diff options
Diffstat (limited to 'arch/powerpc/platforms/52xx')
| -rw-r--r-- | arch/powerpc/platforms/52xx/Makefile | 1 | ||||
| -rw-r--r-- | arch/powerpc/platforms/52xx/lite5200.c | 6 | ||||
| -rw-r--r-- | arch/powerpc/platforms/52xx/mpc52xx_pci.c | 412 |
3 files changed, 419 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index a46184a..795b713 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -3,6 +3,7 @@ # ifeq ($(CONFIG_PPC_MERGE),y) obj-y += mpc52xx_pic.o mpc52xx_common.o +obj-$(CONFIG_PCI) += mpc52xx_pci.o endif obj-$(CONFIG_PPC_EFIKA) += efika-setup.o efika-pci.o diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c index 0f21bab..cdb16bf 100644 --- a/arch/powerpc/platforms/52xx/lite5200.c +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -107,6 +107,12 @@ static void __init lite52xx_setup_arch(void) mpc52xx_setup_cpu(); /* Generic */ lite52xx_setup_cpu(); /* Platorm specific */ +#ifdef CONFIG_PCI + np = of_find_node_by_type(np, "pci"); + if (np) + mpc52xx_add_bridge(np); +#endif + #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) ROOT_DEV = Root_RAM0; diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c new file mode 100644 index 0000000..faf161b --- /dev/null +++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c @@ -0,0 +1,412 @@ +/* + * PCI code for the Freescale MPC52xx embedded CPU. + * + * Copyright (C) 2006 Secret Lab Technologies Ltd. + * Grant Likely <grant.likely@secretlab.ca> + * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#undef DEBUG + +#include <asm/pci.h> +#include <asm/mpc52xx.h> +#include <asm/delay.h> +#include <asm/machdep.h> +#include <linux/kernel.h> + + +/* ======================================================================== */ +/* PCI windows config */ +/* ======================================================================== */ + +#define MPC52xx_PCI_TARGET_IO 0xf0000000 +#define MPC52xx_PCI_TARGET_MEM 0x00000000 + + +/* ======================================================================== */ +/* Structures mapping & Defines for PCI Unit */ +/* ======================================================================== */ + +#define MPC52xx_PCI_GSCR_BM 0x40000000 +#define MPC52xx_PCI_GSCR_PE 0x20000000 +#define MPC52xx_PCI_GSCR_SE 0x10000000 +#define MPC52xx_PCI_GSCR_XLB2PCI_MASK 0x07000000 +#define MPC52xx_PCI_GSCR_XLB2PCI_SHIFT 24 +#define MPC52xx_PCI_GSCR_IPG2PCI_MASK 0x00070000 +#define MPC52xx_PCI_GSCR_IPG2PCI_SHIFT 16 +#define MPC52xx_PCI_GSCR_BME 0x00004000 +#define MPC52xx_PCI_GSCR_PEE 0x00002000 +#define MPC52xx_PCI_GSCR_SEE 0x00001000 +#define MPC52xx_PCI_GSCR_PR 0x00000001 + + +#define MPC52xx_PCI_IWBTAR_TRANSLATION(proc_ad,pci_ad,size) \ + ( ( (proc_ad) & 0xff000000 ) | \ + ( (((size) - 1) >> 8) & 0x00ff0000 ) | \ + ( ((pci_ad) >> 16) & 0x0000ff00 ) ) + +#define MPC52xx_PCI_IWCR_PACK(win0,win1,win2) (((win0) << 24) | \ + ((win1) << 16) | \ + ((win2) << 8)) + +#define MPC52xx_PCI_IWCR_DISABLE 0x0 +#define MPC52xx_PCI_IWCR_ENABLE 0x1 +#define MPC52xx_PCI_IWCR_READ 0x0 +#define MPC52xx_PCI_IWCR_READ_LINE 0x2 +#define MPC52xx_PCI_IWCR_READ_MULTI 0x4 +#define MPC52xx_PCI_IWCR_MEM 0x0 +#define MPC52xx_PCI_IWCR_IO 0x8 + +#define MPC52xx_PCI_TCR_P 0x01000000 +#define MPC52xx_PCI_TCR_LD 0x00010000 + +#define MPC52xx_PCI_TBATR_DISABLE 0x0 +#define MPC52xx_PCI_TBATR_ENABLE 0x1 + +struct mpc52xx_pci { + u32 idr; /* PCI + 0x00 */ + u32 scr; /* PCI + 0x04 */ + u32 ccrir; /* PCI + 0x08 */ + u32 cr1; /* PCI + 0x0C */ + u32 bar0; /* PCI + 0x10 */ + u32 bar1; /* PCI + 0x14 */ + u8 reserved1[16]; /* PCI + 0x18 */ + u32 ccpr; /* PCI + 0x28 */ + u32 sid; /* PCI + 0x2C */ + u32 erbar; /* PCI + 0x30 */ + u32 cpr; /* PCI + 0x34 */ + u8 reserved2[4]; /* PCI + 0x38 */ + u32 cr2; /* PCI + 0x3C */ + u8 reserved3[32]; /* PCI + 0x40 */ + u32 gscr; /* PCI + 0x60 */ + u32 tbatr0; /* PCI + 0x64 */ + u32 tbatr1; /* PCI + 0x68 */ + u32 tcr; /* PCI + 0x6C */ + u32 iw0btar; /* PCI + 0x70 */ + u32 iw1btar; /* PCI + 0x74 */ + u32 iw2btar; /* PCI + 0x78 */ + u8 reserved4[4]; /* PCI + 0x7C */ + u32 iwcr; /* PCI + 0x80 */ + u32 icr; /* PCI + 0x84 */ + u32 isr; /* PCI + 0x88 */ + u32 