summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig74
-rw-r--r--arch/arm/Makefile2
-rw-r--r--arch/arm/configs/s5pc100_defconfig892
-rw-r--r--arch/arm/kernel/irq.c2
-rw-r--r--arch/arm/mach-s3c2410/Kconfig18
-rw-r--r--arch/arm/mach-s3c2410/Makefile2
-rw-r--r--arch/arm/mach-s3c2410/cpu-freq.c159
-rw-r--r--arch/arm/mach-s3c2410/dma.c11
-rw-r--r--arch/arm/mach-s3c2410/include/mach/gpio-core.h2
-rw-r--r--arch/arm/mach-s3c2410/include/mach/irqs.h6
-rw-r--r--arch/arm/mach-s3c2410/include/mach/map.h8
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-gpio.h4
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-mem.h10
-rw-r--r--arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h23
-rw-r--r--arch/arm/mach-s3c2410/include/mach/spi.h3
-rw-r--r--arch/arm/mach-s3c2410/irq.c15
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c41
-rw-r--r--arch/arm/mach-s3c2410/pll.c95
-rw-r--r--arch/arm/mach-s3c2410/pm.c12
-rw-r--r--arch/arm/mach-s3c2410/s3c2410.c29
-rw-r--r--arch/arm/mach-s3c2412/Kconfig9
-rw-r--r--arch/arm/mach-s3c2412/Makefile1
-rw-r--r--arch/arm/mach-s3c2412/cpu-freq.c257
-rw-r--r--arch/arm/mach-s3c2412/s3c2412.c12
-rw-r--r--arch/arm/mach-s3c2440/Kconfig7
-rw-r--r--arch/arm/mach-s3c2440/mach-osiris.c9
-rw-r--r--arch/arm/mach-s3c24a0/include/mach/map.h1
-rw-r--r--arch/arm/mach-s3c6400/include/mach/map.h8
-rw-r--r--arch/arm/mach-s3c6400/s3c6400.c2
-rw-r--r--arch/arm/mach-s3c6410/Kconfig10
-rw-r--r--arch/arm/mach-s3c6410/Makefile3
-rw-r--r--arch/arm/mach-s3c6410/cpu.c2
-rw-r--r--arch/arm/mach-s3c6410/mach-hmt.c276
-rw-r--r--arch/arm/mach-s3c6410/mach-ncp.c2
-rw-r--r--arch/arm/mach-s3c6410/mach-smdk6410.c26
-rw-r--r--arch/arm/mach-s5pc100/Kconfig22
-rw-r--r--arch/arm/mach-s5pc100/Makefile17
-rw-r--r--arch/arm/mach-s5pc100/Makefile.boot2
-rw-r--r--arch/arm/mach-s5pc100/cpu.c97
-rw-r--r--arch/arm/mach-s5pc100/include/mach/debug-macro.S38
-rw-r--r--arch/arm/mach-s5pc100/include/mach/entry-macro.S50
-rw-r--r--arch/arm/mach-s5pc100/include/mach/gpio-core.h21
-rw-r--r--arch/arm/mach-s5pc100/include/mach/gpio.h146
-rw-r--r--arch/arm/mach-s5pc100/include/mach/hardware.h14
-rw-r--r--arch/arm/mach-s5pc100/include/mach/irqs.h14
-rw-r--r--arch/arm/mach-s5pc100/include/mach/map.h75
-rw-r--r--arch/arm/mach-s5pc100/include/mach/memory.h18
-rw-r--r--arch/arm/mach-s5pc100/include/mach/pwm-clock.h56
-rw-r--r--arch/arm/mach-s5pc100/include/mach/regs-irq.h24
-rw-r--r--arch/arm/mach-s5pc100/include/mach/system.h24
-rw-r--r--arch/arm/mach-s5pc100/include/mach/tick.h29
-rw-r--r--arch/arm/mach-s5pc100/include/mach/uncompress.h28
-rw-r--r--arch/arm/mach-s5pc100/mach-smdkc100.c103
-rw-r--r--arch/arm/plat-s3c/Kconfig5
-rw-r--r--arch/arm/plat-s3c/Makefile6
-rw-r--r--arch/arm/plat-s3c/dev-nand.c30
-rw-r--r--arch/arm/plat-s3c/include/plat/adc.h8
-rw-r--r--arch/arm/plat-s3c/include/plat/cpu-freq.h87
-rw-r--r--arch/arm/plat-s3c/include/plat/cpu.h1
-rw-r--r--arch/arm/plat-s3c/include/plat/devs.h3
-rw-r--r--arch/arm/plat-s3c/include/plat/hwmon.h41
-rw-r--r--arch/arm/plat-s3c/include/plat/map-base.h8
-rw-r--r--arch/arm/plat-s3c/pwm.c (renamed from arch/arm/plat-s3c24xx/pwm.c)5
-rw-r--r--arch/arm/plat-s3c24xx/Kconfig66
-rw-r--r--arch/arm/plat-s3c24xx/Makefile12
-rw-r--r--arch/arm/plat-s3c24xx/adc.c64
-rw-r--r--arch/arm/plat-s3c24xx/cpu-freq-debugfs.c199
-rw-r--r--arch/arm/plat-s3c24xx/cpu-freq.c716
-rw-r--r--arch/arm/plat-s3c24xx/cpu.c2
-rw-r--r--arch/arm/plat-s3c24xx/devs.c71
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h282
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/fiq.h13
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/s3c2410.h1
-rw-r--r--arch/arm/plat-s3c24xx/irq.c36
-rw-r--r--arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c64
-rw-r--r--arch/arm/plat-s3c24xx/s3c2410-iotiming.c477
-rw-r--r--arch/arm/plat-s3c24xx/s3c2412-iotiming.c285
-rw-r--r--arch/arm/plat-s3c24xx/s3c2440-cpufreq.c311
-rw-r--r--arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c97
-rw-r--r--arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c127
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c38
-rw-r--r--arch/arm/plat-s3c64xx/Kconfig1
-rw-r--r--arch/arm/plat-s3c64xx/Makefile3
-rw-r--r--arch/arm/plat-s3c64xx/dev-audio.c (renamed from arch/arm/plat-s3c/dev-audio.c)0
-rw-r--r--arch/arm/plat-s3c64xx/s3c6400-clock.c4
-rw-r--r--arch/arm/plat-s5pc1xx/Kconfig50
-rw-r--r--arch/arm/plat-s5pc1xx/Makefile26
-rw-r--r--arch/arm/plat-s5pc1xx/cpu.c112
-rw-r--r--arch/arm/plat-s5pc1xx/dev-uart.c174
-rw-r--r--arch/arm/plat-s5pc1xx/include/plat/irqs.h182
-rw-r--r--arch/arm/plat-s5pc1xx/include/plat/pll.h38
-rw-r--r--arch/arm/plat-s5pc1xx/include/plat/regs-clock.h421
-rw-r--r--arch/arm/plat-s5pc1xx/include/plat/s5pc100.h65
-rw-r--r--arch/arm/plat-s5pc1xx/irq.c259
-rw-r--r--arch/arm/plat-s5pc1xx/s5pc100-clock.c1139
-rw-r--r--arch/arm/plat-s5pc1xx/s5pc100-init.c27
-rw-r--r--arch/arm/plat-s5pc1xx/setup-i2c0.c25
-rw-r--r--arch/arm/plat-s5pc1xx/setup-i2c1.c25
98 files changed, 8339 insertions, 78 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9746667..5f6d977 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -122,6 +122,13 @@ config ARCH_HAS_ILOG2_U32
config ARCH_HAS_ILOG2_U64
bool
+config ARCH_HAS_CPUFREQ
+ bool
+ help
+ Internal node to signify that the ARCH has CPUFREQ support
+ and that the relevant menu configurations are displayed for
+ it.
+
config GENERIC_HWEIGHT
bool
default y
@@ -206,6 +213,7 @@ config ARCH_AAEC2000
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
+ select ARCH_HAS_CPUFREQ
select HAVE_CLK
select COMMON_CLKDEV
select ICST525
@@ -512,6 +520,7 @@ config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
depends on MMU
select ARCH_MTD_XIP
+ select ARCH_HAS_CPUFREQ
select GENERIC_GPIO
select HAVE_CLK
select COMMON_CLKDEV
@@ -554,6 +563,7 @@ config ARCH_SA1100
select ISA
select ARCH_SPARSEMEM_ENABLE
select ARCH_MTD_XIP
+ select ARCH_HAS_CPUFREQ
select GENERIC_GPIO
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
@@ -566,6 +576,7 @@ config ARCH_SA1100
config ARCH_S3C2410
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
select GENERIC_GPIO
+ select ARCH_HAS_CPUFREQ
select HAVE_CLK
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
@@ -576,9 +587,18 @@ config ARCH_S3C64XX
bool "Samsung S3C64XX"
select GENERIC_GPIO
select HAVE_CLK
+ select ARCH_HAS_CPUFREQ
help
Samsung S3C64XX series based systems
+config ARCH_S5PC1XX
+ bool "Samsung S5PC1XX"
+ select GENERIC_GPIO
+ select HAVE_CLK
+ select CPU_V7
+ help
+ Samsung S5PC1XX series based systems
+
config ARCH_SHARK
bool "Shark"
select CPU_SA110
@@ -635,6 +655,7 @@ config ARCH_OMAP
select GENERIC_GPIO
select HAVE_CLK
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_HAS_CPUFREQ
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
@@ -688,6 +709,7 @@ source "arch/arm/mach-kirkwood/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c64xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5pc1xx/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
@@ -705,6 +727,10 @@ endif
source "arch/arm/plat-stmp3xxx/Kconfig"
+if ARCH_S5PC1XX
+source "arch/arm/mach-s5pc100/Kconfig"
+endif
+
source "arch/arm/mach-lh7a40x/Kconfig"
source "arch/arm/mach-h720x/Kconfig"
@@ -1248,7 +1274,7 @@ endmenu
menu "CPU Power Management"
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)
+if ARCH_HAS_CPUFREQ
source "drivers/cpufreq/Kconfig"
@@ -1283,6 +1309,52 @@ config CPU_FREQ_S3C64XX
bool "CPUfreq support for Samsung S3C64XX CPUs"
depends on CPU_FREQ && CPU_S3C6410
+config CPU_FREQ_S3C
+ bool
+ help
+ Internal configuration node for common cpufreq on Samsung SoC
+
+config CPU_FREQ_S3C24XX
+ bool "CPUfreq driver for Samsung S3C24XX series CPUs"
+ depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+ select CPU_FREQ_S3C
+ help
+ This enables the CPUfreq driver for the Samsung S3C24XX family
+ of CPUs.
+
+ For details, take a look at <file:Documentation/cpu-freq>.
+
+ If in doubt, say N.
+
+config CPU_FREQ_S3C24XX_PLL
+ bool "Support CPUfreq changing of PLL frequency"
+ depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
+ help
+ Compile in support for changing the PLL frequency from the
+ S3C24XX series CPUfreq driver. The PLL takes time to settle
+ after a frequency change, so by default it is not enabled.
+
+ This also means that the PLL tables for the selected CPU(s) will
+ be built which may increase the size of the kernel image.
+
+config CPU_FREQ_S3C24XX_DEBUG
+ bool "Debug CPUfreq Samsung driver core"
+ depends on CPU_FREQ_S3C24XX
+ help
+ Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_IODEBUG
+ bool "Debug CPUfreq Samsung driver IO timing"
+ depends on CPU_FREQ_S3C24XX
+ help
+ Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_DEBUGFS
+ bool "Export debugfs for CPUFreq"
+ depends on CPU_FREQ_S3C24XX && DEBUG_FS
+ help
+ Export status information via debugfs.
+
endif
source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 8f117ac..3de196e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -158,6 +158,7 @@ machine-$(CONFIG_ARCH_RPC) := rpc
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_STMP378X) := stmp378x
@@ -177,6 +178,7 @@ plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c
+plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c
plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
new file mode 100644
index 0000000..b0d7d3d
--- /dev/null
+++ b/arch/arm/configs/s5pc100_defconfig
@@ -0,0 +1,892 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jul 1 15:53:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+CONFIG_ARCH_S5PC1XX=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_PLAT_S5PC1XX=y
+CONFIG_CPU_S5PC100_INIT=y
+CONFIG_CPU_S5PC100_CLOCK=y
+CONFIG_S5PC100_SETUP_I2C0=y
+CONFIG_CPU_S5PC100=y
+CONFIG_MACH_SMDKC100=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+CONFIG_DEBUG_S3C_PORT=y
+CONFIG_DEBUG_S3C_UART=0
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index b7c3490..c9a8619 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -86,7 +86,7 @@ int show_interrupts(struct seq_file *p, void *v)
unlock:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
} else if (i == NR_IRQS) {
-#ifdef CONFIG_ARCH_ACORN
+#ifdef CONFIG_FIQ
show_fiq_list(p, v);
#endif
#ifdef CONFIG_SMP
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 41bb65d..d8c023d 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -12,6 +12,7 @@ config CPU_S3C2410
select S3C2410_GPIO
select CPU_LLSERIAL_S3C2410
select S3C2410_PM if PM
+ select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
@@ -45,6 +46,22 @@ config MACH_BAST_IDE
Internal node for machines with an BAST style IDE
interface
+# cpu frequency scaling support
+
+config S3C2410_CPUFREQ
+ bool
+ depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+ select S3C2410_CPUFREQ_UTILS
+ help
+ CPU Frequency scaling support for S3C2410
+
+config S3C2410_PLLTABLE
+ bool
+ depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+ default y
+ help
+ Select the PLL table for the S3C2410
+
menu "S3C2410 Machines"
config ARCH_SMDK2410
@@ -79,6 +96,7 @@ config MACH_N30
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
select CPU_S3C2410
+ select S3C2410_IOTIMING if S3C2410_CPUFREQ
select PM_SIMTEC if PM
select SIMTEC_NOR
select MACH_BAST_IDE
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index fca02f8..2ab5ba4 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -15,6 +15,8 @@ obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
obj-$(CONFIG_S3C2410_GPIO) += gpio.o
+obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o
+obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
# Machine support
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
new file mode 100644
index 0000000..9d11868
--- /dev/null
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -0,0 +1,159 @@
+/* linux/arch/arm/mach-s3c2410/cpu-freq.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
+
+static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+ u32 clkdiv = 0;
+
+ if (cfg->divs.h_divisor == 2)
+ clkdiv |= S3C2410_CLKDIVN_HDIVN;
+
+ if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+ clkdiv |= S3C2410_CLKDIVN_PDIVN;
+
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long hclk, fclk, pclk;
+ unsigned int hdiv, pdiv;
+ unsigned long hclk_max;
+
+ fclk = cfg->freq.fclk;
+ hclk_max = cfg->max.hclk;
+
+ cfg->freq.armclk = fclk;
+
+ s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
+ __func__, fclk, hclk_max);
+
+ hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
+ hclk = fclk / hdiv;
+
+ if (hclk > cfg->max.hclk) {
+ s3c_freq_dbg("%s: hclk too big\n", __func__);
+ return -EINVAL;
+ }
+
+ pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+ pclk = hclk / pdiv;
+
+ if (pclk > cfg->max.pclk) {
+ s3c_freq_dbg("%s: pclk too big\n", __func__);
+ return -EINVAL;
+ }
+
+ pdiv *= hdiv;
+
+ /* record the result */
+ cfg->divs.p_divisor = pdiv;
+ cfg->divs.h_divisor = hdiv;
+
+ return 0 ;
+}
+
+static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
+ .max = {
+ .fclk = 200000000,
+ .hclk = 100000000,
+ .pclk = 50000000,
+ },
+
+ /* transition latency is about 5ms worst-case, so
+ * set 10ms to be sure */
+ .latency = 10000000,
+
+ .locktime_m = 150,
+ .locktime_u = 150,
+ .locktime_bits = 12,
+
+ .need_pll = 1,
+
+ .name = "s3c2410",
+ .calc_iotiming = s3c2410_iotiming_calc,
+ .set_iotiming = s3c2410_iotiming_set,
+ .get_iotiming = s3c2410_iotiming_get,
+ .resume_clocks = s3c2410_setup_clocks,
+
+ .set_fvco = s3c2410_set_fvco,
+ .set_refresh = s3c2410_cpufreq_setrefresh,
+ .set_divs = s3c2410_cpufreq_setdivs,
+ .calc_divs = s3c2410_cpufreq_calcdivs,
+
+ .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2410_cpufreq_add(struct sys_device *sysdev)
+{
+ return s3c_cpufreq_register(&s3c2410_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2410_cpufreq_driver = {
+ .add = s3c2410_cpufreq_add,
+};
+
+static int __init s3c2410_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2410_sysclass,
+ &s3c2410_cpufreq_driver);
+}
+
+arch_initcall(s3c2410_cpufreq_init);
+
+static int s3c2410a_cpufreq_add(struct sys_device *sysdev)
+{
+ /* alter the maximum freq settings for S3C2410A. If a board knows
+ * it only has a maximum of 200, then it should register its own
+ * limits. */
+
+ s3c2410_cpufreq_info.max.fclk = 266000000;
+ s3c2410_cpufreq_info.max.hclk = 133000000;
+ s3c2410_cpufreq_info.max.pclk = 66500000;
+ s3c2410_cpufreq_info.name = "s3c2410a";
+
+ return s3c2410_cpufreq_add(sysdev);
+}
+
+static struct sysdev_driver s3c2410a_cpufreq_driver = {
+ .add = s3c2410a_cpufreq_add,
+};
+
+static int __init s3c2410a_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2410a_sysclass,
+ &s3c2410a_cpufreq_driver);
+}
+
+arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index dbf96e6..63b753f 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -164,6 +164,17 @@ static int __init s3c2410_dma_drvinit(void)
}
arch_initcall(s3c2410_dma_drvinit);
+
+static struct sysdev_driver s3c2410a_dma_driver = {
+ .add = s3c2410_dma_add,
+};
+
+static int __init s3c2410a_dma_drvinit(void)
+{
+ return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_dma_driver);
+}
+
+arch_initcall(s3c2410a_dma_drvinit);
#endif
#if defined(CONFIG_CPU_S3C2442)
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
index 8fe1920..f8b879a 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h
@@ -28,7 +28,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
return NULL;
chip = &s3c24xx_gpios[pin/32];
- return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL;
+ return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL;
}
#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 2a2384f..6c12c63 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -164,6 +164,12 @@
#define IRQ_S3CUART_TX3 IRQ_S3C2443_TX3
#define IRQ_S3CUART_ERR3 IRQ_S3C2443_ERR3
+#ifdef CONFIG_CPU_S3C2440
+#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
+#else
+#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
+#endif
+
/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
#define FIQ_START IRQ_EINT0
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index e99b212..b049e61 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -67,6 +67,13 @@
#define S3C2443_PA_HSMMC (0x4A800000)
#define S3C2443_SZ_HSMMC (256)
+/* S3C2412 memory and IO controls */
+#define S3C2412_PA_SSMC (0x4F000000)
+#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
+
+#define S3C2412_PA_EBI (0x48800000)
+#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
+
/* physical addresses of all the chip-select areas */
#define S3C2410_CS0 (0x00000000)
@@ -103,5 +110,6 @@
#define S3C_PA_UART S3C24XX_PA_UART
#define S3C_PA_USBHOST S3C2410_PA_USBHOST
#define S3C_PA_HSMMC0 S3C2443_PA_HSMMC
+#define S3C_PA_NAND S3C24XX_PA_NAND
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index b278d0c..f6e8eec 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -328,13 +328,15 @@
#define S3C2410_GPD8_VD16 (0x02 << 16)
#define S3C2400_GPD8_TOUT3 (0x02 << 16)
+#define S3C2440_GPD8_SPIMISO1 (0x03 << 16)
#define S3C2410_GPD9_VD17 (0x02 << 18)
#define S3C2400_GPD9_TCLK0 (0x02 << 18)
-#define S3C2410_GPD9_MASK (0x03 << 18)
+#define S3C2440_GPD9_SPIMOSI1 (0x03 << 18)
#define S3C2410_GPD10_VD18 (0x02 << 20)
#define S3C2400_GPD10_nWAIT (0x02 << 20)
+#define S3C2440_GPD10_SPICLK1 (0x03 << 20)
#define S3C2410_GPD11_VD19 (0x02 << 22)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
index 5775980..7f7c529 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -73,6 +73,16 @@
#define S3C2410_BWSCON_WS7 (1<<30)
#define S3C2410_BWSCON_ST7 (1<<31)
+/* accesor functions for getting BANK(n) configuration. (n != 0) */
+
+#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
+
+#define S3C2410_BWSCON_DW8 (0)
+#define S3C2410_BWSCON_DW16 (1)
+#define S3C2410_BWSCON_DW32 (2)
+#define S3C2410_BWSCON_WS (1 << 2)
+#define S3C2410_BWSCON_ST (1 << 3)
+
/* memory set (rom, ram) */
#define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004)
#define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
index a4bf271..fb63525 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
@@ -14,9 +14,11 @@
#ifndef __ASM_ARM_REGS_S3C2412_MEM
#define __ASM_ARM_REGS_S3C2412_MEM
-#ifndef S3C2412_MEMREG
#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
+#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
#define S3C2412_BANKCFG S3C2412_MEMREG(0x00)
#define S3C2412_BANKCON1 S3C2412_MEMREG(0x04)
@@ -26,4 +28,21 @@
#define S3C2412_REFRESH S3C2412_MEMREG(0x10)
#define S3C2412_TIMEOUT S3C2412_MEMREG(0x14)
+/* EBI control registers */
+
+#define S3C2412_EBI_PR S3C2412_EBIREG(0x00)
+#define S3C2412_EBI_BANKCFG S3C2412_EBIREG(0x04)
+
+/* SSMC control registers */
+
+#define S3C2412_SSMC_BANK(x) S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMIDCYR(x) S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMBWSTRD(x) S3C2412_SSMC(x, 0x04)
+#define S3C2412_SMBWSTWRR(x) S3C2412_SSMC(x, 0x08)
+#define S3C2412_SMBWSTOENR(x) S3C2412_SSMC(x, 0x0C)
+#define S3C2412_SMBWSTWENR(x) S3C2412_SSMC(x, 0x10)
+#define S3C2412_SMBCR(x) S3C2412_SSMC(x, 0x14)
+#define S3C2412_SMBSR(x) S3C2412_SSMC(x, 0x18)
+#define S3C2412_SMBWSTBRDR(x) S3C2412_SSMC(x, 0x1C)
+
#endif /* __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 1d300fb..193b39d 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -30,4 +30,7 @@ extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
int enable);
+extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+ int enable);
+
#endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 9215039..5e2f353 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -39,9 +39,22 @@ static struct sysdev_driver s3c2410_irq_driver = {
.resume = s3c24xx_irq_resume,
};
-static int s3c2410_irq_init(void)
+static int __init s3c2410_irq_init(void)
{
return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
}
arch_initcall(s3c2410_irq_init);
+
+static struct sysdev_driver s3c2410a_irq_driver = {
+ .add = s3c2410_irq_add,
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
+};
+
+static int __init s3c2410a_irq_init(void)
+{
+ return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_irq_driver);
+}
+
+arch_initcall(s3c2410a_irq_init);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index ce3baba..647c9ad 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -45,6 +45,7 @@
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
+#include <plat/hwmon.h>
#include <plat/nand.h>
#include <plat/iic.h>
#include <mach/fb.h>
@@ -59,6 +60,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/cpu-freq.h>
#include "usb-simtec.h"
#include "nor-simtec.h"
@@ -547,7 +549,35 @@ static struct i2c_board_info bast_i2c_devs[] __initdata = {
},
};
+static struct s3c_hwmon_pdata bast_hwmon_info = {
+ /* LCD contrast (0-6.6V) */
+ .in[0] = &(struct s3c_hwmon_chcfg) {
+ .name = "lcd-contrast",
+ .mult = 3300,
+ .div = 512,
+ },
+ /* LED current feedback */
+ .in[1] = &(struct s3c_hwmon_chcfg) {
+ .name = "led-feedback",
+ .mult = 3300,
+ .div = 1024,
+ },
+ /* LCD feedback (0-6.6V) */
+ .in[2] = &(struct s3c_hwmon_chcfg) {
+ .name = "lcd-feedback",
+ .mult = 3300,
+ .div = 512,
+ },
+ /* Vcore (1.8-2.0V), Vref 3.3V */
+ .in[3] = &(struct s3c_hwmon_chcfg) {
+ .name = "vcore",
+ .mult = 3300,
+ .div = 1024,
+ },
+};
+
/* Standard BAST devices */
+// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
static struct platform_device *bast_devices[] __initdata = {
&s3c_device_usb,
@@ -556,6 +586,8 @@ static struct platform_device *bast_devices[] __initdata = {
&s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_nand,
+ &s3c_device_adc,
+ &s3c_device_hwmon,
&bast_device_dm9k,
&bast_device_asix,
&bast_device_axpp,
@@ -570,6 +602,12 @@ static struct clk *bast_clocks[] __initdata = {
&s3c24xx_uclk,
};
+static struct s3c_cpufreq_board __initdata bast_cpufreq = {
+ .refresh = 7800, /* 7.8usec */
+ .auto_io = 1,
+ .need_io = 1,
+};
+
static void __init bast_map_io(void)
{
/* initialise the clocks */
@@ -588,6 +626,7 @@ static void __init bast_map_io(void)
s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
s3c_device_nand.dev.platform_data = &bast_nand_info;
+ s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
@@ -608,6 +647,8 @@ static void __init bast_init(void)
usb_simtec_init();
nor_simtec_init();
+
+ s3c_cpufreq_setboard(&bast_cpufreq);
}
MACHINE_START(BAST, "Simtec-BAST")
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
new file mode 100644
index 0000000..f178c2f
--- /dev/null
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -0,0 +1,95 @@
+/* arch/arm/mach-s3c2410/pll.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2410 CPU PLL tables
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table pll_vals_12MHz[] = {
+ { .frequency = 34000000, .index = PLLVAL(82, 2, 3), },
+ { .frequency = 45000000, .index = PLLVAL(82, 1, 3), },
+ { .frequency = 51000000, .index = PLLVAL(161, 3, 3), },
+ { .frequency = 48000000, .index = PLLVAL(120, 2, 3), },
+ { .frequency = 56000000, .index = PLLVAL(142, 2, 3), },
+ { .frequency = 68000000, .index = PLLVAL(82, 2, 2), },
+ { .frequency = 79000000, .index = PLLVAL(71, 1, 2), },
+ { .frequency = 85000000, .index = PLLVAL(105, 2, 2), },
+ { .frequency = 90000000, .index = PLLVAL(112, 2, 2), },
+ { .frequency = 101000000, .index = PLLVAL(127, 2, 2), },
+ { .frequency = 113000000, .index = PLLVAL(105, 1, 2), },
+ { .frequency = 118000000, .index = PLLVAL(150, 2, 2), },
+ { .frequency = 124000000, .index = PLLVAL(116, 1, 2), },
+ { .frequency = 135000000, .index = PLLVAL(82, 2, 1), },
+ { .frequency = 147000000, .index = PLLVAL(90, 2, 1), },
+ { .frequency = 152000000, .index = PLLVAL(68, 1, 1), },
+ { .frequency = 158000000, .index = PLLVAL(71, 1, 1), },
+ { .frequency = 170000000, .index = PLLVAL(77, 1, 1), },
+ { .frequency = 180000000, .index = PLLVAL(82, 1, 1), },
+ { .frequency = 186000000, .index = PLLVAL(85, 1, 1), },
+ { .frequency = 192000000, .index = PLLVAL(88, 1, 1), },
+ { .frequency = 203000000, .index = PLLVAL(161, 3, 1), },
+
+ /* 2410A extras */
+
+ { .frequency = 210000000, .index = PLLVAL(132, 2, 1), },
+ { .frequency = 226000000, .index = PLLVAL(105, 1, 1), },
+ { .frequency = 266000000, .index = PLLVAL(125, 1, 1), },
+ { .frequency = 268000000, .index = PLLVAL(126, 1, 1), },
+ { .frequency = 270000000, .index = PLLVAL(127, 1, 1), },
+};
+
+static int s3c2410_plls_add(struct sys_device *dev)
+{
+ return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
+}
+
+static struct sysdev_driver s3c2410_plls_drv = {
+ .add = s3c2410_plls_add,
+};
+
+static int __init s3c2410_pll_init(void)
+{
+ return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_plls_drv);
+
+}
+
+arch_initcall(s3c2410_pll_init);
+
+static struct sysdev_driver s3c2410a_plls_drv = {
+ .add = s3c2410_plls_add,
+};
+
+static int __init s3c2410a_pll_init(void)
+{
+ return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_plls_drv);
+}
+
+arch_initcall(s3c2410a_pll_init);
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 143e08a..966119c 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -119,6 +119,18 @@ static int __init s3c2410_pm_drvinit(void)
}
arch_initcall(s3c2410_pm_drvinit);
+
+static struct sysdev_driver s3c2410a_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
+};
+
+static int __init s3c2410a_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_pm_driver);
+}
+
+arch_initcall(s3c2410a_pm_drvinit);
#endif
#if defined(CONFIG_CPU_S3C2440)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index feb141b1..91ba42f 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -105,17 +105,33 @@ void __init_or_cpufreq s3c2410_setup_clocks(void)
s3c24xx_setup_clocks(fclk, hclk, pclk);
}
+/* fake ARMCLK for use with cpufreq, etc. */
+
+static struct clk s3c2410_armclk = {
+ .name = "armclk",
+ .parent = &clk_f,
+ .id = -1,
+};
+
void __init s3c2410_init_clocks(int xtal)
{
s3c24xx_register_baseclocks(xtal);
s3c2410_setup_clocks();
s3c2410_baseclk_add();
+ s3c24xx_register_clock(&s3c2410_armclk);
}
struct sysdev_class s3c2410_sysclass = {
.name = "s3c2410-core",
};
+/* Note, we would have liked to name this s3c2410-core, but we cannot
+ * register two sysdev_class with the same name.
