diff options
-rw-r--r-- | drivers/staging/rtl8187se/Makefile | 2 | ||||
-rw-r--r-- | drivers/staging/rtl8187se/ieee80211/dot11d.c | 2 | ||||
-rw-r--r-- | drivers/staging/rtl8187se/ieee80211/ieee80211.h | 14 | ||||
-rw-r--r-- | drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c | 24 | ||||
-rw-r--r-- | drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c | 2 | ||||
-rw-r--r-- | drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c | 2 | ||||
-rw-r--r-- | drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c | 2 | ||||
-rw-r--r-- | drivers/staging/rtl8187se/r8180.h | 10 | ||||
-rw-r--r-- | drivers/staging/rtl8187se/r8180_core.c | 30 | ||||
-rw-r--r-- | drivers/staging/rtl8187se/r8180_dm.c | 16 | ||||
-rw-r--r-- | drivers/staging/rtl8187se/r8180_rtl8225z2.c | 4 | ||||
-rw-r--r-- | drivers/staging/rtl8187se/r8180_wx.c | 6 | ||||
-rw-r--r-- | drivers/staging/rtl8187se/r8180_wx.h | 2 | ||||
-rw-r--r-- | drivers/staging/rtl8187se/r8185b_init.c | 10 |
14 files changed, 63 insertions, 63 deletions
diff --git a/drivers/staging/rtl8187se/Makefile b/drivers/staging/rtl8187se/Makefile index 72db504..91d1aa2 100644 --- a/drivers/staging/rtl8187se/Makefile +++ b/drivers/staging/rtl8187se/Makefile @@ -10,7 +10,7 @@ ccflags-y += -DHIGH_POWER ccflags-y += -DSW_DIG ccflags-y += -DRATE_ADAPT -#enable it for legacy power save, disable it for leisure power save +#enable it for legacy power save, disable it for leisure power save ccflags-y += -DENABLE_LPS diff --git a/drivers/staging/rtl8187se/ieee80211/dot11d.c b/drivers/staging/rtl8187se/ieee80211/dot11d.c index 309bb8b..0e93eb0 100644 --- a/drivers/staging/rtl8187se/ieee80211/dot11d.c +++ b/drivers/staging/rtl8187se/ieee80211/dot11d.c @@ -55,7 +55,7 @@ Dot11d_Reset(struct ieee80211_device *ieee) // // Description: -// Update country IE from Beacon or Probe Resopnse +// Update country IE from Beacon or Probe Response // and configure PHY for operation in the regulatory domain. // // TODO: diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h index 40dd715..b94c48b 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h @@ -834,7 +834,7 @@ enum ieee80211_state { /* the association procedure is sending AUTH request*/ IEEE80211_ASSOCIATING_AUTHENTICATING, - /* the association procedure has successfully authentcated + /* the association procedure has successfully authenticated * and is sending association request */ IEEE80211_ASSOCIATING_AUTHENTICATED, @@ -934,7 +934,7 @@ struct ieee80211_device { * with RX of broad/multicast frames */ /* Fragmentation structures */ - // each streaming contain a entry + /* each stream contains an entry */ struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN]; unsigned int frag_next_idx[17]; u16 fts; /* Fragmentation Threshold */ @@ -972,7 +972,7 @@ struct ieee80211_device { int rate; /* current rate */ int basic_rate; - //FIXME: pleace callback, see if redundant with softmac_features + //FIXME: please callback, see if redundant with softmac_features short active_scan; /* this contains flags for selectively enable softmac support */ @@ -1106,7 +1106,7 @@ struct ieee80211_device { /* used instead of hard_start_xmit (not softmac_hard_start_xmit) * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data - * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set + * frames. If the option IEEE_SOFTMAC_SINGLE_QUEUE is also set * then also management frames are sent via this callback. * This function can't sleep. */ @@ -1124,7 +1124,7 @@ struct ieee80211_device { /* ask to the driver to retune the radio . * This function can sleep. the driver should ensure - * the radio has been swithced before return. + * the radio has been switched before return. */ void (*set_chan)(struct net_device *dev,short ch); @@ -1135,7 +1135,7 @@ struct ieee80211_device { * The syncro version is similar to the start_scan but * does not return until all channels has been scanned. * this is called in user context and should sleep, - * it is called in a work_queue when swithcing to ad-hoc mode + * it is called in a work_queue when switching to ad-hoc mode * or in behalf of iwlist scan when the card is associated * and root user ask for a scan. * the function stop_scan should stop both the syncro and @@ -1196,7 +1196,7 @@ struct ieee80211_device { /* Generate probe requests */ #define IEEE_SOFTMAC_PROBERQ (1<<4) -/* Generate respones to probe requests */ +/* Generate response to probe requests */ #define IEEE_SOFTMAC_PROBERS (1<<5) /* The ieee802.11 stack will manages the netif queue diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c index 0f909b7..8173240 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c @@ -42,7 +42,7 @@ short ieee80211_is_shortslot(const struct ieee80211_network *net) return net->capability & WLAN_CAPABILITY_SHORT_SLOT; } -/* returns the total length needed for pleacing the RATE MFIE +/* returns the total length needed for placing the RATE MFIE * tag and the EXTENDED RATE MFIE tag if needed. * It encludes two bytes per tag for the tag itself and its len */ @@ -60,7 +60,7 @@ unsigned int ieee80211_MFIE_rate_len(struct ieee80211_device *ieee) return rate_len; } -/* pleace the MFIE rate, tag to the memory (double) poined. +/* place the MFIE rate, tag to the memory (double) poised. * Then it updates the pointer so that * it points after the new MFIE tag added. */ @@ -467,7 +467,7 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee) * So we switch to IEEE80211_LINKED_SCANNING to remember * that we are still logically linked (not interested in * new network events, despite for updating the net list, - * but we are temporarly 'unlinked' as the driver shall + * but we are temporarily 'unlinked' as the driver shall * not filter RX frames and the channel is changing. * So the only situation in witch are interested is to check * if the state become LINKED because of the #1 situation @@ -530,7 +530,7 @@ void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee) * So we switch to IEEE80211_LINKED_SCANNING to remember * that we are still logically linked (not interested in * new network events, despite for updating the net list, - * but we are temporarly 'unlinked' as the driver shall + * but we are temporarily 'unlinked' as the driver shall * not filter RX frames and the channel is changing. * So the only situation in witch are interested is to check * if the state become LINKED because of the #1 situation @@ -1140,7 +1140,7 @@ void ieee80211_associate_abort(struct ieee80211_device *ieee) ieee->associate_seq++; - /* don't scan, and avoid to have the RX path possibily + /* don't scan, and avoid to have the RX path possibly * try again to associate. Even do not react to AUTH or * ASSOC response. Just wait for the retry wq to be scheduled. * Here we will check if there are good nets to associate @@ -1346,14 +1346,14 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee //printk("apset=%d apmatch=%d ssidset=%d ssidbroad=%d ssidmatch=%d\n",apset,apmatch,ssidset,ssidbroad,ssidmatch); if ( /* if the user set the AP check if match. - * if the network does not broadcast essid we check the user supplyed ANY essid + * if the network does not broadcast essid we check the user supplied ANY essid * if the network does broadcast and the user does not set essid it is OK * if the network does broadcast and the user did set essid chech if essid match */ ( apset && apmatch && ((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset)) ) || /* if the ap is not