diff options
Diffstat (limited to 'arch/arm/mach-omap1')
-rw-r--r-- | arch/arm/mach-omap1/Kconfig | 5 | ||||
-rw-r--r-- | arch/arm/mach-omap1/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-fsample.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-h3.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-innovator.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-perseus2.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap1/devices.c | 71 | ||||
-rw-r--r-- | arch/arm/mach-omap1/io.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap1/mailbox.c | 206 | ||||
-rw-r--r-- | arch/arm/mach-omap1/pm.c | 8 | ||||
-rw-r--r-- | arch/arm/mach-omap1/time.c | 206 |
11 files changed, 394 insertions, 115 deletions
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 8781aae..ab1b17d 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -22,6 +22,7 @@ comment "OMAP Board Type" config MACH_OMAP_INNOVATOR bool "TI Innovator" depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) + select OMAP_MCBSP help TI OMAP 1510 or 1610 Innovator board support. Say Y here if you have such a board. @@ -29,6 +30,7 @@ config MACH_OMAP_INNOVATOR config MACH_OMAP_H2 bool "TI H2 Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX + select OMAP_MCBSP help TI OMAP 1610/1611B H2 board support. Say Y here if you have such a board. @@ -36,6 +38,7 @@ config MACH_OMAP_H2 config MACH_OMAP_H3 bool "TI H3 Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX + select GPIOEXPANDER_OMAP help TI OMAP 1710 H3 board support. Say Y here if you have such a board. @@ -43,7 +46,7 @@ config MACH_OMAP_H3 config MACH_OMAP_OSK bool "TI OSK Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX - select TPS65010 + select OMAP_MCBSP help TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here if you have such a board. diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 7165f74..a8b9a00 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -37,4 +37,3 @@ led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o obj-$(CONFIG_LEDS) += $(led-y) - diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 62e42c7..f65baa9 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -246,7 +246,7 @@ static void __init fsample_init_smc91x(void) mdelay(50); } -void omap_fsample_init_irq(void) +static void __init omap_fsample_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 9d2346f..7b260b7 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -455,7 +455,7 @@ static void __init h3_init_smc91x(void) } } -void h3_init_irq(void) +static void __init h3_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index cb00530..7e63a41 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -308,7 +308,7 @@ static void __init innovator_init_smc91x(void) } } -void innovator_init_irq(void) +static void __init innovator_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index fa4be96..1d5c8d5 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -246,7 +246,7 @@ static void __init perseus2_init_smc91x(void) mdelay(50); } -void omap_perseus2_init_irq(void) +static void __init omap_perseus2_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 6dcd10a..da8a3ac 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -24,35 +24,6 @@ #include <asm/arch/mux.h> #include <asm/arch/gpio.h> -#if defined(CONFIG_OMAP1610_IR) || defined(CONFIG_OMAP161O_IR_MODULE) - -static u64 irda_dmamask = 0xffffffff; - -static struct platform_device omap1610ir_device = { - .name = "omap1610-ir", - .id = -1, - .dev = { - .dma_mask = &irda_dmamask, - }, -}; - -static void omap_init_irda(void) -{ - /* FIXME define and use a boot tag, members something like: - * u8 uart; // uart1, or uart3 - * ... but driver only handles uart3 for now - * s16 fir_sel; // gpio for SIR vs FIR - * ... may prefer a callback for SIR/MIR/FIR mode select; - * while h2 uses a GPIO, H3 uses a gpio expander - */ - if (machine_is_omap_h2() - || machine_is_omap_h3()) - (void) platform_device_register(&omap1610ir_device); -} -#else -static inline void