+ */
+struct sysdev_class s3c2410a_sysclass = {
+ .name = "s3c2410a-core",
+};
+
static struct sys_device s3c2410_sysdev = {
.cls = &s3c2410_sysclass,
};
@@ -133,9 +149,22 @@ static int __init s3c2410_core_init(void)
core_initcall(s3c2410_core_init);
+static int __init s3c2410a_core_init(void)
+{
+ return sysdev_class_register(&s3c2410a_sysclass);
+}
+
+core_initcall(s3c2410a_core_init);
+
int __init s3c2410_init(void)
{
printk("S3C2410: Initialising architecture\n");
return sysdev_register(&s3c2410_sysdev);
}
+
+int __init s3c2410a_init(void)
+{
+ s3c2410_sysdev.cls = &s3c2410a_sysclass;
+ return s3c2410_init();
+}
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 63586ff..35c1bde 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -32,6 +32,15 @@ config S3C2412_PM
help
Internal config node to apply S3C2412 power management
+# Note, the S3C2412 IOtiming support is in plat-s3c24xx
+
+config S3C2412_CPUFREQ
+ bool
+ depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+ select S3C2412_IOTIMING
+ default y
+ help
+ CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
menu "S3C2412 Machines"
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 20918d5..530ec46 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_S3C2412) += clock.o
obj-$(CONFIG_CPU_S3C2412) += gpio.o
obj-$(CONFIG_S3C2412_DMA) += dma.o
obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o
+obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o
# Machine support
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
new file mode 100644
index 0000000..eb3ea17
--- /dev/null
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -0,0 +1,257 @@
+/* linux/arch/arm/mach-s3c2412/cpu-freq.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 CPU Frequency scalling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* our clock resources. */
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned int hdiv, pdiv, armdiv, dvs;
+ unsigned long hclk, fclk, armclk, armdiv_clk;
+ unsigned long hclk_max;
+
+ fclk = cfg->freq.fclk;
+ armclk = cfg->freq.armclk;
+ hclk_max = cfg->max.hclk;
+
+ /* We can't run hclk above armclk as at the best we have to
+ * have armclk and hclk in dvs mode. */
+
+ if (hclk_max > armclk)
+ hclk_max = armclk;
+
+ s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
+ __func__, fclk, armclk, hclk_max);
+ s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
+ __func__, cfg->freq.fclk, cfg->freq.armclk,
+ cfg->freq.hclk, cfg->freq.pclk);
+
+ armdiv = fclk / armclk;
+
+ if (armdiv < 1)
+ armdiv = 1;
+ if (armdiv > 2)
+ armdiv = 2;
+
+ cfg->divs.arm_divisor = armdiv;
+ armdiv_clk = fclk / armdiv;
+
+ hdiv = armdiv_clk / hclk_max;
+ if (hdiv < 1)
+ hdiv = 1;
+
+ cfg->freq.hclk = hclk = armdiv_clk / hdiv;
+
+ /* set dvs depending on whether we reached armclk or not. */
+ cfg->divs.dvs = dvs = armclk < armdiv_clk;
+
+ /* update the actual armclk we achieved. */
+ cfg->freq.armclk = dvs ? hclk : armdiv_clk;
+
+ s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
+ __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
+
+ if (hdiv > 4)
+ goto invalid;
+
+ pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+ if ((hclk / pdiv) > cfg->max.pclk)
+ pdiv++;
+
+ cfg->freq.pclk = hclk / pdiv;
+
+ s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+ if (pdiv > 2)
+ goto invalid;
+
+ pdiv *= hdiv;
+
+ /* store the result, and then return */
+
+ cfg->divs.h_divisor = hdiv * armdiv;
+ cfg->divs.p_divisor = pdiv * armdiv;
+
+ return 0;
+
+ invalid:
+ return -EINVAL;
+}
+
+static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long clkdiv;
+ unsigned long olddiv;
+
+ olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+
+ /* clear off current clock info */
+
+ clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
+ clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
+ clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
+
+ if (cfg->divs.arm_divisor == 2)
+ clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
+
+ clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
+
+ if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+ clkdiv |= S3C2412_CLKDIVN_PDIVN;
+
+ s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+ clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ struct s3c_cpufreq_board *board = cfg->board;
+ unsigned long refresh;
+
+ s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
+ board->refresh, cfg->freq.hclk);
+
+ /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+ * by 10 each to ensure that we do not overflow 32 bit numbers. This
+ * should work for HCLK up to 133MHz and refresh period up to 30usec.
+ */
+
+ refresh = (board->refresh / 10);
+ refresh *= (cfg->freq.hclk / 100);
+ refresh /= (1 * 1000 * 1000); /* 10^6 */
+
+ s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
+ __raw_writel(refresh, S3C2412_REFRESH);
+}
+
+/* set the default cpu frequency information, based on an 200MHz part
+ * as we have no other way of detecting the speed rating in software.
+ */
+
+static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
+ .max = {
+ .fclk = 200000000,
+ .hclk = 100000000,
+ .pclk = 50000000,
+ },
+
+ .latency = 5000000, /* 5ms */
+
+ .locktime_m = 150,
+ .locktime_u = 150,
+ .locktime_bits = 16,
+
+ .name = "s3c2412",
+ .set_refresh = s3c2412_cpufreq_setrefresh,
+ .set_divs = s3c2412_cpufreq_setdivs,
+ .calc_divs = s3c2412_cpufreq_calcdivs,
+
+ .calc_iotiming = s3c2412_iotiming_calc,
+ .set_iotiming = s3c2412_iotiming_set,
+ .get_iotiming = s3c2412_iotiming_get,
+
+ .resume_clocks = s3c2412_setup_clocks,
+
+ .debug_io_show = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
+};
+
+static int s3c2412_cpufreq_add(struct sys_device *sysdev)
+{
+ unsigned long fclk_rate;
+
+ hclk = clk_get(NULL, "hclk");
+ if (IS_ERR(hclk)) {
+ printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
+ return -ENOENT;
+ }
+
+ fclk = clk_get(NULL, "fclk");
+ if (IS_ERR(fclk)) {
+ printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
+ goto err_fclk;
+ }
+
+ fclk_rate = clk_get_rate(fclk);
+ if (fclk_rate > 200000000) {
+ printk(KERN_INFO
+ "%s: fclk %ld MHz, assuming 266MHz capable part\n",
+ __func__, fclk_rate / 1000000);
+ s3c2412_cpufreq_info.max.fclk = 266000000;
+ s3c2412_cpufreq_info.max.hclk = 133000000;
+ s3c2412_cpufreq_info.max.pclk = 66000000;
+ }
+
+ armclk = clk_get(NULL, "armclk");
+ if (IS_ERR(armclk)) {
+ printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
+ goto err_armclk;
+ }
+
+ xtal = clk_get(NULL, "xtal");
+ if (IS_ERR(xtal)) {
+ printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
+ goto err_xtal;
+ }
+
+ return s3c_cpufreq_register(&s3c2412_cpufreq_info);
+
+err_xtal:
+ clk_put(armclk);
+err_armclk:
+ clk_put(fclk);
+err_fclk:
+ clk_put(hclk);
+
+ return -ENOENT;
+}
+
+static struct sysdev_driver s3c2412_cpufreq_driver = {
+ .add = s3c2412_cpufreq_add,
+};
+
+static int s3c2412_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2412_sysclass,
+ &s3c2412_cpufreq_driver);
+}
+
+arch_initcall(s3c2412_cpufreq_init);
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 5b5aba6..bef39f7 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -69,6 +69,18 @@ static struct map_desc s3c2412_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
IODESC_ENT(TIMER),
IODESC_ENT(WATCHDOG),
+ {
+ .virtual = (unsigned long)S3C2412_VA_SSMC,
+ .pfn = __phys_to_pfn(S3C2412_PA_SSMC),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = (unsigned long)S3C2412_VA_EBI,
+ .pfn = __phys_to_pfn(S3C2412_PA_EBI),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ },
};
/* uart registration process */
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8cfeaec..8ae1b28 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -33,6 +33,7 @@ config MACH_ANUBIS
select PM_SIMTEC if PM
select HAVE_PATA_PLATFORM
select S3C24XX_GPIO_EXTRA64
+ select S3C2440_XTAL_12000000
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics ANUBIS
@@ -44,6 +45,8 @@ config MACH_OSIRIS
select S3C24XX_DCLK
select PM_SIMTEC if PM
select S3C24XX_GPIO_EXTRA128
+ select S3C2440_XTAL_12000000
+ select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec IM2440D20 module, also
@@ -52,6 +55,7 @@ config MACH_OSIRIS
config MACH_RX3715
bool "HP iPAQ rx3715"
select CPU_S3C2440
+ select S3C2440_XTAL_16934400
select PM_H1940 if PM
help
Say Y here if you are using the HP iPAQ rx3715.
@@ -59,6 +63,7 @@ config MACH_RX3715
config ARCH_S3C2440
bool "SMDK2440"
select CPU_S3C2440
+ select S3C2440_XTAL_16934400
select MACH_SMDK
select S3C_DEV_USB_HOST
help
@@ -67,6 +72,7 @@ config ARCH_S3C2440
config MACH_NEXCODER_2440
bool "NexVision NEXCODER 2440 Light Board"
select CPU_S3C2440
+ select S3C2440_XTAL_12000000
select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
@@ -75,6 +81,7 @@ config SMDK2440_CPU2440
bool "SMDK2440 with S3C2440 CPU module"
depends on ARCH_S3C2440
default y if ARCH_S3C2440
+ select S3C2440_XTAL_16934400
select CPU_S3C2440
config MACH_AT2440EVB
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index cba064b..2105a41 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -34,6 +34,7 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
+#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-mem.h>
@@ -351,6 +352,12 @@ static struct clk *osiris_clocks[] __initdata = {
&s3c24xx_uclk,
};
+static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
+ .refresh = 7800, /* refresh period is 7.8usec */
+ .auto_io = 1,
+ .need_io = 1,
+};
+
static void __init osiris_map_io(void)
{
unsigned long flags;
@@ -402,6 +409,8 @@ static void __init osiris_init(void)
s3c_i2c0_set_platdata(NULL);
+ s3c_cpufreq_setboard(&osiris_cpufreq);
+
i2c_register_board_info(0, osiris_i2c_devs,
ARRAY_SIZE(osiris_i2c_devs));
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index a011327..79e4d93 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -81,5 +81,6 @@
#define S3C_PA_UART S3C24A0_PA_UART
#define S3C_PA_IIC S3C24A0_PA_IIC
+#define S3C_PA_NAND S3C24XX_PA_NAND
#endif /* __ASM_ARCH_24A0_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d99..fc8b223 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -38,18 +38,21 @@
#define S3C_VA_UART2 S3C_VA_UARTx(2)
#define S3C_VA_UART3 S3C_VA_UARTx(3)
+#define S3C64XX_PA_NAND (0x70200000)
#define S3C64XX_PA_FB (0x77100000)
#define S3C64XX_PA_USB_HSOTG (0x7C000000)
#define S3C64XX_PA_WATCHDOG (0x7E004000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
+#define S3C64XX_PA_AC97 (0x7F001000)
#define S3C64XX_PA_IIS0 (0x7F002000)
#define S3C64XX_PA_IIS1 (0x7F003000)
#define S3C64XX_PA_TIMER (0x7F006000)
#define S3C64XX_PA_IIC0 (0x7F004000)
+#define S3C64XX_PA_IISV4 (0x7F00D000)
#define S3C64XX_PA_IIC1 (0x7F00F000)
#define S3C64XX_PA_GPIO (0x7F008000)
-#define S3C64XX_VA_GPIO S3C_ADDR(0x00500000)
+#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
#define S3C64XX_SZ_GPIO SZ_4K
#define S3C64XX_PA_SDRAM (0x50000000)
@@ -57,7 +60,7 @@
#define S3C64XX_PA_VIC1 (0x71300000)
#define S3C64XX_PA_MODEM (0x74108000)
-#define S3C64XX_VA_MODEM S3C_ADDR(0x00600000)
+#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
#define S3C64XX_PA_USBHOST (0x74300000)
@@ -72,6 +75,7 @@
#define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2
#define S3C_PA_IIC S3C64XX_PA_IIC0
#define S3C_PA_IIC1 S3C64XX_PA_IIC1
+#define S3C_PA_NAND S3C64XX_PA_NAND
#define S3C_PA_FB S3C64XX_PA_FB
#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
index 1ece887..b42bdd0f 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -48,6 +48,8 @@ void __init s3c6400_map_io(void)
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
+
+ s3c_device_nand.name = "s3c6400-nand";
}
void __init s3c6400_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index e63aac7..f9d0f09 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -97,3 +97,13 @@ config MACH_NCP
select S3C64XX_SETUP_I2C1
help
Machine support for the Samsung NCP
+
+config MACH_HMT
+ bool "Airgoo HMT"
+ select CPU_S3C6410
+ select S3C_DEV_FB
+ select S3C_DEV_USB_HOST
+ select S3C64XX_SETUP_FB_24BPP
+ select HAVE_PWM
+ help
+ Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 6f9deac..3e48c3d 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -23,5 +23,4 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_NCP) += mach-ncp.o
-
-
+obj-$(CONFIG_MACH_HMT) += mach-hmt.o
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index ade904d..9b67c66 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -62,6 +62,8 @@ void __init s3c6410_map_io(void)
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
+
+ s3c_device_nand.name = "s3c6400-nand";
}
void __init s3c6410_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
new file mode 100644
index 0000000..c574105
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -0,0 +1,276 @@
+/* mach-hmt.c - Platform code for Airgoo HMT
+ *
+ * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/pwm_backlight.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+static int hmt_bl_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
+ if (!ret)
+ ret = gpio_direction_output(S3C64XX_GPB(4), 0);
+
+ return ret;
+}
+
+static int hmt_bl_notify(int brightness)
+{
+ /*
+ * translate from CIELUV/CIELAB L*->brightness, E.G. from
+ * perceived luminance to light output. Assumes range 0..25600
+ */
+ if (brightness < 0x800) {
+ /* Y = Yn * L / 903.3 */
+ brightness = (100*256 * brightness + 231245/2) / 231245;
+ } else {
+ /* Y = Yn * ((L + 16) / 116 )^3 */
+ int t = (brightness*4 + 16*1024 + 58)/116;
+ brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
+ }
+
+ gpio_set_value(S3C64XX_GPB(4), brightness);
+
+ return brightness;
+}
+
+static void hmt_bl_exit(struct device *dev)
+{
+ gpio_free(S3C64XX_GPB(4));
+}
+
+static struct platform_pwm_backlight_data hmt_backlight_data = {
+ .pwm_id = 1,
+ .max_brightness = 100 * 256,
+ .dft_brightness = 40 * 256,
+ .pwm_period_ns = 1000000000 / (100 * 256 * 20),
+ .init = hmt_bl_init,
+ .notify = hmt_bl_notify,
+ .exit = hmt_bl_exit,
+
+};
+
+static struct platform_device hmt_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &s3c_device_timer[1].dev,
+ .platform_data = &hmt_backlight_data,
+ },
+};
+
+static struct s3c_fb_pd_win hmt_fb_win0 = {
+ .win_mode = {
+ .pixclock = 41094,
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &hmt_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition hmt_nand_part[] = {
+ [0] = {
+ .name = "uboot",
+ .size = SZ_512K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "uboot-env1",
+ .size = SZ_256K,
+ .offset = SZ_512K,
+ },
+ [2] = {
+ .name = "uboot-env2",
+ .size = SZ_256K,
+ .offset = SZ_512K + SZ_256K,
+ },
+ [3] = {
+ .name = "kernel",
+ .size = SZ_2M,
+ .offset = SZ_1M,
+ },
+ [4] = {
+ .name = "rootfs",
+ .size = MTDPART_SIZ_FULL,
+ .offset = SZ_1M + SZ_2M,
+ },
+};
+
+static struct s3c2410_nand_set hmt_nand_sets[] = {
+ [0] = {
+ .name = "nand",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(hmt_nand_part),
+ .partitions = hmt_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand hmt_nand_info = {
+ .tacls = 25,
+ .twrph0 = 55,
+ .twrph1 = 40,
+ .nr_sets = ARRAY_SIZE(hmt_nand_sets),
+ .sets = hmt_nand_sets,
+};
+
+static struct gpio_led hmt_leds[] = {
+ { /* left function keys */
+ .name = "left:blue",
+ .gpio = S3C64XX_GPO(12),
+ .default_trigger = "default-on",
+ },
+ { /* right function keys - red */
+ .name = "right:red",
+ .gpio = S3C64XX_GPO(13),
+ },
+ { /* right function keys - green */
+ .name = "right:green",
+ .gpio = S3C64XX_GPO(14),
+ },
+ { /* right function keys - blue */
+ .name = "right:blue",
+ .gpio = S3C64XX_GPO(15),
+ .default_trigger = "default-on",
+ },
+};
+
+static struct gpio_led_platform_data hmt_led_data = {
+ .num_leds = ARRAY_SIZE(hmt_leds),
+ .leds = hmt_leds,
+};
+
+static struct platform_device hmt_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev.platform_data = &hmt_led_data,
+};
+
+static struct map_desc hmt_iodesc[] = {};
+
+static struct platform_device *hmt_devices[] __initdata = {
+ &s3c_device_i2c0,
+ &s3c_device_nand,
+ &s3c_device_fb,
+ &s3c_device_usb,
+ &s3c_device_timer[1],
+ &hmt_backlight_device,
+ &hmt_leds_device,
+};
+
+static void __init hmt_map_io(void)
+{
+ s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+}
+
+static void __init hmt_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+ s3c_fb_set_platdata(&hmt_lcd_pdata);
+ s3c_device_nand.dev.platform_data = &hmt_nand_info;
+
+ gpio_request(S3C64XX_GPC(7), "usb power");
+ gpio_direction_output(S3C64XX_GPC(7), 0);
+ gpio_request(S3C64XX_GPM(0), "usb power");
+ gpio_direction_output(S3C64XX_GPM(0), 1);
+ gpio_request(S3C64XX_GPK(7), "usb power");
+ gpio_direction_output(S3C64XX_GPK(7), 1);
+ gpio_request(S3C64XX_GPF(13), "usb power");
+ gpio_direction_output(S3C64XX_GPF(13), 1);
+
+ platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
+}
+
+MACHINE_START(HMT, "Airgoo-HMT")
+ /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .init_irq = s3c6410_init_irq,
+ .map_io = hmt_map_io,
+ .init_machine = hmt_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c
index 6030636..55e9bbf 100644
--- a/arch/arm/mach-s3c6410/mach-ncp.c
+++ b/arch/arm/mach-s3c6410/mach-ncp.c
@@ -79,7 +79,7 @@ static struct platform_device *ncp_devices[] __initdata = {
&s3c_device_i2c0,
};
-struct map_desc ncp_iodesc[] = {};
+static struct map_desc ncp_iodesc[] __initdata = {};
static void __init ncp_map_io(void)
{
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index bc9a7de..ea51dbe 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -65,16 +65,30 @@ static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = 0x3c5,
- .ulcon = 0x03,
- .ufcon = 0x51,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
},
};
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
new file mode 100644
index 0000000..b1a4ba5
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -0,0 +1,22 @@
+# arch/arm/mach-s5pc100/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+# Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PC100 CPU
+
+config CPU_S5PC100
+ bool
+ select CPU_S5PC100_INIT
+ select CPU_S5PC100_CLOCK
+ help
+ Enable S5PC100 CPU support
+
+config MACH_SMDKC100
+ bool "SMDKC100"
+ select CPU_S5PC100
+ select S5PC1XX_SETUP_I2C1
+ help
+ Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
new file mode 100644
index 0000000..afc89b3
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -0,0 +1,17 @@
+# arch/arm/mach-s5pc100/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core support for S5PC100 system
+
+obj-$(CONFIG_CPU_S5PC100) += cpu.o
+
+# machine support
+obj-$(CONFIG_MACH_SMDKC100) += mach-smdkc100.o
diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot
new file mode 100644
index 0000000..ff90aa1
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile.boot
@@ -0,0 +1,2 @@
+ zreladdr-y := 0x20008000
+params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
new file mode 100644
index 0000000..0e71889
--- /dev/null
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -0,0 +1,97 @@
+/* linux/arch/arm/mach-s5pc100/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6410/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s5pc100.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5pc100_iodesc[] __initdata = {
+};
+
+/* s5pc100_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5pc100_map_io(void)
+{
+ iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
+
+ /* initialise device information early */
+}
+
+void __init s5pc100_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+ s3c24xx_register_baseclocks(xtal);
+ s5pc1xx_register_clocks();
+ s5pc100_register_clocks();
+ s5pc100_setup_clocks();
+}
+
+void __init s5pc100_init_irq(void)
+{
+ u32 vic_valid[] = {~0, ~0, ~0};
+
+ /* VIC0, VIC1, and VIC2 are fully populated. */
+ s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid));
+}
+
+struct sysdev_class s5pc100_sysclass = {
+ .name = "s5pc100-core",
+};
+
+static struct sys_device s5pc100_sysdev = {
+ .cls = &s5pc100_sysclass,
+};
+
+static int __init s5pc100_core_init(void)
+{
+ return sysdev_class_register(&s5pc100_sysclass);
+}
+
+core_initcall(s5pc100_core_init);
+
+int __init s5pc100_init(void)
+{
+ printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
+
+ return sysdev_register(&s5pc100_sysdev);
+}
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
new file mode 100644
index 0000000..9d142cc
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ *
+ * Based on mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+ /* note, for the boot process to work we have to keep the UART
+ * virtual address aligned to an 1MiB boundary for the L1
+ * mapping the head code makes. We keep the UART virtual address
+ * aligned and add in the offset when we load the value here.
