diff options
Diffstat (limited to 'arch/arm/boot/dts/exynos5250-arndale.dts')
| -rw-r--r-- | arch/arm/boot/dts/exynos5250-arndale.dts | 105 |
1 files changed, 92 insertions, 13 deletions
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index abc7272..452d0b0 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5250.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; @@ -37,6 +38,28 @@ s5m8767_pmic@66 { compatible = "samsung,s5m8767-pmic"; reg = <0x66>; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + vinb1-supply = <&main_dc_reg>; + vinb2-supply = <&main_dc_reg>; + vinb3-supply = <&main_dc_reg>; + vinb4-supply = <&main_dc_reg>; + vinb5-supply = <&main_dc_reg>; + vinb6-supply = <&main_dc_reg>; + vinb7-supply = <&main_dc_reg>; + vinb8-supply = <&main_dc_reg>; + vinb9-supply = <&main_dc_reg>; + + vinl1-supply = <&buck7_reg>; + vinl2-supply = <&buck7_reg>; + vinl3-supply = <&buck7_reg>; + vinl4-supply = <&main_dc_reg>; + vinl5-supply = <&main_dc_reg>; + vinl6-supply = <&main_dc_reg>; + vinl7-supply = <&main_dc_reg>; + vinl8-supply = <&buck8_reg>; + vinl9-supply = <&buck8_reg>; s5m8767,pmic-buck2-dvs-voltage = <1300000>; s5m8767,pmic-buck3-dvs-voltage = <1100000>; @@ -276,6 +299,16 @@ op_mode = <1>; }; + buck7_reg: BUCK7 { + regulator-name = "PVDD_BUCK7"; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "PVDD_BUCK8"; + regulator-always-on; + }; + buck9_reg: BUCK9 { regulator-name = "VDD_33_OFF_EXT1"; regulator-min-microvolt = <750000>; @@ -295,7 +328,22 @@ }; i2c@12C90000 { - status = "disabled"; + wm1811a@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + + AVDD2-supply = <&main_dc_reg>; + CPVDD-supply = <&main_dc_reg>; + DBVDD1-supply = <&main_dc_reg>; + DBVDD2-supply = <&main_dc_reg>; + DBVDD3-supply = <&main_dc_reg>; + LDO1VDD-supply = <&main_dc_reg>; + SPKVDD1-supply = <&main_dc_reg>; + SPKVDD2-supply = <&main_dc_reg>; + + wlf,ldo1ena = <&gpb0 0 0>; + wlf,ldo2ena = <&gpb0 1 0>; + }; }; i2c@12CA0000 { @@ -429,18 +477,29 @@ vdd-supply = <&ldo8_reg>; }; - mmc_reg: voltage-regulator { - compatible = "regulator-fixed"; - regulator-name = "VDD_33ON_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 1>; - enable-active-high; - }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; - reg_hdmi_en: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "hdmi-en"; + main_dc_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "MAIN_DC"; + }; + + mmc_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDD_33ON_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 1>; + enable-active-high; + }; + + reg_hdmi_en: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "hdmi-en"; + }; }; fixed-rate-clocks { @@ -450,16 +509,18 @@ }; }; - dp-controller { + dp-controller@145B0000 { samsung,color-space = <0>; samsung,dynamic-range = <0>; samsung,ycbcr-coeff = <0>; samsung,color-depth = <1>; samsung,link-rate = <0x0a>; samsung,lane-count = <4>; + status = "okay"; }; fimd: fimd@14400000 { + status = "okay"; display-timings { native-mode = <&timing0>; timing0: timing@0 { @@ -480,4 +541,22 @@ rtc { status = "okay"; }; + + usb_hub_bus { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + // SMSC USB3503 connected in hardware only mode as a PHY + usb_hub: usb_hub { + compatible = "smsc,usb3503a"; + + reset-gpios = <&gpx3 5 1>; + connect-gpios = <&gpd1 7 1>; + }; + }; + + usb@12110000 { + usb-phy = <&usb2_phy>; + }; }; |