diff options
Diffstat (limited to 'arch/x86/kernel/acpi/boot.c')
| -rw-r--r-- | arch/x86/kernel/acpi/boot.c | 142 |
1 files changed, 39 insertions, 103 deletions
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 0acbcdf..0061ea2 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -35,6 +35,7 @@ #include <linux/ioport.h> #include <linux/pci.h> +#include <asm/pci_x86.h> #include <asm/pgtable.h> #include <asm/io_apic.h> #include <asm/apic.h> @@ -49,6 +50,7 @@ EXPORT_SYMBOL(acpi_disabled); #ifdef CONFIG_X86_64 # include <asm/proto.h> +# include <asm/numa_64.h> #endif /* X86 */ #define BAD_MADT_ENTRY(entry, end) ( \ @@ -446,6 +448,12 @@ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) { *irq = gsi; + +#ifdef CONFIG_X86_IO_APIC + if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) + setup_IO_APIC_irq_extra(gsi); +#endif + return 0; } @@ -473,7 +481,8 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity); } #endif - acpi_gsi_to_irq(plat_gsi, &irq); + irq = plat_gsi; + return irq; } @@ -481,6 +490,26 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) * ACPI based hotplug support for CPU */ #ifdef CONFIG_ACPI_HOTPLUG_CPU +#include <acpi/processor.h> + +static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid) +{ +#ifdef CONFIG_ACPI_NUMA + int nid; + + nid = acpi_get_node(handle); + if (nid == -1 || !node_online(nid)) + return; +#ifdef CONFIG_X86_64 + apicid_to_node[physid] = nid; + numa_set_node(cpu, nid); +#else /* CONFIG_X86_32 */ + apicid_2_node[physid] = nid; + cpu_to_node_map[cpu] = nid; +#endif + +#endif +} static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu) { @@ -539,7 +568,10 @@ static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu) goto free_new_map; } + acpi_processor_set_pdc(handle); + cpu = cpumask_first(new_map); + acpi_map_cpu2node(handle, cpu, physid); *pcpu = cpu; retval = 0; @@ -1264,23 +1296,6 @@ static int __init dmi_disable_acpi(const struct dmi_system_id *d) } /* - * Limit ACPI to CPU enumeration for HT - */ -static int __init force_acpi_ht(const struct dmi_system_id *d) -{ - if (!acpi_force) { - printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", - d->ident); - disable_acpi(); - acpi_ht = 1; - } else { - printk(KERN_NOTICE - "Warning: acpi=force overrules DMI blacklist: acpi=ht\n"); - } - return 0; -} - -/* * Force ignoring BIOS IRQ0 pin2 override */ static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d) @@ -1316,90 +1331,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { }, /* - * Boxes that need acpi=ht - */ - { - .callback = force_acpi_ht, - .ident = "FSC Primergy T850", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), - DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "HP VISUALIZE NT Workstation", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "Compaq Workstation W8000", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), - DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "ASUS P2B-DS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "ASUS CUR-DLS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "ABIT i440BX-W83977", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"), - DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "IBM Bladecenter", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "IBM eServer xSeries 360", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "IBM eserver xSeries 330", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "IBM eserver xSeries 440", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), - }, - }, - - /* * Boxes that need ACPI PCI IRQ routing disabled */ { @@ -1604,6 +1535,9 @@ int __init acpi_boot_init(void) acpi_table_parse(ACPI_SIG_HPET, acpi_parse_hpet); + if (!acpi_noirq) + x86_init.pci.init = pci_acpi_init; + return 0; } @@ -1628,8 +1562,10 @@ static int __init parse_acpi(char *arg) } /* Limit ACPI just to boot-time to enable HT */ else if (strcmp(arg, "ht") == 0) { - if (!acpi_force) + if (!acpi_force) { + printk(KERN_WARNING "acpi=ht will be removed in Linux-2.6.35\n"); disable_acpi(); + } acpi_ht = 1; } /* acpi=rsdt use RSDT instead of XSDT */ |