arb; /* PCI + 0x8C */ + u8 reserved5[104]; /* PCI + 0x90 */ + u32 car; /* PCI + 0xF8 */ + u8 reserved6[4]; /* PCI + 0xFC */ +}; + + +/* ======================================================================== */ +/* PCI configuration acess */ +/* ======================================================================== */ + +static int +mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose = bus->sysdata; + u32 value; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + out_be32(hose->cfg_addr, + (1 << 31) | + ((bus->number - hose->bus_offset) << 16) | + (devfn << 8) | + (offset & 0xfc)); + mb(); + +#if defined(CONFIG_PPC_MPC5200_BUGFIX) + if (bus->number != hose->bus_offset) { + /* workaround for the bug 435 of the MPC5200 (L25R); + * Don't do 32 bits config access during type-1 cycles */ + switch (len) { + case 1: + value = in_8(((u8 __iomem *)hose->cfg_data) + + (offset & 3)); + break; + case 2: + value = in_le16(((u16 __iomem *)hose->cfg_data) + + ((offset>>1) & 1)); + break; + + default: + value = in_le16((u16 __iomem *)hose->cfg_data) | + (in_le16(((u16 __iomem *)hose->cfg_data) + 1) << 16); + break; + } + } + else +#endif + { + value = in_le32(hose->cfg_data); + + if (len != 4) { + value >>= ((offset & 0x3) << 3); + value &= 0xffffffff >> (32 - (len << 3)); + } + } + + *val = value; + + out_be32(hose->cfg_addr, 0); + mb(); + + return PCIBIOS_SUCCESSFUL; +} + +static int +mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + u32 value, mask; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + out_be32(hose->cfg_addr, + (1 << 31) | + ((bus->number - hose->bus_offset) << 16) | + (devfn << 8) | + (offset & 0xfc)); + mb(); + +#if defined(CONFIG_PPC_MPC5200_BUGFIX) + if (bus->number != hose->bus_offset) { + /* workaround for the bug 435 of the MPC5200 (L25R); + * Don't do 32 bits config access during type-1 cycles */ + switch (len) { + case 1: + out_8(((u8 __iomem *)hose->cfg_data) + + (offset & 3), val); + break; + case 2: + out_le16(((u16 __iomem *)hose->cfg_data) + + ((offset>>1) & 1), val); + break; + + default: + out_le16((u16 __iomem *)hose->cfg_data, + (u16)val); + out_le16(((u16 __iomem *)hose->cfg_data) + 1, + (u16)(val>>16)); + break; + } + } + else +#endif + { + if (len != 4) { + value = in_le32(hose->cfg_data); + + offset = (offset & 0x3) << 3; + mask = (0xffffffff >> (32 - (len << 3))); + mask <<= offset; + + value &= ~mask; + val = value | ((val << offset) & mask); + } + + out_le32(hose->cfg_data, val); + } + mb(); + + out_be32(hose->cfg_addr, 0); + mb(); + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops mpc52xx_pci_ops = { + .read = mpc52xx_pci_read_config, + .write = mpc52xx_pci_write_config +}; + + +/* ======================================================================== */ +/* PCI setup */ +/* ======================================================================== */ + +static void __init +mpc52xx_pci_setup(struct pci_controller *hose, + struct mpc52xx_pci __iomem *pci_regs) +{ + struct resource *res; + u32 tmp; + int iwcr0 = 0, iwcr1 = 0, iwcr2 = 0; + + pr_debug("mpc52xx_pci_setup(hose=%p, pci_regs=%p)\n", hose, pci_regs); + + /* pci_process_bridge_OF_ranges() found all our addresses for us; + * now store them in the right places */ + hose->cfg_addr = &pci_regs->car; + hose->cfg_data = hose->io_base_virt; + + /* Control regs */ + tmp = in_be32(&pci_regs->scr); + tmp |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + out_be32(&pci_regs->scr, tmp); + + /* Memory windows */ + res = &hose->mem_resources[0]; + if (res->flags) { + pr_debug("mem_resource[0] = {.start=%x, .end=%x, .flags=%lx}\n", + res->start, res->end, res->flags); + out_be32(&pci_regs->iw0btar, + MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start, + res->end - res->start + 1)); + iwcr0 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_MEM; + if (res->flags & IORESOURCE_PREFETCH) + iwcr0 |= MPC52xx_PCI_IWCR_READ_MULTI; + else + iwcr0 |= MPC52xx_PCI_IWCR_READ; + } + + res = &hose->mem_resources[1]; + if (res->flags) { + pr_debug("mem_resource[1] = {.start=%x, .end=%x, .flags=%lx}\n", + res->start, res->end, res->flags); + out_be32(&pci_regs->iw1btar, + MPC52xx_PCI_IWBTAR_TRANSLATION(res->start, res->start, + res->end - res->start + 1)); + iwcr1 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_MEM; + if (res->flags & IORESOURCE_PREFETCH) + iwcr1 |= MPC52xx_PCI_IWCR_READ_MULTI; + else + iwcr1 |= MPC52xx_PCI_IWCR_READ; + } + + /* IO resources */ + res = &hose->io_resource; + if (!res) { + printk(KERN_ERR "%s: Didn't find IO resources\n", __FILE__); + return; + } + pr_debug(".io_resource={.start=%x,.end=%x,.flags=%lx} " + ".io_base_phys=0x%p\n", + res->start, res->end, res->flags, (void*)hose->io_base_phys); + out_be32(&pci_regs->iw2btar, + MPC52xx_PCI_IWBTAR_TRANSLATION(hose->io_base_phys, + res->start, + res->end - res->start + 1)); + iwcr2 = MPC52xx_PCI_IWCR_ENABLE | MPC52xx_PCI_IWCR_IO; + + /* Set all the IWCR fields at once; they're in the same reg */ + out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(iwcr0, iwcr1, iwcr2)); + + out_be32(&pci_regs->tbatr0, + MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO ); + out_be32(&pci_regs->tbatr1, + MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM ); + + out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD); + + tmp = in_be32(&pci_regs->gscr); +#if 0 + /* Reset the exteral bus ( internal PCI controller is NOT resetted ) */ + /* Not necessary and can be a bad thing if for example the bootloader + is displaying a splash screen or ... Just left here for + documentation purpose if anyone need it */ + out_be32(&pci_regs->gscr, tmp | MPC52xx_PCI_GSCR_PR); + udelay(50); +#endif + + /* Make sure the PCI bridge is out of reset */ + out_be32(&pci_regs->gscr, tmp & ~MPC52xx_PCI_GSCR_PR); +} + +static void +mpc52xx_pci_fixup_resources(struct pci_dev *dev) +{ + int i; + + pr_debug("mpc52xx_pci_fixup_resources() %.4x:%.4x\n", + dev->vendor, dev->device); + + /* We don't rely on boot loader for PCI and resets all + devices */ + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + struct resource *res = &dev->resource[i]; + if (res->end > res->start) { /* Only valid resources */ + res->end -= res->start; + res->start = 0; + res->flags |= IORESOURCE_UNSET; + } + } + + /* The PCI Host bridge of MPC52xx has a prefetch memory resource + fixed to 1Gb. Doesn't fit in the resource system so we remove it */ + if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) && + ( dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200 + || dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200B) ) { + struct resource *res = &dev->resource[1]; + res->start = res->end = res->flags = 0; + } +} + +int __init +mpc52xx_add_bridge(struct device_node *node) +{ + int len; + struct mpc52xx_pci __iomem *pci_regs; + struct pci_controller *hose; + const int *bus_range; + struct resource rsrc; + + pr_debug("Adding MPC52xx PCI host bridge %s\n", node->full_name); + + pci_assign_all_buses = 1; + + if (of_address_to_resource(node, 0, &rsrc) != 0) { + printk(KERN_ERR "Can't get %s resources\n", node->full_name); + return -EINVAL; + } + + bus_range = get_property(node, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get %s bus-range, assume bus 0\n", + node->full_name); + bus_range = NULL; + } + + /* There are some PCI quirks on the 52xx, register the hook to + * fix them. */ + ppc_md.pcibios_fixup_resources = mpc52xx_pci_fixup_resources; + + /* Alloc and initialize the pci controller. Values in the device + * tree are needed to configure the 52xx PCI controller. Rather + * than parse the tree here, let pci_process_bridge_OF_ranges() + * do it for us and extract the values after the fact */ + hose = pcibios_alloc_controller(); + if (!hose) + return -ENOMEM; + + hose->arch_data = node; + hose->set_cfg_type = 1; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + hose->bus_offset = 0; + hose->ops = &mpc52xx_pci_ops; + + pci_regs = ioremap(rsrc.start, rsrc.end - rsrc.start + 1); + if (!pci_regs) + return -ENOMEM; + + pci_process_bridge_OF_ranges(hose, node, 1); + + /* Finish setting up PCI using values obtained by + * pci_proces_bridge_OF_ranges */ + mpc52xx_pci_setup(hose, pci_regs); + + return 0; +} |