAY_SIZE(exynos4_ahci_resource), + .dev = { + .platform_data = &exynos4_ahci_pdata, + .dma_mask = &exynos4_ahci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; diff --git a/arch/arm/mach-s5pv310/dev-audio.c b/arch/arm/mach-exynos4/dev-audio.c index a196424..1eed5f9 100644 --- a/arch/arm/mach-s5pv310/dev-audio.c +++ b/arch/arm/mach-exynos4/dev-audio.c @@ -1,4 +1,7 @@ -/* linux/arch/arm/mach-s5pv310/dev-audio.c +/* linux/arch/arm/mach-exynos4/dev-audio.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright (c) 2010 Samsung Electronics Co. Ltd * Jaswinder Singh <jassi.brar@samsung.com> @@ -24,18 +27,18 @@ static const char *rclksrc[] = { [1] = "i2sclk", }; -static int s5pv310_cfg_i2s(struct platform_device *pdev) +static int exynos4_cfg_i2s(struct platform_device *pdev) { /* configure GPIO for i2s port */ switch (pdev->id) { case 0: - s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 7, S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 7, S3C_GPIO_SFN(2)); break; case 1: - s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(2)); + s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(2)); break; case 2: - s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(4)); + s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(4)); break; default: printk(KERN_ERR "Invalid Device %d\n", pdev->id); @@ -46,7 +49,7 @@ static int s5pv310_cfg_i2s(struct platform_device *pdev) } static struct s3c_audio_pdata i2sv5_pdata = { - .cfg_gpio = s5pv310_cfg_i2s, + .cfg_gpio = exynos4_cfg_i2s, .type = { .i2s = { .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI @@ -56,10 +59,10 @@ static struct s3c_audio_pdata i2sv5_pdata = { }, }; -static struct resource s5pv310_i2s0_resource[] = { +static struct resource exynos4_i2s0_resource[] = { [0] = { - .start = S5PV310_PA_I2S0, - .end = S5PV310_PA_I2S0 + 0x100 - 1, + .start = EXYNOS4_PA_I2S0, + .end = EXYNOS4_PA_I2S0 + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -79,11 +82,11 @@ static struct resource s5pv310_i2s0_resource[] = { }, }; -struct platform_device s5pv310_device_i2s0 = { +struct platform_device exynos4_device_i2s0 = { .name = "samsung-i2s", .id = 0, - .num_resources = ARRAY_SIZE(s5pv310_i2s0_resource), - .resource = s5pv310_i2s0_resource, + .num_resources = ARRAY_SIZE(exynos4_i2s0_resource), + .resource = exynos4_i2s0_resource, .dev = { .platform_data = &i2sv5_pdata, }, @@ -95,7 +98,7 @@ static const char *rclksrc_v3[] = { }; static struct s3c_audio_pdata i2sv3_pdata = { - .cfg_gpio = s5pv310_cfg_i2s, + .cfg_gpio = exynos4_cfg_i2s, .type = { .i2s = { .quirks = QUIRK_NO_MUXPSR, @@ -104,10 +107,10 @@ static struct s3c_audio_pdata i2sv3_pdata = { }, }; -static struct resource s5pv310_i2s1_resource[] = { +static struct resource exynos4_i2s1_resource[] = { [0] = { - .start = S5PV310_PA_I2S1, - .end = S5PV310_PA_I2S1 + 0x100 - 1, + .start = EXYNOS4_PA_I2S1, + .end = EXYNOS4_PA_I2S1 + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -122,20 +125,20 @@ static struct resource s5pv310_i2s1_resource[] = { }, }; -struct platform_device s5pv310_device_i2s1 = { +struct platform_device exynos4_device_i2s1 = { .name = "samsung-i2s", .id = 1, - .num_resources = ARRAY_SIZE(s5pv310_i2s1_resource), - .resource = s5pv310_i2s1_resource, + .num_resources = ARRAY_SIZE(exynos4_i2s1_resource), + .resource = exynos4_i2s1_resource, .dev = { .platform_data = &i2sv3_pdata, }, }; -static struct resource s5pv310_i2s2_resource[] = { +static struct resource exynos4_i2s2_resource[] = { [0] = { - .start = S5PV310_PA_I2S2, - .end = S5PV310_PA_I2S2 + 0x100 - 1, + .start = EXYNOS4_PA_I2S2, + .end = EXYNOS4_PA_I2S2 + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -150,11 +153,11 @@ static struct resource s5pv310_i2s2_resource[] = { }, }; -struct platform_device s5pv310_device_i2s2 = { +struct platform_device exynos4_device_i2s2 = { .name = "samsung-i2s", .id = 2, - .num_resources = ARRAY_SIZE(s5pv310_i2s2_resource), - .resource = s5pv310_i2s2_resource, + .num_resources = ARRAY_SIZE(exynos4_i2s2_resource), + .resource = exynos4_i2s2_resource, .dev = { .platform_data = &i2sv3_pdata, }, @@ -162,17 +165,17 @@ struct platform_device s5pv310_device_i2s2 = { /* PCM Controller platform_devices */ -static int s5pv310_pcm_cfg_gpio(struct platform_device *pdev) +static int exynos4_pcm_cfg_gpio(struct platform_device *pdev) { switch (pdev->id) { case 0: - s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 5, S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 5, S3C_GPIO_SFN(3)); break; case 1: - s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(3)); break; case 2: - s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(3)); break; default: printk(KERN_DEBUG "Invalid PCM Controller number!"); @@ -183,13 +186,13 @@ static int s5pv310_pcm_cfg_gpio(struct platform_device *pdev) } static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = s5pv310_pcm_cfg_gpio, + .cfg_gpio = exynos4_pcm_cfg_gpio, }; -static struct resource s5pv310_pcm0_resource[] = { +static struct resource exynos4_pcm0_resource[] = { [0] = { - .start = S5PV310_PA_PCM0, - .end = S5PV310_PA_PCM0 + 0x100 - 1, + .start = EXYNOS4_PA_PCM0, + .end = EXYNOS4_PA_PCM0 + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -204,20 +207,20 @@ static struct resource s5pv310_pcm0_resource[] = { }, }; -struct platform_device s5pv310_device_pcm0 = { +struct platform_device exynos4_device_pcm0 = { .name = "samsung-pcm", .id = 0, - .num_resources = ARRAY_SIZE(s5pv310_pcm0_resource), - .resource = s5pv310_pcm0_resource, + .num_resources = ARRAY_SIZE(exynos4_pcm0_resource), + .resource = exynos4_pcm0_resource, .dev = { .platform_data = &s3c_pcm_pdata, }, }; -static struct resource s5pv310_pcm1_resource[] = { +static struct resource exynos4_pcm1_resource[] = { [0] = { - .start = S5PV310_PA_PCM1, - .end = S5PV310_PA_PCM1 + 0x100 - 1, + .start = EXYNOS4_PA_PCM1, + .end = EXYNOS4_PA_PCM1 + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -232,20 +235,20 @@ static struct resource s5pv310_pcm1_resource[] = { }, }; -struct platform_device s5pv310_device_pcm1 = { +struct platform_device exynos4_device_pcm1 = { .name = "samsung-pcm", .id = 1, - .num_resources = ARRAY_SIZE(s5pv310_pcm1_resource), - .resource = s5pv310_pcm1_resource, + .num_resources = ARRAY_SIZE(exynos4_pcm1_resource), + .resource = exynos4_pcm1_resource, .dev = { .platform_data = &s3c_pcm_pdata, }, }; -static struct resource s5pv310_pcm2_resource[] = { +static struct resource exynos4_pcm2_resource[] = { [0] = { - .start = S5PV310_PA_PCM2, - .end = S5PV310_PA_PCM2 + 0x100 - 1, + .start = EXYNOS4_PA_PCM2, + .end = EXYNOS4_PA_PCM2 + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -260,11 +263,11 @@ static struct resource s5pv310_pcm2_resource[] = { }, }; -struct platform_device s5pv310_device_pcm2 = { +struct platform_device exynos4_device_pcm2 = { .name = "samsung-pcm", .id = 2, - .num_resources = ARRAY_SIZE(s5pv310_pcm2_resource), - .resource = s5pv310_pcm2_resource, + .num_resources = ARRAY_SIZE(exynos4_pcm2_resource), + .resource = exynos4_pcm2_resource, .dev = { .platform_data = &s3c_pcm_pdata, }, @@ -272,15 +275,15 @@ struct platform_device s5pv310_device_pcm2 = { /* AC97 Controller platform devices */ -static int s5pv310_ac97_cfg_gpio(struct platform_device *pdev) +static int exynos4_ac97_cfg_gpio(struct platform_device *pdev) { - return s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(4)); + return s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(4)); } -static struct resource s5pv310_ac97_resource[] = { +static struct resource exynos4_ac97_resource[] = { [0] = { - .start = S5PV310_PA_AC97, - .end = S5PV310_PA_AC97 + 0x100 - 1, + .start = EXYNOS4_PA_AC97, + .end = EXYNOS4_PA_AC97 + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -306,36 +309,36 @@ static struct resource s5pv310_ac97_resource[] = { }; static struct s3c_audio_pdata s3c_ac97_pdata = { - .cfg_gpio = s5pv310_ac97_cfg_gpio, + .cfg_gpio = exynos4_ac97_cfg_gpio, }; -static u64 s5pv310_ac97_dmamask = DMA_BIT_MASK(32); +static u64 exynos4_ac97_dmamask = DMA_BIT_MASK(32); -struct platform_device s5pv310_device_ac97 = { +struct platform_device exynos4_device_ac97 = { .name = "samsung-ac97", .id = -1, - .num_resources = ARRAY_SIZE(s5pv310_ac97_resource), - .resource = s5pv310_ac97_resource, + .num_resources = ARRAY_SIZE(exynos4_ac97_resource), + .resource = exynos4_ac97_resource, .dev = { .platform_data = &s3c_ac97_pdata, - .dma_mask = &s5pv310_ac97_dmamask, + .dma_mask = &exynos4_ac97_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, }; /* S/PDIF Controller platform_device */ -static int s5pv310_spdif_cfg_gpio(struct platform_device *pdev) +static int exynos4_spdif_cfg_gpio(struct platform_device *pdev) { - s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 2, S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(3)); return 0; } -static struct resource s5pv310_spdif_resource[] = { +static struct resource exynos4_spdif_resource[] = { [0] = { - .start = S5PV310_PA_SPDIF, - .end = S5PV310_PA_SPDIF + 0x100 - 1, + .start = EXYNOS4_PA_SPDIF, + .end = EXYNOS4_PA_SPDIF + 0x100 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -346,19 +349,19 @@ static struct resource s5pv310_spdif_resource[] = { }; static struct s3c_audio_pdata samsung_spdif_pdata = { - .cfg_gpio = s5pv310_spdif_cfg_gpio, + .cfg_gpio = exynos4_spdif_cfg_gpio, }; -static u64 s5pv310_spdif_dmamask = DMA_BIT_MASK(32); +static u64 exynos4_spdif_dmamask = DMA_BIT_MASK(32); -struct platform_device s5pv310_device_spdif = { +struct platform_device exynos4_device_spdif = { .name = "samsung-spdif", .id = -1, - .num_resources = ARRAY_SIZE(s5pv310_spdif_resource), - .resource = s5pv310_spdif_resource, + .num_resources = ARRAY_SIZE(exynos4_spdif_resource), + .resource = exynos4_spdif_resource, .dev = { .platform_data = &samsung_spdif_pdata, - .dma_mask = &s5pv310_spdif_dmamask, + .dma_mask = &exynos4_spdif_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, }; diff --git a/arch/arm/mach-s5pv310/dev-pd.c b/arch/arm/mach-exynos4/dev-pd.c index 58a50c2..3273f25 100644 --- a/arch/arm/mach-s5pv310/dev-pd.c +++ b/arch/arm/mach-exynos4/dev-pd.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/dev-pd.c +/* linux/arch/arm/mach-exynos4/dev-pd.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * S5PV310 - Power Domain support + * EXYNOS4 - Power Domain support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,7 +19,7 @@ #include <plat/pd.h> -static int s5pv310_pd_enable(struct device *dev) +static int exynos4_pd_enable(struct device *dev) { struct samsung_pd_info *pdata = dev->platform_data; u32 timeout; @@ -42,7 +42,7 @@ static int s5pv310_pd_enable(struct device *dev) return 0; } -static int s5pv310_pd_disable(struct device *dev) +static int exynos4_pd_disable(struct device *dev) { struct samsung_pd_info *pdata = dev->platform_data; u32 timeout; @@ -64,14 +64,14 @@ static int s5pv310_pd_disable(struct device *dev) return 0; } -struct platform_device s5pv310_device_pd[] = { +struct platform_device exynos4_device_pd[] = { { .name = "samsung-pd", .id = 0, .dev = { .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, .base = S5P_PMU_MFC_CONF, }, }, @@ -80,8 +80,8 @@ struct platform_device s5pv310_device_pd[] = { .id = 1, .dev = { .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, .base = S5P_PMU_G3D_CONF, }, }, @@ -90,8 +90,8 @@ struct platform_device s5pv310_device_pd[] = { .id = 2, .dev = { .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, .base = S5P_PMU_LCD0_CONF, }, }, @@ -100,8 +100,8 @@ struct platform_device s5pv310_device_pd[] = { .id = 3, .dev = { .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, .base = S5P_PMU_LCD1_CONF, }, }, @@ -110,8 +110,8 @@ struct platform_device s5pv310_device_pd[] = { .id = 4, .dev = { .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, .base = S5P_PMU_TV_CONF, }, }, @@ -120,8 +120,8 @@ struct platform_device s5pv310_device_pd[] = { .id = 5, .dev = { .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, .base = S5P_PMU_CAM_CONF, }, }, @@ -130,8 +130,8 @@ struct platform_device s5pv310_device_pd[] = { .id = 6, .dev = { .platform_data = &(struct samsung_pd_info) { - .enable = s5pv310_pd_enable, - .disable = s5pv310_pd_disable, + .enable = exynos4_pd_enable, + .disable = exynos4_pd_disable, .base = S5P_PMU_GPS_CONF, }, }, diff --git a/arch/arm/mach-s5pv310/dev-sysmmu.c b/arch/arm/mach-exynos4/dev-sysmmu.c index e1bb200..3b7cae0 100644 --- a/arch/arm/mach-s5pv310/dev-sysmmu.c +++ b/arch/arm/mach-exynos4/dev-sysmmu.c @@ -1,8 +1,10 @@ -/* linux/arch/arm/mach-s5pv310/dev-sysmmu.c +/* linux/arch/arm/mach-exynos4/dev-sysmmu.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com * + * EXYNOS4 - System MMU support + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -13,11 +15,33 @@ #include <mach/map.h> #include <mach/irqs.h> +#include <mach/sysmmu.h> +#include <plat/s5p-clock.h> + +/* These names must be equal to the clock names in mach-exynos4/clock.c */ +const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM] = { + "SYSMMU_MDMA" , + "SYSMMU_SSS" , + "SYSMMU_FIMC0" , + "SYSMMU_FIMC1" , + "SYSMMU_FIMC2" , + "SYSMMU_FIMC3" , + "SYSMMU_JPEG" , + "SYSMMU_FIMD0" , + "SYSMMU_FIMD1" , + "SYSMMU_PCIe" , + "SYSMMU_G2D" , + "SYSMMU_ROTATOR", + "SYSMMU_MDMA2" , + "SYSMMU_TV" , + "SYSMMU_MFC_L" , + "SYSMMU_MFC_R" , +}; -static struct resource s5pv310_sysmmu_resource[] = { +static struct resource exynos4_sysmmu_resource[] = { [0] = { - .start = S5PV310_PA_SYSMMU_MDMA, - .end = S5PV310_PA_SYSMMU_MDMA + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_MDMA, + .end = EXYNOS4_PA_SYSMMU_MDMA + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -26,8 +50,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [2] = { - .start = S5PV310_PA_SYSMMU_SSS, - .end = S5PV310_PA_SYSMMU_SSS + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_SSS, + .end = EXYNOS4_PA_SYSMMU_SSS + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [3] = { @@ -36,8 +60,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [4] = { - .start = S5PV310_PA_SYSMMU_FIMC0, - .end = S5PV310_PA_SYSMMU_FIMC0 + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_FIMC0, + .end = EXYNOS4_PA_SYSMMU_FIMC0 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [5] = { @@ -46,8 +70,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [6] = { - .start = S5PV310_PA_SYSMMU_FIMC1, - .end = S5PV310_PA_SYSMMU_FIMC1 + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_FIMC1, + .end = EXYNOS4_PA_SYSMMU_FIMC1 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [7] = { @@ -56,8 +80,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [8] = { - .start = S5PV310_PA_SYSMMU_FIMC2, - .end = S5PV310_PA_SYSMMU_FIMC2 + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_FIMC2, + .end = EXYNOS4_PA_SYSMMU_FIMC2 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [9] = { @@ -66,8 +90,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [10] = { - .start = S5PV310_PA_SYSMMU_FIMC3, - .end = S5PV310_PA_SYSMMU_FIMC3 + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_FIMC3, + .end = EXYNOS4_PA_SYSMMU_FIMC3 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [11] = { @@ -76,8 +100,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [12] = { - .start = S5PV310_PA_SYSMMU_JPEG, - .end = S5PV310_PA_SYSMMU_JPEG + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_JPEG, + .end = EXYNOS4_PA_SYSMMU_JPEG + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [13] = { @@ -86,8 +110,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [14] = { - .start = S5PV310_PA_SYSMMU_FIMD0, - .end = S5PV310_PA_SYSMMU_FIMD0 + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_FIMD0, + .end = EXYNOS4_PA_SYSMMU_FIMD0 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [15] = { @@ -96,8 +120,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [16] = { - .start = S5PV310_PA_SYSMMU_FIMD1, - .end = S5PV310_PA_SYSMMU_FIMD1 + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_FIMD1, + .end = EXYNOS4_PA_SYSMMU_FIMD1 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [17] = { @@ -106,8 +130,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [18] = { - .start = S5PV310_PA_SYSMMU_PCIe, - .end = S5PV310_PA_SYSMMU_PCIe + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_PCIe, + .end = EXYNOS4_PA_SYSMMU_PCIe + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [19] = { @@ -116,8 +140,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [20] = { - .start = S5PV310_PA_SYSMMU_G2D, - .end = S5PV310_PA_SYSMMU_G2D + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_G2D, + .end = EXYNOS4_PA_SYSMMU_G2D + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [21] = { @@ -126,8 +150,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [22] = { - .start = S5PV310_PA_SYSMMU_ROTATOR, - .end = S5PV310_PA_SYSMMU_ROTATOR + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_ROTATOR, + .end = EXYNOS4_PA_SYSMMU_ROTATOR + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [23] = { @@ -136,8 +160,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [24] = { - .start = S5PV310_PA_SYSMMU_MDMA2, - .end = S5PV310_PA_SYSMMU_MDMA2 + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_MDMA2, + .end = EXYNOS4_PA_SYSMMU_MDMA2 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [25] = { @@ -146,8 +170,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [26] = { - .start = S5PV310_PA_SYSMMU_TV, - .end = S5PV310_PA_SYSMMU_TV + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_TV, + .end = EXYNOS4_PA_SYSMMU_TV + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [27] = { @@ -156,8 +180,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [28] = { - .start = S5PV310_PA_SYSMMU_MFC_L, - .end = S5PV310_PA_SYSMMU_MFC_L + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_MFC_L, + .end = EXYNOS4_PA_SYSMMU_MFC_L + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [29] = { @@ -166,8 +190,8 @@ static struct resource s5pv310_sysmmu_resource[] = { .flags = IORESOURCE_IRQ, }, [30] = { - .start = S5PV310_PA_SYSMMU_MFC_R, - .end = S5PV310_PA_SYSMMU_MFC_R + SZ_64K - 1, + .start = EXYNOS4_PA_SYSMMU_MFC_R, + .end = EXYNOS4_PA_SYSMMU_MFC_R + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [31] = { @@ -177,11 +201,32 @@ static struct resource s5pv310_sysmmu_resource[] = { }, }; -struct platform_device s5pv310_device_sysmmu = { +struct platform_device exynos4_device_sysmmu = { .name = "s5p-sysmmu", .id = 32, - .num_resources = ARRAY_SIZE(s5pv310_sysmmu_resource), - .resource = s5pv310_sysmmu_resource, + .num_resources = ARRAY_SIZE(exynos4_sysmmu_resource), + .resource = exynos4_sysmmu_resource, }; +EXPORT_SYMBOL(exynos4_device_sysmmu); + +static struct clk *sysmmu_clk[S5P_SYSMMU_TOTAL_IPNUM]; +void sysmmu_clk_init(struct device *dev, sysmmu_ips ips) +{ + sysmmu_clk[ips] = clk_get(dev, sysmmu_ips_name[ips]); + if (IS_ERR(sysmmu_clk[ips])) + sysmmu_clk[ips] = NULL; + else + clk_put(sysmmu_clk[ips]); +} + +void sysmmu_clk_enable(sysmmu_ips ips) +{ + if (sysmmu_clk[ips]) + clk_enable(sysmmu_clk[ips]); +} -EXPORT_SYMBOL(s5pv310_device_sysmmu); +void sysmmu_clk_disable(sysmmu_ips ips) +{ + if (sysmmu_clk[ips]) + clk_disable(sysmmu_clk[ips]); +} diff --git a/arch/arm/mach-s5pv310/dma.c b/arch/arm/mach-exynos4/dma.c index 20066c7..564bb53 100644 --- a/arch/arm/mach-s5pv310/dma.c +++ b/arch/arm/mach-exynos4/dma.c @@ -1,4 +1,8 @@ -/* +/* linux/arch/arm/mach-exynos4/dma.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright (C) 2010 Samsung Electronics Co. Ltd. * Jaswinder Singh <jassi.brar@samsung.com> * @@ -30,10 +34,10 @@ static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5pv310_pdma0_resource[] = { +static struct resource exynos4_pdma0_resource[] = { [0] = { - .start = S5PV310_PA_PDMA0, - .end = S5PV310_PA_PDMA0 + SZ_4K, + .start = EXYNOS4_PA_PDMA0, + .end = EXYNOS4_PA_PDMA0 + SZ_4K, .flags = IORESOURCE_MEM, }, [1] = { @@ -43,7 +47,7 @@ static struct resource s5pv310_pdma0_resource[] = { }, }; -static struct s3c_pl330_platdata s5pv310_pdma0_pdata = { +static struct s3c_pl330_platdata exynos4_pdma0_pdata = { .peri = { [0] = DMACH_PCM0_RX, [1] = DMACH_PCM0_TX, @@ -80,22 +84,22 @@ static struct s3c_pl330_platdata s5pv310_pdma0_pdata = { }, }; -static struct platform_device s5pv310_device_pdma0 = { +static struct platform_device exynos4_device_pdma0 = { .name = "s3c-pl330", .id = 0, - .num_resources = ARRAY_SIZE(s5pv310_pdma0_resource), - .resource = s5pv310_pdma0_resource, + .num_resources = ARRAY_SIZE(exynos4_pdma0_resource), + .resource = exynos4_pdma0_resource, .dev = { .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv310_pdma0_pdata, + .platform_data = &exynos4_pdma0_pdata, }, }; -static struct resource s5pv310_pdma1_resource[] = { +static struct resource exynos4_pdma1_resource[] = { [0] = { - .start = S5PV310_PA_PDMA1, - .end = S5PV310_PA_PDMA1 + SZ_4K, + .start = EXYNOS4_PA_PDMA1, + .end = EXYNOS4_PA_PDMA1 + SZ_4K, .flags = IORESOURCE_MEM, }, [1] = { @@ -105,7 +109,7 @@ static struct resource s5pv310_pdma1_resource[] = { }, }; -static struct s3c_pl330_platdata s5pv310_pdma1_pdata = { +static struct s3c_pl330_platdata exynos4_pdma1_pdata = { .peri = { [0] = DMACH_PCM0_RX, [1] = DMACH_PCM0_TX, @@ -142,27 +146,27 @@ static struct s3c_pl330_platdata s5pv310_pdma1_pdata = { }, }; -static struct platform_device s5pv310_device_pdma1 = { +static struct platform_device exynos4_device_pdma1 = { .name = "s3c-pl330", .id = 1, - .num_resources = ARRAY_SIZE(s5pv310_pdma1_resource), - .resource = s5pv310_pdma1_resource, + .num_resources = ARRAY_SIZE(exynos4_pdma1_resource), + .resource = exynos4_pdma1_resource, .dev = { .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5pv310_pdma1_pdata, + .platform_data = &exynos4_pdma1_pdata, }, }; -static struct platform_device *s5pv310_dmacs[] __initdata = { - &s5pv310_device_pdma0, - &s5pv310_device_pdma1, +static struct platform_device *exynos4_dmacs[] __initdata = { + &exynos4_device_pdma0, + &exynos4_device_pdma1, }; -static int __init s5pv310_dma_init(void) +static int __init exynos4_dma_init(void) { - platform_add_devices(s5pv310_dmacs, ARRAY_SIZE(s5pv310_dmacs)); + platform_add_devices(exynos4_dmacs, ARRAY_SIZE(exynos4_dmacs)); return 0; } -arch_initcall(s5pv310_dma_init); +arch_initcall(exynos4_dma_init); diff --git a/arch/arm/mach-exynos4/gpiolib.c b/arch/arm/mach-exynos4/gpiolib.c new file mode 100644 index 0000000..d54ca6a --- /dev/null +++ b/arch/arm/mach-exynos4/gpiolib.c @@ -0,0 +1,365 @@ +/* linux/arch/arm/mach-exynos4/gpiolib.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <mach/map.h> + +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + +static struct s3c_gpio_cfg gpio_cfg = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +/* + * Following are the gpio banks in v310. + * + * The 'config' member when left to NULL, is initialized to the default + * structure gpio_cfg in the init function below. + * + * The 'base' member is also initialized in the init function below. + * Note: The initialization of 'base' member of s3c_gpio_chip structure + * uses the above macro and depends on the banks being listed in order here. + */ +static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = { + { + .chip = { + .base = EXYNOS4_GPA0(0), + .ngpio = EXYNOS4_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = EXYNOS4_GPA1(0), + .ngpio = EXYNOS4_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = EXYNOS4_GPB(0), + .ngpio = EXYNOS4_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = EXYNOS4_GPC0(0), + .ngpio = EXYNOS4_GPIO_C0_NR, + .label = "GPC0", + }, + }, { + .chip = { + .base = EXYNOS4_GPC1(0), + .ngpio = EXYNOS4_GPIO_C1_NR, + .label = "GPC1", + }, + }, { + .chip = { + .base = EXYNOS4_GPD0(0), + .ngpio = EXYNOS4_GPIO_D0_NR, + .label = "GPD0", + }, + }, { + .chip = { + .base = EXYNOS4_GPD1(0), + .ngpio = EXYNOS4_GPIO_D1_NR, + .label = "GPD1", + }, + }, { + .chip = { + .base = EXYNOS4_GPE0(0), + .ngpio = EXYNOS4_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = EXYNOS4_GPE1(0), + .ngpio = EXYNOS4_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = EXYNOS4_GPE2(0), + .ngpio = EXYNOS4_GPIO_E2_NR, + .label = "GPE2", + }, + }, { + .chip = { + .base = EXYNOS4_GPE3(0), + .ngpio = EXYNOS4_GPIO_E3_NR, + .label = "GPE3", + }, + }, { + .chip = { + .base = EXYNOS4_GPE4(0), + .ngpio = EXYNOS4_GPIO_E4_NR, + .label = "GPE4", + }, + }, { + .chip = { + .base = EXYNOS4_GPF0(0), + .ngpio = EXYNOS4_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = EXYNOS4_GPF1(0), + .ngpio = EXYNOS4_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = EXYNOS4_GPF2(0), + .ngpio = EXYNOS4_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = EXYNOS4_GPF3(0), + .ngpio = EXYNOS4_GPIO_F3_NR, + .label = "GPF3", + }, + }, +}; + +static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = { + { + .chip = { + .base = EXYNOS4_GPJ0(0), + .ngpio = EXYNOS4_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = EXYNOS4_GPJ1(0), + .ngpio = EXYNOS4_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = EXYNOS4_GPK0(0), + .ngpio = EXYNOS4_GPIO_K0_NR, + .label = "GPK0", + }, + }, { + .chip = { + .base = EXYNOS4_GPK1(0), + .ngpio = EXYNOS4_GPIO_K1_NR, + .label = "GPK1", + }, + }, { + .chip = { + .base = EXYNOS4_GPK2(0), + .ngpio = EXYNOS4_GPIO_K2_NR, + .label = "GPK2", + }, + }, { + .chip = { + .base = EXYNOS4_GPK3(0), + .ngpio = EXYNOS4_GPIO_K3_NR, + .label = "GPK3", + }, + }, { + .chip = { + .base = EXYNOS4_GPL0(0), + .ngpio = EXYNOS4_GPIO_L0_NR, + .label = "GPL0", + }, + }, { + .chip = { + .base = EXYNOS4_GPL1(0), + .ngpio = EXYNOS4_GPIO_L1_NR, + .label = "GPL1", + }, + }, { + .chip = { + .base = EXYNOS4_GPL2(0), + .ngpio = EXYNOS4_GPIO_L2_NR, + .label = "GPL2", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY0(0), + .ngpio = EXYNOS4_GPIO_Y0_NR, + .label = "GPY0", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY1(0), + .ngpio = EXYNOS4_GPIO_Y1_NR, + .label = "GPY1", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY2(0), + .ngpio = EXYNOS4_GPIO_Y2_NR, + .label = "GPY2", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY3(0), + .ngpio = EXYNOS4_GPIO_Y3_NR, + .label = "GPY3", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY4(0), + .ngpio = EXYNOS4_GPIO_Y4_NR, + .label = "GPY4", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY5(0), + .ngpio = EXYNOS4_GPIO_Y5_NR, + .label = "GPY5", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY6(0), + .ngpio = EXYNOS4_GPIO_Y6_NR, + .label = "GPY6", + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC00), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(0), + .chip = { + .base = EXYNOS4_GPX0(0), + .ngpio = EXYNOS4_GPIO_X0_NR, + .label = "GPX0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC20), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(8), + .chip = { + .base = EXYNOS4_GPX1(0), + .ngpio = EXYNOS4_GPIO_X1_NR, + .label = "GPX1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC40), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(16), + .chip = { + .base = EXYNOS4_GPX2(0), + .ngpio = EXYNOS4_GPIO_X2_NR, + .label = "GPX2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC60), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(24), + .chip = { + .base = EXYNOS4_GPX3(0), + .ngpio = EXYNOS4_GPIO_X3_NR, + .label = "GPX3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +}; + +static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = { + { + .chip = { + .base = EXYNOS4_GPZ(0), + .ngpio = EXYNOS4_GPIO_Z_NR, + .label = "GPZ", + }, + }, +}; + +static __init int exynos4_gpiolib_init(void) +{ + struct s3c_gpio_chip *chip; + int i; + int group = 0; + int nr_chips; + + /* GPIO part 1 */ + + chip = exynos4_gpio_part1_4bit; + nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) { + chip->config = &gpio_cfg; + /* Assign the GPIO interrupt group */ + chip->group = group++; + } + if (chip->base == NULL) + chip->base = S5P_VA_GPIO1 + (i) * 0x20; + } + + samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips); + + /* GPIO part 2 */ + + chip = exynos4_gpio_part2_4bit; + nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) { + chip->config = &gpio_cfg; + /* Assign the GPIO interrupt group */ + chip->group = group++; + } + if (chip->base == NULL) + chip->base = S5P_VA_GPIO2 + (i) * 0x20; + } + + samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips); + + /* GPIO part 3 */ + + chip = exynos4_gpio_part3_4bit; + nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) { + chip->config = &gpio_cfg; + /* Assign the GPIO interrupt group */ + chip->group = group++; + } + if (chip->base == NULL) + chip->base = S5P_VA_GPIO3 + (i) * 0x20; + } + + samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips); + s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS); + s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS); + + return 0; +} +core_initcall(exynos4_gpiolib_init); diff --git a/arch/arm/mach-s5pv310/headsmp.S b/arch/arm/mach-exynos4/headsmp.S index 164b7b0..6c6cfc5 100644 --- a/arch/arm/mach-s5pv310/headsmp.S +++ b/arch/arm/mach-exynos4/headsmp.S @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/headsmp.S + * linux/arch/arm/mach-exynos4/headsmp.S * * Cloned from linux/arch/arm/mach-realview/headsmp.S * @@ -16,11 +16,11 @@ __INIT /* - * s5pv310 specific entry point for secondary CPUs. This provides + * exynos4 specific entry point for secondary CPUs. This provides * a "holding pen" into which all secondary cores are held until we're * ready for them to initialise. */ -ENTRY(s5pv310_secondary_startup) +ENTRY(exynos4_secondary_startup) mrc p15, 0, r0, c0, c0, 5 and r0, r0, #15 adr r4, 1f diff --git a/arch/arm/mach-s5pv310/hotplug.c b/arch/arm/mach-exynos4/hotplug.c index c24235c..2b5909e 100644 --- a/arch/arm/mach-s5pv310/hotplug.c +++ b/arch/arm/mach-exynos4/hotplug.c @@ -1,4 +1,4 @@ -/* linux arch/arm/mach-s5pv310/hotplug.c +/* linux arch/arm/mach-exynos4/hotplug.c * * Cloned from linux/arch/arm/mach-realview/hotplug.c * @@ -30,13 +30,13 @@ static inline void cpu_enter_lowpower(void) * Turn off coherency */ " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, #0x20\n" + " bic %0, %0, %3\n" " mcr p15, 0, %0, c1, c0, 1\n" " mrc p15, 0, %0, c1, c0, 0\n" " bic %0, %0, %2\n" " mcr p15, 0, %0, c1, c0, 0\n" : "=&r" (v) - : "r" (0), "Ir" (CR_C) + : "r" (0), "Ir" (CR_C), "Ir" (0x40) : "cc"); } @@ -49,10 +49,10 @@ static inline void cpu_leave_lowpower(void) " orr %0, %0, %1\n" " mcr p15, 0, %0, c1, c0, 0\n" " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, #0x20\n" + " orr %0, %0, %2\n" " mcr p15, 0, %0, c1, c0, 1\n" : "=&r" (v) - : "Ir" (CR_C) + : "Ir" (CR_C), "Ir" (0x40) : "cc"); } diff --git a/arch/arm/mach-s5pv310/include/mach/debug-macro.S b/arch/arm/mach-exynos4/include/mach/debug-macro.S index b0d920c..58bbd04 100644 --- a/arch/arm/mach-s5pv310/include/mach/debug-macro.S +++ b/arch/arm/mach-exynos4/include/mach/debug-macro.S @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/debug-macro.S +/* linux/arch/arm/mach-exynos4/include/mach/debug-macro.S * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S * diff --git a/arch/arm/mach-s5pv310/include/mach/dma.h b/arch/arm/mach-exynos4/include/mach/dma.h index 81209eb..81209eb 100644 --- a/arch/arm/mach-s5pv310/include/mach/dma.h +++ b/arch/arm/mach-exynos4/include/mach/dma.h diff --git a/arch/arm/mach-s5pv310/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S index e600e1d..d8f38c2 100644 --- a/arch/arm/mach-s5pv310/include/mach/entry-macro.S +++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S @@ -1,8 +1,8 @@ -/* arch/arm/mach-s5pv310/include/mach/entry-macro.S +/* arch/arm/mach-exynos4/include/mach/entry-macro.S * * Cloned from arch/arm/mach-realview/include/mach/entry-macro.S * - * Low-level IRQ helper macros for S5PV310 platforms + * Low-level IRQ helper macros for EXYNOS4 platforms * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h new file mode 100644 index 0000000..939728b --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/gpio.h @@ -0,0 +1,156 @@ +/* linux/arch/arm/mach-exynos4/include/mach/gpio.