omap_init_irda(void) {} -#endif - /*-------------------------------------------------------------------------*/ #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE) @@ -90,6 +61,45 @@ static void omap_init_rtc(void) static inline void omap_init_rtc(void) {} #endif +#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE) + +#if defined(CONFIG_ARCH_OMAP15XX) +# define OMAP1_MBOX_SIZE 0x23 +# define INT_DSP_MAILBOX1 INT_1510_DSP_MAILBOX1 +#elif defined(CONFIG_ARCH_OMAP16XX) +# define OMAP1_MBOX_SIZE 0x2f +# define INT_DSP_MAILBOX1 INT_1610_DSP_MAILBOX1 +#endif + +#define OMAP1_MBOX_BASE IO_ADDRESS(OMAP16XX_MAILBOX_BASE) + +static struct resource mbox_resources[] = { + { + .start = OMAP1_MBOX_BASE, + .end = OMAP1_MBOX_BASE + OMAP1_MBOX_SIZE, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_DSP_MAILBOX1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mbox_device = { + .name = "mailbox", + .id = -1, + .num_resources = ARRAY_SIZE(mbox_resources), + .resource = mbox_resources, +}; + +static inline void omap_init_mbox(void) +{ + platform_device_register(&mbox_device); +} +#else +static inline void omap_init_mbox(void) { } +#endif + #if defined(CONFIG_OMAP_STI) #define OMAP1_STI_BASE IO_ADDRESS(0xfffea000) @@ -154,7 +164,8 @@ static int __init omap1_init_devices(void) /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - omap_init_irda(); + + omap_init_mbox(); omap_init_rtc(); omap_init_sti(); diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index fab8b0b..81c4e73 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -17,11 +17,11 @@ #include <asm/io.h> #include <asm/arch/mux.h> #include <asm/arch/tc.h> -#include <asm/arch/omapfb.h> extern int omap1_clk_init(void); extern void omap_check_revision(void); extern void omap_sram_init(void); +extern void omapfb_reserve_sdram(void); /* * The machine specific code may provide the extra mapping besides the @@ -121,7 +121,7 @@ void __init omap1_map_common_io(void) #endif omap_sram_init(); - omapfb_reserve_mem(); + omapfb_reserve_sdram(); } /* diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c new file mode 100644 index 0000000..d3abf56 --- /dev/null +++ b/arch/arm/mach-omap1/mailbox.c @@ -0,0 +1,206 @@ +/* + * Mailbox reservation modules for DSP + * + * Copyright (C) 2006 Nokia Corporation + * Written by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/kernel.h> +#include <linux/resource.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <asm/arch/mailbox.h> +#include <asm/arch/irqs.h> +#include <asm/io.h> + +#define MAILBOX_ARM2DSP1 0x00 +#define MAILBOX_ARM2DSP1b 0x04 +#define MAILBOX_DSP2ARM1 0x08 +#define MAILBOX_DSP2ARM1b 0x0c +#define MAILBOX_DSP2ARM2 0x10 +#define MAILBOX_DSP2ARM2b 0x14 +#define MAILBOX_ARM2DSP1_Flag 0x18 +#define MAILBOX_DSP2ARM1_Flag 0x1c +#define MAILBOX_DSP2ARM2_Flag 0x20 + +unsigned long mbox_base; + +struct omap_mbox1_fifo { + unsigned long cmd; + unsigned long data; + unsigned long flag; +}; + +struct omap_mbox1_priv { + struct omap_mbox1_fifo tx_fifo; + struct omap_mbox1_fifo rx_fifo; +}; + +static inline int mbox_read_reg(unsigned int reg) +{ + return __raw_readw(mbox_base + reg); +} + +static inline void mbox_write_reg(unsigned int val, unsigned int reg) +{ + __raw_writew(val, mbox_base + reg); +} + +/* msg */ +static inline mbox_msg_t omap1_mbox_fifo_read(struct omap_mbox *mbox) +{ + struct omap_mbox1_fifo *fifo = + &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; + mbox_msg_t msg; + + msg = mbox_read_reg(fifo->data); + msg |= ((mbox_msg_t) mbox_read_reg(fifo->cmd)) << 16; + + return msg; +} + +static inline void +omap1_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg) +{ + struct omap_mbox1_fifo *fifo = + &((struct omap_mbox1_priv *)mbox->priv)->tx_fifo; + + mbox_write_reg(msg & 0xffff, fifo->data); + mbox_write_reg(msg >> 16, fifo->cmd); +} + +static inline int omap1_mbox_fifo_empty(struct omap_mbox *mbox) +{ + return 0; +} + +static inline int omap1_mbox_fifo_full(struct omap_mbox *mbox) +{ + struct omap_mbox1_fifo *fifo = + &((struct omap_mbox1_priv *)mbox->priv)->rx_fifo; + + return (mbox_read_reg(fifo->flag)); +} + +/* irq */ +static inline void +omap1_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) +{ + if (irq == IRQ_RX) + enable_irq(mbox->irq); +} + +static inline void +omap1_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) +{ + if (irq == IRQ_RX) + disable_irq(mbox->irq); +} + +static inline int +omap1_mbox_is_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) +{ + if (irq == IRQ_TX) + return 0; + return 1; +} + +static struct omap_mbox_ops omap1_mbox_ops = { + .type = OMAP_MBOX_TYPE1, + .fifo_read = omap1_mbox_fifo_read, + .fifo_write = omap1_mbox_fifo_write, + .fifo_empty = omap1_mbox_fifo_empty, + .fifo_full = omap1_mbox_fifo_full, + .enable_irq = omap1_mbox_enable_irq, + .disable_irq = omap1_mbox_disable_irq, + .is_irq = omap1_mbox_is_irq, +}; + +/* FIXME: the following struct should be created automatically by the user id */ + +/* DSP */ +static struct omap_mbox1_priv omap1_mbox_dsp_priv = { + .tx_fifo = { + .cmd = MAILBOX_ARM2DSP1b, + .data = MAILBOX_ARM2DSP1, + .flag = MAILBOX_ARM2DSP1_Flag, + }, + .rx_fifo = { + .cmd = MAILBOX_DSP2ARM1b, + .data = MAILBOX_DSP2ARM1, + .flag = MAILBOX_DSP2ARM1_Flag, + }, +}; + +struct omap_mbox mbox_dsp_info = { + .name = "dsp", + .ops = &omap1_mbox_ops, + .priv = &omap1_mbox_dsp_priv, +}; +EXPORT_SYMBOL(mbox_dsp_info); + +static int __init omap1_mbox_probe(struct platform_device *pdev) +{ + struct resource *res; + int ret = 0; + + if (pdev->num_resources != 2) { + dev_err(&pdev->dev, "invalid number of resources: %d\n", + pdev->num_resources); + return -ENODEV; + } + + /* MBOX base */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!res)) { + dev_err(&pdev->dev, "invalid mem resource\n"); + return -ENODEV; + } + mbox_base = res->start; + + /* DSP IRQ */ + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (unlikely(!res)) { + dev_err(&pdev->dev, "invalid irq resource\n"); + return -ENODEV; + } + mbox_dsp_info.irq = res->start; + + ret = omap_mbox_register(&mbox_dsp_info); + + return ret; +} + +static int omap1_mbox_remove(struct platform_device *pdev) +{ + omap_mbox_unregister(&mbox_dsp_info); + + return 0; +} + +static struct platform_driver omap1_mbox_driver = { + .probe = omap1_mbox_probe, + .remove = omap1_mbox_remove, + .driver = { + .name = "mailbox", + }, +}; + +static int __init omap1_mbox_init(void) +{ + return platform_driver_register(&omap1_mbox_driver); +} + +static void __exit omap1_mbox_exit(void) +{ + platform_driver_unregister(&omap1_mbox_driver); +} + +module_init(omap1_mbox_init); +module_exit(omap1_mbox_exit); + +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 49efe90..6f4ea4b 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -72,12 +72,12 @@ static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; static unsigned short enable_dyn_sleep = 1; -static ssize_t omap_pm_sleep_while_idle_show(struct subsystem * subsys, char *buf) +static ssize_t omap_pm_sleep_while_idle_show(struct kset *kset, char *buf) { return sprintf(buf, "%hu\n", enable_dyn_sleep); } -static ssize_t omap_pm_sleep_while_idle_store(struct subsystem * subsys, +static ssize_t omap_pm_sleep_while_idle_store(struct kset *kset, const char * buf, size_t n) { @@ -100,7 +100,7 @@ static struct subsys_attribute sleep_while_idle_attr = { .store = omap_pm_sleep_while_idle_store, }; -extern struct subsystem power_subsys; +extern struct kset power_subsys; static void (*omap_sram_idle)(void) = NULL; static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL; @@ -698,10 +698,10 @@ static struct irqaction omap_wakeup_irq = { static struct pm_ops omap_pm_ops ={ - .pm_disk_mode = 0, .prepare = omap_pm_prepare, .enter = omap_pm_enter, .finish = omap_pm_finish, + .valid = pm_valid_only_mem, }; static int __init omap_pm_init(void) diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 1b7e4a5..85e048b 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -39,6 +39,10 @@ #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/spinlock.