+ */
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, = S3C_PA_UART
+ ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+ add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+ .endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
new file mode 100644
index 0000000..6713193
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -0,0 +1,50 @@
+/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for the Samsung S5PC1XX series
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =S3C_VA_VIC0
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ @ check the vic0
+ mov \irqnr, # S3C_IRQ_OFFSET + 31
+ ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
+ teq \irqstat, #0
+
+ @ otherwise try vic1
+ addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ @ otherwise try vic2
+ addeq \tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
new file mode 100644
index 0000000..ad28d8e
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio-core.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO core support
+ *
+ * Based on mach-s3c6400/include/mach/gpio-core.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+/* currently we just include the platform support */
+#include <plat/gpio-core.h>
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
new file mode 100644
index 0000000..c74fc93
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -0,0 +1,146 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO lib support
+ *
+ * Base on mach-s3c6400/include/mach/gpio.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5PC1XX_GPIO_A0_NR (8)
+#define S5PC1XX_GPIO_A1_NR (5)
+#define S5PC1XX_GPIO_B_NR (8)
+#define S5PC1XX_GPIO_C_NR (5)
+#define S5PC1XX_GPIO_D_NR (7)
+#define S5PC1XX_GPIO_E0_NR (8)
+#define S5PC1XX_GPIO_E1_NR (6)
+#define S5PC1XX_GPIO_F0_NR (8)
+#define S5PC1XX_GPIO_F1_NR (8)
+#define S5PC1XX_GPIO_F2_NR (8)
+#define S5PC1XX_GPIO_F3_NR (4)
+#define S5PC1XX_GPIO_G0_NR (8)
+#define S5PC1XX_GPIO_G1_NR (3)
+#define S5PC1XX_GPIO_G2_NR (7)
+#define S5PC1XX_GPIO_G3_NR (7)
+#define S5PC1XX_GPIO_H0_NR (8)
+#define S5PC1XX_GPIO_H1_NR (8)
+#define S5PC1XX_GPIO_H2_NR (8)
+#define S5PC1XX_GPIO_H3_NR (8)
+#define S5PC1XX_GPIO_I_NR (8)
+#define S5PC1XX_GPIO_J0_NR (8)
+#define S5PC1XX_GPIO_J1_NR (5)
+#define S5PC1XX_GPIO_J2_NR (8)
+#define S5PC1XX_GPIO_J3_NR (8)
+#define S5PC1XX_GPIO_J4_NR (4)
+#define S5PC1XX_GPIO_K0_NR (8)
+#define S5PC1XX_GPIO_K1_NR (6)
+#define S5PC1XX_GPIO_K2_NR (8)
+#define S5PC1XX_GPIO_K3_NR (8)
+#define S5PC1XX_GPIO_MP00_NR (8)
+#define S5PC1XX_GPIO_MP01_NR (8)
+#define S5PC1XX_GPIO_MP02_NR (8)
+#define S5PC1XX_GPIO_MP03_NR (8)
+#define S5PC1XX_GPIO_MP04_NR (5)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PC1XX_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+ S5PC1XX_GPIO_A0_START = 0,
+ S5PC1XX_GPIO_A1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
+ S5PC1XX_GPIO_B_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
+ S5PC1XX_GPIO_C_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
+ S5PC1XX_GPIO_D_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
+ S5PC1XX_GPIO_E0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
+ S5PC1XX_GPIO_E1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
+ S5PC1XX_GPIO_F0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
+ S5PC1XX_GPIO_F1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
+ S5PC1XX_GPIO_F2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
+ S5PC1XX_GPIO_F3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
+ S5PC1XX_GPIO_G0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
+ S5PC1XX_GPIO_G1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
+ S5PC1XX_GPIO_G2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
+ S5PC1XX_GPIO_G3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
+ S5PC1XX_GPIO_H0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
+ S5PC1XX_GPIO_H1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
+ S5PC1XX_GPIO_H2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
+ S5PC1XX_GPIO_H3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
+ S5PC1XX_GPIO_I_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
+ S5PC1XX_GPIO_J0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
+ S5PC1XX_GPIO_J1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
+ S5PC1XX_GPIO_J2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
+ S5PC1XX_GPIO_J3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
+ S5PC1XX_GPIO_J4_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
+ S5PC1XX_GPIO_K0_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
+ S5PC1XX_GPIO_K1_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
+ S5PC1XX_GPIO_K2_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
+ S5PC1XX_GPIO_K3_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
+ S5PC1XX_GPIO_MP00_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
+ S5PC1XX_GPIO_MP01_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
+ S5PC1XX_GPIO_MP02_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
+ S5PC1XX_GPIO_MP03_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
+ S5PC1XX_GPIO_MP04_START = S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+};
+
+/* S5PC1XX GPIO number definitions. */
+#define S5PC1XX_GPA0(_nr) (S5PC1XX_GPIO_A0_START + (_nr))
+#define S5PC1XX_GPA1(_nr) (S5PC1XX_GPIO_A1_START + (_nr))
+#define S5PC1XX_GPB(_nr) (S5PC1XX_GPIO_B_START + (_nr))
+#define S5PC1XX_GPC(_nr) (S5PC1XX_GPIO_C_START + (_nr))
+#define S5PC1XX_GPD(_nr) (S5PC1XX_GPIO_D_START + (_nr))
+#define S5PC1XX_GPE0(_nr) (S5PC1XX_GPIO_E0_START + (_nr))
+#define S5PC1XX_GPE1(_nr) (S5PC1XX_GPIO_E1_START + (_nr))
+#define S5PC1XX_GPF0(_nr) (S5PC1XX_GPIO_F0_START + (_nr))
+#define S5PC1XX_GPF1(_nr) (S5PC1XX_GPIO_F1_START + (_nr))
+#define S5PC1XX_GPF2(_nr) (S5PC1XX_GPIO_F2_START + (_nr))
+#define S5PC1XX_GPF3(_nr) (S5PC1XX_GPIO_F3_START + (_nr))
+#define S5PC1XX_GPG0(_nr) (S5PC1XX_GPIO_G0_START + (_nr))
+#define S5PC1XX_GPG1(_nr) (S5PC1XX_GPIO_G1_START + (_nr))
+#define S5PC1XX_GPG2(_nr) (S5PC1XX_GPIO_G2_START + (_nr))
+#define S5PC1XX_GPG3(_nr) (S5PC1XX_GPIO_G3_START + (_nr))
+#define S5PC1XX_GPH0(_nr) (S5PC1XX_GPIO_H0_START + (_nr))
+#define S5PC1XX_GPH1(_nr) (S5PC1XX_GPIO_H1_START + (_nr))
+#define S5PC1XX_GPH2(_nr) (S5PC1XX_GPIO_H2_START + (_nr))
+#define S5PC1XX_GPH3(_nr) (S5PC1XX_GPIO_H3_START + (_nr))
+#define S5PC1XX_GPI(_nr) (S5PC1XX_GPIO_I_START + (_nr))
+#define S5PC1XX_GPJ0(_nr) (S5PC1XX_GPIO_J0_START + (_nr))
+#define S5PC1XX_GPJ1(_nr) (S5PC1XX_GPIO_J1_START + (_nr))
+#define S5PC1XX_GPJ2(_nr) (S5PC1XX_GPIO_J2_START + (_nr))
+#define S5PC1XX_GPJ3(_nr) (S5PC1XX_GPIO_J3_START + (_nr))
+#define S5PC1XX_GPJ4(_nr) (S5PC1XX_GPIO_J4_START + (_nr))
+#define S5PC1XX_GPK0(_nr) (S5PC1XX_GPIO_K0_START + (_nr))
+#define S5PC1XX_GPK1(_nr) (S5PC1XX_GPIO_K1_START + (_nr))
+#define S5PC1XX_GPK2(_nr) (S5PC1XX_GPIO_K2_START + (_nr))
+#define S5PC1XX_GPK3(_nr) (S5PC1XX_GPIO_K3_START + (_nr))
+#define S5PC1XX_MP00(_nr) (S5PC1XX_GPIO_MP00_START + (_nr))
+#define S5PC1XX_MP01(_nr) (S5PC1XX_GPIO_MP01_START + (_nr))
+#define S5PC1XX_MP02(_nr) (S5PC1XX_GPIO_MP02_START + (_nr))
+#define S5PC1XX_MP03(_nr) (S5PC1XX_GPIO_MP03_START + (_nr))
+#define S5PC1XX_MP04(_nr) (S5PC1XX_GPIO_MP04_START + (_nr))
+
+/* the end of the S5PC1XX specific gpios */
+#define S5PC1XX_GPIO_END (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define S3C_GPIO_END S5PC1XX_GPIO_END
+
+/* define the number of gpios we need to the one after the MP04() range */
+#define ARCH_NR_GPIOS (S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
new file mode 100644
index 0000000..6b38618
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/hardware.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
new file mode 100644
index 0000000..622720d
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - IRQ definitions
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
new file mode 100644
index 0000000..9e9f391
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -0,0 +1,75 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/map.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/map.h
+ *
+ * S5PC1XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+
+/* Chip ID */
+#define S5PC100_PA_CHIPID (0xE0000000)
+#define S5PC1XX_PA_CHIPID S5PC100_PA_CHIPID
+#define S5PC1XX_VA_CHIPID S3C_VA_SYS
+
+/* System */
+#define S5PC100_PA_SYS (0xE0100000)
+#define S5PC100_PA_CLK (S5PC100_PA_SYS + 0x0)
+#define S5PC100_PA_PWR (S5PC100_PA_SYS + 0x8000)
+#define S5PC1XX_PA_CLK S5PC100_PA_CLK
+#define S5PC1XX_PA_PWR S5PC100_PA_PWR
+#define S5PC1XX_VA_CLK (S3C_VA_SYS + 0x10000)
+#define S5PC1XX_VA_PWR (S3C_VA_SYS + 0x20000)
+
+/* Interrupt */
+#define S5PC100_PA_VIC (0xE4000000)
+#define S5PC100_VA_VIC S3C_VA_IRQ
+#define S5PC100_PA_VIC_OFFSET 0x100000
+#define S5PC100_VA_VIC_OFFSET 0x10000
+#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
+#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+
+/* Timer */
+#define S5PC100_PA_TIMER (0xEA000000)
+#define S5PC1XX_PA_TIMER S5PC100_PA_TIMER
+#define S5PC1XX_VA_TIMER S3C_VA_TIMER
+
+/* UART */
+#define S5PC100_PA_UART (0xEC000000)
+#define S5PC1XX_PA_UART S5PC100_PA_UART
+#define S5PC1XX_VA_UART S3C_VA_UART
+
+/* IIC */
+#define S5PC100_PA_IIC (0xEC100000)
+
+/* ETC */
+#define S5PC100_PA_SDRAM (0x20000000)
+
+/* compatibility defines. */
+#define S3C_PA_UART S5PC100_PA_UART
+#define S3C_PA_UART0 (S5PC100_PA_UART + 0x0)
+#define S3C_PA_UART1 (S5PC100_PA_UART + 0x400)
+#define S3C_PA_UART2 (S5PC100_PA_UART + 0x800)
+#define S3C_PA_UART3 (S5PC100_PA_UART + 0xC00)
+#define S3C_VA_UART0 (S3C_VA_UART + 0x0)
+#define S3C_VA_UART1 (S3C_VA_UART + 0x400)
+#define S3C_VA_UART2 (S3C_VA_UART + 0x800)
+#define S3C_VA_UART3 (S3C_VA_UART + 0xC00)
+#define S3C_UART_OFFSET 0x400
+#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x0)
+#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
+#define S3C_VA_VIC2 (S3C_VA_IRQ + 0x20000)
+#define S3C_PA_IIC S5PC100_PA_IIC
+
+#endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h
new file mode 100644
index 0000000..4b60d18
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/memory.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5pc100/include/mach/memory.h
+ *
+ * Copyright 2008 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x20000000)
+
+#endif
diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
new file mode 100644
index 0000000..b34d2f7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - pwm clock and timer support
+ *
+ * Based on mach-s3c6400/include/mach/pwm-clock.h
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+ return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+ return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+ return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+ return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
new file mode 100644
index 0000000..751ac15
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <mach/map.h>
+#include <asm/hardware/vic.h>
+
+/* interrupt controller */
+#define S5PC1XX_VIC0REG(x) ((x) + S5PC1XX_VA_VIC(0))
+#define S5PC1XX_VIC1REG(x) ((x) + S5PC1XX_VA_VIC(1))
+#define S5PC1XX_VIC2REG(x) ((x) + S5PC1XX_VA_VIC(2))
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
new file mode 100644
index 0000000..e390143
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/system.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - system implementation
+ *
+ * Based on mach-s3c6400/include/mach/system.h
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+ /* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+ /* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
new file mode 100644
index 0000000..d3de0f3
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * Based on mach-s3c6400/include/mach/tick.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+ u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
+ return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0));
+}
+
+#define TICK_MAX (0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/uncompress.h b/arch/arm/mach-s5pc100/include/mach/uncompress.h
new file mode 100644
index 0000000..01ccf53
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/uncompress.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s5pc100/include/mach/uncompress.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - uncompress code
+ *
+ * Based on mach-s3c6400/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+ /* we do not need to do any cpu detection here at the moment. */
+ fifo_mask = S3C2440_UFSTAT_TXMASK;
+ fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
new file mode 100644
index 0000000..214093c
--- /dev/null
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -0,0 +1,103 @@
+/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Author: Byungho Min <bhmin@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/s5pc100.h>
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+};
+
+static struct map_desc smdkc100_iodesc[] = {};
+
+static struct platform_device *smdkc100_devices[] __initdata = {
+};
+
+static void __init smdkc100_map_io(void)
+{
+ s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
+}
+
+static void __init smdkc100_machine_init(void)
+{
+ platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
+}
+
+MACHINE_START(SMDKC100, "SMDKC100")
+ /* Maintainer: Byungho Min <bhmin@samsung.com> */
+ .phys_io = S5PC1XX_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S5PC100_PA_SDRAM + 0x100,
+
+ .init_irq = s5pc100_init_irq,
+ .map_io = smdkc100_map_io,
+ .init_machine = smdkc100_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 935c755..8931c5f 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -198,4 +198,9 @@ config S3C_DEV_USB_HSOTG
help
Compile in platform device definition for USB high-speed OtG
+config S3C_DEV_NAND
+ bool
+ help
+ Compile in platform device definition for NAND controller
+
endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 0761766..3c09109 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -28,13 +28,17 @@ obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += pm-gpio.o
obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o
+# PWM support
+
+obj-$(CONFIG_HAVE_PWM) += pwm.o
+
# devices
obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
-obj-$(CONFIG_SND_S3C64XX_SOC_I2S) += dev-audio.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
+obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
new file mode 100644
index 0000000..4e53237
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -0,0 +1,30 @@
+/*
+ * S3C series device definition for nand device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+
+static struct resource s3c_nand_resource[] = {
+ [0] = {
+ .start = S3C_PA_NAND,
+ .end = S3C_PA_NAND + SZ_1M,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+struct platform_device s3c_device_nand = {
+ .name = "s3c2410-nand",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_nand_resource),
+ .resource = s3c_nand_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_nand);
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index d847bd4..5f3b1cd 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -19,10 +19,14 @@ struct s3c_adc_client;
extern int s3c_adc_start(struct s3c_adc_client *client,
unsigned int channel, unsigned int nr_samples);
+extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch);
+
extern struct s3c_adc_client *
s3c_adc_register(struct platform_device *pdev,
- void (*select)(unsigned selected),
- void (*conv)(unsigned d0, unsigned d1,
+ void (*select)(struct s3c_adc_client *client,
+ unsigned selected),
+ void (*conv)(struct s3c_adc_client *client,
+ unsigned d0, unsigned d1,
unsigned *samples_left),
unsigned int is_ts);
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index c86a133..7b982b7 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -17,6 +17,21 @@ struct s3c_cpufreq_info;
struct s3c_cpufreq_board;
struct s3c_iotimings;
+/**
+ * struct s3c_freq - frequency information (mainly for core drivers)
+ * @fclk: The FCLK frequency in Hz.
+ * @armclk: The ARMCLK frequency in Hz.
+ * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
+ * @hclk: The HCLK frequency in Hz.
+ * @pclk: The PCLK frequency in Hz.
+ *
+ * This contains the frequency information about the current configuration
+ * mainly for the core drivers to ensure we do not end up passing about
+ * a large number of parameters.
+ *
+ * The @hclk_tns field is a useful cache for the parts of the drivers that
+ * need to calculate IO timings and suchlike.
+ */
struct s3c_freq {
unsigned long fclk;
unsigned long armclk;
@@ -25,48 +40,84 @@ struct s3c_freq {
unsigned long pclk;
};
-/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the
+/**
+ * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
+ * @freqs: The cpufreq setting information.
+ * @old: The old clock settings.
+ * @new: The new clock settings.
+ * @pll_changing: Set if the PLL is changing.
+ *
+ * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
* notification can use this information that is not provided by just
* having the core frequency alone.
+ *
+ * The pll_changing flag is used to indicate if the PLL itself is
+ * being set during this change. This is important as the clocks
+ * will temporarily be set to the XTAL clock during this time, so
+ * drivers may want to close down their output during this time.
+ *
+ * Note, this is not being used by any current drivers and therefore
+ * may be removed in the future.
*/
-
struct s3c_cpufreq_freqs {
struct cpufreq_freqs freqs;
struct s3c_freq old;
struct s3c_freq new;
+
+ unsigned int pll_changing:1;
};
#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
+/**
+ * struct s3c_clkdivs - clock divisor information
+ * @p_divisor: Divisor from FCLK to PCLK.
+ * @h_divisor: Divisor from FCLK to HCLK.
+ * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
+ * @dvs: Non-zero if using DVS mode for ARMCLK.
+ *
+ * Divisor settings for the core clocks.
+ */
struct s3c_clkdivs {
- int p_divisor; /* fclk / pclk */
- int h_divisor; /* fclk / hclk */
- int arm_divisor; /* not all cpus have this. */
- unsigned char dvs; /* using dvs mode to arm. */
+ int p_divisor;
+ int h_divisor;
+ int arm_divisor;
+ unsigned char dvs;
};
#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
+/**
+ * struct s3c_pllval - PLL value entry.
+ * @freq: The frequency for this entry in Hz.
+ * @pll_reg: The PLL register setting for this PLL value.
+ */
struct s3c_pllval {
unsigned long freq;
unsigned long pll_reg;
};
-struct s3c_cpufreq_config {
- struct s3c_freq freq;
- struct s3c_pllval pll;
- struct s3c_clkdivs divs;
- struct s3c_cpufreq_info *info; /* for core, not drivers */
- struct s3c_cpufreq_board *board;
-};
-
-/* s3c_cpufreq_board
+/**
+ * struct s3c_cpufreq_board - per-board cpu frequency informatin
+ * @refresh: The SDRAM refresh period in nanoseconds.
+ * @auto_io: Set if the IO timing settings should be generated from the
+ * initialisation time hardware registers.
+ * @need_io: Set if the board has external IO on any of the chipselect
+ * lines that will require the hardware timing registers to be
+ * updated on a clock change.
+ * @max: The maxium frequency limits for the system. Any field that
+ * is left at zero will use the CPU's settings.
+ *
+ * This contains the board specific settings that affect how the CPU
+ * drivers chose settings. These include the memory refresh and IO
+ * timing information.
*
- * per-board configuraton information, such as memory refresh and
- * how to initialise IO timings.
+ * Registration depends on the driver being used, the ARMCLK only
+ * implementation does not currently need this but the older style
+ * driver requires this to be available.
*/
struct s3c_cpufreq_board {
- unsigned int refresh; /* refresh period in ns */
+ unsigned int refresh;
unsigned int auto_io:1; /* automatically init io timings. */
unsigned int need_io:1; /* set if needs io timing support. */
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index be541cb..fbc3d49 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -65,6 +65,7 @@ extern struct sys_timer s3c24xx_timer;
/* system device classes */
extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2410a_sysclass;
extern struct sysdev_class s3c2412_sysclass;
extern struct sysdev_class s3c2440_sysclass;
extern struct sysdev_class s3c2442_sysclass;
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 2e17082..0f540ea 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -46,6 +46,8 @@ extern struct platform_device s3c_device_hsmmc2;
extern struct platform_device s3c_device_spi0;
extern struct platform_device s3c_device_spi1;
+extern struct platform_device s3c_device_hwmon;
+
extern struct platform_device s3c_device_nand;
extern struct platform_device s3c_device_usbgadget;
@@ -56,5 +58,6 @@ extern struct platform_device s3c_device_usb_hsotg;
#ifdef CONFIG_CPU_S3C2440
extern struct platform_device s3c_device_camif;
+extern struct platform_device s3c_device_ac97;
#endif
diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-s3c/include/plat/hwmon.h
new file mode 100644
index 0000000..1ba88ea
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/hwmon.h
@@ -0,0 +1,41 @@
+/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
+ *
+ * Copyright 2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C - HWMon interface for ADC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ADC_HWMON_H
+#define __ASM_ARCH_ADC_HWMON_H __FILE__
+
+/**
+ * s3c_hwmon_chcfg - channel configuration
+ * @name: The name to give this channel.
+ * @mult: Multiply the ADC value read by this.
+ * @div: Divide the value from the ADC by this.
+ *
+ * The value read from the ADC is converted to a value that
+ * hwmon expects (mV) by result = (value_read * @mult) / @div.
+ */
+struct s3c_hwmon_chcfg {
+ const char *name;
+ unsigned int mult;
+ unsigned int div;
+};
+
+/**
+ * s3c_hwmon_pdata - HWMON platform data
+ * @in: One configuration for each possible channel used.
+ */
+struct s3c_hwmon_pdata {
+ struct s3c_hwmon_chcfg *in[8];
+};
+
+#endif /* __ASM_ARCH_ADC_HWMON_H */
+
diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-s3c/include/plat/map-base.h
index b84289d..250be31 100644
--- a/arch/arm/plat-s3c/include/plat/map-base.h
+++ b/arch/arm/plat-s3c/include/plat/map-base.h
@@ -32,9 +32,15 @@
#define S3C_VA_IRQ S3C_ADDR(0x00000000) /* irq controller(s) */
#define S3C_VA_SYS S3C_ADDR(0x00100000) /* system control */
-#define S3C_VA_MEM S3C_ADDR(0x00200000) /* system control */
+#define S3C_VA_MEM S3C_ADDR(0x00200000) /* memory control */
#define S3C_VA_TIMER S3C_ADDR(0x00300000) /* timer block */
#define S3C_VA_WATCHDOG S3C_ADDR(0x00400000) /* watchdog */
#define S3C_VA_UART S3C_ADDR(0x01000000) /* UART */
+/* This is used for the CPU specific mappings that may be needed, so that
+ * they do not need to directly used S3C_ADDR() and thus make it easier to
+ * modify the space for mapping.
+ */
+#define S3C_ADDR_CPU(x) S3C_ADDR(0x00500000 + (x))
+
#endif /* __ASM_PLAT_MAP_H */
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c/pwm.c
index 0120b76..f3d37ac 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c/pwm.c
@@ -1,10 +1,10 @@
-/* arch/arm/plat-s3c24xx/pwm.c
+/* arch/arm/plat-s3c/pwm.c
*
* Copyright (c) 2007 Ben Dooks
* Copyright (c) 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
*
- * S3C24XX PWM device core
+ * S3C series PWM device core
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -20,6 +20,7 @@
#include <linux/pwm.h>
#include <mach/irqs.h>
+#include <mach/map.h>
#include <plat/devs.h>
#include <plat/regs-timer.h>
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5b0bc91..9c7aca4 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -10,6 +10,7 @@ config PLAT_S3C24XX
default y
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
+ select S3C_DEVICE_NAND
help
Base platform code for any Samsung S3C24XX device
@@ -34,6 +35,40 @@ config CPU_S3C244X
help
Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+config S3C2440_CPUFREQ
+ bool "S3C2440/S3C2442 CPU Frequency scaling support"
+ depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+ select S3C2410_CPUFREQ_UTILS
+ default y
+ help
+ CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config S3C2440_XTAL_12000000
+ bool
+ help
+ Indicate that the build needs to support 12MHz system
+ crystal.
+
+config S3C2440_XTAL_16934400
+ bool
+ help
+ Indicate that the build needs to support 16.9344MHz system
+ crystal.
+
+config S3C2440_PLL_12000000
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
config S3C24XX_PWM
bool "PWM device support"
select HAVE_PWM
@@ -105,8 +140,39 @@ config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
SPI GPIO configuration code for BUS 1 when connected to
GPG5, GPG6 and GPG7.
+config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10
+ bool
+ help
+ SPI GPIO configuration code for BUS 1 when connected to
+ GPD8, GPD9 and GPD10.
+
# common code for s3c24xx based machines, such as the SMDKs.
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+ bool
+ depends on CPU_FREQ_S3C24XX
+ help
+ Internal node to select io timing code that is common to the s3c2410
+ and s3c2440/s3c2442 cpu frequency support.
+
+config S3C2410_CPUFREQ_UTILS
+ bool
+ depends on CPU_FREQ_S3C24XX
+ help
+ Internal node to select timing code that is common to the s3c2410
+ and s3c2440/s3c244 cpu frequency support.
+
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+ bool
+ depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+ help
+ Intel node to select io timing code that is common to the s3c2412
+ and the s3c2443.