set, check that the user set the bssid - * and the network does bradcast and that those two bssid matches + * and the network does broadcast and that those two bssid matches */ (!apset && ssidset && ssidbroad && ssidmatch) ){ @@ -1821,7 +1821,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb, while (left >= sizeof(struct ieee80211_info_element_hdr)) { if (sizeof(struct ieee80211_info_element_hdr) + info_element->len > left) { - printk(KERN_WARNING "[re]associate reeponse error!"); + printk(KERN_WARNING "[re]associate response error!"); return 1; } switch (info_element->id) { @@ -2184,15 +2184,15 @@ void ieee80211_start_ibss_wq(struct work_struct *work) if(ieee->state == IEEE80211_NOLINK) ieee->current_network.channel = 10; - /* if not then the state is not linked. Maybe the user swithced to + /* if not then the state is not linked. Maybe the user switched to * ad-hoc mode just after being in monitor mode, or just after * being very few time in managed mode (so the card have had no * time to scan all the chans..) or we have just run up the iface * after setting ad-hoc mode. So we have to give another try.. * Here, in ibss mode, should be safe to do this without extra care - * (in bss mode we had to make sure no-one tryed to associate when + * (in bss mode we had to make sure no-one tried to associate when * we had just checked the ieee->state and we was going to start the - * scan) beacause in ibss mode the ieee80211_new_net function, when + * scan) because in ibss mode the ieee80211_new_net function, when * finds a good net, just set the ieee->state to IEEE80211_LINKED, * so, at worst, we waste a bit of time to initiate an unneeded syncro * scan, that will stop at the first round because it sees the state @@ -2342,7 +2342,7 @@ void ieee80211_associate_retry_wq(struct work_struct *work) goto exit; /* until we do not set the state to IEEE80211_NOLINK * there are no possibility to have someone else trying - * to start an association procdure (we get here with + * to start an association procedure (we get here with * ieee->state = IEEE80211_ASSOCIATING). * When we set the state to IEEE80211_NOLINK it is possible * that the RX path run an attempt to associate, but diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c index e46ff2f..5d20490 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c @@ -362,7 +362,7 @@ int ieee80211_wx_set_essid(struct ieee80211_device *ieee, ieee80211_stop_protocol(ieee); /* this is just to be sure that the GET wx callback - * has consisten infos. not needed otherwise + * has consistent infos. not needed otherwise */ spin_lock_irqsave(&ieee->lock, flags); diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c index 552115c..77bb068 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c @@ -328,7 +328,7 @@ int ieee80211_rtl_xmit(struct sk_buff *skb, //printk(KERN_WARNING "upper layer packet!\n"); spin_lock_irqsave(&ieee->lock, flags); - /* If there is no driver handler to take the TXB, dont' bother + /* If there is no driver handler to take the TXB, don't bother * creating it... */ if ((!ieee->hard_start_xmit && !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE))|| ((!ieee->softmac_data_hard_start_xmit && (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)))) { diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c index ca414a9..c7917b2 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c @@ -363,7 +363,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, (*crypt)->priv); sec.flags |= (1 << key); /* This ensures a key will be activated if no key is - * explicitely set */ + * explicitly set */ if (key == sec.active_key) sec.flags |= SEC_ACTIVE_KEY; ieee->tx_keyidx = key;//by wb 080312 diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h