1 files changed, 50 insertions, 47 deletions

diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 9126e3e..dbc8b8d 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -56,43 +56,42 @@
 
 #define H3_TS_GPIO	48
 
-static int h3_keymap[] = {
+static const unsigned int h3_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_F10),
-	KEY(0, 4, KEY_F5),
-	KEY(0, 5, KEY_9),
-	KEY(1, 0, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(2, 0, KEY_3),
+	KEY(3, 0, KEY_F10),
+	KEY(4, 0, KEY_F5),
+	KEY(5, 0, KEY_9),
+	KEY(0, 1, KEY_DOWN),
 	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_2),
-	KEY(1, 3, KEY_F9),
-	KEY(1, 4, KEY_F7),
-	KEY(1, 5, KEY_0),
-	KEY(2, 0, KEY_ENTER),
-	KEY(2, 1, KEY_6),
+	KEY(2, 1, KEY_2),
+	KEY(3, 1, KEY_F9),
+	KEY(4, 1, KEY_F7),
+	KEY(5, 1, KEY_0),
+	KEY(0, 2, KEY_ENTER),
+	KEY(1, 2, KEY_6),
 	KEY(2, 2, KEY_1),
-	KEY(2, 3, KEY_F2),
-	KEY(2, 4, KEY_F6),
-	KEY(2, 5, KEY_HOME),
-	KEY(3, 0, KEY_8),
-	KEY(3, 1, KEY_5),
-	KEY(3, 2, KEY_F12),
+	KEY(3, 2, KEY_F2),
+	KEY(4, 2, KEY_F6),
+	KEY(5, 2, KEY_HOME),
+	KEY(0, 3, KEY_8),
+	KEY(1, 3, KEY_5),
+	KEY(2, 3, KEY_F12),
 	KEY(3, 3, KEY_F3),
-	KEY(3, 4, KEY_F8),
-	KEY(3, 5, KEY_END),
-	KEY(4, 0, KEY_7),
-	KEY(4, 1, KEY_4),
-	KEY(4, 2, KEY_F11),
-	KEY(4, 3, KEY_F1),
+	KEY(4, 3, KEY_F8),
+	KEY(5, 3, KEY_END),
+	KEY(0, 4, KEY_7),
+	KEY(1, 4, KEY_4),
+	KEY(2, 4, KEY_F11),
+	KEY(3, 4, KEY_F1),
 	KEY(4, 4, KEY_F4),
-	KEY(4, 5, KEY_ESC),
-	KEY(5, 0, KEY_F13),
-	KEY(5, 1, KEY_F14),
-	KEY(5, 2, KEY_F15),
-	KEY(5, 3, KEY_F16),
-	KEY(5, 4, KEY_SLEEP),
-	0
+	KEY(5, 4, KEY_ESC),
+	KEY(0, 5, KEY_F13),
+	KEY(1, 5, KEY_F14),
+	KEY(2, 5, KEY_F15),
+	KEY(3, 5, KEY_F16),
+	KEY(4, 5, KEY_SLEEP),
 };
 
 
@@ -264,6 +263,15 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+static void __init h3_init_smc91x(void)
+{
+	omap_cfg_reg(W15_1710_GPIO40);
+	if (gpio_request(40, "SMC91x irq") < 0) {
+		printk("Error requesting gpio 40 for smc91x irq\n");
+		return;
+	}
+}
+
 #define GPTIMER_BASE		0xFFFB1400
 #define GPTIMER_REGS(x)	(0xFFFB1400 + (x * 0x800))
 #define GPTIMER_REGS_SIZE	0x46
@@ -296,14 +304,18 @@ static struct resource h3_kp_resources[] = {
 	},
 };
 
+static const struct matrix_keymap_data h3_keymap_data = {
+	.keymap		= h3_keymap,
+	.keymap_size	= ARRAY_SIZE(h3_keymap),
+};
+
 static struct omap_kp_platform_data h3_kp_data = {
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= h3_keymap,
-	.keymapsize	= ARRAY_SIZE(h3_keymap),
-	.rep		= 1,
+	.keymap_data	= &h3_keymap_data,
+	.rep		= true,
 	.delay		= 9,
-	.dbounce	= 1,
+	.dbounce	= true,
 };
 
 static struct platform_device h3_kp_device = {
@@ -376,6 +388,8 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
 
 static void __init h3_init(void)
 {
+	h3_init_smc91x();
+
 	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
 	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
 	 * notice whether a NAND chip is enabled at probe time.
@@ -422,21 +436,10 @@ static void __init h3_init(void)
 	h3_mmc_init();
 }
 
-static void __init h3_init_smc91x(void)
-{
-	omap_cfg_reg(W15_1710_GPIO40);
-	if (gpio_request(40, "SMC91x irq") < 0) {
-		printk("Error requesting gpio 40 for smc91x irq\n");
-		return;
-	}
-}
-
 static void __init h3_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
-	h3_init_smc91x();
 }
 
 static void __init h3_map_io(void)