+
config MACH_SMDK
bool
help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165..7780d2d 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -20,19 +20,28 @@ obj-y += gpiolib.o
obj-y += clock.o
obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX) += cpu-freq.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
+
# Architecture dependant builds
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
obj-$(CONFIG_PM) += sleep.o
-obj-$(CONFIG_S3C24XX_PWM) += pwm.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
obj-$(CONFIG_S3C2410_DMA) += dma.o
obj-$(CONFIG_S3C24XX_ADC) += adc.o
+obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o
+obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o
+obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
# device specific setup and/or initialisation
obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o
@@ -41,6 +50,7 @@ obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o
obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7) += spi-bus1-gpg5_6_7.o
+obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10) += spi-bus1-gpd8_9_10.o
# machine common support
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index ee1baf1..11117a7 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -39,13 +39,16 @@
struct s3c_adc_client {
struct platform_device *pdev;
struct list_head pend;
+ wait_queue_head_t *wait;
unsigned int nr_samples;
+ int result;
unsigned char is_ts;
unsigned char channel;
- void (*select_cb)(unsigned selected);
- void (*convert_cb)(unsigned val1, unsigned val2,
+ void (*select_cb)(struct s3c_adc_client *c, unsigned selected);
+ void (*convert_cb)(struct s3c_adc_client *c,
+ unsigned val1, unsigned val2,
unsigned *samples_left);
};
@@ -81,7 +84,7 @@ static inline void s3c_adc_select(struct adc_device *adc,
{
unsigned con = readl(adc->regs + S3C2410_ADCCON);
- client->select_cb(1);
+ client->select_cb(client, 1);
con &= ~S3C2410_ADCCON_MUXMASK;
con &= ~S3C2410_ADCCON_STDBM;
@@ -153,25 +156,61 @@ int s3c_adc_start(struct s3c_adc_client *client,
}
EXPORT_SYMBOL_GPL(s3c_adc_start);
-static void s3c_adc_default_select(unsigned select)
+static void s3c_convert_done(struct s3c_adc_client *client,
+ unsigned v, unsigned u, unsigned *left)
+{
+ client->result = v;
+ wake_up(client->wait);
+}
+
+int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
+{
+ DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+ int ret;
+
+ client->convert_cb = s3c_convert_done;
+ client->wait = &wake;
+ client->result = -1;
+
+ ret = s3c_adc_start(client, ch, 1);
+ if (ret < 0)
+ goto err;
+
+ ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
+ if (client->result < 0) {
+ ret = -ETIMEDOUT;
+ goto err;
+ }
+
+ client->convert_cb = NULL;
+ return client->result;
+
+err:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_convert);
+
+static void s3c_adc_default_select(struct s3c_adc_client *client,
+ unsigned select)
{
}
struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
- void (*select)(unsigned int selected),
- void (*conv)(unsigned d0, unsigned d1,
+ void (*select)(struct s3c_adc_client *client,
+ unsigned int selected),
+ void (*conv)(struct s3c_adc_client *client,
+ unsigned d0, unsigned d1,
unsigned *samples_left),
unsigned int is_ts)
{
struct s3c_adc_client *client;
WARN_ON(!pdev);
- WARN_ON(!conv);
if (!select)
select = s3c_adc_default_select;
- if (!conv || !pdev)
+ if (!pdev)
return ERR_PTR(-EINVAL);
client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
@@ -230,16 +269,19 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
client->nr_samples--;
- (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
+
+ if (client->convert_cb)
+ (client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff,
+ &client->nr_samples);
if (client->nr_samples > 0) {
/* fire another conversion for this */
- client->select_cb(1);
+ client->select_cb(client, 1);
s3c_adc_convert(adc);
} else {
local_irq_save(flags);
- (client->select_cb)(0);
+ (client->select_cb)(client, 0);
adc->cur = NULL;
s3c_adc_try(adc);
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
new file mode 100644
index 0000000..a927666
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
@@ -0,0 +1,199 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - debugfs status support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+
+#include <plat/cpu-freq-core.h>
+
+static struct dentry *dbgfs_root;
+static struct dentry *dbgfs_file_io;
+static struct dentry *dbgfs_file_info;
+static struct dentry *dbgfs_file_board;
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+static void show_max(struct seq_file *seq, struct s3c_freq *f)
+{
+ seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
+ f->fclk, f->hclk, f->pclk, f->armclk);
+}
+
+static int board_show(struct seq_file *seq, void *p)
+{
+ struct s3c_cpufreq_config *cfg;
+ struct s3c_cpufreq_board *brd;
+
+ cfg = s3c_cpufreq_getconfig();
+ if (!cfg) {
+ seq_printf(seq, "no configuration registered\n");
+ return 0;
+ }
+
+ brd = cfg->board;
+ if (!brd) {
+ seq_printf(seq, "no board definition set?\n");
+ return 0;
+ }
+
+ seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
+ seq_printf(seq, "auto_io=%u\n", brd->auto_io);
+ seq_printf(seq, "need_io=%u\n", brd->need_io);
+
+ show_max(seq, &brd->max);
+
+
+ return 0;
+}
+
+static int fops_board_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, board_show, NULL);
+}
+
+static const struct file_operations fops_board = {
+ .open = fops_board_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int info_show(struct seq_file *seq, void *p)
+{
+ struct s3c_cpufreq_config *cfg;
+
+ cfg = s3c_cpufreq_getconfig();
+ if (!cfg) {
+ seq_printf(seq, "no configuration registered\n");
+ return 0;
+ }
+
+ seq_printf(seq, " FCLK %ld Hz\n", cfg->freq.fclk);
+ seq_printf(seq, " HCLK %ld Hz (%lu.%lu ns)\n",
+ cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
+ seq_printf(seq, " PCLK %ld Hz\n", cfg->freq.hclk);
+ seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
+ seq_printf(seq, "\n");
+
+ show_max(seq, &cfg->max);
+
+ seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
+ cfg->divs.h_divisor, cfg->divs.p_divisor,
+ cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
+ seq_printf(seq, "\n");
+
+ seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
+
+ return 0;
+}
+
+static int fops_info_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, info_show, NULL);
+}
+
+static const struct file_operations fops_info = {
+ .open = fops_info_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int io_show(struct seq_file *seq, void *p)
+{
+ void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
+ struct s3c_cpufreq_config *cfg;
+ struct s3c_iotimings *iot;
+ union s3c_iobank *iob;
+ int bank;
+
+ cfg = s3c_cpufreq_getconfig();
+ if (!cfg) {
+ seq_printf(seq, "no configuration registered\n");
+ return 0;
+ }
+
+ show_bank = cfg->info->debug_io_show;
+ if (!show_bank) {
+ seq_printf(seq, "no code to show bank timing\n");
+ return 0;
+ }
+
+ iot = s3c_cpufreq_getiotimings();
+ if (!iot) {
+ seq_printf(seq, "no io timings registered\n");
+ return 0;
+ }
+
+ seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ iob = &iot->bank[bank];
+
+ seq_printf(seq, "bank %d: ", bank);
+
+ if (!iob->io_2410) {
+ seq_printf(seq, "nothing set\n");
+ continue;
+ }
+
+ show_bank(seq, cfg, iob);
+ }
+
+ return 0;
+}
+
+static int fops_io_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, io_show, NULL);
+}
+
+static const struct file_operations fops_io = {
+ .open = fops_io_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+
+static int __init s3c_freq_debugfs_init(void)
+{
+ dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
+ if (IS_ERR(dbgfs_root)) {
+ printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
+ return PTR_ERR(dbgfs_root);
+ }
+
+ dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
+ NULL, &fops_io);
+
+ dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
+ NULL, &fops_info);
+
+ dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
+ NULL, &fops_board);
+
+ return 0;
+}
+
+late_initcall(s3c_freq_debugfs_init);
+
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
new file mode 100644
index 0000000..4f1b789
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -0,0 +1,716 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
+ *
+ * Copyright (c) 2006,2007,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+#include <mach/regs-clock.h>
+
+/* note, cpufreq support deals in kHz, no Hz */
+
+static struct cpufreq_driver s3c24xx_driver;
+static struct s3c_cpufreq_config cpu_cur;
+static struct s3c_iotimings s3c24xx_iotiming;
+static struct cpufreq_frequency_table *pll_reg;
+static unsigned int last_target = ~0;
+static unsigned int ftab_size;
+static struct cpufreq_frequency_table *ftab;
+
+static struct clk *_clk_mpll;
+static struct clk *_clk_xtal;
+static struct clk *clk_fclk;
+static struct clk *clk_hclk;
+static struct clk *clk_pclk;
+static struct clk *clk_arm;
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
+{
+ return &cpu_cur;
+}
+
+struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
+{
+ return &s3c24xx_iotiming;
+}
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
+
+static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long fclk, pclk, hclk, armclk;
+
+ cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
+ cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
+ cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
+ cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
+
+ cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
+ cfg->pll.frequency = fclk;
+
+ cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+
+ cfg->divs.h_divisor = fclk / hclk;
+ cfg->divs.p_divisor = fclk / pclk;
+}
+
+static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long pll = cfg->pll.frequency;
+
+ cfg->freq.fclk = pll;
+ cfg->freq.hclk = pll / cfg->divs.h_divisor;
+ cfg->freq.pclk = pll / cfg->divs.p_divisor;
+
+ /* convert hclk into 10ths of nanoseconds for io calcs */
+ cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+}
+
+static inline int closer(unsigned int target, unsigned int n, unsigned int c)
+{
+ int diff_cur = abs(target - c);
+ int diff_new = abs(target - n);
+
+ return (diff_new < diff_cur);
+}
+
+static void s3c_cpufreq_show(const char *pfx,
+ struct s3c_cpufreq_config *cfg)
+{
+ s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
+ pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
+ cfg->freq.hclk, cfg->divs.h_divisor,
+ cfg->freq.pclk, cfg->divs.p_divisor);
+}
+
+/* functions to wrapper the driver info calls to do the cpu specific work */
+
+static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
+{
+ if (cfg->info->set_iotiming)
+ (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
+}
+
+static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
+{
+ if (cfg->info->calc_iotiming)
+ return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
+
+ return 0;
+}
+
+static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ (cfg->info->set_refresh)(cfg);
+}
+
+static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+ (cfg->info->set_divs)(cfg);
+}
+
+static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+ return (cfg->info->calc_divs)(cfg);
+}
+
+static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
+{
+ (cfg->info->set_fvco)(cfg);
+}
+
+static inline void s3c_cpufreq_resume_clocks(void)
+{
+ cpu_cur.info->resume_clocks();
+}
+
+static inline void s3c_cpufreq_updateclk(struct clk *clk,
+ unsigned int freq)
+{
+ clk_set_rate(clk, freq);
+}
+
+static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ struct cpufreq_frequency_table *pll)
+{
+ struct s3c_cpufreq_freqs freqs;
+ struct s3c_cpufreq_config cpu_new;
+ unsigned long flags;
+
+ cpu_new = cpu_cur; /* copy new from current */
+
+ s3c_cpufreq_show("cur", &cpu_cur);
+
+ /* TODO - check for DMA currently outstanding */
+
+ cpu_new.pll = pll ? *pll : cpu_cur.pll;
+
+ if (pll)
+ freqs.pll_changing = 1;
+
+ /* update our frequencies */
+
+ cpu_new.freq.armclk = target_freq;
+ cpu_new.freq.fclk = cpu_new.pll.frequency;
+
+ if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
+ printk(KERN_ERR "no divisors for %d\n", target_freq);
+ goto err_notpossible;
+ }
+
+ s3c_freq_dbg("%s: got divs\n", __func__);
+
+ s3c_cpufreq_calc(&cpu_new);
+
+ s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
+
+ if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
+ if (s3c_cpufreq_calcio(&cpu_new) < 0) {
+ printk(KERN_ERR "%s: no IO timings\n", __func__);
+ goto err_notpossible;
+ }
+ }
+
+ s3c_cpufreq_show("new", &cpu_new);
+
+ /* setup our cpufreq parameters */
+
+ freqs.old = cpu_cur.freq;
+ freqs.new = cpu_new.freq;
+
+ freqs.freqs.cpu = 0;
+ freqs.freqs.old = cpu_cur.freq.armclk / 1000;
+ freqs.freqs.new = cpu_new.freq.armclk / 1000;
+
+ /* update f/h/p clock settings before we issue the change
+ * notification, so that drivers do not need to do anything
+ * special if they want to recalculate on CPUFREQ_PRECHANGE. */
+
+ s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
+ s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
+ s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
+ s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
+
+ /* start the frequency change */
+
+ if (policy)
+ cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE);
+
+ /* If hclk is staying the same, then we do not need to
+ * re-write the IO or the refresh timings whilst we are changing
+ * speed. */
+
+ local_irq_save(flags);
+
+ /* is our memory clock slowing down? */
+ if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
+ s3c_cpufreq_setrefresh(&cpu_new);
+ s3c_cpufreq_setio(&cpu_new);
+ }
+
+ if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
+ /* not changing PLL, just set the divisors */
+
+ s3c_cpufreq_setdivs(&cpu_new);
+ } else {
+ if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
+ /* slow the cpu down, then set divisors */
+
+ s3c_cpufreq_setfvco(&cpu_new);
+ s3c_cpufreq_setdivs(&cpu_new);
+ } else {
+ /* set the divisors, then speed up */
+
+ s3c_cpufreq_setdivs(&cpu_new);
+ s3c_cpufreq_setfvco(&cpu_new);
+ }
+ }
+
+ /* did our memory clock speed up */
+ if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
+ s3c_cpufreq_setrefresh(&cpu_new);
+ s3c_cpufreq_setio(&cpu_new);
+ }
+
+ /* update our current settings */
+ cpu_cur = cpu_new;
+
+ local_irq_restore(flags);
+
+ /* notify everyone we've done this */
+ if (policy)
+ cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE);
+
+ s3c_freq_dbg("%s: finished\n", __func__);
+ return 0;
+
+ err_notpossible:
+ printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+ return -EINVAL;
+}
+
+/* s3c_cpufreq_target
+ *
+ * called by the cpufreq core to adjust the frequency that the CPU
+ * is currently running at.
+ */
+
+static int s3c_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct cpufreq_frequency_table *pll;
+ unsigned int index;
+
+ /* avoid repeated calls which cause a needless amout of duplicated
+ * logging output (and CPU time as the calculation process is
+ * done) */
+ if (target_freq == last_target)
+ return 0;
+
+ last_target = target_freq;
+
+ s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
+ __func__, policy, target_freq, relation);
+
+ if (ftab) {
+ if (cpufreq_frequency_table_target(policy, ftab,
+ target_freq, relation,
+ &index)) {
+ s3c_freq_dbg("%s: table failed\n", __func__);
+ return -EINVAL;
+ }
+
+ s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
+ target_freq, index, ftab[index].frequency);
+ target_freq = ftab[index].frequency;
+ }
+
+ target_freq *= 1000; /* convert target to Hz */
+
+ /* find the settings for our new frequency */
+
+ if (!pll_reg || cpu_cur.lock_pll) {
+ /* either we've not got any PLL values, or we've locked
+ * to the current one. */
+ pll = NULL;
+ } else {
+ struct cpufreq_policy tmp_policy;
+ int ret;
+
+ /* we keep the cpu pll table in Hz, to ensure we get an
+ * accurate value for the PLL output. */
+
+ tmp_policy.min = policy->min * 1000;
+ tmp_policy.max = policy->max * 1000;
+ tmp_policy.cpu = policy->cpu;
+
+ /* cpufreq_frequency_table_target uses a pointer to 'index'
+ * which is the number of the table entry, not the value of
+ * the table entry's index field. */
+
+ ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
+ target_freq, relation,
+ &index);
+
+ if (ret < 0) {
+ printk(KERN_ERR "%s: no PLL available\n", __func__);
+ goto err_notpossible;
+ }
+
+ pll = pll_reg + index;
+
+ s3c_freq_dbg("%s: target %u => %u\n",
+ __func__, target_freq, pll->frequency);
+
+ target_freq = pll->frequency;
+ }
+
+ return s3c_cpufreq_settarget(policy, target_freq, pll);
+
+ err_notpossible:
+ printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+ return -EINVAL;
+}
+
+static unsigned int s3c_cpufreq_get(unsigned int cpu)
+{
+ return clk_get_rate(clk_arm) / 1000;
+}
+
+struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
+{
+ struct clk *clk;
+
+ clk = clk_get(dev, name);
+ if (IS_ERR(clk))
+ printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
+
+ return clk;
+}
+
+static int s3c_cpufreq_init(struct cpufreq_policy *policy)
+{
+ printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ policy->cur = s3c_cpufreq_get(0);
+ policy->min = policy->cpuinfo.min_freq = 0;
+ policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ /* feed the latency information from the cpu driver */
+ policy->cpuinfo.transition_latency = cpu_cur.info->latency;
+
+ if (ftab)
+ cpufreq_frequency_table_cpuinfo(policy, ftab);
+
+ return 0;
+}
+
+static __init int s3c_cpufreq_initclks(void)
+{
+ _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
+ _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+ clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+ clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+ clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
+ clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
+
+ if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
+ IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
+ printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
+ return -ENOENT;
+ }
+
+ printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
+ clk_get_rate(clk_fclk) / 1000,
+ clk_get_rate(clk_hclk) / 1000,
+ clk_get_rate(clk_pclk) / 1000,
+ clk_get_rate(clk_arm) / 1000);
+
+ return 0;
+}
+
+static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
+{
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static struct cpufreq_frequency_table suspend_pll;
+static unsigned int suspend_freq;
+
+static int s3c_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
+{
+ suspend_pll.frequency = clk_get_rate(_clk_mpll);
+ suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
+ suspend_freq = s3c_cpufreq_get(0) * 1000;
+
+ return 0;
+}
+
+static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
+{
+ int ret;
+
+ s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
+
+ last_target = ~0; /* invalidate last_target setting */
+
+ /* first, find out what speed we resumed at. */
+ s3c_cpufreq_resume_clocks();
+
+ /* whilst we will be called later on, we try and re-set the
+ * cpu frequencies as soon as possible so that we do not end
+ * up resuming devices and then immediatley having to re-set
+ * a number of settings once these devices have restarted.
+ *
+ * as a note, it is expected devices are not used until they
+ * have been un-suspended and at that time they should have
+ * used the updated clock settings.
+ */
+
+ ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
+ if (ret) {
+ printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
+ return ret;
+ }
+
+ return 0;
+}
+#else
+#define s3c_cpufreq_resume NULL
+#define s3c_cpufreq_suspend NULL
+#endif
+
+static struct cpufreq_driver s3c24xx_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = s3c_cpufreq_verify,
+ .target = s3c_cpufreq_target,
+ .get = s3c_cpufreq_get,
+ .init = s3c_cpufreq_init,
+ .suspend = s3c_cpufreq_suspend,
+ .resume = s3c_cpufreq_resume,
+ .name = "s3c24xx",
+};
+
+
+int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
+{
+ if (!info || !info->name) {
+ printk(KERN_ERR "%s: failed to pass valid information\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
+ info->name);
+
+ /* check our driver info has valid data */
+
+ BUG_ON(info->set_refresh == NULL);
+ BUG_ON(info->set_divs == NULL);
+ BUG_ON(info->calc_divs == NULL);
+
+ /* info->set_fvco is optional, depending on whether there
+ * is a need to set the clock code. */
+
+ cpu_cur.info = info;
+
+ /* Note, driver registering should probably update locktime */
+
+ return 0;
+}
+
+int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+ struct s3c_cpufreq_board *ours;
+
+ if (!board) {
+ printk(KERN_INFO "%s: no board data\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Copy the board information so that each board can make this
+ * initdata. */
+
+ ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
+ if (ours == NULL) {
+ printk(KERN_ERR "%s: no memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ *ours = *board;
+ cpu_cur.board = ours;
+
+ return 0;
+}
+
+int __init s3c_cpufreq_auto_io(void)
+{
+ int ret;
+
+ if (!cpu_cur.info->get_iotiming) {
+ printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
+ return -ENOENT;
+ }
+
+ printk(KERN_INFO "%s: working out IO settings\n", __func__);
+
+ ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
+ if (ret)
+ printk(KERN_ERR "%s: failed to get timings\n", __func__);
+
+ return ret;
+}
+
+/* if one or is zero, then return the other, otherwise return the min */
+#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
+
+/**
+ * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
+ * @dst: The destination structure
+ * @a: One argument.
+ * @b: The other argument.
+ *
+ * Create a minimum of each frequency entry in the 'struct s3c_freq',
+ * unless the entry is zero when it is ignored and the non-zero argument
+ * used.
+ */
+static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
+ struct s3c_freq *a, struct s3c_freq *b)
+{
+ dst->fclk = do_min(a->fclk, b->fclk);
+ dst->hclk = do_min(a->hclk, b->hclk);
+ dst->pclk = do_min(a->pclk, b->pclk);
+ dst->armclk = do_min(a->armclk, b->armclk);
+}
+
+static inline u32 calc_locktime(u32 freq, u32 time_us)
+{
+ u32 result;
+
+ result = freq * time_us;
+ result = DIV_ROUND_UP(result, 1000 * 1000);
+
+ return result;
+}
+
+static void s3c_cpufreq_update_loctkime(void)
+{
+ unsigned int bits = cpu_cur.info->locktime_bits;
+ u32 rate = (u32)clk_get_rate(_clk_xtal);
+ u32 val;
+
+ if (bits == 0) {
+ WARN_ON(1);
+ return;
+ }
+
+ val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
+ val |= calc_locktime(rate, cpu_cur.info->locktime_m);
+
+ printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
+ __raw_writel(val, S3C2410_LOCKTIME);
+}
+
+static int s3c_cpufreq_build_freq(void)
+{
+ int size, ret;
+
+ if (!cpu_cur.info->calc_freqtable)
+ return -EINVAL;
+
+ kfree(ftab);
+ ftab = NULL;
+
+ size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
+ size++;
+
+ ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
+ if (!ftab) {
+ printk(KERN_ERR "%s: no memory for tables\n", __func__);
+ return -ENOMEM;
+ }
+
+ ftab_size = size;
+
+ ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
+ s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
+
+ return 0;
+}
+
+static int __init s3c_cpufreq_initcall(void)
+{
+ int ret = 0;
+
+ if (cpu_cur.info && cpu_cur.board) {
+ ret = s3c_cpufreq_initclks();
+ if (ret)
+ goto out;
+
+ /* get current settings */
+ s3c_cpufreq_getcur(&cpu_cur);
+ s3c_cpufreq_show("cur", &cpu_cur);
+
+ if (cpu_cur.board->auto_io) {
+ ret = s3c_cpufreq_auto_io();
+ if (ret) {
+ printk(KERN_ERR "%s: failed to get io timing\n",
+ __func__);
+ goto out;
+ }
+ }
+
+ if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
+ printk(KERN_ERR "%s: no IO support registered\n",
+ __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (!cpu_cur.info->need_pll)
+ cpu_cur.lock_pll = 1;
+
+ s3c_cpufreq_update_loctkime();
+
+ s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
+ &cpu_cur.info->max);
+
+ if (cpu_cur.info->calc_freqtable)
+ s3c_cpufreq_build_freq();
+
+ ret = cpufreq_register_driver(&s3c24xx_driver);
+ }
+
+ out:
+ return ret;
+}
+
+late_initcall(s3c_cpufreq_initcall);
+
+/**
+ * s3c_plltab_register - register CPU PLL table.
+ * @plls: The list of PLL entries.
+ * @plls_no: The size of the PLL entries @plls.
+ *
+ * Register the given set of PLLs with the system.
+ */
+int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
+ unsigned int plls_no)
+{
+ struct cpufreq_frequency_table *vals;
+ unsigned int size;
+
+ size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
+
+ vals = kmalloc(size, GFP_KERNEL);
+ if (vals) {
+ memcpy(vals, plls, size);
+ pll_reg = vals;
+
+ /* write a terminating entry, we don't store it in the
+ * table that is stored in the kernel */
+ vals += plls_no;
+ vals->frequency = CPUFREQ_TABLE_END;
+
+ printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
+ } else
+ printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
+
+ return vals ? 0 : -ENOMEM;
+}
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 1932b7e..5447e60 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -81,7 +81,7 @@ static struct cpu_table cpu_ids[] __initdata = {
.map_io = s3c2410_map_io,
.init_clocks = s3c2410_init_clocks,
.init_uarts = s3c2410_init_uarts,
- .init = s3c2410_init,
+ .init = s3c2410a_init,
.name = name_s3c2410a
},
{
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c..f52a92c 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -26,6 +26,8 @@
#include <asm/mach/irq.h>
#include <mach/fb.h>
#include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
#include <asm/irq.h>
#include <plat/regs-serial.h>
@@ -180,25 +182,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
}
}
-/* NAND Controller */
-
-static struct resource s3c_nand_resource[] = {
- [0] = {
- .start = S3C24XX_PA_NAND,
- .end = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-struct platform_device s3c_device_nand = {
- .name = "s3c2410-nand",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_nand_resource),
- .resource = s3c_nand_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_nand);
-
/* USB Device (Gadget)*/
static struct resource s3c_usbgadget_resource[] = {
@@ -348,7 +331,7 @@ struct platform_device s3c_device_adc = {
/* HWMON */
struct platform_device s3c_device_hwmon = {
- .name = "s3c24xx-hwmon",
+ .name = "s3c-hwmon",
.id = -1,
.dev.parent = &s3c_device_adc.dev,
};
@@ -473,4 +456,52 @@ struct platform_device s3c_device_camif = {
EXPORT_SYMBOL(s3c_device_camif);
+/* AC97 */
+
+static struct resource s3c_ac97_resource[] = {
+ [0] = {
+ .start = S3C2440_PA_AC97,
+ .end = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3C244x_AC97,
+ .end = IRQ_S3C244x_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "PCM out",
+ .start = DMACH_PCM_OUT,
+ .end = DMACH_PCM_OUT,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .name = "PCM in",
+ .start = DMACH_PCM_IN,
+ .end = DMACH_PCM_IN,
+ .flags = IORESOURCE_DMA,
+ },
+ [4] = {
+ .name = "Mic in",
+ .start = DMACH_MIC_IN,
+ .end = DMACH_MIC_IN,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static u64 s3c_device_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_ac97 = {
+ .name = "s3c-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_ac97_resource),
+ .resource = s3c_ac97_resource,
+ .dev = {
+ .dma_mask = &s3c_device_ac97_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+EXPORT_SYMBOL(s3c_device_ac97);
+
#endif // CONFIG_CPU_S32440
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
new file mode 100644
index 0000000..efeb025
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -0,0 +1,282 @@
+/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006,2007,2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/cpu-freq.h>
+
+struct seq_file;
+
+#define MAX_BANKS (8)
+#define S3C2412_MAX_IO (8)
+
+/**
+ * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
+ * @bankcon: The cached version of settings in this structure.
+ * @tacp:
+ * @tacs: Time from address valid to nCS asserted.
+ * @tcos: Time from nCS asserted to nOE or nWE asserted.
+ * @tacc: Time that nOE or nWE is asserted.
+ * @tcoh: Time nCS is held after nOE or nWE are released.
+ * @tcah: Time address is held for after
+ * @nwait_en: Whether nWAIT is enabled for this bank.
+ *
+ * This structure represents the IO timings for a S3C2410 style IO bank
+ * used by the CPU frequency support if it needs to change the settings
+ * of the IO.
+ */
+struct s3c2410_iobank_timing {
+ unsigned long bankcon;
+ unsigned int tacp;
+ unsigned int tacs;
+ unsigned int tcos;
+ unsigned int tacc;
+ unsigned int tcoh; /* nCS hold afrer nOE/nWE */
+ unsigned int tcah; /* Address hold after nCS */
+ unsigned char nwait_en; /* nWait enabled for bank. */
+};
+
+/**
+ * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
+ * @idcy: The idle cycle time between transactions.
+ * @wstrd: nCS release to end of read cycle.
+ * @wstwr: nCS release to end of write cycle.
+ * @wstoen: nCS assertion to nOE assertion time.
+ * @wstwen: nCS assertion to nWE assertion time.
+ * @wstbrd: Burst ready delay.
+ * @smbidcyr: Register cache for smbidcyr value.
+ * @smbwstrd: Register cache for smbwstrd value.
+ * @smbwstwr: Register cache for smbwstwr value.
+ * @smbwstoen: Register cache for smbwstoen value.
+ * @smbwstwen: Register cache for smbwstwen value.
+ * @smbwstbrd: Register cache for smbwstbrd value.
+ *
+ * Timing information for a IO bank on an S3C2412 or similar system which
+ * uses a PL093 block.
+ */
+struct s3c2412_iobank_timing {
+ unsigned int idcy;
+ unsigned int wstrd;
+ unsigned int wstwr;
+ unsigned int wstoen;
+ unsigned int wstwen;
+ unsigned int wstbrd;
+
+ /* register cache */
+ unsigned char smbidcyr;
+ unsigned char smbwstrd;
+ unsigned char smbwstwr;
+ unsigned char smbwstoen;
+ unsigned char smbwstwen;
+ unsigned char smbwstbrd;
+};
+
+union s3c_iobank {
+ struct s3c2410_iobank_timing *io_2410;
+ struct s3c2412_iobank_timing *io_2412;
+};
+
+/**
+ * struct s3c_iotimings - Chip IO timings holder
+ * @bank: The timings for each IO bank.
+ */
+struct s3c_iotimings {
+ union s3c_iobank bank[MAX_BANKS];
+};
+
+/**
+ * struct s3c_plltab - PLL table information.
+ * @vals: List of PLL values.
+ * @size: Size of the PLL table @vals.
+ */
+struct s3c_plltab {
+ struct s3c_pllval *vals;
+ int size;
+};
+
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @max: Maxium settings, derived from core, board and user settings.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ * @lock_pll: Set if the PLL settings cannot be changed.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
+struct s3c_cpufreq_config {
+ struct s3c_freq freq;
+ struct s3c_freq max;
+ struct cpufreq_frequency_table pll;
+ struct s3c_clkdivs divs;
+ struct s3c_cpufreq_info *info; /* for core, not drivers */
+ struct s3c_cpufreq_board *board;
+
+ unsigned int lock_pll:1;
+};
+
+/**
+ * struct s3c_cpufreq_info - Information for the CPU frequency driver.
+ * @name: The name of this implementation.
+ * @max: The maximum frequencies for the system.
+ * @latency: Transition latency to give to cpufreq.
+ * @locktime_m: The lock-time in uS for the MPLL.
+ * @locktime_u: The lock-time in uS for the UPLL.
+ * @locttime_bits: The number of bits each LOCKTIME field.
+ * @need_pll: Set if this driver needs to change the PLL values to acheive
+ * any frequency changes. This is really only need by devices like the
+ * S3C2410 where there is no or limited divider between the PLL and the
+ * ARMCLK.
+ * @resume_clocks: Update the clocks on resume.
+ * @get_iotiming: Get the current IO timing data, mainly for use at start.
+ * @set_iotiming: Update the IO timings from the cached copies calculated
+ * from the @calc_iotiming entry when changing the frequency.
+ * @calc_iotiming: Calculate and update the cached copies of the IO timings
+ * from the newly calculated frequencies.
+ * @calc_freqtable: Calculate (fill in) the given frequency table from the
+ * current frequency configuration. If the table passed in is NULL,
+ * then the return is the number of elements to be filled for allocation
+ * of the table.
+ * @set_refresh: Set the memory refresh configuration.
+ * @set_fvco: Set the PLL frequencies.
+ * @set_divs: Update the clock divisors.
+ * @calc_divs: Calculate the clock divisors.