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - GPIO lib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H __FILE__ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* Practically, GPIO banks upto GPZ are the configurable gpio banks */ + +/* GPIO bank sizes */ +#define EXYNOS4_GPIO_A0_NR (8) +#define EXYNOS4_GPIO_A1_NR (6) +#define EXYNOS4_GPIO_B_NR (8) +#define EXYNOS4_GPIO_C0_NR (5) +#define EXYNOS4_GPIO_C1_NR (5) +#define EXYNOS4_GPIO_D0_NR (4) +#define EXYNOS4_GPIO_D1_NR (4) +#define EXYNOS4_GPIO_E0_NR (5) +#define EXYNOS4_GPIO_E1_NR (8) +#define EXYNOS4_GPIO_E2_NR (6) +#define EXYNOS4_GPIO_E3_NR (8) +#define EXYNOS4_GPIO_E4_NR (8) +#define EXYNOS4_GPIO_F0_NR (8) +#define EXYNOS4_GPIO_F1_NR (8) +#define EXYNOS4_GPIO_F2_NR (8) +#define EXYNOS4_GPIO_F3_NR (6) +#define EXYNOS4_GPIO_J0_NR (8) +#define EXYNOS4_GPIO_J1_NR (5) +#define EXYNOS4_GPIO_K0_NR (7) +#define EXYNOS4_GPIO_K1_NR (7) +#define EXYNOS4_GPIO_K2_NR (7) +#define EXYNOS4_GPIO_K3_NR (7) +#define EXYNOS4_GPIO_L0_NR (8) +#define EXYNOS4_GPIO_L1_NR (3) +#define EXYNOS4_GPIO_L2_NR (8) +#define EXYNOS4_GPIO_X0_NR (8) +#define EXYNOS4_GPIO_X1_NR (8) +#define EXYNOS4_GPIO_X2_NR (8) +#define EXYNOS4_GPIO_X3_NR (8) +#define EXYNOS4_GPIO_Y0_NR (6) +#define EXYNOS4_GPIO_Y1_NR (4) +#define EXYNOS4_GPIO_Y2_NR (6) +#define EXYNOS4_GPIO_Y3_NR (8) +#define EXYNOS4_GPIO_Y4_NR (8) +#define EXYNOS4_GPIO_Y5_NR (8) +#define EXYNOS4_GPIO_Y6_NR (8) +#define EXYNOS4_GPIO_Z_NR (7) + +/* GPIO bank numbers */ + +#define EXYNOS4_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +enum s5p_gpio_number { + EXYNOS4_GPIO_A0_START = 0, + EXYNOS4_GPIO_A1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A0), + EXYNOS4_GPIO_B_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A1), + EXYNOS4_GPIO_C0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_B), + EXYNOS4_GPIO_C1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C0), + EXYNOS4_GPIO_D0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C1), + EXYNOS4_GPIO_D1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D0), + EXYNOS4_GPIO_E0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D1), + EXYNOS4_GPIO_E1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E0), + EXYNOS4_GPIO_E2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E1), + EXYNOS4_GPIO_E3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E2), + EXYNOS4_GPIO_E4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E3), + EXYNOS4_GPIO_F0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E4), + EXYNOS4_GPIO_F1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F0), + EXYNOS4_GPIO_F2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F1), + EXYNOS4_GPIO_F3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F2), + EXYNOS4_GPIO_J0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F3), + EXYNOS4_GPIO_J1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J0), + EXYNOS4_GPIO_K0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J1), + EXYNOS4_GPIO_K1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K0), + EXYNOS4_GPIO_K2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K1), + EXYNOS4_GPIO_K3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K2), + EXYNOS4_GPIO_L0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K3), + EXYNOS4_GPIO_L1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L0), + EXYNOS4_GPIO_L2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L1), + EXYNOS4_GPIO_X0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L2), + EXYNOS4_GPIO_X1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X0), + EXYNOS4_GPIO_X2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X1), + EXYNOS4_GPIO_X3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X2), + EXYNOS4_GPIO_Y0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X3), + EXYNOS4_GPIO_Y1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y0), + EXYNOS4_GPIO_Y2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y1), + EXYNOS4_GPIO_Y3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y2), + EXYNOS4_GPIO_Y4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y3), + EXYNOS4_GPIO_Y5_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y4), + EXYNOS4_GPIO_Y6_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y5), + EXYNOS4_GPIO_Z_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y6), +}; + +/* EXYNOS4 GPIO number definitions */ +#define EXYNOS4_GPA0(_nr) (EXYNOS4_GPIO_A0_START + (_nr)) +#define EXYNOS4_GPA1(_nr) (EXYNOS4_GPIO_A1_START + (_nr)) +#define EXYNOS4_GPB(_nr) (EXYNOS4_GPIO_B_START + (_nr)) +#define EXYNOS4_GPC0(_nr) (EXYNOS4_GPIO_C0_START + (_nr)) +#define EXYNOS4_GPC1(_nr) (EXYNOS4_GPIO_C1_START + (_nr)) +#define EXYNOS4_GPD0(_nr) (EXYNOS4_GPIO_D0_START + (_nr)) +#define EXYNOS4_GPD1(_nr) (EXYNOS4_GPIO_D1_START + (_nr)) +#define EXYNOS4_GPE0(_nr) (EXYNOS4_GPIO_E0_START + (_nr)) +#define EXYNOS4_GPE1(_nr) (EXYNOS4_GPIO_E1_START + (_nr)) +#define EXYNOS4_GPE2(_nr) (EXYNOS4_GPIO_E2_START + (_nr)) +#define EXYNOS4_GPE3(_nr) (EXYNOS4_GPIO_E3_START + (_nr)) +#define EXYNOS4_GPE4(_nr) (EXYNOS4_GPIO_E4_START + (_nr)) +#define EXYNOS4_GPF0(_nr) (EXYNOS4_GPIO_F0_START + (_nr)) +#define EXYNOS4_GPF1(_nr) (EXYNOS4_GPIO_F1_START + (_nr)) +#define EXYNOS4_GPF2(_nr) (EXYNOS4_GPIO_F2_START + (_nr)) +#define EXYNOS4_GPF3(_nr) (EXYNOS4_GPIO_F3_START + (_nr)) +#define EXYNOS4_GPJ0(_nr) (EXYNOS4_GPIO_J0_START + (_nr)) +#define EXYNOS4_GPJ1(_nr) (EXYNOS4_GPIO_J1_START + (_nr)) +#define EXYNOS4_GPK0(_nr) (EXYNOS4_GPIO_K0_START + (_nr)) +#define EXYNOS4_GPK1(_nr) (EXYNOS4_GPIO_K1_START + (_nr)) +#define EXYNOS4_GPK2(_nr) (EXYNOS4_GPIO_K2_START + (_nr)) +#define EXYNOS4_GPK3(_nr) (EXYNOS4_GPIO_K3_START + (_nr)) +#define EXYNOS4_GPL0(_nr) (EXYNOS4_GPIO_L0_START + (_nr)) +#define EXYNOS4_GPL1(_nr) (EXYNOS4_GPIO_L1_START + (_nr)) +#define EXYNOS4_GPL2(_nr) (EXYNOS4_GPIO_L2_START + (_nr)) +#define EXYNOS4_GPX0(_nr) (EXYNOS4_GPIO_X0_START + (_nr)) +#define EXYNOS4_GPX1(_nr) (EXYNOS4_GPIO_X1_START + (_nr)) +#define EXYNOS4_GPX2(_nr) (EXYNOS4_GPIO_X2_START + (_nr)) +#define EXYNOS4_GPX3(_nr) (EXYNOS4_GPIO_X3_START + (_nr)) +#define EXYNOS4_GPY0(_nr) (EXYNOS4_GPIO_Y0_START + (_nr)) +#define EXYNOS4_GPY1(_nr) (EXYNOS4_GPIO_Y1_START + (_nr)) +#define EXYNOS4_GPY2(_nr) (EXYNOS4_GPIO_Y2_START + (_nr)) +#define EXYNOS4_GPY3(_nr) (EXYNOS4_GPIO_Y3_START + (_nr)) +#define EXYNOS4_GPY4(_nr) (EXYNOS4_GPIO_Y4_START + (_nr)) +#define EXYNOS4_GPY5(_nr) (EXYNOS4_GPIO_Y5_START + (_nr)) +#define EXYNOS4_GPY6(_nr) (EXYNOS4_GPIO_Y6_START + (_nr)) +#define EXYNOS4_GPZ(_nr) (EXYNOS4_GPIO_Z_START + (_nr)) + +/* the end of the EXYNOS4 specific gpios */ +#define EXYNOS4_GPIO_END (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + 1) +#define S3C_GPIO_END EXYNOS4_GPIO_END + +/* define the number of gpios we need to the one after the GPZ() range */ +#define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \ + CONFIG_SAMSUNG_GPIO_EXTRA + 1) + +#include <asm-generic/gpio.h> + +#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/hardware.h b/arch/arm/mach-exynos4/include/mach/hardware.h index 28ff988..5109eb2 100644 --- a/arch/arm/mach-s5pv310/include/mach/hardware.h +++ b/arch/arm/mach-exynos4/include/mach/hardware.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/hardware.h +/* linux/arch/arm/mach-exynos4/include/mach/hardware.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - Hardware support + * EXYNOS4 - Hardware support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5pv310/include/mach/io.h b/arch/arm/mach-exynos4/include/mach/io.h index 8a7f912..d5478d2 100644 --- a/arch/arm/mach-s5pv310/include/mach/io.h +++ b/arch/arm/mach-exynos4/include/mach/io.h @@ -1,13 +1,13 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/io.h +/* linux/arch/arm/mach-exynos4/include/mach/io.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org> * * Based on arch/arm/mach-s5p6442/include/mach/io.h * - * Default IO routines for S5PV310 + * Default IO routines for EXYNOS4 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5pv310/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h index 536b0b5..5d03730 100644 --- a/arch/arm/mach-s5pv310/include/mach/irqs.h +++ b/arch/arm/mach-exynos4/include/mach/irqs.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/irqs.h +/* linux/arch/arm/mach-exynos4/include/mach/irqs.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - IRQ definitions + * EXYNOS4 - IRQ definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -85,6 +85,9 @@ #define IRQ_RTC_ALARM COMBINER_IRQ(23, 0) #define IRQ_RTC_TIC COMBINER_IRQ(23, 1) +#define IRQ_GPIO_XB COMBINER_IRQ(24, 0) +#define IRQ_GPIO_XA COMBINER_IRQ(24, 1) + #define IRQ_UART0 COMBINER_IRQ(26, 0) #define IRQ_UART1 COMBINER_IRQ(26, 1) #define IRQ_UART2 COMBINER_IRQ(26, 2) @@ -108,6 +111,11 @@ #define IRQ_MIPI_CSIS0 COMBINER_IRQ(30, 0) #define IRQ_MIPI_CSIS1 COMBINER_IRQ(30, 1) +#define IRQ_FIMC0 COMBINER_IRQ(32, 0) +#define IRQ_FIMC1 COMBINER_IRQ(32, 1) +#define IRQ_FIMC2 COMBINER_IRQ(33, 0) +#define IRQ_FIMC3 COMBINER_IRQ(33, 1) + #define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0) #define IRQ_MCT_L1 COMBINER_IRQ(35, 3) @@ -131,6 +139,7 @@ #define IRQ_MCT_L0 COMBINER_IRQ(51, 0) #define IRQ_WDT COMBINER_IRQ(53, 0) +#define IRQ_MCT_G0 COMBINER_IRQ(53, 4) #define MAX_COMBINER_NR 54 @@ -139,8 +148,13 @@ #define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE + 0) #define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE + 16) -/* Set the default NR_IRQS */ +/* optional GPIO interrupts */ +#define S5P_GPIOINT_BASE (S5P_IRQ_EINT_BASE + 32) +#define IRQ_GPIO1_NR_GROUPS 16 +#define IRQ_GPIO2_NR_GROUPS 9 +#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT) -#define NR_IRQS (S5P_IRQ_EINT_BASE + 32) +/* Set the default NR_IRQS */ +#define NR_IRQS (IRQ_GPIO_END) #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h new file mode 100644 index 0000000..6330b73 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/map.h @@ -0,0 +1,162 @@ +/* linux/arch/arm/mach-exynos4/include/mach/map.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * EXYNOS4 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H __FILE__ + +#include <plat/map-base.h> + +/* + * EXYNOS4 UART offset is 0x10000 but the older S5P SoCs are 0x400. + * So need to define it, and here is to avoid redefinition warning. + */ +#define S3C_UART_OFFSET (0x10000) + +#include <plat/map-s5p.h> + +#define EXYNOS4_PA_SYSRAM 0x02020000 + +#define EXYNOS4_PA_FIMC0 0x11800000 +#define EXYNOS4_PA_FIMC1 0x11810000 +#define EXYNOS4_PA_FIMC2 0x11820000 +#define EXYNOS4_PA_FIMC3 0x11830000 + +#define EXYNOS4_PA_I2S0 0x03830000 +#define EXYNOS4_PA_I2S1 0xE3100000 +#define EXYNOS4_PA_I2S2 0xE2A00000 + +#define EXYNOS4_PA_PCM0 0x03840000 +#define EXYNOS4_PA_PCM1 0x13980000 +#define EXYNOS4_PA_PCM2 0x13990000 + +#define EXYNOS4_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000)) + +#define EXYNOS4_PA_ONENAND 0x0C000000 +#define EXYNOS4_PA_ONENAND_DMA 0x0C600000 + +#define EXYNOS4_PA_CHIPID 0x10000000 + +#define EXYNOS4_PA_SYSCON 0x10010000 +#define EXYNOS4_PA_PMU 0x10020000 +#define EXYNOS4_PA_CMU 0x10030000 + +#define EXYNOS4_PA_SYSTIMER 0x10050000 +#define EXYNOS4_PA_WATCHDOG 0x10060000 +#define EXYNOS4_PA_RTC 0x10070000 + +#define EXYNOS4_PA_KEYPAD 0x100A0000 + +#define EXYNOS4_PA_DMC0 0x10400000 + +#define EXYNOS4_PA_COMBINER 0x10448000 + +#define EXYNOS4_PA_COREPERI 0x10500000 +#define EXYNOS4_PA_GIC_CPU 0x10500100 +#define EXYNOS4_PA_TWD 0x10500600 +#define EXYNOS4_PA_GIC_DIST 0x10501000 +#define EXYNOS4_PA_L2CC 0x10502000 + +#define EXYNOS4_PA_MDMA 0x10810000 +#define EXYNOS4_PA_PDMA0 0x12680000 +#define EXYNOS4_PA_PDMA1 0x12690000 + +#define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000 +#define EXYNOS4_PA_SYSMMU_SSS 0x10A50000 +#define EXYNOS4_PA_SYSMMU_FIMC0 0x11A20000 +#define EXYNOS4_PA_SYSMMU_FIMC1 0x11A30000 +#define EXYNOS4_PA_SYSMMU_FIMC2 0x11A40000 +#define EXYNOS4_PA_SYSMMU_FIMC3 0x11A50000 +#define EXYNOS4_PA_SYSMMU_JPEG 0x11A60000 +#define EXYNOS4_PA_SYSMMU_FIMD0 0x11E20000 +#define EXYNOS4_PA_SYSMMU_FIMD1 0x12220000 +#define EXYNOS4_PA_SYSMMU_PCIe 0x12620000 +#define EXYNOS4_PA_SYSMMU_G2D 0x12A20000 +#define EXYNOS4_PA_SYSMMU_ROTATOR 0x12A30000 +#define EXYNOS4_PA_SYSMMU_MDMA2 0x12A40000 +#define EXYNOS4_PA_SYSMMU_TV 0x12E20000 +#define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000 +#define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000 + +#define EXYNOS4_PA_GPIO1 0x11400000 +#define EXYNOS4_PA_GPIO2 0x11000000 +#define EXYNOS4_PA_GPIO3 0x03860000 + +#define EXYNOS4_PA_MIPI_CSIS0 0x11880000 +#define EXYNOS4_PA_MIPI_CSIS1 0x11890000 + +#define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) + +#define EXYNOS4_PA_SATA 0x12560000 +#define EXYNOS4_PA_SATAPHY 0x125D0000 +#define EXYNOS4_PA_SATAPHY_CTRL 0x126B0000 + +#define EXYNOS4_PA_SROMC 0x12570000 + +#define EXYNOS4_PA_UART 0x13800000 + +#define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) + +#define EXYNOS4_PA_AC97 0x139A0000 + +#define EXYNOS4_PA_SPDIF 0x139B0000 + +#define EXYNOS4_PA_TIMER 0x139D0000 + +#define EXYNOS4_PA_SDRAM 0x40000000 + +/* Compatibiltiy Defines */ + +#define S3C_PA_HSMMC0 EXYNOS4_PA_HSMMC(0) +#define S3C_PA_HSMMC1 EXYNOS4_PA_HSMMC(1) +#define S3C_PA_HSMMC2 EXYNOS4_PA_HSMMC(2) +#define S3C_PA_HSMMC3 EXYNOS4_PA_HSMMC(3) +#define S3C_PA_IIC EXYNOS4_PA_IIC(0) +#define S3C_PA_IIC1 EXYNOS4_PA_IIC(1) +#define S3C_PA_IIC2 EXYNOS4_PA_IIC(2) +#define S3C_PA_IIC3 EXYNOS4_PA_IIC(3) +#define S3C_PA_IIC4 EXYNOS4_PA_IIC(4) +#define S3C_PA_IIC5 EXYNOS4_PA_IIC(5) +#define S3C_PA_IIC6 EXYNOS4_PA_IIC(6) +#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7) +#define S3C_PA_RTC EXYNOS4_PA_RTC +#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG + +#define S5P_PA_CHIPID EXYNOS4_PA_CHIPID +#define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0 +#define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1 +#define S5P_PA_FIMC2 EXYNOS4_PA_FIMC2 +#define S5P_PA_FIMC3 EXYNOS4_PA_FIMC3 +#define S5P_PA_MIPI_CSIS0 EXYNOS4_PA_MIPI_CSIS0 +#define S5P_PA_MIPI_CSIS1 EXYNOS4_PA_MIPI_CSIS1 +#define S5P_PA_ONENAND EXYNOS4_PA_ONENAND +#define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA +#define S5P_PA_SDRAM EXYNOS4_PA_SDRAM +#define S5P_PA_SROMC EXYNOS4_PA_SROMC +#define S5P_PA_SYSCON EXYNOS4_PA_SYSCON +#define S5P_PA_TIMER EXYNOS4_PA_TIMER + +#define SAMSUNG_PA_KEYPAD EXYNOS4_PA_KEYPAD + +/* UART */ + +#define S3C_PA_UART EXYNOS4_PA_UART + +#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) +#define S5P_PA_UART0 S5P_PA_UART(0) +#define S5P_PA_UART1 S5P_PA_UART(1) +#define S5P_PA_UART2 S5P_PA_UART(2) +#define S5P_PA_UART3 S5P_PA_UART(3) +#define S5P_PA_UART4 S5P_PA_UART(4) + +#define S5P_SZ_UART SZ_256 + +#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/memory.h b/arch/arm/mach-exynos4/include/mach/memory.h index 1dffb48..39b47d0 100644 --- a/arch/arm/mach-s5pv310/include/mach/memory.h +++ b/arch/arm/mach-exynos4/include/mach/memory.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/memory.h +/* linux/arch/arm/mach-exynos4/include/mach/memory.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - Memory definitions + * EXYNOS4 - Memory definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-exynos4/include/mach/pm-core.h b/arch/arm/mach-exynos4/include/mach/pm-core.h new file mode 100644 index 0000000..f26e46b --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/pm-core.h @@ -0,0 +1,49 @@ +/* linux/arch/arm/mach-exynos4/include/mach/pm-core.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h, + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * EXYNOS4210 - PM core support for arch/arm/plat-s5p/pm.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ +#include <mach/regs-pmu.h> + +static inline void s3c_pm_debug_init_uart(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_prepare_irqs(void) +{ + unsigned int tmp; + tmp = __raw_readl(S5P_WAKEUP_MASK); + tmp &= ~(1 << 31); + __raw_writel(tmp, S5P_WAKEUP_MASK); + + __raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK); + __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); +} + +static inline void s3c_pm_arch_stop_clocks(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_show_resume_irqs(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save) +{ + /* nothing here yet */ +} diff --git a/arch/arm/mach-s5pv310/include/mach/pwm-clock.h b/arch/arm/mach-exynos4/include/mach/pwm-clock.h index 7e6da27..8e12090 100644 --- a/arch/arm/mach-s5pv310/include/mach/pwm-clock.h +++ b/arch/arm/mach-exynos4/include/mach/pwm-clock.h @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/pwm-clock.h +/* linux/arch/arm/mach-exynos4/include/mach/pwm-clock.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics @@ -10,7 +10,7 @@ * * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h * - * S5PV310 - pwm clock and timer support + * EXYNOS4 - pwm clock and timer support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5pv310/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h index b5c4ada..6e311c1 100644 --- a/arch/arm/mach-s5pv310/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-clock.h +/* linux/arch/arm/mach-exynos4/include/mach/regs-clock.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - Clock register definitions + * EXYNOS4 - Clock register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -17,13 +17,13 @@ #define S5P_CLKREG(x) (S5P_VA_CMU + (x)) -#define S5P_INFORM0 S5P_CLKREG(0x800) - #define S5P_CLKDIV_LEFTBUS S5P_CLKREG(0x04500) #define S5P_CLKDIV_STAT_LEFTBUS S5P_CLKREG(0x04600) +#define S5P_CLKGATE_IP_LEFTBUS S5P_CLKREG(0x04800) #define S5P_CLKDIV_RIGHTBUS S5P_CLKREG(0x08500) #define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600) +#define S5P_CLKGATE_IP_RIGHTBUS S5P_CLKREG(0x08800) #define S5P_EPLL_CON0 S5P_CLKREG(0x0C110) #define S5P_EPLL_CON1 S5P_CLKREG(0x0C114) @@ -33,18 +33,24 @@ #define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210) #define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214) #define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220) +#define S5P_CLKSRC_MFC S5P_CLKREG(0x0C228) #define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230) #define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234) #define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) +#define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C) #define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240) #define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250) #define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254) #define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510) #define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520) +#define S5P_CLKDIV_TV S5P_CLKREG(0x0C524) +#define S5P_CLKDIV_MFC S5P_CLKREG(0x0C528) +#define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C) #define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530) #define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534) #define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538) +#define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C) #define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540) #define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544) #define S5P_CLKDIV_FSYS2 S5P_CLKREG(0x0C548) @@ -58,25 +64,36 @@ #define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) #define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) +#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324) #define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334) #define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338) +#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C) #define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340) #define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350) #define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354) #define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610) +#define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820) #define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920) +#define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924) +#define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928) +#define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C) #define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930) #define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934) #define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938) #define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940) +#define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C) #define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950) #define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960) +#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970) +#define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300) #define S5P_CLKSRC_DMC S5P_CLKREG(0x10200) #define S5P_CLKDIV_DMC0 S5P_CLKREG(0x10500) +#define S5P_CLKDIV_DMC1 S5P_CLKREG(0x10504) #define S5P_CLKDIV_STAT_DMC0 S5P_CLKREG(0x10600) +#define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900) #define S5P_APLL_LOCK S5P_CLKREG(0x14000) #define S5P_MPLL_LOCK S5P_CLKREG(0x14004) @@ -94,21 +111,18 @@ #define S5P_CLKDIV_STATCPU1 S5P_CLKREG(0x14604) #define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800) +#define S5P_CLKGATE_IP_CPU S5P_CLKREG(0x14900) -/* APLL_LOCK */ #define S5P_APLL_LOCKTIME (0x1C20) /* 300us */ -/* APLL_CON0 */ #define S5P_APLLCON0_ENABLE_SHIFT (31) #define S5P_APLLCON0_LOCKED_SHIFT (29) #define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1) #define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1) -/* CLK_SRC_CPU */ #define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16) #define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT) -/* CLKDIV_CPU0 */ #define S5P_CLKDIV_CPU0_CORE_SHIFT (0) #define S5P_CLKDIV_CPU0_CORE_MASK (0x7 << S5P_CLKDIV_CPU0_CORE_SHIFT) #define S5P_CLKDIV_CPU0_COREM0_SHIFT (4) @@ -124,7 +138,6 @@ #define S5P_CLKDIV_CPU0_APLL_SHIFT (24) #define S5P_CLKDIV_CPU0_APLL_MASK (0x7 << S5P_CLKDIV_CPU0_APLL_SHIFT) -/* CLKDIV_DMC0 */ #define S5P_CLKDIV_DMC0_ACP_SHIFT (0) #define S5P_CLKDIV_DMC0_ACP_MASK (0x7 << S5P_CLKDIV_DMC0_ACP_SHIFT) #define S5P_CLKDIV_DMC0_ACPPCLK_SHIFT (4) @@ -142,7 +155,6 @@ #define S5P_CLKDIV_DMC0_CORETI_SHIFT (28) #define S5P_CLKDIV_DMC0_CORETI_MASK (0x7 << S5P_CLKDIV_DMC0_CORETI_SHIFT) -/* CLKDIV_TOP */ #define S5P_CLKDIV_TOP_ACLK200_SHIFT (0) #define S5P_CLKDIV_TOP_ACLK200_MASK (0x7 << S5P_CLKDIV_TOP_ACLK200_SHIFT) #define S5P_CLKDIV_TOP_ACLK100_SHIFT (4) @@ -154,13 +166,14 @@ #define S5P_CLKDIV_TOP_ONENAND_SHIFT (16) #define S5P_CLKDIV_TOP_ONENAND_MASK (0x7 << S5P_CLKDIV_TOP_ONENAND_SHIFT) -/* CLKDIV_LEFTBUS / CLKDIV_RIGHTBUS*/ #define S5P_CLKDIV_BUS_GDLR_SHIFT (0) #define S5P_CLKDIV_BUS_GDLR_MASK (0x7 << S5P_CLKDIV_BUS_GDLR_SHIFT) #define S5P_CLKDIV_BUS_GPLR_SHIFT (4) #define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT) -/* Compatibility defines */ +/* Compatibility defines and inclusion */ + +#include <mach/regs-pmu.h> #define S5P_EPLL_CON S5P_EPLL_CON0 diff --git a/arch/arm/mach-exynos4/include/mach/regs-gpio.h b/arch/arm/mach-exynos4/include/mach/regs-gpio.h new file mode 100644 index 0000000..1401b21 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/regs-gpio.h @@ -0,0 +1,42 @@ +/* linux/arch/arm/mach-exynos4/include/mach/regs-gpio.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - GPIO (including EINT) register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_GPIO_H +#define __ASM_ARCH_REGS_GPIO_H __FILE__ + +#include <mach/map.h> +#include <mach/irqs.h> + +#define EXYNOS4_EINT40CON (S5P_VA_GPIO2 + 0xE00) +#define S5P_EINT_CON(x) (EXYNOS4_EINT40CON + ((x) * 0x4)) + +#define EXYNOS4_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80) +#define S5P_EINT_FLTCON(x) (EXYNOS4_EINT40FLTCON0 + ((x) * 0x4)) + +#define EXYNOS4_EINT40MASK (S5P_VA_GPIO2 + 0xF00) +#define S5P_EINT_MASK(x) (EXYNOS4_EINT40MASK + ((x) * 0x4)) + +#define EXYNOS4_EINT40PEND (S5P_VA_GPIO2 + 0xF40) +#define S5P_EINT_PEND(x) (EXYNOS4_EINT40PEND + ((x) * 0x4)) + +#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) + +#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) + +#define EINT_MODE S3C_GPIO_SFN(0xf) + +#define EINT_GPIO_0(x) EXYNOS4_GPX0(x) +#define EINT_GPIO_1(x) EXYNOS4_GPX1(x) +#define EINT_GPIO_2(x) EXYNOS4_GPX2(x) +#define EINT_GPIO_3(x) EXYNOS4_GPX3(x) + +#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-irq.h b/arch/arm/mach-exynos4/include/mach/regs-irq.h index c6e09c7..9c7b4bf 100644 --- a/arch/arm/mach-s5pv310/include/mach/regs-irq.h +++ b/arch/arm/mach-exynos4/include/mach/regs-irq.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-irq.h +/* linux/arch/arm/mach-exynos4/include/mach/regs-irq.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - IRQ register definitions + * EXYNOS4 - IRQ register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-exynos4/include/mach/regs-mct.h b/arch/arm/mach-exynos4/include/mach/regs-mct.h new file mode 100644 index 0000000..ca9c843 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/regs-mct.h @@ -0,0 +1,52 @@ +/* arch/arm/mach-exynos4/include/mach/regs-mct.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 MCT configutation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_MCT_H +#define __ASM_ARCH_REGS_MCT_H __FILE__ + +#include <mach/map.h> + +#define EXYNOS4_MCTREG(x) (S5P_VA_SYSTIMER + (x)) + +#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100) +#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104) +#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110) + +#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200) +#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204) +#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208) + +#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240) + +#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244) +#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248) +#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C) + +#define EXYNOS4_MCT_L0_BASE EXYNOS4_MCTREG(0x300) +#define EXYNOS4_MCT_L1_BASE EXYNOS4_MCTREG(0x400) + +#define MCT_L_TCNTB_OFFSET (0x00) +#define MCT_L_ICNTB_OFFSET (0x08) +#define MCT_L_TCON_OFFSET (0x20) +#define MCT_L_INT_CSTAT_OFFSET (0x30) +#define MCT_L_INT_ENB_OFFSET (0x34) +#define MCT_L_WSTAT_OFFSET (0x40) + +#define MCT_G_TCON_START (1 << 8) +#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1) +#define MCT_G_TCON_COMP0_ENABLE (1 << 0) + +#define MCT_L_TCON_INTERVAL_MODE (1 << 2) +#define MCT_L_TCON_INT_START (1 << 1) +#define MCT_L_TCON_TIMER_START (1 << 0) + +#endif /* __ASM_ARCH_REGS_MCT_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-mem.h b/arch/arm/mach-exynos4/include/mach/regs-mem.h index 8342271..0368b5a 100644 --- a/arch/arm/mach-s5pv310/include/mach/regs-mem.h +++ b/arch/arm/mach-exynos4/include/mach/regs-mem.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-mem.h +/* linux/arch/arm/mach-exynos4/include/mach/regs-mem.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * S5PV310 - SROMC and DMC register definitions + * EXYNOS4 - SROMC and DMC register definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h new file mode 100644 index 0000000..62b0014 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h @@ -0,0 +1,162 @@ +/* linux/arch/arm/mach-exynos4/include/mach/regs-pmu.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - Power management unit definition + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_PMU_H +#define __ASM_ARCH_REGS_PMU_H __FILE__ + +#include <mach/map.h> + +#define S5P_PMUREG(x) (S5P_VA_PMU + (x)) + +#define S5P_CENTRAL_SEQ_CONFIGURATION S5P_PMUREG(0x0200) + +#define S5P_CENTRAL_LOWPWR_CFG (1 << 16) + +#define S5P_CENTRAL_SEQ_OPTION S5P_PMUREG(0x0208) + +#define S5P_USE_STANDBY_WFI0 (1 << 16) +#define S5P_USE_STANDBY_WFI1 (1 << 17) +#define S5P_USE_STANDBY_WFE0 (1 << 24) +#define S5P_USE_STANDBY_WFE1 (1 << 25) +#define S5P_USE_MASK ((0x3 << 16) | (0x3 << 24)) + +#define S5P_WAKEUP_STAT S5P_PMUREG(0x0600) +#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604) +#define S5P_WAKEUP_MASK S5P_PMUREG(0x0608) + +#define S5P_MIPI_DPHY_CONTROL(n) S5P_PMUREG(0x0710 + (n) * 4) +#define S5P_MIPI_DPHY_ENABLE (1 << 0) +#define S5P_MIPI_DPHY_SRESETN (1 << 1) +#define S5P_MIPI_DPHY_MRESETN (1 << 2) + +#define S5P_PMU_SATA_PHY_CONTROL S5P_PMUREG(0x0720) +#define S5P_INFORM0 S5P_PMUREG(0x0800) +#define S5P_INFORM1 S5P_PMUREG(0x0804) +#define S5P_INFORM2 S5P_PMUREG(0x0808) +#define S5P_INFORM3 S5P_PMUREG(0x080C) +#define S5P_INFORM4 S5P_PMUREG(0x0810) +#define S5P_INFORM5 S5P_PMUREG(0x0814) +#define S5P_INFORM6 S5P_PMUREG(0x0818) +#define S5P_INFORM7 S5P_PMUREG(0x081C) + +#define S5P_ARM_CORE0_LOWPWR S5P_PMUREG(0x1000) +#define S5P_DIS_IRQ_CORE0 S5P_PMUREG(0x1004) +#define S5P_DIS_IRQ_CENTRAL0 S5P_PMUREG(0x1008) +#define S5P_ARM_CORE1_LOWPWR S5P_PMUREG(0x1010) +#define S5P_DIS_IRQ_CORE1 S5P_PMUREG(0x1014) +#define S5P_DIS_IRQ_CENTRAL1 S5P_PMUREG(0x1018) +#define S5P_ARM_COMMON_LOWPWR S5P_PMUREG(0x1080) +#define S5P_L2_0_LOWPWR S5P_PMUREG(0x10C0) +#define S5P_L2_1_LOWPWR S5P_PMUREG(0x10C4) +#define S5P_CMU_ACLKSTOP_LOWPWR S5P_PMUREG(0x1100) +#define S5P_CMU_SCLKSTOP_LOWPWR S5P_PMUREG(0x1104) +#define S5P_CMU_RESET_LOWPWR S5P_PMUREG(0x110C) +#define S5P_APLL_SYSCLK_LOWPWR S5P_PMUREG(0x1120) +#define S5P_MPLL_SYSCLK_LOWPWR S5P_PMUREG(0x1124) +#define S5P_VPLL_SYSCLK_LOWPWR S5P_PMUREG(0x1128) +#define S5P_EPLL_SYSCLK_LOWPWR S5P_PMUREG(0x112C) +#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR S5P_PMUREG(0x1138) +#define S5P_CMU_RESET_GPSALIVE_LOWPWR S5P_PMUREG(0x113C) +#define S5P_CMU_CLKSTOP_CAM_LOWPWR S5P_PMUREG(0x1140) +#define S5P_CMU_CLKSTOP_TV_LOWPWR S5P_PMUREG(0x1144) +#define S5P_CMU_CLKSTOP_MFC_LOWPWR S5P_PMUREG(0x1148) +#define S5P_CMU_CLKSTOP_G3D_LOWPWR S5P_PMUREG(0x114C) +#define S5P_CMU_CLKSTOP_LCD0_LOWPWR S5P_PMUREG(0x1150) +#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154) +#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR S5P_PMUREG(0x1158) +#define S5P_CMU_CLKSTOP_GPS_LOWPWR S5P_PMUREG(0x115C) +#define S5P_CMU_RESET_CAM_LOWPWR S5P_PMUREG(0x1160) +#define S5P_CMU_RESET_TV_LOWPWR S5P_PMUREG(0x1164) +#define S5P_CMU_RESET_MFC_LOWPWR S5P_PMUREG(0x1168) +#define S5P_CMU_RESET_G3D_LOWPWR S5P_PMUREG(0x116C) +#define S5P_CMU_RESET_LCD0_LOWPWR S5P_PMUREG(0x1170) +#define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174) +#define S5P_CMU_RESET_MAUDIO_LOWPWR S5P_PMUREG(0x1178) +#define S5P_CMU_RESET_GPS_LOWPWR S5P_PMUREG(0x117C) +#define S5P_TOP_BUS_LOWPWR S5P_PMUREG(0x1180) +#define S5P_TOP_RETENTION_LOWPWR S5P_PMUREG(0x1184) +#define S5P_TOP_PWR_LOWPWR S5P_PMUREG(0x1188) +#define S5P_LOGIC_RESET_LOWPWR S5P_PMUREG(0x11A0) +#define S5P_ONENAND_MEM_LOWPWR S5P_PMUREG(0x11C0) +#define S5P_MODIMIF_MEM_LOWPWR S5P_PMUREG(0x11C4) +#define S5P_G2D_ACP_MEM_LOWPWR S5P_PMUREG(0x11C8) +#define S5P_USBOTG_MEM_LOWPWR S5P_PMUREG(0x11CC) +#define S5P_HSMMC_MEM_LOWPWR S5P_PMUREG(0x11D0) +#define S5P_CSSYS_MEM_LOWPWR S5P_PMUREG(0x11D4) +#define S5P_SECSS_MEM_LOWPWR S5P_PMUREG(0x11D8) +#define S5P_PCIE_MEM_LOWPWR S5P_PMUREG(0x11E0) +#define S5P_SATA_MEM_LOWPWR S5P_PMUREG(0x11E4) +#define S5P_PAD_RETENTION_DRAM_LOWPWR S5P_PMUREG(0x1200) +#define S5P_PAD_RETENTION_MAUDIO_LOWPWR S5P_PMUREG(0x1204) +#define S5P_PAD_RETENTION_GPIO_LOWPWR S5P_PMUREG(0x1220) +#define S5P_PAD_RETENTION_UART_LOWPWR S5P_PMUREG(0x1224) +#define S5P_PAD_RETENTION_MMCA_LOWPWR S5P_PMUREG(0x1228) +#define S5P_PAD_RETENTION_MMCB_LOWPWR S5P_PMUREG(0x122C) +#define S5P_PAD_RETENTION_EBIA_LOWPWR S5P_PMUREG(0x1230) +#define S5P_PAD_RETENTION_EBIB_LOWPWR S5P_PMUREG(0x1234) +#define S5P_PAD_RETENTION_ISOLATION_LOWPWR S5P_PMUREG(0x1240) +#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR S5P_PMUREG(0x1260) +#define S5P_XUSBXTI_LOWPWR S5P_PMUREG(0x1280) +#define S5P_XXTI_LOWPWR S5P_PMUREG(0x1284) +#define S5P_EXT_REGULATOR_LOWPWR S5P_PMUREG(0x12C0) +#define S5P_GPIO_MODE_LOWPWR S5P_PMUREG(0x1300) +#define S5P_GPIO_MODE_MAUDIO_LOWPWR S5P_PMUREG(0x1340) +#define S5P_CAM_LOWPWR S5P_PMUREG(0x1380) +#define S5P_TV_LOWPWR S5P_PMUREG(0x1384) +#define S5P_MFC_LOWPWR S5P_PMUREG(0x1388) +#define S5P_G3D_LOWPWR S5P_PMUREG(0x138C) +#define S5P_LCD0_LOWPWR S5P_PMUREG(0x1390) +#define S5P_LCD1_LOWPWR S5P_PMUREG(0x1394) +#define S5P_MAUDIO_LOWPWR S5P_PMUREG(0x1398) +#define S5P_GPS_LOWPWR S5P_PMUREG(0x139C) +#define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0) + +#define S5P_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000) +#define S5P_ARM_CORE0_OPTION S5P_PMUREG(0x2008) +#define S5P_ARM_CORE1_CONFIGURATION S5P_PMUREG(0x2080) +#define S5P_ARM_CORE1_STATUS S5P_PMUREG(0x2084) +#define S5P_ARM_CORE1_OPTION S5P_PMUREG(0x2088) + +#define S5P_ARM_COMMON_OPTION S5P_PMUREG(0x2408) +#define S5P_TOP_PWR_OPTION S5P_PMUREG(0x2C48) +#define S5P_CAM_OPTION S5P_PMUREG(0x3C08) +#define S5P_TV_OPTION S5P_PMUREG(0x3C28) +#define S5P_MFC_OPTION S5P_PMUREG(0x3C48) +#define S5P_G3D_OPTION S5P_PMUREG(0x3C68) +#define S5P_LCD0_OPTION S5P_PMUREG(0x3C88) +#define S5P_LCD1_OPTION S5P_PMUREG(0x3CA8) +#define S5P_MAUDIO_OPTION S5P_PMUREG(0x3CC8) +#define S5P_GPS_OPTION S5P_PMUREG(0x3CE8) +#define S5P_GPS_ALIVE_OPTION S5P_PMUREG(0x3D08) + +#define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028) +#define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108) +#define S5P_PAD_RET_UART_OPTION S5P_PMUREG(0x3128) +#define S5P_PAD_RET_MMCA_OPTION S5P_PMUREG(0x3148) +#define S5P_PAD_RET_MMCB_OPTION S5P_PMUREG(0x3168) +#define S5P_PAD_RET_EBIA_OPTION S5P_PMUREG(0x3188) +#define S5P_PAD_RET_EBIB_OPTION S5P_PMUREG(0x31A8) + +#define S5P_PMU_CAM_CONF S5P_PMUREG(0x3C00) +#define S5P_PMU_TV_CONF S5P_PMUREG(0x3C20) +#define S5P_PMU_MFC_CONF S5P_PMUREG(0x3C40) +#define S5P_PMU_G3D_CONF S5P_PMUREG(0x3C60) +#define S5P_PMU_LCD0_CONF S5P_PMUREG(0x3C80) +#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0) +#define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0) + +#define S5P_PMU_SATA_PHY_CONTROL_EN 0x1 +#define S5P_INT_LOCAL_PWR_EN 0x7 + +#define S5P_CHECK_SLEEP 0x00000BAD + +#endif /* __ASM_ARCH_REGS_PMU_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-sysmmu.h b/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h index 0b28e81..68ff6ad 100644 --- a/arch/arm/mach-s5pv310/include/mach/regs-sysmmu.h +++ b/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-sysmmu.h +/* linux/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * S5PV310 - System MMU register + * EXYNOS4 - System MMU register * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,6 +19,10 @@ #define S5P_MMU_FLUSH 0x00C #define S5P_PT_BASE_ADDR 0x014 #define S5P_INT_STATUS 0x018 +#define S5P_INT_CLEAR 0x01C #define S5P_PAGE_FAULT_ADDR 0x024 +#define S5P_AW_FAULT_ADDR 0x028 +#define S5P_AR_FAULT_ADDR 0x02C +#define S5P_DEFAULT_SLAVE_ADDR 0x030 #endif /* __ASM_ARCH_REGS_SYSMMU_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/smp.h b/arch/arm/mach-exynos4/include/mach/smp.h index 393ccbd..a463dce 100644 --- a/arch/arm/mach-s5pv310/include/mach/smp.h +++ b/arch/arm/mach-exynos4/include/mach/smp.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/smp.h +/* linux/arch/arm/mach-exynos4/include/mach/smp.h * * Cloned from arch/arm/mach-realview/include/mach/smp.h */ diff --git a/arch/arm/mach-exynos4/include/mach/sysmmu.h b/arch/arm/mach-exynos4/include/mach/sysmmu.h new file mode 100644 index 0000000..6a5fbb5 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/sysmmu.h @@ -0,0 +1,46 @@ +/* linux/arch/arm/mach-exynos4/include/mach/sysmmu.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung sysmmu driver for EXYNOS4 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_ARCH_SYSMMU_H +#define __ASM_ARM_ARCH_SYSMMU_H __FILE__ + +enum exynos4_sysmmu_ips { + SYSMMU_MDMA, + SYSMMU_SSS, + SYSMMU_FIMC0, + SYSMMU_FIMC1, + SYSMMU_FIMC2, + SYSMMU_FIMC3, + SYSMMU_JPEG, + SYSMMU_FIMD0, + SYSMMU_FIMD1, + SYSMMU_PCIe, + SYSMMU_G2D, + SYSMMU_ROTATOR, + SYSMMU_MDMA2, + SYSMMU_TV, + SYSMMU_MFC_L, + SYSMMU_MFC_R, + EXYNOS4_SYSMMU_TOTAL_IPNUM, +}; + +#define S5P_SYSMMU_TOTAL_IPNUM EXYNOS4_SYSMMU_TOTAL_IPNUM + +extern const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM]; + +typedef enum exynos4_sysmmu_ips sysmmu_ips; + +void sysmmu_clk_init(struct device *dev, sysmmu_ips ips); +void sysmmu_clk_enable(sysmmu_ips ips); +void sysmmu_clk_disable(sysmmu_ips ips); + +#endif /* __ASM_ARM_ARCH_SYSMMU_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/system.h b/arch/arm/mach-exynos4/include/mach/system.h index d10c009..5e3220c 100644 --- a/arch/arm/mach-s5pv310/include/mach/system.h +++ b/arch/arm/mach-exynos4/include/mach/system.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/system.h +/* linux/arch/arm/mach-exynos4/include/mach/system.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - system support header + * EXYNOS4 - system support header * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5pv310/include/mach/timex.h b/arch/arm/mach-exynos4/include/mach/timex.h index bd2359b..6d13875 100644 --- a/arch/arm/mach-s5pv310/include/mach/timex.h +++ b/arch/arm/mach-exynos4/include/mach/timex.h @@ -1,14 +1,14 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/timex.h +/* linux/arch/arm/mach-exynos4/include/mach/timex.