index a2c46ae..2682afb 100644 --- a/drivers/staging/rtl8187se/r8180.h +++ b/drivers/staging/rtl8187se/r8180.h @@ -11,7 +11,7 @@ Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver - We want to tanks the Authors of those projects and the Ndiswrapper + We want to thanks the Authors of those projects and the Ndiswrapper project Authors. */ @@ -514,12 +514,12 @@ typedef struct r8180_priv bool bDefaultAntenna1; u8 SignalStrength; long Stats_SignalStrength; - long LastSignalStrengthInPercent; // In percentange, used for smoothing, e.g. Moving Average. + long LastSignalStrengthInPercent; // In percentage, used for smoothing, e.g. Moving Average. u8 SignalQuality; // in 0-100 index. long Stats_SignalQuality; long RecvSignalPower; // in dBm. long Stats_RecvSignalPower; - u8 LastRxPktAntenna; // +by amy 080312 Antenn which received the lasted packet. 0: Aux, 1:Main. Added by Roger, 2008.01.25. + u8 LastRxPktAntenna; // +by amy 080312 Antenna which received the lasted packet. 0: Aux, 1:Main. Added by Roger, 2008.01.25. u32 AdRxOkCnt; long AdRxSignalStrength; u8 CurrAntennaIndex; // Index to current Antenna (both Tx and Rx). @@ -530,7 +530,7 @@ typedef struct r8180_priv long AdRxSsThreshold; // Signal strength threshold to switch antenna. long AdMaxRxSsThreshold; // Max value of AdRxSsThreshold. bool bAdSwitchedChecking; // TRUE if we shall shall check Rx signal strength for last time switching antenna. - long AdRxSsBeforeSwitched; // Rx signal strength before we swithed antenna. + long AdRxSsBeforeSwitched; // Rx signal strength before we switched antenna. struct timer_list SwAntennaDiversityTimer; //by amy for antenna //{by amy 080312 @@ -553,7 +553,7 @@ typedef struct r8180_priv bool bDigMechanism; // TRUE if DIG is enabled, FALSE ow. bool bRegHighPowerMechanism; // For High Power Mechanism. 061010, by rcnjko. u32 FalseAlarmRegValue; - u8 RegDigOfdmFaUpTh; // Upper threhold of OFDM false alarm, which is used in DIG. + u8 RegDigOfdmFaUpTh; // Upper threshold of OFDM false alarm, which is used in DIG. u8 DIG_NumberFallbackVote; u8 DIG_NumberUpgradeVote; // For HW antenna diversity, added by Roger, 2008.01.30. diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c index 4fe52f6..a513ec7 100644 --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -1329,7 +1329,7 @@ u16 N_DBPSOfRate(u16 DataRate) } /* - * For Netgear case, they want good-looking singal strength. + * For Netgear case, they want good-looking signal strength. */ long NetgearSignalStrengthTranslate(long LastSS, long CurrSS) { @@ -1380,7 +1380,7 @@ long TranslateToDbm8185(u8 SignalStrengthIndex) /* * Perform signal smoothing for dynamic mechanism. - * This is different with PerformSignalSmoothing8185 in smoothing fomula. + * This is different with PerformSignalSmoothing8185 in smoothing formula. * No dramatic adjustion is apply because dynamic mechanism need some degree * of correctness. Ported from 8187B. */ @@ -1535,7 +1535,7 @@ void rtl8180_rx(struct net_device *dev) /* HW is probably passing several buggy frames * without FD or LD flag set. * Throw this garbage away to prevent skb - * memory exausting + * memory exhausting */ if (!priv->rx_skb_complete) dev_kfree_skb_any(priv->rx_skb); @@ -1648,14 +1648,14 @@ void rtl8180_rx(struct net_device *dev) priv->Stats_SignalQuality = (long)(priv->Stats_SignalQuality * 5 + (long)priv->SignalQuality + 5) / 6; priv->Stats_RecvSignalPower = (long)(priv->Stats_RecvSignalPower * 5 + priv->RecvSignalPower - 1) / 6; - /* Figure out which antenna that received the lasted packet. */ + /* Figure out which antenna that received the last packet. */ priv->LastRxPktAntenna = Antenna ? 