+ */
+struct s3c_cpufreq_info {
+ const char *name;
+ struct s3c_freq max;
+
+ unsigned int latency;
+
+ unsigned int locktime_m;
+ unsigned int locktime_u;
+ unsigned char locktime_bits;
+
+ unsigned int need_pll:1;
+
+ /* driver routines */
+
+ void (*resume_clocks)(void);
+
+ int (*get_iotiming)(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+ void (*set_iotiming)(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+ int (*calc_iotiming)(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+ int (*calc_freqtable)(struct s3c_cpufreq_config *cfg,
+ struct cpufreq_frequency_table *t,
+ size_t table_size);
+
+ void (*debug_io_show)(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
+ void (*set_refresh)(struct s3c_cpufreq_config *cfg);
+ void (*set_fvco)(struct s3c_cpufreq_config *cfg);
+ void (*set_divs)(struct s3c_cpufreq_config *cfg);
+ int (*calc_divs)(struct s3c_cpufreq_config *cfg);
+};
+
+extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
+
+extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
+
+/* exports and utilities for debugfs */
+extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
+extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
+
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#define s3c_cpufreq_debugfs_call(x) x
+#else
+#define s3c_cpufreq_debugfs_call(x) NULL
+#endif
+
+/* Useful utility functions. */
+
+extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
+
+/* S3C2410 and compatible exported functions */
+
+extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+
+extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+
+/* S3C2412 compatible routines */
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#define s3c_freq_dbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+
+static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
+ int index, size_t table_size,
+ unsigned int freq)
+{
+ if (index < 0)
+ return index;
+
+ if (table) {
+ if (index >= table_size)
+ return -ENOMEM;
+
+ s3c_freq_dbg("%s: { %d = %u kHz }\n",
+ __func__, index, freq);
+
+ table[index].index = index;
+ table[index].frequency = freq;
+ }
+
+ return index + 1;
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/fiq.h b/arch/arm/plat-s3c24xx/include/plat/fiq.h
new file mode 100644
index 0000000..8521b83
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/fiq.h
@@ -0,0 +1,13 @@
+/* linux/include/asm-arm/plat-s3c24xx/fiq.h
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU FIQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern int s3c24xx_set_fiq(unsigned int irq, bool on);
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index a9ac9e2..b6deeef 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -14,6 +14,7 @@
#ifdef CONFIG_CPU_S3C2410
extern int s3c2410_init(void);
+extern int s3c2410a_init(void);
extern void s3c2410_map_io(void);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 9587377..d02f5f0 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -493,6 +493,38 @@ s3c_irq_demux_extint4t7(unsigned int irq,
}
}
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+ u32 intmod;
+ unsigned offs;
+
+ if (on) {
+ offs = irq - FIQ_START;
+ if (offs > 31)
+ return -EINVAL;
+
+ intmod = 1 << offs;
+ } else {
+ intmod = 0;
+ }
+
+ __raw_writel(intmod, S3C2410_INTMOD);
+ return 0;
+}
+#endif
+
+
/* s3c24xx_init_irq
*
* Initialise S3C2410 IRQ system
@@ -505,6 +537,10 @@ void __init s3c24xx_init_irq(void)
int irqno;
int i;
+#ifdef CONFIG_FIQ
+ init_FIQ();
+#endif
+
irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
/* first, clear all interrupts pending... */
diff --git a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
new file mode 100644
index 0000000..43ea801
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
@@ -0,0 +1,64 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+/**
+ * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
+ * @cfg: The frequency configuration
+ *
+ * Set the SDRAM refresh value appropriately for the configured
+ * frequency.
+ */
+void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ struct s3c_cpufreq_board *board = cfg->board;
+ unsigned long refresh;
+ unsigned long refval;
+
+ /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+ * down to ensure that we do not overflow 32 bit numbers.
+ *
+ * This should work for HCLK up to 133MHz and refresh period up
+ * to 30usec.
+ */
+
+ refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+ refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */
+ refresh = (1 << 11) + 1 - refresh;
+
+ s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
+
+ refval = __raw_readl(S3C2410_REFRESH);
+ refval &= ~((1 << 12) - 1);
+ refval |= refresh;
+ __raw_writel(refval, S3C2410_REFRESH);
+}
+
+/**
+ * s3c2410_set_fvco - set the PLL value
+ * @cfg: The frequency configuration
+ */
+void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
+{
+ __raw_writel(cfg->pll.index, S3C2410_MPLLCON);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
new file mode 100644
index 0000000..d0a3a14
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -0,0 +1,477 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2410_print_timing - print bank timing data for debug purposes
+ * @pfx: The prefix to put on the output
+ * @timings: The timing inforamtion to print.
+*/
+static void s3c2410_print_timing(const char *pfx,
+ struct s3c_iotimings *timings)
+{
+ struct s3c2410_iobank_timing *bt;
+ int bank;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = timings->bank[bank].io_2410;
+ if (!bt)
+ continue;
+
+ printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
+ "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
+ print_ns(bt->tacs),
+ print_ns(bt->tcos),
+ print_ns(bt->tacc),
+ print_ns(bt->tcoh),
+ print_ns(bt->tcah));
+ }
+}
+
+/**
+ * bank_reg - convert bank number to pointer to the control register.
+ * @bank: The IO bank number.
+ */
+static inline void __iomem *bank_reg(unsigned int bank)
+{
+ return S3C2410_BANKCON0 + (bank << 2);
+}
+
+/**
+ * bank_is_io - test whether bank is used for IO
+ * @bankcon: The bank control register.
+ *
+ * This is a simplistic test to see if any BANKCON[x] is not an IO
+ * bank. It currently does not take into account whether BWSCON has
+ * an illegal width-setting in it, or if the pin connected to nCS[x]
+ * is actually being handled as a chip-select.
+ */
+static inline int bank_is_io(unsigned long bankcon)
+{
+ return !(bankcon & S3C2410_BANKCON_SDRAM);
+}
+
+/**
+ * to_div - convert cycle time to divisor
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ *
+ * Convert the given cycle time into the divisor to use to obtain it from
+ * HCLK.
+*/
+static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
+{
+ if (cyc == 0)
+ return 0;
+
+ return DIV_ROUND_UP(cyc, hclk_tns);
+}
+
+/**
+ * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ * @shift: The shift to get to the control bits.
+ *
+ * Calculate the divisor, and turn it into the correct control bits to
+ * set in the result, @v.
+ */
+static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
+ unsigned long *v, int shift)
+{
+ unsigned int div = to_div(cyc, hclk_tns);
+ unsigned long val;
+
+ s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
+ __func__, cyc, hclk_tns, shift, div);
+
+ switch (div) {
+ case 0:
+ val = 0;
+ break;
+ case 1:
+ val = 1;
+ break;
+ case 2:
+ val = 2;
+ break;
+ case 3:
+ case 4:
+ val = 3;
+ break;
+ default:
+ return -1;
+ }
+
+ *v |= val << shift;
+ return 0;
+}
+
+int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
+{
+ /* Currently no support for Tacp calculations. */
+ return 0;
+}
+
+/**
+ * calc_tacc - calculate divisor control for tacc.
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @nwait_en: IS nWAIT enabled for this bank.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ *
+ * Calculate the divisor control for tACC, taking into account whether
+ * the bank has nWAIT enabled. The result is used to modify the value
+ * pointed to by @v.
+*/
+static int calc_tacc(unsigned int cyc, int nwait_en,
+ unsigned long hclk_tns, unsigned long *v)
+{
+ unsigned int div = to_div(cyc, hclk_tns);
+ unsigned long val;
+
+ s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
+ __func__, cyc, nwait_en, hclk_tns, div);
+
+ /* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
+ if (nwait_en && div < 4)
+ div = 4;
+
+ switch (div) {
+ case 0:
+ val = 0;
+ break;
+
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ val = div - 1;
+ break;
+
+ case 5:
+ case 6:
+ val = 4;
+ break;
+
+ case 7:
+ case 8:
+ val = 5;
+ break;
+
+ case 9:
+ case 10:
+ val = 6;
+ break;
+
+ case 11:
+ case 12:
+ case 13:
+ case 14:
+ val = 7;
+ break;
+
+ default:
+ return -1;
+ }
+
+ *v |= val << 8;
+ return 0;
+}
+
+/**
+ * s3c2410_calc_bank - calculate bank timing infromation
+ * @cfg: The configuration we need to calculate for.
+ * @bt: The bank timing information.
+ *
+ * Given the cycle timine for a bank @bt, calculate the new BANKCON
+ * setting for the @cfg timing. This updates the timing information
+ * ready for the cpu frequency change.
+ */
+static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
+ struct s3c2410_iobank_timing *bt)
+{
+ unsigned long hclk = cfg->freq.hclk_tns;
+ unsigned long res;
+ int ret;
+
+ res = bt->bankcon;
+ res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
+
+ /* tacp: 2,3,4,5 */
+ /* tcah: 0,1,2,4 */
+ /* tcoh: 0,1,2,4 */
+ /* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
+ /* tcos: 0,1,2,4 */
+ /* tacs: 0,1,2,4 */
+
+ ret = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
+ ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
+ ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
+ ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
+
+ if (ret)
+ return -EINVAL;
+
+ ret |= calc_tacp(bt->tacp, hclk, &res);
+ ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
+
+ if (ret)
+ return -EINVAL;
+
+ bt->bankcon = res;
+ return 0;
+}
+
+static unsigned int tacc_tab[] = {
+ [0] = 1,
+ [1] = 2,
+ [2] = 3,
+ [3] = 4,
+ [4] = 6,
+ [5] = 9,
+ [6] = 10,
+ [7] = 14,
+};
+
+/**
+ * get_tacc - turn tACC value into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_tacc(unsigned long hclk_tns,
+ unsigned long val)
+{
+ val &= 7;
+ return hclk_tns * tacc_tab[val];
+}
+
+/**
+ * get_0124 - turn 0/1/2/4 divider into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_0124(unsigned long hclk_tns,
+ unsigned long val)
+{
+ val &= 3;
+ return hclk_tns * ((val == 3) ? 4 : val);
+}
+
+/**
+ * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
+ * @cfg: The frequency configuration
+ * @bt: The bank timing to fill in (uses cached BANKCON)
+ *
+ * Given the BANKCON setting in @bt and the current frequency settings
+ * in @cfg, update the cycle timing information.
+ */
+void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+ struct s3c2410_iobank_timing *bt)
+{
+ unsigned long bankcon = bt->bankcon;
+ unsigned long hclk = cfg->freq.hclk_tns;
+
+ bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+ bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+ bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+ bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+ bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+}
+
+/**
+ * s3c2410_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+ */
+void s3c2410_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob)
+{
+ struct s3c2410_iobank_timing *bt = iob->io_2410;
+ unsigned long bankcon = bt->bankcon;
+ unsigned long hclk = cfg->freq.hclk_tns;
+ unsigned int tacs;
+ unsigned int tcos;
+ unsigned int tacc;
+ unsigned int tcoh;
+ unsigned int tcah;
+
+ seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
+
+ tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+ tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+ tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+ tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+ tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+
+ seq_printf(seq,
+ "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+ print_ns(bt->tacs),
+ print_ns(bt->tcos),
+ print_ns(bt->tacc),
+ print_ns(bt->tcoh),
+ print_ns(bt->tcah));
+
+ seq_printf(seq,
+ "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+ print_ns(tacs),
+ print_ns(tcos),
+ print_ns(tacc),
+ print_ns(tcoh),
+ print_ns(tcah));
+}
+
+/**
+ * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to fill out.
+ *
+ * Calculate the new values for the banks in @iot based on the new
+ * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
+ * to update the timing when necessary.
+ */
+int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2410_iobank_timing *bt;
+ unsigned long bankcon;
+ int bank;
+ int ret;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bankcon = __raw_readl(bank_reg(bank));
+ bt = iot->bank[bank].io_2410;
+
+ if (!bt)
+ continue;
+
+ bt->bankcon = bankcon;
+
+ ret = s3c2410_calc_bank(cfg, bt);
+ if (ret) {
+ printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+ __func__, bank);
+ goto err;
+ }
+
+ s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
+ __func__, bank, bt->bankcon);
+ }
+
+ return 0;
+ err:
+ return ret;
+}
+
+/**
+ * s3c2410_iotiming_set - set the IO timings from the given setup.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to use.
+ *
+ * Set all the currently used IO bank timing information generated
+ * by s3c2410_iotiming_calc() once the core has validated that all
+ * the new values are within permitted bounds.
+ */
+void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2410_iobank_timing *bt;
+ int bank;
+
+ /* set the io timings from the specifier */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2410;
+ if (!bt)
+ continue;
+
+ __raw_writel(bt->bankcon, bank_reg(bank));
+ }
+}
+
+/**
+ * s3c2410_iotiming_get - Get the timing information from current registers.
+ * @cfg: The frequency configuration
+ * @timings: The IO timing information to fill out.
+ *
+ * Calculate the @timings timing information from the current frequency
+ * information in @cfg, and the new frequency configur
+ * through all the IO banks, reading the state and then updating @iot
+ * as necessary.
+ *
+ * This is used at the moment on initialisation to get the current
+ * configuration so that boards do not have to carry their own setup
+ * if the timings are correct on initialisation.
+ */
+
+int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings)
+{
+ struct s3c2410_iobank_timing *bt;
+ unsigned long bankcon;
+ unsigned long bwscon;
+ int bank;
+
+ bwscon = __raw_readl(S3C2410_BWSCON);
+
+ /* look through all banks to see what is currently set. */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bankcon = __raw_readl(bank_reg(bank));
+
+ if (!bank_is_io(bankcon))
+ continue;
+
+ s3c_freq_iodbg("%s: bank %d: con %08lx\n",
+ __func__, bank, bankcon);
+
+ bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL);
+ if (!bt) {
+ printk(KERN_ERR "%s: no memory for bank\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* find out in nWait is enabled for bank. */
+
+ if (bank != 0) {
+ unsigned long tmp = S3C2410_BWSCON_GET(bwscon, bank);
+ if (tmp & S3C2410_BWSCON_WS)
+ bt->nwait_en = 1;
+ }
+
+ timings->bank[bank].io_2410 = bt;
+ bt->bankcon = bankcon;
+
+ s3c2410_iotiming_getbank(cfg, bt);
+ }
+
+ s3c2410_print_timing("get", timings);
+ return 0;
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
new file mode 100644
index 0000000..fd45e47f
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -0,0 +1,285 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412/S3C2443 (PL093 based) IO timing support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/amba/pl093.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2412_print_timing - print timing infromation via printk.
+ * @pfx: The prefix to print each line with.
+ * @iot: The IO timing information
+ */
+static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
+{
+ struct s3c2412_iobank_timing *bt;
+ unsigned int bank;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2412;
+ if (!bt)
+ continue;
+
+ printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+ "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
+ print_ns(bt->idcy),
+ print_ns(bt->wstrd),
+ print_ns(bt->wstwr),
+ print_ns(bt->wstoen),
+ print_ns(bt->wstwen),
+ print_ns(bt->wstbrd));
+ }
+}
+
+/**
+ * to_div - turn a cycle length into a divisor setting.
+ * @cyc_tns: The cycle time in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ */
+static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
+{
+ return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
+}
+
+/**
+ * calc_timing - calculate timing divisor value and check in range.
+ * @hwtm: The hardware timing in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ * @err: Pointer to err variable to update in event of failure.
+ */
+static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
+ unsigned int *err)
+{
+ unsigned int ret = to_div(hwtm, clk_tns);
+
+ if (ret > 0xf)
+ *err = -EINVAL;
+
+ return ret;
+}
+
+/**
+ * s3c2412_calc_bank - calculate the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @bt: The bank timing.
+ */
+static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
+ struct s3c2412_iobank_timing *bt)
+{
+ unsigned int hclk = cfg->freq.hclk_tns;
+ int err = 0;
+
+ bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
+ bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
+ bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
+ bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
+ bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
+ bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
+
+ return err;
+}
+
+/**
+ * s3c2412_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+*/
+void s3c2412_iotiming_debugfs(struct seq_file *seq,
+ struct s3c_cpufreq_config *cfg,
+ union s3c_iobank *iob)
+{
+ struct s3c2412_iobank_timing *bt = iob->io_2412;
+
+ seq_printf(seq,
+ "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+ "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
+ print_ns(bt->idcy),
+ print_ns(bt->wstrd),
+ print_ns(bt->wstwr),
+ print_ns(bt->wstoen),
+ print_ns(bt->wstwen),
+ print_ns(bt->wstbrd));
+}
+
+/**
+ * s3c2412_iotiming_calc - calculate all the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Calculate the timing information for all the banks that are
+ * configured as IO, using s3c2412_calc_bank().
+ */
+int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2412_iobank_timing *bt;
+ int bank;
+ int ret;
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2412;
+ if (!bt)
+ continue;
+
+ ret = s3c2412_calc_bank(cfg, bt);
+ if (ret) {
+ printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+ __func__, bank);
+ goto err;
+ }
+ }
+
+ return 0;
+ err:
+ return ret;
+}
+
+/**
+ * s3c2412_iotiming_set - set the timing information
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Set the IO bank information from the details calculated earlier from
+ * calling s3c2412_iotiming_calc().
+ */
+void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *iot)
+{
+ struct s3c2412_iobank_timing *bt;
+ void __iomem *regs;
+ int bank;
+
+ /* set the io timings from the specifier */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ bt = iot->bank[bank].io_2412;
+ if (!bt)
+ continue;
+
+ regs = S3C2412_SSMC_BANK(bank);
+
+ __raw_writel(bt->smbidcyr, regs + SMBIDCYR);
+ __raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
+ __raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
+ __raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
+ __raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
+ __raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
+ }
+}
+
+static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
+{
+ return (reg & 0xf) * clock;
+}
+
+static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+ struct s3c2412_iobank_timing *bt,
+ unsigned int bank)
+{
+ unsigned long clk = cfg->freq.hclk_tns; /* ssmc clock??? */
+ void __iomem *regs = S3C2412_SSMC_BANK(bank);
+
+ bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
+ bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
+ bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
+ bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
+ bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
+}
+
+/**
+ * bank_is_io - return true if bank is (possibly) IO.
+ * @bank: The bank number.
+ * @bankcfg: The value of S3C2412_EBI_BANKCFG.
+ */
+static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
+{
+ if (bank < 2)
+ return true;
+
+ return !(bankcfg & (1 << bank));
+}
+
+int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+ struct s3c_iotimings *timings)
+{
+ struct s3c2412_iobank_timing *bt;
+ u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
+ unsigned int bank;
+
+ /* look through all banks to see what is currently set. */
+
+ for (bank = 0; bank < MAX_BANKS; bank++) {
+ if (!bank_is_io(bank, bankcfg))
+ continue;
+
+ bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL);
+ if (!bt) {
+ printk(KERN_ERR "%s: no memory for bank\n", __func__);
+ return -ENOMEM;
+ }
+
+ timings->bank[bank].io_2412 = bt;
+ s3c2412_iotiming_getbank(cfg, bt, bank);
+ }
+
+ s3c2412_print_timing("get", timings);
+ return 0;
+}
+
+/* this is in here as it is so small, it doesn't currently warrant a file
+ * to itself. We expect that any s3c24xx needing this is going to also
+ * need the iotiming support.
+ */
+void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+ struct s3c_cpufreq_board *board = cfg->board;
+ u32 refresh;
+
+ WARN_ON(board == NULL);
+
+ /* Reduce both the refresh time (in ns) and the frequency (in MHz)
+ * down to ensure that we do not overflow 32 bit numbers.
+ *
+ * This should work for HCLK up to 133MHz and refresh period up
+ * to 30usec.
+ */
+
+ refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+ refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */
+ refresh &= ((1 << 16) - 1);
+
+ s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
+
+ __raw_writel(refresh, S3C2412_REFRESH);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
new file mode 100644
index 0000000..ae2e6c6
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -0,0 +1,311 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static inline int within_khz(unsigned long a, unsigned long b)
+{
+ long diff = a - b;
+
+ return (diff >= -1000 && diff <= 1000);
+}
+
+/**
+ * s3c2440_cpufreq_calcdivs - calculate divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Calcualte the divider values for the given frequency settings
+ * specified in @cfg. The values are stored in @cfg for later use
+ * by the relevant set routine if the request settings can be reached.
+ */
+int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned int hdiv, pdiv;
+ unsigned long hclk, fclk, armclk;
+ unsigned long hclk_max;
+
+ fclk = cfg->freq.fclk;
+ armclk = cfg->freq.armclk;
+ hclk_max = cfg->max.hclk;
+
+ s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
+ __func__, fclk, armclk, hclk_max);
+
+ if (armclk > fclk) {
+ printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
+ armclk = fclk;
+ }
+
+ /* if we are in DVS, we need HCLK to be <= ARMCLK */
+ if (armclk < fclk && armclk < hclk_max)
+ hclk_max = armclk;
+
+ for (hdiv = 1; hdiv < 9; hdiv++) {
+ if (hdiv == 5 || hdiv == 7)
+ hdiv++;
+
+ hclk = (fclk / hdiv);
+ if (hclk <= hclk_max || within_khz(hclk, hclk_max))
+ break;
+ }
+
+ s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
+
+ if (hdiv > 8)
+ goto invalid;
+
+ pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+ if ((hclk / pdiv) > cfg->max.pclk)
+ pdiv++;
+
+ s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+ if (pdiv > 2)
+ goto invalid;
+
+ pdiv *= hdiv;
+
+ /* calculate a valid armclk */
+
+ if (armclk < hclk)
+ armclk = hclk;
+
+ /* if we're running armclk lower than fclk, this really means
+ * that the system should go into dvs mode, which means that
+ * armclk is connected to hclk. */
+ if (armclk < fclk) {
+ cfg->divs.dvs = 1;
+ armclk = hclk;
+ } else
+ cfg->divs.dvs = 0;
+
+ cfg->freq.armclk = armclk;
+
+ /* store the result, and then return */
+
+ cfg->divs.h_divisor = hdiv;
+ cfg->divs.p_divisor = pdiv;
+
+ return 0;
+
+ invalid:
+ return -EINVAL;
+}
+
+#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
+ S3C2440_CAMDIVN_HCLK4_HALF)
+
+/**
+ * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Set the divisors from the settings in @cfg, which where generated
+ * during the calculation phase by s3c2440_cpufreq_calcdivs().
+ */
+static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+ unsigned long clkdiv, camdiv;
+
+ s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
+ cfg->divs.h_divisor, cfg->divs.p_divisor);
+
+ clkdiv = __raw_readl(S3C2410_CLKDIVN);
+ camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+ clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
+ camdiv &= ~CAMDIVN_HCLK_HALF;
+
+ switch (cfg->divs.h_divisor) {
+ case 1:
+ clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
+ break;
+
+ case 2:
+ clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
+ break;
+
+ case 6:
+ camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
+ case 3:
+ clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
+ break;
+
+ case 8:
+ camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
+ case 4:
+ clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
+ break;
+
+ default:
+ BUG(); /* we don't expect to get here. */
+ }
+
+ if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+ clkdiv |= S3C2440_CLKDIVN_PDIVN;
+
+ /* todo - set pclk. */
+
+ /* Write the divisors first with hclk intentionally halved so that
+ * when we write clkdiv we will under-frequency instead of over. We
+ * then make a short delay and remove the hclk halving if necessary.