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright (c) 2003-2010 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * Based on arch/arm/mach-s5p6442/include/mach/timex.h * - * S5PV310 - time parameters + * EXYNOS4 - time parameters * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5pv310/include/mach/uncompress.h b/arch/arm/mach-exynos4/include/mach/uncompress.h index 59593c1..21d97bc 100644 --- a/arch/arm/mach-s5pv310/include/mach/uncompress.h +++ b/arch/arm/mach-exynos4/include/mach/uncompress.h @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/uncompress.h +/* linux/arch/arm/mach-exynos4/include/mach/uncompress.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - uncompress code + * EXYNOS4 - uncompress code * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/mach-s5pv310/include/mach/vmalloc.h b/arch/arm/mach-exynos4/include/mach/vmalloc.h index 65759fb..284330e 100644 --- a/arch/arm/mach-s5pv310/include/mach/vmalloc.h +++ b/arch/arm/mach-exynos4/include/mach/vmalloc.h @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/vmalloc.h +/* linux/arch/arm/mach-exynos4/include/mach/vmalloc.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2010 Ben Dooks <ben-linux@fluff.org> * @@ -11,7 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * S5PV310 vmalloc definition + * EXYNOS4 vmalloc definition */ #ifndef __ASM_ARCH_VMALLOC_H diff --git a/arch/arm/mach-s5pv310/init.c b/arch/arm/mach-exynos4/init.c index 182dcf4..cf91f50 100644 --- a/arch/arm/mach-s5pv310/init.c +++ b/arch/arm/mach-exynos4/init.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s5pv310/init.c +/* linux/arch/arm/mach-exynos4/init.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -14,7 +14,7 @@ #include <plat/devs.h> #include <plat/regs-serial.h> -static struct s3c24xx_uart_clksrc s5pv310_serial_clocks[] = { +static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = { [0] = { .name = "uclk1", .divisor = 1, @@ -24,7 +24,7 @@ static struct s3c24xx_uart_clksrc s5pv310_serial_clocks[] = { }; /* uart registration process */ -void __init s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) +void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) { struct s3c2410_uartcfg *tcfg = cfg; u32 ucnt; @@ -32,8 +32,8 @@ void __init s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { if (!tcfg->clocks) { tcfg->has_fracval = 1; - tcfg->clocks = s5pv310_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5pv310_serial_clocks); + tcfg->clocks = exynos4_serial_clocks; + tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks); } } diff --git a/arch/arm/mach-s5pv310/irq-combiner.c b/arch/arm/mach-exynos4/irq-combiner.c index 1ea4a9e..31618d9 100644 --- a/arch/arm/mach-s5pv310/irq-combiner.c +++ b/arch/arm/mach-exynos4/irq-combiner.c @@ -1,6 +1,6 @@ -/* linux/arch/arm/mach-s5pv310/irq-combiner.c +/* linux/arch/arm/mach-exynos4/irq-combiner.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * * Based on arch/arm/common/gic.c diff --git a/arch/arm/mach-s5pv310/irq-eint.c b/arch/arm/mach-exynos4/irq-eint.c index 477bd9e..4f7ad4a 100644 --- a/arch/arm/mach-s5pv310/irq-eint.c +++ b/arch/arm/mach-exynos4/irq-eint.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/irq-eint.c +/* linux/arch/arm/mach-exynos4/irq-eint.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * S5PV310 - IRQ EINT support + * EXYNOS4 - IRQ EINT support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -27,7 +27,7 @@ static DEFINE_SPINLOCK(eint_lock); static unsigned int eint0_15_data[16]; -static unsigned int s5pv310_get_irq_nr(unsigned int number) +static unsigned int exynos4_get_irq_nr(unsigned int number) { u32 ret = 0; @@ -48,7 +48,7 @@ static unsigned int s5pv310_get_irq_nr(unsigned int number) return ret; } -static inline void s5pv310_irq_eint_mask(struct irq_data *data) +static inline void exynos4_irq_eint_mask(struct irq_data *data) { u32 mask; @@ -59,7 +59,7 @@ static inline void s5pv310_irq_eint_mask(struct irq_data *data) spin_unlock(&eint_lock); } -static void s5pv310_irq_eint_unmask(struct irq_data *data) +static void exynos4_irq_eint_unmask(struct irq_data *data) { u32 mask; @@ -70,19 +70,19 @@ static void s5pv310_irq_eint_unmask(struct irq_data *data) spin_unlock(&eint_lock); } -static inline void s5pv310_irq_eint_ack(struct irq_data *data) +static inline void exynos4_irq_eint_ack(struct irq_data *data) { __raw_writel(eint_irq_to_bit(data->irq), S5P_EINT_PEND(EINT_REG_NR(data->irq))); } -static void s5pv310_irq_eint_maskack(struct irq_data *data) +static void exynos4_irq_eint_maskack(struct irq_data *data) { - s5pv310_irq_eint_mask(data); - s5pv310_irq_eint_ack(data); + exynos4_irq_eint_mask(data); + exynos4_irq_eint_ack(data); } -static int s5pv310_irq_eint_set_type(struct irq_data *data, unsigned int type) +static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type) { int offs = EINT_OFFSET(data->irq); int shift; @@ -145,19 +145,19 @@ static int s5pv310_irq_eint_set_type(struct irq_data *data, unsigned int type) return 0; } -static struct irq_chip s5pv310_irq_eint = { - .name = "s5pv310-eint", - .irq_mask = s5pv310_irq_eint_mask, - .irq_unmask = s5pv310_irq_eint_unmask, - .irq_mask_ack = s5pv310_irq_eint_maskack, - .irq_ack = s5pv310_irq_eint_ack, - .irq_set_type = s5pv310_irq_eint_set_type, +static struct irq_chip exynos4_irq_eint = { + .name = "exynos4-eint", + .irq_mask = exynos4_irq_eint_mask, + .irq_unmask = exynos4_irq_eint_unmask, + .irq_mask_ack = exynos4_irq_eint_maskack, + .irq_ack = exynos4_irq_eint_ack, + .irq_set_type = exynos4_irq_eint_set_type, #ifdef CONFIG_PM .irq_set_wake = s3c_irqext_wake, #endif }; -/* s5pv310_irq_demux_eint +/* exynos4_irq_demux_eint * * This function demuxes the IRQ from from EINTs 16 to 31. * It is designed to be inlined into the specific handler @@ -165,7 +165,7 @@ static struct irq_chip s5pv310_irq_eint = { * * Each EINT pend/mask registers handle eight of them. */ -static inline void s5pv310_irq_demux_eint(unsigned int start) +static inline void exynos4_irq_demux_eint(unsigned int start) { unsigned int irq; @@ -182,13 +182,13 @@ static inline void s5pv310_irq_demux_eint(unsigned int start) } } -static void s5pv310_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) +static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) { - s5pv310_irq_demux_eint(IRQ_EINT(16)); - s5pv310_irq_demux_eint(IRQ_EINT(24)); + exynos4_irq_demux_eint(IRQ_EINT(16)); + exynos4_irq_demux_eint(IRQ_EINT(24)); } -static void s5pv310_irq_eint0_15(unsigned int irq, struct irq_desc *desc) +static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) { u32 *irq_data = get_irq_data(irq); struct irq_chip *chip = get_irq_chip(irq); @@ -203,27 +203,27 @@ static void s5pv310_irq_eint0_15(unsigned int irq, struct irq_desc *desc) chip->irq_unmask(&desc->irq_data); } -int __init s5pv310_init_irq_eint(void) +int __init exynos4_init_irq_eint(void) { int irq; for (irq = 0 ; irq <= 31 ; irq++) { - set_irq_chip(IRQ_EINT(irq), &s5pv310_irq_eint); + set_irq_chip(IRQ_EINT(irq), &exynos4_irq_eint); set_irq_handler(IRQ_EINT(irq), handle_level_irq); set_irq_flags(IRQ_EINT(irq), IRQF_VALID); } - set_irq_chained_handler(IRQ_EINT16_31, s5pv310_irq_demux_eint16_31); + set_irq_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31); for (irq = 0 ; irq <= 15 ; irq++) { eint0_15_data[irq] = IRQ_EINT(irq); - set_irq_data(s5pv310_get_irq_nr(irq), &eint0_15_data[irq]); - set_irq_chained_handler(s5pv310_get_irq_nr(irq), - s5pv310_irq_eint0_15); + set_irq_data(exynos4_get_irq_nr(irq), &eint0_15_data[irq]); + set_irq_chained_handler(exynos4_get_irq_nr(irq), + exynos4_irq_eint0_15); } return 0; } -arch_initcall(s5pv310_init_irq_eint); +arch_initcall(exynos4_init_irq_eint); diff --git a/arch/arm/mach-s5pv310/localtimer.c b/arch/arm/mach-exynos4/localtimer.c index 2784036..2a2993a 100644 --- a/arch/arm/mach-s5pv310/localtimer.c +++ b/arch/arm/mach-exynos4/localtimer.c @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s5pv310/localtimer.c +/* linux/arch/arm/mach-exynos4/localtimer.c * * Cloned from linux/arch/arm/mach-realview/localtimer.c * diff --git a/arch/arm/mach-exynos4/mach-armlex4210.c b/arch/arm/mach-exynos4/mach-armlex4210.c new file mode 100644 index 0000000..b482c62 --- /dev/null +++ b/arch/arm/mach-exynos4/mach-armlex4210.c @@ -0,0 +1,215 @@ +/* linux/arch/arm/mach-exynos4/mach-armlex4210.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/gpio.h> +#include <linux/io.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/smsc911x.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/exynos4.h> +#include <plat/gpio-cfg.h> +#include <plat/regs-serial.h> +#include <plat/regs-srom.h> +#include <plat/sdhci.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define ARMLEX4210_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define ARMLEX4210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = ARMLEX4210_UCON_DEFAULT, + .ulcon = ARMLEX4210_ULCON_DEFAULT, + .ufcon = ARMLEX4210_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = ARMLEX4210_UCON_DEFAULT, + .ulcon = ARMLEX4210_ULCON_DEFAULT, + .ufcon = ARMLEX4210_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = ARMLEX4210_UCON_DEFAULT, + .ulcon = ARMLEX4210_ULCON_DEFAULT, + .ufcon = ARMLEX4210_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = ARMLEX4210_UCON_DEFAULT, + .ulcon = ARMLEX4210_ULCON_DEFAULT, + .ufcon = ARMLEX4210_UFCON_DEFAULT, + }, +}; + +static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_PERMANENT, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT + .max_width = 8, + .host_caps = MMC_CAP_8_BIT_DATA, +#endif +}; + +static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = EXYNOS4_GPX2(5), + .ext_cd_gpio_invert = 1, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, + .max_width = 4, +}; + +static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_PERMANENT, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, + .max_width = 4, +}; + +static void __init armlex4210_sdhci_init(void) +{ + s3c_sdhci0_set_platdata(&armlex4210_hsmmc0_pdata); + s3c_sdhci2_set_platdata(&armlex4210_hsmmc2_pdata); + s3c_sdhci3_set_platdata(&armlex4210_hsmmc3_pdata); +} + +static void __init armlex4210_wlan_init(void) +{ + /* enable */ + s3c_gpio_cfgpin(EXYNOS4_GPX2(0), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(EXYNOS4_GPX2(0), S3C_GPIO_PULL_UP); + + /* reset */ + s3c_gpio_cfgpin(EXYNOS4_GPX1(6), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(EXYNOS4_GPX1(6), S3C_GPIO_PULL_UP); + + /* wakeup */ + s3c_gpio_cfgpin(EXYNOS4_GPX1(5), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(EXYNOS4_GPX1(5), S3C_GPIO_PULL_UP); +} + +static struct resource armlex4210_smsc911x_resources[] = { + [0] = { + .start = EXYNOS4_PA_SROM_BANK(3), + .end = EXYNOS4_PA_SROM_BANK(3) + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_EINT(27), + .end = IRQ_EINT(27), + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, + }, +}; + +static struct smsc911x_platform_config smsc9215_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, + .phy_interface = PHY_INTERFACE_MODE_MII, + .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67}, +}; + +static struct platform_device armlex4210_smsc911x = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(armlex4210_smsc911x_resources), + .resource = armlex4210_smsc911x_resources, + .dev = { + .platform_data = &smsc9215_config, + }, +}; + +static struct platform_device *armlex4210_devices[] __initdata = { + &s3c_device_hsmmc0, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_rtc, + &s3c_device_wdt, + &exynos4_device_sysmmu, + &samsung_asoc_dma, + &armlex4210_smsc911x, + &exynos4_device_ahci, +}; + +static void __init armlex4210_smsc911x_init(void) +{ + u32 cs1; + + /* configure nCS1 width to 16 bits */ + cs1 = __raw_readl(S5P_SROM_BW) & + ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT); + cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) | + (0 << S5P_SROM_BW__WAITENABLE__SHIFT) | + (1 << S5P_SROM_BW__ADDRMODE__SHIFT) | + (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) << + S5P_SROM_BW__NCS1__SHIFT; + __raw_writel(cs1, S5P_SROM_BW); + + /* set timing for nCS1 suitable for ethernet chip */ + __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) | + (0x9 << S5P_SROM_BCX__TACP__SHIFT) | + (0xc << S5P_SROM_BCX__TCAH__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOH__SHIFT) | + (0x6 << S5P_SROM_BCX__TACC__SHIFT) | + (0x1 << S5P_SROM_BCX__TCOS__SHIFT) | + (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); +} + +static void __init armlex4210_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(armlex4210_uartcfgs, + ARRAY_SIZE(armlex4210_uartcfgs)); +} + +static void __init armlex4210_machine_init(void) +{ + armlex4210_smsc911x_init(); + + armlex4210_sdhci_init(); + + armlex4210_wlan_init(); + + platform_add_devices(armlex4210_devices, + ARRAY_SIZE(armlex4210_devices)); +} + +MACHINE_START(ARMLEX4210, "ARMLEX4210") + /* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */ + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = exynos4_init_irq, + .map_io = armlex4210_map_io, + .init_machine = armlex4210_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c new file mode 100644 index 0000000..b79ad01 --- /dev/null +++ b/arch/arm/mach-exynos4/mach-nuri.c @@ -0,0 +1,305 @@ +/* + * linux/arch/arm/mach-exynos4/mach-nuri.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/input.h> +#include <linux/i2c.h> +#include <linux/gpio_keys.h> +#include <linux/gpio.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/mmc/host.h> +#include <linux/fb.h> +#include <linux/pwm_backlight.h> + +#include <video/platform_lcd.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> +#include <plat/exynos4.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/sdhci.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define NURI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define NURI_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define NURI_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG256 | \ + S5PV210_UFCON_RXTRIG256) + +enum fixed_regulator_id { + FIXED_REG_ID_MMC = 0, +}; + +static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = { + { + .hwport = 0, + .ucon = NURI_UCON_DEFAULT, + .ulcon = NURI_ULCON_DEFAULT, + .ufcon = NURI_UFCON_DEFAULT, + }, + { + .hwport = 1, + .ucon = NURI_UCON_DEFAULT, + .ulcon = NURI_ULCON_DEFAULT, + .ufcon = NURI_UFCON_DEFAULT, + }, + { + .hwport = 2, + .ucon = NURI_UCON_DEFAULT, + .ulcon = NURI_ULCON_DEFAULT, + .ufcon = NURI_UFCON_DEFAULT, + }, + { + .hwport = 3, + .ucon = NURI_UCON_DEFAULT, + .ulcon = NURI_ULCON_DEFAULT, + .ufcon = NURI_UFCON_DEFAULT, + }, +}; + +/* eMMC */ +static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { + .max_width = 8, + .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_DISABLE | MMC_CAP_ERASE), + .cd_type = S3C_SDHCI_CD_PERMANENT, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct regulator_consumer_supply emmc_supplies[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), + REGULATOR_SUPPLY("vmmc", "dw_mmc"), +}; + +static struct regulator_init_data emmc_fixed_voltage_init_data = { + .constraints = { + .name = "VMEM_VDD_2.8V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(emmc_supplies), + .consumer_supplies = emmc_supplies, +}; + +static struct fixed_voltage_config emmc_fixed_voltage_config = { + .supply_name = "MASSMEMORY_EN (inverted)", + .microvolts = 2800000, + .gpio = EXYNOS4_GPL1(1), + .enable_high = false, + .init_data = &emmc_fixed_voltage_init_data, +}; + +static struct platform_device emmc_fixed_voltage = { + .name = "reg-fixed-voltage", + .id = FIXED_REG_ID_MMC, + .dev = { + .platform_data = &emmc_fixed_voltage_config, + }, +}; + +/* SD */ +static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = { + .max_width = 4, + .host_caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_DISABLE, + .ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */ + .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_GPIO, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +/* WLAN */ +static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = { + .max_width = 4, + .host_caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, + .cd_type = S3C_SDHCI_CD_EXTERNAL, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static void __init nuri_sdhci_init(void) +{ + s3c_sdhci0_set_platdata(&nuri_hsmmc0_data); + s3c_sdhci2_set_platdata(&nuri_hsmmc2_data); + s3c_sdhci3_set_platdata(&nuri_hsmmc3_data); +} + +/* GPIO KEYS */ +static struct gpio_keys_button nuri_gpio_keys_tables[] = { + { + .code = KEY_VOLUMEUP, + .gpio = EXYNOS4_GPX2(0), /* XEINT16 */ + .desc = "gpio-keys: KEY_VOLUMEUP", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_VOLUMEDOWN, + .gpio = EXYNOS4_GPX2(1), /* XEINT17 */ + .desc = "gpio-keys: KEY_VOLUMEDOWN", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_POWER, + .gpio = EXYNOS4_GPX2(7), /* XEINT23 */ + .desc = "gpio-keys: KEY_POWER", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, +}; + +static struct gpio_keys_platform_data nuri_gpio_keys_data = { + .buttons = nuri_gpio_keys_tables, + .nbuttons = ARRAY_SIZE(nuri_gpio_keys_tables), +}; + +static struct platform_device nuri_gpio_keys = { + .name = "gpio-keys", + .dev = { + .platform_data = &nuri_gpio_keys_data, + }, +}; + +static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power) +{ + int gpio = EXYNOS4_GPE1(5); + + gpio_request(gpio, "LVDS_nSHDN"); + gpio_direction_output(gpio, power); + gpio_free(gpio); +} + +static int nuri_bl_init(struct device *dev) +{ + int ret, gpio = EXYNOS4_GPE2(3); + + ret = gpio_request(gpio, "LCD_LDO_EN"); + if (!ret) + gpio_direction_output(gpio, 0); + + return ret; +} + +static int nuri_bl_notify(struct device *dev, int brightness) +{ + if (brightness < 1) + brightness = 0; + + gpio_set_value(EXYNOS4_GPE2(3), 1); + + return brightness; +} + +static void nuri_bl_exit(struct device *dev) +{ + gpio_free(EXYNOS4_GPE2(3)); +} + +/* nuri pwm backlight */ +static struct platform_pwm_backlight_data nuri_backlight_data = { + .pwm_id = 0, + .pwm_period_ns = 30000, + .max_brightness = 100, + .dft_brightness = 50, + .init = nuri_bl_init, + .notify = nuri_bl_notify, + .exit = nuri_bl_exit, +}; + +static struct platform_device nuri_backlight_device = { + .name = "pwm-backlight", + .id = -1, + .dev = { + .parent = &s3c_device_timer[0].dev, + .platform_data = &nuri_backlight_data, + }, +}; + +static struct plat_lcd_data nuri_lcd_platform_data = { + .set_power = nuri_lcd_power_on, +}; + +static struct platform_device nuri_lcd_device = { + .name = "platform-lcd", + .id = -1, + .dev = { + .platform_data = &nuri_lcd_platform_data, + }, +}; + +/* I2C1 */ +static struct i2c_board_info i2c1_devs[] __initdata = { + /* Gyro, To be updated */ +}; + +/* GPIO I2C 5 (PMIC) */ +static struct i2c_board_info i2c5_devs[] __initdata = { + /* max8997, To be updated */ +}; + +static struct platform_device *nuri_devices[] __initdata = { + /* Samsung Platform Devices */ + &emmc_fixed_voltage, + &s3c_device_hsmmc0, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_wdt, + &s3c_device_timer[0], + + /* NURI Devices */ + &nuri_gpio_keys, + &nuri_lcd_device, + &nuri_backlight_device, +}; + +static void __init nuri_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs)); +} + +static void __init nuri_machine_init(void) +{ + nuri_sdhci_init(); + + i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); + + /* Last */ + platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); +} + +MACHINE_START(NURI, "NURI") + /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = exynos4_init_irq, + .map_io = nuri_map_io, + .init_machine = nuri_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-s5pv310/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c index d9cab02..25a2568 100644 --- a/arch/arm/mach-s5pv310/mach-smdkc210.c +++ b/arch/arm/mach-exynos4/mach-smdkc210.c @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5pv310/mach-smdkc210.c +/* linux/arch/arm/mach-exynos4/mach-smdkc210.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -21,7 +21,7 @@ #include <plat/regs-serial.h> #include <plat/regs-srom.h> -#include <plat/s5pv310.h> +#include <plat/exynos4.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/sdhci.h> @@ -77,10 +77,10 @@ static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = { static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK0(2), + .ext_cd_gpio = EXYNOS4_GPK0(2), .ext_cd_gpio_invert = 1, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT +#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT .max_width = 8, .host_caps = MMC_CAP_8_BIT_DATA, #endif @@ -88,17 +88,17 @@ static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = { static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK0(2), + .ext_cd_gpio = EXYNOS4_GPK0(2), .ext_cd_gpio_invert = 1, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK2(2), + .ext_cd_gpio = EXYNOS4_GPK2(2), .ext_cd_gpio_invert = 1, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT +#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT .max_width = 8, .host_caps = MMC_CAP_8_BIT_DATA, #endif @@ -106,15 +106,15 @@ static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = { static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK2(2), + .ext_cd_gpio = EXYNOS4_GPK2(2), .ext_cd_gpio_invert = 1, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static struct resource smdkc210_smsc911x_resources[] = { [0] = { - .start = S5PV310_PA_SROM_BANK(1), - .end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1, + .start = EXYNOS4_PA_SROM_BANK(1), + .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -154,16 +154,16 @@ static struct platform_device *smdkc210_devices[] __initdata = { &s3c_device_i2c1, &s3c_device_rtc, &s3c_device_wdt, - &s5pv310_device_ac97, - &s5pv310_device_i2s0, - &s5pv310_device_pd[PD_MFC], - &s5pv310_device_pd[PD_G3D], - &s5pv310_device_pd[PD_LCD0], - &s5pv310_device_pd[PD_LCD1], - &s5pv310_device_pd[PD_CAM], - &s5pv310_device_pd[PD_TV], - &s5pv310_device_pd[PD_GPS], - &s5pv310_device_sysmmu, + &exynos4_device_ac97, + &exynos4_device_i2s0, + &exynos4_device_pd[PD_MFC], + &exynos4_device_pd[PD_G3D], + &exynos4_device_pd[PD_LCD0], + &exynos4_device_pd[PD_LCD1], + &exynos4_device_pd[PD_CAM], + &exynos4_device_pd[PD_TV], + &exynos4_device_pd[PD_GPS], + &exynos4_device_sysmmu, &samsung_asoc_dma, &smdkc210_smsc911x, }; @@ -216,8 +216,8 @@ static void __init smdkc210_machine_init(void) MACHINE_START(SMDKC210, "SMDKC210") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ .boot_params = S5P_PA_SDRAM + 0x100, - .init_irq = s5pv310_init_irq, + .init_irq = exynos4_init_irq, .map_io = smdkc210_map_io, .init_machine = smdkc210_machine_init, - .timer = &s5pv310_timer, + .timer = &exynos4_timer, MACHINE_END diff --git a/arch/arm/mach-s5pv310/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index b1cddbf..88e0275 100644 --- a/arch/arm/mach-s5pv310/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5pv310/mach-smdkv310.c +/* linux/arch/arm/mach-exynos4/mach-smdkv310.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,15 +15,17 @@ #include <linux/smsc911x.h> #include <linux/io.h> #include <linux/i2c.h> +#include <linux/input.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include <plat/regs-serial.h> #include <plat/regs-srom.h> -#include <plat/s5pv310.h> +#include <plat/exynos4.h> #include <plat/cpu.h> #include <plat/devs.h> +#include <plat/keypad.h> #include <plat/sdhci.h> #include <plat/iic.h> #include <plat/pd.h> @@ -77,10 +79,10 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK0(2), + .ext_cd_gpio = EXYNOS4_GPK0(2), .ext_cd_gpio_invert = 1, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT +#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT .max_width = 8, .host_caps = MMC_CAP_8_BIT_DATA, #endif @@ -88,17 +90,17 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = { static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK0(2), + .ext_cd_gpio = EXYNOS4_GPK0(2), .ext_cd_gpio_invert = 1, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK2(2), + .ext_cd_gpio = EXYNOS4_GPK2(2), .ext_cd_gpio_invert = 1, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT +#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT .max_width = 8, .host_caps = MMC_CAP_8_BIT_DATA, #endif @@ -106,15 +108,15 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = { static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = { .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = S5PV310_GPK2(2), + .ext_cd_gpio = EXYNOS4_GPK2(2), .ext_cd_gpio_invert = 1, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; static struct resource smdkv310_smsc911x_resources[] = { [0] = { - .start = S5PV310_PA_SROM_BANK(1), - .end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1, + .start = EXYNOS4_PA_SROM_BANK(1), + .end = EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -142,6 +144,25 @@ static struct platform_device smdkv310_smsc911x = { }, }; +static uint32_t smdkv310_keymap[] __initdata = { + /* KEY(row, col, keycode) */ + KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3), + KEY(0, 6, KEY_4), KEY(0, 7, KEY_5), + KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C), + KEY(1, 6, KEY_D), KEY(1, 7, KEY_E) +}; + +static struct matrix_keymap_data smdkv310_keymap_data __initdata = { + .keymap = smdkv310_keymap, + .keymap_size = ARRAY_SIZE(smdkv310_keymap), +}; + +static struct samsung_keypad_platdata smdkv310_keypad_data __initdata = { + .keymap_data = &smdkv310_keymap_data, + .rows = 2, + .cols = 8, +}; + static struct i2c_board_info i2c_devs1[] __initdata = { {I2C_BOARD_INFO("wm8994", 0x1a),}, }; @@ -154,16 +175,17 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s3c_device_i2c1, &s3c_device_rtc, &s3c_device_wdt, - &s5pv310_device_ac97, - &s5pv310_device_i2s0, - &s5pv310_device_pd[PD_MFC], - &s5pv310_device_pd[PD_G3D], - &s5pv310_device_pd[PD_LCD0], - &s5pv310_device_pd[PD_LCD1], - &s5pv310_device_pd[PD_CAM], - &s5pv310_device_pd[PD_TV], - &s5pv310_device_pd[PD_GPS], - &s5pv310_device_sysmmu, + &exynos4_device_ac97, + &exynos4_device_i2s0, + &samsung_device_keypad, + &exynos4_device_pd[PD_MFC], + &exynos4_device_pd[PD_G3D], + &exynos4_device_pd[PD_LCD0], + &exynos4_device_pd[PD_LCD1], + &exynos4_device_pd[PD_CAM], + &exynos4_device_pd[PD_TV], + &exynos4_device_pd[PD_GPS], + &exynos4_device_sysmmu, &samsung_asoc_dma, &smdkv310_smsc911x, }; @@ -210,6 +232,8 @@ static void __init smdkv310_machine_init(void) s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata); s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata); + samsung_keypad_set_platdata(&smdkv310_keypad_data); + platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); } @@ -217,8 +241,8 @@ MACHINE_START(SMDKV310, "SMDKV310") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */ .boot_params = S5P_PA_SDRAM + 0x100, - .init_irq = s5pv310_init_irq, + .init_irq = exynos4_init_irq, .map_io = smdkv310_map_io, .init_machine = smdkv310_machine_init, - .timer = &s5pv310_timer, + .timer = &exynos4_timer, MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c new file mode 100644 index 0000000..97d329f --- /dev/null +++ b/arch/arm/mach-exynos4/mach-universal_c210.c @@ -0,0 +1,650 @@ +/* linux/arch/arm/mach-exynos4/mach-universal_c210.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/platform_device.h> +#include <linux/serial_core.h> +#include <linux/input.h> +#include <linux/i2c.h> +#include <linux/gpio_keys.h> +#include <linux/gpio.h> +#include <linux/mfd/max8998.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/max8952.h> +#include <linux/mmc/host.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> +#include <plat/exynos4.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/iic.h> +#include <plat/sdhci.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8 + +#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG256 | \ + S5PV210_UFCON_RXTRIG256) + +static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .ucon = UNIVERSAL_UCON_DEFAULT, + .ulcon = UNIVERSAL_ULCON_DEFAULT, + .ufcon = UNIVERSAL_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .ucon = UNIVERSAL_UCON_DEFAULT, + .ulcon = UNIVERSAL_ULCON_DEFAULT, + .ufcon = UNIVERSAL_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .ucon = UNIVERSAL_UCON_DEFAULT, + .ulcon = UNIVERSAL_ULCON_DEFAULT, + .ufcon = UNIVERSAL_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .ucon = UNIVERSAL_UCON_DEFAULT, + .ulcon = UNIVERSAL_ULCON_DEFAULT, + .ufcon = UNIVERSAL_UFCON_DEFAULT, + }, +}; + +static struct regulator_consumer_supply max8952_consumer = + REGULATOR_SUPPLY("vddarm", NULL); + +static struct max8952_platform_data universal_max8952_pdata __initdata = { + .gpio_vid0 = EXYNOS4_GPX0(3), + .gpio_vid1 = EXYNOS4_GPX0(4), + .gpio_en = -1, /* Not controllable, set "Always High" */ + .default_mode = 0, /* vid0 = 0, vid1 = 0 */ + .dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */ + .sync_freq = 0, /* default: fastest */ + .ramp_speed = 0, /* default: fastest */ + + .reg_data = { + .constraints = { + .name = "VARM_1.2V", + .min_uV = 770000, + .max_uV = 1400000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &max8952_consumer, + }, +}; + +static struct regulator_consumer_supply lp3974_buck1_consumer = + REGULATOR_SUPPLY("vddint", NULL); + +static struct regulator_consumer_supply lp3974_buck2_consumer = + REGULATOR_SUPPLY("vddg3d", NULL); + +static struct regulator_init_data lp3974_buck1_data = { + .constraints = { + .name = "VINT_1.1V", + .min_uV = 750000, + .max_uV = 1500000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &lp3974_buck1_consumer, +}; + +static struct regulator_init_data lp3974_buck2_data = { + .constraints = { + .name = "VG3D_1.1V", + .min_uV = 750000, + .max_uV = 1500000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &lp3974_buck2_consumer, +}; + +static struct regulator_init_data lp3974_buck3_data = { + .constraints = { + .name = "VCC_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_buck4_data = { + .constraints = { + .name = "VMEM_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo2_data = { + .constraints = { + .name = "VALIVE_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo3_data = { + .constraints = { + .name = "VUSB+MIPI_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo4_data = { + .constraints = { + .name = "VADC_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo5_data = { + .constraints = { + .name = "VTF_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo6_data = { + .constraints = { + .name = "LDO6", + .min_uV = 2000000, + .max_uV = 2000000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo7_data = { + .constraints = { + .name = "VLCD+VMIPI_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo8_data = { + .constraints = { + .name = "VUSB+VDAC_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo9_data = { + .constraints = { + .name = "VCC_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo10_data = { + .constraints = { + .name = "VPLL_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .boot_on = 1, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo11_data = { + .constraints = { + .name = "CAM_AF_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo12_data = { + .constraints = { + .name = "PS_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo13_data = { + .constraints = { + .name = "VHIC_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo14_data = { + .constraints = { + .name = "CAM_I_HOST_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo15_data = { + .constraints = { + .name = "CAM_S_DIG+FM33_CORE_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo16_data = { + .constraints = { + .name = "CAM_S_ANA_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_ldo17_data = { + .constraints = { + .name = "VCC_3.0V_LCD", + .min_uV = 3000000, + .max_uV = 3000000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_32khz_ap_data = { + .constraints = { + .name = "32KHz AP", + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_32khz_cp_data = { + .constraints = { + .name = "32KHz CP", + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_vichg_data = { + .constraints = { + .name = "VICHG", + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_esafeout1_data = { + .constraints = { + .name = "SAFEOUT1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data lp3974_esafeout2_data = { + .constraints = { + .name = "SAFEOUT2", + .boot_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct max8998_regulator_data lp3974_regulators[] = { + { MAX8998_LDO2, &lp3974_ldo2_data }, + { MAX8998_LDO3, &lp3974_ldo3_data }, + { MAX8998_LDO4, &lp3974_ldo4_data }, + { MAX8998_LDO5, &lp3974_ldo5_data }, + { MAX8998_LDO6, &lp3974_ldo6_data }, + { MAX8998_LDO7, &lp3974_ldo7_data }, + { MAX8998_LDO8, &lp3974_ldo8_data }, + { MAX8998_LDO9, &lp3974_ldo9_data }, + { MAX8998_LDO10, &lp3974_ldo10_data }, + { MAX8998_LDO11, &lp3974_ldo11_data }, + { MAX8998_LDO12, &lp3974_ldo12_data }, + { MAX8998_LDO13, &lp3974_ldo13_data }, + { MAX8998_LDO14, &lp3974_ldo14_data }, + { MAX8998_LDO15, &lp3974_ldo15_data }, + { MAX8998_LDO16, &lp3974_ldo16_data }, + { MAX8998_LDO17, &lp3974_ldo17_data }, + { MAX8998_BUCK1, &lp3974_buck1_data }, + { MAX8998_BUCK2, &lp3974_buck2_data }, + { MAX8998_BUCK3, &lp3974_buck3_data }, + { MAX8998_BUCK4, &lp3974_buck4_data }, + { MAX8998_EN32KHZ_AP, &lp3974_32khz_ap_data }, + { MAX8998_EN32KHZ_CP, &lp3974_32khz_cp_data }, + { MAX8998_ENVICHG, &lp3974_vichg_data }, + { MAX8998_ESAFEOUT1, &lp3974_esafeout1_data }, + { MAX8998_ESAFEOUT2, &lp3974_esafeout2_data }, +}; + +static struct max8998_platform_data universal_lp3974_pdata = { + .num_regulators = ARRAY_SIZE(lp3974_regulators), + .regulators = lp3974_regulators, + .buck1_voltage1 = 1100000, /* INT */ + .buck1_voltage2 = 1000000, + .buck1_voltage3 = 1100000, + .buck1_voltage4 = 1000000, + .buck1_set1 = EXYNOS4_GPX0(5), + .buck1_set2 = EXYNOS4_GPX0(6), + .buck2_voltage1 = 1200000, /* G3D */ + .buck2_voltage2 = 1100000, + .buck1_default_idx = 0, + .buck2_set3 = EXYNOS4_GPE2(0), + .buck2_default_idx = 0, + .wakeup = true, +}; + +/* GPIO I2C 5 (PMIC) */ +static struct i2c_board_info i2c5_devs[] __initdata = { + { + I2C_BOARD_INFO("max8952", 0xC0 >> 1), + .platform_data = &universal_max8952_pdata, + }, { + I2C_BOARD_INFO("lp3974", 0xCC >> 1), + .platform_data = &universal_lp3974_pdata, + }, +}; + +/* GPIO KEYS */ +static struct gpio_keys_button universal_gpio_keys_tables[] = { + { + .code = KEY_VOLUMEUP, + .gpio = EXYNOS4_GPX2(0), /* XEINT16 */ + .desc = "gpio-keys: KEY_VOLUMEUP", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_VOLUMEDOWN, + .gpio = EXYNOS4_GPX2(1), /* XEINT17 */ + .desc = "gpio-keys: KEY_VOLUMEDOWN", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_CONFIG, + .gpio = EXYNOS4_GPX2(2), /* XEINT18 */ + .desc = "gpio-keys: KEY_CONFIG", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_CAMERA, + .gpio = EXYNOS4_GPX2(3), /* XEINT19 */ + .desc = "gpio-keys: KEY_CAMERA", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, { + .code = KEY_OK, + .gpio = EXYNOS4_GPX3(5), /* XEINT29 */ + .desc = "gpio-keys: KEY_OK", + .type = EV_KEY, + .active_low = 1, + .debounce_interval = 1, + }, +}; + +static struct gpio_keys_platform_data universal_gpio_keys_data = { + .buttons = universal_gpio_keys_tables, + .nbuttons = ARRAY_SIZE(universal_gpio_keys_tables), +}; + +static struct platform_device universal_gpio_keys = { + .name = "gpio-keys", + .dev = { + .platform_data = &universal_gpio_keys_data, + }, +}; + +/* eMMC */ +static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { + .max_width = 8, + .