1 : 0; /* 0: aux, 1: main. */ SwAntennaDiversityRxOk8185(dev, priv->SignalStrength); } if (first) { if (!priv->rx_skb_complete) { - /* seems that HW sometimes fails to reiceve and + /* seems that HW sometimes fails to receive and doesn't provide the last descriptor */ dev_kfree_skb_any(priv->rx_skb); priv->stats.rxnolast++; @@ -1672,7 +1672,7 @@ void rtl8180_rx(struct net_device *dev) priv->rx_skb_complete = 0; priv->rx_skb->dev = dev; } else { - /* if we are here we should have already RXed + /* if we are here we should have already RXed * the first frame. * If we get here and the skb is not allocated then * we have just throw out garbage (skb not allocated) @@ -1821,15 +1821,15 @@ rate) { /* * This is a rough attempt to TX a frame * This is called by the ieee 80211 stack to TX management frames. - * If the ring is full packet are dropped (for data frame the queue + * If the ring is full packets are dropped (for data frame the queue * is stopped before this can happen). For this reason it is better * if the descriptors are larger than the largest management frame - * we intend to TX: i'm unsure what the HW does if it will not found + * we intend to TX: i'm unsure what the HW does if it will not find * the last fragment of a frame because it has been dropped... * Since queues for Management and Data frames are different we * might use a different lock than tx_lock (for example mgmt_tx_lock) */ -/* these function may loops if invoked with 0 descriptors or 0 len buffer */ +/* these function may loop if invoked with 0 descriptors or 0 len buffer */ int rtl8180_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); @@ -2378,7 +2378,7 @@ void rtl8180_wmm_param_update(struct work_struct *work) u8 u1bAIFS; u32 u4bAcParam; pAcParam = (PAC_PARAM)(&AcParam); - /* Retrive paramters to udpate. */ + /* Retrieve paramters to update. */ u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * (((mode&IEEE_G) == IEEE_G) ? 9 : 20) + aSifsTime; u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit))<<AC_PARAM_TXOP_LIMIT_OFFSET)| (((u32)(pAcParam->f.Ecw.f.ECWmax))<<AC_PARAM_ECW_MAX_OFFSET)| @@ -2414,7 +2414,7 @@ void rtl8180_wmm_param_update(struct work_struct *work) u8 u1bAIFS; u32 u4bAcParam; - /* Retrive paramters to udpate. */ + /* Retrieve paramters to update. */ eACI = pAcParam->f.AciAifsn.f.ACI; /* Mode G/A: slotTimeTimer = 9; Mode B: 20 */ u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * (((mode&IEEE_G) == IEEE_G) ? 9 : 20) + aSifsTime; @@ -2700,7 +2700,7 @@ short rtl8180_init(struct net_device *dev) priv->bTxPowerTrack = false; priv->ThermalMeter = 0; priv->FalseAlarmRegValue = 0; - priv->RegDigOfdmFaUpTh = 0xc; /* Upper threhold of OFDM false alarm, which is used in DIG. */ + priv->RegDigOfdmFaUpTh = 0xc; /* Upper threshold of OFDM false alarm, which is used in DIG. */ priv->DIG_NumberFallbackVote = 0; priv->DIG_NumberUpgradeVote = 0; priv->LastSignalStrengthInPercent = 0; @@ -2896,7 +2896,7 @@ short rtl8180_init(struct net_device *dev) priv->chtxpwr_ofdm[i+1] = (word & 0xff00) >> 8; } - /* 3Read crystal calibtration and thermal meter indication on 87SE. */ + /* 3Read crystal calibration and thermal meter indication on 87SE. */ eeprom_93cx6_read(&eeprom, EEPROM_RSV>>1, &tmpu16); /* Crystal calibration for Xin and Xout resp. */ @@ -3140,7 +3140,7 @@ void rtl8180_adapter_start(struct net_device *dev) /* * The following is very strange. seems to be that 1 means test mode, - * but we need to acknolwledges the nic when a packet is ready + * but we need to acknowledges the nic when a packet is ready * although we set it to 0 */ @@ -3971,7 +3971,7 @@ irqreturn_t rtl8180_interrupt(int irq, void *netdev, struct pt_regs *regs) } if (inta == 0xffff) { - /* HW disappared */ + /* HW disappeared */ spin_unlock_irqrestore(&priv->irq_th_lock, flags); return