diff options
Diffstat (limited to 'arch/powerpc/mm/slb_low.S')
| -rw-r--r-- | arch/powerpc/mm/slb_low.S | 220 |
1 files changed, 152 insertions, 68 deletions
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S index a3a03da..3e18241 100644 --- a/arch/powerpc/mm/slb_low.S +++ b/arch/powerpc/mm/slb_low.S @@ -18,61 +18,28 @@ #include <linux/config.h> #include <asm/processor.h> -#include <asm/page.h> -#include <asm/mmu.h> #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> #include <asm/cputable.h> +#include <asm/page.h> +#include <asm/mmu.h> +#include <asm/pgtable.h> -/* void slb_allocate(unsigned long ea); +/* void slb_allocate_realmode(unsigned long ea); * * Create an SLB entry for the given EA (user or kernel). * r3 = faulting address, r13 = PACA * r9, r10, r11 are clobbered by this function * No other registers are examined or changed. */ -_GLOBAL(slb_allocate) - /* - * First find a slot, round robin. Previously we tried to find - * a free slot first but that took too long. Unfortunately we - * dont have any LRU information to help us choose a slot. - */ -#ifdef CONFIG_PPC_ISERIES - /* - * On iSeries, the "bolted" stack segment can be cast out on - * shared processor switch so we need to check for a miss on - * it and restore it to the right slot. - */ - ld r9,PACAKSAVE(r13) - clrrdi r9,r9,28 - clrrdi r11,r3,28 - li r10,SLB_NUM_BOLTED-1 /* Stack goes in last bolted slot */ - cmpld r9,r11 - beq 3f -#endif /* CONFIG_PPC_ISERIES */ - - ld r10,PACASTABRR(r13) - addi r10,r10,1 - /* use a cpu feature mask if we ever change our slb size */ - cmpldi r10,SLB_NUM_ENTRIES - - blt+ 4f - li r10,SLB_NUM_BOLTED - -4: - std r10,PACASTABRR(r13) -3: - /* r3 = faulting address, r10 = entry */ +_GLOBAL(slb_allocate_realmode) + /* r3 = faulting address */ srdi r9,r3,60 /* get region */ - srdi r3,r3,28 /* get esid */ + srdi r10,r3,28 /* get esid */ cmpldi cr7,r9,0xc /* cmp KERNELBASE for later use */ - rldimi r10,r3,28,0 /* r10= ESID<<28 | entry */ - oris r10,r10,SLB_ESID_V@h /* r10 |= SLB_ESID_V */ - - /* r3 = esid, r10 = esid_data, cr7 = <>KERNELBASE */ - + /* r3 = address, r10 = esid, cr7 = <>KERNELBASE */ blt cr7,0f /* user or kernel? */ /* kernel address: proto-VSID = ESID */ @@ -81,43 +48,161 @@ _GLOBAL(slb_allocate) * top segment. That's ok, the scramble below will translate * it to VSID 0, which is reserved as a bad VSID - one which * will never have any pages in it. */ - li r11,SLB_VSID_KERNEL -BEGIN_FTR_SECTION - bne cr7,9f - li r11,(SLB_VSID_KERNEL|SLB_VSID_L) -END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE) - b 9f -0: /* user address: proto-VSID = context<<15 | ESID */ - srdi. r9,r3,USER_ESID_BITS + /* Check if hitting the linear mapping of the vmalloc/ioremap + * kernel space + */ + bne cr7,1f + + /* Linear mapping encoding bits, the "li" instruction below will + * be patched by the kernel at boot + */ +_GLOBAL(slb_miss_kernel_load_linear) + li r11,0 + b slb_finish_load + +1: /* vmalloc/ioremap mapping encoding bits, the "li" instruction below + * will be patched by the kernel at boot + */ +_GLOBAL(slb_miss_kernel_load_virtual) + li r11,0 + b slb_finish_load + + +0: /* user address: proto-VSID = context << 15 | ESID. First check + * if the address is within the boundaries of the user region + */ + srdi. r9,r10,USER_ESID_BITS bne- 8f /* invalid ea bits set */ + /* Figure out if the segment contains huge pages */ #ifdef CONFIG_HUGETLB_PAGE BEGIN_FTR_SECTION + b 1f +END_FTR_SECTION_IFCLR(CPU_FTR_16M_PAGE) lhz r9,PACAHIGHHTLBAREAS(r13) - srdi r11,r3,(HTLB_AREA_SHIFT-SID_SHIFT) + srdi r11,r10,(HTLB_AREA_SHIFT-SID_SHIFT) srd r9,r9,r11 lhz r11,PACALOWHTLBAREAS(r13) - srd r11,r11,r3 - or r9,r9,r11 -END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE) + srd r11,r11,r10 + or. r9,r9,r11 + beq 1f +_GLOBAL(slb_miss_user_load_huge) + li r11,0 + b 2f +1: #endif /* CONFIG_HUGETLB_PAGE */ - li r11,SLB_VSID_USER +_GLOBAL(slb_miss_user_load_normal) + li r11,0 -#ifdef CONFIG_HUGETLB_PAGE -BEGIN_FTR_SECTION - rldimi r11,r9,8,55 /* shift masked bit into SLB_VSID_L */ -END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE) -#endif /* CONFIG_HUGETLB_PAGE */ +2: + ld r9,PACACONTEXTID(r13) + rldimi r10,r9,USER_ESID_BITS,0 + b slb_finish_load + +8: /* invalid EA */ + li r10,0 /* BAD_VSID */ + li r11,SLB_VSID_USER /* flags don't much matter */ + b slb_finish_load + +#ifdef __DISABLED__ + +/* void slb_allocate_user(unsigned long ea); + * + * Create an SLB entry for the given EA (user or kernel). + * r3 = faulting address, r13 = PACA + * r9, r10, r11 are clobbered by this function + * No other registers are examined or changed. + * + * It is called with translation enabled in order to be able to walk the + * page tables. This is not currently used. + */ +_GLOBAL(slb_allocate_user) + /* r3 = faulting address */ + srdi r10,r3,28 /* get esid */ + + crset 4*cr7+lt /* set "user" flag for later */ + + /* check if we fit in the range covered by the pagetables*/ + srdi. r9,r3,PGTABLE_EADDR_SIZE + crnot 4*cr0+eq,4*cr0+eq + beqlr + /* now we need to get to the page tables in order to get the page + * size encoding from the PMD. In the future, we'll be able to deal + * with 1T segments too by getting the encoding from the PGD instead + */ + ld r9,PACAPGDIR(r13) + cmpldi cr0,r9,0 + beqlr + rlwinm r11,r10,8,25,28 + ldx r9,r9,r11 /* get pgd_t */ + cmpldi cr0,r9,0 + beqlr + rlwinm r11,r10,3,17,28 + ldx r9,r9,r11 /* get pmd_t */ + cmpldi cr0,r9,0 + beqlr + + /* build vsid flags */ + andi. r11,r9,SLB_VSID_LLP + ori r11,r11,SLB_VSID_USER + + /* get context to calculate proto-VSID */ ld r9,PACACONTEXTID(r13) - rldimi r3,r9,USER_ESID_BITS,0 + rldimi r10,r9,USER_ESID_BITS,0 + + /* fall through slb_finish_load */ + +#endif /* __DISABLED__ */ -9: /* r3 = protovsid, r11 = flags, r10 = esid_data, cr7 = <>KERNELBASE */ - ASM_VSID_SCRAMBLE(r3,r9) - rldimi r11,r3,SLB_VSID_SHIFT,16 /* combine VSID and flags */ +/* + * Finish loading of an SLB entry and return + * + * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <>KERNELBASE + */ +slb_finish_load: + ASM_VSID_SCRAMBLE(r10,r9) + rldimi r11,r10,SLB_VSID_SHIFT,16 /* combine VSID and flags */ + + /* r3 = EA, r11 = VSID data */ + /* + * Find a slot, round robin. Previously we tried to find a + * free slot first but that took too long. Unfortunately we + * dont have any LRU information to help us choose a slot. + */ +#ifdef CONFIG_PPC_ISERIES + /* + * On iSeries, the "bolted" stack segment can be cast out on + * shared processor switch so we need to check for a miss on + * it and restore it to the right slot. + */ + ld r9,PACAKSAVE(r13) + clrrdi r9,r9,28 + clrrdi r3,r3,28 + li r10,SLB_NUM_BOLTED-1 /* Stack goes in last bolted slot */ + cmpld r9,r3 + beq 3f +#endif /* CONFIG_PPC_ISERIES */ + + ld r10,PACASTABRR(r13) + addi r10,r10,1 + /* use a cpu feature mask if we ever change our slb size */ + cmpldi r10,SLB_NUM_ENTRIES + + blt+ 4f + li r10,SLB_NUM_BOLTED + +4: + std r10,PACASTABRR(r13) + +3: + rldimi r3,r10,0,36 /* r3= EA[0:35] | entry */ + oris r10,r3,SLB_ESID_V@h /* r3 |= SLB_ESID_V */ + + /* r3 = ESID data, r11 = VSID data */ /* * No need for an isync before or after this slbmte. The exception @@ -125,7 +210,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE) */ slbmte r11,r10 - bgelr cr7 /* we're done for kernel addresses */ + /* we're done for kernel addresses */ + crclr 4*cr0+eq /* set result to "success" */ + bgelr cr7 /* Update the slb cache */ lhz r3,PACASLBCACHEPTR(r13) /* offset = paca->slb_cache_ptr */ @@ -143,9 +230,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_16M_PAGE) li r3,SLB_CACHE_ENTRIES+1 2: sth r3,PACASLBCACHEPTR(r13) /* paca->slb_cache_ptr = offset */ + crclr 4*cr0+eq /* set result to "success" */ blr -8: /* invalid EA */ - li r3,0 /* BAD_VSID */ - li r11,SLB_VSID_USER /* flags don't much matter */ - b 9b |