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_DISABLE), + .cd_type = S3C_SDHCI_CD_PERMANENT, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +static struct regulator_consumer_supply mmc0_supplies[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), +}; + +static struct regulator_init_data mmc0_fixed_voltage_init_data = { + .constraints = { + .name = "VMEM_VDD_2.8V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(mmc0_supplies), + .consumer_supplies = mmc0_supplies, +}; + +static struct fixed_voltage_config mmc0_fixed_voltage_config = { + .supply_name = "MASSMEMORY_EN", + .microvolts = 2800000, + .gpio = EXYNOS4_GPE1(3), + .enable_high = true, + .init_data = &mmc0_fixed_voltage_init_data, +}; + +static struct platform_device mmc0_fixed_voltage = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &mmc0_fixed_voltage_config, + }, +}; + +/* SD */ +static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { + .max_width = 4, + .host_caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_DISABLE, + .ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */ + .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_GPIO, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + +/* WiFi */ +static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = { + .max_width = 4, + .host_caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | + MMC_CAP_DISABLE, + .cd_type = S3C_SDHCI_CD_EXTERNAL, +}; + +static void __init universal_sdhci_init(void) +{ + s3c_sdhci0_set_platdata(&universal_hsmmc0_data); + s3c_sdhci2_set_platdata(&universal_hsmmc2_data); + s3c_sdhci3_set_platdata(&universal_hsmmc3_data); +} + +/* I2C0 */ +static struct i2c_board_info i2c0_devs[] __initdata = { + /* Camera, To be updated */ +}; + +/* I2C1 */ +static struct i2c_board_info i2c1_devs[] __initdata = { + /* Gyro, To be updated */ +}; + +static struct platform_device *universal_devices[] __initdata = { + /* Samsung Platform Devices */ + &mmc0_fixed_voltage, + &s3c_device_hsmmc0, + &s3c_device_hsmmc2, + &s3c_device_hsmmc3, + &s3c_device_i2c5, + + /* Universal Devices */ + &universal_gpio_keys, + &s5p_device_onenand, +}; + +static void __init universal_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); +} + +static void __init universal_machine_init(void) +{ + universal_sdhci_init(); + + i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); + i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + + s3c_i2c5_set_platdata(NULL); + i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); + + /* Last */ + platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); +} + +MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") + /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ + .boot_params = S5P_PA_SDRAM + 0x100, + .init_irq = exynos4_init_irq, + .map_io = universal_map_io, + .init_machine = universal_machine_init, + .timer = &exynos4_timer, +MACHINE_END diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c new file mode 100644 index 0000000..af82a8f --- /dev/null +++ b/arch/arm/mach-exynos4/mct.c @@ -0,0 +1,421 @@ +/* linux/arch/arm/mach-exynos4/mct.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 MCT(Multi-Core Timer) support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/percpu.h> + +#include <mach/map.h> +#include <mach/regs-mct.h> +#include <asm/mach/time.h> + +static unsigned long clk_cnt_per_tick; +static unsigned long clk_rate; + +struct mct_clock_event_device { + struct clock_event_device *evt; + void __iomem *base; +}; + +struct mct_clock_event_device mct_tick[2]; + +static void exynos4_mct_write(unsigned int value, void *addr) +{ + void __iomem *stat_addr; + u32 mask; + u32 i; + + __raw_writel(value, addr); + + switch ((u32) addr) { + case (u32) EXYNOS4_MCT_G_TCON: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 16; /* G_TCON write status */ + break; + case (u32) EXYNOS4_MCT_G_COMP0_L: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 0; /* G_COMP0_L write status */ + break; + case (u32) EXYNOS4_MCT_G_COMP0_U: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 1; /* G_COMP0_U write status */ + break; + case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR: + stat_addr = EXYNOS4_MCT_G_WSTAT; + mask = 1 << 2; /* G_COMP0_ADD_INCR write status */ + break; + case (u32) EXYNOS4_MCT_G_CNT_L: + stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; + mask = 1 << 0; /* G_CNT_L write status */ + break; + case (u32) EXYNOS4_MCT_G_CNT_U: + stat_addr = EXYNOS4_MCT_G_CNT_WSTAT; + mask = 1 << 1; /* G_CNT_U write status */ + break; + case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCON_OFFSET): + stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET; + mask = 1 << 3; /* L0_TCON write status */ + break; + case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCON_OFFSET): + stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET; + mask = 1 << 3; /* L1_TCON write status */ + break; + case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCNTB_OFFSET): + stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET; + mask = 1 << 0; /* L0_TCNTB write status */ + break; + case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCNTB_OFFSET): + stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET; + mask = 1 << 0; /* L1_TCNTB write status */ + break; + case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_ICNTB_OFFSET): + stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET; + mask = 1 << 1; /* L0_ICNTB write status */ + break; + case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_ICNTB_OFFSET): + stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET; + mask = 1 << 1; /* L1_ICNTB write status */ + break; + default: + return; + } + + /* Wait maximum 1 ms until written values are applied */ + for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++) + if (__raw_readl(stat_addr) & mask) { + __raw_writel(mask, stat_addr); + return; + } + + panic("MCT hangs after writing %d (addr:0x%08x)\n", value, (u32)addr); +} + +/* Clocksource handling */ +static void exynos4_mct_frc_start(u32 hi, u32 lo) +{ + u32 reg; + + exynos4_mct_write(lo, EXYNOS4_MCT_G_CNT_L); + exynos4_mct_write(hi, EXYNOS4_MCT_G_CNT_U); + + reg = __raw_readl(EXYNOS4_MCT_G_TCON); + reg |= MCT_G_TCON_START; + exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON); +} + +static cycle_t exynos4_frc_read(struct clocksource *cs) +{ + unsigned int lo, hi; + u32 hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U); + + do { + hi = hi2; + lo = __raw_readl(EXYNOS4_MCT_G_CNT_L); + hi2 = __raw_readl(EXYNOS4_MCT_G_CNT_U); + } while (hi != hi2); + + return ((cycle_t)hi << 32) | lo; +} + +struct clocksource mct_frc = { + .name = "mct-frc", + .rating = 400, + .read = exynos4_frc_read, + .mask = CLOCKSOURCE_MASK(64), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void __init exynos4_clocksource_init(void) +{ + exynos4_mct_frc_start(0, 0); + + if (clocksource_register_hz(&mct_frc, clk_rate)) + panic("%s: can't register clocksource\n", mct_frc.name); +} + +static void exynos4_mct_comp0_stop(void) +{ + unsigned int tcon; + + tcon = __raw_readl(EXYNOS4_MCT_G_TCON); + tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC); + + exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON); + exynos4_mct_write(0, EXYNOS4_MCT_G_INT_ENB); +} + +static void exynos4_mct_comp0_start(enum clock_event_mode mode, + unsigned long cycles) +{ + unsigned int tcon; + cycle_t comp_cycle; + + tcon = __raw_readl(EXYNOS4_MCT_G_TCON); + + if (mode == CLOCK_EVT_MODE_PERIODIC) { + tcon |= MCT_G_TCON_COMP0_AUTO_INC; + exynos4_mct_write(cycles, EXYNOS4_MCT_G_COMP0_ADD_INCR); + } + + comp_cycle = exynos4_frc_read(&mct_frc) + cycles; + exynos4_mct_write((u32)comp_cycle, EXYNOS4_MCT_G_COMP0_L); + exynos4_mct_write((u32)(comp_cycle >> 32), EXYNOS4_MCT_G_COMP0_U); + + exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_ENB); + + tcon |= MCT_G_TCON_COMP0_ENABLE; + exynos4_mct_write(tcon , EXYNOS4_MCT_G_TCON); +} + +static int exynos4_comp_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + exynos4_mct_comp0_start(evt->mode, cycles); + + return 0; +} + +static void exynos4_comp_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + exynos4_mct_comp0_stop(); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + exynos4_mct_comp0_start(mode, clk_cnt_per_tick); + break; + + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static struct clock_event_device mct_comp_device = { + .name = "mct-comp", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .rating = 250, + .set_next_event = exynos4_comp_set_next_event, + .set_mode = exynos4_comp_set_mode, +}; + +static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_CSTAT); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction mct_comp_event_irq = { + .name = "mct_comp_irq", + .flags = IRQF_TIMER | IRQF_IRQPOLL, + .handler = exynos4_mct_comp_isr, + .dev_id = &mct_comp_device, +}; + +static void exynos4_clockevent_init(void) +{ + clk_cnt_per_tick = clk_rate / 2 / HZ; + + clockevents_calc_mult_shift(&mct_comp_device, clk_rate / 2, 5); + mct_comp_device.max_delta_ns = + clockevent_delta2ns(0xffffffff, &mct_comp_device); + mct_comp_device.min_delta_ns = + clockevent_delta2ns(0xf, &mct_comp_device); + mct_comp_device.cpumask = cpumask_of(0); + clockevents_register_device(&mct_comp_device); + + setup_irq(IRQ_MCT_G0, &mct_comp_event_irq); +} + +#ifdef CONFIG_LOCAL_TIMERS +/* Clock event handling */ +static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt) +{ + unsigned long tmp; + unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START; + void __iomem *addr = mevt->base + MCT_L_TCON_OFFSET; + + tmp = __raw_readl(addr); + if (tmp & mask) { + tmp &= ~mask; + exynos4_mct_write(tmp, addr); + } +} + +static void exynos4_mct_tick_start(unsigned long cycles, + struct mct_clock_event_device *mevt) +{ + unsigned long tmp; + + exynos4_mct_tick_stop(mevt); + + tmp = (1 << 31) | cycles; /* MCT_L_UPDATE_ICNTB */ + + /* update interrupt count buffer */ + exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET); + + /* enable MCT tick interupt */ + exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET); + + tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET); + tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START | + MCT_L_TCON_INTERVAL_MODE; + exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET); +} + +static int exynos4_tick_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + struct mct_clock_event_device *mevt = &mct_tick[smp_processor_id()]; + + exynos4_mct_tick_start(cycles, mevt); + + return 0; +} + +static inline void exynos4_tick_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + struct mct_clock_event_device *mevt = &mct_tick[smp_processor_id()]; + + exynos4_mct_tick_stop(mevt); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + exynos4_mct_tick_start(clk_cnt_per_tick, mevt); + break; + + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id) +{ + struct mct_clock_event_device *mevt = dev_id; + struct clock_event_device *evt = mevt->evt; + + /* + * This is for supporting oneshot mode. + * Mct would generate interrupt periodically + * without explicit stopping. + */ + if (evt->mode != CLOCK_EVT_MODE_PERIODIC) + exynos4_mct_tick_stop(mevt); + + /* Clear the MCT tick interrupt */ + exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction mct_tick0_event_irq = { + .name = "mct_tick0_irq", + .flags = IRQF_TIMER | IRQF_NOBALANCING, + .handler = exynos4_mct_tick_isr, +}; + +static struct irqaction mct_tick1_event_irq = { + .name = "mct_tick1_irq", + .flags = IRQF_TIMER | IRQF_NOBALANCING, + .handler = exynos4_mct_tick_isr, +}; + +static void exynos4_mct_tick_init(struct clock_event_device *evt) +{ + unsigned int cpu = smp_processor_id(); + + mct_tick[cpu].evt = evt; + + if (cpu == 0) { + mct_tick[cpu].base = EXYNOS4_MCT_L0_BASE; + evt->name = "mct_tick0"; + } else { + mct_tick[cpu].base = EXYNOS4_MCT_L1_BASE; + evt->name = "mct_tick1"; + } + + evt->cpumask = cpumask_of(cpu); + evt->set_next_event = exynos4_tick_set_next_event; + evt->set_mode = exynos4_tick_set_mode; + evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + evt->rating = 450; + + clockevents_calc_mult_shift(evt, clk_rate / 2, 5); + evt->max_delta_ns = + clockevent_delta2ns(0x7fffffff, evt); + evt->min_delta_ns = + clockevent_delta2ns(0xf, evt); + + clockevents_register_device(evt); + + exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET); + + if (cpu == 0) { + mct_tick0_event_irq.dev_id = &mct_tick[cpu]; + setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq); + } else { + mct_tick1_event_irq.dev_id = &mct_tick[cpu]; + irq_set_affinity(IRQ_MCT1, cpumask_of(1)); + setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq); + } +} + +/* Setup the local clock events for a CPU */ +void __cpuinit local_timer_setup(struct clock_event_device *evt) +{ + exynos4_mct_tick_init(evt); +} + +int local_timer_ack(void) +{ + return 0; +} + +#endif /* CONFIG_LOCAL_TIMERS */ + +static void __init exynos4_timer_resources(void) +{ + struct clk *mct_clk; + mct_clk = clk_get(NULL, "xtal"); + + clk_rate = clk_get_rate(mct_clk); +} + +static void __init exynos4_timer_init(void) +{ + exynos4_timer_resources(); + exynos4_clocksource_init(); + exynos4_clockevent_init(); +} + +struct sys_timer exynos4_timer = { + .init = exynos4_timer_init, +}; diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index 34093b0..6d35878 100644 --- a/arch/arm/mach-s5pv310/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -1,7 +1,7 @@ -/* linux/arch/arm/mach-s5pv310/platsmp.c +/* linux/arch/arm/mach-exynos4/platsmp.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Cloned from linux/arch/arm/mach-vexpress/platsmp.c * @@ -28,7 +28,7 @@ #include <mach/hardware.h> #include <mach/regs-clock.h> -extern void s5pv310_secondary_startup(void); +extern void exynos4_secondary_startup(void); /* * control for which core is the next to come out of the secondary @@ -139,7 +139,7 @@ void __init smp_init_cpus(void) /* sanity check */ if (ncores > NR_CPUS) { printk(KERN_WARNING - "S5PV310: no. of cores (%d) greater than configured " + "EXYNOS4: no. of cores (%d) greater than configured " "maximum of %d - clipping\n", ncores, NR_CPUS); ncores = NR_CPUS; @@ -168,5 +168,5 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) * until it receives a soft interrupt, and then the * secondary CPU branches to this address. */ - __raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_VA_SYSRAM); + __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM); } diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c new file mode 100644 index 0000000..10d917d --- /dev/null +++ b/arch/arm/mach-exynos4/pm.c @@ -0,0 +1,420 @@ +/* linux/arch/arm/mach-exynos4/pm.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4210 - Power Management support + * + * Based on arch/arm/mach-s3c2410/pm.c + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/io.h> + +#include <asm/cacheflush.h> +#include <asm/hardware/cache-l2x0.h> + +#include <plat/cpu.h> +#include <plat/pm.h> + +#include <mach/regs-irq.h> +#include <mach/regs-gpio.h> +#include <mach/regs-clock.h> +#include <mach/regs-pmu.h> +#include <mach/pm-core.h> + +static struct sleep_save exynos4_sleep[] = { + { .reg = S5P_ARM_CORE0_LOWPWR , .val = 0x2, }, + { .reg = S5P_DIS_IRQ_CORE0 , .val = 0x0, }, + { .reg = S5P_DIS_IRQ_CENTRAL0 , .val = 0x0, }, + { .reg = S5P_ARM_CORE1_LOWPWR , .val = 0x2, }, + { .reg = S5P_DIS_IRQ_CORE1 , .val = 0x0, }, + { .reg = S5P_DIS_IRQ_CENTRAL1 , .val = 0x0, }, + { .reg = S5P_ARM_COMMON_LOWPWR , .val = 0x2, }, + { .reg = S5P_L2_0_LOWPWR , .val = 0x3, }, + { .reg = S5P_L2_1_LOWPWR , .val = 0x3, }, + { .reg = S5P_CMU_ACLKSTOP_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_SCLKSTOP_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_LOWPWR , .val = 0x0, }, + { .reg = S5P_APLL_SYSCLK_LOWPWR , .val = 0x0, }, + { .reg = S5P_MPLL_SYSCLK_LOWPWR , .val = 0x0, }, + { .reg = S5P_VPLL_SYSCLK_LOWPWR , .val = 0x0, }, + { .reg = S5P_EPLL_SYSCLK_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_GPSALIVE_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_CAM_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_TV_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_MFC_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_G3D_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_LCD0_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_LCD1_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_MAUDIO_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_CLKSTOP_GPS_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_CAM_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_TV_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_MFC_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_G3D_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_LCD0_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_LCD1_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_MAUDIO_LOWPWR , .val = 0x0, }, + { .reg = S5P_CMU_RESET_GPS_LOWPWR , .val = 0x0, }, + { .reg = S5P_TOP_BUS_LOWPWR , .val = 0x0, }, + { .reg = S5P_TOP_RETENTION_LOWPWR , .val = 0x1, }, + { .reg = S5P_TOP_PWR_LOWPWR , .val = 0x3, }, + { .reg = S5P_LOGIC_RESET_LOWPWR , .val = 0x0, }, + { .reg = S5P_ONENAND_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_MODIMIF_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_G2D_ACP_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_USBOTG_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_HSMMC_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_CSSYS_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_SECSS_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_PCIE_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_SATA_MEM_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_DRAM_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_MAUDIO_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_GPIO_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_UART_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_MMCA_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_MMCB_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_EBIA_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_EBIB_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_ISOLATION_LOWPWR , .val = 0x0, }, + { .reg = S5P_PAD_RETENTION_ALV_SEL_LOWPWR , .val = 0x0, }, + { .reg = S5P_XUSBXTI_LOWPWR , .val = 0x0, }, + { .reg = S5P_XXTI_LOWPWR , .val = 0x0, }, + { .reg = S5P_EXT_REGULATOR_LOWPWR , .val = 0x0, }, + { .reg = S5P_GPIO_MODE_LOWPWR , .val = 0x0, }, + { .reg = S5P_GPIO_MODE_MAUDIO_LOWPWR , .val = 0x0, }, + { .reg = S5P_CAM_LOWPWR , .val = 0x0, }, + { .reg = S5P_TV_LOWPWR , .val = 0x0, }, + { .reg = S5P_MFC_LOWPWR , .val = 0x0, }, + { .reg = S5P_G3D_LOWPWR , .val = 0x0, }, + { .reg = S5P_LCD0_LOWPWR , .val = 0x0, }, + { .reg = S5P_LCD1_LOWPWR , .val = 0x0, }, + { .reg = S5P_MAUDIO_LOWPWR , .val = 0x0, }, + { .reg = S5P_GPS_LOWPWR , .val = 0x0, }, + { .reg = S5P_GPS_ALIVE_LOWPWR , .val = 0x0, }, +}; + +static struct sleep_save exynos4_set_clksrc[] = { + { .reg = S5P_CLKSRC_MASK_TOP , .val = 0x00000001, }, + { .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, }, + { .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, }, + { .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, }, + { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, }, + { .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, }, + { .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, }, + { .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, }, + { .reg = S5P_CLKSRC_MASK_PERIL1 , .val = 0x01110111, }, + { .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, }, +}; + +static struct sleep_save exynos4_core_save[] = { + /* CMU side */ + SAVE_ITEM(S5P_CLKDIV_LEFTBUS), + SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), + SAVE_ITEM(S5P_CLKDIV_RIGHTBUS), + SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS), + SAVE_ITEM(S5P_EPLL_CON0), + SAVE_ITEM(S5P_EPLL_CON1), + SAVE_ITEM(S5P_VPLL_CON0), + SAVE_ITEM(S5P_VPLL_CON1), + SAVE_ITEM(S5P_CLKSRC_TOP0), + SAVE_ITEM(S5P_CLKSRC_TOP1), + SAVE_ITEM(S5P_CLKSRC_CAM), + SAVE_ITEM(S5P_CLKSRC_MFC), + SAVE_ITEM(S5P_CLKSRC_IMAGE), + SAVE_ITEM(S5P_CLKSRC_LCD0), + SAVE_ITEM(S5P_CLKSRC_LCD1), + SAVE_ITEM(S5P_CLKSRC_MAUDIO), + SAVE_ITEM(S5P_CLKSRC_FSYS), + SAVE_ITEM(S5P_CLKSRC_PERIL0), + SAVE_ITEM(S5P_CLKSRC_PERIL1), + SAVE_ITEM(S5P_CLKDIV_CAM), + SAVE_ITEM(S5P_CLKDIV_TV), + SAVE_ITEM(S5P_CLKDIV_MFC), + SAVE_ITEM(S5P_CLKDIV_G3D), + SAVE_ITEM(S5P_CLKDIV_IMAGE), + SAVE_ITEM(S5P_CLKDIV_LCD0), + SAVE_ITEM(S5P_CLKDIV_LCD1), + SAVE_ITEM(S5P_CLKDIV_MAUDIO), + SAVE_ITEM(S5P_CLKDIV_FSYS0), + SAVE_ITEM(S5P_CLKDIV_FSYS1), + SAVE_ITEM(S5P_CLKDIV_FSYS2), + SAVE_ITEM(S5P_CLKDIV_FSYS3), + SAVE_ITEM(S5P_CLKDIV_PERIL0), + SAVE_ITEM(S5P_CLKDIV_PERIL1), + SAVE_ITEM(S5P_CLKDIV_PERIL2), + SAVE_ITEM(S5P_CLKDIV_PERIL3), + SAVE_ITEM(S5P_CLKDIV_PERIL4), + SAVE_ITEM(S5P_CLKDIV_PERIL5), + SAVE_ITEM(S5P_CLKDIV_TOP), + SAVE_ITEM(S5P_CLKSRC_MASK_CAM), + SAVE_ITEM(S5P_CLKSRC_MASK_TV), + SAVE_ITEM(S5P_CLKSRC_MASK_LCD0), + SAVE_ITEM(S5P_CLKSRC_MASK_LCD1), + SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO), + SAVE_ITEM(S5P_CLKSRC_MASK_FSYS), + SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0), + SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1), + SAVE_ITEM(S5P_CLKGATE_SCLKCAM), + SAVE_ITEM(S5P_CLKGATE_IP_CAM), + SAVE_ITEM(S5P_CLKGATE_IP_TV), + SAVE_ITEM(S5P_CLKGATE_IP_MFC), + SAVE_ITEM(S5P_CLKGATE_IP_G3D), + SAVE_ITEM(S5P_CLKGATE_IP_IMAGE), + SAVE_ITEM(S5P_CLKGATE_IP_LCD0), + SAVE_ITEM(S5P_CLKGATE_IP_LCD1), + SAVE_ITEM(S5P_CLKGATE_IP_FSYS), + SAVE_ITEM(S5P_CLKGATE_IP_GPS), + SAVE_ITEM(S5P_CLKGATE_IP_PERIL), + SAVE_ITEM(S5P_CLKGATE_IP_PERIR), + SAVE_ITEM(S5P_CLKGATE_BLOCK), + SAVE_ITEM(S5P_CLKSRC_MASK_DMC), + SAVE_ITEM(S5P_CLKSRC_DMC), + SAVE_ITEM(S5P_CLKDIV_DMC0), + SAVE_ITEM(S5P_CLKDIV_DMC1), + SAVE_ITEM(S5P_CLKGATE_IP_DMC), + SAVE_ITEM(S5P_CLKSRC_CPU), + SAVE_ITEM(S5P_CLKDIV_CPU), + SAVE_ITEM(S5P_CLKGATE_SCLKCPU), + SAVE_ITEM(S5P_CLKGATE_IP_CPU), + /* GIC side */ + SAVE_ITEM(S5P_VA_GIC_CPU + 0x000), + SAVE_ITEM(S5P_VA_GIC_CPU + 0x004), + SAVE_ITEM(S5P_VA_GIC_CPU + 0x008), + SAVE_ITEM(S5P_VA_GIC_CPU + 0x00C), + SAVE_ITEM(S5P_VA_GIC_CPU + 0x014), + SAVE_ITEM(S5P_VA_GIC_CPU + 0x018), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x000), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x004), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x100), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x104), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x108), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x300), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x304), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x308), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x400), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x404), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x408), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x40C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x410), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x414), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x418), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x41C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x420), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x424), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x428), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x42C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x430), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x434), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x438), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x43C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x440), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x444), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x448), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x44C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x450), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x454), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x458), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x45C), + + SAVE_ITEM(S5P_VA_GIC_DIST + 0x800), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x804), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x808), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x80C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x810), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x814), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x818), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x81C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x820), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x824), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x828), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x82C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x830), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x834), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x838), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x83C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x840), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x844), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x848), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x84C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x850), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x854), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x858), + SAVE_ITEM(S5P_VA_GIC_DIST + 0x85C), + + SAVE_ITEM(S5P_VA_GIC_DIST + 0xC00), + SAVE_ITEM(S5P_VA_GIC_DIST + 0xC04), + SAVE_ITEM(S5P_VA_GIC_DIST + 0xC08), + SAVE_ITEM(S5P_VA_GIC_DIST + 0xC0C), + SAVE_ITEM(S5P_VA_GIC_DIST + 0xC10), + SAVE_ITEM(S5P_VA_GIC_DIST + 0xC14), + + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x000), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x010), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x020), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x030), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x040), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x050), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x060), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x070), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x080), + SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x090), +}; + +static struct sleep_save exynos4_l2cc_save[] = { + SAVE_ITEM(S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL), + SAVE_ITEM(S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL), + SAVE_ITEM(S5P_VA_L2CC + L2X0_PREFETCH_CTRL), + SAVE_ITEM(S5P_VA_L2CC + L2X0_POWER_CTRL), + SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL), +}; + +void exynos4_cpu_suspend(void) +{ + unsigned long tmp; + unsigned long mask = 0xFFFFFFFF; + + /* Setting Central Sequence Register for power down mode */ + + tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); + tmp &= ~(S5P_CENTRAL_LOWPWR_CFG); + __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); + + /* Setting Central Sequence option Register */ + + tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION); + tmp &= ~(S5P_USE_MASK); + tmp |= S5P_USE_STANDBY_WFI0; + __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); + + /* Clear all interrupt pending to avoid early wakeup */ + + __raw_writel(mask, (S5P_VA_GIC_DIST + 0x280)); + __raw_writel(mask, (S5P_VA_GIC_DIST + 0x284)); + __raw_writel(mask, (S5P_VA_GIC_DIST + 0x288)); + + /* Disable all interrupt */ + + __raw_writel(0x0, (S5P_VA_GIC_CPU + 0x000)); + __raw_writel(0x0, (S5P_VA_GIC_DIST + 0x000)); + __raw_writel(mask, (S5P_VA_GIC_DIST + 0x184)); + __raw_writel(mask, (S5P_VA_GIC_DIST + 0x188)); + + outer_flush_all(); + + /* issue the standby signal into the pm unit. */ + cpu_do_idle(); + + /* we should never get past here */ + panic("sleep resumed to originator?"); +} + +static void exynos4_pm_prepare(void) +{ + u32 tmp; + + s3c_pm_do_save(exynos4_core_save, ARRAY_SIZE(exynos4_core_save)); + s3c_pm_do_save(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); + + tmp = __raw_readl(S5P_INFORM1); + + /* Set value of power down register for sleep mode */ + + s3c_pm_do_restore_core(exynos4_sleep, ARRAY_SIZE(exynos4_sleep)); + __raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1); + + /* ensure at least INFORM0 has the resume address */ + + __raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0); + + /* Before enter central sequence mode, clock src register have to set */ + + s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc)); + +} + +static int exynos4_pm_add(struct sys_device *sysdev) +{ + pm_cpu_prep = exynos4_pm_prepare; + pm_cpu_sleep = exynos4_cpu_suspend; + + return 0; +} + +/* This function copy from linux/arch/arm/kernel/smp_scu.c */ + +void exynos4_scu_enable(void __iomem *scu_base) +{ + u32 scu_ctrl; + + scu_ctrl = __raw_readl(scu_base); + /* already enabled? */ + if (scu_ctrl & 1) + return; + + scu_ctrl |= 1; + __raw_writel(scu_ctrl, scu_base); + + /* + * Ensure that the data accessed by CPU0 before the SCU was + * initialised is visible to the other CPUs. + */ + flush_cache_all(); +} + +static int exynos4_pm_resume(struct sys_device *dev) +{ + /* For release retention */ + + __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION); + __raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION); + + s3c_pm_do_restore_core(exynos4_core_save, ARRAY_SIZE(exynos4_core_save)); + + exynos4_scu_enable(S5P_VA_SCU); + +#ifdef CONFIG_CACHE_L2X0 + s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); + outer_inv_all(); + /* enable L2X0*/ + writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL); +#endif + + return 0; +} + +static struct sysdev_driver exynos4_pm_driver = { + .add = exynos4_pm_add, + .resume = exynos4_pm_resume, +}; + +static __init int exynos4_pm_drvinit(void) +{ + unsigned int tmp; + + s3c_pm_init(); + + /* All wakeup disable */ + + tmp = __raw_readl(S5P_WAKEUP_MASK); + tmp |= ((0xFF << 8) | (0x1F << 1)); + __raw_writel(tmp, S5P_WAKEUP_MASK); + + return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver); +} +arch_initcall(exynos4_pm_drvinit); diff --git a/arch/arm/mach-exynos4/setup-fimc.c b/arch/arm/mach-exynos4/setup-fimc.c new file mode 100644 index 0000000..6a45078 --- /dev/null +++ b/arch/arm/mach-exynos4/setup-fimc.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * + * Exynos4 camera interface GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <plat/gpio-cfg.h> +#include <plat/camport.h> + +int exynos4_fimc_setup_gpio(enum s5p_camport_id id) +{ + u32 gpio8, gpio5; + u32 sfn; + int ret; + + switch (id) { + case S5P_CAMPORT_A: + gpio8 = EXYNOS4_GPJ0(0); /* PCLK, VSYNC, HREF, DATA[0:4] */ + gpio5 = EXYNOS4_GPJ1(0); /* DATA[5:7], CLKOUT, FIELD */ + sfn = S3C_GPIO_SFN(2); + break; + + case S5P_CAMPORT_B: + gpio8 = EXYNOS4_GPE0(0); /* DATA[0:7] */ + gpio5 = EXYNOS4_GPE1(0); /* PCLK, VSYNC, HREF, CLKOUT, FIELD */ + sfn = S3C_GPIO_SFN(3); + break; + + default: + WARN(1, "Wrong camport id: %d\n", id); + return -EINVAL; + } + + ret = s3c_gpio_cfgall_range(gpio8, 8, sfn, S3C_GPIO_PULL_UP); + if (ret) + return ret; + + return s3c_gpio_cfgall_range(gpio5, 5, sfn, S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv310/setup-i2c0.c b/arch/arm/mach-exynos4/setup-i2c0.c index f47f8f3..d395bd1 100644 --- a/arch/arm/mach-s5pv310/setup-i2c0.c +++ b/arch/arm/mach-exynos4/setup-i2c0.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/setup-i2c0.c + * linux/arch/arm/mach-exynos4/setup-i2c0.c * * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -21,6 +21,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV310_GPD1(0), 2, + s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2, S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c1.c b/arch/arm/mach-exynos4/setup-i2c1.c index 9d07e4e..fd7235a 100644 --- a/arch/arm/mach-s5pv310/setup-i2c1.c +++ b/arch/arm/mach-exynos4/setup-i2c1.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/setup-i2c1.c + * linux/arch/arm/mach-exynos4/setup-i2c1.c * * Copyright (C) 2010 Samsung Electronics Co., Ltd. * @@ -18,6 +18,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c1_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV310_GPD1(2), 2, + s3c_gpio_cfgall_range(EXYNOS4_GPD1(2), 2, S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c2.c b/arch/arm/mach-exynos4/setup-i2c2.c index 4163b12..2694b19 100644 --- a/arch/arm/mach-s5pv310/setup-i2c2.c +++ b/arch/arm/mach-exynos4/setup-i2c2.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/setup-i2c2.c + * linux/arch/arm/mach-exynos4/setup-i2c2.c * * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. * @@ -18,6 +18,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c2_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV310_GPA0(6), 2, + s3c_gpio_cfgall_range(EXYNOS4_GPA0(6), 2, S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c3.c b/arch/arm/mach-exynos4/setup-i2c3.c index 180f153..379bd30 100644 --- a/arch/arm/mach-s5pv310/setup-i2c3.c +++ b/arch/arm/mach-exynos4/setup-i2c3.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/setup-i2c3.c + * linux/arch/arm/mach-exynos4/setup-i2c3.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * @@ -18,6 +18,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c3_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV310_GPA1(2), 2, + s3c_gpio_cfgall_range(EXYNOS4_GPA1(2), 2, S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c4.c b/arch/arm/mach-exynos4/setup-i2c4.c index 909e8df..9f3c048 100644 --- a/arch/arm/mach-s5pv310/setup-i2c4.c +++ b/arch/arm/mach-exynos4/setup-i2c4.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/setup-i2c4.c + * linux/arch/arm/mach-exynos4/setup-i2c4.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * @@ -18,6 +18,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c4_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV310_GPB(2), 2, + s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2, S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c5.c b/arch/arm/mach-exynos4/setup-i2c5.c index 5d0fa4a..77e1a1e 100644 --- a/arch/arm/mach-s5pv310/setup-i2c5.c +++ b/arch/arm/mach-exynos4/setup-i2c5.