IRQ_HANDLED; } diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c index 4d7a595..b8f2ba0 100644 --- a/drivers/staging/rtl8187se/r8180_dm.c +++ b/drivers/staging/rtl8187se/r8180_dm.c @@ -2,7 +2,7 @@ #include "r8180_hw.h" #include "r8180_93cx6.h" - /* Return TRUE if we shall perform High Power Mecahnism, FALSE otherwise. */ + /* Return TRUE if we shall perform High Power Mechanism, FALSE otherwise. */ #define RATE_ADAPTIVE_TIMER_PERIOD 300 bool CheckHighPower(struct net_device *dev) @@ -105,7 +105,7 @@ void rtl8180_tx_pw_wq(struct work_struct *work) /* - * Return TRUE if we shall perform DIG Mecahnism, FALSE otherwise. + * Return TRUE if we shall perform DIG Mechanism, FALSE otherwise. */ bool CheckDig(struct net_device *dev) { @@ -507,7 +507,7 @@ void StaRateAdaptive87SE(struct net_device *dev) * and retry rate. * (3) Remove all Initial Gain Updates over OFDM rate. To avoid the complicated * situation, Initial Gain Update is upon on DIG mechanism except CCK rate. - * (4) Add the mehanism of trying to upgrade tx rate. + * (4) Add the mechanism of trying to upgrade tx rate. * (5) Record the information of upping tx rate to avoid trying upping tx rate constantly. * */ @@ -528,7 +528,7 @@ void StaRateAdaptive87SE(struct net_device *dev) if (priv->bTryuping == true) { /* 2 For Test Upgrading mechanism * Note: - * Sometimes the throughput is upon on the capability bwtween the AP and NIC, + * Sometimes the throughput is upon on the capability between the AP and NIC, * thus the low data rate does not improve the performance. * We randomly upgrade the data rate and check if the retry rate is improved. */ @@ -704,7 +704,7 @@ void StaRateAdaptive87SE(struct net_device *dev) /* * The difference in throughput between 48Mbps and 36Mbps is 8M. - * So, we must be carefully in this rate scale. Isaiah 2008-02-15. + * So, we must be careful in this rate scale. Isaiah 2008-02-15. */ if (((priv->CurrentOperaRate == 72) || (priv->CurrentOperaRate == 48) || (priv->CurrentOperaRate == 36)) && (priv->FailTxRateCount > 2)) @@ -1009,7 +1009,7 @@ void SwAntennaDiversity(struct net_device *dev) if (priv->AdCheckPeriod > priv->AdMaxCheckPeriod) priv->AdCheckPeriod = priv->AdMaxCheckPeriod; - /* Wrong deceision => switch back. */ + /* Wrong decision => switch back. */ SwitchAntenna(dev); } else { /* Rx Signal Strength is improved. */ @@ -1057,7 +1057,7 @@ void SwAntennaDiversity(struct net_device *dev) } /* * <Roger_Notes> We evaluate Rx signal strength ONLY when default antenna - * didn't changed by HW evaluation. + * didn't change by HW evaluation. * 2008.02.27. * * [TRC Dell Lab] SignalStrength is inaccuracy. Isaiah 2008-03-05 @@ -1098,7 +1098,7 @@ void SwAntennaDiversity(struct net_device *dev) priv->AdAuxAntennaRxOkCnt = 0; } - /* Return TRUE if we shall perform Tx Power Tracking Mecahnism, FALSE otherwise. */ + /* Return TRUE if we shall perform Tx Power Tracking Mechanism, FALSE otherwise. */ bool CheckTxPwrTracking(struct net_device *dev) { struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c index ee5b867..d28c1d9 100644 --- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c +++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c @@ -190,7 +190,7 @@ static void rtl8225_SetTXPowerLevel(struct net_device *dev, short ch) write_phy_cck(dev, 0x44 + i, power); } - /* FIXME Is this delay really needeed ? */ + /* FIXME Is this delay really needed ? */ force_pci_posting(dev); mdelay(1); @@ -479,7 +479,7 @@ s8 DbmToTxPwrIdx(struct r8180_priv *priv, WIRELESS_MODE WirelessMode, /* * TRUE if we want to use a default implementation. - * We shall set it to FALSE when we have exact translation formular + * We shall set it to FALSE when we have exact translation