+ */
+
+ __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+ ndelay(20);
+ __raw_writel(camdiv, S3C2440_CAMDIVN);
+
+ clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
+ int *divs,
+ struct cpufreq_frequency_table *table,
+ size_t table_size)
+{
+ unsigned long freq;
+ int index = 0;
+ int div;
+
+ for (div = *divs; div > 0; div = *divs++) {
+ freq = fclk / div;
+
+ if (freq > max_hclk && div != 1)
+ continue;
+
+ freq /= 1000; /* table is in kHz */
+ index = s3c_cpufreq_addfreq(table, index, table_size, freq);
+ if (index < 0)
+ break;
+ }
+
+ return index;
+}
+
+static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
+
+static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
+ struct cpufreq_frequency_table *table,
+ size_t table_size)
+{
+ int ret;
+
+ WARN_ON(cfg->info == NULL);
+ WARN_ON(cfg->board == NULL);
+
+ ret = run_freq_for(cfg->info->max.hclk,
+ cfg->info->max.fclk,
+ hclk_divs,
+ table, table_size);
+
+ s3c_freq_dbg("%s: returning %d\n", __func__, ret);
+
+ return ret;
+}
+
+struct s3c_cpufreq_info s3c2440_cpufreq_info = {
+ .max = {
+ .fclk = 400000000,
+ .hclk = 133333333,
+ .pclk = 66666666,
+ },
+
+ .locktime_m = 300,
+ .locktime_u = 300,
+ .locktime_bits = 16,
+
+ .name = "s3c244x",
+ .calc_iotiming = s3c2410_iotiming_calc,
+ .set_iotiming = s3c2410_iotiming_set,
+ .get_iotiming = s3c2410_iotiming_get,
+ .set_fvco = s3c2410_set_fvco,
+
+ .set_refresh = s3c2410_cpufreq_setrefresh,
+ .set_divs = s3c2440_cpufreq_setdivs,
+ .calc_divs = s3c2440_cpufreq_calcdivs,
+ .calc_freqtable = s3c2440_cpufreq_calctable,
+
+ .resume_clocks = s3c244x_setup_clocks,
+
+ .debug_io_show = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
+};
+
+static int s3c2440_cpufreq_add(struct sys_device *sysdev)
+{
+ xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+ hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+ fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+ armclk = s3c_cpufreq_clk_get(NULL, "armclk");
+
+ if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
+ printk(KERN_ERR "%s: failed to get clocks\n", __func__);
+ return -ENOENT;
+ }
+
+ return s3c_cpufreq_register(&s3c2440_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2440_cpufreq_driver = {
+ .add = s3c2440_cpufreq_add,
+};
+
+static int s3c2440_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass,
+ &s3c2440_cpufreq_driver);
+}
+
+/* arch_initcall adds the clocks we need, so use subsys_initcall. */
+subsys_initcall(s3c2440_cpufreq_init);
+
+static struct sysdev_driver s3c2442_cpufreq_driver = {
+ .add = s3c2440_cpufreq_add,
+};
+
+static int s3c2442_cpufreq_init(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass,
+ &s3c2442_cpufreq_driver);
+}
+
+subsys_initcall(s3c2442_cpufreq_init);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
new file mode 100644
index 0000000..ff9443b
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
@@ -0,0 +1,97 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
+ { .frequency = 75000000, .index = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */
+ { .frequency = 80000000, .index = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */
+ { .frequency = 90000000, .index = PLLVAL(0x70, 2, 3), }, /* FVco 720.000000 */
+ { .frequency = 100000000, .index = PLLVAL(0x5c, 1, 3), }, /* FVco 800.000000 */
+ { .frequency = 110000000, .index = PLLVAL(0x66, 1, 3), }, /* FVco 880.000000 */
+ { .frequency = 120000000, .index = PLLVAL(0x70, 1, 3), }, /* FVco 960.000000 */
+ { .frequency = 150000000, .index = PLLVAL(0x75, 3, 2), }, /* FVco 600.000000 */
+ { .frequency = 160000000, .index = PLLVAL(0x98, 4, 2), }, /* FVco 640.000000 */
+ { .frequency = 170000000, .index = PLLVAL(0x4d, 1, 2), }, /* FVco 680.000000 */
+ { .frequency = 180000000, .index = PLLVAL(0x70, 2, 2), }, /* FVco 720.000000 */
+ { .frequency = 190000000, .index = PLLVAL(0x57, 1, 2), }, /* FVco 760.000000 */
+ { .frequency = 200000000, .index = PLLVAL(0x5c, 1, 2), }, /* FVco 800.000000 */
+ { .frequency = 210000000, .index = PLLVAL(0x84, 2, 2), }, /* FVco 840.000000 */
+ { .frequency = 220000000, .index = PLLVAL(0x66, 1, 2), }, /* FVco 880.000000 */
+ { .frequency = 230000000, .index = PLLVAL(0x6b, 1, 2), }, /* FVco 920.000000 */
+ { .frequency = 240000000, .index = PLLVAL(0x70, 1, 2), }, /* FVco 960.000000 */
+ { .frequency = 300000000, .index = PLLVAL(0x75, 3, 1), }, /* FVco 600.000000 */
+ { .frequency = 310000000, .index = PLLVAL(0x93, 4, 1), }, /* FVco 620.000000 */
+ { .frequency = 320000000, .index = PLLVAL(0x98, 4, 1), }, /* FVco 640.000000 */
+ { .frequency = 330000000, .index = PLLVAL(0x66, 2, 1), }, /* FVco 660.000000 */
+ { .frequency = 340000000, .index = PLLVAL(0x4d, 1, 1), }, /* FVco 680.000000 */
+ { .frequency = 350000000, .index = PLLVAL(0xa7, 4, 1), }, /* FVco 700.000000 */
+ { .frequency = 360000000, .index = PLLVAL(0x70, 2, 1), }, /* FVco 720.000000 */
+ { .frequency = 370000000, .index = PLLVAL(0xb1, 4, 1), }, /* FVco 740.000000 */
+ { .frequency = 380000000, .index = PLLVAL(0x57, 1, 1), }, /* FVco 760.000000 */
+ { .frequency = 390000000, .index = PLLVAL(0x7a, 2, 1), }, /* FVco 780.000000 */
+ { .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, /* FVco 800.000000 */
+};
+
+static int s3c2440_plls12_add(struct sys_device *dev)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ if (IS_ERR(xtal_clk))
+ return PTR_ERR(xtal_clk);
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ if (xtal == 12000000) {
+ printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
+ return s3c_plltab_register(s3c2440_plls_12,
+ ARRAY_SIZE(s3c2440_plls_12));
+ }
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2440_plls12_drv = {
+ .add = s3c2440_plls12_add,
+};
+
+static int __init s3c2440_pll_12mhz(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv);
+
+}
+
+arch_initcall(s3c2440_pll_12mhz);
+
+static struct sysdev_driver s3c2442_plls12_drv = {
+ .add = s3c2440_plls12_add,
+};
+
+static int __init s3c2442_pll_12mhz(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv);
+
+}
+
+arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
new file mode 100644
index 0000000..7679af1
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+ *
+ * Copyright (c) 2006-2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ * Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
+ { .frequency = 78019200, .index = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */
+ { .frequency = 84067200, .index = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */
+ { .frequency = 90115200, .index = PLLVAL(141, 5, 3), }, /* FVco 720.921600 */
+ { .frequency = 96163200, .index = PLLVAL(151, 5, 3), }, /* FVco 769.305600 */
+ { .frequency = 102135600, .index = PLLVAL(185, 6, 3), }, /* FVco 817.084800 */
+ { .frequency = 108259200, .index = PLLVAL(171, 5, 3), }, /* FVco 866.073600 */
+ { .frequency = 114307200, .index = PLLVAL(127, 3, 3), }, /* FVco 914.457600 */
+ { .frequency = 120234240, .index = PLLVAL(134, 3, 3), }, /* FVco 961.873920 */
+ { .frequency = 126161280, .index = PLLVAL(141, 3, 3), }, /* FVco 1009.290240 */
+ { .frequency = 132088320, .index = PLLVAL(148, 3, 3), }, /* FVco 1056.706560 */
+ { .frequency = 138015360, .index = PLLVAL(155, 3, 3), }, /* FVco 1104.122880 */
+ { .frequency = 144789120, .index = PLLVAL(163, 3, 3), }, /* FVco 1158.312960 */
+ { .frequency = 150100363, .index = PLLVAL(187, 9, 2), }, /* FVco 600.401454 */
+ { .frequency = 156038400, .index = PLLVAL(121, 5, 2), }, /* FVco 624.153600 */
+ { .frequency = 162086400, .index = PLLVAL(126, 5, 2), }, /* FVco 648.345600 */
+ { .frequency = 168134400, .index = PLLVAL(131, 5, 2), }, /* FVco 672.537600 */
+ { .frequency = 174048000, .index = PLLVAL(177, 7, 2), }, /* FVco 696.192000 */
+ { .frequency = 180230400, .index = PLLVAL(141, 5, 2), }, /* FVco 720.921600 */
+ { .frequency = 186278400, .index = PLLVAL(124, 4, 2), }, /* FVco 745.113600 */
+ { .frequency = 192326400, .index = PLLVAL(151, 5, 2), }, /* FVco 769.305600 */
+ { .frequency = 198132480, .index = PLLVAL(109, 3, 2), }, /* FVco 792.529920 */
+ { .frequency = 204271200, .index = PLLVAL(185, 6, 2), }, /* FVco 817.084800 */
+ { .frequency = 210268800, .index = PLLVAL(141, 4, 2), }, /* FVco 841.075200 */
+ { .frequency = 216518400, .index = PLLVAL(171, 5, 2), }, /* FVco 866.073600 */
+ { .frequency = 222264000, .index = PLLVAL(97, 2, 2), }, /* FVco 889.056000 */
+ { .frequency = 228614400, .index = PLLVAL(127, 3, 2), }, /* FVco 914.457600 */
+ { .frequency = 234259200, .index = PLLVAL(158, 4, 2), }, /* FVco 937.036800 */
+ { .frequency = 240468480, .index = PLLVAL(134, 3, 2), }, /* FVco 961.873920 */
+ { .frequency = 246960000, .index = PLLVAL(167, 4, 2), }, /* FVco 987.840000 */
+ { .frequency = 252322560, .index = PLLVAL(141, 3, 2), }, /* FVco 1009.290240 */
+ { .frequency = 258249600, .index = PLLVAL(114, 2, 2), }, /* FVco 1032.998400 */
+ { .frequency = 264176640, .index = PLLVAL(148, 3, 2), }, /* FVco 1056.706560 */
+ { .frequency = 270950400, .index = PLLVAL(120, 2, 2), }, /* FVco 1083.801600 */
+ { .frequency = 276030720, .index = PLLVAL(155, 3, 2), }, /* FVco 1104.122880 */
+ { .frequency = 282240000, .index = PLLVAL(92, 1, 2), }, /* FVco 1128.960000 */
+ { .frequency = 289578240, .index = PLLVAL(163, 3, 2), }, /* FVco 1158.312960 */
+ { .frequency = 294235200, .index = PLLVAL(131, 2, 2), }, /* FVco 1176.940800 */
+ { .frequency = 300200727, .index = PLLVAL(187, 9, 1), }, /* FVco 600.401454 */
+ { .frequency = 306358690, .index = PLLVAL(191, 9, 1), }, /* FVco 612.717380 */
+ { .frequency = 312076800, .index = PLLVAL(121, 5, 1), }, /* FVco 624.153600 */
+ { .frequency = 318366720, .index = PLLVAL(86, 3, 1), }, /* FVco 636.733440 */
+ { .frequency = 324172800, .index = PLLVAL(126, 5, 1), }, /* FVco 648.345600 */
+ { .frequency = 330220800, .index = PLLVAL(109, 4, 1), }, /* FVco 660.441600 */
+ { .frequency = 336268800, .index = PLLVAL(131, 5, 1), }, /* FVco 672.537600 */
+ { .frequency = 342074880, .index = PLLVAL(93, 3, 1), }, /* FVco 684.149760 */
+ { .frequency = 348096000, .index = PLLVAL(177, 7, 1), }, /* FVco 696.192000 */
+ { .frequency = 355622400, .index = PLLVAL(118, 4, 1), }, /* FVco 711.244800 */
+ { .frequency = 360460800, .index = PLLVAL(141, 5, 1), }, /* FVco 720.921600 */
+ { .frequency = 366206400, .index = PLLVAL(165, 6, 1), }, /* FVco 732.412800 */
+ { .frequency = 372556800, .index = PLLVAL(124, 4, 1), }, /* FVco 745.113600 */
+ { .frequency = 378201600, .index = PLLVAL(126, 4, 1), }, /* FVco 756.403200 */
+ { .frequency = 384652800, .index = PLLVAL(151, 5, 1), }, /* FVco 769.305600 */
+ { .frequency = 391608000, .index = PLLVAL(177, 6, 1), }, /* FVco 783.216000 */
+ { .frequency = 396264960, .index = PLLVAL(109, 3, 1), }, /* FVco 792.529920 */
+ { .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, /* FVco 804.384000 */
+};
+
+static int s3c2440_plls169344_add(struct sys_device *dev)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+
+ xtal_clk = clk_get(NULL, "xtal");
+ if (IS_ERR(xtal_clk))
+ return PTR_ERR(xtal_clk);
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ if (xtal == 169344000) {
+ printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
+ return s3c_plltab_register(s3c2440_plls_169344,
+ ARRAY_SIZE(s3c2440_plls_169344));
+ }
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2440_plls169344_drv = {
+ .add = s3c2440_plls169344_add,
+};
+
+static int __init s3c2440_pll_16934400(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass,
+ &s3c2440_plls169344_drv);
+
+}
+
+arch_initcall(s3c2440_pll_16934400);
+
+static struct sysdev_driver s3c2442_plls169344_drv = {
+ .add = s3c2440_plls169344_add,
+};
+
+static int __init s3c2442_pll_16934400(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass,
+ &s3c2442_plls169344_drv);
+
+}
+
+arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
new file mode 100644
index 0000000..89fcf53
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
@@ -0,0 +1,38 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+ int enable)
+{
+
+ printk(KERN_INFO "%s(%d)\n", __func__, enable);
+ if (enable) {
+ s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
+ s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
+ s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
+ s3c2410_gpio_pullup(S3C2410_GPD(10), 0);
+ s3c2410_gpio_pullup(S3C2410_GPD(9), 0);
+ } else {
+ s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_pullup(S3C2410_GPD(10), 1);
+ s3c2410_gpio_pullup(S3C2410_GPD(9), 1);
+ s3c2410_gpio_pullup(S3C2410_GPD(8), 1);
+ }
+}
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 5ebd8b4..bcfa778 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -19,6 +19,7 @@ config PLAT_S3C64XX
select S3C_GPIO_PULL_UPDOWN
select S3C_GPIO_CFG_S3C24XX
select S3C_GPIO_CFG_S3C64XX
+ select S3C_DEV_NAND
select USB_ARCH_HAS_OHCI
help
Base platform code for any Samsung S3C64XX device
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 3c8882c..b85b435 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -40,4 +40,5 @@ obj-$(CONFIG_S3C64XX_DMA) += dma.o
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o \ No newline at end of file
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
diff --git a/arch/arm/plat-s3c/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
index 1322beb..1322beb 100644
--- a/arch/arm/plat-s3c/dev-audio.c
+++ b/arch/arm/plat-s3c64xx/dev-audio.c
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 1debc1f..febac19 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -153,7 +153,7 @@ static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
u32 div;
if (parent < rate)
- return rate;
+ return parent;
div = (parent / rate) - 1;
if (div > armclk_mask)
@@ -175,7 +175,7 @@ static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
div = clk_get_rate(clk->parent) / rate;
val = __raw_readl(S3C_CLK_DIV0);
- val &= armclk_mask;
+ val &= ~armclk_mask;
val |= (div - 1);
__raw_writel(val, S3C_CLK_DIV0);
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
new file mode 100644
index 0000000..a8a711c
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -0,0 +1,50 @@
+# arch/arm/plat-s5pc1xx/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+# Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+config PLAT_S5PC1XX
+ bool
+ depends on ARCH_S5PC1XX
+ default y
+ select PLAT_S3C
+ select ARM_VIC
+ select NO_IOPORT
+ select ARCH_REQUIRE_GPIOLIB
+ select S3C_GPIO_TRACK
+ select S3C_GPIO_PULL_UPDOWN
+ help
+ Base platform code for any Samsung S5PC1XX device
+
+if PLAT_S5PC1XX
+
+# Configuration options shared by all S3C64XX implementations
+
+config CPU_S5PC100_INIT
+ bool
+ help
+ Common initialisation code for the S5PC1XX
+
+config CPU_S5PC100_CLOCK
+ bool
+ help
+ Common clock support code for the S5PC1XX
+
+# platform specific device setup
+
+config S5PC100_SETUP_I2C0
+ bool
+ default y
+ help
+ Common setup code for i2c bus 0.
+
+ Note, currently since i2c0 is always compiled, this setup helper
+ is always compiled with it.
+
+config S5PC100_SETUP_I2C1
+ bool
+ help
+ Common setup code for i2c bus 1.
+endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
new file mode 100644
index 0000000..f1ecb2c
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -0,0 +1,26 @@
+# arch/arm/plat-s5pc1xx/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n := dummy.o
+obj- :=
+
+# Core files
+
+obj-y += dev-uart.o
+obj-y += cpu.o
+obj-y += irq.o
+
+# CPU support
+
+obj-$(CONFIG_CPU_S5PC100_INIT) += s5pc100-init.o
+obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
+
+# Device setup
+
+obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
new file mode 100644
index 0000000..715a733
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/cpu.c
@@ -0,0 +1,112 @@
+/* linux/arch/arm/plat-s5pc1xx/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX CPU Support
+ *
+ * Based on plat-s3c64xx/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/s5pc100.h>
+
+/* table of supported CPUs */
+
+static const char name_s5pc100[] = "S5PC100";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = 0x43100000,
+ .idmask = 0xfffff000,
+ .map_io = s5pc100_map_io,
+ .init_clocks = s5pc100_init_clocks,
+ .init_uarts = s5pc100_init_uarts,
+ .init = s5pc100_init,
+ .name = name_s5pc100,
+ },
+};
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xffff)
+
+static struct map_desc s5pc1xx_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5PC1XX_VA_CHIPID,
+ .pfn = __phys_to_pfn(S5PC1XX_PA_CHIPID),
+ .length = SZ_16,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_CLK,
+ .pfn = __phys_to_pfn(S5PC1XX_PA_CLK),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_PWR,
+ .pfn = __phys_to_pfn(S5PC1XX_PA_PWR),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)(S5PC1XX_VA_UART),
+ .pfn = __phys_to_pfn(S5PC1XX_PA_UART),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_VIC(0),
+ .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(0)),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_VIC(1),
+ .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(1)),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_VIC(2),
+ .pfn = __phys_to_pfn(S5PC1XX_PA_VIC(2)),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5PC1XX_VA_TIMER,
+ .pfn = __phys_to_pfn(S5PC1XX_PA_TIMER),
+ .length = SZ_256,
+ .type = MT_DEVICE,
+ },
+};
+
+/* read cpu identification code */
+
+void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
+{
+ unsigned long idcode;
+
+ /* initialise the io descriptors we need for initialisation */
+ iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
+ iotable_init(mach_desc, size);
+
+ idcode = __raw_readl(S5PC1XX_VA_CHIPID);
+ s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
new file mode 100644
index 0000000..f749bc5
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -0,0 +1,174 @@
+/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Based on plat-s3c64xx/dev-uart.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s5pc1xx_uart0_resource[] = {
+ [0] = {
+ .start = S3C_PA_UART0,
+ .end = S3C_PA_UART0 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX0,
+ .end = IRQ_S3CUART_RX0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_S3CUART_TX0,
+ .end = IRQ_S3CUART_TX0,
+ .flags = IORESOURCE_IRQ,
+
+ },
+ [3] = {
+ .start = IRQ_S3CUART_ERR0,
+ .end = IRQ_S3CUART_ERR0,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource s5pc1xx_uart1_resource[] = {
+ [0] = {
+ .start = S3C_PA_UART1,
+ .end = S3C_PA_UART1 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX1,
+ .end = IRQ_S3CUART_RX1,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_S3CUART_TX1,
+ .end = IRQ_S3CUART_TX1,
+ .flags = IORESOURCE_IRQ,
+
+ },
+ [3] = {
+ .start = IRQ_S3CUART_ERR1,
+ .end = IRQ_S3CUART_ERR1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource s5pc1xx_uart2_resource[] = {
+ [0] = {
+ .start = S3C_PA_UART2,
+ .end = S3C_PA_UART2 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX2,
+ .end = IRQ_S3CUART_RX2,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_S3CUART_TX2,
+ .end = IRQ_S3CUART_TX2,
+ .flags = IORESOURCE_IRQ,
+
+ },
+ [3] = {
+ .start = IRQ_S3CUART_ERR2,
+ .end = IRQ_S3CUART_ERR2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource s5pc1xx_uart3_resource[] = {
+ [0] = {
+ .start = S3C_PA_UART3,
+ .end = S3C_PA_UART3 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_S3CUART_RX3,
+ .end = IRQ_S3CUART_RX3,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_S3CUART_TX3,
+ .end = IRQ_S3CUART_TX3,
+ .flags = IORESOURCE_IRQ,
+
+ },
+ [3] = {
+ .start = IRQ_S3CUART_ERR3,
+ .end = IRQ_S3CUART_ERR3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
+ [0] = {
+ .resources = s5pc1xx_uart0_resource,
+ .nr_resources = ARRAY_SIZE(s5pc1xx_uart0_resource),
+ },
+ [1] = {
+ .resources = s5pc1xx_uart1_resource,
+ .nr_resources = ARRAY_SIZE(s5pc1xx_uart1_resource),
+ },
+ [2] = {
+ .resources = s5pc1xx_uart2_resource,
+ .nr_resources = ARRAY_SIZE(s5pc1xx_uart2_resource),
+ },
+ [3] = {
+ .resources = s5pc1xx_uart3_resource,
+ .nr_resources = ARRAY_SIZE(s5pc1xx_uart3_resource),
+ },
+};
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+ .id = 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+ .id = 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+ .id = 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+ .id = 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+ &s3c24xx_uart_device0,
+ &s3c24xx_uart_device1,
+ &s3c24xx_uart_device2,
+ &s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
+
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
new file mode 100644
index 0000000..f07d8c3
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -0,0 +1,182 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Common IRQ support
+ *
+ * Based on plat-s3c64xx/include/plat/irqs.h
+ */
+
+#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
+#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET (32)
+
+#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
+
+#define S3C_VIC0_BASE S3C_IRQ(0)
+#define S3C_VIC1_BASE S3C_IRQ(32)
+#define S3C_VIC2_BASE S3C_IRQ(64)
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S3CUART_BASE0 (16)
+#define IRQ_S3CUART_BASE1 (20)
+#define IRQ_S3CUART_BASE2 (24)
+#define IRQ_S3CUART_BASE3 (28)
+
+#define UART_IRQ_RXD (0)
+#define UART_IRQ_ERR (1)
+#define UART_IRQ_TXD (2)
+#define UART_IRQ_MODEM (3)
+
+#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
+
+/* VIC based IRQs */
+
+#define S5PC1XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x))
+#define S5PC1XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x))
+#define S5PC1XX_IRQ_VIC2(x) (S3C_VIC2_BASE + (x))
+
+/*
+ * VIC0: system, DMA, timer
+ */
+#define IRQ_EINT0 S5PC1XX_IRQ_VIC0(0)
+#define IRQ_EINT1 S5PC1XX_IRQ_VIC0(1)
+#define IRQ_EINT2 S5PC1XX_IRQ_VIC0(2)
+#define IRQ_EINT3 S5PC1XX_IRQ_VIC0(3)
+#define IRQ_EINT4 S5PC1XX_IRQ_VIC0(4)
+#define IRQ_EINT5 S5PC1XX_IRQ_VIC0(5)
+#define IRQ_EINT6 S5PC1XX_IRQ_VIC0(6)
+#define IRQ_EINT7 S5PC1XX_IRQ_VIC0(7)
+#define IRQ_EINT8 S5PC1XX_IRQ_VIC0(8)
+#define IRQ_EINT9 S5PC1XX_IRQ_VIC0(9)
+#define IRQ_EINT10 S5PC1XX_IRQ_VIC0(10)
+#define IRQ_EINT11 S5PC1XX_IRQ_VIC0(11)
+#define IRQ_EINT12 S5PC1XX_IRQ_VIC0(12)
+#define IRQ_EINT13 S5PC1XX_IRQ_VIC0(13)
+#define IRQ_EINT14 S5PC1XX_IRQ_VIC0(14)
+#define IRQ_EINT15 S5PC1XX_IRQ_VIC0(15)
+#define IRQ_EINT16_31 S5PC1XX_IRQ_VIC0(16)
+#define IRQ_BATF S5PC1XX_IRQ_VIC0(17)
+#define IRQ_MDMA S5PC1XX_IRQ_VIC0(18)
+#define IRQ_PDMA0 S5PC1XX_IRQ_VIC0(19)
+#define IRQ_PDMA1 S5PC1XX_IRQ_VIC0(20)
+#define IRQ_TIMER0 S5PC1XX_IRQ_VIC0(21)
+#define IRQ_TIMER1 S5PC1XX_IRQ_VIC0(22)
+#define IRQ_TIMER2 S5PC1XX_IRQ_VIC0(23)
+#define IRQ_TIMER3 S5PC1XX_IRQ_VIC0(24)
+#define IRQ_TIMER4 S5PC1XX_IRQ_VIC0(25)
+#define IRQ_SYSTIMER S5PC1XX_IRQ_VIC0(26)
+#define IRQ_WDT S5PC1XX_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM S5PC1XX_IRQ_VIC0(28)
+#define IRQ_RTC_TIC S5PC1XX_IRQ_VIC0(29)
+#define IRQ_GPIOINT S5PC1XX_IRQ_VIC0(30)
+
+/*
+ * VIC1: ARM, power, memory, connectivity
+ */
+#define IRQ_CORTEX0 S5PC1XX_IRQ_VIC1(0)
+#define IRQ_CORTEX1 S5PC1XX_IRQ_VIC1(1)
+#define IRQ_CORTEX2 S5PC1XX_IRQ_VIC1(2)
+#define IRQ_CORTEX3 S5PC1XX_IRQ_VIC1(3)
+#define IRQ_CORTEX4 S5PC1XX_IRQ_VIC1(4)
+#define IRQ_IEMAPC S5PC1XX_IRQ_VIC1(5)
+#define IRQ_IEMIEC S5PC1XX_IRQ_VIC1(6)
+#define IRQ_ONENAND S5PC1XX_IRQ_VIC1(7)
+#define IRQ_NFC S5PC1XX_IRQ_VIC1(8)
+#define IRQ_CFC S5PC1XX_IRQ_VIC1(9)
+#define IRQ_UART0 S5PC1XX_IRQ_VIC1(10)
+#define IRQ_UART1 S5PC1XX_IRQ_VIC1(11)
+#define IRQ_UART2 S5PC1XX_IRQ_VIC1(12)
+#define IRQ_UART3 S5PC1XX_IRQ_VIC1(13)
+#define IRQ_IIC S5PC1XX_IRQ_VIC1(14)
+#define IRQ_SPI0 S5PC1XX_IRQ_VIC1(15)
+#define IRQ_SPI1 S5PC1XX_IRQ_VIC1(16)