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/setup-i2c5.c + * linux/arch/arm/mach-exynos4/setup-i2c5.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * @@ -18,6 +18,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c5_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV310_GPB(6), 2, + s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2, S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c6.c b/arch/arm/mach-exynos4/setup-i2c6.c index 34aafab..284d12b 100644 --- a/arch/arm/mach-s5pv310/setup-i2c6.c +++ b/arch/arm/mach-exynos4/setup-i2c6.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/setup-i2c6.c + * linux/arch/arm/mach-exynos4/setup-i2c6.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * @@ -18,6 +18,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c6_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV310_GPC1(3), 2, + s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2, S3C_GPIO_SFN(4), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s5pv310/setup-i2c7.c b/arch/arm/mach-exynos4/setup-i2c7.c index 9b25b8d..b7611ee 100644 --- a/arch/arm/mach-s5pv310/setup-i2c7.c +++ b/arch/arm/mach-exynos4/setup-i2c7.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-s5pv310/setup-i2c7.c + * linux/arch/arm/mach-exynos4/setup-i2c7.c * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * @@ -18,6 +18,6 @@ struct platform_device; /* don't need the contents */ void s3c_i2c7_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgall_range(S5PV310_GPD0(2), 2, + s3c_gpio_cfgall_range(EXYNOS4_GPD0(2), 2, S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-exynos4/setup-keypad.c b/arch/arm/mach-exynos4/setup-keypad.c new file mode 100644 index 0000000..1ee0ebf --- /dev/null +++ b/arch/arm/mach-exynos4/setup-keypad.c @@ -0,0 +1,35 @@ +/* linux/arch/arm/mach-exynos4/setup-keypad.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * GPIO configuration for Exynos4 KeyPad device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/gpio.h> +#include <plat/gpio-cfg.h> + +void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) +{ + /* Keypads can be of various combinations, Just making sure */ + + if (rows > 8) { + /* Set all the necessary GPX2 pins: KP_ROW[0~7] */ + s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3)); + + /* Set all the necessary GPX3 pins: KP_ROW[8~] */ + s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8), + S3C_GPIO_SFN(3)); + } else { + /* Set all the necessary GPX2 pins: KP_ROW[x] */ + s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows, + S3C_GPIO_SFN(3)); + } + + /* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */ + s3c_gpio_cfgrange_nopull(EXYNOS4_GPX1(0), cols, S3C_GPIO_SFN(3)); +} diff --git a/arch/arm/mach-s5pv310/setup-sdhci-gpio.c b/arch/arm/mach-exynos4/setup-sdhci-gpio.c index 86d38cc..1b3d3a2d 100644 --- a/arch/arm/mach-s5pv310/setup-sdhci-gpio.c +++ b/arch/arm/mach-exynos4/setup-sdhci-gpio.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/setup-sdhci-gpio.c +/* linux/arch/arm/mach-exynos4/setup-sdhci-gpio.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) + * EXYNOS4 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -23,13 +23,13 @@ #include <plat/regs-sdhci.h> #include <plat/sdhci.h> -void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) +void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; unsigned int gpio; /* Set all the necessary GPK0[0:1] pins to special-function 2 */ - for (gpio = S5PV310_GPK0(0); gpio < S5PV310_GPK0(2); gpio++) { + for (gpio = EXYNOS4_GPK0(0); gpio < EXYNOS4_GPK0(2); gpio++) { s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); @@ -37,14 +37,14 @@ void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) switch (width) { case 8: - for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) { + for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { /* Data pin GPK1[3:6] to special-funtion 3 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } case 4: - for (gpio = S5PV310_GPK0(3); gpio <= S5PV310_GPK0(6); gpio++) { + for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) { /* Data pin GPK0[3:6] to special-funtion 2 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); @@ -55,25 +55,25 @@ void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) } if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(S5PV310_GPK0(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV310_GPK0(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(EXYNOS4_GPK0(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(EXYNOS4_GPK0(2), S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } } -void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) +void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; unsigned int gpio; /* Set all the necessary GPK1[0:1] pins to special-function 2 */ - for (gpio = S5PV310_GPK1(0); gpio < S5PV310_GPK1(2); gpio++) { + for (gpio = EXYNOS4_GPK1(0); gpio < EXYNOS4_GPK1(2); gpio++) { s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } - for (gpio = S5PV310_GPK1(3); gpio <= S5PV310_GPK1(6); gpio++) { + for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) { /* Data pin GPK1[3:6] to special-function 2 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); @@ -81,19 +81,19 @@ void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) } if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(S5PV310_GPK1(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV310_GPK1(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(EXYNOS4_GPK1(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(EXYNOS4_GPK1(2), S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } } -void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) +void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; unsigned int gpio; /* Set all the necessary GPK2[0:1] pins to special-function 2 */ - for (gpio = S5PV310_GPK2(0); gpio < S5PV310_GPK2(2); gpio++) { + for (gpio = EXYNOS4_GPK2(0); gpio < EXYNOS4_GPK2(2); gpio++) { s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); @@ -101,14 +101,14 @@ void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) switch (width) { case 8: - for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) { + for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) { /* Data pin GPK3[3:6] to special-function 3 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } case 4: - for (gpio = S5PV310_GPK2(3); gpio <= S5PV310_GPK2(6); gpio++) { + for (gpio = EXYNOS4_GPK2(3); gpio <= EXYNOS4_GPK2(6); gpio++) { /* Data pin GPK2[3:6] to special-function 2 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); @@ -119,25 +119,25 @@ void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width) } if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(S5PV310_GPK2(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV310_GPK2(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(EXYNOS4_GPK2(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(EXYNOS4_GPK2(2), S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } } -void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) +void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) { struct s3c_sdhci_platdata *pdata = dev->dev.platform_data; unsigned int gpio; /* Set all the necessary GPK3[0:1] pins to special-function 2 */ - for (gpio = S5PV310_GPK3(0); gpio < S5PV310_GPK3(2); gpio++) { + for (gpio = EXYNOS4_GPK3(0); gpio < EXYNOS4_GPK3(2); gpio++) { s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } - for (gpio = S5PV310_GPK3(3); gpio <= S5PV310_GPK3(6); gpio++) { + for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) { /* Data pin GPK3[3:6] to special-function 2 */ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); @@ -145,8 +145,8 @@ void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width) } if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) { - s3c_gpio_cfgpin(S5PV310_GPK3(2), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5PV310_GPK3(2), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(EXYNOS4_GPK3(2), S3C_GPIO_SFN(2)); + s3c_gpio_setpull(EXYNOS4_GPK3(2), S3C_GPIO_PULL_UP); s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4); } } diff --git a/arch/arm/mach-s5pv310/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c index db8358f..85f9433 100644 --- a/arch/arm/mach-s5pv310/setup-sdhci.c +++ b/arch/arm/mach-exynos4/setup-sdhci.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/setup-sdhci.c +/* linux/arch/arm/mach-exynos4/setup-sdhci.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * - * S5PV310 - Helper functions for settign up SDHCI device(s) (HSMMC) + * EXYNOS4 - Helper functions for settign up SDHCI device(s) (HSMMC) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -23,14 +23,14 @@ /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ -char *s5pv310_hsmmc_clksrcs[4] = { +char *exynos4_hsmmc_clksrcs[4] = { [0] = NULL, [1] = NULL, [2] = "sclk_mmc", /* mmc_bus */ [3] = NULL, }; -void s5pv310_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, +void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, struct mmc_ios *ios, struct mmc_card *card) { u32 ctrl2, ctrl3; diff --git a/arch/arm/mach-exynos4/sleep.S b/arch/arm/mach-exynos4/sleep.S new file mode 100644 index 0000000..6b62425 --- /dev/null +++ b/arch/arm/mach-exynos4/sleep.S @@ -0,0 +1,76 @@ +/* linux/arch/arm/mach-exynos4/sleep.S + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4210 power Manager (Suspend-To-RAM) support + * Based on S3C2410 sleep code by: + * Ben Dooks, (c) 2004 Simtec Electronics + * + * Based on PXA/SA1100 sleep code by: + * Nicolas Pitre, (c) 2002 Monta Vista Software Inc + * Cliff Brake, (c) 2001 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <asm/memory.h> + + .text + + /* + * s3c_cpu_save + * + * entry: + * r1 = v:p offset + */ + +ENTRY(s3c_cpu_save) + + stmfd sp!, { r3 - r12, lr } + ldr r3, =resume_with_mmu + bl cpu_suspend + + ldr r0, =pm_cpu_sleep + ldr r0, [ r0 ] + mov pc, r0 + +resume_with_mmu: + ldmfd sp!, { r3 - r12, pc } + + .ltorg + + /* + * sleep magic, to allow the bootloader to check for an valid + * image to resume to. Must be the first word before the + * s3c_cpu_resume entry. + */ + + .word 0x2bedf00d + + /* + * s3c_cpu_resume + * + * resume code entry for bootloader to call + * + * we must put this code here in the data segment as we have no + * other way of restoring the stack pointer after sleep, and we + * must not write to the code segment (code is read-only) + */ + +ENTRY(s3c_cpu_resume) + b cpu_resume diff --git a/arch/arm/mach-s5pv310/time.c b/arch/arm/mach-exynos4/time.c index b262d46..86b9fa0 100644 --- a/arch/arm/mach-s5pv310/time.c +++ b/arch/arm/mach-exynos4/time.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s5pv310/time.c +/* linux/arch/arm/mach-exynos4/time.c * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * - * S5PV310 (and compatible) HRT support + * EXYNOS4 (and compatible) HRT support * PWM 2/4 is used for this feature * * This program is free software; you can redistribute it and/or modify @@ -33,7 +33,7 @@ static struct clk *tdiv2; static struct clk *tdiv4; static struct clk *timerclk; -static void s5pv310_pwm_stop(unsigned int pwm_id) +static void exynos4_pwm_stop(unsigned int pwm_id) { unsigned long tcon; @@ -52,7 +52,7 @@ static void s5pv310_pwm_stop(unsigned int pwm_id) __raw_writel(tcon, S3C2410_TCON); } -static void s5pv310_pwm_init(unsigned int pwm_id, unsigned long tcnt) +static void exynos4_pwm_init(unsigned int pwm_id, unsigned long tcnt) { unsigned long tcon; @@ -86,7 +86,7 @@ static void s5pv310_pwm_init(unsigned int pwm_id, unsigned long tcnt) } } -static inline void s5pv310_pwm_start(unsigned int pwm_id, bool periodic) +static inline void exynos4_pwm_start(unsigned int pwm_id, bool periodic) { unsigned long tcon; @@ -117,23 +117,23 @@ static inline void s5pv310_pwm_start(unsigned int pwm_id, bool periodic) __raw_writel(tcon, S3C2410_TCON); } -static int s5pv310_pwm_set_next_event(unsigned long cycles, +static int exynos4_pwm_set_next_event(unsigned long cycles, struct clock_event_device *evt) { - s5pv310_pwm_init(2, cycles); - s5pv310_pwm_start(2, 0); + exynos4_pwm_init(2, cycles); + exynos4_pwm_start(2, 0); return 0; } -static void s5pv310_pwm_set_mode(enum clock_event_mode mode, +static void exynos4_pwm_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { - s5pv310_pwm_stop(2); + exynos4_pwm_stop(2); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - s5pv310_pwm_init(2, clock_count_per_tick); - s5pv310_pwm_start(2, 1); + exynos4_pwm_init(2, clock_count_per_tick); + exynos4_pwm_start(2, 1); break; case CLOCK_EVT_MODE_ONESHOT: break; @@ -149,11 +149,11 @@ static struct clock_event_device pwm_event_device = { .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .rating = 200, .shift = 32, - .set_next_event = s5pv310_pwm_set_next_event, - .set_mode = s5pv310_pwm_set_mode, + .set_next_event = exynos4_pwm_set_next_event, + .set_mode = exynos4_pwm_set_mode, }; -irqreturn_t s5pv310_clock_event_isr(int irq, void *dev_id) +irqreturn_t exynos4_clock_event_isr(int irq, void *dev_id) { struct clock_event_device *evt = &pwm_event_device; @@ -162,13 +162,13 @@ irqreturn_t s5pv310_clock_event_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction s5pv310_clock_event_irq = { +static struct irqaction exynos4_clock_event_irq = { .name = "pwm_timer2_irq", .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = s5pv310_clock_event_isr, + .handler = exynos4_clock_event_isr, }; -static void __init s5pv310_clockevent_init(void) +static void __init exynos4_clockevent_init(void) { unsigned long pclk; unsigned long clock_rate; @@ -198,23 +198,39 @@ static void __init s5pv310_clockevent_init(void) pwm_event_device.cpumask = cpumask_of(0); clockevents_register_device(&pwm_event_device); - setup_irq(IRQ_TIMER2, &s5pv310_clock_event_irq); + setup_irq(IRQ_TIMER2, &exynos4_clock_event_irq); } -static cycle_t s5pv310_pwm4_read(struct clocksource *cs) +static cycle_t exynos4_pwm4_read(struct clocksource *cs) { return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40)); } +static void exynos4_pwm4_resume(struct clocksource *cs) +{ + unsigned long pclk; + + pclk = clk_get_rate(timerclk); + + clk_set_rate(tdiv4, pclk / 2); + clk_set_parent(tin4, tdiv4); + + exynos4_pwm_init(4, ~0); + exynos4_pwm_start(4, 1); +} + struct clocksource pwm_clocksource = { .name = "pwm_timer4", .rating = 250, - .read = s5pv310_pwm4_read, + .read = exynos4_pwm4_read, .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS , +#ifdef CONFIG_PM + .resume = exynos4_pwm4_resume, +#endif }; -static void __init s5pv310_clocksource_init(void) +static void __init exynos4_clocksource_init(void) { unsigned long pclk; unsigned long clock_rate; @@ -226,14 +242,14 @@ static void __init s5pv310_clocksource_init(void) clock_rate = clk_get_rate(tin4); - s5pv310_pwm_init(4, ~0); - s5pv310_pwm_start(4, 1); + exynos4_pwm_init(4, ~0); + exynos4_pwm_start(4, 1); if (clocksource_register_hz(&pwm_clocksource, clock_rate)) panic("%s: can't register clocksource\n", pwm_clocksource.name); } -static void __init s5pv310_timer_resources(void) +static void __init exynos4_timer_resources(void) { struct platform_device tmpdev; @@ -267,17 +283,17 @@ static void __init s5pv310_timer_resources(void) clk_enable(tin4); } -static void __init s5pv310_timer_init(void) +static void __init exynos4_timer_init(void) { #ifdef CONFIG_LOCAL_TIMERS twd_base = S5P_VA_TWD; #endif - s5pv310_timer_resources(); - s5pv310_clockevent_init(); - s5pv310_clocksource_init(); + exynos4_timer_resources(); + exynos4_clockevent_init(); + exynos4_clocksource_init(); } -struct sys_timer s5pv310_timer = { - .init = s5pv310_timer_init, +struct sys_timer exynos4_timer = { + .init = exynos4_timer_init, }; diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 9f2c14e..d217ef3 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -58,6 +58,9 @@ #include <linux/mfd/pcf50633/pmic.h> #include <linux/mfd/pcf50633/backlight.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> + #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -86,6 +89,8 @@ #include <plat/udc.h> #include <plat/gpio-cfg.h> #include <plat/iic.h> +#include <plat/ts.h> + static struct pcf50633 *gta02_pcf; @@ -280,9 +285,6 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .always_on = 1, .apply_uV = 1, - .state_mem = { - .enabled = 1, - }, }, }, [PCF50633_REGULATOR_DOWN1] = { @@ -301,9 +303,6 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .apply_uV = 1, .always_on = 1, - .state_mem = { - .enabled = 1, - }, }, }, [PCF50633_REGULATOR_HCLDO] = { @@ -311,8 +310,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .min_uV = 2000000, .max_uV = 3300000, .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, }, }, [PCF50633_REGULATOR_LDO1] = { @@ -320,10 +319,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .min_uV = 3300000, .max_uV = 3300000, .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, .apply_uV = 1, - .state_mem = { - .enabled = 0, - }, }, }, [PCF50633_REGULATOR_LDO2] = { @@ -347,6 +344,7 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .min_uV = 3200000, .max_uV = 3200000, .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, .apply_uV = 1, }, }, @@ -355,10 +353,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .min_uV = 3000000, .max_uV = 3000000, .valid_modes_mask = REGULATOR_MODE_NORMAL, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, .apply_uV = 1, - .state_mem = { - .enabled = 1, - }, }, }, [PCF50633_REGULATOR_LDO6] = { @@ -373,9 +369,6 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .min_uV = 1800000, .max_uV = 1800000, .valid_modes_mask = REGULATOR_MODE_NORMAL, - .state_mem = { - .enabled = 1, - }, }, }, @@ -489,6 +482,43 @@ static struct s3c2410_hcd_info gta02_usb_info __initdata = { }, }; +/* Touchscreen */ +static struct s3c2410_ts_mach_info gta02_ts_info = { + .delay = 10000, + .presc = 0xff, /* slow as we can go */ + .oversampling_shift = 2, +}; + +/* Buttons */ +static struct gpio_keys_button gta02_buttons[] = { + { + .gpio = GTA02_GPIO_AUX_KEY, + .code = KEY_PHONE, + .desc = "Aux", + .type = EV_KEY, + .debounce_interval = 100, + }, + { + .gpio = GTA02_GPIO_HOLD_KEY, + .code = KEY_PAUSE, + .desc = "Hold", + .type = EV_KEY, + .debounce_interval = 100, + }, +}; + +static struct gpio_keys_platform_data gta02_buttons_pdata = { + .buttons = gta02_buttons, + .nbuttons = ARRAY_SIZE(gta02_buttons), +}; + +static struct platform_device gta02_buttons_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = >a02_buttons_pdata, + }, +}; static void __init gta02_map_io(void) { @@ -509,7 +539,11 @@ static struct platform_device *gta02_devices[] __initdata = { >a02_nor_flash, &s3c24xx_pwm_device, &s3c_device_iis, + &samsung_asoc_dma, &s3c_device_i2c0, + >a02_buttons_device, + &s3c_device_adc, + &s3c_device_ts, }; /* These guys DO need to be children of PMU. */ @@ -559,6 +593,7 @@ static void __init gta02_machine_init(void) #endif s3c24xx_udc_set_platdata(>a02_udc_cfg); + s3c24xx_ts_set_platdata(>a02_ts_info); s3c_ohci_set_platdata(>a02_usb_info); s3c_nand_set_platdata(>a02_nand_info); s3c_i2c0_set_platdata(NULL); @@ -567,6 +602,8 @@ static void __init gta02_machine_init(void) platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices)); pm_power_off = gta02_poweroff; + + regulator_has_full_constraints(); } diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 579d2f0..e4177e2 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -143,6 +143,7 @@ config MACH_SMDK6410 select S3C_DEV_USB_HSOTG select S3C_DEV_WDT select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM select HAVE_S3C2410_WATCHDOG if WATCHDOG select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_I2C1 @@ -231,7 +232,7 @@ config MACH_HMT select S3C_DEV_NAND select S3C_DEV_USB_HOST select S3C64XX_SETUP_FB_24BPP - select HAVE_PWM + select SAMSUNG_DEV_PWM help Machine support for the Airgoo HMT @@ -249,8 +250,8 @@ config MACH_SMARTQ select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_FB_24BPP select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS - select HAVE_PWM help Shared machine support for SmartQ 5/7 diff --git a/arch/arm/mach-s3c64xx/cpufreq.c b/arch/arm/mach-s3c64xx/cpufreq.c index 74c0e83..4375b97 100644 --- a/arch/arm/mach-s3c64xx/cpufreq.c +++ b/arch/arm/mach-s3c64xx/cpufreq.c @@ -181,7 +181,7 @@ static void __init s3c64xx_cpufreq_config_regulator(void) } #endif -static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) +static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) { int ret; struct cpufreq_frequency_table *freq; diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index a80a316..686a4f2 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -29,6 +29,7 @@ #include <linux/smsc911x.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> +#include <linux/pwm_backlight.h> #ifdef CONFIG_SMDK6410_WM1190_EV1 #include <linux/mfd/wm8350/core.h> @@ -49,6 +50,7 @@ #include <mach/hardware.h> #include <mach/regs-fb.h> #include <mach/map.h> +#include <mach/gpio-bank-f.h> #include <asm/irq.h> #include <asm/mach-types.h> @@ -119,7 +121,6 @@ static void smdk6410_lcd_power_set(struct plat_lcd_data *pd, { if (power) { gpio_direction_output(S3C64XX_GPF(13), 1); - gpio_direction_output(S3C64XX_GPF(15), 1); /* fire nRESET on power up */ gpio_direction_output(S3C64XX_GPN(5), 0); @@ -127,7 +128,6 @@ static void smdk6410_lcd_power_set(struct plat_lcd_data *pd, gpio_direction_output(S3C64XX_GPN(5), 1); msleep(1); } else { - gpio_direction_output(S3C64XX_GPF(15), 0); gpio_direction_output(S3C64XX_GPF(13), 0); } } @@ -270,6 +270,45 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = { .cols = 8, }; +static int smdk6410_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(S3C64XX_GPF(15), "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); + return ret; + } + + /* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */ + s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); + + return 0; +} + +static void smdk6410_backlight_exit(struct device *dev) +{ + s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT); + gpio_free(S3C64XX_GPF(15)); +} + +static struct platform_pwm_backlight_data smdk6410_backlight_data = { + .pwm_id = 1, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = smdk6410_backlight_init, + .exit = smdk6410_backlight_exit, +}; + +static struct platform_device smdk6410_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[1].dev, + .platform_data = &smdk6410_backlight_data, + }, +}; + static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { @@ -299,6 +338,8 @@ static struct platform_device *smdk6410_devices[] __initdata = { &s3c_device_rtc, &s3c_device_ts, &s3c_device_wdt, + &s3c_device_timer[1], + &smdk6410_backlight_device, }; #ifdef CONFIG_REGULATOR @@ -694,7 +735,6 @@ static void __init smdk6410_machine_init(void) gpio_request(S3C64XX_GPN(5), "LCD power"); gpio_request(S3C64XX_GPF(13), "LCD power"); - gpio_request(S3C64XX_GPF(15), "LCD power"); i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index 164d278..017af4c 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -10,12 +10,14 @@ if ARCH_S5P64X0 config CPU_S5P6440 bool select S3C_PL330_DMA + select S5P_HRT help Enable S5P6440 CPU support config CPU_S5P6450 bool select S3C_PL330_DMA + select S5P_HRT help Enable S5P6450 CPU support @@ -34,6 +36,7 @@ config MACH_SMDK6440 select S3C_DEV_WDT select S3C64XX_DEV_SPI select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5P64X0_SETUP_I2C1 help @@ -47,6 +50,7 @@ config MACH_SMDK6450 select S3C_DEV_WDT select S3C64XX_DEV_SPI select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5P64X0_SETUP_I2C1 help diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index e5beb84..2d559f1 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -22,6 +22,7 @@ #include <linux/module.h> #include <linux/clk.h> #include <linux/gpio.h> +#include <linux/pwm_backlight.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -32,6 +33,7 @@ #include <mach/map.h> #include <mach/regs-clock.h> #include <mach/i2c.h> +#include <mach/regs-gpio.h> #include <plat/regs-serial.h> #include <plat/gpio-cfg.h> @@ -43,6 +45,7 @@ #include <plat/pll.h> #include <plat/adc.h> #include <plat/ts.h> +#include <plat/s5p-time.h> #define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -88,6 +91,45 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { }, }; +static int smdk6440_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(S5P6440_GPF(15), "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); + return ret; + } + + /* Configure GPIO pin with S5P6440_GPF15_PWM_TOUT1 */ + s3c_gpio_cfgpin(S5P6440_GPF(15), S3C_GPIO_SFN(2)); + + return 0; +} + +static void smdk6440_backlight_exit(struct device *dev) +{ + s3c_gpio_cfgpin(S5P6440_GPF(15), S3C_GPIO_OUTPUT); + gpio_free(S5P6440_GPF(15)); +} + +static struct platform_pwm_backlight_data smdk6440_backlight_data = { + .pwm_id = 1, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = smdk6440_backlight_init, + .exit = smdk6440_backlight_exit, +}; + +static struct platform_device smdk6440_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[1].dev, + .platform_data = &smdk6440_backlight_data, + }, +}; + static struct platform_device *smdk6440_devices[] __initdata = { &s3c_device_adc, &s3c_device_rtc, @@ -97,6 +139,8 @@ static struct platform_device *smdk6440_devices[] __initdata = { &s3c_device_wdt, &samsung_asoc_dma, &s5p6440_device_iis, + &s3c_device_timer[1], + &smdk6440_backlight_device, }; static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = { @@ -136,6 +180,7 @@ static void __init smdk6440_map_io(void) s5p_init_io(NULL, 0, S5P64X0_SYS_ID); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs)); + s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } static void __init smdk6440_machine_init(void) @@ -159,5 +204,5 @@ MACHINE_START(SMDK6440, "SMDK6440") .init_irq = s5p6440_init_irq, .map_io = smdk6440_map_io, .init_machine = smdk6440_machine_init, - .timer = &s3c24xx_timer, + .timer = &s5p_timer, MACHINE_END diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index 3a20de0..d19c469 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -22,6 +22,7 @@ #include <linux/module.h> #include <linux/clk.h> #include <linux/gpio.h> +#include <linux/pwm_backlight.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -32,6 +33,7 @@ #include <mach/map.h> #include <mach/regs-clock.h> #include <mach/i2c.h> +#include <mach/regs-gpio.h> #include <plat/regs-serial.h> #include <plat/gpio-cfg.h> @@ -43,6 +45,7 @@ #include <plat/pll.h> #include <plat/adc.h> #include <plat/ts.h> +#include <plat/s5p-time.h> #define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -106,6 +109,45 @@ static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = { #endif }; +static int smdk6450_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(S5P6450_GPF(15), "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); + return ret; + } + + /* Configure GPIO pin with S5P6450_GPF15_PWM_TOUT1 */ + s3c_gpio_cfgpin(S5P6450_GPF(15), S3C_GPIO_SFN(2)); + + return 0; +} + +static void smdk6450_backlight_exit(struct device *dev) +{ + s3c_gpio_cfgpin(S5P6450_GPF(15), S3C_GPIO_OUTPUT); + gpio_free(S5P6450_GPF(15)); +} + +static struct platform_pwm_backlight_data smdk6450_backlight_data = { + .pwm_id = 1, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = smdk6450_backlight_init, + .exit = smdk6450_backlight_exit, +}; + +static struct platform_device smdk6450_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[1].dev, + .platform_data = &smdk6450_backlight_data, + }, +}; + static struct platform_device *smdk6450_devices[] __initdata = { &s3c_device_adc, &s3c_device_rtc, @@ -115,6 +157,8 @@ static struct platform_device *smdk6450_devices[] __initdata = { &s3c_device_wdt, &samsung_asoc_dma, &s5p6450_device_iis0, + &s3c_device_timer[1], + &smdk6450_backlight_device, /* s5p6450_device_spi0 will be added */ }; @@ -155,6 +199,7 @@ static void __init smdk6450_map_io(void) s5p_init_io(NULL, 0, S5P64X0_SYS_ID); s3c24xx_init_clocks(19200000); s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs)); + s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } static void __init smdk6450_machine_init(void) @@ -178,5 +223,5 @@ MACHINE_START(SMDK6450, "SMDK6450") .init_irq = s5p6450_init_irq, .map_io = smdk6450_map_io, .init_machine = smdk6450_machine_init, - .timer = &s3c24xx_timer, + .timer = &s5p_timer, MACHINE_END diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index b8fbf2f..608722f 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -58,6 +58,7 @@ config MACH_SMDKC100 select SAMSUNG_DEV_ADC select SAMSUNG_DEV_IDE select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5PC100_SETUP_FB_24BPP select S5PC100_SETUP_I2C1 diff --git a/arch/arm/mach-s5pc100/gpiolib.c b/arch/arm/mach-s5pc100/gpiolib.c index 20856eb..2842394 100644 --- a/arch/arm/mach-s5pc100/gpiolib.c +++ b/arch/arm/mach-s5pc100/gpiolib.c @@ -348,6 +348,7 @@ static __init int s5pc100_gpiolib_init(void) } samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips); + s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); return 0; } diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index dd192a2..0525cb3 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -23,12 +23,15 @@ #include <linux/fb.h> #include <linux/delay.h> #include <linux/input.h> +#include <linux/pwm_backlight.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/map.h> #include <mach/regs-fb.h> +#include <mach/regs-gpio.h> + #include <video/platform_lcd.h> #include <asm/irq.h> @@ -107,9 +110,6 @@ static struct i2c_board_info i2c_devs1[] __initdata = { static void smdkc100_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) { - /* backlight */ - gpio_direction_output(S5PC100_GPD(0), power); - if (power) { /* module reset */ gpio_direction_output(S5PC100_GPH0(6), 1); @@ -179,6 +179,45 @@ static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = { .cols = 8, }; +static int smdkc100_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(S5PC100_GPD(0), "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPF for PWM-OUT0\n"); + return ret; + } + + /* Configure GPIO pin with S5PC100_GPD_TOUT_0 */ + s3c_gpio_cfgpin(S5PC100_GPD(0), S3C_GPIO_SFN(2)); + + return 0; +} + +static void smdkc100_backlight_exit(struct device *dev) +{ + s3c_gpio_cfgpin(S5PC100_GPD(0), S3C_GPIO_OUTPUT); + gpio_free(S5PC100_GPD(0)); +} + +static struct platform_pwm_backlight_data smdkc100_backlight_data = { + .pwm_id = 0, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = smdkc100_backlight_init, + .exit = smdkc100_backlight_exit, +}; + +static struct platform_device smdkc100_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[0].dev, + .platform_data = &smdkc100_backlight_data, + }, +}; + static struct platform_device *smdkc100_devices[] __initdata = { &s3c_device_adc, &s3c_device_cfcon, @@ -200,6 +239,8 @@ static struct platform_device *smdkc100_devices[] __initdata = { &s5p_device_fimc1, &s5p_device_fimc2, &s5pc100_device_spdif, + &s3c_device_timer[0], + &smdkc100_backlight_device, }; static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { @@ -233,7 +274,6 @@ static void __init smdkc100_machine_init(void) s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD); /* LCD init */ - gpio_request(S5PC100_GPD(0), "GPD"); gpio_request(S5PC100_GPH0(6), "GPH0"); smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0); platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices)); diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 53aabef..37b5a97 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -13,6 +13,7 @@ config CPU_S5PV210 bool select S3C_PL330_DMA select S5P_EXT_INT + select S5P_HRT select S5PV210_PM if PM help Enable S5PV210 CPU support @@ -53,6 +54,11 @@ config S5PV210_SETUP_SDHCI_GPIO help Common setup code for SDHCI gpio. +config S5PV210_SETUP_FIMC + bool + help + Common setup code for the camera interfaces. + menu "S5PC110 Machines" config MACH_AQUILA @@ -130,6 +136,7 @@ config MACH_SMDKV210 select SAMSUNG_DEV_ADC select SAMSUNG_DEV_IDE select SAMSUNG_DEV_KEYPAD + select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5PV210_SETUP_FB_24BPP select S5PV210_SETUP_I2C1 diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index ff1a0db..11f1790 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -31,6 +31,7 @@ obj-y += dev-audio.o obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o +obj-$(CONFIG_S5PV210_SETUP_FIMC) += setup-fimc.o obj-$(CONFIG_S5PV210_SETUP_I2C1) += setup-i2c1.o obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o obj-$(CONFIG_S5PV210_SETUP_IDE) += setup-ide.o diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c index ab673ef..1ba20a7 100644 --- a/arch/arm/mach-s5pv210/gpiolib.c +++ b/arch/arm/mach-s5pv210/gpiolib.c @@ -281,6 +281,7 @@ static __init int s5pv210_gpiolib_init(void) } samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips); + s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); return 0; } diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index 4c45b74..78925c5 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -146,6 +146,10 @@ #define S5P_OM_STAT S5P_CLKREG(0xE100) #define S5P_USB_PHY_CONTROL S5P_CLKREG(0xE80C) #define S5P_DAC_CONTROL S5P_CLKREG(0xE810) +#define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814) +#define S5P_MIPI_DPHY_ENABLE (1 << 0) +#define S5P_MIPI_DPHY_SRESETN (1 << 1) +#define S5P_MIPI_DPHY_MRESETN (1 << 2) #define S5P_INFORM0 S5P_CLKREG(0xF000) #define S5P_INFORM1 S5P_CLKREG(0xF004) @@ -161,7 +165,6 @@ #define S5P_MDNIE_SEL S5P_CLKREG(0x7008) #define S5P_MIPI_PHY_CON0 S5P_CLKREG(0x7200) #define S5P_MIPI_PHY_CON1 S5P_CLKREG(0x7204) -#define S5P_MIPI_DPHY_CONTROL S5P_CLKREG(0xE814) #define S5P_IDLE_CFG_TL_MASK (3 << 30) #define S5P_IDLE_CFG_TM_MASK (3 << 28) diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 557add4..4e1d8ff 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -39,6 +39,7 @@ #include <plat/fb.h> #include <plat/fimc-core.h> #include <plat/sdhci.h> +#include <plat/s5p-time.