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> #include <asm/system.h> #include <asm/hardware.h> @@ -48,13 +52,7 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> -struct sys_timer omap_timer; -/* - * --------------------------------------------------------------------------- - * MPU timer - * --------------------------------------------------------------------------- - */ #define OMAP_MPU_TIMER_BASE OMAP_MPU_TIMER1_BASE #define OMAP_MPU_TIMER_OFFSET 0x100 @@ -88,21 +86,6 @@ static inline unsigned long long cycles_2_ns(unsigned long long cyc) return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; } -/* - * MPU_TICKS_PER_SEC must be an even number, otherwise machinecycles_to_usecs - * will break. On P2, the timer count rate is 6.5 MHz after programming PTV - * with 0. This divides the 13MHz input by 2, and is undocumented. - */ -#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) -/* REVISIT: This ifdef construct should be replaced by a query to clock - * framework to see if timer base frequency is 12.0, 13.0 or 19.2 MHz. - */ -#define MPU_TICKS_PER_SEC (13000000 / 2) -#else -#define MPU_TICKS_PER_SEC (12000000 / 2) -#endif - -#define MPU_TIMER_TICK_PERIOD ((MPU_TICKS_PER_SEC / HZ) - 1) typedef struct { u32 cntl; /* CNTL_TIMER, R/W */ @@ -120,98 +103,164 @@ static inline unsigned long omap_mpu_timer_read(int nr) return timer->read_tim; } -static inline void omap_mpu_timer_start(int nr, unsigned long load_val) +static inline void omap_mpu_set_autoreset(int nr) { volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr); - timer->cntl = MPU_TIMER_CLOCK_ENABLE; - udelay(1); - timer->load_tim = load_val; - udelay(1); - timer->cntl = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_AR | MPU_TIMER_ST); + timer->cntl = timer->cntl | MPU_TIMER_AR; } -unsigned long omap_mpu_timer_ticks_to_usecs(unsigned long nr_ticks) +static inline void omap_mpu_remove_autoreset(int nr) { - unsigned long long nsec; + volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr); - nsec = cycles_2_ns((unsigned long long)nr_ticks); - return (unsigned long)nsec / 1000; + timer->cntl = timer->cntl & ~MPU_TIMER_AR; } -/* - * Last processed system timer interrupt - */ -static unsigned long omap_mpu_timer_last = 0; +static inline void omap_mpu_timer_start(int nr, unsigned long load_val, + int autoreset) +{ + volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr); + unsigned int timerflags = (MPU_TIMER_CLOCK_ENABLE | MPU_TIMER_ST); + + if (autoreset) timerflags |= MPU_TIMER_AR; + + timer->cntl = MPU_TIMER_CLOCK_ENABLE; + udelay(1); + timer->load_tim = load_val; + udelay(1); + timer->cntl = timerflags; +} /* - * Returns elapsed usecs since last system timer interrupt + * --------------------------------------------------------------------------- + * MPU timer 1 ... count down to zero, interrupt, reload + * --------------------------------------------------------------------------- */ -static unsigned long omap_mpu_timer_gettimeoffset(void) +static int omap_mpu_set_next_event(unsigned long cycles, + struct clock_event_device *evt) { - unsigned long now = 0 - omap_mpu_timer_read(0); - unsigned long elapsed = now - omap_mpu_timer_last; + omap_mpu_timer_start(0, cycles, 0); + return 0; +} - return omap_mpu_timer_ticks_to_usecs(elapsed); +static void omap_mpu_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + omap_mpu_set_autoreset(0); + break; + case CLOCK_EVT_MODE_ONESHOT: + omap_mpu_remove_autoreset(0); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + break; + } } -/* - * Elapsed time between interrupts is calculated using timer0. - * Latency during the interrupt is calculated using timer1. - * Both timer0 and timer1 are counting at 6MHz (P2 6.5MHz). - */ -static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id) +static struct clock_event_device clockevent_mpu_timer1 = { + .name = "mpu_timer1", + .features = CLOCK_EVT_FEAT_PERIODIC, CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_next_event = omap_mpu_set_next_event, + .set_mode = omap_mpu_set_mode, +}; + +static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id) { - unsigned long now, latency; + struct clock_event_device *evt = &clockevent_mpu_timer1; - write_seqlock(&xtime_lock); - now = 0 - omap_mpu_timer_read(0); - latency = MPU_TICKS_PER_SEC / HZ - omap_mpu_timer_read(1); - omap_mpu_timer_last = now - latency; - timer_tick(); - write_sequnlock(&xtime_lock); + evt->event_handler(evt); return IRQ_HANDLED; } -static struct irqaction omap_mpu_timer_irq = { - .name = "mpu timer", +static struct irqaction omap_mpu_timer1_irq = { + .name = "mpu_timer1", .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = omap_mpu_timer_interrupt, + .handler = omap_mpu_timer1_interrupt, }; -static unsigned long omap_mpu_timer1_overflows; -static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id) +static __init void omap_init_mpu_timer(unsigned long rate) +{ + set_cyc2ns_scale(rate / 1000); + + setup_irq(INT_TIMER1, &omap_mpu_timer1_irq); + omap_mpu_timer_start(0, (rate / HZ) - 1, 1); + + clockevent_mpu_timer1.mult = div_sc(rate, NSEC_PER_SEC, + clockevent_mpu_timer1.shift); + clockevent_mpu_timer1.max_delta_ns = + clockevent_delta2ns(-1, &clockevent_mpu_timer1); + clockevent_mpu_timer1.min_delta_ns = + clockevent_delta2ns(1, &clockevent_mpu_timer1); + + clockevent_mpu_timer1.cpumask = cpumask_of_cpu(0); + clockevents_register_device(&clockevent_mpu_timer1); +} + + +/* + * --------------------------------------------------------------------------- + * MPU timer 2 ... free running 32-bit clock source and scheduler clock + * --------------------------------------------------------------------------- + */ + +static unsigned long omap_mpu_timer2_overflows; + +static irqreturn_t omap_mpu_timer2_interrupt(int irq, void *dev_id) { - omap_mpu_timer1_overflows++; + omap_mpu_timer2_overflows++; return IRQ_HANDLED; } -static struct irqaction omap_mpu_timer1_irq = { - .name = "mpu timer1 overflow", +static struct irqaction omap_mpu_timer2_irq = { + .name = "mpu_timer2", .flags = IRQF_DISABLED, - .handler = omap_mpu_timer1_interrupt, + .handler = omap_mpu_timer2_interrupt, }; -static __init void omap_init_mpu_timer(void) +static cycle_t mpu_read(void) { - set_cyc2ns_scale(MPU_TICKS_PER_SEC / 1000); - omap_timer.offset = omap_mpu_timer_gettimeoffset; - setup_irq(INT_TIMER1, &omap_mpu_timer1_irq); - setup_irq(INT_TIMER2, &omap_mpu_timer_irq); - omap_mpu_timer_start(0, 0xffffffff); - omap_mpu_timer_start(1, MPU_TIMER_TICK_PERIOD); + return ~omap_mpu_timer_read(1); +} + +static struct clocksource clocksource_mpu = { + .name = "mpu_timer2", + .rating = 300, + .read = mpu_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 24, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void __init omap_init_clocksource(unsigned long rate) +{ + static char err[] __initdata = KERN_ERR + "%s: can't register clocksource!\n"; + + clocksource_mpu.mult + = clocksource_khz2mult(rate/1000, clocksource_mpu.shift); + + setup_irq(INT_TIMER2, &omap_mpu_timer2_irq); + omap_mpu_timer_start(1, ~0, 1); + + if (clocksource_register(&clocksource_mpu)) + printk(err, clocksource_mpu.name); } + /* * Scheduler clock - returns current time in nanosec units. */ unsigned long long sched_clock(void) { - unsigned long ticks = 0 - omap_mpu_timer_read(0); + unsigned long ticks = 0 - omap_mpu_timer_read(1); unsigned long long ticks64; - ticks64 = omap_mpu_timer1_overflows; + ticks64 = omap_mpu_timer2_overflows; ticks64 <<= 32; ticks64 |= ticks; @@ -225,10 +274,21 @@ unsigned long long sched_clock(void) */ static void __init omap_timer_init(void) { - omap_init_mpu_timer(); + struct clk *ck_ref = clk_get(NULL, "ck_ref"); + unsigned long rate; + + BUG_ON(IS_ERR(ck_ref)); + + rate = clk_get_rate(ck_ref); + clk_put(ck_ref); + + /* PTV = 0 */ + rate /= 2; + + omap_init_mpu_timer(rate); + omap_init_clocksource(rate); } struct sys_timer omap_timer = { .init = omap_timer_init, - .offset = NULL, /* Initialized later */ }; |