formula * for target IC. 070622, by rcnjko. */ if (bUseDefault) { diff --git a/drivers/staging/rtl8187se/r8180_wx.c b/drivers/staging/rtl8187se/r8180_wx.c index 303ec69..46ee6f4 100644 --- a/drivers/staging/rtl8187se/r8180_wx.c +++ b/drivers/staging/rtl8187se/r8180_wx.c @@ -13,7 +13,7 @@ Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver. - We want to tanks the Authors of those projects and the Ndiswrapper + We want to thanks the Authors of those projects and the Ndiswrapper project Authors. */ @@ -1181,7 +1181,7 @@ static iw_handler r8180_wx_handlers[] = { r8180_wx_set_wap, /* SIOCSIWAP */ r8180_wx_get_wap, /* SIOCGIWAP */ r8180_wx_set_mlme, /* SIOCSIWMLME*/ - dummy, /* SIOCGIWAPLIST -- depricated */ + dummy, /* SIOCGIWAPLIST -- deprecated */ r8180_wx_set_scan, /* SIOCSIWSCAN */ r8180_wx_get_scan, /* SIOCGIWSCAN */ r8180_wx_set_essid, /* SIOCSIWESSID */ @@ -1369,7 +1369,7 @@ static inline int is_same_network(struct ieee80211_network *src, (dst->capability & WLAN_CAPABILITY_BSS))); } -/* WB modefied to show signal to GUI on 18-01-2008 */ +/* WB modified to show signal to GUI on 18-01-2008 */ static struct iw_statistics *r8180_get_wireless_stats(struct net_device *dev) { struct r8180_priv *priv = ieee80211_priv(dev); diff --git a/drivers/staging/rtl8187se/r8180_wx.h b/drivers/staging/rtl8187se/r8180_wx.h index 735d03d..4081914 100644 --- a/drivers/staging/rtl8187se/r8180_wx.h +++ b/drivers/staging/rtl8187se/r8180_wx.h @@ -7,7 +7,7 @@ Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver - We want to tanks the Authors of such projects and the Ndiswrapper project Authors. + We want to thanks the Authors of such projects and the Ndiswrapper project Authors. */ /* this file (will) contains wireless extension handlers*/ diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c index af9be96..9144957 100644 --- a/drivers/staging/rtl8187se/r8185b_init.c +++ b/drivers/staging/rtl8187se/r8185b_init.c @@ -1008,7 +1008,7 @@ void ActUpdateChannelAccessSetting(struct net_device *dev, u8 u1bAIFS; u32 u4bAcParam; - /* Retrive paramters to udpate. */ + /* Retrieve paramters to update. */ eACI = pAcParam->f.AciAifsn.f.ACI; u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * ChnlAccessSetting->SlotTimeTimer + aSifsTime; u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit)) << AC_PARAM_TXOP_LIMIT_OFFSET) | @@ -1104,7 +1104,7 @@ void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode) return; } - /* 1. Assign wireless mode to swtich if necessary. */ + /* 1. Assign wireless mode to switch if necessary. */ if (btWirelessMode == WIRELESS_MODE_AUTO) { if ((btSupportedWirelessMode & WIRELESS_MODE_A)) { btWirelessMode = WIRELESS_MODE_A; @@ -1124,7 +1124,7 @@ void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode) * 2. Swtich band: RF or BB specific actions, * for example, refresh tables in omc8255, or change initial gain if necessary. * Nothing to do for Zebra to switch band. - * Update current wireless mode if we swtich to specified band successfully. + * Update current wireless mode if we switch to specified band successfully. */ ieee->mode = (WIRELESS_MODE)btWirelessMode; @@ -1242,7 +1242,7 @@ bool MgntDisconnect(struct net_device *dev, u8 asRsn) */ MgntDisconnectAP(dev, asRsn); } - /* Inidicate Disconnect, 2005.02.23, by rcnjko. */ + /* Indicate Disconnect, 2005.02.23, by rcnjko. */ } return true; } @@ -1416,7 +1416,7 @@ void IPSEnter(struct net_device *dev) * Do not enter IPS in the following conditions: * (1) RF is already OFF or Sleep * (2) bSwRfProcessing (indicates the IPS is still under going) - * (3) Connectted (only disconnected can trigger IPS) + * (3) Connected (only disconnected can trigger IPS) * (4) IBSS (send Beacon) * (5) AP mode (send Beacon) */ |