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -296,13 +297,11 @@ static struct regulator_init_data aquila_ldo17_data = { }; /* BUCK */ -static struct regulator_consumer_supply buck1_consumer[] = { - { .supply = "vddarm", }, -}; +static struct regulator_consumer_supply buck1_consumer = + REGULATOR_SUPPLY("vddarm", NULL); -static struct regulator_consumer_supply buck2_consumer[] = { - { .supply = "vddint", }, -}; +static struct regulator_consumer_supply buck2_consumer = + REGULATOR_SUPPLY("vddint", NULL); static struct regulator_init_data aquila_buck1_data = { .constraints = { @@ -313,8 +312,8 @@ static struct regulator_init_data aquila_buck1_data = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(buck1_consumer), - .consumer_supplies = buck1_consumer, + .num_consumer_supplies = 1, + .consumer_supplies = &buck1_consumer, }; static struct regulator_init_data aquila_buck2_data = { @@ -326,8 +325,8 @@ static struct regulator_init_data aquila_buck2_data = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(buck2_consumer), - .consumer_supplies = buck2_consumer, + .num_consumer_supplies = 1, + .consumer_supplies = &buck2_consumer, }; static struct regulator_init_data aquila_buck3_data = { @@ -391,26 +390,14 @@ static struct max8998_platform_data aquila_max8998_pdata = { #endif static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { - { - .dev_name = "5-001a", - .supply = "DBVDD", - }, { - .dev_name = "5-001a", - .supply = "AVDD2", - }, { - .dev_name = "5-001a", - .supply = "CPVDD", - }, + REGULATOR_SUPPLY("DBVDD", "5-001a"), + REGULATOR_SUPPLY("AVDD2", "5-001a"), + REGULATOR_SUPPLY("CPVDD", "5-001a"), }; static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { - { - .dev_name = "5-001a", - .supply = "SPKVDD1", - }, { - .dev_name = "5-001a", - .supply = "SPKVDD2", - }, + REGULATOR_SUPPLY("SPKVDD1", "5-001a"), + REGULATOR_SUPPLY("SPKVDD2", "5-001a"), }; static struct regulator_init_data wm8994_fixed_voltage0_init_data = { @@ -459,15 +446,11 @@ static struct platform_device wm8994_fixed_voltage1 = { }, }; -static struct regulator_consumer_supply wm8994_avdd1_supply = { - .dev_name = "5-001a", - .supply = "AVDD1", -}; +static struct regulator_consumer_supply wm8994_avdd1_supply = + REGULATOR_SUPPLY("AVDD1", "5-001a"); -static struct regulator_consumer_supply wm8994_dcvdd_supply = { - .dev_name = "5-001a", - .supply = "DCVDD", -}; +static struct regulator_consumer_supply wm8994_dcvdd_supply = + REGULATOR_SUPPLY("DCVDD", "5-001a"); static struct regulator_init_data wm8994_ldo1_data = { .constraints = { @@ -664,6 +647,7 @@ static void __init aquila_map_io(void) s5p_init_io(NULL, 0, S5P_VA_CHIPID); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs)); + s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } static void __init aquila_machine_init(void) @@ -698,5 +682,5 @@ MACHINE_START(AQUILA, "Aquila") .init_irq = s5pv210_init_irq, .map_io = aquila_map_io, .init_machine = aquila_machine_init, - .timer = &s3c24xx_timer, + .timer = &s5p_timer, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 056f5c7..2432917 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -45,6 +45,7 @@ #include <plat/keypad.h> #include <plat/sdhci.h> #include <plat/clock.h> +#include <plat/s5p-time.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -108,6 +109,8 @@ static struct s3c_fb_pd_win goni_fb_win0 = { }, .max_bpp = 32, .default_bpp = 16, + .virtual_x = 480, + .virtual_y = 2 * 800, }; static struct s3c_fb_platdata goni_lcd_pdata __initdata = { @@ -269,10 +272,30 @@ static void __init goni_tsp_init(void) /* MAX8998 regulators */ #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) +static struct regulator_consumer_supply goni_ldo3_consumers[] = { + REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), +}; + static struct regulator_consumer_supply goni_ldo5_consumers[] = { REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), }; +static struct regulator_consumer_supply goni_ldo8_consumers[] = { + REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), +}; + +static struct regulator_consumer_supply goni_ldo11_consumers[] = { + REGULATOR_SUPPLY("vddio", "0-0030"), /* "CAM_IO_2.8V" */ +}; + +static struct regulator_consumer_supply goni_ldo13_consumers[] = { + REGULATOR_SUPPLY("vdda", "0-0030"), /* "CAM_A_2.8V" */ +}; + +static struct regulator_consumer_supply goni_ldo14_consumers[] = { + REGULATOR_SUPPLY("vdd_core", "0-0030"), /* "CAM_CIF_1.8V" */ +}; + static struct regulator_init_data goni_ldo2_data = { .constraints = { .name = "VALIVE_1.1V", @@ -292,8 +315,10 @@ static struct regulator_init_data goni_ldo3_data = { .min_uV = 1100000, .max_uV = 1100000, .apply_uV = 1, - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo3_consumers), + .consumer_supplies = goni_ldo3_consumers, }; static struct regulator_init_data goni_ldo4_data = { @@ -311,6 +336,7 @@ static struct regulator_init_data goni_ldo5_data = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers), .consumer_supplies = goni_ldo5_consumers, @@ -341,8 +367,10 @@ static struct regulator_init_data goni_ldo8_data = { .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo8_consumers), + .consumer_supplies = goni_ldo8_consumers, }; static struct regulator_init_data goni_ldo9_data = { @@ -351,7 +379,6 @@ static struct regulator_init_data goni_ldo9_data = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, - .always_on = 1, }, }; @@ -371,8 +398,10 @@ static struct regulator_init_data goni_ldo11_data = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo11_consumers), + .consumer_supplies = goni_ldo11_consumers, }; static struct regulator_init_data goni_ldo12_data = { @@ -381,7 +410,6 @@ static struct regulator_init_data goni_ldo12_data = { .min_uV = 1200000, .max_uV = 1200000, .apply_uV = 1, - .always_on = 1, }, }; @@ -391,8 +419,10 @@ static struct regulator_init_data goni_ldo13_data = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo13_consumers), + .consumer_supplies = goni_ldo13_consumers, }; static struct regulator_init_data goni_ldo14_data = { @@ -401,8 +431,10 @@ static struct regulator_init_data goni_ldo14_data = { .min_uV = 1800000, .max_uV = 1800000, .apply_uV = 1, - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(goni_ldo14_consumers), + .consumer_supplies = goni_ldo14_consumers, }; static struct regulator_init_data goni_ldo15_data = { @@ -411,7 +443,6 @@ static struct regulator_init_data goni_ldo15_data = { .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, - .always_on = 1, }, }; @@ -421,7 +452,6 @@ static struct regulator_init_data goni_ldo16_data = { .min_uV = 1800000, .max_uV = 1800000, .apply_uV = 1, - .always_on = 1, }, }; @@ -436,13 +466,11 @@ static struct regulator_init_data goni_ldo17_data = { }; /* BUCK */ -static struct regulator_consumer_supply buck1_consumer[] = { - { .supply = "vddarm", }, -}; +static struct regulator_consumer_supply buck1_consumer = + REGULATOR_SUPPLY("vddarm", NULL); -static struct regulator_consumer_supply buck2_consumer[] = { - { .supply = "vddint", }, -}; +static struct regulator_consumer_supply buck2_consumer = + REGULATOR_SUPPLY("vddint", NULL); static struct regulator_init_data goni_buck1_data = { .constraints = { @@ -453,8 +481,8 @@ static struct regulator_init_data goni_buck1_data = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(buck1_consumer), - .consumer_supplies = buck1_consumer, + .num_consumer_supplies = 1, + .consumer_supplies = &buck1_consumer, }; static struct regulator_init_data goni_buck2_data = { @@ -466,8 +494,8 @@ static struct regulator_init_data goni_buck2_data = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = ARRAY_SIZE(buck2_consumer), - .consumer_supplies = buck2_consumer, + .num_consumer_supplies = 1, + .consumer_supplies = &buck2_consumer, }; static struct regulator_init_data goni_buck3_data = { @@ -531,26 +559,14 @@ static struct max8998_platform_data goni_max8998_pdata = { #endif static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { - { - .dev_name = "5-001a", - .supply = "DBVDD", - }, { - .dev_name = "5-001a", - .supply = "AVDD2", - }, { - .dev_name = "5-001a", - .supply = "CPVDD", - }, + REGULATOR_SUPPLY("DBVDD", "5-001a"), + REGULATOR_SUPPLY("AVDD2", "5-001a"), + REGULATOR_SUPPLY("CPVDD", "5-001a"), }; static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { - { - .dev_name = "5-001a", - .supply = "SPKVDD1", - }, { - .dev_name = "5-001a", - .supply = "SPKVDD2", - }, + REGULATOR_SUPPLY("SPKVDD1", "5-001a"), + REGULATOR_SUPPLY("SPKVDD2", "5-001a"), }; static struct regulator_init_data wm8994_fixed_voltage0_init_data = { @@ -599,15 +615,11 @@ static struct platform_device wm8994_fixed_voltage1 = { }, }; -static struct regulator_consumer_supply wm8994_avdd1_supply = { - .dev_name = "5-001a", - .supply = "AVDD1", -}; +static struct regulator_consumer_supply wm8994_avdd1_supply = + REGULATOR_SUPPLY("AVDD1", "5-001a"); -static struct regulator_consumer_supply wm8994_dcvdd_supply = { - .dev_name = "5-001a", - .supply = "DCVDD", -}; +static struct regulator_consumer_supply wm8994_dcvdd_supply = + REGULATOR_SUPPLY("DCVDD", "5-001a"); static struct regulator_init_data wm8994_ldo1_data = { .constraints = { @@ -794,6 +806,7 @@ static struct platform_device *goni_devices[] __initdata = { &goni_i2c_gpio5, &mmc2_fixed_voltage, &goni_device_gpiokeys, + &s3c_device_i2c0, &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, @@ -823,6 +836,7 @@ static void __init goni_map_io(void) s5p_init_io(NULL, 0, S5P_VA_CHIPID); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs)); + s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } static void __init goni_machine_init(void) @@ -830,6 +844,9 @@ static void __init goni_machine_init(void) /* Radio: call before I2C 1 registeration */ goni_radio_init(); + /* I2C0 */ + s3c_i2c0_set_platdata(NULL); + /* I2C1 */ s3c_i2c1_set_platdata(NULL); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); @@ -873,5 +890,5 @@ MACHINE_START(GONI, "GONI") .init_irq = s5pv210_init_irq, .map_io = goni_map_io, .init_machine = goni_machine_init, - .timer = &s3c24xx_timer, + .timer = &s5p_timer, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index ce11a02..6c412c8 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -30,6 +30,7 @@ #include <plat/ata.h> #include <plat/iic.h> #include <plat/pm.h> +#include <plat/s5p-time.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -111,6 +112,7 @@ static void __init smdkc110_map_io(void) s5p_init_io(NULL, 0, S5P_VA_CHIPID); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); + s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } static void __init smdkc110_machine_init(void) @@ -138,5 +140,5 @@ MACHINE_START(SMDKC110, "SMDKC110") .init_irq = s5pv210_init_irq, .map_io = smdkc110_map_io, .init_machine = smdkc110_machine_init, - .timer = &s3c24xx_timer, + .timer = &s5p_timer, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index bc9fdb5..bc08ac4 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -18,6 +18,7 @@ #include <linux/fb.h> #include <linux/gpio.h> #include <linux/delay.h> +#include <linux/pwm_backlight.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -43,6 +44,8 @@ #include <plat/keypad.h> #include <plat/pm.h> #include <plat/fb.h> +#include <plat/gpio-cfg.h> +#include <plat/s5p-time.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -208,6 +211,45 @@ static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = { .setup_gpio = s5pv210_fb_gpio_setup_24bpp, }; +static int smdkv210_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(S5PV210_GPD0(3), "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPD for PWM-OUT 3\n"); + return ret; + } + + /* Configure GPIO pin with S5PV210_GPD_0_3_TOUT_3 */ + s3c_gpio_cfgpin(S5PV210_GPD0(3), S3C_GPIO_SFN(2)); + + return 0; +} + +static void smdkv210_backlight_exit(struct device *dev) +{ + s3c_gpio_cfgpin(S5PV210_GPD0(3), S3C_GPIO_OUTPUT); + gpio_free(S5PV210_GPD0(3)); +} + +static struct platform_pwm_backlight_data smdkv210_backlight_data = { + .pwm_id = 3, + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = smdkv210_backlight_init, + .exit = smdkv210_backlight_exit, +}; + +static struct platform_device smdkv210_backlight_device = { + .name = "pwm-backlight", + .dev = { + .parent = &s3c_device_timer[3].dev, + .platform_data = &smdkv210_backlight_data, + }, +}; + static struct platform_device *smdkv210_devices[] __initdata = { &s3c_device_adc, &s3c_device_cfcon, @@ -229,6 +271,8 @@ static struct platform_device *smdkv210_devices[] __initdata = { &samsung_device_keypad, &smdkv210_dm9000, &smdkv210_lcd_lte480wv, + &s3c_device_timer[3], + &smdkv210_backlight_device, }; static void __init smdkv210_dm9000_init(void) @@ -272,6 +316,7 @@ static void __init smdkv210_map_io(void) s5p_init_io(NULL, 0, S5P_VA_CHIPID); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs)); + s5p_set_timer_source(S5P_PWM2, S5P_PWM4); } static void __init smdkv210_machine_init(void) @@ -306,5 +351,5 @@ MACHINE_START(SMDKV210, "SMDKV210") .init_irq = s5pv210_init_irq, .map_io = smdkv210_map_io, .init_machine = smdkv210_machine_init, - .timer = &s3c24xx_timer, + .timer = &s5p_timer, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c index 043c938..925fc0d 100644 --- a/arch/arm/mach-s5pv210/mach-torbreck.c +++ b/arch/arm/mach-s5pv210/mach-torbreck.c @@ -27,6 +27,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/iic.h> +#include <plat/s5p-time.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define TORBRECK_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -104,6 +105,7 @@ static void __init torbreck_map_io(void) s5p_init_io(NULL, 0, S5P_VA_CHIPID); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs)); + s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } static void __init torbreck_machine_init(void) @@ -127,5 +129,5 @@ MACHINE_START(TORBRECK, "TORBRECK") .init_irq = s5pv210_init_irq, .map_io = torbreck_map_io, .init_machine = torbreck_machine_init, - .timer = &s3c24xx_timer, + .timer = &s5p_timer, MACHINE_END diff --git a/arch/arm/mach-s5pv210/setup-fimc.c b/arch/arm/mach-s5pv210/setup-fimc.c new file mode 100644 index 0000000..54cc5b11 --- /dev/null +++ b/arch/arm/mach-s5pv210/setup-fimc.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * + * S5PV210 camera interface GPIO configuration. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <plat/gpio-cfg.h> +#include <plat/camport.h> + +int s5pv210_fimc_setup_gpio(enum s5p_camport_id id) +{ + u32 gpio8, gpio5; + int ret; + + switch (id) { + case S5P_CAMPORT_A: + gpio8 = S5PV210_GPE0(0); + gpio5 = S5PV210_GPE1(0); + break; + + case S5P_CAMPORT_B: + gpio8 = S5PV210_GPJ0(0); + gpio5 = S5PV210_GPJ1(0); + break; + + default: + WARN(1, "Wrong camport id: %d\n", id); + return -EINVAL; + } + + ret = s3c_gpio_cfgall_range(gpio8, 8, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_UP); + if (ret) + return ret; + + return s3c_gpio_cfgall_range(gpio5, 5, S3C_GPIO_SFN(2), + S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig deleted file mode 100644 index b2a9acc..0000000 --- a/arch/arm/mach-s5pv310/Kconfig +++ /dev/null @@ -1,151 +0,0 @@ -# arch/arm/mach-s5pv310/Kconfig -# -# Copyright (c) 2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -# Configuration options for the S5PV310 - -if ARCH_S5PV310 - -config CPU_S5PV310 - bool - select S3C_PL330_DMA - help - Enable S5PV310 CPU support - -config S5PV310_DEV_PD - bool - help - Compile in platform device definitions for Power Domain - -config S5PV310_SETUP_I2C1 - bool - help - Common setup code for i2c bus 1. - -config S5PV310_SETUP_I2C2 - bool - help - Common setup code for i2c bus 2. - -config S5PV310_SETUP_I2C3 - bool - help - Common setup code for i2c bus 3. - -config S5PV310_SETUP_I2C4 - bool - help - Common setup code for i2c bus 4. - -config S5PV310_SETUP_I2C5 - bool - help - Common setup code for i2c bus 5. - -config S5PV310_SETUP_I2C6 - bool - help - Common setup code for i2c bus 6. - -config S5PV310_SETUP_I2C7 - bool - help - Common setup code for i2c bus 7. - -config S5PV310_SETUP_SDHCI - bool - select S5PV310_SETUP_SDHCI_GPIO - help - Internal helper functions for S5PV310 based SDHCI systems. - -config S5PV310_SETUP_SDHCI_GPIO - bool - help - Common setup code for SDHCI gpio. - -config S5PV310_DEV_SYSMMU - bool - help - Common setup code for SYSTEM MMU in S5PV310 - -# machine support - -menu "S5PC210 Machines" - -config MACH_SMDKC210 - bool "SMDKC210" - select CPU_S5PV310 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S3C_DEV_I2C1 - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S5PV310_DEV_PD - select S5PV310_SETUP_I2C1 - select S5PV310_SETUP_SDHCI - select S5PV310_DEV_SYSMMU - help - Machine support for Samsung SMDKC210 - S5PC210(MCP) is one of package option of S5PV310 - -config MACH_UNIVERSAL_C210 - bool "Mobile UNIVERSAL_C210 Board" - select CPU_S5PV310 - select S5P_DEV_ONENAND - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S5PV310_SETUP_SDHCI - select S3C_DEV_I2C1 - select S5PV310_SETUP_I2C1 - help - Machine support for Samsung Mobile Universal S5PC210 Reference - Board. S5PC210(MCP) is one of package option of S5PV310 - -endmenu - -menu "S5PV310 Machines" - -config MACH_SMDKV310 - bool "SMDKV310" - select CPU_S5PV310 - select S3C_DEV_RTC - select S3C_DEV_WDT - select S3C_DEV_I2C1 - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S5PV310_DEV_PD - select S5PV310_DEV_SYSMMU - select S5PV310_SETUP_I2C1 - select S5PV310_SETUP_SDHCI - help - Machine support for Samsung SMDKV310 - -endmenu - -comment "Configuration for HSMMC bus width" - -menu "Use 8-bit bus width" - -config S5PV310_SDHCI_CH0_8BIT - bool "Channel 0 with 8-bit bus" - help - Support HSMMC Channel 0 8-bit bus. - If selected, Channel 1 is disabled. - -config S5PV310_SDHCI_CH2_8BIT - bool "Channel 2 with 8-bit bus" - help - Support HSMMC Channel 2 8-bit bus. - If selected, Channel 3 is disabled. - -endmenu - -endif diff --git a/arch/arm/mach-s5pv310/Makefile b/arch/arm/mach-s5pv310/Makefile deleted file mode 100644 index 036fb38..0000000 --- a/arch/arm/mach-s5pv310/Makefile +++ /dev/null @@ -1,43 +0,0 @@ -# arch/arm/mach-s5pv310/Makefile -# -# Copyright (c) 2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core support for S5PV310 system - -obj-$(CONFIG_CPU_S5PV310) += cpu.o init.o clock.o irq-combiner.o -obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o gpiolib.o irq-eint.o dma.o -obj-$(CONFIG_CPU_FREQ) += cpufreq.o - -obj-$(CONFIG_SMP) += platsmp.o headsmp.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o - -# machine support - -obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o -obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o -obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o - -# device support - -obj-y += dev-audio.o -obj-$(CONFIG_S5PV310_DEV_PD) += dev-pd.o -obj-$(CONFIG_S5PV310_DEV_SYSMMU) += dev-sysmmu.o - -obj-$(CONFIG_S5PV310_SETUP_I2C1) += setup-i2c1.o -obj-$(CONFIG_S5PV310_SETUP_I2C2) += setup-i2c2.o -obj-$(CONFIG_S5PV310_SETUP_I2C3) += setup-i2c3.o -obj-$(CONFIG_S5PV310_SETUP_I2C4) += setup-i2c4.o -obj-$(CONFIG_S5PV310_SETUP_I2C5) += setup-i2c5.o -obj-$(CONFIG_S5PV310_SETUP_I2C6) += setup-i2c6.o -obj-$(CONFIG_S5PV310_SETUP_I2C7) += setup-i2c7.o -obj-$(CONFIG_S5PV310_SETUP_SDHCI) += setup-sdhci.o -obj-$(CONFIG_S5PV310_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o diff --git a/arch/arm/mach-s5pv310/gpiolib.c b/arch/arm/mach-s5pv310/gpiolib.c deleted file mode 100644 index 55217b8..0000000 --- a/arch/arm/mach-s5pv310/gpiolib.c +++ /dev/null @@ -1,304 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/gpiolib.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -/* - * Following are the gpio banks in v310. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip s5pv310_gpio_part1_4bit[] = { - { - .chip = { - .base = S5PV310_GPA0(0), - .ngpio = S5PV310_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = S5PV310_GPA1(0), - .ngpio = S5PV310_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = S5PV310_GPB(0), - .ngpio = S5PV310_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = S5PV310_GPC0(0), - .ngpio = S5PV310_GPIO_C0_NR, - .label = "GPC0", - }, - }, { - .chip = { - .base = S5PV310_GPC1(0), - .ngpio = S5PV310_GPIO_C1_NR, - .label = "GPC1", - }, - }, { - .chip = { - .base = S5PV310_GPD0(0), - .ngpio = S5PV310_GPIO_D0_NR, - .label = "GPD0", - }, - }, { - .chip = { - .base = S5PV310_GPD1(0), - .ngpio = S5PV310_GPIO_D1_NR, - .label = "GPD1", - }, - }, { - .chip = { - .base = S5PV310_GPE0(0), - .ngpio = S5PV310_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = S5PV310_GPE1(0), - .ngpio = S5PV310_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = S5PV310_GPE2(0), - .ngpio = S5PV310_GPIO_E2_NR, - .label = "GPE2", - }, - }, { - .chip = { - .base = S5PV310_GPE3(0), - .ngpio = S5PV310_GPIO_E3_NR, - .label = "GPE3", - }, - }, { - .chip = { - .base = S5PV310_GPE4(0), - .ngpio = S5PV310_GPIO_E4_NR, - .label = "GPE4", - }, - }, { - .chip = { - .base = S5PV310_GPF0(0), - .ngpio = S5PV310_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = S5PV310_GPF1(0), - .ngpio = S5PV310_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = S5PV310_GPF2(0), - .ngpio = S5PV310_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = S5PV310_GPF3(0), - .ngpio = S5PV310_GPIO_F3_NR, - .label = "GPF3", - }, - }, -}; - -static struct s3c_gpio_chip s5pv310_gpio_part2_4bit[] = { - { - .chip = { - .base = S5PV310_GPJ0(0), - .ngpio = S5PV310_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = S5PV310_GPJ1(0), - .ngpio = S5PV310_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = S5PV310_GPK0(0), - .ngpio = S5PV310_GPIO_K0_NR, - .label = "GPK0", - }, - }, { - .chip = { - .base = S5PV310_GPK1(0), - .ngpio = S5PV310_GPIO_K1_NR, - .label = "GPK1", - }, - }, { - .chip = { - .base = S5PV310_GPK2(0), - .ngpio = S5PV310_GPIO_K2_NR, - .label = "GPK2", - }, - }, { - .chip = { - .base = S5PV310_GPK3(0), - .ngpio = S5PV310_GPIO_K3_NR, - .label = "GPK3", - }, - }, { - .chip = { - .base = S5PV310_GPL0(0), - .ngpio = S5PV310_GPIO_L0_NR, - .label = "GPL0", - }, - }, { - .chip = { - .base = S5PV310_GPL1(0), - .ngpio = S5PV310_GPIO_L1_NR, - .label = "GPL1", - }, - }, { - .chip = { - .base = S5PV310_GPL2(0), - .ngpio = S5PV310_GPIO_L2_NR, - .label = "GPL2", - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC00), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = S5PV310_GPX0(0), - .ngpio = S5PV310_GPIO_X0_NR, - .label = "GPX0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC20), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = S5PV310_GPX1(0), - .ngpio = S5PV310_GPIO_X1_NR, - .label = "GPX1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC40), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = S5PV310_GPX2(0), - .ngpio = S5PV310_GPIO_X2_NR, - .label = "GPX2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC60), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = S5PV310_GPX3(0), - .ngpio = S5PV310_GPIO_X3_NR, - .label = "GPX3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static struct s3c_gpio_chip s5pv310_gpio_part3_4bit[] = { - { - .chip = { - .base = S5PV310_GPZ(0), - .ngpio = S5PV310_GPIO_Z_NR, - .label = "GPZ", - }, - }, -}; - -static __init int s5pv310_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip; - int i; - int nr_chips; - - /* GPIO part 1 */ - - chip = s5pv310_gpio_part1_4bit; - nr_chips = ARRAY_SIZE(s5pv310_gpio_part1_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) - chip->config = &gpio_cfg; - if (chip->base == NULL) - chip->base = S5P_VA_GPIO1 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part1_4bit, nr_chips); - - /* GPIO part 2 */ - - chip = s5pv310_gpio_part2_4bit; - nr_chips = ARRAY_SIZE(s5pv310_gpio_part2_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) - chip->config = &gpio_cfg; - if (chip->base == NULL) - chip->base = S5P_VA_GPIO2 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part2_4bit, nr_chips); - - /* GPIO part 3 */ - - chip = s5pv310_gpio_part3_4bit; - nr_chips = ARRAY_SIZE(s5pv310_gpio_part3_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) - chip->config = &gpio_cfg; - if (chip->base == NULL) - chip->base = S5P_VA_GPIO3 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part3_4bit, nr_chips); - - return 0; -} -core_initcall(s5pv310_gpiolib_init); diff --git a/arch/arm/mach-s5pv310/include/mach/gpio.h b/arch/arm/mach-s5pv310/include/mach/gpio.h deleted file mode 100644 index 20cb80c..0000000 --- a/arch/arm/mach-s5pv310/include/mach/gpio.h +++ /dev/null @@ -1,135 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/gpio.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV310 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* Practically, GPIO banks upto GPZ are the configurable gpio banks */ - -/* GPIO bank sizes */ -#define S5PV310_GPIO_A0_NR (8) -#define S5PV310_GPIO_A1_NR (6) -#define S5PV310_GPIO_B_NR (8) -#define S5PV310_GPIO_C0_NR (5) -#define S5PV310_GPIO_C1_NR (5) -#define S5PV310_GPIO_D0_NR (4) -#define S5PV310_GPIO_D1_NR (4) -#define S5PV310_GPIO_E0_NR (5) -#define S5PV310_GPIO_E1_NR (8) -#define S5PV310_GPIO_E2_NR (6) -#define S5PV310_GPIO_E3_NR (8) -#define S5PV310_GPIO_E4_NR (8) -#define S5PV310_GPIO_F0_NR (8) -#define S5PV310_GPIO_F1_NR (8) -#define S5PV310_GPIO_F2_NR (8) -#define S5PV310_GPIO_F3_NR (6) -#define S5PV310_GPIO_J0_NR (8) -#define S5PV310_GPIO_J1_NR (5) -#define S5PV310_GPIO_K0_NR (7) -#define S5PV310_GPIO_K1_NR (7) -#define S5PV310_GPIO_K2_NR (7) -#define S5PV310_GPIO_K3_NR (7) -#define S5PV310_GPIO_L0_NR (8) -#define S5PV310_GPIO_L1_NR (3) -#define S5PV310_GPIO_L2_NR (8) -#define S5PV310_GPIO_X0_NR (8) -#define S5PV310_GPIO_X1_NR (8) -#define S5PV310_GPIO_X2_NR (8) -#define S5PV310_GPIO_X3_NR (8) -#define S5PV310_GPIO_Z_NR (7) - -/* GPIO bank numbers */ - -#define S5PV310_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p_gpio_number { - S5PV310_GPIO_A0_START = 0, - S5PV310_GPIO_A1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_A0), - S5PV310_GPIO_B_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_A1), - S5PV310_GPIO_C0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_B), - S5PV310_GPIO_C1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_C0), - S5PV310_GPIO_D0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_C1), - S5PV310_GPIO_D1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_D0), - S5PV310_GPIO_E0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_D1), - S5PV310_GPIO_E1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E0), - S5PV310_GPIO_E2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E1), - S5PV310_GPIO_E3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E2), - S5PV310_GPIO_E4_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E3), - S5PV310_GPIO_F0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_E4), - S5PV310_GPIO_F1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F0), - S5PV310_GPIO_F2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F1), - S5PV310_GPIO_F3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F2), - S5PV310_GPIO_J0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_F3), - S5PV310_GPIO_J1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_J0), - S5PV310_GPIO_K0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_J1), - S5PV310_GPIO_K1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K0), - S5PV310_GPIO_K2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K1), - S5PV310_GPIO_K3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K2), - S5PV310_GPIO_L0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_K3), - S5PV310_GPIO_L1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L0), - S5PV310_GPIO_L2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L1), - S5PV310_GPIO_X0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_L2), - S5PV310_GPIO_X1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X0), - S5PV310_GPIO_X2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X1), - S5PV310_GPIO_X3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X2), - S5PV310_GPIO_Z_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X3), -}; - -/* S5PV310 GPIO number definitions */ -#define S5PV310_GPA0(_nr) (S5PV310_GPIO_A0_START + (_nr)) -#define S5PV310_GPA1(_nr) (S5PV310_GPIO_A1_START + (_nr)) -#define S5PV310_GPB(_nr) (S5PV310_GPIO_B_START + (_nr)) -#define S5PV310_GPC0(_nr) (S5PV310_GPIO_C0_START + (_nr)) -#define S5PV310_GPC1(_nr) (S5PV310_GPIO_C1_START + (_nr)) -#define S5PV310_GPD0(_nr) (S5PV310_GPIO_D0_START + (_nr)) -#define S5PV310_GPD1(_nr) (S5PV310_GPIO_D1_START + (_nr)) -#define S5PV310_GPE0(_nr) (S5PV310_GPIO_E0_START + (_nr)) -#define S5PV310_GPE1(_nr) (S5PV310_GPIO_E1_START + (_nr)) -#define S5PV310_GPE2(_nr) (S5PV310_GPIO_E2_START + (_nr)) -#define S5PV310_GPE3(_nr) (S5PV310_GPIO_E3_START + (_nr)) -#define S5PV310_GPE4(_nr) (S5PV310_GPIO_E4_START + (_nr)) -#define S5PV310_GPF0(_nr) (S5PV310_GPIO_F0_START + (_nr)) -#define S5PV310_GPF1(_nr) (S5PV310_GPIO_F1_START + (_nr)) -#define S5PV310_GPF2(_nr) (S5PV310_GPIO_F2_START + (_nr)) -#define S5PV310_GPF3(_nr) (S5PV310_GPIO_F3_START + (_nr)) -#define S5PV310_GPJ0(_nr) (S5PV310_GPIO_J0_START + (_nr)) -#define S5PV310_GPJ1(_nr) (S5PV310_GPIO_J1_START + (_nr)) -#define S5PV310_GPK0(_nr) (S5PV310_GPIO_K0_START + (_nr)) -#define S5PV310_GPK1(_nr) (S5PV310_GPIO_K1_START + (_nr)) -#define S5PV310_GPK2(_nr) (S5PV310_GPIO_K2_START + (_nr)) -#define S5PV310_GPK3(_nr) (S5PV310_GPIO_K3_START + (_nr)) -#define S5PV310_GPL0(_nr) (S5PV310_GPIO_L0_START + (_nr)) -#define S5PV310_GPL1(_nr) (S5PV310_GPIO_L1_START + (_nr)) -#define S5PV310_GPL2(_nr) (S5PV310_GPIO_L2_START + (_nr)) -#define S5PV310_GPX0(_nr) (S5PV310_GPIO_X0_START + (_nr)) -#define S5PV310_GPX1(_nr) (S5PV310_GPIO_X1_START + (_nr)) -#define S5PV310_GPX2(_nr) (S5PV310_GPIO_X2_START + (_nr)) -#define S5PV310_GPX3(_nr) (S5PV310_GPIO_X3_START + (_nr)) -#define S5PV310_GPZ(_nr) (S5PV310_GPIO_Z_START + (_nr)) - -/* the end of the S5PV310 specific gpios */ -#define S5PV310_GPIO_END (S5PV310_GPZ(S5PV310_GPIO_Z_NR) + 1) -#define S3C_GPIO_END S5PV310_GPIO_END - -/* define the number of gpios we need to the one after the GPZ() range */ -#define ARCH_NR_GPIOS (S5PV310_GPZ(S5PV310_GPIO_Z_NR) + \ - CONFIG_SAMSUNG_GPIO_EXTRA + 1) - -#include <asm-generic/gpio.h> - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h deleted file mode 100644 index 901657f..0000000 --- a/arch/arm/mach-s5pv310/include/mach/map.h +++ /dev/null @@ -1,144 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/map.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV310 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include <plat/map-base.h> - -/* - * S5PV310 UART offset is 0x10000 but the older S5P SoCs are 0x400. - * So need to define it, and here is to avoid redefinition warning. - */ -#define S3C_UART_OFFSET (0x10000) - -#include <plat/map-s5p.h> - -#define S5PV310_PA_SYSRAM 0x02025000 - -#define S5PV310_PA_I2S0 0x03830000 -#define S5PV310_PA_I2S1 0xE3100000 -#define S5PV310_PA_I2S2 0xE2A00000 - -#define S5PV310_PA_PCM0 0x03840000 -#define S5PV310_PA_PCM1 0x13980000 -#define S5PV310_PA_PCM2 0x13990000 - -#define S5PV310_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000)) - -#define S5PC210_PA_ONENAND 0x0C000000 -#define S5PC210_PA_ONENAND_DMA 0x0C600000 - -#define S5PV310_PA_CHIPID 0x10000000 - -#define S5PV310_PA_SYSCON 0x10010000 -#define S5PV310_PA_PMU 0x10020000 -#define S5PV310_PA_CMU 0x10030000 - -#define S5PV310_PA_WATCHDOG 0x10060000 -#define S5PV310_PA_RTC 0x10070000 - -#define S5PV310_PA_DMC0 0x10400000 - -#define S5PV310_PA_COMBINER 0x10448000 - -#define S5PV310_PA_COREPERI 0x10500000 -#define S5PV310_PA_GIC_CPU 0x10500100 -#define S5PV310_PA_TWD 0x10500600 -#define S5PV310_PA_GIC_DIST 0x10501000 -#define S5PV310_PA_L2CC 0x10502000 - -#define S5PV310_PA_MDMA 0x10810000 -#define S5PV310_PA_PDMA0 0x12680000 -#define S5PV310_PA_PDMA1 0x12690000 - -#define S5PV310_PA_SYSMMU_MDMA 0x10A40000 -#define S5PV310_PA_SYSMMU_SSS 0x10A50000 -#define S5PV310_PA_SYSMMU_FIMC0 0x11A20000 -#define S5PV310_PA_SYSMMU_FIMC1 0x11A30000 -#define S5PV310_PA_SYSMMU_FIMC2 0x11A40000 -#define S5PV310_PA_SYSMMU_FIMC3 0x11A50000 -#define S5PV310_PA_SYSMMU_JPEG 0x11A60000 -#define S5PV310_PA_SYSMMU_FIMD0 0x11E20000 -#define S5PV310_PA_SYSMMU_FIMD1 0x12220000 -#define S5PV310_PA_SYSMMU_PCIe 0x12620000 -#define S5PV310_PA_SYSMMU_G2D 0x12A20000 -#define S5PV310_PA_SYSMMU_ROTATOR 0x12A30000 -#define S5PV310_PA_SYSMMU_MDMA2 0x12A40000 -#define S5PV310_PA_SYSMMU_TV 0x12E20000 -#define S5PV310_PA_SYSMMU_MFC_L 0x13620000 -#define S5PV310_PA_SYSMMU_MFC_R 0x13630000 - -#define S5PV310_PA_GPIO1 0x11400000 -#define S5PV310_PA_GPIO2 0x11000000 -#define S5PV310_PA_GPIO3 0x03860000 - -#define S5PV310_PA_MIPI_CSIS0 0x11880000 -#define S5PV310_PA_MIPI_CSIS1 0x11890000 - -#define S5PV310_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) - -#define S5PV310_PA_SROMC 0x12570000 - -#define S5PV310_PA_UART 0x13800000 - -#define S5PV310_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) - -#define S5PV310_PA_AC97 0x139A0000 - -#define S5PV310_PA_TIMER 0x139D0000 - -#define S5PV310_PA_SDRAM 0x40000000 - -#define S5PV310_PA_SPDIF 0xE1100000 - -/* Compatibiltiy Defines */ - -#define S3C_PA_HSMMC0 S5PV310_PA_HSMMC(0) -#define S3C_PA_HSMMC1 S5PV310_PA_HSMMC(1) -#define S3C_PA_HSMMC2 S5PV310_PA_HSMMC(2) -#define S3C_PA_HSMMC3 S5PV310_PA_HSMMC(3) -#define S3C_PA_IIC S5PV310_PA_IIC(0) -#define S3C_PA_IIC1 S5PV310_PA_IIC(1) -#define S3C_PA_IIC2 S5PV310_PA_IIC(2) -#define S3C_PA_IIC3 S5PV310_PA_IIC(3) -#define S3C_PA_IIC4 S5PV310_PA_IIC(4) -#define S3C_PA_IIC5 S5PV310_PA_IIC(5) -#define S3C_PA_IIC6 S5PV310_PA_IIC(6) -#define S3C_PA_IIC7 S5PV310_PA_IIC(7) -#define S3C_PA_RTC S5PV310_PA_RTC -#define S3C_PA_WDT S5PV310_PA_WATCHDOG - -#define S5P_PA_CHIPID S5PV310_PA_CHIPID -#define S5P_PA_MIPI_CSIS0 S5PV310_PA_MIPI_CSIS0 -#define S5P_PA_MIPI_CSIS1 S5PV310_PA_MIPI_CSIS1 -#define S5P_PA_ONENAND S5PC210_PA_ONENAND -#define S5P_PA_ONENAND_DMA S5PC210_PA_ONENAND_DMA -#define S5P_PA_SDRAM S5PV310_PA_SDRAM -#define S5P_PA_SROMC S5PV310_PA_SROMC -#define S5P_PA_SYSCON S5PV310_PA_SYSCON -#define S5P_PA_TIMER S5PV310_PA_TIMER - -/* UART */ - -#define S3C_PA_UART S5PV310_PA_UART - -#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_PA_UART0 S5P_PA_UART(0) -#define S5P_PA_UART1 S5P_PA_UART(1) -#define S5P_PA_UART2 S5P_PA_UART(2) -#define S5P_PA_UART3 S5P_PA_UART(3) -#define S5P_PA_UART4 S5P_PA_UART(4) - -#define S5P_SZ_UART SZ_256 - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-gpio.h b/arch/arm/mach-s5pv310/include/mach/regs-gpio.h deleted file mode 100644 index 82e9e0c..0000000 --- a/arch/arm/mach-s5pv310/include/mach/regs-gpio.h +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-gpio.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 - GPIO (including EINT) register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_GPIO_H -#define __ASM_ARCH_REGS_GPIO_H __FILE__ - -#include <mach/map.h> -#include <mach/irqs.h> - -#define S5PV310_EINT40CON (S5P_VA_GPIO2 + 0xE00) -#define S5P_EINT_CON(x) (S5PV310_EINT40CON + ((x) * 0x4)) - -#define S5PV310_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80) -#define S5P_EINT_FLTCON(x) (S5PV310_EINT40FLTCON0 + ((x) * 0x4)) - -#define S5PV310_EINT40MASK (S5P_VA_GPIO2 + 0xF00) -#define S5P_EINT_MASK(x) (S5PV310_EINT40MASK + ((x) * 0x4)) - -#define S5PV310_EINT40PEND (S5P_VA_GPIO2 + 0xF40) -#define S5P_EINT_PEND(x) (S5PV310_EINT40PEND + ((x) * 0x4)) - -#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) - -#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) - -#define EINT_MODE S3C_GPIO_SFN(0xf) - -#define EINT_GPIO_0(x) S5PV310_GPX0(x) -#define EINT_GPIO_1(x) S5PV310_GPX1(x) -#define EINT_GPIO_2(x) S5PV310_GPX2(x) -#define EINT_GPIO_3(x) S5PV310_GPX3(x) - -#endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/regs-pmu.h b/arch/arm/mach-s5pv310/include/mach/regs-pmu.h deleted file mode 100644 index fb333d0..0000000 --- a/arch/arm/mach-s5pv310/include/mach/regs-pmu.h +++ /dev/null @@ -1,30 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/regs-pmu.