1 files changed, 244 insertions, 0 deletions
diff --git a/arch/x86/include/asm/io_64.h b/arch/x86/include/asm/io_64.h
new file mode 100644
index 0000000..ee6e086
--- /dev/null
+++ b/arch/x86/include/asm/io_64.h
@@ -0,0 +1,244 @@
+#ifndef ASM_X86__IO_64_H
+#define ASM_X86__IO_64_H
+
+
+/*
+ * This file contains the definitions for the x86 IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated
+ * to (a) handle it all in a way that makes gcc able to optimize it
+ * as well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ */
+
+/*
+ * Thanks to James van Artsdalen for a better timing-fix than
+ * the two short jumps: using outb's to a nonexistent port seems
+ * to guarantee better timings even on fast machines.
+ *
+ * On the other hand, I'd like to be sure of a non-existent port:
+ * I feel a bit unsafe about using 0x80 (should be safe, though)
+ *
+ *		Linus
+ */
+
+ /*
+  *  Bit simplified and optimized by Jan Hubicka
+  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
+  *
+  *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
+  *  isa_read[wl] and isa_write[wl] fixed
+  *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+  */
+
+extern void native_io_delay(void);
+
+extern int io_delay_type;
+extern void io_delay_init(void);
+
+#if defined(CONFIG_PARAVIRT)
+#include <asm/paravirt.h>
+#else
+
+static inline void slow_down_io(void)
+{
+	native_io_delay();
+#ifdef REALLY_SLOW_IO
+	native_io_delay();
+	native_io_delay();
+	native_io_delay();
+#endif
+}
+#endif
+
+/*
+ * Talk about misusing macros..
+ */
+#define __OUT1(s, x)							\
+static inline void out##s(unsigned x value, unsigned short port) {
+
+#define __OUT2(s, s1, s2)				\
+asm volatile ("out" #s " %" s1 "0,%" s2 "1"
+
+#ifndef REALLY_SLOW_IO
+#define REALLY_SLOW_IO
+#define UNSET_REALLY_SLOW_IO
+#endif
+
+#define __OUT(s, s1, x)							\
+	__OUT1(s, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port));	\
+	}								\
+	__OUT1(s##_p, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \
+	slow_down_io();							\
+}
+
+#define __IN1(s)							\
+static inline RETURN_TYPE in##s(unsigned short port)			\
+{									\
+	RETURN_TYPE _v;
+
+#define __IN2(s, s1, s2)						\
+	asm volatile ("in" #s " %" s2 "1,%" s1 "0"
+
+#define __IN(s, s1, i...)						\
+	__IN1(s) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i);	\
+	return _v;							\
+	}								\
+	__IN1(s##_p) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i);	\
+	slow_down_io(); \
+	return _v; }
+
+#ifdef UNSET_REALLY_SLOW_IO
+#undef REALLY_SLOW_IO
+#endif
+
+#define __INS(s)							\
+static inline void ins##s(unsigned short port, void *addr,		\
+			  unsigned long count)				\
+{									\
+	asm volatile ("rep ; ins" #s					\
+		      : "=D" (addr), "=c" (count)			\
+		      : "d" (port), "0" (addr), "1" (count));		\
+}
+
+#define __OUTS(s)							\
+static inline void outs##s(unsigned short port, const void *addr,	\
+			   unsigned long count)				\
+{									\
+	asm volatile ("rep ; outs" #s					\
+		      : "=S" (addr), "=c" (count)			\
+		      : "d" (port), "0" (addr), "1" (count));		\
+}
+
+#define RETURN_TYPE unsigned char
+__IN(b, "")
+#undef RETURN_TYPE
+#define RETURN_TYPE unsigned short
+__IN(w, "")
+#undef RETURN_TYPE
+#define RETURN_TYPE unsigned int
+__IN(l, "")
+#undef RETURN_TYPE
+
+__OUT(b, "b", char)
+__OUT(w, "w", short)
+__OUT(l, , int)
+
+__INS(b)
+__INS(w)
+__INS(l)
+
+__OUTS(b)
+__OUTS(w)
+__OUTS(l)
+
+#define IO_SPACE_LIMIT 0xffff
+
+#if defined(__KERNEL__) && defined(__x86_64__)
+
+#include <linux/vmalloc.h>
+
+#ifndef __i386__
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+	return __pa(address);
+}
+
+static inline void *phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+#endif
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+#include <asm-generic/iomap.h>
+
+/*
+ * This one maps high address device memory and turns off caching for that area.
+ * it's useful if some control registers are in such an area and write combining
+ * or read caching is not desirable:
+ */
+extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
+				unsigned long prot_val);
+
+/*
+ * The default ioremap() behavior is non-cached:
+ */
+static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
+{
+	return ioremap_nocache(offset, size);
+}
+
+extern void iounmap(volatile void __iomem *addr);
+
+extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys);
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+#define isa_virt_to_bus virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them on x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+void __memcpy_fromio(void *, unsigned long, unsigned);
+void __memcpy_toio(unsigned long, const void *, unsigned);
+
+static inline void memcpy_fromio(void *to, const volatile void __iomem *from,
+				 unsigned len)
+{
+	__memcpy_fromio(to, (unsigned long)from, len);
+}
+
+static inline void memcpy_toio(volatile void __iomem *to, const void *from,
+			       unsigned len)
+{
+	__memcpy_toio((unsigned long)to, from, len);
+}
+
+void memset_io(volatile void __iomem *a, int b, size_t c);
+
+/*
+ * ISA space is 'always mapped' on a typical x86 system, no need to
+ * explicitly ioremap() it. The fact that the ISA IO space is mapped
+ * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
+ * are physical addresses. The following constant pointer can be
+ * used as the IO-area pointer (it can be iounmapped as well, so the
+ * analogy with PCI is quite large):
+ */
+#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
+
+#define flush_write_buffers()
+
+#define BIO_VMERGE_BOUNDARY iommu_bio_merge
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* ASM_X86__IO_64_H */