+#define IRQ_SPI2 S5PC1XX_IRQ_VIC1(17)
+#define IRQ_IRDA S5PC1XX_IRQ_VIC1(18)
+#define IRQ_CAN0 S5PC1XX_IRQ_VIC1(19)
+#define IRQ_CAN1 S5PC1XX_IRQ_VIC1(20)
+#define IRQ_HSIRX S5PC1XX_IRQ_VIC1(21)
+#define IRQ_HSITX S5PC1XX_IRQ_VIC1(22)
+#define IRQ_UHOST S5PC1XX_IRQ_VIC1(23)
+#define IRQ_OTG S5PC1XX_IRQ_VIC1(24)
+#define IRQ_MSM S5PC1XX_IRQ_VIC1(25)
+#define IRQ_HSMMC0 S5PC1XX_IRQ_VIC1(26)
+#define IRQ_HSMMC1 S5PC1XX_IRQ_VIC1(27)
+#define IRQ_HSMMC2 S5PC1XX_IRQ_VIC1(28)
+#define IRQ_MIPICSI S5PC1XX_IRQ_VIC1(29)
+#define IRQ_MIPIDSI S5PC1XX_IRQ_VIC1(30)
+
+/*
+ * VIC2: multimedia, audio, security
+ */
+#define IRQ_LCD0 S5PC1XX_IRQ_VIC2(0)
+#define IRQ_LCD1 S5PC1XX_IRQ_VIC2(1)
+#define IRQ_LCD2 S5PC1XX_IRQ_VIC2(2)
+#define IRQ_LCD3 S5PC1XX_IRQ_VIC2(3)
+#define IRQ_ROTATOR S5PC1XX_IRQ_VIC2(4)
+#define IRQ_FIMC0 S5PC1XX_IRQ_VIC2(5)
+#define IRQ_FIMC1 S5PC1XX_IRQ_VIC2(6)
+#define IRQ_FIMC2 S5PC1XX_IRQ_VIC2(7)
+#define IRQ_JPEG S5PC1XX_IRQ_VIC2(8)
+#define IRQ_2D S5PC1XX_IRQ_VIC2(9)
+#define IRQ_3D S5PC1XX_IRQ_VIC2(10)
+#define IRQ_MIXER S5PC1XX_IRQ_VIC2(11)
+#define IRQ_HDMI S5PC1XX_IRQ_VIC2(12)
+#define IRQ_IIC1 S5PC1XX_IRQ_VIC2(13)
+#define IRQ_MFC S5PC1XX_IRQ_VIC2(14)
+#define IRQ_TVENC S5PC1XX_IRQ_VIC2(15)
+#define IRQ_I2S0 S5PC1XX_IRQ_VIC2(16)
+#define IRQ_I2S1 S5PC1XX_IRQ_VIC2(17)
+#define IRQ_I2S2 S5PC1XX_IRQ_VIC2(18)
+#define IRQ_AC97 S5PC1XX_IRQ_VIC2(19)
+#define IRQ_PCM0 S5PC1XX_IRQ_VIC2(20)
+#define IRQ_PCM1 S5PC1XX_IRQ_VIC2(21)
+#define IRQ_SPDIF S5PC1XX_IRQ_VIC2(22)
+#define IRQ_ADC S5PC1XX_IRQ_VIC2(23)
+#define IRQ_PENDN S5PC1XX_IRQ_VIC2(24)
+#define IRQ_TC IRQ_PENDN
+#define IRQ_KEYPAD S5PC1XX_IRQ_VIC2(25)
+#define IRQ_CG S5PC1XX_IRQ_VIC2(26)
+#define IRQ_SEC S5PC1XX_IRQ_VIC2(27)
+#define IRQ_SECRX S5PC1XX_IRQ_VIC2(28)
+#define IRQ_SECTX S5PC1XX_IRQ_VIC2(29)
+#define IRQ_SDMIRQ S5PC1XX_IRQ_VIC2(30)
+#define IRQ_SDMFIQ S5PC1XX_IRQ_VIC2(31)
+
+#define S3C_IRQ_EINT_BASE (IRQ_SDMFIQ + 1)
+
+#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x) S3C_EINT(x)
+
+#define NR_IRQS (IRQ_EINT(31)+1)
+
+#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
+
diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h
new file mode 100644
index 0000000..21afef1
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/pll.h
@@ -0,0 +1,38 @@
+/* arch/arm/plat-s5pc1xx/include/plat/pll.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX PLL code
+ *
+ * Based on plat-s3c64xx/include/plat/pll.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5P_PLL_MDIV_MASK ((1 << (25-16+1)) - 1)
+#define S5P_PLL_PDIV_MASK ((1 << (13-8+1)) - 1)
+#define S5P_PLL_SDIV_MASK ((1 << (2-0+1)) - 1)
+#define S5P_PLL_MDIV_SHIFT (16)
+#define S5P_PLL_PDIV_SHIFT (8)
+#define S5P_PLL_SDIV_SHIFT (0)
+
+#include <asm/div64.h>
+
+static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
+ u32 pllcon)
+{
+ u32 mdiv, pdiv, sdiv;
+ u64 fvco = baseclk;
+
+ mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
+ pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
+ sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
+
+ fvco *= mdiv;
+ do_div(fvco, (pdiv << sdiv));
+
+ return (unsigned long)fvco;
+}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
new file mode 100644
index 0000000..75c8390
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -0,0 +1,421 @@
+/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+#define S5PC1XX_CLKREG(x) (S5PC1XX_VA_CLK + (x))
+
+#define S5PC1XX_APLL_LOCK S5PC1XX_CLKREG(0x00)
+#define S5PC1XX_MPLL_LOCK S5PC1XX_CLKREG(0x04)
+#define S5PC1XX_EPLL_LOCK S5PC1XX_CLKREG(0x08)
+#define S5PC100_HPLL_LOCK S5PC1XX_CLKREG(0x0C)
+
+#define S5PC1XX_APLL_CON S5PC1XX_CLKREG(0x100)
+#define S5PC1XX_MPLL_CON S5PC1XX_CLKREG(0x104)
+#define S5PC1XX_EPLL_CON S5PC1XX_CLKREG(0x108)
+#define S5PC100_HPLL_CON S5PC1XX_CLKREG(0x10C)
+
+#define S5PC1XX_CLK_SRC0 S5PC1XX_CLKREG(0x200)
+#define S5PC1XX_CLK_SRC1 S5PC1XX_CLKREG(0x204)
+#define S5PC1XX_CLK_SRC2 S5PC1XX_CLKREG(0x208)
+#define S5PC1XX_CLK_SRC3 S5PC1XX_CLKREG(0x20C)
+
+#define S5PC1XX_CLK_DIV0 S5PC1XX_CLKREG(0x300)
+#define S5PC1XX_CLK_DIV1 S5PC1XX_CLKREG(0x304)
+#define S5PC1XX_CLK_DIV2 S5PC1XX_CLKREG(0x308)
+#define S5PC1XX_CLK_DIV3 S5PC1XX_CLKREG(0x30C)
+#define S5PC1XX_CLK_DIV4 S5PC1XX_CLKREG(0x310)
+
+#define S5PC100_CLK_OUT S5PC1XX_CLKREG(0x400)
+
+#define S5PC100_CLKGATE_D00 S5PC1XX_CLKREG(0x500)
+#define S5PC100_CLKGATE_D01 S5PC1XX_CLKREG(0x504)
+#define S5PC100_CLKGATE_D02 S5PC1XX_CLKREG(0x508)
+
+#define S5PC100_CLKGATE_D10 S5PC1XX_CLKREG(0x520)
+#define S5PC100_CLKGATE_D11 S5PC1XX_CLKREG(0x524)
+#define S5PC100_CLKGATE_D12 S5PC1XX_CLKREG(0x528)
+#define S5PC100_CLKGATE_D13 S5PC1XX_CLKREG(0x52C)
+#define S5PC100_CLKGATE_D14 S5PC1XX_CLKREG(0x530)
+#define S5PC100_CLKGATE_D15 S5PC1XX_CLKREG(0x534)
+
+#define S5PC100_CLKGATE_D20 S5PC1XX_CLKREG(0x540)
+
+#define S5PC100_SCLKGATE0 S5PC1XX_CLKREG(0x560)
+#define S5PC100_SCLKGATE1 S5PC1XX_CLKREG(0x564)
+
+#define S5PC100_OTHERS S5PC1XX_CLKREG(0x8200)
+
+#define S5PC1XX_EPLL_EN (1<<31)
+#define S5PC1XX_EPLL_MASK 0xffffffff
+#define S5PC1XX_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
+
+/* CLKSRC0 */
+#define S5PC1XX_CLKSRC0_APLL_MASK (0x1<<0)
+#define S5PC1XX_CLKSRC0_APLL_SHIFT (0)
+#define S5PC1XX_CLKSRC0_MPLL_MASK (0x1<<4)
+#define S5PC1XX_CLKSRC0_MPLL_SHIFT (4)
+#define S5PC1XX_CLKSRC0_EPLL_MASK (0x1<<8)
+#define S5PC1XX_CLKSRC0_EPLL_SHIFT (8)
+#define S5PC100_CLKSRC0_HPLL_MASK (0x1<<12)
+#define S5PC100_CLKSRC0_HPLL_SHIFT (12)
+#define S5PC100_CLKSRC0_AMMUX_MASK (0x1<<16)
+#define S5PC100_CLKSRC0_AMMUX_SHIFT (16)
+#define S5PC100_CLKSRC0_HREF_MASK (0x1<<20)
+#define S5PC100_CLKSRC0_HREF_SHIFT (20)
+#define S5PC1XX_CLKSRC0_ONENAND_MASK (0x1<<24)
+#define S5PC1XX_CLKSRC0_ONENAND_SHIFT (24)
+
+
+/* CLKSRC1 */
+#define S5PC100_CLKSRC1_UART_MASK (0x1<<0)
+#define S5PC100_CLKSRC1_UART_SHIFT (0)
+#define S5PC100_CLKSRC1_SPI0_MASK (0x3<<4)
+#define S5PC100_CLKSRC1_SPI0_SHIFT (4)
+#define S5PC100_CLKSRC1_SPI1_MASK (0x3<<8)
+#define S5PC100_CLKSRC1_SPI1_SHIFT (8)
+#define S5PC100_CLKSRC1_SPI2_MASK (0x3<<12)
+#define S5PC100_CLKSRC1_SPI2_SHIFT (12)
+#define S5PC100_CLKSRC1_IRDA_MASK (0x3<<16)
+#define S5PC100_CLKSRC1_IRDA_SHIFT (16)
+#define S5PC100_CLKSRC1_UHOST_MASK (0x3<<20)
+#define S5PC100_CLKSRC1_UHOST_SHIFT (20)
+#define S5PC100_CLKSRC1_CLK48M_MASK (0x1<<24)
+#define S5PC100_CLKSRC1_CLK48M_SHIFT (24)
+
+/* CLKSRC2 */
+#define S5PC100_CLKSRC2_MMC0_MASK (0x3<<0)
+#define S5PC100_CLKSRC2_MMC0_SHIFT (0)
+#define S5PC100_CLKSRC2_MMC1_MASK (0x3<<4)
+#define S5PC100_CLKSRC2_MMC1_SHIFT (4)
+#define S5PC100_CLKSRC2_MMC2_MASK (0x3<<8)
+#define S5PC100_CLKSRC2_MMC2_SHIFT (8)
+#define S5PC100_CLKSRC2_LCD_MASK (0x3<<12)
+#define S5PC100_CLKSRC2_LCD_SHIFT (12)
+#define S5PC100_CLKSRC2_FIMC0_MASK (0x3<<16)
+#define S5PC100_CLKSRC2_FIMC0_SHIFT (16)
+#define S5PC100_CLKSRC2_FIMC1_MASK (0x3<<20)
+#define S5PC100_CLKSRC2_FIMC1_SHIFT (20)
+#define S5PC100_CLKSRC2_FIMC2_MASK (0x3<<24)
+#define S5PC100_CLKSRC2_FIMC2_SHIFT (24)
+#define S5PC100_CLKSRC2_MIXER_MASK (0x3<<28)
+#define S5PC100_CLKSRC2_MIXER_SHIFT (28)
+
+/* CLKSRC3 */
+#define S5PC100_CLKSRC3_PWI_MASK (0x3<<0)
+#define S5PC100_CLKSRC3_PWI_SHIFT (0)
+#define S5PC100_CLKSRC3_HCLKD2_MASK (0x1<<4)
+#define S5PC100_CLKSRC3_HCLKD2_SHIFT (4)
+#define S5PC100_CLKSRC3_I2SD2_MASK (0x3<<8)
+#define S5PC100_CLKSRC3_I2SD2_SHIFT (8)
+#define S5PC100_CLKSRC3_AUDIO0_MASK (0x7<<12)
+#define S5PC100_CLKSRC3_AUDIO0_SHIFT (12)
+#define S5PC100_CLKSRC3_AUDIO1_MASK (0x7<<16)
+#define S5PC100_CLKSRC3_AUDIO1_SHIFT (16)
+#define S5PC100_CLKSRC3_AUDIO2_MASK (0x7<<20)
+#define S5PC100_CLKSRC3_AUDIO2_SHIFT (20)
+#define S5PC100_CLKSRC3_SPDIF_MASK (0x3<<24)
+#define S5PC100_CLKSRC3_SPDIF_SHIFT (24)
+
+
+/* CLKDIV0 */
+#define S5PC1XX_CLKDIV0_APLL_MASK (0x1<<0)
+#define S5PC1XX_CLKDIV0_APLL_SHIFT (0)
+#define S5PC100_CLKDIV0_ARM_MASK (0x7<<4)
+#define S5PC100_CLKDIV0_ARM_SHIFT (4)
+#define S5PC100_CLKDIV0_D0_MASK (0x7<<8)
+#define S5PC100_CLKDIV0_D0_SHIFT (8)
+#define S5PC100_CLKDIV0_PCLKD0_MASK (0x7<<12)
+#define S5PC100_CLKDIV0_PCLKD0_SHIFT (12)
+#define S5PC100_CLKDIV0_SECSS_MASK (0x7<<16)
+#define S5PC100_CLKDIV0_SECSS_SHIFT (16)
+
+/* CLKDIV1 */
+#define S5PC100_CLKDIV1_AM_MASK (0x7<<0)
+#define S5PC100_CLKDIV1_AM_SHIFT (0)
+#define S5PC100_CLKDIV1_MPLL_MASK (0x3<<4)
+#define S5PC100_CLKDIV1_MPLL_SHIFT (4)
+#define S5PC100_CLKDIV1_MPLL2_MASK (0x1<<8)
+#define S5PC100_CLKDIV1_MPLL2_SHIFT (8)
+#define S5PC100_CLKDIV1_D1_MASK (0x7<<12)
+#define S5PC100_CLKDIV1_D1_SHIFT (12)
+#define S5PC100_CLKDIV1_PCLKD1_MASK (0x7<<16)
+#define S5PC100_CLKDIV1_PCLKD1_SHIFT (16)
+#define S5PC100_CLKDIV1_ONENAND_MASK (0x3<<20)
+#define S5PC100_CLKDIV1_ONENAND_SHIFT (20)
+#define S5PC100_CLKDIV1_CAM_MASK (0x1F<<24)
+#define S5PC100_CLKDIV1_CAM_SHIFT (24)
+
+/* CLKDIV2 */
+#define S5PC100_CLKDIV2_UART_MASK (0x7<<0)
+#define S5PC100_CLKDIV2_UART_SHIFT (0)
+#define S5PC100_CLKDIV2_SPI0_MASK (0xf<<4)
+#define S5PC100_CLKDIV2_SPI0_SHIFT (4)
+#define S5PC100_CLKDIV2_SPI1_MASK (0xf<<8)
+#define S5PC100_CLKDIV2_SPI1_SHIFT (8)
+#define S5PC100_CLKDIV2_SPI2_MASK (0xf<<12)
+#define S5PC100_CLKDIV2_SPI2_SHIFT (12)
+#define S5PC100_CLKDIV2_IRDA_MASK (0xf<<16)
+#define S5PC100_CLKDIV2_IRDA_SHIFT (16)
+#define S5PC100_CLKDIV2_UHOST_MASK (0xf<<20)
+#define S5PC100_CLKDIV2_UHOST_SHIFT (20)
+
+/* CLKDIV3 */
+#define S5PC100_CLKDIV3_MMC0_MASK (0xf<<0)
+#define S5PC100_CLKDIV3_MMC0_SHIFT (0)
+#define S5PC100_CLKDIV3_MMC1_MASK (0xf<<4)
+#define S5PC100_CLKDIV3_MMC1_SHIFT (4)
+#define S5PC100_CLKDIV3_MMC2_MASK (0xf<<8)
+#define S5PC100_CLKDIV3_MMC2_SHIFT (8)
+#define S5PC100_CLKDIV3_LCD_MASK (0xf<<12)
+#define S5PC100_CLKDIV3_LCD_SHIFT (12)
+#define S5PC100_CLKDIV3_FIMC0_MASK (0xf<<16)
+#define S5PC100_CLKDIV3_FIMC0_SHIFT (16)
+#define S5PC100_CLKDIV3_FIMC1_MASK (0xf<<20)
+#define S5PC100_CLKDIV3_FIMC1_SHIFT (20)
+#define S5PC100_CLKDIV3_FIMC2_MASK (0xf<<24)
+#define S5PC100_CLKDIV3_FIMC2_SHIFT (24)
+#define S5PC100_CLKDIV3_HDMI_MASK (0xf<<28)
+#define S5PC100_CLKDIV3_HDMI_SHIFT (28)
+
+/* CLKDIV4 */
+#define S5PC100_CLKDIV4_PWI_MASK (0x7<<0)
+#define S5PC100_CLKDIV4_PWI_SHIFT (0)
+#define S5PC100_CLKDIV4_HCLKD2_MASK (0x7<<4)
+#define S5PC100_CLKDIV4_HCLKD2_SHIFT (4)
+#define S5PC100_CLKDIV4_I2SD2_MASK (0xf<<8)
+#define S5PC100_CLKDIV4_I2SD2_SHIFT (8)
+#define S5PC100_CLKDIV4_AUDIO0_MASK (0xf<<12)
+#define S5PC100_CLKDIV4_AUDIO0_SHIFT (12)
+#define S5PC100_CLKDIV4_AUDIO1_MASK (0xf<<16)
+#define S5PC100_CLKDIV4_AUDIO1_SHIFT (16)
+#define S5PC100_CLKDIV4_AUDIO2_MASK (0xf<<20)
+#define S5PC100_CLKDIV4_AUDIO2_SHIFT (20)
+
+
+/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D00_INTC (1<<0)
+#define S5PC100_CLKGATE_D00_TZIC (1<<1)
+#define S5PC100_CLKGATE_D00_CFCON (1<<2)
+#define S5PC100_CLKGATE_D00_MDMA (1<<3)
+#define S5PC100_CLKGATE_D00_G2D (1<<4)
+#define S5PC100_CLKGATE_D00_SECSS (1<<5)
+#define S5PC100_CLKGATE_D00_CSSYS (1<<6)
+
+/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D01_DMC (1<<0)
+#define S5PC100_CLKGATE_D01_SROMC (1<<1)
+#define S5PC100_CLKGATE_D01_ONENAND (1<<2)
+#define S5PC100_CLKGATE_D01_NFCON (1<<3)
+#define S5PC100_CLKGATE_D01_INTMEM (1<<4)
+#define S5PC100_CLKGATE_D01_EBI (1<<5)
+
+/* PCLKD0 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D02_SECKEY (1<<1)
+#define S5PC100_CLKGATE_D02_SDM (1<<2)
+
+/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D10_PDMA0 (1<<0)
+#define S5PC100_CLKGATE_D10_PDMA1 (1<<1)
+#define S5PC100_CLKGATE_D10_USBHOST (1<<2)
+#define S5PC100_CLKGATE_D10_USBOTG (1<<3)
+#define S5PC100_CLKGATE_D10_MODEMIF (1<<4)
+#define S5PC100_CLKGATE_D10_HSMMC0 (1<<5)
+#define S5PC100_CLKGATE_D10_HSMMC1 (1<<6)
+#define S5PC100_CLKGATE_D10_HSMMC2 (1<<7)
+
+/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D11_LCD (1<<0)
+#define S5PC100_CLKGATE_D11_ROTATOR (1<<1)
+#define S5PC100_CLKGATE_D11_FIMC0 (1<<2)
+#define S5PC100_CLKGATE_D11_FIMC1 (1<<3)
+#define S5PC100_CLKGATE_D11_FIMC2 (1<<4)
+#define S5PC100_CLKGATE_D11_JPEG (1<<5)
+#define S5PC100_CLKGATE_D11_DSI (1<<6)
+#define S5PC100_CLKGATE_D11_CSI (1<<7)
+#define S5PC100_CLKGATE_D11_G3D (1<<8)
+
+/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D12_TV (1<<0)
+#define S5PC100_CLKGATE_D12_VP (1<<1)
+#define S5PC100_CLKGATE_D12_MIXER (1<<2)
+#define S5PC100_CLKGATE_D12_HDMI (1<<3)
+#define S5PC100_CLKGATE_D12_MFC (1<<4)
+
+/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
+#define S5PC100_CLKGATE_D13_CHIPID (1<<0)
+#define S5PC100_CLKGATE_D13_GPIO (1<<1)
+#define S5PC100_CLKGATE_D13_APC (1<<2)
+#define S5PC100_CLKGATE_D13_IEC (1<<3)
+#define S5PC100_CLKGATE_D13_PWM (1<<6)
+#define S5PC100_CLKGATE_D13_SYSTIMER (1<<7)
+#define S5PC100_CLKGATE_D13_WDT (1<<8)
+#define S5PC100_CLKGATE_D13_RTC (1<<9)
+
+/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
+#define S5PC100_CLKGATE_D14_UART0 (1<<0)
+#define S5PC100_CLKGATE_D14_UART1 (1<<1)
+#define S5PC100_CLKGATE_D14_UART2 (1<<2)
+#define S5PC100_CLKGATE_D14_UART3 (1<<3)
+#define S5PC100_CLKGATE_D14_IIC (1<<4)
+#define S5PC100_CLKGATE_D14_HDMI_IIC (1<<5)
+#define S5PC100_CLKGATE_D14_SPI0 (1<<6)
+#define S5PC100_CLKGATE_D14_SPI1 (1<<7)
+#define S5PC100_CLKGATE_D14_SPI2 (1<<8)
+#define S5PC100_CLKGATE_D14_IRDA (1<<9)
+#define S5PC100_CLKGATE_D14_CCAN0 (1<<10)
+#define S5PC100_CLKGATE_D14_CCAN1 (1<<11)
+#define S5PC100_CLKGATE_D14_HSITX (1<<12)
+#define S5PC100_CLKGATE_D14_HSIRX (1<<13)
+
+/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
+#define S5PC100_CLKGATE_D15_IIS0 (1<<0)
+#define S5PC100_CLKGATE_D15_IIS1 (1<<1)
+#define S5PC100_CLKGATE_D15_IIS2 (1<<2)
+#define S5PC100_CLKGATE_D15_AC97 (1<<3)
+#define S5PC100_CLKGATE_D15_PCM0 (1<<4)
+#define S5PC100_CLKGATE_D15_PCM1 (1<<5)
+#define S5PC100_CLKGATE_D15_SPDIF (1<<6)
+#define S5PC100_CLKGATE_D15_TSADC (1<<7)
+#define S5PC100_CLKGATE_D15_KEYIF (1<<8)
+#define S5PC100_CLKGATE_D15_CG (1<<9)
+
+/* HCLKD2 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D20_HCLKD2 (1<<0)
+#define S5PC100_CLKGATE_D20_I2SD2 (1<<1)
+
+/* Special Clock Gate 0 Registers */
+#define S5PC1XX_CLKGATE_SCLK0_HPM (1<<0)
+#define S5PC1XX_CLKGATE_SCLK0_PWI (1<<1)
+#define S5PC100_CLKGATE_SCLK0_ONENAND (1<<2)
+#define S5PC100_CLKGATE_SCLK0_UART (1<<3)
+#define S5PC100_CLKGATE_SCLK0_SPI0 (1<<4)
+#define S5PC100_CLKGATE_SCLK0_SPI1 (1<<5)
+#define S5PC100_CLKGATE_SCLK0_SPI2 (1<<6)
+#define S5PC100_CLKGATE_SCLK0_SPI0_48 (1<<7)
+#define S5PC100_CLKGATE_SCLK0_SPI1_48 (1<<8)
+#define S5PC100_CLKGATE_SCLK0_SPI2_48 (1<<9)
+#define S5PC100_CLKGATE_SCLK0_IRDA (1<<10)
+#define S5PC100_CLKGATE_SCLK0_USBHOST (1<<11)
+#define S5PC100_CLKGATE_SCLK0_MMC0 (1<<12)
+#define S5PC100_CLKGATE_SCLK0_MMC1 (1<<13)
+#define S5PC100_CLKGATE_SCLK0_MMC2 (1<<14)
+#define S5PC100_CLKGATE_SCLK0_MMC0_48 (1<<15)
+#define S5PC100_CLKGATE_SCLK0_MMC1_48 (1<<16)
+#define S5PC100_CLKGATE_SCLK0_MMC2_48 (1<<17)
+
+/* Special Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_SCLK1_LCD (1<<0)
+#define S5PC100_CLKGATE_SCLK1_FIMC0 (1<<1)
+#define S5PC100_CLKGATE_SCLK1_FIMC1 (1<<2)
+#define S5PC100_CLKGATE_SCLK1_FIMC2 (1<<3)
+#define S5PC100_CLKGATE_SCLK1_TV54 (1<<4)
+#define S5PC100_CLKGATE_SCLK1_VDAC54 (1<<5)
+#define S5PC100_CLKGATE_SCLK1_MIXER (1<<6)
+#define S5PC100_CLKGATE_SCLK1_HDMI (1<<7)
+#define S5PC100_CLKGATE_SCLK1_AUDIO0 (1<<8)
+#define S5PC100_CLKGATE_SCLK1_AUDIO1 (1<<9)
+#define S5PC100_CLKGATE_SCLK1_AUDIO2 (1<<10)
+#define S5PC100_CLKGATE_SCLK1_SPDIF (1<<11)
+#define S5PC100_CLKGATE_SCLK1_CAM (1<<12)
+
+/* register for power management */
+#define S5PC100_PWR_CFG S5PC1XX_CLKREG(0x8000)
+#define S5PC100_EINT_WAKEUP_MASK S5PC1XX_CLKREG(0x8004)
+#define S5PC100_NORMAL_CFG S5PC1XX_CLKREG(0x8010)
+#define S5PC100_STOP_CFG S5PC1XX_CLKREG(0x8014)
+#define S5PC100_SLEEP_CFG S5PC1XX_CLKREG(0x8018)
+#define S5PC100_STOP_MEM_CFG S5PC1XX_CLKREG(0x801C)
+#define S5PC100_OSC_FREQ S5PC1XX_CLKREG(0x8100)
+#define S5PC100_OSC_STABLE S5PC1XX_CLKREG(0x8104)
+#define S5PC100_PWR_STABLE S5PC1XX_CLKREG(0x8108)
+#define S5PC100_MTC_STABLE S5PC1XX_CLKREG(0x8110)
+#define S5PC100_CLAMP_STABLE S5PC1XX_CLKREG(0x8114)
+#define S5PC100_OTHERS S5PC1XX_CLKREG(0x8200)
+#define S5PC100_RST_STAT S5PC1XX_CLKREG(0x8300)
+#define S5PC100_WAKEUP_STAT S5PC1XX_CLKREG(0x8304)
+#define S5PC100_BLK_PWR_STAT S5PC1XX_CLKREG(0x8308)
+#define S5PC100_INFORM0 S5PC1XX_CLKREG(0x8400)
+#define S5PC100_INFORM1 S5PC1XX_CLKREG(0x8404)
+#define S5PC100_INFORM2 S5PC1XX_CLKREG(0x8408)
+#define S5PC100_INFORM3 S5PC1XX_CLKREG(0x840C)
+#define S5PC100_INFORM4 S5PC1XX_CLKREG(0x8410)
+#define S5PC100_INFORM5 S5PC1XX_CLKREG(0x8414)
+#define S5PC100_INFORM6 S5PC1XX_CLKREG(0x8418)
+#define S5PC100_INFORM7 S5PC1XX_CLKREG(0x841C)
+#define S5PC100_DCGIDX_MAP0 S5PC1XX_CLKREG(0x8500)
+#define S5PC100_DCGIDX_MAP1 S5PC1XX_CLKREG(0x8504)
+#define S5PC100_DCGIDX_MAP2 S5PC1XX_CLKREG(0x8508)
+#define S5PC100_DCGPERF_MAP0 S5PC1XX_CLKREG(0x850C)
+#define S5PC100_DCGPERF_MAP1 S5PC1XX_CLKREG(0x8510)
+#define S5PC100_DVCIDX_MAP S5PC1XX_CLKREG(0x8514)
+#define S5PC100_FREQ_CPU S5PC1XX_CLKREG(0x8518)
+#define S5PC100_FREQ_DPM S5PC1XX_CLKREG(0x851C)
+#define S5PC100_DVSEMCLK_EN S5PC1XX_CLKREG(0x8520)
+#define S5PC100_APLL_CON_L8 S5PC1XX_CLKREG(0x8600)
+#define S5PC100_APLL_CON_L7 S5PC1XX_CLKREG(0x8604)
+#define S5PC100_APLL_CON_L6 S5PC1XX_CLKREG(0x8608)
+#define S5PC100_APLL_CON_L5 S5PC1XX_CLKREG(0x860C)
+#define S5PC100_APLL_CON_L4 S5PC1XX_CLKREG(0x8610)
+#define S5PC100_APLL_CON_L3 S5PC1XX_CLKREG(0x8614)
+#define S5PC100_APLL_CON_L2 S5PC1XX_CLKREG(0x8618)
+#define S5PC100_APLL_CON_L1 S5PC1XX_CLKREG(0x861C)
+#define S5PC100_IEM_CONTROL S5PC1XX_CLKREG(0x8620)
+#define S5PC100_CLKDIV_IEM_L8 S5PC1XX_CLKREG(0x8700)
+#define S5PC100_CLKDIV_IEM_L7 S5PC1XX_CLKREG(0x8704)
+#define S5PC100_CLKDIV_IEM_L6 S5PC1XX_CLKREG(0x8708)
+#define S5PC100_CLKDIV_IEM_L5 S5PC1XX_CLKREG(0x870C)
+#define S5PC100_CLKDIV_IEM_L4 S5PC1XX_CLKREG(0x8710)
+#define S5PC100_CLKDIV_IEM_L3 S5PC1XX_CLKREG(0x8714)
+#define S5PC100_CLKDIV_IEM_L2 S5PC1XX_CLKREG(0x8718)
+#define S5PC100_CLKDIV_IEM_L1 S5PC1XX_CLKREG(0x871C)
+#define S5PC100_IEM_HPMCLK_DIV S5PC1XX_CLKREG(0x8724)
+
+#define S5PC100_SWRESET S5PC1XX_CLKREG(0x100000)
+#define S5PC100_OND_SWRESET S5PC1XX_CLKREG(0x100008)
+#define S5PC100_GEN_CTRL S5PC1XX_CLKREG(0x100100)
+#define S5PC100_GEN_STATUS S5PC1XX_CLKREG(0x100104)
+#define S5PC100_MEM_SYS_CFG S5PC1XX_CLKREG(0x100200)
+#define S5PC100_CAM_MUX_SEL S5PC1XX_CLKREG(0x100300)
+#define S5PC100_MIXER_OUT_SEL S5PC1XX_CLKREG(0x100304)
+#define S5PC100_LPMP_MODE_SEL S5PC1XX_CLKREG(0x100308)
+#define S5PC100_MIPI_PHY_CON0 S5PC1XX_CLKREG(0x100400)
+#define S5PC100_MIPI_PHY_CON1 S5PC1XX_CLKREG(0x100414)
+#define S5PC100_HDMI_PHY_CON0 S5PC1XX_CLKREG(0x100420)
+
+#define S5PC100_CFG_WFI_CLEAN (~(3<<5))
+#define S5PC100_CFG_WFI_IDLE (1<<5)
+#define S5PC100_CFG_WFI_STOP (2<<5)
+#define S5PC100_CFG_WFI_SLEEP (3<<5)
+
+#define S5PC100_OTHER_SYS_INT 24
+#define S5PC100_OTHER_STA_TYPE 23
+#define STA_TYPE_EXPON 0
+#define STA_TYPE_SFR 1
+
+#define S5PC100_PWR_STA_EXP_SCALE 0
+#define S5PC100_PWR_STA_CNT 4
+
+#define S5PC100_PWR_STABLE_COUNT 85500
+
+#define S5PC100_SLEEP_CFG_OSC_EN 0
+
+/* OTHERS Resgister */
+#define S5PC100_OTHERS_USB_SIG_MASK (1 << 16)
+#define S5PC100_OTHERS_MIPI_DPHY_EN (1 << 28)
+
+/* MIPI D-PHY Control Register 0 */
+#define S5PC100_MIPI_PHY_CON0_M_RESETN (1 << 1)
+#define S5PC100_MIPI_PHY_CON0_S_RESETN (1 << 0)
+
+#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
new file mode 100644
index 0000000..45e2751
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
@@ -0,0 +1,65 @@
+/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Header file for s5pc100 cpu support
+ *
+ * Based on plat-s3c64xx/include/plat/s3c6400.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PC100 related SoCs */
+extern int s5pc100_init(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+extern int s5pc100_register_baseclocks(unsigned long xtal);
+extern void s5pc100_init_irq(void);
+extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
+extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pc100_register_clocks(void);
+extern void s5pc100_setup_clocks(void);
+extern struct sysdev_class s5pc100_sysclass;
+
+#define s5pc100_init_uarts s5pc100_common_init_uarts
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
+extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
+extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
+extern struct clk clk_hpll;
+extern struct clk clk_hd0;
+extern struct clk clk_pd0;
+extern struct clk clk_54m;
+extern struct clk clk_dout_mpll2;
+extern void s5pc1xx_register_clocks(void);
+extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable);
+extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
+extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
+extern struct platform_device s3c_device_g2d;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_vpp;
+extern struct platform_device s3c_device_tvenc;
+extern struct platform_device s3c_device_tvscaler;
+extern struct platform_device s3c_device_rotator;
+extern struct platform_device s3c_device_jpeg;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c_device_usb_otghcd;
+extern struct platform_device s3c_device_keypad;
+extern struct platform_device s3c_device_ts;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_smc911x;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_mfc;
+extern struct platform_device s3c_device_ac97;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_fimc2;
+
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
new file mode 100644
index 0000000..80d6dd9
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -0,0 +1,259 @@
+/* arch/arm/plat-s5pc1xx/irq.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Interrupt handling
+ *
+ * Based on plat-s3c64xx/irq.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/cpu.h>
+
+/* Timer interrupt handling */
+
+static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
+{
+ generic_handle_irq(sub_irq);
+}
+
+static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_timer(irq, IRQ_TIMER0);
+}
+
+static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_timer(irq, IRQ_TIMER1);
+}
+
+static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_timer(irq, IRQ_TIMER2);
+}
+
+static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_timer(irq, IRQ_TIMER3);
+}
+
+static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
+{
+ s3c_irq_demux_timer(irq, IRQ_TIMER4);
+}
+
+/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
+
+static void s3c_irq_timer_mask(unsigned int irq)
+{
+ u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+ reg &= 0x1f; /* mask out pending interrupts */
+ reg &= ~(1 << (irq - IRQ_TIMER0));
+ __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_unmask(unsigned int irq)
+{
+ u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+ reg &= 0x1f; /* mask out pending interrupts */
+ reg |= 1 << (irq - IRQ_TIMER0);
+ __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_ack(unsigned int irq)
+{
+ u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+ reg &= 0x1f;
+ reg |= (1 << 5) << (irq - IRQ_TIMER0);
+ __raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static struct irq_chip s3c_irq_timer = {
+ .name = "s3c-timer",
+ .mask = s3c_irq_timer_mask,
+ .unmask = s3c_irq_timer_unmask,
+ .ack = s3c_irq_timer_ack,
+};
+
+struct uart_irq {
+ void __iomem *regs;
+ unsigned int base_irq;
+ unsigned int parent_irq;
+};
+
+/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+static struct uart_irq uart_irqs[] = {
+ [0] = {
+ .regs = (void *)S3C_VA_UART0,
+ .base_irq = IRQ_S3CUART_BASE0,
+ .parent_irq = IRQ_UART0,
+ },
+ [1] = {
+ .regs = (void *)S3C_VA_UART1,
+ .base_irq = IRQ_S3CUART_BASE1,
+ .parent_irq = IRQ_UART1,
+ },
+ [2] = {