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5PV310 - Power management unit definition - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_PMU_H -#define __ASM_ARCH_REGS_PMU_H __FILE__ - -#include <mach/map.h> - -#define S5P_PMUREG(x) (S5P_VA_PMU + (x)) - -#define S5P_PMU_CAM_CONF S5P_PMUREG(0x3C00) -#define S5P_PMU_TV_CONF S5P_PMUREG(0x3C20) -#define S5P_PMU_MFC_CONF S5P_PMUREG(0x3C40) -#define S5P_PMU_G3D_CONF S5P_PMUREG(0x3C60) -#define S5P_PMU_LCD0_CONF S5P_PMUREG(0x3C80) -#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0) -#define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0) - -#define S5P_INT_LOCAL_PWR_EN 0x7 - -#endif /* __ASM_ARCH_REGS_PMU_H */ diff --git a/arch/arm/mach-s5pv310/include/mach/sysmmu.h b/arch/arm/mach-s5pv310/include/mach/sysmmu.h deleted file mode 100644 index 598fc5c..0000000 --- a/arch/arm/mach-s5pv310/include/mach/sysmmu.h +++ /dev/null @@ -1,122 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/include/mach/sysmmu.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Samsung sysmmu driver for S5PV310 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARM_ARCH_SYSMMU_H -#define __ASM_ARM_ARCH_SYSMMU_H __FILE__ - -#define S5PV310_SYSMMU_TOTAL_IPNUM 16 -#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM - -enum s5pv310_sysmmu_ips { - SYSMMU_MDMA, - SYSMMU_SSS, - SYSMMU_FIMC0, - SYSMMU_FIMC1, - SYSMMU_FIMC2, - SYSMMU_FIMC3, - SYSMMU_JPEG, - SYSMMU_FIMD0, - SYSMMU_FIMD1, - SYSMMU_PCIe, - SYSMMU_G2D, - SYSMMU_ROTATOR, - SYSMMU_MDMA2, - SYSMMU_TV, - SYSMMU_MFC_L, - SYSMMU_MFC_R, -}; - -static char *sysmmu_ips_name[S5PV310_SYSMMU_TOTAL_IPNUM] = { - "SYSMMU_MDMA" , - "SYSMMU_SSS" , - "SYSMMU_FIMC0" , - "SYSMMU_FIMC1" , - "SYSMMU_FIMC2" , - "SYSMMU_FIMC3" , - "SYSMMU_JPEG" , - "SYSMMU_FIMD0" , - "SYSMMU_FIMD1" , - "SYSMMU_PCIe" , - "SYSMMU_G2D" , - "SYSMMU_ROTATOR", - "SYSMMU_MDMA2" , - "SYSMMU_TV" , - "SYSMMU_MFC_L" , - "SYSMMU_MFC_R" , -}; - -typedef enum s5pv310_sysmmu_ips sysmmu_ips; - -struct sysmmu_tt_info { - unsigned long *pgd; - unsigned long pgd_paddr; - unsigned long *pte; -}; - -struct sysmmu_controller { - const char *name; - - /* channels registers */ - void __iomem *regs; - - /* channel irq */ - unsigned int irq; - - sysmmu_ips ips; - - /* Translation Table Info. */ - struct sysmmu_tt_info *tt_info; - - struct resource *mem; - struct device *dev; - - /* SysMMU controller enable - true : enable */ - bool enable; -}; - -/** - * s5p_sysmmu_enable() - enable system mmu of ip - * @ips: The ip connected system mmu. - * - * This function enable system mmu to transfer address - * from virtual address to physical address - */ -int s5p_sysmmu_enable(sysmmu_ips ips); - -/** - * s5p_sysmmu_disable() - disable sysmmu mmu of ip - * @ips: The ip connected system mmu. - * - * This function disable system mmu to transfer address - * from virtual address to physical address - */ -int s5p_sysmmu_disable(sysmmu_ips ips); - -/** - * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table - * @ips: The ip connected system mmu. - * @pgd: The page table base address. - * - * This function set page table base address - * When system mmu transfer address from virtaul address to physical address, - * system mmu refer address information from page table - */ -int s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd); - -/** - * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu - * @ips: The ip connected system mmu. - * - * This function flush all TLB entry in system mmu - */ -int s5p_sysmmu_tlb_invalidate(sysmmu_ips ips); -#endif /* __ASM_ARM_ARCH_SYSMMU_H */ diff --git a/arch/arm/mach-s5pv310/mach-universal_c210.c b/arch/arm/mach-s5pv310/mach-universal_c210.c deleted file mode 100644 index 36bc3cf..0000000 --- a/arch/arm/mach-s5pv310/mach-universal_c210.c +++ /dev/null @@ -1,237 +0,0 @@ -/* linux/arch/arm/mach-s5pv310/mach-universal_c210.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/gpio_keys.h> -#include <linux/gpio.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/mmc/host.h> - -#include <asm/mach/arch.h> -#include <asm/mach-types.h> - -#include <plat/regs-serial.h> -#include <plat/s5pv310.h> -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/sdhci.h> - -#include <mach/map.h> - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG256 | \ - S5PV210_UFCON_RXTRIG256) - -static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, - [3] = { - .hwport = 3, - .ucon = UNIVERSAL_UCON_DEFAULT, - .ulcon = UNIVERSAL_ULCON_DEFAULT, - .ufcon = UNIVERSAL_UFCON_DEFAULT, - }, -}; - -static struct gpio_keys_button universal_gpio_keys_tables[] = { - { - .code = KEY_VOLUMEUP, - .gpio = S5PV310_GPX2(0), /* XEINT16 */ - .desc = "gpio-keys: KEY_VOLUMEUP", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_VOLUMEDOWN, - .gpio = S5PV310_GPX2(1), /* XEINT17 */ - .desc = "gpio-keys: KEY_VOLUMEDOWN", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_CONFIG, - .gpio = S5PV310_GPX2(2), /* XEINT18 */ - .desc = "gpio-keys: KEY_CONFIG", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_CAMERA, - .gpio = S5PV310_GPX2(3), /* XEINT19 */ - .desc = "gpio-keys: KEY_CAMERA", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, { - .code = KEY_OK, - .gpio = S5PV310_GPX3(5), /* XEINT29 */ - .desc = "gpio-keys: KEY_OK", - .type = EV_KEY, - .active_low = 1, - .debounce_interval = 1, - }, -}; - -static struct gpio_keys_platform_data universal_gpio_keys_data = { - .buttons = universal_gpio_keys_tables, - .nbuttons = ARRAY_SIZE(universal_gpio_keys_tables), -}; - -static struct platform_device universal_gpio_keys = { - .name = "gpio-keys", - .dev = { - .platform_data = &universal_gpio_keys_data, - }, -}; - -/* eMMC */ -static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { - .max_width = 8, - .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE), - .cd_type = S3C_SDHCI_CD_PERMANENT, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -}; - -static struct regulator_consumer_supply mmc0_supplies[] = { - REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), -}; - -static struct regulator_init_data mmc0_fixed_voltage_init_data = { - .constraints = { - .name = "VMEM_VDD_2.8V", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(mmc0_supplies), - .consumer_supplies = mmc0_supplies, -}; - -static struct fixed_voltage_config mmc0_fixed_voltage_config = { - .supply_name = "MASSMEMORY_EN", - .microvolts = 2800000, - .gpio = S5PV310_GPE1(3), - .enable_high = true, - .init_data = &mmc0_fixed_voltage_init_data, -}; - -static struct platform_device mmc0_fixed_voltage = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &mmc0_fixed_voltage_config, - }, -}; - -/* SD */ -static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = { - .max_width = 4, - .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, - .ext_cd_gpio = S5PV310_GPX3(4), /* XEINT_28 */ - .ext_cd_gpio_invert = 1, - .cd_type = S3C_SDHCI_CD_GPIO, - .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, -}; - -/* WiFi */ -static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = { - .max_width = 4, - .host_caps = MMC_CAP_4_BIT_DATA | - MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_DISABLE, - .cd_type = S3C_SDHCI_CD_EXTERNAL, -}; - -static void __init universal_sdhci_init(void) -{ - s3c_sdhci0_set_platdata(&universal_hsmmc0_data); - s3c_sdhci2_set_platdata(&universal_hsmmc2_data); - s3c_sdhci3_set_platdata(&universal_hsmmc3_data); -} - -/* I2C0 */ -static struct i2c_board_info i2c0_devs[] __initdata = { - /* Camera, To be updated */ -}; - -/* I2C1 */ -static struct i2c_board_info i2c1_devs[] __initdata = { - /* Gyro, To be updated */ -}; - -static struct platform_device *universal_devices[] __initdata = { - /* Samsung Platform Devices */ - &mmc0_fixed_voltage, - &s3c_device_hsmmc0, - &s3c_device_hsmmc2, - &s3c_device_hsmmc3, - - /* Universal Devices */ - &universal_gpio_keys, - &s5p_device_onenand, -}; - -static void __init universal_map_io(void) -{ - s5p_init_io(NULL, 0, S5P_VA_CHIPID); - s3c24xx_init_clocks(24000000); - s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); -} - -static void __init universal_machine_init(void) -{ - universal_sdhci_init(); - - i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); - i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); - - /* Last */ - platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); -} - -MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") - /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, - .init_irq = s5pv310_init_irq, - .map_io = universal_map_io, - .init_machine = universal_machine_init, - .timer = &s5pv310_timer, -MACHINE_END diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 2bd4ccf..c2eafd9 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -812,7 +812,7 @@ config CACHE_L2X0 bool "Enable the L2x0 outer cache controller" depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \ - ARCH_NOMADIK || ARCH_OMAP4 || ARCH_S5PV310 || ARCH_TEGRA || \ + ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \ ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE default y select OUTER_CACHE diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index eb105e6..d9c4096 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -56,13 +56,6 @@ config S3C24XX_DCLK help Clock code for supporting DCLK/CLKOUT on S3C24XX architectures -config S3C24XX_PWM - bool "PWM device support" - select HAVE_PWM - help - Support for exporting the PWM timer blocks via the pwm device - system. - # gpio configurations config S3C24XX_GPIO_EXTRA diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 557f8c5..8492297 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -7,10 +7,10 @@ config PLAT_S5P bool - depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) + depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4) default y - select ARM_VIC if !ARCH_S5PV310 - select ARM_GIC if ARCH_S5PV310 + select ARM_VIC if !ARCH_EXYNOS4 + select ARM_GIC if ARCH_EXYNOS4 select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_GPIO_TRACK @@ -37,11 +37,16 @@ config S5P_GPIO_INT help Common code for the GPIO interrupts (other than external interrupts.) +config S5P_HRT + bool + help + Use the High Resolution timer support + comment "System MMU" config S5P_SYSTEM_MMU bool "S5P SYSTEM MMU" - depends on ARCH_S5PV310 + depends on ARCH_EXYNOS4 help Say Y here if you want to enable System MMU @@ -60,6 +65,11 @@ config S5P_DEV_FIMC2 help Compile in platform device definitions for FIMC controller 2 +config S5P_DEV_FIMC3 + bool + help + Compile in platform device definitions for FIMC controller 3 + config S5P_DEV_ONENAND bool help @@ -74,3 +84,8 @@ config S5P_DEV_CSIS1 bool help Compile in platform device definitions for MIPI-CSIS channel 1 + +config S5P_SETUP_MIPIPHY + bool + help + Compile in common setup code for MIPI-CSIS and MIPI-DSIM devices diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 4bd5cf9..42afff7 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -22,12 +22,15 @@ obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += irq-pm.o +obj-$(CONFIG_S5P_HRT) += s5p-time.o # devices obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o +obj-$(CONFIG_S5P_DEV_FIMC3) += dev-fimc3.o obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o +obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index 047d31c..c3bfe9b 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -1,7 +1,7 @@ /* linux/arch/arm/plat-s5p/cpu.c * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * S5P CPU Support * @@ -12,17 +12,20 @@ #include <linux/init.h> #include <linux/module.h> -#include <mach/map.h> + #include <asm/mach/arch.h> #include <asm/mach/map.h> + +#include <mach/map.h> #include <mach/regs-clock.h> + #include <plat/cpu.h> #include <plat/s5p6440.h> #include <plat/s5p6442.h> #include <plat/s5p6450.h> #include <plat/s5pc100.h> #include <plat/s5pv210.h> -#include <plat/s5pv310.h> +#include <plat/exynos4.h> /* table of supported CPUs */ @@ -31,7 +34,7 @@ static const char name_s5p6442[] = "S5P6442"; static const char name_s5p6450[] = "S5P6450"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; -static const char name_s5pv310[] = "S5PV310"; +static const char name_exynos4210[] = "EXYNOS4210"; static struct cpu_table cpu_ids[] __initdata = { { @@ -75,13 +78,13 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s5pv210_init, .name = name_s5pv210, }, { - .idcode = 0x43200000, + .idcode = 0x43210000, .idmask = 0xfffff000, - .map_io = s5pv310_map_io, - .init_clocks = s5pv310_init_clocks, - .init_uarts = s5pv310_init_uarts, - .init = s5pv310_init, - .name = name_s5pv310, + .map_io = exynos4_map_io, + .init_clocks = exynos4_init_clocks, + .init_uarts = exynos4_init_uarts, + .init = exynos4_init, + .name = name_exynos4210, }, }; diff --git a/arch/arm/plat-s5p/dev-csis0.c b/arch/arm/plat-s5p/dev-csis0.c index dfab1c8..e3aabef 100644 --- a/arch/arm/plat-s5p/dev-csis0.c +++ b/arch/arm/plat-s5p/dev-csis0.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Samsung Electronics + * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. * * S5P series device definition for MIPI-CSIS channel 0 * diff --git a/arch/arm/plat-s5p/dev-csis1.c b/arch/arm/plat-s5p/dev-csis1.c index e3053f2..08b91b5 100644 --- a/arch/arm/plat-s5p/dev-csis1.c +++ b/arch/arm/plat-s5p/dev-csis1.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Samsung Electronics + * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. * * S5P series device definition for MIPI-CSIS channel 1 * diff --git a/arch/arm/plat-s5p/dev-fimc3.c b/arch/arm/plat-s5p/dev-fimc3.c new file mode 100644 index 0000000..ef31bec --- /dev/null +++ b/arch/arm/plat-s5p/dev-fimc3.c @@ -0,0 +1,43 @@ +/* linux/arch/arm/plat-s5p/dev-fimc3.c + * + * Copyright (c) 2010 Samsung Electronics + * + * Base S5P FIMC3 resource and device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <mach/map.h> + +static struct resource s5p_fimc3_resource[] = { + [0] = { + .start = S5P_PA_FIMC3, + .end = S5P_PA_FIMC3 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_FIMC3, + .end = IRQ_FIMC3, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 s5p_fimc3_dma_mask = DMA_BIT_MASK(32); + +struct platform_device s5p_device_fimc3 = { + .name = "s5p-fimc", + .id = 3, + .num_resources = ARRAY_SIZE(s5p_fimc3_resource), + .resource = s5p_fimc3_resource, + .dev = { + .dma_mask = &s5p_fimc3_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; diff --git a/arch/arm/plat-s5p/include/plat/camport.h b/arch/arm/plat-s5p/include/plat/camport.h new file mode 100644 index 0000000..71688c8 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/camport.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * + * S5P series camera interface helper functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef PLAT_S5P_CAMPORT_H_ +#define PLAT_S5P_CAMPORT_H_ __FILE__ + +enum s5p_camport_id { + S5P_CAMPORT_A, + S5P_CAMPORT_B, +}; + +/* + * The helper functions to configure GPIO for the camera parallel bus. + * The camera port can be multiplexed with any FIMC entity, even multiple + * FIMC entities are allowed to be attached to a single port simultaneously. + * These functions are to be used in the board setup code. + */ +int s5pv210_fimc_setup_gpio(enum s5p_camport_id id); +int exynos4_fimc_setup_gpio(enum s5p_camport_id id); + +#endif diff --git a/arch/arm/plat-s5p/include/plat/csis.h b/arch/arm/plat-s5p/include/plat/csis.h deleted file mode 100644 index 51e308c..0000000 --- a/arch/arm/plat-s5p/include/plat/csis.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics - * - * S5P series MIPI CSI slave device support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef PLAT_S5P_CSIS_H_ -#define PLAT_S5P_CSIS_H_ __FILE__ - -/** - * struct s5p_platform_mipi_csis - platform data for MIPI-CSIS - * @clk_rate: bus clock frequency - * @lanes: number of data lanes used - * @alignment: data alignment in bits - * @hs_settle: HS-RX settle time - */ -struct s5p_platform_mipi_csis { - unsigned long clk_rate; - u8 lanes; - u8 alignment; - u8 hs_settle; -}; - -#endif /* PLAT_S5P_CSIS_H_ */ diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h new file mode 100644 index 0000000..907caab --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/exynos4.h @@ -0,0 +1,34 @@ +/* linux/arch/arm/plat-s5p/include/plat/exynos4.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header file for exynos4 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for EXYNOS4 related SoCs */ + +extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void exynos4_register_clocks(void); +extern void exynos4_setup_clocks(void); + +#ifdef CONFIG_CPU_EXYNOS4210 + +extern int exynos4_init(void); +extern void exynos4_init_irq(void); +extern void exynos4_map_io(void); +extern void exynos4_init_clocks(int xtal); +extern struct sys_timer exynos4_timer; + +#define exynos4_init_uarts exynos4_common_init_uarts + +#else +#define exynos4_init_clocks NULL +#define exynos4_init_uarts NULL +#define exynos4_map_io NULL +#define exynos4_init NULL +#endif diff --git a/arch/arm/plat-s5p/include/plat/mipi_csis.h b/arch/arm/plat-s5p/include/plat/mipi_csis.h new file mode 100644 index 0000000..9bd254c --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/mipi_csis.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. + * + * S5P series MIPI CSI slave device support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef PLAT_S5P_MIPI_CSIS_H_ +#define PLAT_S5P_MIPI_CSIS_H_ __FILE__ + +struct platform_device; + +/** + * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver + * @clk_rate: bus clock frequency + * @lanes: number of data lanes used + * @alignment: data alignment in bits + * @hs_settle: HS-RX settle time + * @fixed_phy_vdd: false to enable external D-PHY regulator management in the + * driver or true in case this regulator has no enable function + * @phy_enable: pointer to a callback controlling D-PHY enable/reset + */ +struct s5p_platform_mipi_csis { + unsigned long clk_rate; + u8 lanes; + u8 alignment; + u8 hs_settle; + bool fixed_phy_vdd; + int (*phy_enable)(struct platform_device *pdev, bool on); +}; + +/** + * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control + * @pdev: MIPI-CSIS platform device + * @on: true to enable D-PHY and deassert its reset + * false to disable D-PHY + */ +int s5p_csis_phy_enable(struct platform_device *pdev, bool on); + +#endif /* PLAT_S5P_MIPI_CSIS_H_ */ diff --git a/arch/arm/plat-s5p/include/plat/s5p-time.h b/arch/arm/plat-s5p/include/plat/s5p-time.h new file mode 100644 index 0000000..575e881 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/s5p-time.h @@ -0,0 +1,40 @@ +/* linux/arch/arm/plat-s5p/include/plat/s5p-time.h + * + * Copyright 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Header file for s5p time support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_S5P_TIME_H +#define __ASM_PLAT_S5P_TIME_H __FILE__ + +/* S5P HR-Timer Clock mode */ +enum s5p_timer_mode { + S5P_PWM0, + S5P_PWM1, + S5P_PWM2, + S5P_PWM3, + S5P_PWM4, +}; + +struct s5p_timer_source { + unsigned int event_id; + unsigned int source_id; +}; + +/* Be able to sleep for atleast 4 seconds (usually more) */ +#define S5PTIMER_MIN_RANGE 4 + +#define TCNT_MAX 0xffffffff +#define NON_PERIODIC 0 +#define PERIODIC 1 + +extern void __init s5p_set_timer_source(enum s5p_timer_mode event, + enum s5p_timer_mode source); +extern struct sys_timer s5p_timer; +#endif /* __ASM_PLAT_S5P_TIME_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5pv310.h b/arch/arm/plat-s5p/include/plat/s5pv310.h deleted file mode 100644 index 769c991..0000000 --- a/arch/arm/plat-s5p/include/plat/s5pv310.h +++ /dev/null @@ -1,34 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5pv310.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5pv310 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5PV310 related SoCs */ - -extern void s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5pv310_register_clocks(void); -extern void s5pv310_setup_clocks(void); - -#ifdef CONFIG_CPU_S5PV310 - -extern int s5pv310_init(void); -extern void s5pv310_init_irq(void); -extern void s5pv310_map_io(void); -extern void s5pv310_init_clocks(int xtal); -extern struct sys_timer s5pv310_timer; - -#define s5pv310_init_uarts s5pv310_common_init_uarts - -#else -#define s5pv310_init_clocks NULL -#define s5pv310_init_uarts NULL -#define s5pv310_map_io NULL -#define s5pv310_init NULL -#endif diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-s5p/include/plat/sysmmu.h new file mode 100644 index 0000000..bf5283c --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/sysmmu.h @@ -0,0 +1,95 @@ +/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung System MMU driver for S5P platform + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM__PLAT_SYSMMU_H +#define __ASM__PLAT_SYSMMU_H __FILE__ + +enum S5P_SYSMMU_INTERRUPT_TYPE { + SYSMMU_PAGEFAULT, + SYSMMU_AR_MULTIHIT, + SYSMMU_AW_MULTIHIT, + SYSMMU_BUSERROR, + SYSMMU_AR_SECURITY, + SYSMMU_AR_ACCESS, + SYSMMU_AW_SECURITY, + SYSMMU_AW_PROTECTION, /* 7 */ + SYSMMU_FAULTS_NUM +}; + +#ifdef CONFIG_S5P_SYSTEM_MMU + +#include <mach/sysmmu.h> + +/** + * s5p_sysmmu_enable() - enable system mmu of ip + * @ips: The ip connected system mmu. + * #pgd: Base physical address of the 1st level page table + * + * This function enable system mmu to transfer address + * from virtual address to physical address + */ +void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd); + +/** + * s5p_sysmmu_disable() - disable sysmmu mmu of ip + * @ips: The ip connected system mmu. + * + * This function disable system mmu to transfer address + * from virtual address to physical address + */ +void s5p_sysmmu_disable(sysmmu_ips ips); + +/** + * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table + * @ips: The ip connected system mmu. + * @pgd: The page table base address. + * + * This function set page table base address + * When system mmu transfer address from virtaul address to physical address, + * system mmu refer address information from page table + */ +void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd); + +/** + * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu + * @ips: The ip connected system mmu. + * + * This function flush all TLB entry in system mmu + */ +void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips); + +/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs + * @itype: type of fault. + * @pgtable_base: the physical address of page table base. This is 0 if @ips is + * SYSMMU_BUSERROR. + * @fault_addr: the device (virtual) address that the System MMU tried to + * translated. This is 0 if @ips is SYSMMU_BUSERROR. + * Called when interrupt occurred by the System MMUs + * The device drivers of peripheral devices that has a System MMU can implement + * a fault handler to resolve address translation fault by System MMU. + * The meanings of return value and parameters are described below. + + * return value: non-zero if the fault is correctly resolved. + * zero if the fault is not handled. + */ +void s5p_sysmmu_set_fault_handler(sysmmu_ips ips, + int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype, + unsigned long pgtable_base, + unsigned long fault_addr)); +#else +#define s5p_sysmmu_enable(ips, pgd) do { } while (0) +#define s5p_sysmmu_disable(ips) do { } while (0) +#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0) +#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0) +#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0) +#endif +#endif /* __ASM_PLAT_SYSMMU_H */ diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 3b6bf89..cd87d32 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -17,82 +17,79 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/slab.h> #include <mach/map.h> #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> -#define S5P_GPIOREG(x) (S5P_VA_GPIO + (x)) +#define GPIO_BASE(chip) (((unsigned long)(chip)->base) & 0xFFFFF000u) -#define GPIOINT_CON_OFFSET 0x700 -#define GPIOINT_MASK_OFFSET 0x900 -#define GPIOINT_PEND_OFFSET 0xA00 +#define CON_OFFSET 0x700 +#define MASK_OFFSET 0x900 +#define PEND_OFFSET 0xA00 +#define REG_OFFSET(x) ((x) << 2) -static struct s3c_gpio_chip *irq_chips[S5P_GPIOINT_GROUP_MAXNR]; - -static int s5p_gpioint_get_group(struct irq_data *data) -{ - struct gpio_chip *chip = irq_data_get_irq_data(data); - struct s3c_gpio_chip *s3c_chip = container_of(chip, - struct s3c_gpio_chip, chip); - int group; - - for (group = 0; group < S5P_GPIOINT_GROUP_MAXNR; group++) - if (s3c_chip == irq_chips[group]) - break; +struct s5p_gpioint_bank { + struct list_head list; + int start; + int nr_groups; + int irq; + struct s3c_gpio_chip **chips; + void (*handler)(unsigned int, struct irq_desc *); +}; - return group; -} +LIST_HEAD(banks); static int s5p_gpioint_get_offset(struct irq_data *data) { - struct gpio_chip *chip = irq_data_get_irq_data(data); - struct s3c_gpio_chip *s3c_chip = container_of(chip, - struct s3c_gpio_chip, chip); - - return data->irq - s3c_chip->irq_base; + struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); + return data->irq - chip->irq_base; } static void s5p_gpioint_ack(struct irq_data *data) { + struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); int group, offset, pend_offset; unsigned int value; - group = s5p_gpioint_get_group(data); + group = chip->group; offset = s5p_gpioint_get_offset(data); - pend_offset = group << 2; + pend_offset = REG_OFFSET(group); - value = __raw_readl(S5P_GPIOREG(GPIOINT_PEND_OFFSET) + pend_offset); - value |= 1 << offset; - __raw_writel(value, S5P_GPIOREG(GPIOINT_PEND_OFFSET) + pend_offset); + value = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset); + value |= BIT(offset); + __raw_writel(value, GPIO_BASE(chip) + PEND_OFFSET + pend_offset); } static void s5p_gpioint_mask(struct irq_data *data) { + struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); int group, offset, mask_offset; unsigned int value; - group = s5p_gpioint_get_group(data); + group = chip->group; offset = s5p_gpioint_get_offset(data); - mask_offset = group << 2; + mask_offset = REG_OFFSET(group); - value = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset); - value |= 1 << offset; - __raw_writel(value, S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset); + value = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset); + value |= BIT(offset); + __raw_writel(value, GPIO_BASE(chip) + MASK_OFFSET + mask_offset); } static void s5p_gpioint_unmask(struct irq_data *data) { + struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); int group, offset, mask_offset; unsigned int value; - group = s5p_gpioint_get_group(data); + group = chip->group; offset = s5p_gpioint_get_offset(data); - mask_offset = group << 2; + mask_offset = REG_OFFSET(group); - value = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset); - value &= ~(1 << offset); - __raw_writel(value, S5P_GPIOREG(GPIOINT_MASK_OFFSET) + mask_offset); + value = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset); + value &= ~BIT(offset); + __raw_writel(value, GPIO_BASE(chip) + MASK_OFFSET + mask_offset); } static void s5p_gpioint_mask_ack(struct irq_data *data) @@ -103,12 +100,13 @@ static void s5p_gpioint_mask_ack(struct irq_data *data) static int s5p_gpioint_set_type(struct irq_data *data, unsigned int type) { + struct s3c_gpio_chip *chip = irq_data_get_irq_data(data); int group, offset, con_offset; unsigned int value; - group = s5p_gpioint_get_group(data); + group = chip->group; offset = s5p_gpioint_get_offset(data); - con_offset = group << 2; + con_offset = REG_OFFSET(group); switch (type) { case IRQ_TYPE_EDGE_RISING: @@ -132,15 +130,15 @@ static int s5p_gpioint_set_type(struct irq_data *data, unsigned int type) return -EINVAL; } - value = __raw_readl(S5P_GPIOREG(GPIOINT_CON_OFFSET) + con_offset); + value = __raw_readl(GPIO_BASE(chip) + CON_OFFSET + con_offset); value &= ~(0x7 << (offset * 0x4)); value |= (type << (offset * 0x4)); - __raw_writel(value, S5P_GPIOREG(GPIOINT_CON_OFFSET) + con_offset); + __raw_writel(value, GPIO_BASE(chip) + CON_OFFSET + con_offset); return 0; } -struct irq_chip s5p_gpioint = { +static struct irq_chip s5p_gpioint = { .name = "s5p_gpioint", .irq_ack = s5p_gpioint_ack, .irq_mask = s5p_gpioint_mask, @@ -151,30 +149,29 @@ struct irq_chip s5p_gpioint = { static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) { - int group, offset, pend_offset, mask_offset; - int real_irq; + struct s5p_gpioint_bank *bank = get_irq_data(irq); + int group, pend_offset, mask_offset; unsigned int pend, mask; - for (group = 0; group < S5P_GPIOINT_GROUP_MAXNR; group++) { - pend_offset = group << 2; - pend = __raw_readl(S5P_GPIOREG(GPIOINT_PEND_OFFSET) + - pend_offset); + for (group = 0; group < bank->nr_groups; group++) { + struct s3c_gpio_chip *chip = bank->chips[group]; + if (!chip) + continue; + + pend_offset = REG_OFFSET(group); + pend = __raw_readl(GPIO_BASE(chip) + PEND_OFFSET + pend_offset); if (!pend) continue; - mask_offset = group << 2; - mask = __raw_readl(S5P_GPIOREG(GPIOINT_MASK_OFFSET) + - mask_offset); + mask_offset = REG_OFFSET(group); + mask = __raw_readl(GPIO_BASE(chip) + MASK_OFFSET + mask_offset); pend &= ~mask; - for (offset = 0; offset < 8; offset++) { - if (pend & (1 << offset)) { - struct s3c_gpio_chip *chip = irq_chips[group]; - if (chip) { - real_irq = chip->irq_base + offset; - generic_handle_irq(real_irq); - } - } + while (pend) { + int offset = fls(pend) - 1; + int real_irq = chip->irq_base + offset; + generic_handle_irq(real_irq); + pend &= ~BIT(offset); } } } @@ -182,27 +179,48 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) { static int used_gpioint_groups = 0; - static bool handler_registered = 0; int irq, group = chip->group; int i; + struct s5p_gpioint_bank *bank = NULL; if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) return -ENOMEM; + list_for_each_entry(bank, &banks, list) { + if (group >= bank->start && + group < bank->start + bank->nr_groups) + break; + } + if (!bank) + return -EINVAL; + + if (!bank->handler) { + bank->chips = kzalloc(sizeof(struct s3c_gpio_chip *) * + bank->nr_groups, GFP_KERNEL); + if (!bank->chips) + return -ENOMEM; + + set_irq_chained_handler(bank->irq, s5p_gpioint_handler); + set_irq_data(bank->irq, bank); + bank->handler = s5p_gpioint_handler; + printk(KERN_INFO "Registered chained gpio int handler for interrupt %d.\n", + bank->irq); + } + + /* + * chained GPIO irq has been sucessfully registered, allocate new gpio + * int group and assign irq nubmers + */ + chip->irq_base = S5P_GPIOINT_BASE + used_gpioint_groups * S5P_GPIOINT_GROUP_SIZE; used_gpioint_groups++; - if (!handler_registered) { - set_irq_chained_handler(IRQ_GPIOINT, s5p_gpioint_handler); - handler_registered = 1; - } - - irq_chips[group] = chip; + bank->chips[group - bank->start] = chip; for (i = 0; i < chip->chip.ngpio; i++) { irq = chip->irq_base + i; set_irq_chip(irq, &s5p_gpioint); - set_irq_data(irq, &chip->chip); + set_irq_data(irq, chip); set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID); } @@ -235,3 +253,19 @@ int __init s5p_register_gpio_interrupt(int pin) } return ret; } + +int __init s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups) +{ + struct s5p_gpioint_bank *bank; + + bank = kzalloc(sizeof(*bank), GFP_KERNEL); + if (!bank) + return -ENOMEM; + + bank->start = start; + bank->nr_groups = nr_groups; + bank->irq = chain_irq; + + list_add_tail(&bank->list, &banks); + return 0; +} diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c new file mode 100644 index 0000000..8090403 --- /dev/null +++ b/arch/arm/plat-s5p/s5p-time.c @@ -0,0 +1,448 @@ +/* linux/arch/arm/plat-s5p/s5p-time.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P - Common hr-timer support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/platform_device.h> + +#include <asm/smp_twd.h> +#include <asm/mach/time.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/sched_clock.h> + +#include <mach/map.h> +#include <plat/devs.h> +#include <plat/regs-timer.h> +#include <plat/s5p-time.h> + +static struct clk *tin_event; +static struct clk *tin_source; +static struct clk *tdiv_event; +static struct clk *tdiv_source; +static struct clk *timerclk; +static struct s5p_timer_source timer_source; +static unsigned long clock_count_per_tick; +static void s5p_timer_resume(void); + +static void s5p_time_stop(enum s5p_timer_mode mode) +{ + unsigned long tcon; + + tcon = __raw_readl(S3C2410_TCON); + + switch (mode) { + case S5P_PWM0: + tcon &= ~S3C2410_TCON_T0START; + break; + + case S5P_PWM1: + tcon &= ~S3C2410_TCON_T1START; + break; + + case S5P_PWM2: + tcon &= ~S3C2410_TCON_T2START; + break; + + case S5P_PWM3: + tcon &= ~S3C2410_TCON_T3START; + break; + + case S5P_PWM4: + tcon &= ~S3C2410_TCON_T4START; + break; + + default: + printk(KERN_ERR "Invalid Timer %d\n", mode); + break; + } + __raw_writel(tcon, S3C2410_TCON); +} + +static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt) +{ + unsigned long tcon; + + tcon = __raw_readl(S3C2410_TCON); + + tcnt--; + + switch (mode) { + case S5P_PWM0: + tcon &= ~(0x0f << 0); + tcon |= S3C2410_TCON_T0MANUALUPD; + break; + + case S5P_PWM1: + tcon &= ~(0x0f << 8); + tcon |= S3C2410_TCON_T1MANUALUPD; + break; + + case S5P_PWM2: + tcon &= ~(0x0f << 12); + tcon |= S3C2410_TCON_T2MANUALUPD; + break; + + case S5P_PWM3: + tcon &= ~(0x0f << 16); + tcon |= S3C2410_TCON_T3MANUALUPD; + break; + + case S5P_PWM4: + tcon &= ~(0x07 << 20); + tcon |= S3C2410_TCON_T4MANUALUPD; + break; + + default: + printk(KERN_ERR "Invalid Timer %d\n", mode); + break; + } + + __raw_writel(tcnt, S3C2410_TCNTB(mode)); + __raw_writel(tcnt, S3C2410_TCMPB(mode)); + __raw_writel(tcon, S3C2410_TCON); +} + +static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) +{ + unsigned long tcon; + + tcon = __raw_readl(S3C2410_TCON); + + switch (mode) { + case S5P_PWM0: + tcon |= S3C2410_TCON_T0START; + tcon &= ~S3C2410_TCON_T0MANUALUPD; + + if (periodic) + tcon |= S3C2410_TCON_T0RELOAD; + else + tcon &= ~S3C2410_TCON_T0RELOAD; + break; + + case S5P_PWM1: + tcon |= S3C2410_TCON_T1START; + tcon &= ~S3C2410_TCON_T1MANUALUPD; + + if (periodic) + tcon |= S3C2410_TCON_T1RELOAD; + else + tcon &= ~S3C2410_TCON_T1RELOAD; + break; + + case S5P_PWM2: + tcon |= S3C2410_TCON_T2START; + tcon &= ~S3C2410_TCON_T2MANUALUPD; + + if (periodic) + tcon |= S3C2410_TCON_T2RELOAD; + else + tcon &= ~S3C2410_TCON_T2RELOAD; + break; + + case S5P_PWM3: + tcon |= S3C2410_TCON_T3START; + tcon &= ~S3C2410_TCON_T3MANUALUPD; + + if (periodic) + tcon |= S3C2410_TCON_T3RELOAD; + else + tcon &= ~S3C2410_TCON_T3RELOAD; + break; + + case S5P_PWM4: + tcon |= S3C2410_TCON_T4START; + tcon &= ~S3C2410_TCON_T4MANUALUPD; + + if (periodic) + tcon |= S3C2410_TCON_T4RELOAD; + else + tcon &= ~S3C2410_TCON_T4RELOAD; + break; + + default: + printk(KERN_ERR "Invalid Timer %d\n", mode); + break; + } + __raw_writel(tcon, S3C2410_TCON); +} + +static int s5p_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + s5p_time_setup(timer_source.event_id, cycles); + s5p_time_start(timer_source.event_id, NON_PERIODIC); + + return 0; +} + +static void s5p_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + s5p_time_stop(timer_source.event_id); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + s5p_time_setup(timer_source.event_id, clock_count_per_tick); + s5p_time_start(timer_source.event_id, PERIODIC); + break; + + case CLOCK_EVT_MODE_ONESHOT: + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + break; + + case CLOCK_EVT_MODE_RESUME: + s5p_timer_resume(); + break; + } +} + +static void s5p_timer_resume(void) +{ + /* event timer restart */ + s5p_time_setup(timer_source.event_id, clock_count_per_tick); + s5p_time_start(timer_source.event_id, PERIODIC); + + /* source timer restart */ + s5p_time_setup(timer_source.source_id, TCNT_MAX); + s5p_time_start(timer_source.source_id, PERIODIC); +} + +void __init s5p_set_timer_source(enum s5p_timer_mode event, + enum s5p_timer_mode source) +{ + s3c_device_timer[event].dev.bus = &platform_bus_type; + s3c_device_timer[source].dev.bus = &platform_bus_type; + + timer_source.event_id = event; + timer_source.source_id = source; +} + +static struct clock_event_device time_event_device = { + .name = "s5p_event_timer", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .set_next_event = s5p_set_next_event, + .set_mode = s5p_set_mode, +}; + +static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction s5p_clock_event_irq = { + .name = "s5p_time_irq", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = s5p_clock_event_isr, + .dev_id = &time_event_device, +}; + +static void __init s5p_clockevent_init(void) +{ + unsigned long pclk; + unsigned long clock_rate; + unsigned int irq_number; + struct clk *tscaler; + + pclk = clk_get_rate(timerclk); + + tscaler = clk_get_parent(tdiv_event); + + clk_set_rate(tscaler, pclk / 2); + clk_set_rate(tdiv_event, pclk / 2); + clk_set_parent(tin_event, tdiv_event); + + clock_rate = clk_get_rate(tin_event); + clock_count_per_tick = clock_rate / HZ; + + clockevents_calc_mult_shift(&time_event_device, + clock_rate, S5PTIMER_MIN_RANGE); + time_event_device.max_delta_ns = + clockevent_delta2ns(-1, &time_event_device); + time_event_device.min_delta_ns = + clockevent_delta2ns(1, &time_event_device); + + time_event_device.cpumask = cpumask_of(0); + clockevents_register_device(&time_event_device); + + irq_number = timer_source.event_id + IRQ_TIMER0; + setup_irq(irq_number, &s5p_clock_event_irq); +} + +static cycle_t s5p_timer_read(struct clocksource *cs) +{ + unsigned long offset = 0; + + switch (timer_source.source_id) { + case S5P_PWM0: + case S5P_PWM1: + case S5P_PWM2: + case S5P_PWM3: + offset = (timer_source.source_id * 0x0c) + 0x14; + break; + + case S5P_PWM4: + offset = 0x40; + break; + + default: + printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id); + return 0; + } + + return (cycle_t) ~__raw_readl(S3C_TIMERREG(offset)); +} + +/* + * Override the global weak sched_clock symbol with this + * local implementation which uses the clocksource to get some + * better resolution when scheduling the kernel. We accept that + * this wraps around for now, since it is just a relative time + * stamp. (Inspired by U300 implementation.) + */ +static DEFINE_CLOCK_DATA(cd); + +unsigned long long notrace sched_clock(void) +{ + u32 cyc; + unsigned long offset = 0; + + switch (timer_source.source_id) { + case S5P_PWM0: + case S5P_PWM1: + case S5P_PWM2: + case S5P_PWM3: + offset = (timer_source.source_id * 0x0c) + 0x14; + break; + + case S5P_PWM4: + offset = 0x40; + break; + + default: + printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id); + return 0; + } + + cyc = ~__raw_readl(S3C_TIMERREG(offset)); + return cyc_to_sched_clock(&cd, cyc, (u32)~0); +} + +static void notrace s5p_update_sched_clock(void) +{ + u32 cyc; + unsigned long offset = 0; + + switch (timer_source.source_id) { + case S5P_PWM0: + case S5P_PWM1: + case S5P_PWM2: + case S5P_PWM3: + offset = (timer_source.source_id * 0x0c) + 0x14; + break; + + case S5P_PWM4: + offset = 0x40; + break; + + default: + printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id); + } + + cyc = ~__raw_readl(S3C_TIMERREG(offset)); + update_sched_clock(&cd, cyc, (u32)~0); +} + +struct clocksource time_clocksource = { + .name = "s5p_clocksource_timer", + .rating = 250, + .read = s5p_timer_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void __init s5p_clocksource_init(void) +{ + unsigned long pclk; + unsigned long clock_rate; + + pclk = clk_get_rate(timerclk); + + clk_set_rate(tdiv_source, pclk / 2); + clk_set_parent(tin_source, tdiv_source); + + clock_rate = clk_get_rate(tin_source); + + init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate); + + s5p_time_setup(timer_source.source_id, TCNT_MAX); + s5p_time_start(timer_source.source_id, PERIODIC); + + if (clocksource_register_hz(&time_clocksource, clock_rate)) + panic("%s: can't register clocksource\n", time_clocksource.name); +} + +static void __init s5p_timer_resources(void) +{ + + unsigned long event_id = timer_source.event_id; + unsigned long source_id = timer_source.source_id; + + timerclk = clk_get(NULL, "timers"); + if (IS_ERR(timerclk)) + panic("failed to get timers clock for timer"); + + clk_enable(timerclk); + + tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin"); + if (IS_ERR(tin_event)) + panic("failed to get pwm-tin clock for event timer"); + + tdiv_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tdiv"); + if (IS_ERR(tdiv_event)) + panic("failed to get pwm-tdiv clock for event timer"); + + clk_enable(tin_event); + + tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin"); + if (IS_ERR(tin_source)) + panic("failed to get pwm-tin clock for source timer"); + + tdiv_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tdiv"); + if (IS_ERR(tdiv_source)) + panic("failed to get pwm-tdiv clock for source timer"); + + clk_enable(tin_source); +} + +static void __init s5p_timer_init(void) +{ + s5p_timer_resources(); + s5p_clockevent_init(); + s5p_clocksource_init(); +} + +struct sys_timer s5p_timer = { + .init = s5p_timer_init, +}; diff --git a/arch/arm/plat-s5p/setup-mipiphy.c b/arch/arm/plat-s5p/setup-mipiphy.c new file mode 100644 index 0000000..683c466 --- /dev/null +++ b/arch/arm/plat-s5p/setup-mipiphy.c @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * + * S5P - Helper functions for MIPI-CSIS and MIPI-DSIM D-PHY control + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <mach/regs-clock.h> + +static int __s5p_mipi_phy_control(struct platform_device *pdev, + bool on, u32 reset) +{ + static DEFINE_SPINLOCK(lock); + void __iomem *addr; + unsigned long flags; + int pid; + u32 cfg; + + if (!pdev) + return -EINVAL; + + pid = (pdev->id == -1) ? 0 : pdev->id; + + if (pid != 0 && pid != 1) + return -EINVAL; + + addr = S5P_MIPI_DPHY_CONTROL(pid); + + spin_lock_irqsave(&lock, flags); + + cfg = __raw_readl(addr); + cfg = on ? (cfg | reset) : (cfg & ~reset); + __raw_writel(cfg, addr); + + if (on) { + cfg |= S5P_MIPI_DPHY_ENABLE; + } else if (!(cfg & (S5P_MIPI_DPHY_SRESETN | + S5P_MIPI_DPHY_MRESETN) & ~reset)) { + cfg &= ~S5P_MIPI_DPHY_ENABLE; + } + + __raw_writel(cfg, addr); + spin_unlock_irqrestore(&lock, flags); + + return 0; +} + +int s5p_csis_phy_enable(struct platform_device *pdev, bool on) +{ + return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_SRESETN); +} + +int s5p_dsim_phy_enable(struct platform_device *pdev, bool on) +{ + return __s5p_mipi_phy_control(pdev, on, S5P_MIPI_DPHY_MRESETN); +} diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c index ffe8a48..54f5edd 100644 --- a/arch/arm/plat-s5p/sysmmu.c +++ b/arch/arm/plat-s5p/sysmmu.c @@ -12,280 +12,266 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <asm/pgtable.h> + #include <mach/map.h> #include <mach/regs-sysmmu.h> -#include <mach/sysmmu.h> +#include <plat/sysmmu.h> + +#define CTRL_ENABLE 0x5 +#define CTRL_BLOCK 0x7 +#define CTRL_DISABLE 0x0 + +static struct device *dev; + +static unsigned short fault_reg_offset[SYSMMU_FAULTS_NUM] = { + S5P_PAGE_FAULT_ADDR, + S5P_AR_FAULT_ADDR, + S5P_AW_FAULT_ADDR, + S5P_DEFAULT_SLAVE_ADDR, + S5P_AR_FAULT_ADDR, + S5P_AR_FAULT_ADDR, + S5P_AW_FAULT_ADDR, + S5P_AW_FAULT_ADDR +}; + +static char *sysmmu_fault_name[SYSMMU_FAULTS_NUM] = { + "PAGE FAULT", + "AR MULTI-HIT FAULT", + "AW MULTI-HIT FAULT", + "BUS ERROR", + "AR SECURITY PROTECTION FAULT", + "AR ACCESS PROTECTION FAULT", + "AW SECURITY PROTECTION FAULT", + "AW ACCESS PROTECTION FAULT" +}; -struct sysmmu_controller s5p_sysmmu_cntlrs[S5P_SYSMMU_TOTAL_IPNUM]; +static int (*fault_handlers[S5P_SYSMMU_TOTAL_IPNUM])( + enum S5P_SYSMMU_INTERRUPT_TYPE itype, + unsigned long pgtable_base, + unsigned long fault_addr); -void s5p_sysmmu_register(struct sysmmu_controller *sysmmuconp) +/* + * If adjacent 2 bits are true, the system MMU is enabled. + * The system MMU is disabled, otherwise. + */ +static unsigned long sysmmu_states; + +static inline void set_sysmmu_active(sysmmu_ips ips) { - unsigned int reg_mmu_ctrl; - unsigned int reg_mmu_status; - unsigned int reg_pt_base_addr; - unsigned int reg_int_status; - unsigned int reg_page_ft_addr; - - reg_int_status = __raw_readl(sysmmuconp->regs + S5P_INT_STATUS); - reg_mmu_ctrl = __raw_readl(sysmmuconp->regs + S5P_MMU_CTRL); - reg_mmu_status = __raw_readl(sysmmuconp->regs + S5P_MMU_STATUS); - reg_pt_base_addr = __raw_readl(sysmmuconp->regs + S5P_PT_BASE_ADDR); - reg_page_ft_addr = __raw_readl(sysmmuconp->regs + S5P_PAGE_FAULT_ADDR); - - printk(KERN_INFO "%s: ips:%s\n", __func__, sysmmuconp->name); - printk(KERN_INFO "%s: MMU_CTRL:0x%X, ", __func__, reg_mmu_ctrl); - printk(KERN_INFO "MMU_STATUS:0x%X, PT_BASE_ADDR:0x%X\n", reg_mmu_status, reg_pt_base_addr); - printk(KERN_INFO "%s: INT_STATUS:0x%X, PAGE_FAULT_ADDR:0x%X\n", __func__, reg_int_status, reg_page_ft_addr); - - switch (reg_int_status & 0xFF) { - case 0x1: - printk(KERN_INFO "%s: Page fault\n", __func__); - printk(KERN_INFO "%s: Virtual address causing last page fault or bus error : 0x%x\n", __func__ , reg_page_ft_addr); - break; - case 0x2: - printk(KERN_INFO "%s: AR multi-hit fault\n", __func__); - break; - case 0x4: - printk(KERN_INFO "%s: AW multi-hit fault\n", __func__); - break; - case 0x8: - printk(KERN_INFO "%s: Bus error\n", __func__); - break; - case 0x10: - printk(KERN_INFO "%s: AR Security protection fault\n", __func__); - break; - case 0x20: - printk(KERN_INFO "%s: AR Access protection fault\n", __func__); - break; - case 0x40: - printk(KERN_INFO "%s: AW Security protection fault\n", __func__); - break; - case 0x80: - printk(KERN_INFO "%s: AW Access protection fault\n", __func__); - break; - } + sysmmu_states |= 3 << (ips * 2); } -static irqreturn_t s5p_sysmmu_irq(int irq, void *dev_id) +static inline void set_sysmmu_inactive(sysmmu_ips ips) { - unsigned int i; - unsigned int reg_int_status; - struct sysmmu_controller *sysmmuconp; - - for (i = 0; i < S5P_SYSMMU_TOTAL_IPNUM; i++) { - sysmmuconp = &s5p_sysmmu_cntlrs[i]; - - if (sysmmuconp->enable == true) { - reg_int_status = __raw_readl(sysmmuconp->regs + S5P_INT_STATUS); - - if (reg_int_status & 0xFF) - s5p_sysmmu_register(sysmmuconp); - } - } - return IRQ_HANDLED; + sysmmu_states &= ~(3 << (ips * 2)); } -int s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd) +static inline int is_sysmmu_active(sysmmu_ips ips) { - struct sysmmu_controller *sysmmuconp = NULL; - - sysmmuconp = &s5p_sysmmu_cntlrs[ips]; - - if (sysmmuconp == NULL) { - printk(KERN_ERR "failed to get ip's sysmmu info\n"); - return 1; - } - - /* Set sysmmu page table base address */ - __raw_writel(pgd, sysmmuconp->regs + S5P_PT_BASE_ADDR); + return sysmmu_states & (3 << (ips * 2)); +} - if (s5p_sysmmu_tlb_invalidate(ips) != 0) - printk(KERN_ERR "failed s5p_sysmmu_tlb_invalidate\n"); +static void __iomem *sysmmusfrs[S5P_SYSMMU_TOTAL_IPNUM]; - return 0; +static inline void sysmmu_block(sysmmu_ips ips) +{ + __raw_writel(CTRL_BLOCK, sysmmusfrs[ips] + S5P_MMU_CTRL); + dev_dbg(dev, "%s is blocked.\n", sysmmu_ips_name[ips]); } -static int s5p_sysmmu_set_tablebase(sysmmu_ips ips) +static inline void sysmmu_unblock(sysmmu_ips ips) { - unsigned int pg; - struct sysmmu_controller *sysmmuconp; + __raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL); + dev_dbg(dev, "%s is unblocked.\n", sysmmu_ips_name[ips]); +} - sysmmuconp = &s5p_sysmmu_cntlrs[ips]; +static inline void __sysmmu_tlb_invalidate(sysmmu_ips ips) +{ + __raw_writel(0x1, sysmmusfrs[ips] + S5P_MMU_FLUSH); + dev_dbg(dev, "TLB of %s is invalidated.\n", sysmmu_ips_name[ips]); +} - if (sysmmuconp == NULL) { - printk(KERN_ERR "failed to get ip's sysmmu info\n"); - return 1; +static inline void __sysmmu_set_ptbase(sysmmu_ips ips, unsigned long pgd) +{ + if (unlikely(pgd == 0)) { + pgd = (unsigned long)ZERO_PAGE(0); + __raw_writel(0x20, sysmmusfrs[ips] + S5P_MMU_CFG); /* 4KB LV1 */ + } else { + __raw_writel(0x0, sysmmusfrs[ips] + S5P_MMU_CFG); /* 16KB LV1 */ } - __asm__("mrc p15, 0, %0, c2, c0, 0" \ - : "=r" (pg) : : "cc"); \ - pg &= ~0x3fff; + __raw_writel(pgd, sysmmusfrs[ips] + S5P_PT_BASE_ADDR); - printk(KERN_INFO "%s: CP15 TTBR0 : 0x%x\n", __func__, pg); - - /* Set sysmmu page table base address */ - __raw_writel(pg, sysmmuconp->regs + S5P_PT_BASE_ADDR); + dev_dbg(dev, "Page table base of %s is initialized with 0x%08lX.\n", + sysmmu_ips_name[ips], pgd); + __sysmmu_tlb_invalidate(ips); +} - return 0; +void sysmmu_set_fault_handler(sysmmu_ips ips, + int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype, + unsigned long pgtable_base, + unsigned long fault_addr)) +{ + BUG_ON(!((ips >= SYSMMU_MDMA) && (ips < S5P_SYSMMU_TOTAL_IPNUM))); + fault_handlers[ips] = handler; } -int s5p_sysmmu_enable(sysmmu_ips ips) +static irqreturn_t s5p_sysmmu_irq(int irq, void *dev_id) { - unsigned int reg; + /* SYSMMU is in blocked when interrupt occurred. */ + unsigned long base = 0; + sysmmu_ips ips = (sysmmu_ips)dev_id; + enum S5P_SYSMMU_INTERRUPT_TYPE itype; - struct sysmmu_controller *sysmmuconp; + itype = (enum S5P_SYSMMU_INTERRUPT_TYPE) + __ffs(__raw_readl(sysmmusfrs[ips] + S5P_INT_STATUS)); - sysmmuconp = &s5p_sysmmu_cntlrs[ips]; + BUG_ON(!((itype >= 0) && (itype < 8))); - if (sysmmuconp == NULL) { - printk(KERN_ERR "failed to get ip's sysmmu info\n"); - return 1; - } + dev_alert(dev, "%s occurred by %s.\n", sysmmu_fault_name[itype], + sysmmu_ips_name[ips]); - s5p_sysmmu_set_tablebase(ips); + if (fault_handlers[ips]) { + unsigned long addr; - /* replacement policy : LRU */ - reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CFG); - reg |= 0x1; - __raw_writel(reg, sysmmuconp->regs + S5P_MMU_CFG); + base = __raw_readl(sysmmusfrs[ips] + S5P_PT_BASE_ADDR); + addr = __raw_readl(sysmmusfrs[ips] + fault_reg_offset[itype]); - /* Enable interrupt, Enable MMU */ - reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CTRL); - reg |= (0x1 << 2) | (0x1 << 0); + if (fault_handlers[ips](itype, base, addr)) { + __raw_writel(1 << itype, + sysmmusfrs[ips] + S5P_INT_CLEAR); + dev_notice(dev, "%s from %s is resolved." + " Retrying translation.\n", + sysmmu_fault_name[itype], sysmmu_ips_name[ips]); + } else { + base = 0; + } + } - __raw_writel(reg, sysmmuconp->regs + S5P_MMU_CTRL); + sysmmu_unblock(ips); - sysmmuconp->enable = true; + if (!base) + dev_notice(dev, "%s from %s is not handled.\n", + sysmmu_fault_name[itype], sysmmu_ips_name[ips]); - return 0; + return IRQ_HANDLED; } -int s5p_sysmmu_disable(sysmmu_ips ips) +void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd) { - unsigned int reg; - - struct sysmmu_controller *sysmmuconp = NULL; - - if (ips > S5P_SYSMMU_TOTAL_IPNUM) - printk(KERN_ERR "failed to get ips parameter\n"); - - sysmmuconp = &s5p_sysmmu_cntlrs[ips]; - - if (sysmmuconp == NULL) { - printk(KERN_ERR "failed to get ip's sysmmu info\n"); - return 1; + if (is_sysmmu_active(ips)) { + sysmmu_block(ips); + __sysmmu_set_ptbase(ips, pgd); + sysmmu_unblock(ips); + } else { + dev_dbg(dev, "%s is disabled. " + "Skipping initializing page table base.\n", + sysmmu_ips_name[ips]); } +} - reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CFG); - - /* replacement policy : LRU */ - reg |= 0x1; - __raw_writel(reg, sysmmuconp->regs + S5P_MMU_CFG); - - reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CTRL); +void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd) +{ + if (!is_sysmmu_active(ips)) { + sysmmu_clk_enable(ips); - /* Disable MMU */ - reg &= ~0x1; - __raw_writel(reg, sysmmuconp->regs + S5P_MMU_CTRL); + __sysmmu_set_ptbase(ips, pgd); - sysmmuconp->enable = false; + __raw_writel(CTRL_ENABLE, sysmmusfrs[ips] + S5P_MMU_CTRL); - return 0; + set_sysmmu_active(ips); + dev_dbg(dev, "%s is enabled.\n", sysmmu_ips_name[ips]); + } else { + dev_dbg(dev, "%s is already enabled.\n", sysmmu_ips_name[ips]); + } } -int s5p_sysmmu_tlb_invalidate(sysmmu_ips ips) +void s5p_sysmmu_disable(sysmmu_ips ips) { - unsigned int reg; - struct sysmmu_controller *sysmmuconp = NULL; - - sysmmuconp = &s5p_sysmmu_cntlrs[ips]; - - if (sysmmuconp == NULL) { - printk(KERN_ERR "failed to get ip's sysmmu info\n"); - return 1; + if (is_sysmmu_active(ips)) { + __raw_writel(CTRL_DISABLE, sysmmusfrs[ips] + S5P_MMU_CTRL); + set_sysmmu_inactive(ips); + sysmmu_clk_disable(ips); + dev_dbg(dev, "%s is disabled.\n", sysmmu_ips_name[ips]); + } else { + dev_dbg(dev, "%s is already disabled.\n", sysmmu_ips_name[ips]); } +} - /* set Block MMU for flush TLB */ - reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CTRL); - reg |= 0x1 << 1; - __raw_writel(reg, sysmmuconp->regs + S5P_MMU_CTRL); - - /* flush all TLB entry */ - __raw_writel(0x1, sysmmuconp->regs + S5P_MMU_FLUSH); - - /* set Un-block MMU after flush TLB */ - reg = __raw_readl(sysmmuconp->regs + S5P_MMU_CTRL); - reg &= ~(0x1 << 1); - __raw_writel(reg, sysmmuconp->regs + S5P_MMU_CTRL); - - return 0; +void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips) +{ + if (is_sysmmu_active(ips)) { + sysmmu_block(ips); + __sysmmu_tlb_invalidate(ips); + sysmmu_unblock(ips); + } else { + dev_dbg(dev, "%s is disabled. " + "Skipping invalidating TLB.\n", sysmmu_ips_name[ips]); + } } static int s5p_sysmmu_probe(struct platform_device *pdev) { - int i; - int ret; - struct resource *res; - struct sysmmu_controller *sysmmuconp; - sysmmu_ips ips; + int i, ret; + struct resource *res, *mem; + + dev = &pdev->dev; for (i = 0; i < S5P_SYSMMU_TOTAL_IPNUM; i++) { - sysmmuconp = &s5p_sysmmu_cntlrs[i]; - if (sysmmuconp == NULL) { - printk(KERN_ERR "failed to get ip's sysmmu info\n"); - ret = -ENOENT; - goto err_res; - } + int irq; - sysmmuconp->name = sysmmu_ips_name[i]; + sysmmu_clk_init(dev, i); + sysmmu_clk_disable(i); res = platform_get_resource(pdev, IORESOURCE_MEM, i); if (!res) { - printk(KERN_ERR "failed to get sysmmu resource\n"); + dev_err(dev, "Failed to get the resource of %s.\n", + sysmmu_ips_name[i]); ret = -ENODEV; goto err_res; } - sysmmuconp->mem = request_mem_region(res->start, + mem = request_mem_region(res->start, ((res->end) - (res->start)) + 1, pdev->name); - if (!sysmmuconp->mem) { - pr_err("failed to request sysmmu memory region\n"); + if (!mem) { + dev_err(dev, "Failed to request the memory region of %s.\n", + sysmmu_ips_name[i]); ret = -EBUSY; goto err_res; } - sysmmuconp->regs = ioremap(res->start, res->end - res->start + 1); - if (!sysmmuconp->regs) { - pr_err("failed to sysmmu ioremap\n"); + sysmmusfrs[i] = ioremap(res->start, res->end - res->start + 1); + if (!sysmmusfrs[i]) { + dev_err(dev, "Failed to ioremap() for %s.\n", + sysmmu_ips_name[i]); ret = -ENXIO; goto err_reg; } - sysmmuconp->irq = platform_get_irq(pdev, i); - if (sysmmuconp->irq <= 0) { - pr_err("failed to get sysmmu irq resource\n"); + irq = platform_get_irq(pdev, i); + if (irq <= 0) { + dev_err(dev, "Failed to get the IRQ resource of %s.\n", + sysmmu_ips_name[i]); ret = -ENOENT; goto err_map; } - ret = request_irq(sysmmuconp->irq, s5p_sysmmu_irq, IRQF_DISABLED, pdev->name, sysmmuconp); - if (ret) { - pr_err("failed to request irq\n"); + if (request_irq(irq, s5p_sysmmu_irq, IRQF_DISABLED, + pdev->name, (void *)i)) { + dev_err(dev, "Failed to request IRQ for %s.\n", + sysmmu_ips_name[i]); ret = -ENOENT; goto err_map; } - - ips = (sysmmu_ips)i; - - sysmmuconp->ips = ips; } return 0; -err_reg: - release_mem_region((resource_size_t)sysmmuconp->mem, (resource_size_t)((res->end) - (res->start) + 1)); err_map: - iounmap(sysmmuconp->regs); + iounmap(sysmmusfrs[i]); +err_reg: + release_mem_region(mem->start, resource_size(mem)); err_res: return ret; } diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 32be05c..be72100 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -273,6 +273,19 @@ config SAMSUNG_DEV_KEYPAD help Compile in platform device definitions for keypad +config SAMSUNG_DEV_PWM + bool + default y if ARCH_S3C2410 + help + Compile in platform device definition for PWM Timer + +config S3C24XX_PWM + bool "PWM device support" + select HAVE_PWM + help + Support for exporting the PWM timer blocks via the pwm device + system + # DMA config S3C_DMA diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 29932f8..e9de58a 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o obj-$(CONFIG_SAMSUNG_DEV_IDE) += dev-ide.o obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o +obj-$(CONFIG_SAMSUNG_DEV_PWM) += dev-pwm.o # DMA support diff --git a/arch/arm/plat-samsung/dev-pwm.c b/arch/arm/plat-samsung/dev-pwm.c new file mode 100644 index 0000000..dab47b0 --- /dev/null +++ b/arch/arm/plat-samsung/dev-pwm.c @@ -0,0 +1,53 @@ +/* linux/arch/arm/plat-samsung/dev-pwm.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright (c) 2007 Ben Dooks + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org> + * + * S3C series device definition for the PWM timer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> + +#include <plat/devs.h> + +#define TIMER_RESOURCE_SIZE (1) + +#define TIMER_RESOURCE(_tmr, _irq) \ + (struct resource [TIMER_RESOURCE_SIZE]) { \ + [0] = { \ + .start = _irq, \ + .end = _irq, \ + .flags = IORESOURCE_IRQ \ + } \ + } + +#define DEFINE_S3C_TIMER(_tmr_no, _irq) \ + .name = "s3c24xx-pwm", \ + .id = _tmr_no, \ + .num_resources = TIMER_RESOURCE_SIZE, \ + .resource = TIMER_RESOURCE(_tmr_no, _irq), \ + +/* + * since we already have an static mapping for the timer, + * we do not bother setting any IO resource for the base. + */ + +struct platform_device s3c_device_timer[] = { + [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) }, + [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) }, + [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) }, + [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) }, + [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) }, +}; +EXPORT_SYMBOL(s3c_device_timer); diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 9addb3d..cedfff5 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -82,6 +82,7 @@ extern struct sysdev_class s3c64xx_sysclass; extern struct sysdev_class s5p64x0_sysclass; extern struct sysdev_class s5p6442_sysclass; extern struct sysdev_class s5pv210_sysclass; +extern struct sysdev_class exynos4_sysclass; extern void (*s5pc1xx_idle)(void); diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index b4d208b..f0da6b7 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -1,5 +1,8 @@ /* arch/arm/plat-samsung/include/plat/devs.h * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * @@ -96,15 +99,16 @@ extern struct platform_device s5pv210_device_iis1; extern struct platform_device s5pv210_device_iis2; extern struct platform_device s5pv210_device_spdif; -extern struct platform_device s5pv310_device_ac97; -extern struct platform_device s5pv310_device_pcm0; -extern struct platform_device s5pv310_device_pcm1; -extern struct platform_device s5pv310_device_pcm2; -extern struct platform_device s5pv310_device_i2s0; -extern struct platform_device s5pv310_device_i2s1; -extern struct platform_device s5pv310_device_i2s2; -extern struct platform_device s5pv310_device_spdif; -extern struct platform_device s5pv310_device_pd[]; +extern struct platform_device exynos4_device_ac97; +extern struct platform_device exynos4_device_pcm0; +extern struct platform_device exynos4_device_pcm1; +extern struct platform_device exynos4_device_pcm2; +extern struct platform_device exynos4_device_i2s0; +extern struct platform_device exynos4_device_i2s1; +extern struct platform_device exynos4_device_i2s2; +extern struct platform_device exynos4_device_spdif; +extern struct platform_device exynos4_device_pd[]; +extern struct platform_device exynos4_device_ahci; extern struct platform_device s5p6442_device_pcm0; extern struct platform_device s5p6442_device_pcm1; @@ -133,11 +137,12 @@ extern struct platform_device samsung_device_keypad; extern struct platform_device s5p_device_fimc0; extern struct platform_device s5p_device_fimc1; extern struct platform_device s5p_device_fimc2; +extern struct platform_device s5p_device_fimc3; extern struct platform_device s5p_device_mipi_csis0; extern struct platform_device s5p_device_mipi_csis1; -extern struct platform_device s5pv310_device_sysmmu; +extern struct platform_device exynos4_device_sysmmu; /* s3c2440 specific devices */ diff --git a/arch/arm/plat-samsung/include/plat/fimc-core.h b/arch/arm/plat-samsung/include/plat/fimc-core.h index 81a3bfe..945a99d 100644 --- a/arch/arm/plat-samsung/include/plat/fimc-core.h +++ b/arch/arm/plat-samsung/include/plat/fimc-core.h @@ -38,6 +38,11 @@ static inline void s3c_fimc_setname(int id, char *name) s5p_device_fimc2.name = name; break; #endif +#ifdef CONFIG_S5P_DEV_FIMC3 + case 3: + s5p_device_fimc3.name = name; + break; +#endif } } diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index e4b5cf1..5e04fa6 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -225,4 +225,20 @@ extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr); */ extern int s5p_register_gpio_interrupt(int pin); +/** s5p_register_gpioint_bank() - add gpio bank for further gpio interrupt + * registration (see s5p_register_gpio_interrupt function) + * @chain_irq: chained irq number for the gpio int handler for this bank + * @start: start gpio group number of this bank + * @nr_groups: number of gpio groups handled by this bank + * + * This functions registers initial information about gpio banks that + * can be later used by the s5p_register_gpio_interrupt() function to + * enable support for gpio interrupt for particular gpio group. + */ +#ifdef CONFIG_S5P_GPIO_INT +extern int s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups); +#else +#define s5p_register_gpioint_bank(chain_irq, start, nr_groups) do { } while (0) +#endif + #endif /* __PLAT_GPIO_CFG_H */ diff --git a/arch/arm/plat-samsung/include/plat/pd.h b/arch/arm/plat-samsung/include/plat/pd.h index 5f0ad85..abb4bc3 100644 --- a/arch/arm/plat-samsung/include/plat/pd.h +++ b/arch/arm/plat-samsung/include/plat/pd.h @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-samsung/include/plat/pd.h * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify @@ -17,7 +17,7 @@ struct samsung_pd_info { void __iomem *base; }; -enum s5pv310_pd_block { +enum exynos4_pd_block { PD_MFC, PD_G3D, PD_LCD0, diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 5a41a0b..b0bdf16 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -1,4 +1,7 @@ -/* linux/arch/arm/plat-s3c/include/plat/sdhci.h +/* linux/arch/arm/plat-samsung/include/plat/sdhci.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics @@ -119,10 +122,10 @@ extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w); extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w); -extern void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *, int w); -extern void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *, int w); -extern void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *, int w); -extern void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *, int w); +extern void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *, int w); +extern void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *, int w); +extern void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *, int w); +extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w); /* S3C2416 SDHCI setup */ @@ -334,57 +337,57 @@ static inline void s5pv210_default_sdhci3(void) { } #endif /* CONFIG_S5PV210_SETUP_SDHCI */ -/* S5PV310 SDHCI setup */ -#ifdef CONFIG_S5PV310_SETUP_SDHCI -extern char *s5pv310_hsmmc_clksrcs[4]; +/* EXYNOS4 SDHCI setup */ +#ifdef CONFIG_EXYNOS4_SETUP_SDHCI +extern char *exynos4_hsmmc_clksrcs[4]; -extern void s5pv310_setup_sdhci_cfg_card(struct platform_device *dev, +extern void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, struct mmc_ios *ios, struct mmc_card *card); -static inline void s5pv310_default_sdhci0(void) +static inline void exynos4_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC - s3c_hsmmc0_def_platdata.clocks = s5pv310_hsmmc_clksrcs; - s3c_hsmmc0_def_platdata.cfg_gpio = s5pv310_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; + s3c_hsmmc0_def_platdata.clocks = exynos4_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio; + s3c_hsmmc0_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } -static inline void s5pv310_default_sdhci1(void) +static inline void exynos4_default_sdhci1(void) { #ifdef CONFIG_S3C_DEV_HSMMC1 - s3c_hsmmc1_def_platdata.clocks = s5pv310_hsmmc_clksrcs; - s3c_hsmmc1_def_platdata.cfg_gpio = s5pv310_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; + s3c_hsmmc1_def_platdata.clocks = exynos4_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio; + s3c_hsmmc1_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } -static inline void s5pv310_default_sdhci2(void) +static inline void exynos4_default_sdhci2(void) { #ifdef CONFIG_S3C_DEV_HSMMC2 - s3c_hsmmc2_def_platdata.clocks = s5pv310_hsmmc_clksrcs; - s3c_hsmmc2_def_platdata.cfg_gpio = s5pv310_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; + s3c_hsmmc2_def_platdata.clocks = exynos4_hsmmc_clksrcs; + s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio; + s3c_hsmmc2_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } -static inline void s5pv310_default_sdhci3(void) +static inline void exynos4_default_sdhci3(void) { #ifdef CONFIG_S3C_DEV_HSMMC3 - s3c_hsmmc3_def_platdata.clocks = s5pv310_hsmmc_clksrcs; - s3c_hsmmc3_def_platdata.cfg_gpio = s5pv310_setup_sdhci3_cfg_gpio; - s3c_hsmmc3_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card; + s3c_hsmmc3_def_platdata.clocks = exynos4_hsmmc_clksrcs; + s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio; + s3c_hsmmc3_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } #else -static inline void s5pv310_default_sdhci0(void) { } -static inline void s5pv310_default_sdhci1(void) { } -static inline void s5pv310_default_sdhci2(void) { } -static inline void s5pv310_default_sdhci3(void) { } +static inline void exynos4_default_sdhci0(void) { } +static inline void exynos4_default_sdhci1(void) { } +static inline void exynos4_default_sdhci2(void) { } +static inline void exynos4_default_sdhci3(void) { } -#endif /* CONFIG_S5PV310_SETUP_SDHCI */ +#endif /* CONFIG_EXYNOS4_SETUP_SDHCI */ #endif /* __PLAT_S3C_SDHCI_H */ diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c index 2eeb49f..f37457c 100644 --- a/arch/arm/plat-samsung/pwm.c +++ b/arch/arm/plat-samsung/pwm.c @@ -20,10 +20,8 @@ #include <linux/io.h> #include <linux/pwm.h> -#include <mach/irqs.h> #include <mach/map.h> -#include <plat/devs.h> #include <plat/regs-timer.h> struct pwm_device { @@ -47,37 +45,6 @@ struct pwm_device { static struct clk *clk_scaler[2]; -/* Standard setup for a timer block. */ - -#define TIMER_RESOURCE_SIZE (1) - -#define TIMER_RESOURCE(_tmr, _irq) \ - (struct resource [TIMER_RESOURCE_SIZE]) { \ - [0] = { \ - .start = _irq, \ - .end = _irq, \ - .flags = IORESOURCE_IRQ \ - } \ - } - -#define DEFINE_S3C_TIMER(_tmr_no, _irq) \ - .name = "s3c24xx-pwm", \ - .id = _tmr_no, \ - .num_resources = TIMER_RESOURCE_SIZE, \ - .resource = TIMER_RESOURCE(_tmr_no, _irq), \ - -/* since we already have an static mapping for the timer, we do not - * bother setting any IO resource for the base. - */ - -struct platform_device s3c_device_timer[] = { - [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) }, - [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) }, - [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) }, - [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) }, - [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) }, -}; - static inline int pwm_is_tdiv(struct pwm_device *pwm) { return clk_get_parent(pwm->clk) == pwm->clk_div; diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig index 4dbd0f5..4f42619 100644 --- a/drivers/mtd/onenand/Kconfig +++ b/drivers/mtd/onenand/Kconfig @@ -32,7 +32,7 @@ config MTD_ONENAND_OMAP2 config MTD_ONENAND_SAMSUNG tristate "OneNAND on Samsung SOC controller support" - depends on ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310 + depends on ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4 help Support for a OneNAND flash device connected to an Samsung SOC. S3C64XX/S5PC100 use command mapping method. diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 5c4b347..aa9d3d1 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -537,8 +537,8 @@ config SERIAL_S3C6400 config SERIAL_S5PV210 tristate "Samsung S5PV210 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_S5PV310) - select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_S5PV310) + depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442 || CPU_EXYNOS4210) + select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_EXYNOS4210) default y help Serial port support for Samsung's S5P Family of SoC's diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index a6a6b5f..d6713d5 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -1,6 +1,6 @@ config SND_SOC_SAMSUNG tristate "ASoC support for Samsung" - depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PV310 + depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_EXYNOS4 select S3C64XX_DMA if ARCH_S3C64XX select S3C2410_DMA if ARCH_S3C2410 help |