+ .regs = (void *)S3C_VA_UART2,
+ .base_irq = IRQ_S3CUART_BASE2,
+ .parent_irq = IRQ_UART2,
+ },
+ [3] = {
+ .regs = (void *)S3C_VA_UART3,
+ .base_irq = IRQ_S3CUART_BASE3,
+ .parent_irq = IRQ_UART3,
+ },
+};
+
+static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
+{
+ struct uart_irq *uirq = get_irq_chip_data(irq);
+ return uirq->regs;
+}
+
+static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
+{
+ return irq & 3;
+}
+
+/* UART interrupt registers, not worth adding to seperate include header */
+#define S3C64XX_UINTP 0x30
+#define S3C64XX_UINTSP 0x34
+#define S3C64XX_UINTM 0x38
+
+static void s3c_irq_uart_mask(unsigned int irq)
+{
+ void __iomem *regs = s3c_irq_uart_base(irq);
+ unsigned int bit = s3c_irq_uart_bit(irq);
+ u32 reg;
+
+ reg = __raw_readl(regs + S3C64XX_UINTM);
+ reg |= (1 << bit);
+ __raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_maskack(unsigned int irq)
+{
+ void __iomem *regs = s3c_irq_uart_base(irq);
+ unsigned int bit = s3c_irq_uart_bit(irq);
+ u32 reg;
+
+ reg = __raw_readl(regs + S3C64XX_UINTM);
+ reg |= (1 << bit);
+ __raw_writel(reg, regs + S3C64XX_UINTM);
+ __raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_uart_unmask(unsigned int irq)
+{
+ void __iomem *regs = s3c_irq_uart_base(irq);
+ unsigned int bit = s3c_irq_uart_bit(irq);
+ u32 reg;
+
+ reg = __raw_readl(regs + S3C64XX_UINTM);
+ reg &= ~(1 << bit);
+ __raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_ack(unsigned int irq)
+{
+ void __iomem *regs = s3c_irq_uart_base(irq);
+ unsigned int bit = s3c_irq_uart_bit(irq);
+
+ __raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
+{
+ struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
+ u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
+ int base = uirq->base_irq;
+
+ if (pend & (1 << 0))
+ generic_handle_irq(base);
+ if (pend & (1 << 1))
+ generic_handle_irq(base + 1);
+ if (pend & (1 << 2))
+ generic_handle_irq(base + 2);
+ if (pend & (1 << 3))
+ generic_handle_irq(base + 3);
+}
+
+static struct irq_chip s3c_irq_uart = {
+ .name = "s3c-uart",
+ .mask = s3c_irq_uart_mask,
+ .unmask = s3c_irq_uart_unmask,
+ .mask_ack = s3c_irq_uart_maskack,
+ .ack = s3c_irq_uart_ack,
+};
+
+static void __init s5pc1xx_uart_irq(struct uart_irq *uirq)
+{
+ void __iomem *reg_base = uirq->regs;
+ unsigned int irq;
+ int offs;
+
+ /* mask all interrupts at the start. */
+ __raw_writel(0xf, reg_base + S3C64XX_UINTM);
+
+ for (offs = 0; offs < 3; offs++) {
+ irq = uirq->base_irq + offs;
+
+ set_irq_chip(irq, &s3c_irq_uart);
+ set_irq_chip_data(irq, uirq);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
+}
+
+void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
+{
+ int i;
+ int uart, irq;
+
+ printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+ /* initialise the pair of VICs */
+ for (i = 0; i < num; i++)
+ vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
+ vic_valid[i], 0);
+
+ /* add the timer sub-irqs */
+
+ set_irq_chained_handler(IRQ_TIMER0, s3c_irq_demux_timer0);
+ set_irq_chained_handler(IRQ_TIMER1, s3c_irq_demux_timer1);
+ set_irq_chained_handler(IRQ_TIMER2, s3c_irq_demux_timer2);
+ set_irq_chained_handler(IRQ_TIMER3, s3c_irq_demux_timer3);
+ set_irq_chained_handler(IRQ_TIMER4, s3c_irq_demux_timer4);
+
+ for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
+ set_irq_chip(irq, &s3c_irq_timer);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
+
+ for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
+ s5pc1xx_uart_irq(&uart_irqs[uart]);
+}
+
+
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
new file mode 100644
index 0000000..6b24035
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -0,0 +1,1139 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+ *
+ * Copyright 2009 Samsung Electronics, Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 based common clock support
+ *
+ * Based on plat-s3c64xx/s3c6400-clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * ext_xtal_mux for want of an actual name from the manual.
+*/
+
+static struct clk clk_ext_xtal_mux = {
+ .name = "ext_xtal",
+ .id = -1,
+};
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
+
+#define clk_fout_mpll clk_mpll
+
+struct clk_sources {
+ unsigned int nr_sources;
+ struct clk **sources;
+};
+
+struct clksrc_clk {
+ struct clk clk;
+ unsigned int mask;
+ unsigned int shift;
+
+ struct clk_sources *sources;
+
+ unsigned int divider_shift;
+ void __iomem *reg_divider;
+ void __iomem *reg_source;
+};
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+ clk->rate = rate;
+ return 1;
+}
+
+struct clk clk_27m = {
+ .name = "clk_27m",
+ .id = -1,
+ .rate = 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+ unsigned long flags;
+ u32 val;
+
+ /* can't rely on clock lock, this register has other usages */
+ local_irq_save(flags);
+
+ val = __raw_readl(S5PC1XX_CLK_SRC1);
+ if (enable)
+ val |= S5PC100_CLKSRC1_CLK48M_MASK;
+ else
+ val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+
+ __raw_writel(val, S5PC1XX_CLK_SRC1);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+struct clk clk_48m = {
+ .name = "clk_48m",
+ .id = -1,
+ .rate = 48000000,
+ .enable = clk_48m_ctrl,
+};
+
+struct clk clk_54m = {
+ .name = "clk_54m",
+ .id = -1,
+ .rate = 54000000,
+};
+
+struct clk clk_hpll = {
+ .name = "hpll",
+ .id = -1,
+};
+
+struct clk clk_hd0 = {
+ .name = "hclkd0",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+ .set_rate = clk_default_setrate,
+};
+
+struct clk clk_pd0 = {
+ .name = "pclkd0",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+ .set_rate = clk_default_setrate,
+};
+
+static int s5pc1xx_clk_gate(void __iomem *reg,
+ struct clk *clk,
+ int enable)
+{
+ unsigned int ctrlbit = clk->ctrlbit;
+ u32 con;
+
+ con = __raw_readl(reg);
+
+ if (enable)
+ con |= ctrlbit;
+ else
+ con &= ~ctrlbit;
+
+ __raw_writel(con, reg);
+ return 0;
+}
+
+static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
+}
+
+int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+}
+
+int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable)
+{
+ return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "dsi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_DSI,
+ }, {
+ .name = "csi",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_CSI,
+ }, {
+ .name = "ccan0",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_CCAN0,
+ }, {
+ .name = "ccan1",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_CCAN1,
+ }, {
+ .name = "keypad",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
+ }, {
+ .name = "hclkd2",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc1xx_clk_d20_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D20_HCLKD2,
+ }, {
+ .name = "iis-d2",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc1xx_clk_d20_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D20_I2SD2,
+ }, {
+ .name = "otg",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_USBOTG,
+ },
+};
+
+static struct clk init_clocks[] = {
+ /* System1 (D0_0) devices */
+ {
+ .name = "intc",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_INTC,
+ }, {
+ .name = "tzic",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_TZIC,
+ }, {
+ .name = "cf-ata",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_CFCON,
+ }, {
+ .name = "mdma",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_MDMA,
+ }, {
+ .name = "g2d",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_G2D,
+ }, {
+ .name = "secss",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_SECSS,
+ }, {
+ .name = "cssys",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d00_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D00_CSSYS,
+ },
+
+ /* Memory (D0_1) devices */
+ {
+ .name = "dmc",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_DMC,
+ }, {
+ .name = "sromc",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_SROMC,
+ }, {
+ .name = "onenand",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_ONENAND,
+ }, {
+ .name = "nand",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_NFCON,
+ }, {
+ .name = "intmem",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_INTMEM,
+ }, {
+ .name = "ebi",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d01_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D01_EBI,
+ },
+
+ /* System2 (D0_2) devices */
+ {
+ .name = "seckey",
+ .id = -1,
+ .parent = &clk_pd0,
+ .enable = s5pc1xx_clk_d02_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D02_SECKEY,
+ }, {
+ .name = "sdm",
+ .id = -1,
+ .parent = &clk_hd0,
+ .enable = s5pc1xx_clk_d02_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D02_SDM,
+ },
+
+ /* File (D1_0) devices */
+ {
+ .name = "pdma0",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_PDMA0,
+ }, {
+ .name = "pdma1",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_PDMA1,
+ }, {
+ .name = "usb-host",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_USBHOST,
+ }, {
+ .name = "modem",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_MODEMIF,
+ }, {
+ .name = "hsmmc",
+ .id = 0,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_HSMMC0,
+ }, {
+ .name = "hsmmc",
+ .id = 1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_HSMMC1,
+ }, {
+ .name = "hsmmc",
+ .id = 2,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d10_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D10_HSMMC2,
+ },
+
+ /* Multimedia1 (D1_1) devices */
+ {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_LCD,
+ }, {
+ .name = "rotator",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_ROTATOR,
+ }, {
+ .name = "fimc",
+ .id = 0,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_FIMC0,
+ }, {
+ .name = "fimc",
+ .id = 1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_FIMC1,
+ }, {
+ .name = "fimc",
+ .id = 2,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_FIMC2,
+ }, {
+ .name = "jpeg",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_JPEG,
+ }, {
+ .name = "g3d",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d11_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D11_G3D,
+ },
+
+ /* Multimedia2 (D1_2) devices */
+ {
+ .name = "tv",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_TV,
+ }, {
+ .name = "vp",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_VP,
+ }, {
+ .name = "mixer",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_MIXER,
+ }, {
+ .name = "hdmi",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_HDMI,
+ }, {
+ .name = "mfc",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s5pc1xx_clk_d12_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D12_MFC,
+ },
+
+ /* System (D1_3) devices */
+ {
+ .name = "chipid",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_CHIPID,
+ }, {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_GPIO,
+ }, {
+ .name = "apc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_APC,
+ }, {
+ .name = "iec",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_IEC,
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_PWM,
+ }, {
+ .name = "systimer",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_SYSTIMER,
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_WDT,
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d13_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D13_RTC,
+ },
+
+ /* Connectivity (D1_4) devices */
+ {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART0,
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART1,
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART2,
+ }, {
+ .name = "uart",
+ .id = 3,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_UART3,
+ }, {
+ .name = "i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_IIC,
+ }, {
+ .name = "hdmi-i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_HDMI_IIC,
+ }, {
+ .name = "spi",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_SPI0,
+ }, {
+ .name = "spi",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_SPI1,
+ }, {
+ .name = "spi",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_SPI2,
+ }, {
+ .name = "irda",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_IRDA,
+ }, {
+ .name = "hsitx",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_HSITX,
+ }, {
+ .name = "hsirx",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d14_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D14_HSIRX,
+ },
+
+ /* Audio (D1_5) devices */
+ {
+ .name = "iis",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_IIS0,
+ }, {
+ .name = "iis",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_IIS1,
+ }, {
+ .name = "iis",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_IIS2,
+ }, {
+ .name = "ac97",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_AC97,
+ }, {
+ .name = "pcm",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_PCM0,
+ }, {
+ .name = "pcm",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_PCM1,
+ }, {
+ .name = "spdif",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_SPDIF,
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_TSADC,
+ }, {
+ .name = "keyif",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_KEYIF,
+ }, {
+ .name = "cg",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s5pc1xx_clk_d15_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_D15_CG,
+ },
+
+ /* Audio (D2_0) devices: all disabled */
+
+ /* Special Clocks 1 */
+ {
+ .name = "sclk_hpm",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC1XX_CLKGATE_SCLK0_HPM,
+ }, {
+ .name = "sclk_onenand",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_ONENAND,
+ }, {
+ .name = "sclk_spi_48",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI0_48,
+ }, {
+ .name = "sclk_spi_48",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI1_48,
+ }, {
+ .name = "sclk_spi_48",
+ .id = 2,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_SPI2_48,
+ }, {
+ .name = "sclk_mmc_48",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC0_48,
+ }, {
+ .name = "sclk_mmc_48",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC1_48,
+ }, {
+ .name = "sclk_mmc_48",
+ .id = 2,
+ .parent = &clk_48m,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_MMC2_48,
+ },
+
+ /* Special Clocks 2 */
+ {
+ .name = "sclk_tv_54",
+ .id = -1,
+ .parent = &clk_54m,
+ .enable = s5pc1xx_sclk1_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_TV54,
+ }, {
+ .name = "sclk_vdac_54",
+ .id = -1,
+ .parent = &clk_54m,
+ .enable = s5pc1xx_sclk1_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_VDAC54,
+ }, {
+ .name = "sclk_spdif",
+ .id = -1,
+ .parent = NULL,
+ .enable = s5pc1xx_sclk1_ctrl,
+ .ctrlbit = S5PC100_CLKGATE_SCLK1_SPDIF,
+ },
+};
+
+void __init s5pc1xx_register_clocks(void)
+{
+ struct clk *clkp;
+ int ret;
+ int ptr;
+
+ clkp = init_clocks;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
+
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+
+ (clkp->enable)(clkp, 0);
+ }
+
+ s3c_pwmclk_init();
+}
+static struct clk clk_fout_apll = {
+ .name = "fout_apll",
+ .id = -1,
+};
+
+static struct clk *clk_src_apll_list[] = {
+ [0] = &clk_fin_apll,
+ [1] = &clk_fout_apll,
+};
+
+static struct clk_sources clk_src_apll = {
+ .sources = clk_src_apll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_apll_list),
+};
+
+static struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ .id = -1,
+ },
+ .shift = S5PC1XX_CLKSRC0_APLL_SHIFT,
+ .mask = S5PC1XX_CLKSRC0_APLL_MASK,
+ .sources = &clk_src_apll,
+ .reg_source = S5PC1XX_CLK_SRC0,
+};
+
+static struct clk clk_fout_epll = {
+ .name = "fout_epll",
+ .id = -1,
+};
+
+static struct clk *clk_src_epll_list[] = {
+ [0] = &clk_fin_epll,
+ [1] = &clk_fout_epll,
+};
+
+static struct clk_sources clk_src_epll = {
+ .sources = clk_src_epll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_epll_list),
+};
+
+static struct clksrc_clk clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ .id = -1,
+ },
+ .shift = S5PC1XX_CLKSRC0_EPLL_SHIFT,
+ .mask = S5PC1XX_CLKSRC0_EPLL_MASK,
+ .sources = &clk_src_epll,
+ .reg_source = S5PC1XX_CLK_SRC0,
+};
+
+static struct clk *clk_src_mpll_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &clk_fout_mpll,
+};
+
+static struct clk_sources clk_src_mpll = {
+ .sources = clk_src_mpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ .id = -1,
+ },
+ .shift = S5PC1XX_CLKSRC0_MPLL_SHIFT,
+ .mask = S5PC1XX_CLKSRC0_MPLL_MASK,
+ .sources = &clk_src_mpll,
+ .reg_source = S5PC1XX_CLK_SRC0,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned long clkdiv;
+
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+ clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK;
+ rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1;
+
+ return rate;
+}
+
+static struct clk clk_dout_mpll = {
+ .name = "dout_mpll",
+ .id = -1,
+ .parent = &clk_mout_mpll.clk,
+ .get_rate = s5pc1xx_clk_doutmpll_get_rate,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ unsigned long clkdiv;
+
+ printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+ clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
+ rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1;
+
+ return rate;
+}
+
+struct clk clk_dout_mpll2 = {
+ .name = "dout_mpll2",
+ .id = -1,
+ .parent = &clk_mout_mpll.clk,
+ .get_rate = s5pc1xx_clk_doutmpll2_get_rate,
+};
+
+static struct clk *clkset_uart_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll,
+ NULL,
+ NULL
+};
+
+static struct clk_sources clkset_uart = {
+ .sources = clkset_uart_list,
+ .nr_sources = ARRAY_SIZE(clkset_uart_list),
+};
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+ return container_of(clk, struct clksrc_clk, clk);
+}
+
+static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
+{
+ struct clksrc_clk *sclk = to_clksrc(clk);
+ unsigned long rate = clk_get_rate(clk->parent);
+ u32 clkdiv = __raw_readl(sclk->reg_divider);
+
+ clkdiv >>= sclk->divider_shift;
+ clkdiv &= 0xf;
+ clkdiv++;
+
+ rate /= clkdiv;
+ return rate;
+}
+
+static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+ struct clksrc_clk *sclk = to_clksrc(clk);
+ void __iomem *reg = sclk->reg_divider;
+ unsigned int div;
+ u32 val;
+
+ rate = clk_round_rate(clk, rate);
+ div = clk_get_rate(clk->parent) / rate;
+ if (div > 16)
+ return -EINVAL;
+
+ val = __raw_readl(reg);
+ val &= ~(0xf << sclk->shift);
+ val |= (div - 1) << sclk->shift;
+ __raw_writel(val, reg);
+
+ return 0;
+}
+
+static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+ struct clksrc_clk *sclk = to_clksrc(clk);
+ struct clk_sources *srcs = sclk->sources;
+ u32 clksrc = __raw_readl(sclk->reg_source);
+ int src_nr = -1;
+ int ptr;
+
+ for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+ if (srcs->sources[ptr] == parent) {
+ src_nr = ptr;
+ break;
+ }
+
+ if (src_nr >= 0) {
+ clksrc &= ~sclk->mask;
+ clksrc |= src_nr << sclk->shift;
+
+ __raw_writel(clksrc, sclk->reg_source);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ int div;
+
+ if (rate > parent_rate)
+ rate = parent_rate;
+ else {
+ div = rate / parent_rate;
+
+ if (div == 0)
+ div = 1;
+ if (div > 16)
+ div = 16;
+
+ rate = parent_rate / div;
+ }
+
+ return rate;
+}
+
+static struct clksrc_clk clk_uart_uclk1 = {
+ .clk = {
+ .name = "uclk1",
+ .id = -1,
+ .ctrlbit = S5PC100_CLKGATE_SCLK0_UART,
+ .enable = s5pc1xx_sclk0_ctrl,
+ .set_parent = s5pc1xx_setparent_clksrc,
+ .get_rate = s5pc1xx_getrate_clksrc,
+ .set_rate = s5pc1xx_setrate_clksrc,
+ .round_rate = s5pc1xx_roundrate_clksrc,
+ },
+ .shift = S5PC100_CLKSRC1_UART_SHIFT,
+ .mask = S5PC100_CLKSRC1_UART_MASK,
+ .sources = &clkset_uart,
+ .divider_shift = S5PC100_CLKDIV2_UART_SHIFT,
+ .reg_divider = S5PC1XX_CLK_DIV2,
+ .reg_source = S5PC1XX_CLK_SRC1,
+};
+
+/* Clock initialisation code */
+
+static struct clksrc_clk *init_parents[] = {
+ &clk_mout_apll,
+ &clk_mout_epll,
+ &clk_mout_mpll,
+ &clk_uart_uclk1,
+};
+
+static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
+{
+ struct clk_sources *srcs = clk->sources;
+ u32 clksrc = __raw_readl(clk->reg_source);
+
+ clksrc &= clk->mask;
+ clksrc >>= clk->shift;
+
+ if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+ printk(KERN_ERR "%s: bad source %d\n",
+ clk->clk.name, clksrc);
+ return;
+ }
+
+ clk->clk.parent = srcs->sources[clksrc];
+
+ printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+ clk->clk.name, clk->clk.parent->name, clksrc,
+ clk_get_rate(&clk->clk));
+}
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s5pc100_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+ unsigned long armclk;
+ unsigned long hclkd0;
+ unsigned long hclk;
+ unsigned long pclkd0;
+ unsigned long pclk;
+ unsigned long apll;
+ unsigned long mpll;
+ unsigned long hpll;
+ unsigned long epll;
+ unsigned int ptr;
+ u32 clkdiv0, clkdiv1;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0);
+ clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1);
+
+ printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
+ __func__, clkdiv0, clkdiv1);
+
+ xtal_clk = clk_get(NULL, "xtal");
+ BUG_ON(IS_ERR(xtal_clk));
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON));
+ mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON));
+ epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON));
+ hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
+
+ printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n",
+ apll, mpll, epll, hpll);
+
+ armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL);
+ armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
+ hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
+ pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
+ hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
+ pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
+
+ printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n",
+ armclk, hclkd0, pclkd0, hclk, pclk);
+
+ clk_fout_apll.rate = apll;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_fout_apll.rate = apll;
+
+ clk_h.rate = hclk;
+ clk_p.rate = pclk;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+ s5pc1xx_set_clksrc(init_parents[ptr]);
+}
+
+static struct clk *clks[] __initdata = {
+ &clk_ext_xtal_mux,
+ &clk_mout_epll.clk,
+ &clk_fout_epll,
+ &clk_mout_mpll.clk,
+ &clk_dout_mpll,
+ &clk_uart_uclk1.clk,
+ &clk_ext,
+ &clk_epll,
+ &clk_27m,
+ &clk_48m,
+ &clk_54m,
+};
+
+void __init s5pc100_register_clocks(void)
+{
+ struct clk *clkp;
+ int ret;
+ int ptr;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+ clkp = clks[ptr];
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
+
+ clk_mpll.parent = &clk_mout_mpll.clk;
+ clk_epll.parent = &clk_mout_epll.clk;
+}
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-init.c b/arch/arm/plat-s5pc1xx/s5pc100-init.c
new file mode 100644
index 0000000..c587108
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-init.c
@@ -0,0 +1,27 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - CPU initialisation (common with other S5PC1XX chips)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* uart registration process */
+
+void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ /* The driver name is s3c6400-uart to reuse s3c6400_serial_drv */
+ s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no);
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
new file mode 100644
index 0000000..3d00c02
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-i2c0.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 0 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ /* Pin configuration would be needed */
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
new file mode 100644
index 0000000..c8f3ca4
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 1 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c1.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+ /* Pin configuration would be needed */
+}